Light-Triggered Reversible Self-Engulfing of Janus Nanoparticles

Temperature-Sensitive Janus Particles PEG/SiO2/PNIPAM-PEA: Applications in Foam Stabilization and Defoaming

The current study presents a scalable approach for the preparation of temperature-responsive PEG/SiO2/PNIPAM-PEA Janus particles and, for the first time, investigates their potential applications in stabilizing foam and defoaming by adjusting the temperature. The method utilizes a (W1 + O)/W2 emulsion system, which incorporates appropriate surfactants to stabilize the emulsion and prevent rapid dissolution of the hydrophilic triblock polymer PEG-b-PTEPM-b-PNIPAM in water. The PEG/SiO2/PNIPAM-PEA Janus particles with temperature-responsive characteristics were synthesized in a single step that combined the sol-gel reaction and photoinduced free radical polymerization. The contact angle of the hydrophilic PEG/SiO2/PNIPAM surface was measured to be 54.7 ± 0.1°, while the contact angle of the hydrophobic PEA surface was found to be 122.4 ± 0.1°. By incorporating PEG/SiO2/PNIPAM-PEA Janus particles at a temperature of 25 °C, the foam's half-life is significantly prolonged from 42 s to nearly 30 min. However, with an increase in temperature to 50 °C, the foam's half-life rapidly diminished to only 44 s. This innovative application effectively enhances foam stabilization at low temperatures and facilitates the rapid dissipation of foam at high temperatures.

Transformation of Amorphous Nanobowls to Crystalline Ellipsoids Induced by Trans-Cis Isomerization of Azobenzene

The stimuli-responsive transition of nanostructures from amorphous to crystalline state is of high interest in polymer science, but is still challenging. Herein, we demonstrate the transformation of amorphous nanobowls to crystalline ellipsoids triggered by UV induced trans-cis isomerization, using an azobenzene-containing amphiphilic homopolymer (PAzoAA) as building block. The amide bond and azobenzene pendants are introduced to the side chain of PAzoAA to afford hydrogen bonding and π-π interaction, which promotes the formation of nanobowls rather than spherical nanostructures. Upon exposed to UV irradiation, trans-cis isomerization of azobenzene pendants occurs, leading to the increase of hydrophilicity and destruction of π-π interaction, further resulting in the disassembly of the nanobowls. Then the PAzoAA re-assembles to form crystalline ellipsoids instead of amorphous nanostructures when recovered at 70°C without UV light. We further confirm that the high incubation temperature after UV irradiation is critical for the cis-trans transformation and the high mobility of the polymer chains to facilitate the regular rearrangement of azobenzene pendants. Overall, we propose a facile method to achieve the transformation of amorphous nanobowls to crystalline ellipsoids, which may bring new insight into preparation of crystalline nanoparticles using amorphous precursors. This article is protected by copyright. All rights reserved.

Polymeric nanostructures based on azobenzene and their biomedical applications: synthesis, self-assembly and stimuli-responsiveness

Amphiphilic polymers can self-assemble to form nanoparticles with different structures under suitable conditions. Polymer nanoparticles functionalized with aromatic azo groups are endowed with photo-responsive properties. In recent years, a variety of photoresponsive polymers and nanoparticles have been developed based on azobenzene, using different molecular design strategies and synthetic routes. This article reviews the progress of this rapidly developing research field, focusing on the structure, synthesis, assembly and response of photo-responsive polymer assemblies. According to the molecular structure, photo-responsive polymers can be divided into linear polymers containing azobenzene in a side chain, linear polymers containing azobenzene in the main chain, linear polymers containing azobenzene in an end group, branched polymers containing azobenzene and supramolecular polymers containing azobenzene. These systems have broad biomedical application prospects in the field of drug delivery and imaging applications.

