Radially Phase Segregated PtCu@PtCuNi Dendrite@Frame Nanocatalyst for the Oxygen Reduction Reaction

Twin defect-rich Pt ultrathin nanowire nanozymes alleviate inflammatory skin diseases by scavenging reactive oxygen species

Nanozymes with superior antioxidant properties offer new hope for treating oxidative stress-related inflammatory skin diseases. However, lacking sufficient catalytic activity or having complex material designs limit the application of current metallic nanozymes in inflammatory skin diseases. Here, we report a simple and effective twin-defect platinum nanowires (Pt NWs) enzyme with multiple mimetic enzymes and broad-spectrum ROS scavenging capability for the treatment of inflammatory skin diseases in mice (including psoriasis and rosacea). Pt NWs with simultaneous superoxide dismutase, glutathione peroxidase and catalase mimetic enzyme properties exhibit cytoprotective effects against ROS-mediated damage at extremely low doses and significantly improve treatment outcomes in psoriasis- and rosacea-like mice. Meanwhile, these ultrasmall sizes of Pt NWs allow the nanomaterials to effectively penetrate the skin and do not produce significant biotoxicity. Therefore, Pt NWs have potential applications in treating diseases related to oxidative stress or inflammation.

High-entropy Pt18Ni26Fe15Co14Cu27 nanocrystalline crystals in situ grown on reduced graphene oxide with excellent electromagnetic absorption properties

The high entropy alloy is a powerful material due to its high hardness, strength, magnetic performance, corrosion resistance, and temperature stability. Moreover, when combined with reduced graphene oxide (rGO), it formed a novel material for electromagnetic (EM) absorption. In this work, monodisperse high entropy alloy nanocrystals combined with rGO to create a new type of high entropy alloy/rGO EM absorption material. A colloidal synthesis strategy was used to prepare high entropy Pt₁₈Ni₂₆Fe₁₅Co₁₄Cu₂₇ nanocrystals with a small size of around 3.3 nm. These nanocrystals then in situ grew uniformly on the surface of rGO to form Pt₁₈Ni₂₆Fe₁₅Co₁₄Cu₂₇/rGO nanocomposite, which were then characterized and tested for EM absorption performance. Compared to the pure high entropy Pt₁₈Ni₂₆Fe₁₅Co₁₄Cu₂₇ nanocrystals, the composite exhibited an improved EM absorption performance with a minimum reflection loss of -41.8 dB at 4.9 GHz and efficient EM wave absorption up to a bandwidth of 2.5 GHz in the 9.4-11.9 GHz band. This novel high entropy alloy/rGO composite has great potential to be used as an excellent material for EM wave absorption.

Ion-Assisted Preparation of Bimetallic Porous Nanodendrites for Active and Stable Water Electrolysis

Delicate electrochemical active surface area (ECSA) engineering over the exposed catalytic interface and surface topology of platinum-based nanomaterial represents an effective pathway to boost its catalytic properties toward the clean energy conversion system. Here, for the first time, the facial and universal production of dendritic Pt-based nanoalloys (Pt-Ni, Co, Fe) with highly porous feature via a novel Zn²⁺ -mediated solution approach is demonstrated. In the presence of Zn²⁺ during synthesis, the competition of different galvanic replacement reactions and consequently generated "branch-to-branch" growth mode are believed to play key roles for the in situ fabrication of such unique nanostructure. Due to the fully exposed active sites and ligand effect-induced electronic optimization, electrochemical hydrogen evolution in alkaline media on these catalysts exhibit dramatic activity enhancement, delivering a current density of 30.6 mA cm^-2 at a 70 mV overpotential for the Pt₃ Ni nanodendrites and over 7.4 times higher than that of commercial Pt/C. This work highlights a general and powerful ion-assisted strategy for exploiting dendritic Pt-based nanostructures with efficient activities for water electrolysis.

Structurally-supported PtCuCo nanoframes as efficient bifunctional catalysts for oxygen reduction and methanol oxidation reactions

Developing highly durable and active catalysts with the morphology of structurally robust nanoframes toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) in acidic environment is crucial but still a great challenge to completely achieve in a single material. Herein, PtCuCo nanoframes (PtCuCo NFs) with internal support structures as enhanced bifunctional electrocatalysts were prepared by a facile one-pot approach. PtCuCo NFs exhibited remarkable activity and durability for ORR and MOR owing to the ternary compositions and the structure-fortifying frame structures. Impressively, the specific/mass activity of PtCuCo NFs were 12.8/7.5 times as large as that of commercial Pt/C for ORR in perchloric acid solution. For MOR in sulfuric acid solution, the mass/specific activity of PtCuCo NFs was 1.66 A mg_Pt^-1/4.24 mA cm^-2, which was 5.4/9.4 times as large as that of Pt/C. This work may provide a promising nanoframe material to develop dual catalysts for fuel cells.

