New antifouling platform characterized by single-molecule imaging

Current status, challenges and prospects of antifouling materials for oncology applications

Targeted therapy has become crucial to modern translational science, offering a remedy to conventional drug delivery challenges. Conventional drug delivery systems encountered challenges related to solubility, prolonged release, and inadequate drug penetration at the target region, such as a tumor. Several formulations, such as liposomes, polymers, and dendrimers, have been successful in advancing to clinical trials with the goal of improving the drug's pharmacokinetics and biodistribution. Various stealth coatings, including hydrophilic polymers such as PEG, chitosan, and polyacrylamides, can form a protective layer over nanoparticles, preventing aggregation, opsonization, and immune system detection. As a result, they are classified under the Generally Recognized as Safe (GRAS) category. Serum, a biological sample, has a complex composition. Non-specific adsorption of chemicals onto an electrode can lead to fouling, impacting the sensitivity and accuracy of focused diagnostics and therapies. Various anti-fouling materials and procedures have been developed to minimize the impact of fouling on specific diagnoses and therapies, leading to significant advancements in recent decades. This study provides a detailed analysis of current methodologies using surface modifications that leverage the antifouling properties of polymers, peptides, proteins, and cell membranes for advanced targeted diagnostics and therapy in cancer treatment. In conclusion, we examine the significant obstacles encountered by present technologies and the possible avenues for future study and development.

Fluorinated-Triazole-Modified ZnO and Its Application in Marine Antifouling

The accumulation of marine biological growth has irreversible negative effects on shipping and coastal fisheries. In this paper, a new antibacterial nanofiller—triazole fluoroaromatic hydrocarbon−modified nano−zinc oxide (ZnO−APTES−TRF)—was prepared by a Cu(I)−catalyzed azide–alkyne click chemical reaction. The modification of nano−ZnO with triazole ring fluoroaromatic hydrocarbons were testified by FT−IR, XPS, and EDS. The grafting rate of ZnO−APTES−TRF can reach 32.38%, which was verified by the TGA test. The ZnO−APTES−TRF was mixed with zinc acrylate resin to produce a low surface energy antifouling coating with a surface water contact angle of 106°. The bactericidal rate of ZnO−APTES−TRF against Escherichia coli, Staphylococcus aureus, and Pseudoalteromonas sp. can reach more than 98% due to the synergistic effect of triazole and fluorine. The 120−day marine experiment shows that the low surface energy antifouling coating of ZnO−APTES−TRF/ZA is expected to be widely used in the field of marine antifouling.

Preparation of a Novel Type of Zwitterionic Polymer and the Antifouling PDMS Coating

As awareness of environmental protection increases, environmentally friendly coatings have been receiving great interest. Zwitterionic polymers are considered promising candidates due to their biocompatibility and excellent antifouling properties. In this paper, a type of polypeptoid containing zwitterions on the side chain was synthesized via ring-opening polymerization (ROP) and post-modification. This obtained polypeptoid was subsequently grafted onto the surface of polydimethylsiloxane (PDMS) via plasma and UV-induced surface polymerization. Surface morphology and protein adsorption tests of the resulting coating were systematically carried out. The results show that the modified coating has excellent antifouling properties and thus has great potential for environmentally friendly coating applications.

Self-Assembling Nucleic Acid Nanostructures Functionalized with Aptamers

Researchers have worked for many decades to master the rules of biomolecular design that would allow artificial biopolymer complexes to self-assemble and function similarly to the diverse biochemical constructs displayed in natural biological systems. The rules of nucleic acid assembly (dominated by Watson-Crick base-pairing) have been less difficult to understand and manipulate than the more complicated rules of protein folding. Therefore, nucleic acid nanotechnology has advanced more quickly than de novo protein design, and recent years have seen amazing progress in DNA and RNA design. By combining structural motifs with aptamers that act as affinity handles and add powerful molecular recognition capabilities, nucleic acid-based self-assemblies represent a diverse toolbox for use by bioengineers to create molecules with potentially revolutionary biological activities. In this review, we focus on the development of self-assembling nucleic acid nanostructures that are functionalized with nucleic acid aptamers and their great potential in wide ranging application areas.