Amphiphilic Asymmetric Diblock Copolymer with pH-Responsive Fluorescent Properties

Stimuli-responsive polymers with changeable fluorescent properties have numerous applications in sensing, bioimaging, and detection. Here we describe the facile synthesis of a pH-responsive amphiphilic asymmetric diblock copolymer of acrylic acid and butyl acrylate that incorporates a polarity-sensitive fluorophore. The asymmetric structure enhances the stimuli-responsive behavior: as the environmental pH decreases, the fluorescent intensity of the asymmetric diblock copolymer gradually increases, whereas its symmetric block counterpart shows limited and stepwise change. Besides, this remarkable difference was demonstrated to be concentration-independent, as similar emission behavior was found for both polymers at lower concentrations. These results indicate that the fluorescence properties of the copolymer can be adjusted by rationally designing the copolymer structure. This work provides a novel and general strategy for the design and synthesis of polymeric materials with encapsulated structures showing stimuli-responsive fluorescent properties to be applied as fluorescent probes with a smoothly varying response curve rather than the simple on-off switch that is typical of block copolymer systems.

Janus Nanoparticles: From Fabrication to (Bio)Applications

Janus nanoparticles (JNPs) refer to the integration of two or more chemically discrepant composites into one structure system. Studies into JNPs have been of significant interest due to their interesting characteristics stemming from their asymmetric structures, which can integrate different functional properties and perform more synergetic functions simultaneously. Herein, we present recent progress of Janus particles, comprehensively detailing fabrication strategies and applications. First, the classification of JNPs is divided into three blocks, consisting of polymeric composites, inorganic composites, and hybrid polymeric/inorganic JNPs composites. Then, the fabrication strategies are alternately summarized, examining self-assembly strategy, phase separation strategy, seed-mediated polymerization, microfluidic preparation strategy, nucleation growth methods, and masking methods. Finally, various intriguing applications of JNPs are presented, including solid surfactants agents, micro/nanomotors, and biomedical applications such as biosensing, controlled drug delivery, bioimaging, cancer therapy, and combined theranostics. Furthermore, challenges and future works in this field are provided.

Gold nanoparticles grafted with chemically incompatible ligands

Janus-type structures were obtained from gold nanoparticles grafted with two types of chemically incompatible mesogenic ligands with a strong tendency for nano-segregation. A lamellar arrangement, in which metallic nanoparticle-rich sublayers are separated by organic ligand-rich sublayers of various composition, was formed due to the ligand segregation process. The layers could be easily aligned by mechanical shearing; for most materials the layer normal was parallel to the shearing direction but perpendicular to the shearing gradient, such transverse mode is only rarely observed for lamellar materials. Reversible changes of layer thickness under UV light were observed due to the presence of an azo-moiety in the organic ligand molecules.

The self-assembly of single chain Janus nanoparticles from azobenzene-containing block copolymers and reversible photoinduced morphology transitions

Azobenzene-containing liquid crystalline single chain Janus nanoparticles (LC-SCJNPs) were employed as building blocks to construct assemblies showing a reversible photoinduced morphology transition.

Synthesis of azobenzene-containing liquid crystalline block copolymer nanoparticles via polymerization induced hierarchical self-assembly

A facile synthesis of non-spherical photoresponsive azobenzene-containing liquid crystalline nanoparticles via polymerization-induced hierarchical self-assembly (PIHSA).

Synthesis and self-assembly of photo-responsive polypeptoid-based copolymers containing azobenzene side chains

Photo-responsive polypeptoid-based copolymers containing azobenzene side chains have been well synthesized and they could self-assemble into tunable nanostructures with reversible light-switched behaviors.

In Situ Controlled Construction of a Hierarchical Supramolecular Chiral Liquid-Crystalline Polymer Assembly

Hierarchical supramolecular chiral liquid-crystalline (LC) polymer assemblies are challenging to construct in situ in a controlled manner. Now, polymerization-induced chiral self-assembly (PICSA) is reported. Hierarchical supramolecular chiral azobenzene-containing block copolymer (Azo-BCP) assemblies were constructed with π-π stacking interactions occurring in the layered structure of Azo smectic phases. The evolution of chirality from terminal alkyl chain to Azo mesogen building blocks and further induction of supramolecular chirality in LC BCP assemblies during PICSA is achieved. Morphologies such as spheres, worms, helical fibers, lamellae, and vesicles were observed. The morphological transition had a crucial effect on the chiral expression of Azo-BCP assemblies. The supramolecular chirality of Azo-BCP assemblies destroyed by 365 nm UV irradiation can be recovered by heating-cooling treatment; this dynamic reversible achiral-chiral switching can be repeated at least five times.

