Aggregation-Induced Emission Active Polyacrylates via Cu-Mediated Reversible Deactivation Radical Polymerization with Bioimaging Applications

Polymer Nanoparticles for Preferential Delivery of Drugs Only by Exploiting the Slightly Elevated Temperature of Cancer Cells and Real-Time Monitoring of Drug Release

Rapid proliferation and a faster rate of glycolysis in cancer cells often result in an elevated local temperature (40-43 °C) at the tumor site. Nanoparticles prepared from polymers with two lower critical solution temperatures (LCSTs) can be utilized to take advantage of this subtle temperature elevation to deliver anticancer drugs preferably to the cancer cells, thereby enhancing the overall therapeutic efficacy and reducing side effects. In this direction, we synthesized N-vinyl-2-pyrrolidone (NVP) and substituted NVP (sub-NVP: C2-NVP, C4-NVP)-based polymers with precisely controlled LCSTs by varying the ratio of NVP and sub-NVP. The first LCST (LCST1) was kept below 37 °C to promote self-assembly, drug loading, and structural stability in physiological conditions and the second LCST (LCST2) was in the range of 40-43 °C to ensure mild hyperthermia-induced drug release. Additionally, covalent attachment of tetraphenylethylene (TPE, AIEgen) resulted in aggregation-induced emission in thermoresponsive micellar nanoparticles in which TPE acted as a Förster Resonance Energy Transfer (FRET) pair with the loaded anticancer drug doxorubicin (DOX). Tracking of FRET-induced fluorescence recovery of TPE molecules was utilized to confirm the real-time thermoresponsive release of DOX from nanoparticles and eventual localization of TPE in the cytoplasm and DOX in the nucleus. In vitro cellular studies such as cytotoxicity, cellular uptake, and thermoresponsive drug release showed that the DOX-loaded polymeric nanoparticles were nontoxic to normal cells (HEK-293) but significantly more effective in cancer cells (MCF-7) at 40 °C. To our knowledge, this is the first report of preferential delivery of anticancer drugs only by exploiting the slightly elevated temperature of cancer cells.

Quasi-Chromophores Segregated by Single-Chain Nanoparticles of Fluorinated Zwitterionic Random Copolymers Showing Remarkably Enhanced Fluorescence Emission Capable of Fluorescent Cell Imaging

Organic and polymer fluorescent nanomaterials are a frontier research focus. Here in this work, a series of fluorinated zwitterionic random copolymers end-attached with a quasi-chromophoric group of pyrene or tetraphenylethylene (TPE) are well synthesized via atom transfer radical polymerization with activators regenerated by electron transfer (ARGET ATRP). Those random copolymers with total degree of polymerization 100 or 200 are able to produce fluorescent single-chain nanoparticles (SCNPs) through intra-chain self-folding assembly with quite uniform diameters in the range of 10-20 nm as characterized by dynamic light scattering and transmission electron microscopy. By virtue of the segregation or confinement effect, both SCNPs functionalized with pyrene or TPE group are capable of emitting fluorescence, with pyrene tethered SCNPs exhibiting stronger fluorescence emission reaching the highest quantum yield ≈20%. Moreover, such kind of fluorescent SCNPs manifest low cytotoxicity and good cell imaging performance for Hela cells. The creation of fluorescent SCNPs through covalently attached one quasi-chromophore to the end of one fluorinated zwitterionic random copolymer provides an alternative strategy for preparing polymeric luminescence nanomaterials, promisingly serving as a new type of fluorescent nanoprobes for biological imaging applications.

Helical Self-Assembly and Fe3+ Detection of V-Shaped AIE-Active Chiral Tetraphenylbutadiene-Based Polyamides

Chiral aggregation-induced emission (AIE) molecules have drawn attention for their helical self-assembly and special optical properties. The helical self-assembly of AIE-active chiral non-linear main-chain polymers can produce some desired optical features. In this work, a series of V-shaped chiral AIE-active polyamides P1-C3, P1-C6, P1-C12 and linear P2-C3, P2-C6, bearing n-propyl/hexyl/dodecyl side-chains, based on tetraphenylbutadiene (TPB), were prepared. All target main-chain polymers exhibit distinct AIE characteristics. The polymer P1-C6 with moderate length alkyl chains shows better AIE properties. The V-shaped main-chains and the chiral induction of (1R,2R)-(+)-1,2-cyclohexanediamine in each repeating unit promote the polymer chains display helical conformation, and multiple helical polymer chains induce nano-fibers helicity when the polymer chains aggregate and self-assemble in THF/H2 O mixtures. Simultaneously, the helical conformation polymer chains and helical nano-fibers cause P1-C6 produce strong circular dichroism (CD) signals with positive Cotton effect. Moreover, P1-C6 could also occur fluorescence quenching response to Fe3+ selectively with a low detection limit of 3.48 μmol/L.

