Conformal PEDOT Coating Enables Ultra-High-Voltage and High-Temperature Operation for Single-Crystal Ni-Rich Cathodes

Interfacial Robustness and Improved Kinetics of Single-Crystal Ni-Rich Co-Free Cathodes Enabled by Surface Crystal-Facet Modulation

The elimination of Co from Ni-rich layered cathodes is critical to reduce the production cost and increase the energy density for sustainable development. Herein, a delicate strategy of crystal-facet modulation is designed and explored, which is achieved by simultaneous Al/W-doping into the precursors, while the surface role of the crystal-facet is intensively revealed. Unlike traditional studies on crystal structure growth along a certain direction, this work modulates the crystal-facet at the nanoscale based on the effect of W-doping dynamic migration with surface energy, successfully constructing the core-shell (003)/(104) facet surface. Compared to the (003) plane, the induced (104) facet at the surface can provide more space for Li+-activity, enabling lower interfacial polarization and higher Li+-transport rate. Additionally, bulk Al-doping is beneficial for enhancing the Li+-diffusion from the exterior surface to the interior lattice. With improved interfacial stability and restrained surface erosion, the product exhibits superior capacity retention and boosted rate performance under the elevated temperature.

Side Reactions/Changes in Lithium-Ion Batteries: Mechanisms and Strategies for Creating Safer and Better Batteries

Lithium-ion batteries (LIBs), in which lithium ions function as charge carriers, are considered the most competitive energy storage devices due to their high energy and power density. However, battery materials, especially with high capacity undergo side reactions and changes that result in capacity decay and safety issues. A deep understanding of the reactions that cause changes in the battery's internal components and the mechanisms of those reactions is needed to build safer and better batteries. This review focuses on the processes of battery failures, with voltage and temperature as the underlying factors. Voltage-induced failures result from anode interfacial reactions, current collector corrosion, cathode interfacial reactions, overcharge, and over-discharge, while temperature-induced failure mechanisms include SEI decomposition, separator damage, and interfacial reactions between electrodes and electrolytes. The review also presents protective strategies for controlling these reactions. As a result, the reader is offered a comprehensive overview of the safety features and failure mechanisms of various LIB components.

High-entropy doping promising ultrahigh-Ni Co-free single-crystalline cathode toward commercializable high-energy lithium-ion batteries

The development of advanced layered Ni-rich cathodes is essential for high-energy lithium-ion batteries (LIBs). However, the prevalent Ni-rich cathodes are still plagued by inherent issues of chemomechanical and thermal instabilities and limited cycle life. For this, here, we introduce an efficient approach combining single-crystalline (SC) design with in situ high-entropy (HE) doping to engineer an ultrahigh-Ni cobalt-free layered cathode of LiNi0.88Mn0.03Mg0.02Fe0.02Ti0.02Mo0.02Nb0.01O2 (denoted as HE-SC-N88). Thanks to the SC- and HE-doping merits, HE-SC-N88 is featured with a grain-boundary-free and stabilized structure with minimal lattice strain, preventing mechanical degradation, reducing surface parasitic reactions, and mitigating oxygen loss. Accordingly, our HE-SC-N88 cathode demonstrates exceptional electrochemical properties particularly with prolonged cycling stability under strenuous conditions in both half and full cells, and the delayed O loss-induced phase transitions upon heating. More meaningfully, our design of HE doping in redefining the ultrahigh-Ni Co-free SC cathodes will make a tremendous progress toward industrial application of next-generation LIBs.

In situ and Real-time Monitoring the Chemical and Thermal Evolution of Lithium-ion Batteries with Single-crystalline Ni-rich Layered Oxide Cathode

High-capacity Ni-rich layered oxides are promising cathode materials for fabrication of lithium-ion batteries (LIBs) with high energy density. However, thermal runaway of LIBs with these cathodes leads to great safety concerns. In this study, single crystalline LiNi0.9Co0.05Mn0.05O2 (NCM-SC) has been prepared and a flexible optical fiber was buried inside the pouch-type LIBs with NCM-SC cathode to in situ study its real-time temperature evolution during charge/discharge process. NCM-SC exhibits an enhanced Li+ ions transportation efficiency and electrode reaction kinetics, which can effectively reduce the generation of polarization heat and mitigate the internal temperature rise of the pouch-type battery. Meanwhile, solid-electrolyte interface (SEI) film decomposition and gas accumulation are effectively alleviated, due to the enhanced thermal stability of SEI film formed on NCM-SC. Moreover, the single crystal architecture can effectively retard layered to spinal and rock-salt phase transition, mitigate the crack formation and structural collapse. Consequently, NCM-SC exhibits an excellent electrochemical performance and enhanced thermal stability.

Towards Efficient Polymeric Binders for Transition Metal Oxides-based Li-ion Battery Cathodes

Transition metal oxide cathodes (TMOCs) such as LiNi0.8Mn0.1Co0.1O2 and LiMn1.5Ni0.5O4 have been widely employed in Li-ion batteries (LIBs) owing to superior operating voltages, high reversible capacities and relatively low cost. Nevertheless, despite significant advancements in practical application, TMOC-based LIBs face great challenges such as transition metal dissolution and volume expansion during cycling, which jeopardizes the future advance of high-voltage TMOCs. As a critical component of cathode, polymeric binder acts as a crucial part in maintaining the mechanical and ion/electron conductive integrity between active particles, carbon additives, and the aluminum collector, hence minimizing cathode pulverization during battery cycling. Moreover, Polymeric binder with specialized functions is thought to offer a new solution to enhancing the electrochemical stability of the TMOCs. Therefore, this review aims at providing a comprehensive summary of the ideal requirements, design strategies and recent progress of polymeric binders for TMOCs. Future design perspectives and promising research technologies for advanced binders for high-voltage TMOCs are introduced.