Stability challenges of carbon-supported Pt-nanoalloys as fuel cell oxygen reduction reaction electrocatalysts

Carbon-supported Pt-based nanoalloys (CSPtNs) as the oxygen reduction reaction (ORR) electrocatalysts are considered state-of-the-art electrocatalysts for use in proton exchange membrane fuel cells (PEMFCs). Although their ORR activity performance is already adequate to allow lowering of the Pt loading and thus commercialisation of the fuel cell technology, their stability remains an open challenge. In this Feature Article, the recent achievements and acquired knowledge on the degradation behaviour of these electrocatalysts are overviewed and discussed.

Heterostructured BiVO4/CoPi nanoarrays as high-efficiency photoanode and AuPt nanodendrites as nanozyme for sensitive sensing of miRNA 141

MicroRNA (miRNA) is a new class of tumor biomarkers in human body for early diagnosis and therapy of cancers, whose detection has scientific significance and potential applications. Herein, a sensitive heterostructured BiVO₄/CoPi photoelectrochemical (PEC) biosensor was established for sensing miRNA 141 with assistance of home-synthesized AuPt nanodendrites (NDs) as nanozyme. Specifically, the BiVO₄/CoPi heterostructures displayed rough worm-like internetworks, as characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). In parallel, the PEC and UV-vis diffuse reflectance spectroscopy tests confirmed their excellent optical property, combined by discussing the interfacial electron transfer mechanism. Additionally, the AuPt NDs displayed superior peroxidase-like property in the presence of H₂O₂ as identified by benchmarked tetramethylbenzidine (TMB) oxidation, coupled by showing remarkable catalysis for 3-amino-9-ethylcarbazole (AEC) oxidation to form biocatalytic precipitation (BCP). Integrated by a cyclic enzyme strategy, the developed PEC biosensor exhibited a wider linear range of 5 fM ∼1 pM and a lower limit of detection (LOD) as low as 0.17 fM (S/N = 3). This work provides some valuable insights for sensitive analysis of tumor-associated miRNA in clinic.

Highly Efficient Oxygen Reduction Reaction Electro-catalyzed by Ultra-small Pt@Mn Core-shell Nanoparticles

Electro-catalyzed oxygen reduction reaction (ORR), as the positive electrode reaction, is significant to the performance of fuel cells and metal-air batteries. Toward ORR, ultra-small Pt@Mn core-shell nanoparticles catalysts supported on Ketjen black are synthesized by a simple one-pot hydrothermal method. TEM results show that the Pt@Mn/C nanoparticles with an average size of 3~4 nm are uniformly distributed on the carbon surface. ORR performance of the electrocatalysts show that Pt@Mn/C exhibits better oxygen reduction activity than Pt/C (20 wt%) in a KOH solution. Methanol tolerance ability as well as the durability of the Pt@Mn/C is also superior to the performance of Pt/C, suggesting an enhanced ORR activity upon the introduction of Mn.

Chemical Fields: Directing Atom Migration in the Multiphasic Nanocrystal

ConspectusAtoms in a bulk solid phase are usually trapped to fixed positions and can change their position only under certain conditions (e.g., at a melting point) due to the high energy barrier of migration between positions within the crystal lattice. Contrary to the atoms in the bulk solid phase, however, atoms in nanoparticles can migrate and change their local positions rather easily, enabled by the high surface energies. The energy states of surface atoms of nanoparticles can be altered by surface-binding moieties, which in turn influence the intrananoparticle migration of atoms at the subsurface of nanoparticles. In 2008, this possibility of intrananoparticle migration was demonstrated with RhPd alloy nanoparticles under the different gas environments of reductive CO or oxidative NO. We envisaged that the explosive expansion of well-defined, multiphasic nanoparticle libraries might be realized by specifically dictating the atom migration direction, by modulating the energy state of specific atoms in the multiphasic nanocrystals. The nanoparticle surface energy is a function of a myriad of factors, namely, surface binding moiety, structural features affecting coordination number of atoms such as nanoparticle geometry, steps, and kinks, and the existence of heterointerface with lattice mismatch. Therefore, all these factors affecting atom energy state in the nanoparticle, categorically termed as "chemical field" (CF), can serve as the driving force for purposeful directional movement of atoms within nanoparticles and subsequent reaction. Geometrically well-defined multiphasic nanocrystals present great promises toward various applications with special emphasis on catalysis and thus are worthy synthetic targets. In recent years, we have demonstrated that manipulation of CFs is an effective synthetic strategy for a variety of geometrically well-defined multiphasic nanocrystals. Herein, we classified multiphasic nanocrystals into metallic alloy systems and ionic systems (metal compounds) because the modes of CF are rather different between these two systems. The migration-directing CFs for neutral metallic atoms are mostly based on the local distribution of elements, degree of alloying, or highly energetic structural features. On the other hand, for the ionic system, structural parameters originating from the discrepancy between cations and anions should be more considered; ionic radii, phase stability, lattice strain, anionic frameworks, cation vacancies, etc. can react as CFs affecting atom migration behavior in the multiphasic ionic nanocrystals. We expect that the limits and potentials of CF-based synthesis of multiphasic nanocrystals described in this work will open a wide avenue to diverse material compositions and geometries, which have been difficult or impossible to approach via conventional nanoparticle synthesis schemes.

