Colorimetric peroxidase mimetic assay for uranyl detection in sea water

The roles of templates consisting of amino acids in the synthesis and application of gold nanoclusters

Gold nanoclusters (AuNCs) with low toxicity, high photostability, and facile synthesis have attracted great attention. The ligand is of great significance in stabilizing AuNCs and regulating their properties. Ligands consisting of amino acids (proteins and peptides) are an ideal template for synthesizing applicative AuNCs due to their inherent bioactivity, biocompatibility, and accessibility. In this review, we summarize the correlation of the template consisting of amino acids with the properties of AuNCs by analyzing different peptide sequences. The selection of amino acids can regulate the fluorescence excitation/emission and intensity, size, cell uptake, and light absorption. By analyzing the role played by AuNCs stabilized by proteins and peptides in the application, universal rules and detailed performances of sensors, antibacterial agents, therapeutic reagents, and light absorbers are reviewed. This review can guide the template design and application of AuNCs when selecting proteins and peptides as ligands.

Fluorescent Eu-MOF@nanocellulose-based nanopaper for rapid and sensitive detection of uranium (Ⅵ)

Radioactive uranium leaks into natural water bodies mainly in the form of uranyl ions (UO22+), posing ecological and human health risks. Fluorescent europium-based metal-organic frameworks (Eu-MOFs) have been demonstrated to be effective fluorescent sensors for UO22+, but the large size, powder state and poor dispersity limit their further application. In this work, fluorescent Eu-MOFs were in-situ grown on TEMPO-oxidized cellulose nanofibers (TOCNFs), which is the first time that spherical Eu-MOF crystals with sizes below 10 nm were prepared. Fluorescence spectral analysis revealed a nine-fold increase in the fluorescence intensity of TOCNF@Eu-MOF compared to Eu-MOF. The nanocomposites achieved rapid and sensitive fluorescence quenching to UO22+ through the "antenna effect" and unsaturated Lewis basic sites on the ligands binding with UO22+. Moreover, TOCNF@Eu-MOF demonstrated excellent selectivity and anti-interference for UO22+ detection. For the nanopaper-based sensor made from TOCNF@Eu-MOF, the Stern-Volmer quenching constant (KSV) was calculated as 8.21 × 104 M-1, and the lowest limit of detection (LOD) was 6.6 × 10-7 M, significantly lower than the 1.32 × 10-6 M of Eu-MOFs. In addition, the nanopaper exhibited good fluorescence stability and cyclic detection performance, enabling the rapid and convenient detection of UO22+ in the aqueous phase within 30 s by simple dipping.

Simultaneous detection and separation of uranium based on a fluorescent amidoxime-functionalized covalent organic polymer

To ensure the long-term sustainable development of nuclear energy as well as the prevention and control of uranium pollution, new materials that can simultaneously detect and separate uranium are still urgently needed. Herein, a new fluorescent covalent organic polymer (COP), namely HT-COP-AO, was synthesized andemployed as both the fluorescent probe and absorbent for simultaneous uranium detection and separationconsidering its excellent fluorescence property and strong uranium coordination ability. The results showed that the fluorescence of HT-COP-AO was quickly quenched by uranium within 2 min, and the limit of detection was 0.23 µM (3σ/K). Further studies implied that uranium was coordinated with the amidoxime groups of HT-COP-AO through U-N and O = U = O bonds, which resulted in electron transfer from uranium to HT-COP-AO and quenching the fluorescence of HT-COP-AO consequently. Meanwhile, HT-COP-AO exhibited excellent absorption ability towards uranium, and the maximum absorption capacity (q_max = 401.3 mg/g) was higher than most reported amidoxime modified materials. The HT-COP-AO also showed high selectivity for both uranium detection and separation which makes it a great promising for uranium monitoring in real water samples.

DNAzyme-Derived Aptamer Reversely Regulates the Two Types of Enzymatic Activities of Covalent-Organic Frameworks for the Colorimetric Analysis of Uranium

Nanozymes are nanomaterials with enzyme-mimetic activity. It is known that DNA can interact with various nanozymes in different ways, enhancing or inhibiting the activity of nanozymes, which can be used to develop various biosensors. In this work, we synthesized a photosensitive covalent-organic framework (Tph-BT) as a nanozyme, and its oxidase and peroxidase activities could be reversely regulated by surface modification of single-stranded DNA (ssDNA) for the colorimetric detection of UO₂²⁺. Tph-BT exhibits excellent oxidase activity and weak peroxidase activity, and it is surprising to find that the UO₂²⁺-specific DNA aptamer can significantly inhibit the oxidase activity while greatly enhancing the peroxidase activity. The present UO₂²⁺ interacts with the DNA aptamer to form secondary structures and detaches from the surface of Tph-BT, thereby restoring the enzymatic activity of Tph-BT. Based on the reversed regulation effects of the DNA aptamer on the two types of enzymatic activities of Tph-BT, a novel "off-on" and "on-off" sensing platform can be constructed for the colorimetric analysis of UO₂²⁺. This research demonstrates that ssDNA can effectively regulate the different types of enzymatic activities of single COFs and achieve the sensitive and selective colorimetric analysis of radionuclides by the naked eye.

