Light-Triggered Reversible Slimming of Azobenzene-Containing Wormlike Nanoparticles Synthesized by Polymerization-Induced Self-Assembly for Nanofiltration Switches

Mesogenic Ordering-Driven Self-Assembly of Liquid Crystalline Block Copolymers in Solution

With the development of nanotechnology, the preparation of polymeric nanoparticles with nicely defined structures has been well-developed, and the functionalization and subsequent applications of the resultant nanostructures are becoming increasingly important. Particularly, by introducing mesogenic ordering as the driving force for the solution-state self-assembly of liquid crystalline (LC) block copolymers (BCPs), micellar nanostructures with different morphologies, especially anisotropic morphologies, can be easily prepared. This review summarizes the recent progress in the solution-state self-assembly of LC BCPs and is mostly focused on four main related aspects, including an in-depth understanding of the mesogenic ordering-driven self-assembly, precise assembly methods, utilization of these methods to fabricate hierarchical structures, and the potential applications of these well-defined nanostructures. We hope not only to make a systematic summary of previous studies but also to provide some useful thinking for the future development of this field.

Self-assembly of amphiphilic asymmetric comb-like copolymers with responsive rigid side chains

Amphiphilic asymmetric comb-like copolymers (AACCs) exhibit distinct self-assembly behaviours due to their unique architecture. However, the synthetic difficulties of well-defined AACCs have prohibited a systematic understanding of the architecture-morphology relationship. In this work, we conducted dissipative particle dynamics simulations to investigate the self-assembly behaviours of AACCs with responsive rigid side chains in selective solvents. The effects of side chain length, number of branches, and spacers on the morphology of aggregates were investigated by mapping out morphology diagrams. Besides, the numbers and surface areas of aggregates clearly depicted the morphological transitions during the self-assembly process. Moreover, the rod-to-coil conformation transitions were simulated to explore the stimuli-responsive behaviour of the AACCs with responsive rigid side chains by adjusting the bond angle parameter of the rigid chains. The results indicated that without the support of the rigid chains, the assembly structure collapsed, leading to the tube-to-channelized micelles and one-compartment-to-multicompartment vesicle morphology transformations. The simulation results are consistent with earlier experimental results, which can provide theoretical guidance for assembly toward desired nanostructures.

Recent Progress in Azobenzene-Based Supramolecular Materials and Applications

Azobenzene-containing small molecules and polymers are functional photoswitchable molecules to form supramolecular nanomaterials for various applications. Recently, supramolecular nanomaterials have received enormous attention in material science because of their simple bottom-up synthesis approach, understandable mechanisms and structural features, and batch-to-batch reproducibility. Azobenzene is a light-responsive functional moiety in the molecular design of small molecules and polymers and is used to switch the photophysical properties of supramolecular nanomaterials. Herein, we review the latest literature on supramolecular nano- and micro-materials formed from azobenzene-containing small molecules and polymers through the combinatorial effect of weak molecular interactions. Different classes including complex coacervates, host-guest systems, co-assembled, and self-assembled supramolecular materials, where azobenzene is an essential moiety in small molecules, and photophysical properties are discussed. Afterward, azobenzene-containing polymers-based supramolecular photoresponsive materials formed through the host-guest approach, polymerization-induced self-assembly, and post-polymerization assembly techniques are highlighted. In addition to this, the applications of photoswitchable supramolecular materials in pH sensing, and CO2 capture are presented. In the end, the conclusion and future perspective of azobenzene-based supramolecular materials for molecular assembly design, and applications are given.