Multi-principal elemental intermetallic nanoparticles synthesized via a disorder-to-order transition

Nanoscale multi-principal element intermetallics (MPEIs) may provide a broad and tunable compositional space of active, high-surface area materials with potential applications such as catalysis and magnetics. However, MPEI nanoparticles are challenging to fabricate because of the tendency of the particles to grow/agglomerate or phase-separated during annealing. Here, we demonstrate a disorder-to-order phase transition approach that enables the synthesis of ultrasmall (4 to 5 nm) and stable MPEI nanoparticles (up to eight elements). We apply just 5 min of Joule heating to promote the phase transition of the nanoparticles into L1₀ intermetallic structure, which is then preserved by rapidly cooling. This disorder-to-order transition results in phase-stable nanoscale MPEIs with compositions (e.g., PtPdAuFeCoNiCuSn), which have not been previously attained by traditional synthetic methods. This synthesis strategy offers a new paradigm for developing previously unexplored MPEI nanoparticles by accessing a nanoscale-size regime and novel compositions with potentially broad applications.

Understanding the Crucial Significance of the Temperature and Potential Window on the Stability of Carbon Supported Pt-Alloy Nanoparticles as Oxygen Reduction Reaction Electrocatalysts

The present research provides a study of carbon-supported intermetallic Pt-alloy electrocatalysts and assesses their stability against metal dissolution in relation to the operating temperature and the potential window using two advanced electrochemical methodologies: (i) the in-house designed high-temperature disk electrode (HT-DE) methodology as well as (ii) a modification of the electrochemical flow cell coupled to an inductively coupled plasma mass spectrometer (EFC-ICP-MS) methodology, allowing for highly sensitive time- and potential-resolved measurements of metal dissolution. While the rate of carbon corrosion follows the Arrhenius law and increases exponentially with temperature, the findings of the present study contradict the generally accepted hypothesis that the kinetics of Pt and subsequently the less noble metal dissolution are supposed to be for the most part unaffected by temperature. On the contrary, clear evidence is presented that in addition to the importance of the voltage/potential window, the temperature is one of the most critical parameters governing the stability of Pt and thus, in the case of Pt-alloy electrocatalysts, also the ability of the nanoparticles (NPs) to retain the less noble metal. Lastly, but also very importantly, results indicate that the rate of Pt redeposition significantly increases with temperature, which has been the main reason why mechanistic interpretation of the temperature-dependent kinetics related to the stability of Pt remained highly speculative until now.

Recent progress of electrocatalysts for oxygen reduction in fuel cells

Oxygen reduction reaction (ORR) has gradually been in the limelight in recent years because of its great application potential for fuel cells and rechargeable metal-air batteries. Therefore, significant issues are increasingly focused on developing effective and economical ORR electrocatalysts. This review begins with the reaction mechanisms and theoretical calculations of ORR in acidic and alkaline media. The latest reports and challenges in ORR electrocatalysis are traced. Most importantly, the latest advances in the development of ORR electrocatalysts are presented in detail, including platinum group metal (PGM), transition metal, and carbon-based electrocatalysts with various nanostructures. Furthermore, the development prospects and challenges of ORR electrocatalysts are speculated and discussed. These insights would help to formulate the design guidelines for highly-active ORR electrocatalysts and affect future research to obtain new knowledge for ORR mechanisms.

Pyrolysis of Aesculus chinensis Bunge Seed with Fe2O3/NiO as nanocatalysts for the production of bio-oil material

The rapid thermal cracking technology of biomass can convert biomass into bio-oil and is beneficial for industrial applications. Agricultural and forestry wastes are important parts of China's energy, and their high-grade utilization is useful to solve the problem of energy shortages and environmental pollution. To the best of our knowledge, the impact of nanocatalysts on converting biowastes for bio-oil has not been studied. Consequently, we examined the production of bio-oil by pyrolysis of Aesculus chinensis Bunge Seed (ACBS) using nanocatalysts (Fe₂O₃ and NiO catalysts) for the first time. The pyrolysis products of ACBS include 1-hydroxy-2-propanone (3.97%), acetic acid (5.42%), and furfural (0.66%). These chemical components can be recovered for use as chemical feedstock in the form of bio-oil, thus indicating the potential of ACBS as a feedstock to be converted by pyrolysis to produce value-added bio-oil. The Fe₂O₃ and NiO catalysts enhanced the pyrolysis process, which accelerated the precipitation of gaseous products. The pyrolysis rates of the samples gradually increased at DTG_max, effectively promoting the catalytic cracking of ACBS, which is beneficial to the development and utilization of ACBS to produce high valorization products. Combining ACBS and nanocatalysts can change the development direction of high valorization agricultural and forestry wastes in the future.

