Quantized Reaction Pathways for Solution Synthesis of Colloidal ZnSe Nanostructures: A Connection between Clusters, Nanowires, and Two-Dimensional Nanoplatelets

Near Infrared Light-Emitting Diodes Based on Colloidal InAs/ZnSe Core/Thick-Shell Quantum Dots

Heavy-metal-free III-V colloidal quantum dots (QDs) exhibit promising attributes for application in optoelectronics. Among them, InAs QDs are demonstrating excellent optical performance with respect to absorption and emission in the near-infrared spectral domain. Recently, InAs QDs attained a substantial improvement in photoluminescence quantum yield, achieving 70% at a wavelength of 900 nm through the strategic overgrowth of a thick ZnSe shell atop the InAs core. In the present study, light-emitting diodes (LEDs) based on this type of InAs/ZnSe QDs are fabricated, reaching an external quantum efficiency (EQE) of 13.3%, a turn-on voltage of 1.5V, and a maximum radiance of 12 Wsr-1m-2. Importantly, the LEDs exhibit an extensive emission dynamic range, characterized by a nearly linear correlation between emission intensity and current density, which can be attributed to the efficient passivation provided by the thick ZnSe shell. The obtained results are comparable to state-of-the-art PbS QD LEDs. Furthermore, it should be stressed not only that the fabricated LEDs are fully RoHS-compliant but also that the emitting InAs QDs are prepared via a synthetic route based on a non-pyrophoric, cheap, and commercially available as precursor, namely tris(dimethylamino)-arsine.

Synthesis and Single Crystal X-ray Diffraction Structure of an Indium Arsenide Nanocluster

The discovery of magic-sized clusters as intermediates in the synthesis of colloidal quantum dots has allowed for insight into formation pathways and provided atomically precise molecular platforms for studying the structure and surface chemistry of those materials. The synthesis of monodisperse InAs quantum dots has been developed through the use of indium carboxylate and As(SiMe3)3 as precursors and documented to proceed through the formation of magic-sized intermediates. Herein, we report the synthesis, isolation, and single-crystal X-ray diffraction structure of an InAs nanocluster that is ubiquitous across reports of InAs quantum dot synthesis. The structure, In26As18(O2CR)24(PR'3)3, differs substantially from previously reported semiconductor nanocluster structures even within the III-V family. However, it can be structurally linked to III-V and II-VI cluster structures through the anion sublattice. Further analysis using variable temperature absorbance spectroscopy and support from computation deepen our understanding of the reported structure and InAs nanomaterials as a whole.

Revealing Two Distinct Formation Pathways of 2D Wurtzite-CdSe Nanocrystals Using In Situ X-Ray Scattering

Understanding the mechanism underlying the formation of quantum-sized semiconductor nanocrystals is crucial for controlling their synthesis for a wide array of applications. However, most studies of 2D CdSe nanocrystals have relied predominantly on ex situ analyses, obscuring key intermediate stages and raising fundamental questions regarding their lateral shapes. Herein, the formation pathways of two distinct quantum-sized 2D wurtzite-CdSe nanocrystals - nanoribbons and nanosheets - by employing a comprehensive approach, combining in situ small-angle X-ray scattering techniques with various ex situ characterization methods is studied. Although both nanostructures share the same thickness of ≈1.4 nm, they display contrasting lateral dimensions. The findings reveal the pivotal role of Se precursor reactivity in determining two distinct synthesis pathways. Specifically, highly reactive precursors promote the formation of the nanocluster-lamellar assemblies, leading to the synthesis of 2D nanoribbons with elongated shapes. In contrast, mild precursors produce nanosheets from a tiny seed of 2D nuclei, and the lateral growth is regulated by chloride ions, rather than relying on nanocluster-lamellar assemblies or Cd(halide)2 -alkylamine templates, resulting in 2D nanocrystals with relatively shorter lengths. These findings significantly advance the understanding of the growth mechanism governing quantum-sized 2D semiconductor nanocrystals and offer valuable guidelines for their rational synthesis.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Study of the Mechanism and Increasing Crystallinity in the Self-Templated Growth of Ultrathin PbS Nanosheets