Chimeric Peptide Engineered Nanomedicine for Synergistic Suppression of Tumor Growth and Therapy-Induced Hyperlipidemia by mTOR and PCSK9 Inhibition

Chemotherapy-induced side effects restrain anti-tumor efficiency, with hyperlipidemia being the most common accompanying disease to cause treatment failure. In this work, a chimeric peptide-engineered nanomedicine (designated as PRS) was fabricated for the synergistic suppression of tumor growth and therapy-induced hyperlipidemia. Within this nanomedicine, the tumor matrix-targeting peptide palmitic-K(palmitic)CREKA can self-assemble into a nano-micelle to encapsulate Rapamycin (mTOR inhibitor) and SBC-115076 (PCSK9 inhibitor). This PRS nanomedicine exhibits a uniform nano-distribution with good stability which enhances intracellular drug delivery and tumor-targeting delivery. Also, PRS was found to synergistically inhibit tumor cell proliferation by interrupting the mTOR pathway and reducing Rapamycin-induced hyperlipidemia by increasing the production of LDLR. In vitro and in vivo results demonstrate the superiority of PRS for systematic suppression of tumor growth and the reduction of hyperlipidemia without initiating any other toxic side effects. This work proposes a sophisticated strategy to inhibit tumor growth and also provides new insights for cooperative management of chemotherapy-induced side effects.

Sequence effect on the self-assembly of discrete amphiphilic co-oligomers with fluorene-azobenzene semirigid backbones

Sequences can have a dramatic impact on the unique properties and self-assembly in natural macromolecules, which has received increasing interest. Herein, we report a series of discrete amphiphilic co-oligomers with the same composition but different building blocks in a semirigid backbone. These sequence-defined oligomers possess two primary amine groups on the side chain of the azobenzene building block, and hence, they become amphipathic due to quaternization of the amine groups when protonated in acidic aqueous solution. These oligomer isomers assembled into different nanoparticles, including nanofibers, hollow vesicles and spherical micellar complexes, in a THF/water/HCl mixture under the same conditions. UV-vis absorption spectra, differential scanning calorimetry (DSC) and X-ray scattering (XRD) experiments combined with theoretical calculations reveal that the sequence-controlled co-oligomers induce different molecular packing conformations and arrangement modes of building blocks in self-assembly. Furthermore, these self-assembled nanoparticles demonstrate photoresponsive morphological transformation and fluorescence emission under UV light irradiation due to trans-to-cis photoisomerization of azobenzene. This work demonstrates that customizing functional nanoparticles can be achieved by controlling the sequence structure in synthetic co-oligomers.

Mimicking the Natural World with Nanoarchitectonics for Self-Assembled Superstructures

Scientists are often inspired by nature, where naturally occurring morphologies, such as those that resemble animals and plants, can be created in the lab. In this review, we have provided an overview on complex superstructures of animals, plants and some similar shapes from the natural world. We begin this review with a discussion about the formation of various animal-like shapes from small organic molecules and polymers, and then move onto plants and other selected shapes. Literature surveys reveal that most of the polymers studied tend to form micellar structures, with some exceptions. Nevertheless, small organic molecules tend to form not only micellar structures but also other animal shapes such as worms and caterpillars. These superstructures tend to have high surface areas and variable surface morphology, making them very useful material for applications in various field such as catalysis, solar cells, and biomedicine, amongst others.

Light- and Redox-Responsive Block Copolymers of mPEG-SS-ONBMA as a Smart Drug Delivery Carrier for Cancer Therapy

The development of stimuli-responsive polymeric micelles for targeted drug delivery has attracted much research interest in improving therapeutic outcomes. This study designs copolymers responsive to ultraviolet (UV) light and glutathione (GSH). A disulfide linkage is positioned between a hydrophilic poly(ethylene glycol) monomethyl ether (mPEG) and a hydrophobic o-nitrobenzyl methacrylate (ONBMA) to yield amphiphilic copolymers termed mPEG-SS-pONBMA. Three copolymers with different ONBMA lengths are synthesized and formulated into micelles. An increase in particle size and a decrease in critical micelle concentration go together with increasing ONBMA lengths. The ONB cleavage from mPEG-SS-pONBMA-formed micelles results in the transformation of hydrophobic cores into hydrophilic ones, accelerating drug release from the micelles. Obvious changes in morphology and molecular weight of micelles upon combinational treatments account for the dual-stimuli responsive property. Enhancement of a cell-killing effect is clearly observed in doxorubicin (DOX)-loaded micelles containing disulfide bonds compared with those containing dicarbon bonds upon UV light irradiation. Collectedly, the dual-stimuli-responsive mPEG-SS-pONBMA micelle is a better drug delivery carrier than the single-stimuli-responsive mPEG-CC-pONBMA micelle. After HT1080 cells were treated with the DOX-loaded micelles, the high expression levels of RIP-1 and MLKL indicate that the mechanism involved in cell death is mainly via the DOX-induced necroptosis pathway.

