Incorporating Bacteria as a Living Component in Supramolecular Self-Assembled Monolayers through Dynamic Nanoscale Interactions

Insights into β-amyloid transition prevention by cucurbit[7]uril from molecular modeling

In this study, comparable molecular dynamic (MD) simulations of 1.2 microseconds were performed to clarify the prevention of the β-amyloid peptide (Aβ_1-42) aggregation by cucurbit[7]uril (CB[7]). The accumulation of this peptide in the brain is one of the most harmful in Alzheimer's disease. The inhibition mechanism of Aβ_1-42 aggregation by different molecules is attributed to preventing of Aβ_1-42 conformational transition from α-helix to the β-sheet structure. However, our structural analysis shows that the pure water and aqueous solution of the CB[7] denature the native Aβ_1-42 α-helix structure forming different compactness and unfolded conformations, not in β-sheet form. On the other hand, in the three CB[7]@Aβ_1-42 complexes, it was observed the encapsulation of N-terminal (Asp1), Lys16, and Val36 by CB[7] along the MD trajectory, and not with aromatic residues as suggested by the literature. Only in one CB[7]@Aβ_1-42 complex was observed stable Asp23-Lys28 salt bridge with an average distance of 0.36 nm. All CB[7]@Aβ_1-42 complexes are very stable with binding free energy lowest than ∼-50 kcal/mol between the CB[7] and Aβ_1-42 monomer from MM/PBSA calculation. Therefore, herein we show that the mechanism of the prevention of elongation protofibril by CB[7] is due to the disruption of the Asp23-Lys28 salt bridge and steric effects of CB[7]@Aβ_1-42 complex with the fibril lattice, and not due to the transition from α-helix to β-sheet following the dock-lock mechanism.Communicated by Ramaswamy H. Sarma.

Reversible Control of DNA Binding with Cucurbit[8]uril-Induced Supramolecular 4,4'-Bipyridinium-Peptide Dimers

Many cellular processes in living organisms are regulated by complex regulatory networks, built from noncovalent interactions between relatively few proteins that perform their functions by switching between homo- and heterooligomeric assemblies or mono- and bivalent states. Herein, we demonstrate that the conjugation of a 4,4'-bipyridinium scaffold to the basic region of the GCN4 bZip transcription factor can be exploited to control the dimerization of the conjugate by formation of a supramolecular complex with cucurbit[8]uril. Importantly, this supramolecular complex is able to specifically recognize its target dsDNA, and this binding can be reversibly switched by the application of external stimuli.

Blue-Light-Switchable Bacterial Cell-Cell Adhesions Enable the Control of Multicellular Bacterial Communities

Although the fundamental importance and biotechnological potential of multibacterial communities, also called biofilms, are well-known, our ability to control them is limited. We present a new way of dynamically controlling bacteria-bacteria adhesions by using blue light and how these photoswitchable adhesions can be used to regulate multicellularity and associated bacterial behavior. To achieve this, the photoswitchable proteins nMagHigh and pMagHigh were expressed on bacterial surfaces as adhesins to allow multicellular clusters to assemble under blue light and reversibly disassemble in the dark. Regulation of the bacterial cell-cell adhesions with visible light provides unique advantages including high spatiotemporal control, tunability, and noninvasive remote regulation. Moreover, these photoswitchable adhesions make it possible to regulate collective bacterial functions including aggregation, quorum sensing, biofilm formation, and metabolic cross-feeding between auxotrophic bacteria with light. Overall, the photoregulation of bacteria-bacteria adhesions provides a new way of studying bacterial cell biology and will enable the design of biofilms for biotechnological applications.

