Hydration Layer Structure of Biofouling-Resistant Nanoparticles

Sandwich assay for β-lactoglobulin in infant food formula based on a hierarchically architectured antifouling capture probe and fluorescent recognition probe

Tracing the presence of allergenic β-lactoglobulin (β-Lg) in infant foods is an urgent need, but the interference from the protein-rich matrix often hampered the detection accuracy. Here, we developed a sandwich assay for β-Lg in infant food formula based on a hierarchically architectured antifouling capture probe and fluorescent recognition probe. The antifouling capture probe was constructed from the polydopamine-coated magnetic particles (Fe3O4@PDA), which was modified with repeated glutamic acid-lysine (EK) antifouling peptide and aptamer towards β-Lg. The spatial arrangement of these ligands on the Fe3O4@PDA surface was carefully tailored. Furthermore, a fluorescent recognition probe based on aptamer-modified silica-doped carbon quantum dot was developed to explore a sandwich assay for β-Lg with the capture probe. The sandwich assay was proved to have high potential in detecting β-Lg in commercially available infant food samples. The work provided a new approach to developing detection methods with matrix interference-resistant properties.

Design, preparation, and characterization of lubricating polymer brushes for biomedical applications

The lubrication modification of biomedical devices significantly enhances the functionality of implanted interventional medical devices, thereby providing additional benefits for patients. Polymer brush coating provides a convenient and efficient method for surface modification while ensuring the preservation of the substrate's original properties. The current research has focused on a "trial and error" method to finding polymer brushes with superior lubricity qualities, which is time-consuming and expensive, as obtaining effective and long-lasting lubricity properties for polymer brushes is difficult. This review summarizes recent research advances in the biomedical field in the design, material selection, preparation, and characterization of lubricating and antifouling polymer brushes, which follow the polymer brush development process. This review begins by examining various approaches to polymer brush design, including molecular dynamics simulation and machine learning, from the fundamentals of polymer brush lubrication. Recent advancements in polymer brush design are then synthesized and potential avenues for future research are explored. Emphasis is placed on the burgeoning field of zwitterionic polymer brushes, and highlighting the broad prospects of supramolecular polymer brushes based on host-guest interactions in the field of self-repairing polymer brush applications. The review culminates by providing a summary of methodologies for characterizing the structural and functional attributes of polymer brushes. It is believed that a development approach for polymer brushes based on "design-material selection-preparation-characterization" can be created, easing the challenge of creating polymer brushes with high-performance lubricating qualities and enabling the on-demand creation of coatings. STATEMENT OF SIGNIFICANCE: Biomedical devices have severe lubrication modification needs, and surface lubrication modification by polymer brush coating is currently the most promising means. However, the design and preparation of polymer brushes often involves "iterative testing" to find polymer brushes with excellent lubrication properties, which is both time-consuming and expensive. This review proposes a polymer brush development process based on the "design-material selection-preparation-characterization" strategy and summarizes recent research advances and trends in the design, material selection, preparation, and characterization of polymer brushes. This review will help polymer brush researchers by alleviating the challenges of creating polymer brushes with high-performance lubricity and promises to enable the on-demand construction of polymer brush lubrication coatings.

Peptide-antifouling interface for monitoring β-amyloid based on electrochemiluminescence resonance energy transfer

In this study, a novel antifouling electrochemiluminescence (ECL) analytical platform has been developed for the highly sensitive quantification of β-amyloid (Aβ) peptides based on the ECL resonance energy transfer (ECL-RET) mechanism. Specifically, glassy carbon electrodes (GCE) were initially coated with graphite-phase carbon nitride (g-C3N4) nanosheets, followed by the electropolymerization of polyaniline (PANI) onto the electrode surface. Subsequently, a promising peptide motif candidate (COOH-CPPPPDKDKDKDKKLVFF) was immobilized onto the PANI-modified electrode, functioning as a critical component for both antifouling and specific recognition of full-length Aβ peptides. Furthermore, this peptide motif demonstrated inhibitory effects on Aβ aggregation and dissociation. Upon immobilization of the peptide motif, Aβ aptamer-CdS QDs were bound to the electrode surface through peptide-specific interactions with Aβ, thereby facilitating the highly sensitive ECL detection of Aβ. Under the optimal conditions, the proposed biosensor exhibited an Aβ detection range from 0.1 pM to 100 nM with a detection limit of 16.1 fM. As such, this innovative platform offers a straightforward approach to antifouling, quantification, and monitoring of Aβ concentrations in the blood samples.

Gold nanoparticle adsorption alters the cell stiffness and cell wall bio-chemical landscape of Candida albicans fungal cells

HYPOTHESIS

Nanomaterials have been extensively investigated for a wide range of biomedical applications, including as antimicrobial agents, drug delivery vehicles, and diagnostic devices. The commonality between these biomedical applications is the necessity for the nanoparticle to interact with or pass through the cellular wall and membrane. Cell-nanomaterial interactions/uptake can occur in various ways, including adhering to the cell wall, forming aggregates on the surface, becoming absorbed within the cell wall itself, or transversing into the cell cytoplasm. These interactions are common to mammalian cells, bacteria, and yeast cells. This variety of interactions can cause changes to the integrity of the cell wall and the cell overall, but the precise mechanisms underpinning such interactions remain poorly understood. Here, we investigate the interaction between commonly investigated gold nanoparticles (AuNPs) and the cell wall/membrane of a model fungal cell to explore the general effects of interaction and uptake.

EXPERIMENTS

The interactions between 100 nm citrate-capped AuNPs and the cell wall of Candida albicans fungal cells were studied using a range of advanced microscopy techniques, including atomic force microscopy, confocal laser scanning microscopy, scanning electron microscopy, transmission electron microscopy, and synchrotron-FTIR micro-spectroscopy.