Bimetallic Nanocrystals: Structure, Controllable Synthesis and Applications in Catalysis, Energy and Sensing

In recent years, bimetallic nanocrystals have attracted great interest from many researchers. Bimetallic nanocrystals are expected to exhibit improved physical and chemical properties due to the synergistic effect between the two metals, not just a combination of two monometallic properties. More importantly, the properties of bimetallic nanocrystals are significantly affected by their morphology, structure, and atomic arrangement. Reasonable regulation of these parameters of nanocrystals can effectively control their properties and enhance their practicality in a given application. This review summarizes some recent research progress in the controlled synthesis of shape, composition and structure, as well as some important applications of bimetallic nanocrystals. We first give a brief introduction to the development of bimetals, followed by the architectural diversity of bimetallic nanocrystals. The most commonly used and typical synthesis methods are also summarized, and the possible morphologies under different conditions are also discussed. Finally, we discuss the composition-dependent and shape-dependent properties of bimetals in terms of highlighting applications such as catalysis, energy conversion, gas sensing and bio-detection applications.

Platinum-Copper Bimetallic Colloid Nanoparticle Cluster Nanozymes with Multiple Enzyme-like Activities for Scavenging Reactive Oxygen Species

Fabrication of high-performance artificial antioxidant enzyme (AAE) systems based on a single nanozyme possessing multi-enzymatic activities is fascinating but challenging. Here, polyvinylpyrrolidone (PVP)-platinum-copper nanoparticle clusters (PVP-PtCuNCs) are prepared by a facile one-pot chemical coreduction method. PVP-PtCuNCs possess efficient superoxide dismutase (SOD)-like, peroxidase (POD)-like, and catalase (CAT)-like activities, and the multi-enzymatic activities depend on the bimetal component and cluster structure. Compared with individual platinum nanoparticle clusters (PVP-PtNCs), PVP-PtCuNCs can effectively eliminate reactive oxygen species (ROS) including superoxide anions, hydrogen peroxide, and hydroxyl radicals. The doping of copper not only reduces the usage of Pt content but also improves the catalytic efficiency and versatility effectively through the synergistic effect of bimetal components and the nanocluster structure. The results not only demonstrate that a single bimetallic nanozyme has the potential as an efficient AAE system in the biomedical application but also demonstrate that traditional concepts of structure-activity relationships can be used to fabricate nanozymes with the desired multi-enzymatic activities.

Trimetallic synergy in dendritic intermetallic PtSnBi nanoalloys for promoting electrocatalytic alcohol oxidation

Developing effective and robust novel electrocatalysts for direct alcohol fuel cells has been gaining much attention. However, the widely used Pt catalyst suffers from limitations including the sluggish kinetics, severe CO poisoning, and catalyst lost caused by aggregation and Ostwald ripening during alcohol oxidation reaction. Herein, dendritic intermetallic PtSnBi nanoalloys were synthesized via a facile hydrothermal approach with high electrocatalytic performance and enhanced CO resistance for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) owing to the synergism of the chosen three elements and unique three-dimensional morphology. Specifically, the PtSnBi nanoalloys display 4.6 and 6.7 times higher of mass activity (7.02 A mg^-1_Pt) and specific activity (16.65 mA cm^-2) toward MOR than those of commercial Pt/C, respectively. The mass activity of PtSnBi nanoalloys still retains 75.7% of the initial value after 800 cycles of stability test, superior to Pt/C (38.0%). The dual-functional effect of Sn, optimized electronic structure by the ligand effect, and unique atomic arrangement are responsible for the enhanced MOR activity and stability of PtSnBi nanoalloys. Furthermore, the PtSnBi nanoalloys with highlighted anti-CO poisoning capacity also improve the electrocatalytic performance toward EOR, indicating their great promise as broad energy electrocatalysts.