Host-Enhanced Phenyl-Perfluorophenyl Polar-π Interactions

Phenyl-perfluorophenyl polar-π interactions have been revisited for the design and fabrication of functional supramolecular systems. The relatively weak associative interactions (ΔG ≈ -1.0 kcal/mol) have limited their use in aqueous self-assembly to date. Herein, we propose a strategy to strengthen phenyl-perfluorophenyl polar-π interactions by encapsulation within a synthetic host, thus increasing the binding affinity to ΔG= -15.5 kcal/mol upon formation of heteroternary complexes through social self-sorting. These heteroternary complexes were used as dynamic, yet strong, cross-linkers in the fabrication of supramolecular gels, which exhibited excellent viscoelasticity, stretchability, self-recovery, self-healing, and energy dissipation. This work unveils a general approach to exploit host-enhanced polar-π interactions in the design of robust aqueous supramolecular systems.

Red/Far-Red Light Switchable Cargo Attachment and Release in Bacteria-Driven Microswimmers

In bacteria-driven microswimmers, i.e., bacteriabots, artificial cargos are attached to flagellated chemotactic bacteria for active delivery with potential applications in biomedical technology. Controlling when and where bacteria bind and release their cargo is a critical step for bacteriabot fabrication and efficient cargo delivery/deposition at the target site. Toward this goal, photoregulating the cargo integration and release in bacteriabots using red and far-red light, which are noninvasive stimuli with good tissue penetration and provide high spatiotemporal control, is proposed. In the bacteriabot design, the surfaces of E. coli and microsized model cargo particles with the proteins PhyB and PIF6, which bind to each other under red light and dissociate from each other under far-red light are functionalized. Consequently, the engineered bacteria adhere and transport the model cargo under red light and release it on-demand upon far-red light illumination due to the photoswitchable PhyB-PIF6 protein interaction. Overall, the proof-of-concept for red/far-red light switchable bacteriabots, which opens new possibilities in the photoregulation in biohybrid systems for bioengineering, targeted drug delivery, and lab-on-a-chip devices, is demonstrated.

Dynamic host-guest interaction enables autonomous single molecule blinking and super-resolution imaging

Synthetic host-guest complexes are inherently dynamic as they employ weak and reversible noncovalent interactions for their recognition processes. We strategically exploited dynamic supramolecular recognition between fluorescently labeled guest molecules to complementary cucurbit[7]uril hosts to obtain stochastic switching between fluorescence ON- and OFF-states, enabling PAINT-based nanoscopic imaging in cells and tissues.

On-Flow Immobilization of Polystyrene Microspheres on β-Cyclodextrin-Patterned Silica Surfaces through Supramolecular Host-Guest Interactions

Species-specific isolation of microsized entities such as microplastics and resistant bacteria from waste streams is becoming a growing environmental challenge. By studying the on-flow immobilization of micron-sized polystyrene particles onto functionalized silica surfaces, we ascertain if supramolecular host-guest chemistry in aqueous solutions can provide an alternative technology for water purification. Polystyrene particles were modified with different degrees of adamantane (guest) molecules, and silica surfaces were patterned with β-cyclodextrin (β-CD, host) through microcontact printing (μCP). The latter was exposed to solutions of these particles flowing at different speeds, allowing us to study the effect of flow rate and multivalency on particle binding to the surface. The obtained binding profile was correlated with Comsol simulations. We also observed that particle binding is directly aligned with particle's ability to form host-guest interactions with the β-CD-patterned surface, as particle binding to the functionalized glass surface increased with higher adamantane load on the polystyrene particle surface. Because of the noncovalent character of these interactions, immobilization is reversible and modified β-CD surfaces can be recycled, which provides a positive outlook for their incorporation in water purification systems.

Dynamic Adaptive Two-Dimensional Supramolecular Assemblies for On-Demand Filtration

The construction of synthetic two-dimensional (2D) materials designates a pathway to the versatile chemical functionality by spatial control. However, current 2D materials with intelligence of stimuli-responsibility and adaptiveness have been unfledged. The approach reported here uses a supramolecular strategy to achieve the dynamic non-covalent self-assembly of a rationally designed small molecule monomer, producing large-area, ultra-thin, porous 2D supramolecular assemblies, which are solution-processable in aqueous solution. Importantly, the 2D supramolecular assemblies exhibit distinct adaptive capability to automatically regulate their network density and pore diameters in response to environmental temperature change, which could be developed into an "on-demand" filtration application for nanoparticles. Meanwhile, the 2D supramolecular assemblies can also perform reversible degradation/reformation by photo-irradiation. Our results not only show the simplicity, reliability, and effectiveness of supramolecular strategies in the construction of 2D materials with practical sizes, but also push the dynamic alterability and adaptation features from supramolecular assemblies toward 2D materials.