Chiral Photonic Liquid Crystalline Polyethers with Widely Tunable Helical Superstructures

Liquid crystalline polymers with tunable structures on the scale of visible wavelength are important in optical technology due to their enhanced mechanical stability, processability, and structural integrity. Herein, we report a series of cholesteric liquid crystalline (CLC) polyethers with a widely tunable pitch length and a broad CLC phase window through a bottom-up structural design. The well-defined multicomponent polyethers were successfully synthesized by utilizing monomer-activated anionic ring-opening polymerization. Through adjustment of the composition of chiral cholesteryl (Ch) and photochromic azobenzene (Az) mesogenic moieties, rich phase behaviors have been discovered, and a phase boundary diagram was constructed consequently, wherein cholesteric helical superstructures in a broad composition range and temperature window straight down to the glassy state at room temperature were achieved. Particularly, the planar oriented helical superstructures can exhibit widely tunable and switchable reflections over the entire visible range across red, green, and blue colors through temperature and light control, which are closely related to the extraordinary flexibility of the polyether backbone. Their thermo-light dual-responsive properties provide an alternative opportunity to fabricate smart and switchable polymeric LC materials for optical applications.

Optically Active Janus Particles Constructed by Chiral Helical Polymers through Emulsion Polymerization Combined with Solvent Evaporation-Induced Phase Separation

Polymer Janus particles (PJPs) have been extensively investigated due to their intriguing features which cannot be achieved in traditional counterparts. Chiral polymer particles also have constituted a unique research area in polymer science. However, how to construct PJPs derived from chiral polymers, especially chiral helical polymers, still remains a significant academic challenge. This contribution reports the first success in preparing optically active PJPs constructed by chiral helical substituted polyacetylene via emulsion polymerization combined with solvent evaporation to induce phase separation. In emulsion polymerization systems, polymethyl methacrylate worked as a template and separated from polyacetylene domains in the course of acetylenic monomers' polymerization and evaporation of the solvent, by which optically active PJPs were formed. The major influencing factors were explored to elucidate their effects on the formation and morphology of PJPs. Mushroom- and bowl-like PJPs were obtained. Scanning electron microscopy (SEM) images ascertain nonspherical morphologies of the obtained PJPs. Circular dichroism and UV-vis absorption spectra demonstrate their optical activity, which originated in the predominantly one-handed helical polyacetylene chains constructing the PJPs. A formation mechanism was then proposed for understanding this unprecedented type of PJPs.

One-Pot Synthesis of Cross-linked Block Copolymer Nanowires via Polymerization-Induced Hierarchical Self-Assembly and Photodimerization

Block copolymer (BCP) nanowires are crucially important in diversified fields. However, their applications typically suffer from a tedious fabrication process, heterogeneous morphology, and degradation. Herein, we propose a facile and robust approach to synthesize stilbene-containing BCP nanowires in homogeneous morphology with high stability at high solid content (5%-20% w/w) in one pot. It is realized by the polymerization-induced hierarchical self-assembly and subsequent photodimerization cross-linking under UV irradiation of stilbene mesogens in the core-forming block in the later stage of polymerization. Because of the strong liquid crystalline ordering and photodimerization of stilbene, the cross-linked nanowires can be obtained over a broad BCP composition, which show robust morphological stability when exposed to solvent dissolution tests and water dispersion stability tests. This efficient approach to stabilized nanowires with homogeneous morphology via in situ cross-linking would be useful in various fields, such as nanomedicine and Pickering emulsifiers.

Light and latex: advances in the photochemistry of polymer colloids

Unparalleled temporal and spatial control of colloidal chemical processes introduces immense potential for the manufacturing, modification, and manipulation of latex particles.