Polymerization-induced emission (PIE) of multifunctional polyamides synthesized by Ugi polymerization and targeted imaging of lysosomes

In this paper, a series of polyamide derivatives (PAMs) containing morpholine groups were prepared by Ugi polymerization from dialdehyde, diacid, N-(2-aminoethyl)-morpholine and isonitrile compounds as novel multi-responsive fluorescent sensors. As non-conjugated light-emitting polymers, PAMs were endowed with unique polymerization-induced emission (PIE) performance at 450 nm by through-space conjugation (TSC) between heteroatoms and heterocycles. It was also found that PAMs exhibited reversible responses to the external temperature and pH values and became responsive fluorescent switches. In addition, PAMs can specifically recognize Fe³⁺ with a limit of detection (LOD) of 54 nM and the introduction of EDTA reversibly restores the fluorescence of the quenched PAMs-Fe³⁺ system. By virtue of thermosensitivity, PAMs are easily separated from the above system by changing the temperature above or below the lower critical solution temperature (LCST). It is worth noting that PIE-active PAMs with good biocompatibility can selectively accumulate in lysosomes due to the presence of morpholine groups, and its Pearson colocalization coefficient is as higher as 0.91. Furthermore, a PIE-active PAM was successfully used to track exogenous Fe³⁺ in lysosomes. In conclusion, these multi-functional PIE-active PAMs have higher potential applications in biomedical or environmental fields.

Multi Stimuli-Responsive Aggregation-Induced Emission Active Polymer Platform Based on Tetraphenylethylene-Appended Maleic Anhydride Terpolymers

Multi stimuli-responsive aggregation-induced emission (AIE) active polymers have great application prospects in high-tech innovations. Herein, three types of tetraphenylethylene (TPE)-containing monomers were synthesized and utilized in preparing TPE-appended maleic anhydride terpolymers. After hydrolysis, the produced TPE-appended maleic acid terpolymers have identical linear charge densities but different "primary" structures, which created widely varied microenvironments around the carboxylate and TPE groups. Benefiting from the synergistic interaction of the TPE moiety and the terpolymer conformation change, the TPE-appended maleic acid terpolymers exhibited fluorescence changes in response to multi stimuli, including pH, ionic strength, Ca²⁺, and bovine serum albumin. On both the "signaling" and the "stimuli acceptor" sides, the multi stimuli-responsive fluorescence behavior was influenced markedly by the terpolymer primary structure. The fundamental insights gained in the present work are important for developing an efficient and versatile stimuli-responsive AIE-active polymer platform for chemo-sensing, bioimaging, and so on.

Brush-like Polymer Prodrug with Aggregation-Induced Emission Features for Precise Intracellular Drug Tracking

In this study, a brush-like polymer with aggregation-induced emission (AIE) features was synthesized for drug delivery and intracellular drug tracking. The polymer consisting of tetraphenylethene (TPE) chain-end as well as oligo-poly (ethylene glycol) (PEG) and hydrazine functionalities was successfully synthesized through copper (0)-mediated reversible-deactivation radical polymerization (Cu0-mediated RDRP). Anticancer drug doxorubicin (DOX) was conjugated to the polymer and formed a prodrug named TPE-PEGA-Hyd-DOX, which contains 11% DOX. The hydrazone between DOX and polymer backbone is a pH-sensitive linkage that can control the release of DOX in slightly acidic conditions, which can precisely control the DOX release rate. The drug release of 10% after 96 h in normal cell environments compared with about 40% after 24 h in cancer cell environments confirmed the influence of the hydrazone bond. The ratiometric design of fluorescent intensities with peaks at 410 nm (emission due to AIE feature of TPE) and 600 nm (emission due to ACQ feature of DOX) provides an excellent opportunity for this product as a precise intracellular drug tracker. Cancer cells confocal microscopy showed negligible DOX solution uptake, but an intense green emission originated from prodrug uptake. Moreover, a severe red emission in the DOX channel confirmed a promising level of drug release from the prodrug in the cytoplasm. The merged images of cancer cells confirmed the high performance of the TPE-PEGA-Hyd-DOX compound in the viewpoints of cellular uptake and drug release. This polymer prodrug successfully demonstrates low cytotoxicity in healthy cells and high performance in killing cancer cells.

Well-defined polyacrylamides with AIE properties via rapid Cu-mediated living radical polymerization in aqueous solution: thermoresponsive nanoparticles for bioimaging

There is a requirement for the development of methods for the preparation of well-controlled polymers with aggregation-induced emission (AIE) properties.

AIE-active macromolecules: designs, performances, and applications

Aggregation-induced emission (AIE) macromolecules as emerging luminescent materials gained increasing attention owing to their good processability, high brightness, wide functionality, and smart responsiveness, with great potential in many fields.

Fluorescent homopolypeptide toroids

Toroids are important ring-like nanostructures in living systems; intrinsically luminogenic toroids are promising in bioimaging but it is challenging to synthesize such nanoparticles. Herein, we report a fluorescent toroid that...

The block copolymer shuffle in size exclusion chromatography: the intrinsic problem with using elugrams to determine chain extension success

Is an increase in hydrodynamic volume always expected in block copolymer synthesis? Why SEC is sometimes not the last word.

Self-healing and mechanical performance of dynamic glycol chitosan hydrogel nanocomposites

Evaluation of Schiff base nanocomposite hydrogels properties using a benzaldehyde multifunctional amphiphilic polyacrylamide crosslinker in conjunction with glycol chitosan.