Nickel Structures as a Template Strategy to Create Shaped Iridium Electrocatalysts for Electrochemical Water Splitting

Low-cost, highly active, and highly stable catalysts are desired for the generation of hydrogen and oxygen using water electrolyzers. To enhance the kinetics of the oxygen evolution reaction in an acidic medium, it is of paramount importance to redesign iridium electrocatalysts into novel structures with organized morphology and high surface area. Here, we report on the designing of a well-defined and highly active hollow nanoframe based on iridium. The synthesis strategy was to control the shape of nickel nanostructures on which iridium nanoparticles will grow. After the growth of iridium on the surface, the next step was to etch the nickel core to form the NiIr hollow nanoframe. The etching procedure was found to be significant in controlling the hydroxide species on the iridium surface and by that affecting the performance. The catalytic performance of the NiIr hollow nanoframe was studied for oxygen evolution reaction and shows 29 times increased iridium mass activity compared to commercially available iridium-based catalysts. Our study provides novel insights to control the fabrication of iridium-shaped catalysts using 3d transition metal as a template and via a facile etching step to steer the formation of hydroxide species on the surface. These findings shall aid the community to finally create stable iridium alloys for polymer electrolyte membrane water electrolyzers, and the strategy is also useful for many other electrochemical devices such as batteries, fuel cells, sensors, and solar organic cells.

A Robust PtNi Nanoframe/N-Doped Graphene Aerogel Electrocatalyst with Both High Activity and Stability

Insufficient catalytic activity and stability and high cost are the barriers for Pt-based electrocatalysts in wide practical applications. Herein, a hierarchically porous PtNi nanoframe/N-doped graphene aerogel (PtNiNF-NGA) electrocatalyst with outstanding performance toward methanol oxidation reaction (MOR) in acid electrolyte has been developed via facile tert-butanol-assisted structure reconfiguration. The ensemble of high-alloying-degree-modulated electronic structure and correspondingly the optimum MOR reaction pathway, the structure superiorities of hierarchical porosity, thin edges, Pt-rich corners, and the anchoring effect of the NGA, endow the PtNiNF-NGA with both prominent electrocatalytic activity and stability. The mass and specific activity (1647 mA mg_Pt ^-1 , 3.8 mA cm^-2 ) of the PtNiNF-NGA are 5.8 and 7.8 times higher than those of commercial Pt/C. It exhibits exceptional stability under a 5-hour chronoamperometry test and 2200-cycle cyclic voltammetry scanning.

The mechanism of Co oxyhydroxide nano-islands deposited on a Pt surface to promote the oxygen reduction reaction at the cathode of fuel cells

With the rapid development of fuel cell technology, the low reduction rate of oxygen on Pt-based cathodes is generally considered the main obstacle. Pt/transition metal alloys (Pt-Ms) or Pt/transition metal oxides (Pt-MO _x ) can be formed by doping transition metal atoms into the lattice of the Pt layer or depositing onto the surface of the Pt layer to intensify the catalytic activity of the electrodes. In this work, a stepwise solution chemical reduction method for high dispersion of cobalt oxyhydroxide (-OCoOH) deposited onto the facet of Pt as nano-islands and the mechanism of promoting the oxygen reduction reaction (ORR) at the cathode have been investigated by density functional theory (DFT) calculation. As a result, the electrocatalytic activity of Pt with nano-island -OCoOH structure was 3.6 times that of the Pt/C catalyst, which indicated that promoting the desorption of the first O atom and weakening the adsorption capacity of the interfacial junction Pt for the second O atom from adsorbed oxygen attributed to the migration of d-band center in Pt and the existence of the Co hydroxyl group.

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Surfactant-Free One-Pot Synthesis of Homogeneous Trimetallic PtNiCu Nanoparticles with Size Control by Using Glycine

Homogeneous platinum alloy nanoparticles (NPs) are of great interest to the electrocatalytic community for potential use in various fuel cell electrodes. Increasing the surface area available per unit mass by decreasing the size of NPs while maintaining or improving activity is one of the key tasks of fuel cell catalysis. Achieving both in a synthesis of multielement NPs is still a challenging workup. In this investigation, we report the use of glycine as a size control agent to make ultrasmall homogeneous trimetallic PtNiCu NPs within 2-5 nm range. The mechanistic roles of dimethyl formamide (DMF), formaldehyde, water, and glycine are explored to understand the formation of these small NPs. Interestingly, it was observed that these PtNiCu NPs exhibited substantially enhanced mass activities toward the electro-oxidation of ethanol in comparison to commercial Pt black.

Facile synthesis of ternary PtPdCu alloy hexapods as highly efficient electrocatalysts for methanol oxidation

Developing an efficient Pt-based multimetallic electrocatalyst with well-defined shapes for methanol oxidation reaction (MOR) is critical, however, it still remains challenging. Here we report a one-pot approach for the synthesis of ternary PtPdCu alloy hexapods with different compositions. Their MOR activities increased in the sequence Pt₂PdCu₄ < Pt₃PdCu₄ < Pt₅PdCu₅, and were substantially higher than that of commercial Pt/C. Specifically, the Pt₅PdCu₅ hexapods exhibited the highest mass (0.97 mA μg_Pt ^-1) and specific (7.39 mA cm^-2) activities towards MOR, and were 5.4 and 19.4 times higher than those of commercial Pt/C (0.18 mA μg_Pt ^-1 and 0.38 mA cm^-2), respectively. This enhancement could be probably attributed to the bifunctional mechanism and ligand effect through the addition of Cu and Pd as well as the unique dendritic structure. The better tolerance for CO poisoning also endowed the PtPdCu hexapods with superior durability relative to commercial Pt/C.