Colloidal 2D semiconductor nanocrystals, the analogue of solid-state quantum wells, have attracted strong interest in material science and physics. Molar quantities of suspended quantum objects with spectrally pure absorption and emission can be synthesized. For the visible region, CdSe nanoplatelets with atomically precise thickness and tailorable emission have been (almost) perfected. For the near-infrared region, PbS nanosheets (NSs) hold strong promise, but the photoluminescence quantum yield is low and many questions on the crystallinity, atomic structure, intriguing rectangular shape, and formation mechanism remain to be answered. Here, we report on a detailed investigation of the PbS NSs prepared with a lead thiocyanate single source precursor. Atomically resolved HAADF-STEM imaging reveals the presence of defects and small cubic domains in the deformed orthorhombic PbS crystal lattice. Moreover, variations in thickness are observed in the NSs, but only in steps of 2 PbS monolayers. To study the reaction mechanism, a synthesis at a lower temperature allowed for the study of reaction intermediates. Specifically, we studied the evolution of pseudo-crystalline templates toward mature, crystalline PbS NSs. We propose a self-induced templating mechanism based on an oleylamine-lead-thiocyanate (OLAM-Pb-SCN) complex with two Pb-SCN units as a building block; the interactions between the long-chain ligands regulate the crystal structure and possibly the lateral dimensions.

Anisotropic Heavy-Metal-Free Semiconductor Nanocrystals: Synthesis, Properties, and Applications

Heavy-metal (Cd, Hg, and Pb)-containing semiconductor nanocrystals (NCs) have been explored widely due to their unique optical and electrical properties. However, the toxicity risks of heavy metals can be a drawback of heavy-metal-containing NCs in some applications. Anisotropic heavy-metal-free semiconductor NCs are desirable replacements and can be realized following the establishment of anisotropic growth mechanisms. These anisotropic heavy-metal-free semiconductor NCs can possess lower toxicity risks, while still exhibiting unique optical and electrical properties originating from both the morphological and compositional anisotropy. As a result, they are promising light-emitting materials in use various applications. In this review, we provide an overview on the syntheses, properties, and applications of anisotropic heavy-metal-free semiconductor NCs. In the first section, we discuss hazards of heavy metals and introduce the typical heavy-metal-containing and heavy-metal-free NCs. In the next section, we discuss anisotropic growth mechanisms, including solution-liquid-solid (SLS), oriented attachment, ripening, templated-assisted growth, and others. We discuss mechanisms leading both to morphological anisotropy and to compositional anisotropy. Examples of morphological anisotropy include growth of nanorods (NRs)/nanowires (NWs), nanotubes, nanoplatelets (NPLs)/nanosheets, nanocubes, and branched structures. Examples of compositional anisotropy, including heterostructures and core/shell structures, are summarized. Third, we provide insights into the properties of anisotropic heavy-metal-free NCs including optical polarization, fast electron transfer, localized surface plasmon resonances (LSPR), and so on, which originate from the NCs' anisotropic morphologies and compositions. Finally, we summarize some applications of anisotropic heavy-metal-free NCs including catalysis, solar cells, photodetectors, lighting-emitting diodes (LEDs), and biological applications. Despite the huge progress on the syntheses and applications of anisotropic heavy-metal-free NCs, some issues still exist in the novel anisotropic heavy-metal-free NCs and the corresponding energy conversion applications. Therefore, we also discuss the challenges of this field and provide possible solutions to tackle these challenges in the future.

