Atmospheric- and Low-Level Methane Abatement via an Earth-Abundant Catalyst

Magnetic Exchange Coupling in Zeolite Copper Dimers and Its Contribution to Methane Activation

The highly reactive binuclear [Cu2O]2+ active site in copper zeolites activates the inert C-H bond of methane at low temperatures, offering a potential solution to reduce methane flaring and mitigate atmospheric methane levels. While substantial progress has been made in understanding the activation of methane by this core, one critical aspect, the active site's spin, has remained undetermined. In this study, we use variable-temperature, variable-field magnetic circular dichroism spectroscopy to define the ground state spin of the [Cu2O]2+ active sites in Cu-CHA and Cu-MFI. This novel approach allows for site-selective determination of the magnetic exchange coupling between the two copper centers of specific [Cu2O]2+ cores in a heterogeneous mixture, circumventing the drawbacks of bulk magnetic techniques. These experimental findings are coupled to density functional theory calculations to elucidate magnetostructural correlations in copper zeolites that are different from those of homogeneous binuclear Cu(II) complexes. The different spin states for the [Cu2O]2+ cores have different reactivities governed by how methane approaches the active site. This introduces a new understanding of zeolite topological control on active site reactivity.

Comparing brute force to transition path sampling for gas hydrate nucleation with a flat interface: comments on time reversal symmetry

Fluid to solid nucleation is often investigated with the rare event method transition path sampling (TPS). I claim that the inherent irreversibility of solid nucleation, even at stationary conditions, calls into question TPS's applicability for determining solid nucleation mechanisms, especially for pre-critical behavior. Even when applied to a phenomenon which displays time reversal asymmetry like solid nucleation, TPS is a good means of exploring phase space and giving trends in post-critical structure, and its ability to facilitate nucleation rate and free energy calculations remains outstanding. Forward-only splitting and ratcheting methods such as forward flux sampling are more attractive for understanding nucleation mechanisms as they do not require time reversal symmetry, but at low driving forces may suffer from the same limitations as brute force: they may never make it to the first ratchet. Here I briefly summarize the TPS method and gas hydrate nucleation simulation literature, focusing on topics within both to facilitate a comparison of brute force hydrate nucleation to transition path sampling of hydrate nucleation. Perhaps anecdotally, the brute force technique results in more crystalline trajectories despite having higher driving forces than TPS. I maintain this difference is because of the inherent irreversibility of hydrate nucleation, meaning its pre-critical behavior cannot accurately be determined by the melting trajectories that comprise approximately half of the configurations in TPS's path ensemble.

An alternative catalytic cycle for selective methane oxidation to methanol with Cu clusters in zeolites

The partial oxidation of methane to methanol catalyzed by Cu-exchanged zeolites involves at present a three-step procedure that requires changing reaction conditions along the catalytic cycle. In this work we present an alternative catalytic cycle for selective methane conversion to methanol using as active species small Cu5 clusters supported on CHA zeolite. Periodic DFT calculations show that molecular O2 is easily activated on Cu5 clusters producing bi-coordinated O atoms able to dissociate homolytically a CH bond from CH4 and to react with the radical-like non-adsorbed methyl intermediate formed producing methanol, while competitive overoxidation to CO2 is energetically disfavored. The present mechanistic study opens a new avenue to design catalytic materials based on their ability to stabilize radical species.