Catalytic Technologies for CO Hydrogenation for the Production of Light Hydrocarbons and Middle Distillates

In South Korea, where there are no resources such as natural gas or crude oil, research on alternative fuels has been actively conducted since the 1990s. The research on synthetic oil is subdivided into Coal to Liquid (CTL), Gas to Liquid (GTL), Biomass to Liquid (BTL), etc., and was developed with the focus on catalysts, their preparation, reactor types, and operation technologies according to the product to be obtained. In Fischer–Tropsch synthesis for synthetic oil from syngas, stability, CO conversion rate, and product selectivity of catalysts depends on the design of their components, such as their active material, promoter, and support. Most of the developed catalysts were Fe- and Co-based catalysts and were developed in spherical and cylindrical shapes according to the reactor type. Recently, hybrid catalysts in combination with cracking catalysts were developed to control the distribution of the product. In this review, we survey recent studies related to the design of catalysts for production of light hydrocarbons and middle distillates, including hybrid catalysts, encapsulated core–shell catalysts, catalysts with active materials with well-organized sizes and shapes, and catalysts with shape- and size-controlled supports. Finally, we introduce recent research and development (R&D) trends in the production of light hydrocarbons and middle distillates and in the catalytic processes being applied to the development of catalysts in Korea.

Nanofabrication of hollowed-out Au@AgPt core-frames via selective carving of silver and deposition of platinum

Nanofabrication of a hollowed-out Au@AgPt core-frame is presented, which is based on the selective deposition of Pt atoms on the active edges of the cubes and dissolution of Ag atoms from the {100} facets.

Ni(OH)2 Decorated Pt-Cu Octahedra for Ethanol Electrooxidation Reaction

Here we report the synthesis of 9 nm Ni(OH)2 decorated Pt-Cu octahedra (Ni(OH)2-PtCu) in one-pot synthesis for ethanol oxidation reaction (EOR) electrocatalysis in acidic electrolyte. To prepare Ni(OH)2-PtCu octahedra, CO gas was directly introduced in a reaction process as selective capping agents on the PtCu(111) facet. Ni(OH)2 was naturally deposited on the Pt-Cu octahedra during the synthesis. Carbon supported Ni(OH)2-PtCu (Ni(OH)2-PtCu/C) as an EOR catalyst showed enhanced CO tolerance due to the existence of oxophilic Ni(OH)2 on the surface of Pt-Cu, facilitating water dissolution to produce OH adsorption and to promote complete CO oxidation to CO2. In addition, Pt-Cu alloy composition also showed improvement of CO tolerance because of modified d-band structure of the Pt atoms, thereby weakening the binding strength of CO on the catalysts. Therefore, the Ni(OH)2-PtCu/C showed enhanced EOR activity and durability compared to the Pt-Cu octahedra and commercial Pt/C counterparts.

Alloy Nanocatalysts for the Electrochemical Oxygen Reduction (ORR) and the Direct Electrochemical Carbon Dioxide Reduction Reaction (CO2 RR)

In the face of the global energy challenge and progressing global climate change, renewable energy systems and components, such as fuel cells and electrolyzers, which close the energetic oxygen and carbon cycles, have become a technology development priority. The electrochemical oxygen reduction reaction (ORR) and the direct electrochemical carbon dioxide reduction reaction (CO₂ RR) are important electrocatalytic processes that proceed at gas diffusion electrodes of hydrogen fuel cells and CO₂ electrolyzers, respectively. However, their low catalytic activity (voltage efficiency), limited long-term stability, and moderate product selectivity (related to their Faradaic efficiency) have remained challenges. To address these, suitable catalysts are required. This review addresses the current state of research on Pt-based and Cu-based nanoalloy electrocatalysts for ORR and CO₂ RR, respectively, and critically compares and contrasts key performance parameters such as activity, selectivity, and durability. In particular, Pt nanoparticles alloyed with transition metals, post-transition metals and lanthanides, are discussed, as well as the material characterization and their performance for the ORR. Then, bimetallic Cu nanoalloy catalysts are reviewed and organized according to their main reaction product generated by the second metal. This review concludes with a perspective on nanoalloy catalysts for the ORR and the CO₂ RR, and proposes future research directions.