Anisotropic Nano-/Microparticles from Diversified Copolymers by Solvent-Mediated Self-Assembly

Effective synthesis of anisotropic nano-/microparticles (APs) by the copolymers is of great significance in nanomaterials and nanotechnology. However, achieving regulation of the morphology, composition, property, and particle size of anisotropic nano-/microparticles (APs) with diversified copolymers is difficult due to complex mechanism and formation conditions. In this work, a versatile one-pot solvent-mediated self-assembly (SmSa) strategy had been proposed for the facile one-pot synthesis of shape-tunable anisotropic nano-/microparticles (StAPs). In addition, the formation mechanism of StAPs was determined through numerous characterization methods related to morphology and element distribution. The results revealed that the anisotropic architectures of StAPs were closely related to the nature of poly(methylacrylic acid-methyl methacrylate-butyl acrylate) (L₁) and poly(butyl acrylate-styrene) (L₂) polymer chains imparted by polymer blocks of different domains. Therefore, the ordered assembly of the rigid and hydrophobic L₂ polymer chains in micelles consisting of the flexible and amphiphilic L₁ and solvent could be successfully carried out under the mediation of increasing solvent polarity and the strong adsorption of poly(vinylpyrrolidone) for L₂. Furthermore, the developed versatile SmSa strategy and the obtained StAPs play an essential role in the development of nanoscience and nanotechnology. Particularly given its adjustable emulsifying properties at different pH values, as well as numerous sites for further modification by fluorescent or other components, it can be employed to synthesize a wide range of functional materials.

Light-Triggered Reversible Slimming of Azobenzene-Containing Wormlike Nanoparticles Synthesized by Polymerization-Induced Self-Assembly for Nanofiltration Switches

Photoresponsive wormlike block copolymer nanoparticles (NPs) have potential applications in versatile fields, but their preparation suffers from narrow worm phase region and tedious approaches. In this work, azobenzene-containing wormlike NPs based on poly(methylacrylic acid)-b-poly(4-((4-butylphenyl)diazenyl)phenyl methacrylate) are prepared via polymerization-induced self-assembly at high solids concentration in ethanol. The pure wormlike NPs occupy a remarkably broad region in the morphological phase diagram because of the rigid nature of the core-forming block. These wormlike NPs expand resulting from trans-cis transformation upon UV irradiation, and slim near to the original state via visible light irradiation. The diameter and its variation amplitude of worms increase with the chain length of core-forming block. Moreover, a nanofiltration switch for rhodamine B is assembled to illustrate one of its potential applications by remote trigger using light.

Solution Self-Assembly of an Alternating Copolymer toward Hollow Carbon Nanospheres with Uniform Micropores

Controllable preparation of porous hollow carbon spheres (HCSs) has attracted considerable attention due to their potential applications, e.g., in energy conversion and storage. We report for the first time the synthesis of narrowly size-distributed HCSs with uniform micropores in the wall, through a simple template-free approach, which employs the solution self-assembly of an alternating copolymer (poly(9,9'-bis(4-glycidyloxyphenyl)fluorene-alt-2,3-dihydroxy-butylene dithioether) (P(BGF-a-DHBDT))). This alternating copolymer first self-assembled into previously undocumented hollow polymeric spheres (HPSs) in an N,N-dimethylformamide (DMF)/H₂O solvent mixture. After the cross-linking of the BGF segments in the spheres, the stabilized HPSs (CL-HPSs) were carbonized at 800 °C under N₂ atmosphere, yielding porous HCSs with uniform micropores of very narrow size distribution (0.4-0.8 nm) in the wall, benefiting from the uniform DHBDT block length in the alternating copolymer. Through KOH activation, which made the internal pores fully interconnected, uniform micropores (0.5-1.0 nm) of a narrow size distribution were retained within the activated HCSs (A-HCSs), while their specific surface areas (SSAs) were much increased to 2580 m² g^-1. As a proof of concept, the A-HCSs were applied as electrode materials of supercapacitors. They exhibited superior electrochemical performance with a high specific capacitance (292 F g^-1 at 0.2 A g^-1), good rate capability, and outstanding cycling stability with no apparent capacitance loss after 10 000 cycles.