FINDINGS

In most cases, particles adhered on the cell surface, although instances of particles being up-taken into the cell cytoplasm and localised within the cell wall and membrane were also observed. There was a measurable increase in the stiffness of the fungal cell after AuNPs were introduced. Analysis of the synchrotron-FTIR data showed significant changes in spectral features associated with phospholipids and proteins after exposure to AuNPs.

Three-dimensional ordering of water molecules reflecting hydroxyl groups on sapphire (001) and α-quartz (100) surfaces

Water molecules on oxide surfaces influence the chemical reactivity and molecular adsorption behavior of oxides. Herein, three-dimensional atomic force microscopy (3D-AFM) and molecular dynamics simulations are used to visualize the surface hydroxyl (OH) groups and their hydration structures on sapphire (001) and α-quartz (100) surfaces at the atomic-scale. The obtained results revealed that the spatial density distributions and hydrogen-bonding strengths of surface OH groups affect their local hydration structures. In particular, the force curves obtained by 3D-AFM suggest that the hydration forces of water molecules intensify at sites where water molecules strongly interact with the surface OH groups. The insights obtained in this study deepen our understanding of the affinities of Al2O3 and SiO2 for water molecules and contribute to the use of 3D-AFM in the investigation of atomic-scale hydration structures on various surfaces, thereby benefiting a wide range of research fields dealing with solid-liquid interfaces.

Zwitterionic coating assisted by dopamine with metal-phenolic networks loaded on titanium with improved biocompatibility and antibacterial property for artificial heart

Introduction: Titanium (Ti) and Ti-based alloy materials are commonly used to develop artificial hearts. To prevent bacterial infections and thrombus in patients with implanted artificial hearts, long-term prophylactic antibiotics and anti-thrombotic drugs are required, and this may lead to health complications. Therefore, the development of optimized antibacterial and antifouling surfaces for Ti-based substrate is especially critical when designing artificial heart implants. Methods: In this study, polydopamine and poly-(sulfobetaine methacrylate) polymers were co-deposited to form a coating on the surface of Ti substrate, a process initiated by Cu²⁺ metal ions. The mechanism for the fabrication of the coating was investigated by coating thickness measurements as well as Ultraviolet-visible and X-ray Photoelectron (XPS) spectroscopy. Characterization of the coating was observed by optical imaging, scanning electron microscope (SEM), XPS, atomic force microscope (AFM), water contact angle and film thickness. In addition, antibacterial property of the coating was tested using Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as model strains, while the material biocompatibility was assessed by the antiplatelet adhesion test using platelet-rich plasma and in vitro cytotoxicity tests using human umbilical vein endothelial cells and red blood cells. Results and discussion: Optical imaging, SEM, XPS, AFM, water contact angle, and film thickness tests demonstrated that the coating was successfully deposited on the Ti substrate surface. The biocompatibility and antibacterial assays showed that the developed surface holds great potential for improving the antibacterial and antiplatelet adhesion properties of Ti-based heart implants.

Antifouling graphene oxide membranes for oil-water separation via hydrophobic chain engineering

Engineering surface chemistry to precisely control interfacial interactions is crucial for fabricating superior antifouling coatings and separation membranes. Here, we present a hydrophobic chain engineering strategy to regulate membrane surface at a molecular scale. Hydrophilic phytic acid and hydrophobic perfluorocarboxylic acids are sequentially assembled on a graphene oxide membrane to form an amphiphilic surface. The surface energy is reduced by the introduction of the perfluoroalkyl chains while the surface hydration can be tuned by changing the hydrophobic chain length, thus synergistically optimizing both fouling-resistance and fouling-release properties. It is found that the surface hydration capacity changes nonlinearly as the perfluoroalkyl chain length increases from C₄ to C₁₀, reaching the highest at C₆ as a result of the more uniform water orientation as demonstrated by molecular dynamics simulations. The as-prepared membrane exhibits superior antifouling efficacy (flux decline ratio <10%, flux recovery ratio ~100%) even at high permeance (~620 L m^-2 h^-1 bar^-1) for oil-water separation.

Visualizing Molecular-Scale Adsorption Structures of Anti-freezing Surfactants on Sapphire (0001) Surfaces at Different Concentrations by 3D Scanning Force Microscopy

Anti-freezing surfactants form an adsorption layer at the solid-water interface to inhibit the nucleation and growth of ice. However, this mechanism has not been elucidated at the molecular scale because of the difficulties in visualizing such adsorption structures. In this study, we overcome this limitation by directly visualizing the three-dimensional (3D) adsorption structures of anti-freezing surfactants, hexadecyltrimethylammonium bromide (C₁₆TABs), on sapphire (0001) surfaces through 3D scanning force microscopy. We present molecularly resolved two-dimensional/3D images of the adsorption structures in solutions of 1, 10, and 100 ppm. At 1 ppm, the molecules form a monolayer with a flat-lying configuration. At 10 ppm, the molecular orientation is closer to the upright configuration, with a relatively large tilt angle. At 100 ppm, the molecules form a bilayer with almost upright configurations, providing excellent screening of the sapphire surface from water. Owing to the steric and electrostatic repulsion between adjacent molecular head groups, the surface of the bilayer exhibits relatively large fluctuations, inhibiting the formation of stable ice-like structures. The understanding of molecular-level mechanisms provides important guidelines for improving the design of anti-freezing surfactants for practical applications such as car coolants.

Hydration Structure at the Calcite-Water (10.4) Interface in the Presence of Rubidium Chloride

Solid-liquid interfaces are of significant importance in a multitude of geochemical and technological fields. More specifically, the solvation structure plays a decisive role in the properties of the interfaces. Atomic force microscopy (AFM) has been used to resolve the interfacial hydration structure in the presence and absence of ions. Despite many studies investigating the calcite-water interface, the impact of ions on the hydration structure at this interface has rarely been studied. Here, we investigate the calcite-water interface at various concentrations (ranging from 0 to 5 M) of rubidium chloride (RbCl) using three-dimensional atomic force microscopy (3D AFM). We present molecularly resolved images of the hydration structure at the interface. Interestingly, the characteristic pattern of the hydration structure appears similar regardless of the RbCl concentration. The presence of the ions is detected in an indirect manner by more frequent contrast changes and slice displacements.