Noble Metal Based Alloy Nanoframes: Syntheses and Applications in Fuel Cells

Noble metal nanostructures are being used broadly as catalysts for energy conversion in fuel cells. To overcome the future energy crises, fuel cells are anticipated as clean energy sources because they can be operated at low temperature, their energy conversion is high and their carbon release is almost zero. However, an active and stable electrocatalyst is essential for the electrochemical reactions in fuel cells. Therefore, properties of the nanostructures greatly depend on the shape of the nanostructures. Individual as well as interaction properties are greatly affected by changes in the surface area of the nanostructures. By shape controlled synthesis, properties of the nanostructures could be further enhanced by increasing the surface area or active sites for electrocatalysts. Therefore, an efficient approach is needed for the fabrication of nanostructures to increase their efficiency, activity, or durability in fuel cells by reducing the usage of noble metals. Different types of hollow nanostructures until now have been prepared including nanoboxes, nanocages, nanoshells, nanoframes (NFs), etc. NFs are the hollow unique three-dimensional structure which have no walls-they only contain corners or edges so they have large surface area. In electrocatalytic reactions, the molecules involved in the reaction can easily reach the inner surface of the nanoframes, thus noble metals' utilization efficiency increases. NFs usually have high surface area, greater morphological and compositional stabilities, allowing them to withstand harsh environmental conditions. By considering the current challenges in fabrication of noble metal based alloy NFs as electrocatalysts, this review paper will highlight recent progress, design, and fabrication of noble metal alloy NFs through different strategies-mainly photocatalytic template, electrodeposition, Kirkendall effect, galvanic replacement, chemical/oxidative etching, combination of both and other methods. Then, electrochemical applications of NFs in fuel cells toward formic acid, methanol, ethanol, oxygen reduction reaction as well as bifunctional catalyst will also be highlighted. Finally, we will summarize different challenges in the fabrication of highly proficient nanocatalysts for the fuel cells with low cost, high efficiency and high durability, which are the major issues for the highly commercial use of fuel cells in the future.

Preparation of Pt-skin PtRhNi Nanoframes Decorated with Small SnO2 Nanoparticles as an Efficient Catalyst for Ethanol Oxidation Reaction

Pt-based nanoframes are one of the most promising catalysts for ethanol oxidation reaction in direct ethanol fuel cells. It is important to understand the mechanisms responsible for creating these hollow nanoframe-based catalysts. Herein, for the first time, Pt-skin PtRhNi rhombic dodecahedral nanoframes were decorated with small SnO₂ nanoparticles and were used as an efficient catalyst for the ethanol oxidation reaction. Moreover, by combining the ex situ scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy observations at various stages of synthesis, along with density functional theory calculations, it was possible to track the synthesis route of solid rhombic dodecahedral PtRhNi nanoparticles, which are the precursors of PtRhNi nanoframes. After the chemical etching of the Ni core from solid PtRhNi nanoparticles, the obtained nanoframes were decorated with SnO₂ nanoparticles. The resulting SnO₂@PtRhNi heteroaggregates were deposited on high-surface-area carbon and electrochemically tested, showing a 6-fold higher mass activity and 10-fold higher specific activity toward ethanol oxidation reaction than commercially available Pt catalysts.

Rh-doped PdAg nanoparticles as efficient methanol tolerance electrocatalytic materials for oxygen reduction

Direct methanol fuel cells (DMFCs) have received extensive attention on their high efficiency, high reliability, and no carbon emission. Unfortunately, the poor methanol tolerance and sluggish oxygen reduction reaction (ORR) at cathode have seriously hindered their further development. Herein we report the synthesis of a new class of Rh-doped PdAg alloy nanoparticles (NPs) for boosting ORR activity with high methanol tolerance capacity concurrently. The ORR mass activity of typical Rh₄Pd₄₀Ag₅₆ NPs is 4.2 times higher than that of commercial Pt catalyst. Moreover, it shows a great methanol tolerance capability by maintaining 92.4% in ORR mass activity in alkaline solution with 0.1 mol L^-1 methanol, against a big decrease of almost 100% for commercial Pt. Even after 30,000 potential cycles with 1.0 mol L^-1 methanol, Rh₄Pd₄₀Ag₅₆ NPs still retain ORR mass activity of up to 68.3%. DFT calculations reveal that excellent ORR performance with excellent methanol tolerance originates the active d-band-pinning engineering for an efficient site-independent electron-transfer. A generalized d-band mediated fine electron-transfer tuning path has blueprinted for effectively minimizing intrinsic ORR barriers with high current density. The present work highlights the key role of Rh doping in enhancing the ORR activity and methanol tolerance ability of PdAg NPs for future high-performance DMFCs.