•

2D supramolecular assemblies combine large area, nano-thickness and water solubility

•

The 2D assemblies can perform reversible expansion/contraction to tune pore sizes

•

The 2D material can be used for on-demand nanoparticles filtration

Implementation of Blue Light Switchable Bacterial Adhesion for Design of Biofilms

Control of bacterial adhesions to a substrate with high precision in space and time is important to form a well-defined biofilm. Here, we present a method to engineer bacteria such that they adhere specifically to substrates under blue light through the photoswitchable proteins nMag and pMag. This provides exquisite spatiotemporal remote control over these interactions. The engineered bacteria express pMag protein on the surface so that they can adhere to substrates with nMag protein immobilization under blue light, and reversibly detach in the dark. This process can be repeatedly turned on and off. In addition, the bacterial adhesion property can be adjusted by expressing different pMag proteins on the bacterial surface and altering light intensity. This protocol provides light switchable, reversible and tunable control of bacteria adhesion with high spatial and temporal resolution, which enables us to pattern bacteria on substrates with great flexibility.

Living Bacteria-Nanoparticle Hybrids Mediated through Surface-Displayed Peptides

In this study, we investigated the preparation of living bacteria-nanoparticle hybrids mediated by surface-displayed peptides. The assembly of metallic nanoparticles on living bacteria has been achieved under mild conditions utilizing metal-peptide interactions, whereas the viability of the bacterial cells was greatly preserved. Escherichia coli was engineered with inducible gene circuits to control the display of peptides with desired sequences. Several designed peptide sequences as well as known gold-binding peptides were expressed on the cell surface using enhanced circularly permuted outer membrane protein X (eCPX) scaffolds. Driven by metal-peptide affinity, "biofriendly" citrate-stabilized gold nanoparticles were self-assembled onto the surface of bacteria with displayed peptides, which required overcoming the repulsive force between negatively charged nanoparticles and negatively charged cells. The bacteria/Au nanoparticle hybrids were highly viable and maintained the ability to grow and divide, which is a crucial step toward the creation of living material systems. Further activity and preservation of the bacterial hybrid assembly was demonstrated. The method described herein enables the conjugation of bacterial surfaces with diverse metal-rich nanoparticles in an inducible, and therefore easily controlled, manner. The expressed peptide sequences can be easily modified to alter the binding affinity and specificity for a wide variety of materials to form on-demand, high-density living biohybrids.

Compartmentalized supramolecular hydrogels based on viral nanocages towards sophisticated cargo administration

Introduction of compartments with defined spaces inside a hydrogel network brings unique features, such as cargo quantification, stabilization and diminishment of burst release, which are all desired for biomedical applications. As a proof of concept, guest-modified cowpea chlorotic mottle virus (CCMV) particles and complementary guest-modified hydroxylpropyl cellulose (HPC) were non-covalently cross-linked through the formation of ternary host-guest complexes with cucurbit[8]uril (CB[8]). Furthermore, CCMV based virus-like particles (VLPs) loaded with tetrasulfonated zinc phthalocyanine (ZnPc) were prepared, with a loading efficiency up to 99%, which are subsequently successfully integrated inside the supramolecular hydrogel network. It was shown that compartments provided by protein cages not only help to quantify the loaded ZnPc cargo, but also improve the water solubility of ZnPc to avoid undesired aggregation. Moreover, the VLPs together with ZnPc cargo can be released in a controlled way without an initial burst release. The photodynamic effect of ZnPc molecules was retained after encapsulation of capsid protein and release from the hydrogel. This line of research suggests a new approach for sophisticated drug administration in supramolecular hydrogels.