Bio-instructive materials on-demand - combinatorial chemistry of peptoids, foldamers, and beyond

Combinatorial chemistry allows for the rapid synthesis of large compound libraries for high throughput screenings in biology, medicinal chemistry, or materials science. Especially compounds from a highly modular design are interesting for the proper investigation of structure-to-activity relationships. Permutations of building blocks result in many similar but unique compounds. The influence of certain structural features on the entire structure can then be monitored and serve as a starting point for the rational design of potent molecules for various applications. Peptoids, a highly diverse class of bioinspired oligomers, suit perfectly for combinatorial chemistry. Their straightforward synthesis on a solid support using repetitive reaction steps ensures easy handling and high throughput. Applying this modular approach, peptoids are readily accessible, and their interchangeable side-chains allow for various structures. Thus, peptoids can easily be tuned in their solubility, their spatial structure, and, consequently, their applicability in various fields of research. Since their discovery, peptoids have been applied as antimicrobial agents, artificial membranes, molecular transporters, and much more. Studying their three-dimensional structure, various foldamers with fascinating, unique properties were discovered. This non-comprehensive review will state the most interesting discoveries made over the past years and arouse curiosity about what may come.

Lubricin-Inspired Loop Zwitterionic Peptide for Fabrication of Superior Antifouling Surfaces

Biofouling represents great challenges in many applications, and zwitterionic peptides have been a promising candidate due to their biocompatibility and excellent antifouling performance. Inspired by lubricin, we designed a loop-like zwitterionic peptide and investigated the effect of conformation (linear or loop) on the antifouling properties using a combination of surface plasma resonance (SPR), surface force apparatus (SFA), and all atomistic molecular dynamics (MD) simulation techniques. Our results demonstrate that the loop-like zwitterionic peptides perform better in resisting the adsorption of proteins and bacteria. SFA measurements show that the loop-like peptides reduce the adhesion between the modified surface and the modeling foulant lysozyme. All atomistic MD simulations reveal that the loop-like zwitterionic peptides are more rigid than the linear-like zwitterionic peptides and avoid the penetration of the terminus into the foulants, which lower the interaction between the zwitterionic peptides and foulants. Besides, the loop-like zwitterionic peptides avoid the aggregation of the chains and bind more water, improving the hydrophilicity and antifouling performance. Altogether, this study provides a more comprehensive understanding of the conformation effect of zwitterionic peptides on their antifouling properties, which may contribute to designing novel antifouling materials in various biomedical applications.

Protein adsorption measurements on low fouling and ultralow fouling surfaces: A critical comparison of surface characterization techniques

Ultralow protein fouling behavior is a common target for new high-performance materials. Ultralow fouling is often defined based on the amount of irreversibly adsorbed protein (< 5 ng cm^-2) measured by a surface ensemble averaging method. However, protein adsorption at solid interfaces is a dynamic process involving multiple steps, which may include adsorption, desorption, and irreversible protein denaturation. In order to better optimize the performance of antifouling surfaces, it is imperative to fully understand how proteins interact with surfaces, including kinetics of adsorption and desorption, conformation, stability, and amount of adsorbed proteins. Defining ultralow fouling surfaces based on a measurement at or near the limit of detection of a surface-averaged measurement may not capture all of this behavior. Single-molecule microscopy techniques can resolve individual protein-surface interactions with high temporal and spatial resolution. This information can be used to tune the properties of surfaces to better resist protein adsorption. In this work, we demonstrate how combining surface plasmon resonance, X-ray photoelectron spectroscopy, atomic force microscopy, and single-molecule localization microscopy provides a more complete picture of protein adsorption on low fouling and ultralow fouling polyelectrolyte multilayer and polymer brush surfaces, over different regimes of protein concentration. In this case, comparing the surfaces using surface plasmon resonance alone is insufficient to rank their resistance to protein adsorption. Our results suggest a revision of the accepted definition of ultralow fouling surfaces is timely: with the advent of time-resolved studies of protein adsorption kinetics at the single-molecule level, it is neither necessary nor sufficient to rely on a surface averaging techniques to qualify ultralow fouling surfaces. Since protein adsorption is a dynamic process, understanding how surface properties affect the kinetics of protein adsorption will enable the design of future generations of advanced antifouling materials. STATEMENT OF SIGNIFICANCE: The design of ultralow fouling surfaces is often optimized based on a single surface-averaging technique measuring the amount of irreversibly adsorbed protein. This work provides a critical comparison of alternative techniques for evaluating protein adsorption on low fouling and ultralow fouling surfaces, and demonstrates how additional information about the dynamics of protein-surface interactions at the interface can be obtained by application of single-molecule microscopy. This approach could be used to better elucidate mechanisms of protein resistance and design principles for advanced ultralow fouling materials.