Screening Cu-Zeolites for Methane Activation Using Curriculum-Based Training

Machine learning (ML), when used synergistically with atomistic simulations, has recently emerged as a powerful tool for accelerated catalyst discovery. However, the application of these techniques has been limited by the lack of interpretable and transferable ML models. In this work, we propose a curriculum-based training (CBT) philosophy to systematically develop reactive machine learning potentials (rMLPs) for high-throughput screening of zeolite catalysts. Our CBT approach combines several different types of calculations to gradually teach the ML model about the relevant regions of the reactive potential energy surface. The resulting rMLPs are accurate, transferable, and interpretable. We further demonstrate the effectiveness of this approach by exhaustively screening thousands of [CuOCu]2+ sites across hundreds of Cu-zeolites for the industrially relevant methane activation reaction. Specifically, this large-scale analysis of the entire International Zeolite Association (IZA) database identifies a set of previously unexplored zeolites (i.e., MEI, ATN, EWO, and CAS) that show the highest ensemble-averaged rates for [CuOCu]2+-catalyzed methane activation. We believe that this CBT philosophy can be generally applied to other zeolite-catalyzed reactions and, subsequently, to other types of heterogeneous catalysts. Thus, this represents an important step toward overcoming the long-standing barriers within the computational heterogeneous catalysis community.

Palladium Catalysts for Methane Oxidation: Old Materials, New Challenges

ConspectusMethane complete oxidation is an important reaction that is part of the general scheme used for removing pollutants contained in emissions from internal combustion engines and, more generally, combustion processes. It has also recently attracted interest as an option for the removal of atmospheric methane in the context of negative emission technologies. Methane, a powerful greenhouse gas, can be converted to carbon dioxide and water via its complete oxidation. Despite burning methane being facile because the combustion sustains its complete oxidation after ignition, methane strong C-H bonds require a catalyst to perform the oxidation at low temperatures and in the absence of a flame so as to avoid the formation of nitrogen oxides, such as those produced in flares. This process allows methane removal to be obtained under conditions that usually lead to higher emissions, such as under cold start conditions in the case of internal combustion engines. Among several options that include homo- and heterogeneous catalysts, supported palladium-based catalysts are the most active heterogeneous systems for this reaction. Finely divided palladium can activate C-H bonds at temperatures as low as 150 °C, although complete conversion is usually not reached until 400-500 °C in practical applications. Major goals are to achieve catalytic methane oxidation at as low as possible temperature and to utilize this expensive metal more efficiently.Compared to any other transition metal, palladium and its oxides are orders of magnitude more reactive for methane oxidation in the absence of water. During the last few decades, much research has been devoted to unveiling the origin of the high activity of supported palladium catalysts, their active phase, the effect of support, promoters, and defects, and the effect of reaction conditions with the goal of further improving their reactivity. There is an overall agreement in trends, yet there are noticeable differences in some details of the catalytic performance of palladium, including the active phase under reaction conditions and the reasons for catalyst deactivation and poisoning. In this Account we summarize our work in this space using well-defined catalysts, especially model palladium surfaces and those prepared using colloidal nanocrystals as precursors, and spectroscopic tools to unveil important details about the chemistry of supported palladium catalysts. We describe advanced techniques aimed at elucidating the role of several parameters in the performance of palladium catalysts for methane oxidation as well as in engineering catalysts through advancing fundamental understanding and synthesis methods. We report the state of research on active phases and sites, then move to the role of supports and promoters, and finally discuss stability in catalytic performance and the role of water in the palladium active phase. Overall, we want to emphasize the importance of a fundamental understanding in designing and realizing active and stable palladium-based catalysts for methane oxidation as an example for a variety of energy and environmental applications of nanomaterials in catalysis.

Photocatalytic Conversion of Methane: Current State of the Art, Challenges, and Future Perspectives

With 28-34 times the greenhouse effect of CO2 over a 100-year period, methane is regarded as the second largest contributor to global warming. Reducing methane emissions is a necessary measure to limit global warming to below 1.5 °C. Photocatalytic conversion of methane is a promising approach to alleviate the atmospheric methane concentrations due to its low energy consumption and environmentally friendly characteristics. Meanwhile, this conversion process can produce valuable chemicals and liquid fuels such as CH3OH, CH3CH2OH, C2H6, and C2H4, cutting down the dependence of chemical production on crude oil. However, the development of photocatalysts with a high methane conversion efficiency and product selectivity remains challenging. In this review, we overview recent advances in semiconductor-based photocatalysts for methane conversion and present catalyst design strategies, including morphology control, heteroatom doping, facet engineering, and cocatalysts modification. To gain a comprehensive understanding of photocatalytic methane conversion, the conversion pathways and mechanisms in these systems are analyzed in detail. Moreover, the role of electron scavengers in methane conversion performance is briefly discussed. Subsequently, we summarize the anthropogenic methane emission scenarios on earth and discuss the application potential of photocatalytic methane conversion. Finally, challenges and future directions for photocatalytic methane conversion are presented.