Bending-Insensitive Intrinsically Flexible Ultraviolet Encoding Devices Based on Piezoelectric Nanogenerator-Supplied Liquid Crystalline Polymer Fabrics

It is significantly challenging for state-of-the-art wearable electronics to stably monitor physicochemical signals under dynamic motions. Herein, a bending-insensitive, self-powered, and intrinsically flexible UV detector has been realized based on well-designed oriented composite fabrics, consisting of ionic liquid (IL)-containing liquid crystalline polymers (ILCPs) and piezoelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] nanogenerators. The novel composite fabrics establish effective UV illuminance-internal stress-electric signal conversion by coupling resistive and piezoelectric effects, with a fast response time of 190 ms. Particularly, benefiting from the intrinsic flexibility of composite fabrics, the ILCP/P(VDF-TrFE) device can maintain stable performance under dynamic bending even if the frequency is up to 2.5 Hz, with a bending insensitivity of less than 1% performance variation under 1.0 mW cm^-2 UV light. Combined with the Internet of Things and the American Standard Code for Information Interchange (ASCII), wearable encoding electronics have been successfully implemented with a printing speed of 3.2 s per character under dynamic bending.

Reversible Controlling the Supramolecular Chirality of Side Chain Azobenzene Polymers: chiral Induction and Modulation

Chirality represents a fundamental structure in nature, the induction and reversible modulation of supramolecular chirality with feasible techniques is of great value in the design of new chiroptical smart materials. Herein, two kinds of azobenzene side-chain polymers (without spacer: Azo-PMA0; with 6 spacers: Azo-PMA6) were synthesized, the length of spacer and azobenzene chromophores play a vital role in chirality transfer and modulation. The supramolecular chiral arrangement of Azo-PMA0 (amorphous phase) can be completely controlled and reversibly modulated over multiple cycles by 450 nm circularly polarized light (CPL) driven by the supramolecular interaction between azo groups of polymer chains, with an absorption dissymmetry factor (g) value of 0.0019. The chiroptical properties of Azo-PMA6 (liquid crystal state) can also be reversibly modulated by UV light and thermal annealing treatment during trans-cis isomerization of azo chromophore, with the g-value changes from 0-0.038. The successful construction of reversible chiral induction and modulation based on side chain azobenzene polymers may pave the way for designing photo-switchable functional materials. This article is protected by copyright. All rights reserved.

Photoswitchable block copolymers based on main chain α-bisimines

We introduce linear diblock copolymers (BCPs) consisting of readily accessable and photoswitchable α-bisimine units in the polymer backbone.

Polymers with multiple functions: α,ω-macromolecular photoinitiators/chain transfer agents used in aqueous photoinitiated polymerization-induced self-assembly

A series of α,ω-functionalized polymers with a photoinitiator end group and a RAFT end group were synthesized and employed as macromolecular photoinitiators/chain transfer agents in aqueous photoinitiated polymerization-induced self-assembly.

Polymeric nanostructures based on azobenzene and their biomedical applications: synthesis, self-assembly and stimuli-responsiveness

Amphiphilic polymers can self-assemble to form nanoparticles with different structures under suitable conditions. Polymer nanoparticles functionalized with aromatic azo groups are endowed with photo-responsive properties. In recent years, a variety of photoresponsive polymers and nanoparticles have been developed based on azobenzene, using different molecular design strategies and synthetic routes. This article reviews the progress of this rapidly developing research field, focusing on the structure, synthesis, assembly and response of photo-responsive polymer assemblies. According to the molecular structure, photo-responsive polymers can be divided into linear polymers containing azobenzene in a side chain, linear polymers containing azobenzene in the main chain, linear polymers containing azobenzene in an end group, branched polymers containing azobenzene and supramolecular polymers containing azobenzene. These systems have broad biomedical application prospects in the field of drug delivery and imaging applications.