Atomistic Study of Zwitterionic Peptoid Antifouling Brushes

Using molecular dynamics (MD) simulations, we study the molecular behavior and hydration properties of a set of zwitterionic "peptoid" brushes, grafted on a rutile surface, that has been previously reported to exhibit excellent resistance against protein adsorption and cell attachment. Peptoids are novel poly( N-substituted glycine) peptide mimics with the side chains attached to amide nitrogens. They constitute a unique model polymer system because hundreds of side chains have been demonstrated, and the exact chain length and sequence order of the residues/monomers may be specified in experiments. In this report, we vary the brush grafting density as well as the side chain/polymer molecular volume. We include in our study polysarcosine as an uncharged comparison with a small polymer chain cross-section. Sarcosine is the simplest peptoid residue with only a nominally hydrophobic methyl group as side chain, but is also reported to exhibit high antifouling performance. Overall, we show in detail how molecular volume and hydration effects are intertwined in a zwitterionic polymer brush. For example, the zwitterionic design significantly promotes extended chain conformations and could actually lower the overall electrostatic potential. Some properties promoted by the balanced charges, such as chain flexibility and hydration, increase more prominently at "low" to "intermediate" chain densities. These and other observations should provide insight on the molecular behavior of peptoids and inform the design of zwitterionic antifouling polymer brushes.

Anti-biofouling and antibacterial surfaces via a multicomponent coating deposited from an up-scalable atmospheric-pressure plasma-assisted CVD process

Prevention of bacterial adhesion and biofilm formation on the surfaces of materials is a topic of major medical and societal importance. In this study, an up-scalable atmospheric-pressure plasma assisted deposition method is introduced to produce a multicomponent coating towards the elaboration of antibacterial and anti-biofilm surfaces. Interestingly, from a single catechol-based monomer, high deposition rates of highly chemically reactive functional thin films bearing catechol as well as quinone groups are achieved. The catechol-bearing thin film allows the in situ silver nanoparticle formation, assessed by scanning electron microscopy and EDX, whilst the enriched-quinone thin film is exploited for immobilizing dispersine B, an enzyme. In vitro functional assays demonstrated the dual antibacterial and anti-biofouling resistance properties of the coatings due to the antibacterial effect of silver and the fouling resistance of grafted dispersine B, respectively. Surfaces coated only with silver provide an antibacterial effect but fail to inhibit bacterial attachment, highlighting the usefulness of such dual-action surfaces. The approach presented here provides a simple and effective chemical pathway to construct powerful antibacterial surfaces for various industrial applications.

Mixed Self-Assembled Aptamer and Newly Designed Zwitterionic Peptide as Antifouling Biosensing Interface for Electrochemical Detection of alpha-Fetoprotein

A sensitive and low-fouling aptasensor for alpha-fetoprotein (AFP) was developed based on mixed self-assembled aptamers and newly designed zwitterionic peptides, where densely immobilized peptides formed an antifouling layer to resist nonspecific protein adsorption, and sparsely attached aptamers acted as the recognizing layer to achieve target binding. The obtained biosensing interface responded to the target AFP with a strikingly selective and sensitive manner, exhibited excellent protein-resistant performance even in complex human serum solution, and showed promising feasibility for the quantitative analysis of AFP in real human serum samples.

Surface functionalization and dynamics of polymeric cell culture substrates

The promise of growing tissues to replace or improve the function of failing ones, a practice often referred to as regenerative medicine, has been driven in recent years by the development of stem cells and cell lines. Stem cells are typically cultured outside the body to increase cell number or differentiate the cells into mature cell types. In order to maximize the regenerative potential of these cells, there is a need to understand cell-material interactions that direct cell behavior and cell-material dynamics. Most synthetic surfaces used for growth and differentiation of cells in the lab are impractical and cost prohibitive in clinical labs. This review focuses on the modification of low cost polymer substrates that are already widely used for cell culture so that they may be used to control and understand cell-material interactions. In addition, we discuss the ability of cells to exert dynamic control over the microenvironment leading to a more complex, less controlled surface.