A PEDOT enhanced covalent organic framework (COF) fluorescent probe for in vivo detection and imaging of Fe3

Simple and accurate in vivo monitoring of Fe3+ is essential for gaining a better understanding of its role in physiological and pathological processes. A novel fluorescent probe was synthesized via in situ solid-state polymerization of 3,4-ethylenedioxythiophene (PEDOT) in the pore channels of a covalent organic framework (COF). The PEDOT@COF fluorescent probe exhibited an absolute quantum yield (QY) 3 times higher than COF. In the presence of Fe3+ the PEDOT@COF 475 nm fluorescence emission, 365 nm excitation, is quenched within 180 s. Fluorescence quenching is linear with Fe3+ in the concentration range of 0-960 μM, with a detection limit of 0.82 μM. The fluorescence quenching mechanism was attributed to inner filter effect (IEF), photoinduced electron transfer (PET) and static quenching (SQE) between PEDOT@COF and Fe3+. A paper strip-based detector was designed to facilitate practical applicability, and the PEDOT@COF probe successfully applied to fluorescence imaging of Fe3+ levels in vivo. This work details a tool of great promise for enabling detailed investigations into the role of Fe3+ in physiological and pathological diseases.

Enhanced mechanical strength of a highly de-lithiated single-crystal Ni-rich cathode to suppress irreversible planar gliding

The mechanical properties of de-lithiated single-crystal Ni-rich cathodes are causing extensive concern. Here, we first show that the compression hardness of single crystal Ni-rich cathode particles decreases significantly at highly de-lithiated states by micro-compression testing. Thus, phase-boundary hardening was introduced to inhibit the planar gliding, resulting in excellent electrochemical performance.

Effects of film thickness on electrochemical properties of nanoscale polyethylenedioxythiophene (PEDOT) thin films grown by oxidative molecular layer deposition (oMLD)

Poly(3,4-ethylene dioxythiophene) (PEDOT) has a high theoretical charge storage capacity, making it of interest for electrochemical applications including energy storage and water desalination. Nanoscale thin films of PEDOT are particularly attractive for these applications to enable faster charging. Recent work has demonstrated that nanoscale thin films of PEDOT can be formed using sequential gas-phase exposures via oxidative molecular layer deposition, or oMLD, which provides advantages in conformality and uniformity on high aspect ratio substrates over other deposition techniques. But to date, the electrochemical properties of these oMLD PEDOT thin films have not been well-characterized. In this work, we examine the electrochemical properties of 5-100 nm thick PEDOT films formed using 20-175 oMLD deposition cycles. We find that film thickness of oMLD PEDOT films affects the orientation of ordered domains leading to a substantial change in charge storage capacity. Interestingly, we observe a minimum in charge storage capacity for an oMLD PEDOT film thickness of ∼30 nm (60 oMLD cycles at 150 °C), coinciding with the highest degree of face-on oriented PEDOT domains as measured using grazing incidence wide angle X-ray scattering (GIWAXS). Thinner and thicker oMLD PEDOT films exhibit higher fractions of oblique (off-angle) orientations and corresponding increases in charge capacity of up to 120 mA h g^-1. Electrochemical measurements suggest that higher charge capacity in films with mixed domain orientation arise from the facile transport of ions from the liquid electrolyte into the PEDOT layer. Greater exposure of the electrolyte to PEDOT domain edges is posited to facilitate faster ion transport in these mixed domain films. These insights will inform future design of PEDOT coated high-aspect ratio structures for electrochemical energy storage and water treatment.

Construction of Planar Gliding Restriction Buffer and Kinetic Self-Accelerator Stabilizing Single-Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode

The single-crystalline Ni-rich cathode has aroused much attention for extenuating the cycling and safety crises in comparison to the polycrystalline cathode. However, planar gliding and kinetic hindrance hinder its chemo-mechanical properties with cycling, which induce delamination cracking and damage the mechanical integrity in single crystals. Herein, a robust Li_2.64(Sc_0.9Ti_0.1)₂(PO₄)₃ (LSTP) ion/electron conductive network was constructed to decorate single-crystal LiNi_0.9Co_0.05Mn_0.05O₂ (SC90) particles. Via physicochemical characterizations and theoretical calculations, this LSTP coating that evenly grows on the SC90 particle with good lattice matching and strong bonding effectively restricts the anisotropic lattice collapse along the c-axis and the cation mixing activity of SC90, thus suppressing planar gliding and delamination cracking during repeated high-voltage lithiation/delithiation processes. Moreover, such a 3D LSTP network can also facilitate the lithium-ion transport and prevent the electrolyte's corrosion, lightening the kinetic hindrance and triggering the surface phase transformation. Combined with the Li metal anode, the LSTP-modified SC90 cell exhibits a desirable capacity retention of 90.5% at 5 C after 300 cycles and stabilizes the operation at 4.3/4.5 V. Our results provide surface modification engineering to mitigate planar gliding and kinetic hindrance of the single-crystalline ultra-high Ni-rich cathode, which inspires peers to design other layered cathode materials.