Block Length-Dependent Protein Fouling on Poly(2-oxazoline)-Based Polymersomes: Influence on Macrophage Association and Circulation Behavior

Polymersomes are vesicular structures self-assembled from amphiphilic block copolymers and are considered an alternative to liposomes for applications in drug delivery, immunotherapy, biosensing, and as nanoreactors and artificial organelles. However, the limited availability of systematic stability, protein fouling (protein corona formation), and blood circulation studies hampers their clinical translation. Poly(2-oxazoline)s (POx) are valuable antifouling hydrophilic polymers that can replace the current gold-standard, poly(ethylene glycol) (PEG), yet investigations of POx functionality on nanoparticles are relatively sparse. Herein, a systematic study is reported of the structural, dynamic and antifouling properties of polymersomes made of poly(2-methyl-2-oxazoline)-block-poly(dimethylsiloxane)-block-poly(2-methyl-2-oxazoline) (PMOXA-b-PDMS-b-PMOXA). The study relates in vitro antifouling performance of the polymersomes to atomistic molecular dynamics simulations of polymersome membrane hydration behavior. These observations support the experimentally demonstrated benefit of maximizing the length of PMOXA (degree of polymerization (DP) > 6) while keeping PDMS at a minimal length that still provides sufficient membrane stability (DP > 19). In vitro macrophage association and in vivo blood circulation evaluation of polymersomes in zebrafish embryos corroborate these findings. They further suggest that single copolymer presentation on polymersomes is outperformed by blends of varied copolymer lengths. This study helps to rationalize design rules for stable and low-fouling polymersomes for future medical applications.

Computed Three-Dimensional Atomic Force Microscopy Images of Biopolymers Using the Jarzynski Equality

Three-dimensional atomic force microscopy (3D-AFM) has resolved three-dimensional distributions of solvent molecules at solid-liquid interfaces at the subnanometer scale. This method is now being extended to the imaging of biopolymer assemblies such as chromosomes or proteins in cells, with the expectation of being able to resolve their three-dimensional structures. Here, we have developed a computational method to simulate 3D-AFM images of biopolymers by using the Jarzynski equality. It is found that some parts of the fiber structure of biopolymers are indeed resolved in the 3D-AFM image. The dependency of 3D-AFM images on the vertical scanning velocity is investigated, and optimum scanning velocities are found. It is also clarified that forces in nonequilibrium processes are measured in 3D-AFM measurements when the dynamics of polymers are slower than the scanning of the probe.

Molecular Dynamics Study on Properties of Hydration Layers above Polymer Antifouling Membranes

Zwitterionic polymers as crucial antifouling materials exhibit excellent antifouling performance due to their strong hydration ability. The structure−property relationship at the molecular level still remains to be elucidated. In this work, the surface hydration ability of three antifouling polymer membranes grafting on polysiloxane membranes Poly(sulfobetaine methacrylate) (T4-SB), poly(3-(methacryloyloxy)propane-1-sulfonate) (T4-SP), and poly(2-(dimethylamino)ethyl methacrylate) (T4-DM) was investigated. An orderly packed, and tightly bound surface hydration layer above T4-SP and T4-SB antifouling membranes was found by means of analyzing the dipole orientation distribution, diffusion coefficient, and average residence time. To further understand the surface hydration ability of three antifouling membranes, the surface structure, density profile, roughness, and area percentage of hydrophilic surface combining electrostatic potential, RDFs, SDFs, and noncovalent interactions of three polymers’ monomers were studied. It was concluded that the broadest distribution of electrostatic potential on the surface and the nature of anionic SO3- groups led to the following antifouling order of T4-SB > T4-SP > T4-DM. We hope that this work will gain some insight for the rational design and optimization of ecofriendly antifouling materials.

Inner surface modification of ureteral stent polyurethane tubes based by plasma-enhanced chemical vapor deposition to reduce encrustation and biofilm formation

Encrustation and/or biofilm formation in ureteral stents are major causes of obstruction and reduce the lifetime of a ureteral stent. In this study, the inner surfaces of polyurethane (PU) tubes (inner and outer diameters of 1.2 and 2.0 mm, respectively) were reformed with Ar, O₂, and C₂H₂ gases using specialized plasma-enhanced chemical vapor deposition techniques for the first time. Then, the modified PU tubes were immersed in urine for 15 days, and the characteristics of the inner surfaces were analyzed. Depending on the modification procedure, the corresponding inner surface exhibited different chemical properties and different rates of encrustation and biofilm formation. For a hydrophilic surface treated with Ar and O₂, encrustation and biofilm formation increased, while for the C₂H₂ coating, the development of encrustation and biofilm reduced by more than five times compared with the untreated bare PU tube. This study demonstrated that inner plasma surface modification of ureteral stents greatly enhances resistance to encrustation and biofilm formation.

Visualizing intracellular nanostructures of living cells by nanoendoscopy-AFM

Atomic force microscopy (AFM) is the only technique that allows label-free imaging of nanoscale biomolecular dynamics, playing a crucial role in solving biological questions that cannot be addressed by other major bioimaging tools (fluorescence or electron microscopy). However, such imaging is possible only for systems either extracted from cells or reconstructed on solid substrates. Thus, nanodynamics inside living cells largely remain inaccessible with the current nanoimaging techniques. Here, we overcome this limitation by nanoendoscopy-AFM, where a needle-like nanoprobe is inserted into a living cell, presenting actin fiber three-dimensional (3D) maps, and 2D nanodynamics of the membrane inner scaffold, resulting in undetectable changes in cell viability. Unlike previous AFM methods, the nanoprobe directly accesses the target intracellular components, exploiting all the AFM capabilities, such as high-resolution imaging, nanomechanical mapping, and molecular recognition. These features should greatly expand the range of intracellular structures observable in living cells.