2D II-VI Semiconductor Nanoplatelets: From Material Synthesis to Optoelectronic Integration

The field of colloidal synthesis of semiconductors emerged 40 years ago and has reached a certain level of maturity thanks to the use of nanocrystals as phosphors in commercial displays. In particular, II-VI semiconductors based on cadmium, zinc, or mercury chalcogenides can now be synthesized with tailored shapes, composition by alloying, and even as nanocrystal heterostructures. Fifteen years ago, II-VI semiconductor nanoplatelets injected new ideas into this field. Indeed, despite the emergence of other promising semiconductors such as halide perovskites or 2D transition metal dichalcogenides, colloidal II-VI semiconductor nanoplatelets remain among the narrowest room-temperature emitters that can be synthesized over a wide spectral range, and they exhibit good material stability over time. Such nanoplatelets are scientifically and technologically interesting because they exhibit optical features and production advantages at the intersection of those expected from colloidal quantum dots and epitaxial quantum wells. In organic solvents, gram-scale syntheses can produce nanoparticles with the same thicknesses and optical properties without inhomogeneous broadening. In such nanoplatelets, quantum confinement is limited to one dimension, defined at the atomic scale, which allows them to be treated as quantum wells. In this review, we discuss the synthetic developments, spectroscopic properties, and applications of such nanoplatelets. Covering growth mechanisms, we explain how a thorough understanding of nanoplatelet growth has enabled the development of nanoplatelets and heterostructured nanoplatelets with multiple emission colors, spatially localized excitations, narrow emission, and high quantum yields over a wide spectral range. Moreover, nanoplatelets, with their large lateral extension and their thin short axis and low dielectric surroundings, can support one or several electron-hole pairs with large exciton binding energies. Thus, we also discuss how the relaxation processes and lifetime of the carriers and excitons are modified in nanoplatelets compared to both spherical quantum dots and epitaxial quantum wells. Finally, we explore how nanoplatelets, with their strong and narrow emission, can be considered as ideal candidates for pure-color light emitting diodes (LEDs), strong gain media for lasers, or for use in luminescent light concentrators.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Induction of Chirality in Atomically Thin ZnSe and CdSe Nanoplatelets: Strengthening of Circular Dichroism via Different Coordination of Cysteine-Based Ligands on an Ultimate Thin Semiconductor Core

Chiral nanostructures exhibiting different absorption of right- and left-handed circularly polarized light are of rapidly growing interest due to their potential applications in various fields. Here, we have studied the induction of chirality in atomically thin (0.6-1.2 nm thick) ZnSe and CdSe nanoplatelets grown by a colloidal method and coated with L-cysteine and N-acetyl-L-cysteine ligands. We conducted an analysis of the optical and chiroptical properties of atomically thin ZnSe and CdSe nanoplatelets, which was supplemented by a detailed analysis of the composition and coordination of ligands. Different signs of circular dichroism were shown for L-cysteine and N-acetyl-L-cysteine ligands, confirmed by different coordination of these ligands on the basal planes of nanoplatelets. A maximum value of the dissymmetry factor of (2-3) × 10^-3 was found for N-acetyl-L-cysteine ligand in the case of the thinnest nanoplatelets.

Synthesis of Colloidal GaN and AlN Nanocrystals in Biphasic Molten Salt/Organic Solvent Mixtures under High-Pressure Ammonia

Group III nitrides are of great technological importance for electronic devices. These materials have been widely manufactured via high-temperature methods such as physical vapor transport (PVT), chemical vapor deposition (CVD), and hydride vapor phase epitaxy (HVPE). The preparation of group III nitrides by colloidal synthesis methods would provide significant advantages in the form of optical tunability via size and shape control and enable cost reductions through scalable solution-based device integration. Solution syntheses of III-nitride nanocrystals, however, have been scarce, and the quality of the synthesized products has been unsatisfactory for practical use. Here, we report that incorporating a molten salt phase in solution synthesis can provide a viable option for producing crystalline III-nitride nanomaterials. Crystalline GaN and AlN nanomaterials can be grown in a biphasic molten-salt/organic-solvent mixture under an ammonia atmosphere at moderate temperatures (less than 300 °C) and stabilized under ambient conditions by postsynthetic treatment with organic surface ligands. We suggest that microscopic reversibility of monomer attachment, which is essential for crystalline growth, can be achieved in molten salt during the nucleation and the growth of the III-nitride nanocrystals. We also show that increased ammonia pressure increases the size of the GaN nanocrystals produced. This work demonstrates that use of molten salt and high-pressure reactants significantly expands the chemical scope of solution synthesis of inorganic nanomaterials.