Amphiphilic Asymmetric Diblock Copolymer with pH-Responsive Fluorescent Properties

Stimuli-responsive polymers with changeable fluorescent properties have numerous applications in sensing, bioimaging, and detection. Here we describe the facile synthesis of a pH-responsive amphiphilic asymmetric diblock copolymer of acrylic acid and butyl acrylate that incorporates a polarity-sensitive fluorophore. The asymmetric structure enhances the stimuli-responsive behavior: as the environmental pH decreases, the fluorescent intensity of the asymmetric diblock copolymer gradually increases, whereas its symmetric block counterpart shows limited and stepwise change. Besides, this remarkable difference was demonstrated to be concentration-independent, as similar emission behavior was found for both polymers at lower concentrations. These results indicate that the fluorescence properties of the copolymer can be adjusted by rationally designing the copolymer structure. This work provides a novel and general strategy for the design and synthesis of polymeric materials with encapsulated structures showing stimuli-responsive fluorescent properties to be applied as fluorescent probes with a smoothly varying response curve rather than the simple on-off switch that is typical of block copolymer systems.

Branched Aggregates with Tunable Morphology via Hierarchical Self-Assembly of Azobenzene-Derived Molecular Double Brushes

Hierarchical self-assembly is one of the most effective approaches to fabricate nature-inspired materials with subtle nanostructures. We report a distinct hierarchical self-assembly process of molecular double brushes (MDBs) with each graft site carrying a poly(azobenzene-acrylate) (PAzo) chain and a poly(ethylene oxide) (PEO) chain. Asymmetric tapered worm (ATW) nanostructures with chain-end reactivity assembling from the azobenzene-derived MDBs serve as primary subunits to prepare branched supermicelles by increasing water content (C_w ) in THF/water. Various natural Antedon-shaped multiarm worm-like aggregates (MWAs) can be created via the particle-particle connection of ATWs. Intriguingly, the azobenzene moieties undergo trans-cis isomerization upon UV irradiation and further promote a morphology evolution of MWAs. Multiscale supermicelles comprised of starfish shapes with differing central body and arm morphologies (e.g., compare to the biological specimens Luidia ciliaris and Crossaster papposus) were prepared by manipulating irradiation time.

Inverse Bicontinuous Structure by Polymerization-Induced Self-Assembly Against Single-Chain Nanoparticles

Polymer particles with inverse bicontinuous structures have attracted considerable attention due to their diverse applications. The conventional generation requires controlling numerous key parameters under strict conditions, such as solvent property, polymer composition, and architecture. In order to improve the preparation efficiency within a broad window, we employed a method by polymerization-induced self-assembly (PISA) against intramolecularly folded single-chain nanoparticles (SCNPs). The SCNPs bear an active site for further polymerization. The SCNPs with smaller sizes facilitate easier controlling of the packing parameter above unity to meet the requirement of the unique structures. The concept is demonstrated by forming the inverse bicontinuous structure through PISA in ethanol against two SCNPs of P4VP(SCNP_x%)₃₅-CTA and P(PEGMA₂₀-co-TMSPMA₄)(SCNP_16.7%)-CTA. The unique structure is easily achieved when growing a relatively shorter polymer chain within a broad window. The work paves the avenue to prepare polymer particles with the unique structure in large scale, and other functional materials are expected by using the functional SCNPs or favorable growth of desired materials within the particles.

Influence of single chain nanoparticle stabilizers on polymerization induced hierarchical self-assembly

Intramolecularly folded single chain nanoparticles (SCNPs) with steric character are used as stabilizers to construct a polymerization-induced self-assembly (PISA) formulation for the first time.

Morphological modulation of azobenzene-containing tubular polymersomes

Several external factors influencing the formation and morphologic transition of tubular vesicles were carefully investigated, including the initial polymer concentration, solvent, temperature, water adding rate, and light irradiation.