Orthogonal supramolecular protein assembly on patterned bifunctional surfaces

Selective dual protein assembly achieved using metal–ion and host–guest interactions with fluorescent proteins, modified with binding tags, by controlling opposing supramolecular interactions.

Blue Light Switchable Bacterial Adhesion as a Key Step toward the Design of Biofilms

The control of where and when bacteria adhere to a substrate is a key step toward controlling the formation and organization in biofilms. This study shows how we engineer bacteria to adhere specifically to substrates with high spatial and temporal control under blue light, but not in the dark, by using photoswitchable interaction between nMag and pMag proteins. For this, we express pMag proteins on the surface of E. coli so that the bacteria can adhere to substrates with immobilized nMag protein under blue light. These adhesions are reversible in the dark and can be repeatedly turned on and off. Further, the number of bacteria that can adhere to the substrate as well as the attachment and detachment dynamics are adjustable by using different point mutants of pMag and altering light intensity. Overall, the blue light switchable bacteria adhesions offer reversible, tunable and bioorthogonal control with exceptional spatial and temporal resolution. This enables us to pattern bacteria on substrates with great flexibility.

Three-Dimensional Organization of Self-Encapsulating Gluconobacter oxydans Bacterial Cells

Self-organized bacteria have been the subject of interest for a number of applications, including the construction of microbial fuel cells. In this paper, we describe the formation of a self-organized, three-dimensional network that is constructed using Gluconobacter oxydans B-1280 cells in a hydrogel consisting of poly(vinyl alcohol) (PVA) with N-vinyl pyrrolidone (VP) as a cross-linker, in which the bacterial cells are organized in a particular side-by-side alignment. We demonstrated that nonmotile G. oxydans cells are able to reorganize themselves, transforming and utilizing PVA-VP polymeric networks through the molecular interactions of bacterial extracellular polysaccharide (EPS) components such as acetan, cellulose, dextran, and levan. Molecular dynamics simulations of the G. oxydans EPS components interacting with the hydrogel polymeric network showed that the solvent-exposed loops of PVA-VP extended and engaged in bacterial self-encapsulation.

Targeting protein-loaded CB[8]-mediated supramolecular nanocarriers to cells

Supramolecular amphiphiles, consisting of ternary complexes of cucurbit[8]uril (CB[8]), an alkylated paraquat derivative and a tetraethylene glycol-functionalized azobenzene, self-assemble into vesicles of about 200 nm in diameter. The outer surface of the vesicles was functionalized with cell-targeting ligands. These vesicles were employed for loading and delivery of proteins into cells. Supramolecular amphiphile-derived vesicles show great promise as nanocarriers of functional molecules to be transferred into cells.

Hierarchical Self-Assembly of Cyclodextrin and Dimethylamino-Substituted Arylene-Ethynylene on N-doped Graphene for Synergistically Enhanced Electrochemical Sensing of Dihydroxybenzene Isomers

An electrochemically active sensing nanomaterial (denoted as CD-MPEA-NG) has been successfully constructed by an hierarchical self-assembly of cyclodextrin (CD) and N,N-dimethyl-4-(phenylethynyl)aniline (MPEA) on N-doped graphene (NG) in a low-temperature hydrothermal process. The unique nanostructure of the high-performance CD-MPEA-NG was confirmed by utilizing Fourier transform infrared spectra, an X-ray diffractometer, and differential pulse voltammetry (DPV), etc. In particular, the method of density functional theory with dispersion energy (DFT-D) of wB97XD/LanL2DZ was employed to optimize and describe the face-to-face packing structure of heterodimers of NG and MPEA. The CD-MPEA-NG sensor exhibits highly sensitive performance toward dihydroxybenzene isomers, without relying on expensive noble metal or a complicated preparation process. The experimental results demonstrate that given the synergistic effect of NG and MPEA as a coupled sensing platform, CD as a supramolecular cavity can significantly enhance the electrochemical response. The detection limits (S/N = 3) for catechol (CT), resorcinol (RS), and hydroquinone (HQ) are 0.008, 0.018, and 0.011 μM by DPV, respectively. Besides, the CD-MPEA-NG sensor shows a superb anti-interference, reproducibility, and stability, and satisfactory recovery aimed at detecting isomers in Nanjing River water. The encouraging performance as well as simplified preparation approach strongly support the CD-MPEA-NG sensor is a fascinating electrode to develop as a seamless and sensitive electroanalytical technique.