Atomically flat semiconductor nanoplatelets for light-emitting applications

The last decade has witnessed extensive breakthroughs and significant progress in atomically flat two-dimensional (2D) semiconductor nanoplatelets (NPLs) in terms of synthesis, growth mechanisms, optical and electronic properties and practical applications. Such NPLs have electronic structures similar to those of quantum wells in which excitons are predominantly confined along the vertical direction, while electrons are free to move in the lateral directions, resulting in unique optical properties, such as extremely narrow emission line width, short photoluminescence (PL) lifetime, high gain coefficient, and giant oscillator strength transition (GOST). These unique optical properties make NPLs favorable for high color purity light-emitting applications, in particular in light-emitting diodes (LEDs), backlights for liquid crystal displays (LCDs) and lasers. This review article first introduces the intrinsic characteristics of 2D semiconductor NPLs with atomic flatness. Subsequently, the approaches and mechanisms for the controlled synthesis of atomically flat NPLs are summarized followed by an insight on recent progress in the mediation of core/shell, core/crown and core/crown@shell structures by selective epitaxial growth of passivation layers on different planes of NPLs. Moreover, an overview of the unique optical properties and the associated light-emitting applications is elaborated. Despite great progress in this research field, there are some issues relating to heavy metal elements such as Cd²⁺ in NPLs, and the ambiguous gain mechanisms of NPLs and others are the main obstacles that prevent NPLs from widespread applications. Therefore, a perspective is included at the end of this review article, in which the current challenges in this stimulating research field are discussed and possible solutions to tackle these challenges are proposed.

Controlled Core/Crown Growth Enables Blue-Emitting Colloidal Nanoplatelets with Efficient and Pure Photoluminescence

Colloidal semiconductor CdSe nanoplatelets (NPLs) feature ultranarrow and anisotropic emissions. However, the optical performance of blue-emitting NPLs is deteriorated by trap states, currently exhibiting tainted emissions and inferior photoluminescence quantum yields (PLQYs). Here, near trap-free blue-emitting NPLs are achieved by the controlled growth of the core/crown. Deep trap states in NPLs can be partially suppressed with the asymmetrical crown growth and are further suppressed with the growth of the small core and the alloyed symmetrical crown, yielding NPLs with pure blue emissions and near-unity PLQYs. Exciton dynamic research based on these NPLs indicates that the trap emission stems from surface traps. Besides, light-emitting diodes exhibiting ultranarrow emission centered around 461 nm with full-width-at-half-maximums down to 11 nm are fabricated using these NPLs.

Tailoring Morphology and Elemental Distribution of Cu-In Nanocrystals via Galvanic Replacement