Visible Light-Responsive Sulfone-Based Covalent Organic Framework as Metal-Free Nanoenzyme for Visual Colorimetric Determination of Uranium

Covalent organic framework (COF) has been attracting considerable attention as a novel crystalline material owing to its extended π-electron conjugation and excellent spectral behavior. In this study, we present an imine-linked two-dimensional (2D) crystalline sulfone-based covalent organic framework (TAS-COF) synthesized by 2,4,6-triformylphloroglucinol (Tp) and 3,7-diaminodibenzo[b,d]thiophene (DAS) via a Schiff base condensation reaction. The benzothiophene sulfone endows the as-synthesized TAS-COF with excellent oxidase-like activity under visible light irradiation, ascribed to the generation of superoxide radicals (O2•−) by photo-generated electron transfer. TAS-COF can efficiently oxidase the colorless substrate 3,3′,5,5′-tetramethylbenzydine (TMB) into blue oxidized TMB (oxTMB) when exposed to visible light, and the presence of uranium (UO22+) leads to clear color fading due to the coordination between the imine of oxTMB and UO22+. A colorimetric strategy is thus developed for UO22+ determination with a detection limit of 0.07 μmol L−1. Moreover, a paper-based visual sensing platform is also constructed to offer simple and fast UO22+ content evaluation in water samples. The present study not only provides a promising strategy to prepare visible light-triggered COF-based metal-free nanoenzymes but also extends the applications of COF material in radionuclide detection.

An inner-filter-effect based ratiometric fluorescent sensor for the detection of uranyl ions in real samples

In this work, a ratiometric fluorescence system was designed for the detection of trace UO₂²⁺ in water based on the inner filter effect (IFE) between gold nanoparticles (AuNPs) and gold nanoclusters (AuNCs). IFE-induced fluorescence quenching was achieved due to the enhanced complementary overlap between the absorption spectra of AuNPs and the emission spectrum of AuNCs after the addition of UO₂²⁺. Blue carbon dots (B-CDs) were added to serve as reference fluorophores to expand the color tonality and make human eye recognition easier. The ratiometric fluorescent sensor demonstrated a unique fluorescence color change from red to blue when different doses of UO₂²⁺ were added, with a detection limit of 8.4 nM. Furthermore, the ratiometric fluorescent sensor was effectively used for UO₂²⁺ determination in real-world water samples, with acceptable recoveries.

DNAzyme recognition triggered cascade signal amplification for rapid and highly sensitive visual detection of uranyl ions

A 40 min rapid and highly sensitive assay for visualized detection of UO22+ in water samples is reported. A dynamic range 1~50 nM and a LOD of 0.48 nM were obtained. Concentrations as low as 5 nM UO22+ could be distinguished by the naked eye.

A peroxidase-like activity-based colorimetric sensor array of noble metal nanozymes to discriminate heavy metal ions

Heavy metal ions (HMIs), including Cu²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺ from the environment pose a threat to human beings and can cause a series of life-threatening diseases. Therefore, colorimetric sensors with convenience and flexibility for HMI discrimination are still required. To provide a solution, a peroxidase-like activity-based colorimetric sensor array of citrate-capped noble metal nanozymes (osmium, platinum, and gold) has been fabricated. Some studies reported that some HMIs could interact with the noble metal nanozymes leading to a change in their peroxidase-like activity. This phenomenon was confirmed in our work. Based on this principle, different concentrations of HMIs (Cu²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺) were discriminated. Moreover, their practical application has been tested by discriminating HMIs in tap water and SiYu lake water. What is more, as an example of the validity of our method to quantify HMIs at nanomolar concentrations, the LOD of Hg²⁺ was presented. To sum up, our study not only demonstrates the differentiation ability of this nanozyme sensor array but also gives hints for using nanozyme sensor arrays for further applications.