Visualization of Ion|Surface Binding and In Situ Evaluation of Surface Interaction Free Energies via Competitive Adsorption Isotherms

Function and properties at biologic as well as technological interfaces are controlled by a complex and concerted competition of specific and unspecific binding with ions and water in the electrolyte. It is not possible to date to directly estimate by experiment the interfacial binding energies of involved species in a consistent approach, thus limiting our understanding of how interactions in complex (physiologic) media are moderated. Here, we employ a model system utilizing polymers with end grafted amines interacting with a negatively charged mica surface. We measure interaction forces as a function of the molecule density and ion concentration in NaCl solutions. The measured adhesion decreases by about 90%, from 0.01 to 1 M electrolyte concentration. We further demonstrate by molecular resolution imaging how ions increasingly populate the binding surface at elevated concentrations, and are effectively competing with the functional group for a binding site. We demonstrate that a competing Langmuir isotherm model can describe this concentration-dependent competition. Further, based on this model we can quantitatively estimate ion binding energies, as well as binding energy relationships at a complex solid|liquid interface. Our approach enables the extraction of thermodynamic interaction energies and kinetic parameters of ionic species during monolayer level interactions at a solid|liquid interface, which to-date is impossible with other techniques.

Tip Charge Dependence of Three-Dimensional AFM Mapping of Concentrated Ionic Solutions

A molecular scale understanding of the organization and structure of a liquid near a solid surface is currently a major challenge in surface science. It has implications across different fields from electrochemistry and energy storage to molecular biology. Three-dimensional AFM generates atomically resolved maps of solid-liquid interfaces. The imaging mechanism behind those maps is under debate, in particular, for concentrated ionic solutions. Theory predicts that the observed contrast should depend on the tip's charged state. Here, by using neutrally, negatively, and positively charged tips, we demonstrate that the 3D maps depend on the tip's polarization. A neutral tip will explore the total particle density distribution (water and ions) while a charged tip will reveal the charge density distribution. The experimental data reproduce the key findings of the theory.

Polydopamine/poly(sulfobetaine methacrylate) Co-deposition coatings triggered by CuSO4/H2O2 on implants for improved surface hemocompatibility and antibacterial activity

Implanted biomaterials such as medical catheters are prone to be adhered by proteins, platelets and bacteria due to their surface hydrophobicity characteristics, and then induce related infections and thrombosis. Hence, the development of a versatile strategy to endow surfaces with antibacterial and antifouling functions is particularly significant for blood-contacting materials. In this work, CuSO4/H2O2 was used to trigger polydopamine (PDA) and poly-(sulfobetaine methacrylate) (PSBMA) co-deposition process to endow polyurethane (PU) antibacterial and antifouling surface (PU/PDA(Cu)/PSBMA). The zwitterions contained in the PU/PDA(Cu)/PSBMA coating can significantly improve surface wettability to reduce protein adsorption, thereby improving its blood compatibility. In addition, the copper ions released from the metal-phenolic networks (MPNs) imparted them more than 90% antibacterial activity against E. coli and S. aureus. Notably, PU/PDA(Cu)/PSBMA also exhibits excellent performance in vivo mouse catheter-related infections models. Thus, the PU/PDA(Cu)/PSBMA has great application potential for developing multifunctional surface coatings for blood-contacting materials so as to improve antibacterial and anticoagulant properties.

Confined Channels Induced Coalescence Demulsification and Slippery Interfaces Constructed Fouling Resist-Release for Long-Lasting Oil/Water Separation

Superwetting membranes based on steric exclusion and affinity difference have drawn substantial interest for oil/water separation. However, the state-of-the-art membranes fail to literally sort out fouling and permeability decline and so limit their viability for long-term separation. Inspired by Dayu's philosophy of "draining rather than blocking water", herein, we achieve a long-lasting and efficient separation for viscous emulsions by designing poly(hydroxyethyl methylacrylate) (PHEMA)- and polydimethylsiloxane (PDMS)-compensated poly(vinylidene fluoride) membranes based on coalescence demulsification via chemical coordination phase separation. The symmetric and torturous microporous structure facilitated oil spatial confining and coalescence demulsification, while the synergistic compensation of PHEMA and PDMS coordinated the fouling resist and release properties, which was confirmed by multichannel confocal laser scanning microscopy. The developed membrane shows an unprecedented permeability half-life (τ) for viscous emulsions (e.g., decamethylcyclopentasiloxane, soybean oil paraffin, n-hexadecane, and isooctane) under cross-flow operation, far more beyond common superwetting membranes under applied bench-scale dead-end filtration. Our technique for designing "nonfouling" membranes opens up opportunities for advancing next-generation membranes for oil/water separation.

Marine antifouling coatings with surface topographies triggered by phase segregation

Marine biofouling is a ubiquitous and longstanding challenge that causes both economic and environmental problems. To address this, several antifouling strategies have been proposed, such as the release of biocidal compounds or surface chemical/physical design. Here we report a coating with surface structures (chemical heterogeneity) triggered by phase segregation, which endues the good antifouling properties, alongside robust mechanical properties, low underwater oil adhesion, and excellent optical transparency. This is achieved by arranging the hydrophobic and hydrophilic components to control the assembly and phase separation under the cross-linking and localized swelling process. The structure designs are based on the poly(ethylene glycols) (PEG), zwitterions, and hydrophobic components, which may lower the entropic and enthalpic driving forces for the adsorption of the marine organisms. Our approach could provide an effective way of manufacturing novel coating with amphiphilic micro/nanodomains structure, particularly for the marine industry. And we also showed that the coatings were stable under different temperatures and shear environments. To illustrate the applicability of such a robust coating in marine biofouling, we demonstrated significantly reduced algal adhesion and barnacle attachment in the sea (p < 0.01). We envision that this work will provide great potential for the application in antifouling marine coatings.