The compositional and structural diversity of bimetallic nanocrystals (NCs) provides a superior tunability of their physico-chemical properties, making them attractive for a variety of applications, including sensing and catalysis. Nevertheless, the manipulation of the properties-determining features of bimetallic NCs still remains a challenge, especially when moving away from noble metals. In this work, we explore the galvanic replacement reaction (GRR) of In NCs and a copper molecular precursor to obtain Cu-In bimetallic NCs with an unprecedented variety of morphologies and distribution of the two metals. We obtain spherical Cu₁₁In₉ intermetallic and patchy phase-segregated Cu-In NCs, as well as dimer-like Cu-Cu₁₁In₉ and Cu-In NCs. In particular, we find that segregation of the two metals occurs as the GRR progresses with time or with a higher copper precursor concentration. We discover size-dependent reaction kinetics, with the smaller In NCs undergoing a slower transition across the different Cu-In configurations. We compare the obtained results with the bulk Cu-In phase diagram and, interestingly, find that the bigger In NCs stabilize the bulk-like Cu-Cu₁₁In₉ configuration before their complete segregation into Cu-In NCs. Finally, we also prove the utility of the new family of Cu-In NCs as model catalysts to elucidate the impact of the metal elemental distribution on the selectivity of these bimetallics toward the electrochemical CO₂ reduction reaction. Generally, we demonstrate that the GRR is a powerful synthetic approach beyond noble metal-containing bimetallic structures, yet that the current knowledge on this reaction is challenged when oxophilic and poorly miscible metal pairs are used.

Room-Temperature Interconversion Between Ultrathin CdTe Magic-Size Nanowires Induced by Ligand Shell Dynamics

The formation mechanisms of colloidal magic-size semiconductor nanostructures have remained obscure. Herein, we report the room temperature synthesis of three species of ultrathin CdTe magic-size nanowires (MSNWs) with diameters of 0.7 ± 0.1 nm, 0.9 ± 0.2 nm, and 1.1 ± 0.2 nm, and lowest energy exciton transitions at 373, 418, and 450 nm, respectively. The MSNWs are obtained from Cd(oleate)₂ and TOP-Te, provided diphenylphosphine and a primary alkylamine (RNH₂) are present at sufficiently high concentrations, and exhibit sequential, discontinuous growth. The population of each MSNW species is entirely determined by the RNH₂ concentration [RNH₂] so that single species are only obtained at specific concentrations, while mixtures are obtained at concentrations intermediate between the specific ones. Moreover, the MSNWs remain responsive to [RNH₂], interconverting from thinner to thicker upon [RNH₂] decrease and from thicker to thinner upon [RNH₂] increase. Our results allow us to propose a mechanism for the formation and interconversion of CdTe MSNWs and demonstrate that primary alkylamines play crucial roles in all four elementary kinetic steps (viz., monomer formation, nucleation, growth in length, and interconversion between species), thus being the decisive element in the creation of a reaction pathway that leads exclusively to CdTe MSNWs. The insights provided by our work thus contribute toward unravelling the mechanisms behind the formation of shape-controlled and atomically precise magic-size semiconductor nanostructures.

Highly Stable 3D Supercuboids to 2D ZnSe Nanosheets: Formation for a High-Efficiency Catalysis System

Assembling into desired and higher-ordered superstructures makes nanocrystals superior candidates in a wide range of applications. Herein, we report a facile but robust colloidal chemistry method to obtain three-dimensional (3D) supercuboids from two-dimensional (2D) ZnSe nanosheets. It is well-defined that the formation mechanism of the supercuboids is based on the interaction among ligands on the ZnSe nanosheets. The highly stable supercuboids are composed of nanosheets with thickness of approximately ∼1.4 nm, and the spacing between two nanosheets in the supercuboid is revealed as ∼1.2 nm. Importantly, 2D nanosheets are readily regained by an exfoliation process of 3D supercuboids in a high-temperature solvothermal process. Furthermore, the Au@ZnSe heteronanosheets could be obtained by Au nanoparticles (NPs) decorated on 2D nanosheets. As a proof-of-concept application, the ZnSe nanosheets are applied in the catalysis of the aldol condensation reaction, which shows the high isolated yield of chalcone up to 80%.