Cell Adhesion on RGD-Displaying Knottins with Varying Numbers of Tryptophan Amino Acids to Tune the Affinity for Assembly on Cucurbit[8]uril Surfaces

Cell adhesion is studied on multivalent knottins, displaying RGD ligands with a high affinity for integrin receptors, that are assembled on CB[8]-methylviologen-modified surfaces. The multivalency in the knottins stems from the number of tryptophan amino acid moieties, between 0 and 4, that can form a heteroternary complex with cucurbit[8]uril (CB[8]) and surface-tethered methylviologen (MV2+). The binding affinity of the knottins with CB[8] and MV2+ surfaces was evaluated using surface plasmon resonance spectroscopy. Specific binding occurred, and the affinity increased with the valency of tryptophans on the knottin. Additionally, increased multilayer formation was observed, attributed to homoternary complex formation between tryptophan residues of different knottins and CB[8]. Thus, we were able to control the surface coverage of the knottins by valency and concentration. Cell experiments with mouse myoblast (C2C12) cells on the self-assembled knottin surfaces showed specific integrin recognition by the RGD-displaying knottins. Moreover, cells were observed to elongate more on the supramolecular knottin surfaces with a higher valency, and in addition, more pronounced focal adhesion formation was observed on the higher-valency knottin surfaces. We attribute this effect to the enhanced coverage and the enhanced affinity of the knottins in their interaction with the CB[8] surface. Collectively, these results are promising for the development of biomaterials including knottins via CB[8] ternary complexes for tunable interactions with cells.

A Binary Bivalent Supramolecular Assembly Platform Based on Cucurbit[8]uril and Dimeric Adapter Protein 14-3-3

Interactions between proteins frequently involve recognition sequences based on multivalent binding events. Dimeric 14‐3‐3 adapter proteins are a prominent example and typically bind partner proteins in a phosphorylation‐dependent mono‐ or bivalent manner. Herein we describe the development of a cucurbit[8]uril (Q8)‐based supramolecular system, which in conjunction with the 14‐3‐3 protein dimer acts as a binary and bivalent protein assembly platform. We fused the phenylalanine–glycine–glycine (FGG) tripeptide motif to the N‐terminus of the 14‐3‐3‐binding epitope of the estrogen receptor α (ERα) for selective binding to Q8. Q8‐induced dimerization of the ERα epitope augmented its affinity towards 14‐3‐3 through a binary bivalent binding mode. The crystal structure of the Q8‐induced ternary complex revealed molecular insight into the multiple supramolecular interactions between the protein, the peptide, and Q8.

Cell Adhesion on Dynamic Supramolecular Surfaces Probed by Fluid Force Microscopy-Based Single-Cell Force Spectroscopy

Biomimetic and stimuli-responsive cell-material interfaces are actively being developed to study and control various cell-dynamics phenomena. Since cells naturally reside in the highly dynamic and complex environment of the extracellular matrix, attempts are being made to replicate these conditions in synthetic biomaterials. Supramolecular chemistry, dealing with noncovalent interactions, has recently provided possibilities to incorporate such dynamicity and responsiveness in various types of architectures. Using a cucurbit[8]uril-based host-guest system, we have successfully established a dynamic and electrochemically responsive interface for the display of the integrin-specific ligand, Arg-Gly-Asp (RGD), to promote cell adhesion. Due to the weak nature of the noncovalent forces by which the components at the interface are held together, we expected that cell adhesion would also be weaker in comparison to traditional interfaces where ligands are usually immobilized by covalent linkages. To assess the stability and limitations of our noncovalent interfaces, we performed single-cell force spectroscopy studies using fluid force microscopy. This technique enabled us to measure rupture forces of multiple cells that were allowed to adhere for several hours on individual substrates. We found that the rupture forces of cells adhered to both the noncovalent and covalent interfaces were nearly identical for up to several hours. We have analyzed and elucidated the reasons behind this result as a combination of factors including the weak rupture force between linear Arg-Gly-Asp and integrin, high surface density of the ligand, and increase in effective concentration of the supramolecular components under spread cells. These characteristics enable the construction of highly dynamic biointerfaces without compromising cell-adhesive properties.