Electrochemical Biosensor with Enhanced Antifouling Capability for COVID-19 Nucleic Acid Detection in Complex Biological Media

Biofouling caused by the accumulation of biomolecules on sensing surfaces is one of the major problems and challenges to realize the practical application of electrochemical biosensors, and an effective way to counter this problem is the construction of antifouling biosensors. Herein, an antifouling electrochemical biosensor was constructed based on electropolymerized polyaniline (PANI) nanowires and newly designed peptides for the detection of the COVID-19 N-gene. The inverted Y-shaped peptides were designed with excellent antifouling properties and two anchoring branches, and their antifouling performances against proteins and complex biological media were investigated using different approaches. Based on the biotin-streptavidin affinity system, biotin-labeled probes specific to the N-gene (nucleocapsid phosphoprotein) of COVID-19 were immobilized onto the peptide-coated PANI nanowires, forming a highly sensitive and antifouling electrochemical sensing interface for the detection of COVID-19 nucleic acid. The antifouling genosensor demonstrated a wide linear range (10-14 to 10-9 M) and an exceptional low detection limit (3.5 fM). The remarkable performance of the genosensor derives from the high peak current of PANI, which is chosen as the sensing signal, and the extraordinary antifouling properties of designed peptides, which guarantee accurate detection in complex systems. These crucial features represent essential elements for future rapid and decentralized clinical testing.

Lubricin as a tool for controlling adhesion in vivo and ex vivo

The ability to prevent or minimize the accumulation of unwanted biological materials on implantable medical devices is important in maintaining the long-term function of implants. To address this issue, there has been a focus on materials, both biological and synthetic, that have the potential to prevent device fouling. In this review, we introduce a glycoprotein called lubricin and report on its emergence as an effective antifouling coating material. We outline the versatility of lubricin coatings on different surfaces, describe the physical properties of its monolayer structures, and highlight its antifouling properties in improving implant compatibility as well as its use in treatment of ocular diseases and arthritis. This review further describes synthetic polymers mimicking the lubricin structure and function. We also discuss the potential future use of lubricin and its synthetic mimetics as antiadhesive biomaterials for therapeutic applications.

Peptide-Based Photocathodic Biosensors: Integrating a Recognition Peptide with an Antifouling Peptide

Accurate and sensitive detection of targets in practical biological matrixes such as blood, plasma, serum, or tissue fluid is a frontier issue for most biosensors since the coexistence of both potential reducing agents and protein molecules has the possibility of causing signal interference. Herein, aiming at detection in a complex environment, an advanced and robust peptide-based photocathodic biosensor, which integrated a recognition peptide with an antifouling peptide in one probe electrode, was first proposed. Selecting human chorionic gonadotropin (hCG) as a model target, the recognition peptide with the sequence PPLRINRHILTR was first anchored on the CuBi₂O₄/Au (CBO/Au) photocathode and then the antifouling peptide with the sequence EKEKEKEPPPPC was further anchored to generate an antifouling biointerface. The peptide-based photocathodic biosensor demonstrated excellent anti-interference to both nonspecific proteins and reducing agents because of the capability of the antifouling peptide. It also exhibited good sensitivity owing to the utilization of the recognition peptide rather than an antibody probe. This peptide-integrated method offers a new perspective for practical applications of photocathodic biosensors.

Antiwetting and Antifouling Performances of Different Lubricant-Infused Slippery Surfaces

The concept of slippery lubricant-infused surfaces has shown promising potential in antifouling for controlling detrimental biofilm growth. In this study, nontoxic silicone oil was either impregnated into porous surface nanostructures, referred to as liquid-infused surfaces (LIS), or diffused into a polydimethylsiloxane (PDMS) matrix, referred to as a swollen PDMS (S-PDMS), making two kinds of slippery surfaces. The slippery lubricant layers have extremely low contact angle hysteresis, and both slippery surfaces showed superior antiwetting performances with droplets bouncing off or rolling transiently after impacting the surfaces. We further demonstrated that water droplets can remove dust from the slippery surfaces, thus showing a "cleaning effect". Moreover, "coffee-ring" effects were inhibited on these slippery surfaces after droplet evaporation, and deposits could be easily removed. The clinically biofilm-forming species P. aeruginosa (as a model system) was used to further evaluate the antifouling potential of the slippery surfaces. The dried biofilm stains could still be easily removed from the slippery surfaces. Additionally, both slippery surfaces prevented around 90% of bacterial biofilm growth after 6 days compared to the unmodified control PDMS surfaces. This investigation also extended across another clinical pathogen, S. epidermidis, and showed similar results. The antiwetting and antifouling analysis in this study will facilitate the development of more efficient slippery platforms for controlling biofouling.

Biomimetic biodegradable Ag@Au nanoparticle-embedded ureteral stent with a constantly renewable contact-killing antimicrobial surface and antibiofilm and extraction-free properties

Urinary tract infections (UTIs) caused by the contamination of the ureteral stent and the pain associated with secondary stent extractions are worldwide problems in the treatment of urinary tract disorders. Here, we reported a biodegradable, long-term antibacterial, and extraction-free ureteral stent with a constantly renewable contact-killing surface and an antibiofilm function achieved by constructing a hyperbranched poly(amide-amine)-capped Ag shell and Au core nanoparticle (Ag@Au NP)-embedded fiber membrane-structured poly(glycolic acid)/poly(lactic-co-glycolic acid) (PGA/PGLA) ureteral stent. The ureteral stent showed fast contact-killing properties, i.e., 5 min for Escherichia coli and 10 min for Staphylococcus aureus, with an inhibition rate higher than 99%. In addition, gradient degradation of PGA/PGLA endowed the stent with a self-cleaning property and long-term antibacterial function by continuous exfoliation of the stent surface, thereby exposing the inner Ag@Au NPs and eliminating adherent bacteria and proteins. Subsequently, in the 16-day in vitro degradation test, the stent showed durable bactericidal activity, less total release of Ag and Au elements (6.7%, ~8 μg), and low cytotoxicity (with a relative growth rate of >80% of L929 cells). In vivo experiments on a farm pig model showed that the stent exhibited a remarkable antibiofilm property and reduced the level of inflammatory and necrotic cells. After seven days of implantation, the stent showed a gradient degradation behavior and maintained structural integrity without the presence of any large fragments in the urinary system according to the B-ultrasonic examination. The as-developed biodegradable and renewable contact-killing antibacterial strategy was efficient in preparing the ureteral stent with antibiofilm and extraction-free properties to treat stent-induced UTI. Statement of significance This study presents a customized antibiofilm solution for biodegradable implants. Two particularly important aspects of this work are as follows.