Biomedical and Clinical Importance of Mussel-Inspired Polymers and Materials

The substance secreted by mussels, also known as nature's glue, is a type of liquid protein that hardens rapidly into a solid water-resistant adhesive material. While in seawater or saline conditions, mussels can adhere to all types of surfaces, sustaining its bonds via mussel adhesive proteins (MAPs), a group of proteins containing 3,4-dihydroxyphenylalanine (DOPA) and catecholic amino acid. Several aspects of this adhesion process have inspired the development of various types of synthetic materials for biomedical applications. Further, there is an urgent need to utilize biologically inspired strategies to develop new biocompatible materials for medical applications. Consequently, many researchers have recently reported bio-inspired techniques and materials that show results similar to or better than those shown by MAPs for a range of medical applications. However, the susceptibility to oxidation of 3,4-dihydroxyphenylalanine poses major challenges with regard to the practical translation of mussel adhesion. In this review, various strategies are discussed to provide an option for DOPA/metal ion chelation and to compensate for the limitations imposed by facile 3,4-dihydroxyphenylalanine autoxidation. We discuss the anti-proliferative, anti-inflammatory, anti-microbial activity, and adhesive behaviors of mussel bio-products and mussel-inspired materials (MIMs) that make them attractive for synthetic adaptation. The development of biologically inspired adhesive interfaces, bioactive mussel products, MIMs, and arising areas of research leading to biomedical applications are considered in this review.

Sequence Programmable Peptoid Polymers for Diverse Materials Applications

Polymer sequence programmability is required for the diverse structures and complex properties that are achieved by native biological polymers, but efforts towards controlling the sequence of synthetic polymers are, by comparison, still in their infancy. Traditional polymers provide robust and chemically diverse materials, but synthetic control over their monomer sequences is limited. The modular and step-wise synthesis of peptoid polymers, on the other hand, allows for precise control over the monomer sequences, affording opportunities for these chains to fold into well-defined nanostructures. Hundreds of different side chains have been incorporated into peptoid polymers using efficient reaction chemistry, allowing for a seemingly infinite variety of possible synthetically accessible polymer sequences. Combinatorial discovery techniques have allowed the identification of functional polymers within large libraries of peptoids, and newly developed theoretical modeling tools specifically adapted for peptoids enable the future design of polymers with desired functions. Work towards controlling the three-dimensional structure of peptoids, from the conformation of the amide bond to the formation of protein-like tertiary structure, has and will continue to enable the construction of tunable and innovative nanomaterials that bridge the gap between natural and synthetic polymers.

Fabrication of binary components based on a poly(ionic liquid) through “grafting” and “clicking” and their synergistic antifouling activity

Grafting a binary component mPEG-poly(ionic liquid) via “grafting” and “clicking” reactions for antifouling applications.

Grafting zwitterionic polymer brushes via electrochemical surface-initiated atomic-transfer radical polymerization for anti-fouling applications

Zwitterionic polymer brushes based on sulfobetaine vinylimidazole (pSBVI) were successfully grafted to silicon substrates by electrochemical surface-initiated atomic-transfer radical polymerization (e-SIATRP), and exhibited excellent anti-fouling activities because of the presence of the two bactericidal functional groups, imidazolium and sulfonate. Various characterization techniques, including atomic force microscopy, X-ray photoelectron spectroscopy and use of a quartz crystal microbalance, were employed to characterize the polymer brush-modified silicon substrates. Subsequently, the anti-bacterial and anti-biofouling activities of the polymer brush substrates were evaluated. The experimental results showed that the pSBVI effectively resisted the adhesion of Nannochloropsis maritima and showed good anti-bacterial activity against Escherichia coli. In addition, in comparison with poly(vinylimidazole) brush-modified substrates and the bare substrate, the pSBVI-based materials also exhibited excellent anti-adsorption performance against both bovine serum albumin and lysozyme.