Synthesis of azobenzene-containing liquid crystalline block copolymer nanoparticles via polymerization induced hierarchical self-assembly

A facile synthesis of non-spherical photoresponsive azobenzene-containing liquid crystalline nanoparticles via polymerization-induced hierarchical self-assembly (PIHSA).

Synthesis and self-assembly of photo-responsive polypeptoid-based copolymers containing azobenzene side chains

Photo-responsive polypeptoid-based copolymers containing azobenzene side chains have been well synthesized and they could self-assemble into tunable nanostructures with reversible light-switched behaviors.

Supramolecular Chirality in Azobenzene-Containing Polymer System: Traditional Postpolymerization Self-Assembly Versus In Situ Supramolecular Self-Assembly Strategy

Recently, the design of novel supramolecular chiral materials has received a great deal of attention due to rapid developments in the fields of supramolecular chemistry and molecular self-assembly. Supramolecular chirality has been widely introduced to polymers containing photoresponsive azobenzene groups. On the one hand, supramolecular chiral structures of azobenzene-containing polymers (Azo-polymers) can be produced by nonsymmetric arrangement of Azo units through noncovalent interactions. On the other hand, the reversibility of the photoisomerization also allows for the control of the supramolecular organization of the Azo moieties within polymer structures. The construction of supramolecular chirality in Azo-polymeric self-assembled system is highly important for further developments in this field from both academic and practical points of view. The postpolymerization self-assembly strategy is one of the traditional strategies for mainly constructing supramolecular chirality in Azo-polymers. The in situ supramolecular self-assembly mediated by polymerization-induced self-assembly (PISA) is a facile one-pot approach for the construction of well-defined supramolecular chirality during polymerization process. In this review, we focus on a discussion of supramolecular chirality of Azo-polymer systems constructed by traditional postpolymerization self-assembly and PISA-mediated in situ supramolecular self-assembly. Furthermore, we will also summarize the basic concepts, seminal studies, recent trends, and perspectives in the constructions and applications of supramolecular chirality based on Azo-polymers with the hope to advance the development of supramolecular chirality in chemistry.

Metathesis Cyclopolymerization Triggered Self-Assembly of Azobenzene-Containing Nanostructure

Azobenzene (AB) units were successfully introduced into poly(1,6-heptadiyne)s in order to ensure smooth synthesis of double- and single-stranded poly(1,6-heptadiyne)s (P1 and P2) and simultaneously realize the self-assembly by Grubbs-III catalyst-mediated metathesis cyclopolymerization (CP) of AB-functionalized bis(1,6-heptadiyne) and 1,6-heptadiyne monomers (M1 and M2). Monomers and polymers were characterized by 1H NMR, mass spectroscopy, and GPC techniques. The double-stranded poly(1,6-heptadiyne)s exhibited a large scale of ordered ladder nanostructure. This result was attributed to the π-π attractions between end groups along the longitudinal axis of the polymers and van der Waals interactions between the neighboring polymeric backbones. While the Azo chromophore connected in the side chain of P2 induced conformation of micelles nanostructure during the CP process without any post-treatment. Furthermore, the photoisomerization of Azo units had an obviously different regulatory effect on the conjugated degree of the polymer backbone, especially for the single-stranded P2, which was attributed to the structural differences and the interaction between AB chromophores in the polymers.

Stimuli-responsive poly(ionic liquid) nanoparticles for controlled drug delivery

A poly(ionic liquid) (PIL) obtained by polymerizing an ionic liquid (IL) monomer exhibits the characteristics of low cost and good biocompatibility, and it retains the excellent properties of the monomer. However, there is still a need to develop PILs for biomedical applications, which has been paid little attention. Herein, an amphiphilic block polymer containing a PIL block is synthesized, which simultaneously includes a targeted ligand, a photo-responsive block, and a pH-responsive block. The resultant amphiphilic block polymer can self-assemble into drug-loaded nanoparticles with a size of ∼80 nm in aqueous solution, and its drug loading capacity is as high as 70%. Moreover, the drug releasing mechanism of these drug-loaded nanoparticles can be triggered by light and pH stimuli. These novel amphiphilic PIL-based drug-loaded nanoparticles show highly effective antitumor effects, providing a promising approach for the delivery and controlled release of chemotherapy drugs in cancer therapy.