Subnanometer-scale imaging of nanobio-interfaces by frequency modulation atomic force microscopy

Recently, there have been significant advancements in dynamic-mode atomic force microscopy (AFM) for biological applications. With frequency modulation AFM (FM-AFM), subnanometer-scale surface structures of biomolecules such as secondary structures of proteins, phosphate groups of DNAs, and lipid-ion complexes have been directly visualized. In addition, three-dimensional AFM (3D-AFM) has been developed by combining a high-resolution AFM technique with a 3D tip scanning method. This method enabled visualization of 3D distributions of water (i.e. hydration structures) with subnanometer-scale resolution on various biological molecules such as lipids, proteins, and DNAs. Furthermore, 3D-AFM also allows visualization of subnanometer-scale 3D distributions of flexible surface structures such as thermally fluctuating lipid headgroups. Such a direct local information at nano-bio interfaces can play a critical role in determining the atomic- or molecular-scale model to explain interfacial structures and functions. Here, we present an overview of these recent advancements in the dynamic-mode AFM techniques and their biological applications.

Improvements in fundamental performance of in-liquid frequency modulation atomic force microscopy

In-liquid frequency modulation atomic force microscopy (FM-AFM) has been used for visualizing subnanometer-scale surface structures of minerals, organic thin films and biological systems. In addition, three-dimensional atomic force microscopy (3D-AFM) has been developed by combining it with a three-dimensional (3D) tip scanning method. This method enabled the visualization of 3D distributions of water (i.e. hydration structures) and flexible molecular chains at subnanometer-scale resolution. While these applications highlighted the unique capabilities of FM-AFM, its force resolution, speed and stability are not necessarily at a satisfactory level for practical applications. Recently, there have been significant advancements in these fundamental performances. The force resolution was dramatically improved by using a small cantilever, which enabled the imaging of a 3D hydration structure even in pure water and made it possible to directly compare experimental results with simulated ones. In addition, the improved force resolution allowed the enhancement of imaging speed without compromising spatial resolution. To achieve this goal, efforts have been made for improving bandwidth, resonance frequency and/or latency of various components, including a high-speed phase-locked loop (PLL) circuit. With these improvements, now atomic-resolution in-liquid FM-AFM imaging can be performed at ∼1 s/frame. Furthermore, a Si-coating method was found to improve stability and reproducibility of atomic-resolution imaging owing to formation of a stable hydration structure on a tip apex. These improvements have opened up new possibilities of atomic-scale studies on solid-liquid interfacial phenomena by in-liquid FM-AFM.

Fungal spore adhesion on glycidoxypropyltrimethoxy silane modified silica nanoparticle surfaces as revealed by single cell force spectroscopy

Thin film coatings prepared from commercially available glycidoxypropyltrimethoxysilane (GPS) modified silica nanoparticles (SiNPs) (Bindzil® CC301 and Bindzil® CC302) have previously shown excellent antifouling performance against a broad range of microbes [Molino et al., "Hydration layer structure of biofouling-resistant nanoparticles," ACS Nano 12, 11610 (2018)]. In this work, single cell force spectroscopy (SCFS) was used to measure the biological interactions between Epicoccum nigrum fungal spores and the same silica nanoparticle-based surfaces used in the aforementioned study, including a: glass coverslip, unmodified SiNP coatings, and both low (Bindzil® CC301) and high density (CC302) GPS functionalized SiNP coatings as a function of NaCl concentration. From the SCFS curves, the spore adhesion to the surface was greatest on the glass coverslip (20-80 nN) followed by the unmodified SiNP (3-5 nN) across all salt concentrations. Upon approach to both surfaces, the spores showed a long-range attraction generally with a profile characteristic of biointeractions and likely those of the outer cell wall structures or biological constituents. The attractive force allowed the spores to initially adhere to the surface and was found to be linearly proportional to the spore adhesion. In comparison, both high and low density GPS-SINP significantly reduced the spore adhesion (0.5-0.9 nN). In addition, the spore adhesion on high density GPS-SiNP occurred in only 14%-27% of SCFS curves (40%-48% for low density GPS-SiNP) compared to 83%-97% for the unmodified SiNP, indicating that in most cases the GPS functionalization completely prevented spore adhesion. The GPS-SiNP surfaces conversely showed a long-range electrostatic repulsion at low 1mM NaCl that was replaced by short-range repulsion at the higher salt concentrations. From the findings, it is proposed that the attractive force is a critical step in initial adhesion processes of the spore. The effective antifouling properties of the GPS are attributed to the ability to negate the attractive forces, either through electrostatic repulsion in low salt conditions and primarily from short-range repulsion correlating to the previously reported combined steric-hydration effect of the GPS functionalization on SiNP coatings.