Fe(CN)5@PIL-derived N-doped porous carbon with FeCxNy active sites as a robust electrocatalyst for the oxygen reduction reaction

FeC_xN_y/N-PC catalysts derived by Fe(CN)5@PILs show high performance and catalytic activity for the ORR.

Galvanic replacement mediated 3D porous PtCu nano-frames for enhanced ethylene glycol oxidation

Galvanic replacement mediated 3D porous PtCu nano-frames possessed enhanced electrocatalytic activity and stability during ethylene glycol oxidation.

RuOx-decorated multimetallic hetero-nanocages as highly efficient electrocatalysts toward the methanol oxidation reaction

Direct methanol fuel cell technology awaits the development of highly efficient and robust nanocatalysts driving the methanol oxidation reaction (MOR) in a CO poisoning-free fashion. Thus far, various Pt-based alloy nanoparticles have been studied as electrocatalysts toward the MOR, and it has been found that the introduction of dopants such as Ru and Cu to Pt has been particularly successful in mitigating the CO poisoning problem. Herein, we report a facile synthesis of Ru-branched RuPtCu nanocages that involves in situ formation of Ru-doped PtCu nanoparticles and subsequent outgrowth of Ru branches by insertion of additional Ru precursors. We show that the electrocatalytic activity and stability of Ru branched RuPtCu ternary nanocages toward the MOR are greatly improved compared to those of PtCu/C and RuPtCu/C counterparts and state-of-the-art PtRu/C and Pt/C catalysts, mainly due to the synergy between the CO-tolerant RuO_x phase and the highly open and robust RuPtCu nanoframe.

Hollow nanoparticles as emerging electrocatalysts for renewable energy conversion reactions

While the realization of clean and sustainable energy conversion systems primarily requires the development of highly efficient catalysts, one of the main issues had been designing the structure of the catalysts to fulfill minimum cost as well as maximum performance. Until now, noble metal-based nanocatalysts had shown outstanding performances toward the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). However, the scarcity and high cost of them impeded their practical use. Recently, hollow nanostructures including nanocages and nanoframes had emerged as a burgeoning class of promising electrocatalysts. The hollow nanostructures could expose a high proportion of active surfaces while saving the amounts of expensive noble metals. In this review, we introduced recent advances in the synthetic methodologies for generating noble metal-based hollow nanostructures based on thermodynamic and kinetic approaches. We summarized electrocatalytic applications of hollow nanostructures toward the ORR, OER, and HER. We next provided strategies that could endow structural robustness to the flimsy structural nature of hollow structures. Finally, we concluded this review with perspectives to facilitate the development of hollow nanostructure-based catalysts for energy applications.

Recent advances in electrocatalysts toward the oxygen reduction reaction: the case of PtNi octahedra

Designing highly efficient and durable electrocatalysts for the oxygen reduction reaction (ORR), the key step for the operation of polymer electrolyte membrane fuel cells (PEMFCs), is of a pivotal importance for advancing PEMFC technology. Since the most significant progress has been made on Pt3Ni(111) alloy surfaces, nanoscale PtNi alloy octahedra enclosed by (111) facets have emerged as promising electrocatalysts toward the ORR. However, because their practical uses have been hampered by the cost, sluggish reaction kinetics, and poor durability, recent advances have engendered a wide variety of structure-, size-, and composition-controlled bimetallic PtNi octahedra. Herein, we therefore review the important recent developments of PtNi octahedral electrocatalysts point by point to give an overview of the most promising strategies. Specifically, the present review article focuses on the synthetic methods for the PtNi octahedra, the core-shell and multi-metallic strategies for performance improvement, and their structure-, size-, and composition-control-based ORR activity. By considering the results achieved in this field, a prospect for this alloy nanocatalysts system for future sustainable energy applications is also proposed.

Dendrite-Embedded Platinum-Nickel Multiframes as Highly Active and Durable Electrocatalyst toward the Oxygen Reduction Reaction

Pt-based nanoframe catalysts have been explored extensively due to their superior activity toward the oxygen reduction reaction (ORR). Herein, we report the synthesis of Pt-Ni multiframes, which exhibit the unique structure of tightly fused multiple nanoframes and reinforced by an embedded dendrite. Rapid reduction and deposition of Ni atoms on Pt-Ni nanodendrites induce the alloying/dealloying of Pt and Ni in the overall nanostructures. After chemical etching of Ni, the newly formed dendrite-embedded Pt-Ni multiframes show an electrochemically active surface area (ECSA) of 73.4 m² g_Pt^-1 and a mass ORR activity of 1.51 A mg_Pt^-1 at 0.93 V, which is 30-fold higher than that of the state-of-the-art Pt/C catalyst. We suggest that high ECSA and ORR performances of dendrite-embedded Pt-Ni multiframes/C can be attributed to the porous nanostructure and numerous active sites exposed on surface grain boundaries and high-indexed facets.