In Situ Controlled Construction of a Hierarchical Supramolecular Chiral Liquid-Crystalline Polymer Assembly

Hierarchical supramolecular chiral liquid-crystalline (LC) polymer assemblies are challenging to construct in situ in a controlled manner. Now, polymerization-induced chiral self-assembly (PICSA) is reported. Hierarchical supramolecular chiral azobenzene-containing block copolymer (Azo-BCP) assemblies were constructed with π-π stacking interactions occurring in the layered structure of Azo smectic phases. The evolution of chirality from terminal alkyl chain to Azo mesogen building blocks and further induction of supramolecular chirality in LC BCP assemblies during PICSA is achieved. Morphologies such as spheres, worms, helical fibers, lamellae, and vesicles were observed. The morphological transition had a crucial effect on the chiral expression of Azo-BCP assemblies. The supramolecular chirality of Azo-BCP assemblies destroyed by 365 nm UV irradiation can be recovered by heating-cooling treatment; this dynamic reversible achiral-chiral switching can be repeated at least five times.

Synthesis of AB n -type colloidal molecules by polymerization-induced particle-assembly (PIPA)

Conventional synthesis of colloidal molecules (CMs) mainly depends on particle-based self-assembly of patchy building blocks. However, direct access to CMs by the self-assembly of isotropic colloidal subunits remains challenging. Here, we report the mass production of AB n -type CMs by polymerization-induced particle-assembly (PIPA), using a linear ABC triblock terpolymer system. Starting from diblock copolymer spheres, the association of spheres takes place in situ during the polymerization of the third block. The third blocks aggregate into attractive domains, which connect spheres into CMs. The stability of CMs is ensured, as long as the conversions are limited to ca. 50%, and the pH is low. The valence of AB n -type CMs (n = 2-6) is determined by the volume ratio of the polymer blocks. By tuning the volume ratio, 78.5% linear AB2-type CMs are yielded. We demonstrate that polymerization-induced particle-assembly is successful for the scalable fabrication of AB n -type CMs (50 g L-1), and can be easily extended to vastly different triblock terpolymers, for a wide range of applications.

One-Pot Synthesis of Cross-linked Block Copolymer Nanowires via Polymerization-Induced Hierarchical Self-Assembly and Photodimerization

Block copolymer (BCP) nanowires are crucially important in diversified fields. However, their applications typically suffer from a tedious fabrication process, heterogeneous morphology, and degradation. Herein, we propose a facile and robust approach to synthesize stilbene-containing BCP nanowires in homogeneous morphology with high stability at high solid content (5%-20% w/w) in one pot. It is realized by the polymerization-induced hierarchical self-assembly and subsequent photodimerization cross-linking under UV irradiation of stilbene mesogens in the core-forming block in the later stage of polymerization. Because of the strong liquid crystalline ordering and photodimerization of stilbene, the cross-linked nanowires can be obtained over a broad BCP composition, which show robust morphological stability when exposed to solvent dissolution tests and water dispersion stability tests. This efficient approach to stabilized nanowires with homogeneous morphology via in situ cross-linking would be useful in various fields, such as nanomedicine and Pickering emulsifiers.

Azoreductase-triggered fluorescent nanoprobe synthesized by RAFT-mediated polymerization-induced self-assembly for drug release

Herein, micelles loaded with doxorubicin (DOX) in situ were synthesized by polymerization-induced self-assembly. Furthermore, the DOX-loaded micelles showed release and fluorescence change, owing to azoreductase-triggered azo bond cleavage.

Synthesis and direct assembly of linear–dendritic copolymers via CuAAC click polymerization-induced self-assembly (CPISA)

A one-pot method was developed for in situ preparation of linear–dendritic copolymer assemblies via click polymerization-induced self-assembly (CPISA).