Glycogen as a Building Block for Advanced Biological Materials

Biological nanoparticles found in living systems possess distinct molecular architectures and diverse functions. Glycogen is a unique biological polysaccharide nanoparticle fabricated by nature through a bottom-up approach. The biocatalytic synthesis of glycogen has evolved over time to form a nanometer-sized dendrimer-like structure (20-150 nm) with a highly branched surface and a dense core. This makes glycogen markedly different from other natural linear or branched polysaccharides and particularly attractive as a platform for biomedical applications. Glycogen is inherently biodegradable, nontoxic, and can be functionalized with diverse surface and internal motifs for enhanced biofunctional properties. Recently, there has been growing interest in glycogen as a natural alternative to synthetic polymers and nanoparticles in a range of applications. Herein, the recent literature on glycogen in the material-based sciences, including its use as a constituent in biodegradable hydrogels and fibers, drug delivery vectors, tumor targeting and penetrating nanoparticles, immunomodulators, vaccine adjuvants, and contrast agents, is reviewed. The various methods of chemical functionalization and physical assembly of glycogen nanoparticles into multicomponent nanodevices, which advance glycogen toward a functional therapeutic nanoparticle from nature and back again, are discussed in detail.

Antimicrobial Metal Nanomaterials: From Passive to Stimuli-Activated Applications

The development of antimicrobial drug resistance among pathogenic bacteria and fungi is one of the most significant health issues of the 21st century. Recently, advances in nanotechnology have led to the development of nanomaterials, particularly metals that exhibit antimicrobial properties. These metal nanomaterials have emerged as promising alternatives to traditional antimicrobial therapies. In this review, a broad overview of metal nanomaterials, their synthesis, properties, and interactions with pathogenic micro-organisms is first provided. Secondly, the range of nanomaterials that demonstrate passive antimicrobial properties are outlined and in-depth analysis and comparison of stimuli-responsive antimicrobial nanomaterials are provided, which represent the next generation of microbiocidal nanomaterials. The stimulus applied to activate such nanomaterials includes light (including photocatalytic and photothermal) and magnetic fields, which can induce magnetic hyperthermia and kinetically driven magnetic activation. Broadly, this review aims to summarize the currently available research and provide future scope for the development of metal nanomaterial-based antimicrobial technologies, particularly those that can be activated through externally applied stimuli.

Modified silica nanoparticle coatings: Dual antifouling effects of self-assembled quaternary ammonium and zwitterionic silanes

This work examines the antifouling effect of quaternary ammonium silane (QAS) grafted from coatings of silica nanoparticles (SiNPs), independently and in combination with a zwitterionic sulfobetaine (SB) silane. The binding of QAS to the SiNP coatings was monitored using quartz crystal microgravimetry with dissipation monitoring (QCM-D) under varied pH and solution concentrations. Adsorption of bovine serum albumin protein was reduced on QAS modified SiNP coatings prepared under alkaline conditions due to the proposed generation of a pseudozwitterionic interface, where the underlying SiNP surface presents an anionic charge at high pH. Significant reductions in protein binding were achieved at low functionalization concentrations and short modification times. Additionally, SiNP coatings modified with a combination of QAS and SB chemistries were investigated. Surface modifications were performed sequentially, varying silane concentration and order of addition, and monitored using QCM-D. Dual-functionalized surfaces presented enhanced resistance to protein adsorption compared to QAS or SB modified surfaces alone, even at low functionalization concentrations. The antiadhesive and antibacterial properties of functionalized surfaces were investigated by challenging the surfaces against the bacterium Escherichia coli. All dual-functionalized coatings showed equal or reduced bacterial adhesion compared to QAS and SB functionalizations alone, while coatings functionalized with high concentrations of combined chemistries reduced the adhesion of bacteria by up to 95% compared to control SiNP surfaces.

Nanoscale in silico classification of ligand functionalised surfaces for protein adsorption resistance

Non-specific protein adsorption represents a significant challenge for the design of efficient and safe nanoparticles for biomedical applications since it may prevent functional ligands to target the desired specific receptors which can limit the efficacy of novel drug delivery systems and biosensors. The biofilm formation initiated by protein adsorption on surfaces limits the lifetime and safety of medical implants and tissue regenerative scaffolds. The development of biofouling resistant surfaces is therefore a major goal for the widespread uptake of nanomedicine. Here, we provide a relatively simple computational screening method based on the rational physically grounded criteria that may suffice in selection of surface grafted ligands for protein rejection, and test whether these criteria can be extrapolated from a specific protein to generic protein-resistant surfaces. Using all-atom molecular dynamics simulations we characterise four types of ligand functionalised surfaces at aqueous interfaces in terms of the surface hydrophobicity and ligand dynamics. We demonstrate how our hypothesised interfacial design based on the select physical characteristics of the ligated surfaces can enable the rejection of a protein from the surface. The ligand screening procedure and the detailed atomistic characterisation of the protein rejection process presented suggest that minimizing the adsorption of surface active proteins requires specific surface topographies and ligand chemistries that are able to maximise the entropic penalty associated with the restriction of the ligand dynamics and trapping interfacial water by adsorbed proteins.

Fabrication of Mixed-Charge Polypeptide Coating for Enhanced Hemocompatibility and Anti-Infective Effect

Medical catheters are prone to fouling by protein adsorption and platelet adhesion/activation due to their hydrophobic surface, resulting in bacterial adhesion/biofilm formation, associated infection, and thrombosis. Hence, an ultralow-fouling and exceptional infection-resistant coating on devices is urgently needed. Herein, we synthesized mussel-inspired cationic polypeptide (cPep) and mixed-charge polypeptide (mPep) via an N-carboxyanhydride ring opening polymerization method. In the view of the chemical structure, in addition to the catechol group of levodopa, the cationic group of l-lysine (K), and the hydrophobic group of l-phenylalanine (F), the mPep, comparing with cPep, contains the anionic group of l-glutamic acid (E) since the negatively charge amino acid sequence is newly introduced, so as to guarantee its bactericidal ability, low toxicity, and surface self-deposition. Both cPep and mPep coatings are conveniently obtained by a dopamine-assisted codeposition technique. Compared with the cPep coating, the mPep coating has a similar antibacterial activity level (>99%) against methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa. Meanwhile, it is demonstrated that the mPep coating has most effective antibiofilm activity (>3 days) and protein/platelet-resistant ability in vitro, as well as improving hemocompatibility. Furthermore, the mPep-coated silicone catheter induces no inflammatory response and significantly lowers the bacterial cell number with 6 log reduction in a mouse model of infection. Consequently, the rationally designed mPep with a simple coating technique has great potential in combating against medical catheter-related clinical infections.