Orthogonal Surface Tags for Whole-Cell Biocatalysis

We herein describe the engineering of E. coli strains that display orthogonal tags for immobilization on their surface and overexpress a functional heterologous "protein content" in their cytosol at the same time. Using the outer membrane protein Lpp-ompA, cell-surface display of the streptavidin-binding peptide, the SpyTag/SpyCatcher system, or a HaloTag variant allowed us to generate bacterial strains that can selectively bind to solid substrates, as demonstrated with magnetic microbeads. The simultaneous cytosolic expression of functional content was demonstrated for fluorescent proteins or stereoselective ketoreductase enzymes. The latter strains gave high selectivities for specific immobilization onto complementary surfaces and also in the whole-cell stereospecific transformation of a prochiral C_S -symmetric nitrodiketone.

Decreasing amyloid toxicity through an increased rate of aggregation

Amyloid β is one of the peptides involved in the onset of Alzheimer's disease, yet the structure of the toxic species and its underlying mechanism remain elusive on account of the dynamic nature of the Aβ oligomerisation process. While it has been reported that incubation of Amyloid β (1-42) sequences (Aβ42) lead to formation of aggregates that vary in morphology and toxicity, we demonstrate that addition of a discrete macrocyclic host molecule, cucurbit[8]uril (CB[8]), substantially reduces toxicity in the neuronal cell line SH-SY5Y. The macrocycle preferentially targets Phe residues in Aβ42 complexing them in a 2 : 1 fashion in neighboring peptide strands. A small but significant structural 'switch' occurs, which induces an increased aggregation rate, suggesting a different cell-uptake mechanism for Aβ42 in the presence of CB[8]. Dramatically increasing the rate of Aβ42 aggregation with CB[8] bypasses the toxic, oligomeric state offering an alternative approach to counter Alzheimer's disease.

Exploring cucurbit[6]uril–peptide interactions in the solid state: crystal structure of cucurbit[6]uril complexes with glycyl-containing dipeptides

Macrocyclic host cucurbit[6]uril forms supramolecular complexes with dipeptides sequenced as Gly-X, where X is either an aromatic amino acid residue Phe, Tyr, and Trp or Gly in the solid state.

Photoresponsive, reversible immobilization of virus particles on supramolecular platforms

Covalently attached azobenzene moieties to cowpea chlorotic mottle virus (CCMV) allow for photoresponsive immobilization on cucurbit[8]uril bearing surfaces.

Modulating the Nucleated Self-Assembly of Tri-β(3) -Peptides Using Cucurbit[n]urils

The modulation of the hierarchical nucleated self-assembly of tri-β(3) -peptides has been studied. β(3) -Tyrosine provided a handle to control the assembly process through host-guest interactions with CB[7] and CB[8]. By varying the cavity size from CB[7] to CB[8] distinct phases of assembling tri-β(3) -peptides were arrested. Given the limited size of the CB[7] cavity, only one aromatic β(3) -tyrosine can be simultaneously hosted and, hence, CB[7] was primarily acting as an inhibitor of self-assembly. In strong contrast, the larger CB[8] can form a ternary complex with two aromatic amino acids and hence CB[8] was acting primarily as cross-linker of multiple fibers and promoting the formation of larger aggregates. General insights on modulating supramolecular assembly can lead to new ways to introduce functionality in supramolecular polymers.