ZnSe Nanorods-CsSnCl3 Perovskite Heterojunction Composite for Photocatalytic CO2 Reduction

Utilizing sunlight to convert CO₂ into chemical fuels could simultaneously address the greenhouse effect and fossil fuel crisis. ZnSe nanocrystals are promising candidates for photocatalysis because of their low toxicity and excellent photoelectric properties. However, pristine ZnSe generally has low catalytic activities due to serious charge recombination and the lack of efficient catalytic sites for CO₂ reduction. Herein, a ZnSe nanorods-CsSnCl₃ perovskite (ZnSe-CsSnCl₃) type II heterojunction composite is designed and prepared for photocatalytic CO₂ reduction. The ZnSe-CsSnCl₃ type II heterojunction composite exhibits enhanced photocatalytic activity for CO₂ reduction with respect to pristine ZnSe nanorods. The experimental characterizations and theoretical calculations reveal that the efficient charge separation and lowered free energy of CO₂ reduction facilitate the CO₂ conversion on the ZnSe-CsSnCl₃ heterojunction composite. This work presents a type II heterojunction composite photocatalyst based on ecofriendly metal chalcogenides and metal halide perovskites. Our study has also promoted the understanding of the CO₂ reduction mechanisms on perovskite nanocrystals, which could be valuable for the development of metal halide perovskite photocatalysts.

Magic-Size Semiconductor Nanostructures: Where Does the Magic Come from?

The quest for atomically precise synthesis of colloidal semiconductor nanostructures has attracted increasing attention in recent years and remains a formidable challenge. Nevertheless, atomically precise clusters of semiconductors, known as magic-size clusters (MSCs), are readily accessible. Ultrathin one-dimensional nanowires and two-dimensional nanoplatelets and nanosheets can also be categorized as magic-size nanocrystals (MSNCs). Further, the magic-size growth regime has been recently extended into the size range of colloidal QDs (up to 3.5 nm). Nevertheless, the underlying reasons for the enhanced stability of magic-size nanostructures and their formation mechanisms remain obscure. In this Perspective, we address these intriguing questions by critically analyzing the currently available knowledge on the formation and stability of both MSCs and MSNCs (0D, 1D, and 2D). We conclude that research on magic-size colloidal nanostructures is still in its infancy, and many fundamental questions remain unanswered. Nonetheless, we identify several correlations between the formation of MSCs and 0D, 1D and 2D MSNSs. From our analysis, it appears that the "magic" originates from the complexity of a dynamic and multivariate system running under reaction control. Under conditions that impose a prohibitively high energy barrier for classical nucleation and growth, the reaction proceeds through a complex and dynamic potential landscape, searching for the pathway with the lowest energy barrier, thereby sequentially forming metastable products as it jumps from one local minimum to the next until it eventually becomes trapped into a minimum that is too deep with respect to the available thermal energy. The intricacies of this complex interplay between several synergistic and antagonistic processes are, however, not yet understood and should be further investigated by carefully designed experiments combining multiple complementary in situ characterization techniques.

Ripening of two-dimensional colloidal CdSe nanocrystals into zero-dimensional nanodots

Understanding the ripening of two-dimensional (2D) colloidal nanocrystals (NCs) is important for the controllable synthesis of NCs with desired morphology and properties. In this study, we systematically investigate the ripening behavior of the 2D CdSe NCs in the presence of a short-chain acetate ligand and a long-chain oleate ligand. We find that a low acetate/oleate ratio, a low Cd/Se ratio, and a low monomer concentration help in the ripening of the 2D NCs to form 0D NCs. Moreover, a porous nanosheet intermediate is observed when there is a high Cd/Se ratio, whereas in the case of a low Cd/Se ratio, the ripening starts from the edge of the nanosheets, resulting in a saw-like nanosheet intermediate. These findings provide necessary insights into the growth and ripening of 2D CdSe NCs that allow for the controlled synthesis of 0D and 2D CdSe NCs.