Nanometer-Scale Distribution of a Lubricant Modifier on Iron Films: A Frequency-Modulation Atomic Force Microscopy Study Combined with a Friction Test

Liquid lubricants used in mechanical applications are low-vapor-pressure hydrocarbons modified with a small quantity of polar compounds. The polar modifiers adsorbed on the surface of sliding solids dominate the friction properties when the sliding surfaces are in close proximity. However, a few methods are available for the characterization of the adsorbed modifiers of a nanometer-scale thickness. In this study, we applied frequency-modulation atomic force microscopy to evaluate the vertical and lateral density distributions of the adsorbed modifier in a real lubricant, namely, poly-α-olefin (PAO) modified with an orthophosphoric acid oleyl ester. The liquid-induced force on the probing tip was mapped on a plane that was perpendicular to the lubricant-iron interface with a force sensitivity on the order of 10 pN. The PAO in the absence of the ester modifier was directly exposed to the film, which produced a few liquid layers parallel to the film surface with layer-to-layer distances of 0.6-0.7 nm. A monomolecular layer of the modifier was intermittently adsorbed with increasing ester concentration in the bulk lubricant, with complete coverage seen at 20 ppm. The C₁₈H₃₅ chains of the oleyl esters fluctuating in the lubricant produced a repulsive force on the tip, which monotonically decayed with the tip-to-surface distance. The dynamic friction coefficient of sliding steel-lubricant-steel interfaces, which was separately determined using a friction tester, was compared with the force map determined on the iron film immersed in the corresponding lubricant. The complete monomolecular layer of the ester modifier on the static lubricant-iron boundary is a requirement for achieving smooth and stable friction at the sliding interface.

Design of Hierarchical Beads for Efficient Label-Free Cell Capture

Defined hierarchical materials promise cell analysis and call for application-driven design in practical use. The further issue is to develop advanced materials and devices for efficient label-free cell capture with minimum instrumentation. Herein, the design of hierarchical beads is reported for efficient label-free cell capture. Silica nanoparticles (size of ≈15 nm) are coated onto silica spheres (size of ≈200 nm) to achieve nanoscale surface roughness, and then the rough silica spheres are combined with microbeads (≈150-1000 µm in diameter) to assemble hierarchical structures. These hierarchical beads are built via electrostatic interaction, covalent bonding, and nanoparticle adherence. Further, after functionalization by hyaluronic acid (HA), the hierarchical beads display desirable surface hydrophilicity, biocompatibility, and chemical/structural stability. Due to the controlled surface topology and chemistry, HA-functionalized hierarchical beads afford high cell capture efficiency up to 98.7% in a facile label-free manner. This work guides the development of label-free cell capture techniques and contributes to the construction of smart interfaces in bio-systems.

Engineering Antifouling Conducting Polymers for Modern Biomedical Applications

Conducting polymers are considered to be favorable electrode materials for implanted biosensors and bioelectronics, because their mechanical properties are similar to those of biological tissues such as nerve and brain tissues. However, one of the primary challenges for implanted devices is to prevent the unwanted protein adhesion or cell binding within biological fluids. The nonspecific adsorption generally causes the malfunction of implanted devices, which is problematic for long-term applications. When responding to the requirements of solving the problems caused by nonspecific adsorption, an increasing number of studies on antifouling conducting polymers has been recently published. In this review, synthetic strategies for preparing antifouling conducting polymers, including direct synthesis of functional monomers and post-functionalization, are introduced. The applications of antifouling conducting polymers in modern biomedical applications are particularly highlighted. This paper presents focuses on the features of antifouling conducting polymers and the challenges of modern biomedical applications.

Atomic insight into hydration shells around facetted nanoparticles

Nanoparticles in solution interact with their surroundings via hydration shells. Although the structure of these shells is used to explain nanoscopic properties, experimental structural insight is still missing. Here we show how to access the hydration shell structures around colloidal nanoparticles in scattering experiments. For this, we synthesize variably functionalized magnetic iron oxide nanoparticle dispersions. Irrespective of the capping agent, we identify three distinct interatomic distances within 2.5 Å from the particle surface which belong to dissociatively and molecularly adsorbed water molecules, based on theoretical predictions. A weaker restructured hydration shell extends up to 15 Å. Our results show that the crystal structure dictates the hydration shell structure. Surprisingly, facets of 7 and 15 nm particles behave like planar surfaces. These findings bridge the large gap between spectroscopic studies on hydrogen bond networks and theoretical advances in solvation science.

Quantitative design rules for protein-resistant surface coatings using machine learning

Preventing biological contamination (biofouling) is key to successful development of novel surface and nanoparticle-based technologies in the manufacturing industry and biomedicine. Protein adsorption is a crucial mediator of the interactions at the bio - nano -materials interface but is not well understood. Although general, empirical rules have been developed to guide the design of protein-resistant surface coatings, they are still largely qualitative. Herein we demonstrate that this knowledge gap can be addressed by using machine learning approaches to extract quantitative relationships between the material surface chemistry and the protein adsorption characteristics. We illustrate how robust linear and non-linear models can be constructed to accurately predict the percentage of protein adsorbed onto these surfaces using lysozyme or fibrinogen as prototype common contaminants. Our computational models could recapitulate the adsorption of proteins on functionalised surfaces in a test set with an r2 of 0.82 and standard error of prediction of 13%. Using the same data set that enabled the development of the Whitesides rules, we discovered an extension to the original rules. We describe a workflow that can be applied to large, consistently obtained data sets covering a broad range of surface functional groups and protein types.