Supramolecular Control over Split-Luciferase Complementation

Supramolecular split-enzyme complementation restores enzymatic activity and allows for on-off switching. Split-luciferase fragment pairs were provided with an N-terminal FGG sequence and screened for complementation through host-guest binding to cucurbit[8]uril (Q8). Split-luciferase heterocomplex formation was induced in a Q8 concentration dependent manner, resulting in a 20-fold upregulation of luciferase activity. Supramolecular split-luciferase complementation was fully reversible, as revealed by using two types of Q8 inhibitors. Competition studies with the weak-binding FGG peptide revealed a 300-fold enhanced stability for the formation of the ternary heterocomplex compared to binding of two of the same fragments to Q8. Stochiometric binding by the potent inhibitor memantine could be used for repeated cycling of luciferase activation and deactivation in conjunction with Q8, providing a versatile module for in vitro supramolecular signaling networks.

Functionalizing the glycocalyx of living cells with supramolecular guest ligands for cucurbit[8]uril-mediated assembly

Multiple naphthol ligands were installed on the glycocalyx of white blood cells via metabolic labeling and subsequent strain promoted azide-alkyne cycloaddition. Only when cucurbit[8]uril was present to drive the formation of ternary complexes, cells specifically assembled on a methylviologen functionalized supported lipid bilayer through multivalent interactions.

Photoresponsive Cucurbit[8]uril-Mediated Adhesion of Bacteria on Supported Lipid Bilayers

In this work, the development of a photoresponsive platform for the presentation of bioactive ligands to study receptor-ligand interactions has been described. For this purpose, supramolecular host-guest chemistry and supported lipid bilayers (SLBs) have been combined in a microfluidic device. Quartz crystal microbalance with dissipation monitoring (QCM-D) studies on methyl viologen (MV)-functionalized oligo ethylene glycol-based self-assembled monolayers, gel and liquid-state SLBs have been compared for their nonfouling properties in the case of ConA and bacteria. In combination with bacterial adhesion test, negligible nonspecific bacterial adhesion is observed only in the case of methyl-viologen-modified liquid-state SLBs. Therefore, liquid-state SLBs have been identified as most suitable for studying specific cell interactions when MV is incorporated as a guest on the surface. The photoswitchable supramolecular ternary complex is formed by assembling cucurbit[8]uril (CB[8]) and an azobenzene-mannose conjugate (Azo-Man) onto MV-functionalized liquid-state SLBs and the assembly process has been characterized using QCM-D and fluorescence techniques. Mannose has been found to enable binding of E. coli via cell-surface receptors on the nonfouling supramolecular SLBs. Optical switching of the azobenzene moiety allows us to "erase" the bioactive surface after bacterial binding, providing the potential to develop reusable sensors. Localized photorelease of bacterial cells has also been shown indicating the possibility of optically guiding cellular growth, migration, and intercellular interactions.

Supramolecular Surface Immobilization of Knottin Derivatives for Dynamic Display of High Affinity Binders

Knottins are known as a robust and versatile class of miniprotein scaffolds for the presentation of high-affinity binding peptides; however, to date their application in biomaterials, biological coatings, and surface applications have not been explored. We have developed a strategy to recombinantly synthesize a β-trypsin inhibitory knottin with supramolecular guest tags that enable it to adhere to self-assembled monolayers of the supramolecular host cucurbit[8]uril (CB[8]). We have described a strategy to easily express knottins in E. coli by conjugating them to a fluorescent protein after which they are cleaved and purified. Knottin constructs that varied in the number and position of the supramolecular tag at either the N- or C-termini or at both ends have been verified for their trypsin inhibitory function and CB[8]-binding properties in solution and on surfaces. All of the knottin constructs showed strong inhibition of trypsin with inhibition constants between 10 and 30 nM. Using microscale thermophoresis, we determined that the supramolecular guest tags on the knottins bind CB[8] with a Kd of ∼6 μM in solution. At the surface, strong divalent binding has been determined with a Kd of 0.75 μM in the case of the knottin with two supramolecular guest tags, whereas only weak monovalent binding occurred when only one guest tag was present. We also show successful supramolecular surface immobilization of the knottin using CB[8] and prove that they can be used to immobilize β-trypsin at the surface.