Understanding Discrete Growth in Semiconductor Nanocrystals: Nanoplatelets and Magic-Sized Clusters

ConspectusSemiconductor nanocrystals (NCs) fluoresce with a color that strongly depends on their size and shape. Thus, to obtain homogeneous optical properties, researchers have strived to synthesize particles that are uniform. However, because NCs typically grow through continuous, incremental addition of material, slight differences in the growth process between individual crystallites yield statistical distributions in size and shape, leading to inhomogeneities in their optical characteristics. Much work has focused on improving synthetic protocols to control these distributions and enhance performance. Interestingly, during these efforts, several syntheses were discovered that exhibit a different type of growth process. The NCs jump from one discrete size to the next. Through purification methods, one of these sizes can then be isolated, providing a different approach to uniform NCs. Unfortunately, the fundamental mechanism behind such discrete growth and how it differs from the conventional continuous process have remained poorly understood.Discrete growth has been observed in two major classes of NCs: semiconductor nanoplatelets (NPLs) and magic-sized clusters (MSCs). NPLs are quasi-two-dimensional crystallites that exhibit a precise thickness of only a few atomic layers but much larger lateral dimensions. During growth, NPLs slowly appear with an increasing number of monolayers. By halting this process at a specific time, NPLs with a desired thickness can then be isolated (e.g., four monolayers). Because the optical properties are primarily governed by this thickness, which is uniform, NPLs exhibit improved optical properties such as narrower fluorescence line widths.While NPLs have highly anisotropic shapes and show discrete growth only in one dimension (thickness), MSCs are isotropic particles. The name "magic" arose because a specific set of NC sizes appear during synthesis. They have been believed to represent special atomic arrangements that possess enhanced structural stability. Historically, they were very small, hence molecular-scale "clusters." Isolation of one of the MSC sizes can then, in principle, provide a uniform sample of NCs. More recently, MSC growth has been extended to larger sizes, beyond what is commonly considered to be the "cluster" regime, challenging the conventional explanation for these materials.This Account summarizes recent work by our group to understand the mechanism that governs discrete growth in semiconductor NCs. We begin by describing the synthesis of NPLs. Next, we discuss the mechanism behind the highly anisotropic shape of NPLs. We build on this by examining the ripening process in NPLs. We show that NPLs slowly appear with increasing thickness, counterintuitively through lateral growth. Then, we turn to the synthesis of MSCs, in particular focusing on their growth mechanism. Our findings indicate a strong connection between NPLs and MSCs. Finally, we review several remaining challenges for the growth of NPLs and MSCs and give a brief outlook on the future of discrete growth. By understanding the underlying process, we believe that it can be exploited more broadly, potentially moving us toward more uniform nanomaterials.

An in situ and real time study of the formation of CdSe NCs

Magic Size Clusters (MSCs) have been identified in the last few years as intermediates in the synthesis of nanocrystals (NCs), and ever since there has been increased interest in understanding their exact role in the NC synthesis. Many studies have been focused on understanding the influence of precursors or ligands on the stability of MSCs and on whether the presence of MSCs influences the reaction pathway. However, their kinetic nature calls for an in situ temporal evolution study of the reaction, from the first seconds until the formation of regular nanocrystals, in order to unravel the role of MSCs in the formation of NCs. We have studied the synthesis of CdSe nanocrystals (NCs) in a continuous-flow reactor with in situ optical and small angle X-ray scattering characterization (SAXS). Our results show that MSCs are always formed, regardless the temperature, as necessary intermediates in the formation of CdSe NCs, and that their accumulation in solution depends only on the reaction time. These results explain why MSCs were, in some cases, not observed in some previous studies.

Let There Be Order, in Films of Colloidal CdSe 2D Nanocrystals

Progression from random orientation of 2D CdSe nanoplatelets to ordered close-packed thin films enables us to exploit the in-plane dipole moment of the band-edge transition on a macroscopic scale and gain control over the direction of charge and energy transport within the film. Momper et al. show how this can be achieved by tuning the solvent evaporation rate during deposition. They are able to switch from thermodynamically to kinetically controlled conditions for the film formation, resulting in ordered films with either face-down or edge-up alignment of the 2D nanoplatelets.