Eddy covariance assessment of alternate wetting and drying floodwater management on rice methane emissions

Reducing methane emissions and water use is critical for combating climate change and declining aquifers on food production. Reductions in irrigation water use and methane emissions are known benefits of practicing alternate wetting and drying (AWD) over continuous flooding (CF) water management in lowland rice (Oryza sativa L.) production systems. In a two-year (2020 and 2021) study, methane emissions from large farm-scale (∼50 ha) rice fields managed under CF and AWD in soils dominated by Sharkey clay (Sharkey clay, clay over loamy, montmorillonitic non-acid, thermic Vertic halauepet) were monitored using the eddy covariance method (EC). In the EC system, an open-path laser gas analyzer was used to monitor air methane gas density in the constant flux layer of the atmosphere over the rice-crop canopies. Total water pumped into the field for floodwater management was higher in CF compared to AWD by 24 and 14% in 2020 and 2021, respectively. Considerable variations between seasons in the amount of methane emitted from the CF and AWD treatments were observed: CF emitted 29 and 75 kg ha^-1 and AWD emitted 14 and 34 kg ha^-1 methane in 2020 and 2021, respectively. Notwithstanding, the extent of reduction in methane emissions due to AWD over CF was similar for each crop season (52% in 2020 and 55% in 2021). Rice grain yield harvested differed by only ±2% between AWD and CF. This investigation of large-scale system-level evaluation, using the EC method, confirmed that by practicing AWD floodwater management in rice, water pumped from aquifers could be reduced by about a quarter and methane emissions from rice fields could be cut down by about half without affecting grain yields, thereby promoting sustainable water management and greenhouse gas emission reduction during rice production in the Lower Mississippi Delta.

Oriented External Electric Fields Regurating the Reaction Mechanism of CH4 Oxidation Catalyzed by Fe(IV)-Oxo-Corrolazine: Insight from Density Functional Calculations

Methane is the simplest alkane and can be used as an alternative energy source for oil and coal, but the greenhouse effect caused by its leakage into the air is not negligible, and its conversion into liquid methanol not only facilitates transportation, but also contributes to carbon neutrality. In order to find an efficient method for converting methane to methanol, CH₄ oxidation catalyzed by Fe(IV)-Oxo-corrolazine (Fe(IV)-Oxo-Cz) and its reaction mechanism regulation by oriented external electric fields (OEEFs) are systematically studied by density functional calculations. The calculations show that Fe(IV)-Oxo-Cz can abstract one H atom from CH₄ to form the intermediate with OH group connecting on the corrolazine ring, with the energy barrier of 25.44 kcal mol⁻¹. And then the product methanol is formed through the following rebound reaction. Moreover, the energy barrier can be reduced to 20.72 kcal mol⁻¹ through a two-state reaction pathway. Furthermore, the effect of OEEFs on the reaction is investigated. We found that OEEFs can effectively regulate the reaction by adjusting the stability of the reactant and the transition state through the interaction of electric field-molecular dipole moment. When the electric field is negative, the energy barrier of the reaction decreases with the increase of electric intensity. Moreover, the OEEF aligned along the intrinsic Fe‒O reaction axis can effectively regulate the ability of forming the OH on the corrolazine ring by adjusting the charges of O and H atoms. When the electric field intensity is −0.010 a.u., the OH can be directly rebounded to the CH₃· before it is connecting on the corrolazine ring, thus forming the product directly from the transition state without passing through the intermediate with only an energy barrier of 17.34 kcal mol⁻¹, which greatly improves the selectivity of the reaction.