Colorimetric Detection of Organophosphate Pesticides Based on Acetylcholinesterase and Cysteamine Capped Gold Nanoparticles as Nanozyme

Organophosphates (OPs) are neurotoxic agents also used as pesticides that can permanently block the active site of the acetylcholinesterase (AChE). A robust and sensitive detection system of OPs utilising the enzyme mimic potential of the cysteamine capped gold nanoparticles (C-AuNPs) was developed. The detection assay was performed by stepwise addition of AChE, parathion ethyl (PE)-a candidate OP, acetylcholine chloride (ACh), C-AuNPs, and 3, 3′, 5, 5′-tetramethylbenzidine (TMB) in the buffer solution. The whole sensing protocol completes in 30–40 min, including both incubations. The Transmission Electron Microscopy (TEM) results indicated that the NPs are spherical and have an average size of 13.24 nm. The monomers of C-AuNPs exhibited intense catalytic activity (nanozyme) for the oxidization of TMB, revealed by the production of instant blue colour and confirmed by a sharp peak at 652 nm. The proposed biosensor’s detection limit and linear ranges were 5.8 ng·mL⁻¹ and 11.6–92.8 ng·mL⁻¹, respectively, for PE. The results strongly advocate that the suggested facile colorimetric biosensor may provide an excellent platform for on-site monitoring of OPs.

Boosting the Photoluminescent Properties of Protein-Stabilized Gold Nanoclusters through Protein Engineering

This work reports on the use of protein engineering as a versatile tool to rationally design metal-binding proteins for the synthesis of highly photoluminescent protein-stabilized gold nanoclusters (Prot-AuNCs). The use of a single repeat protein scaffold allowed the incorporation of a set of designed metal-binding sites to understand the effect of the metal-coordinating residues and the protein environment on the photoluminescent (PL) properties of gold nanoclusters (AuNCs). The resulting Prot-AuNCs, synthesized by two sustainable procedures, showed size-tunable color emission and outstanding PL properties. In a second stage, tryptophan (Trp) residues were introduced at specific positions to provide an electron-rich protein environment and favor energy transfer from Trps to AuNCs. This modification resulted in improved PL properties relevant for future applications in sensing, biological labeling, catalysis, and optics.

An ultrasensitive chemiluminescent biosensor for tracing glutathione in human serum using BSA@AuNCs as a peroxidase-mimetic nanozyme on a luminol/artesunate system

In this work, a nanosensor chemiluminescent (CL) probe for sensing glutathione (GSH) was developed, for the first time, based on its inhibition of the intrinsic peroxidase-mimetic effect of BSA@AuNCs. The endoperoxide linkage of artesunate could be hydrolyzed by BSA@AuNCs resulting in the release of reactive oxygen species (ROS), and the consequent generation of strong CL emission. By virtue of the strong covalent interactions of -S⋯Au-, GSH could greatly suppress the peroxidase-mimetic effect of BSA@AuNCs, leading to a drastic CL quenching. The CL quenching efficiency increased proportionally to the logarithm of GSH concentration through the linearity range of 50.0-5000.0 nM with a limit of detection of 5.2 nM. This CL-based strategy for GSH tracing demonstrated the advantages of ultrasensitivity, high selectivity and simplicity. This strategy was successfully utilized to measure GSH levels in human serum with reasonable recovery results of 98.71%, 103.18%, and 101.68%, suggesting that this turn-off CL sensor is a promising candidate for GSH in biological and clinical samples.

Selective colorimetric sensing of sub-nanomolar Hg2+ based on its significantly enhancing peroxidase mimics of silver/copper nanoclusters

A simple colorimetric sensing strategy for Hg²⁺ ions was developed using silver/copper nanoclusters (Ag/Cu NCs) with excellent selectivity and sensitivity. Bimetallic Ag/Cu NCs were synthesized by using glutathione (GSH) as a template and sodium borohydride as a reducing agent. It was found that the peroxidase-like activity of Ag/Cu NCs was significantly enhanced in the presence of Hg²⁺. Therefore, a colorimetric method based on catalysis was developed to detect Hg²⁺ with a linear concentration range of 0.1-700 nM and a detection limit of 0.05 nM (S/N = 3). The common species have no effect on Hg²⁺ ion detection. Furthermore, this method is applicable to accurately detect Hg²⁺ in real aqueous samples and is reproducible. Therefore, owing to the merits of sensitivity, selectivity, rapid response and visual read-out, it can be promising in the development of a portable Hg²⁺ analyzer for on-site detection.

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

Colorimetric detection of acetylcholinesterase and its inhibitor based on thiol-regulated oxidase-like activity of 2D palladium square nanoplates on reduced graphene oxide

A convenient and sensitive colorimetric assay for acetylcholinesterase (AChE) and its inhibitor has been designed based on the oxidase-like activity of {100}-faceted Pd square nanoplates which are grown in situ on reduced graphene oxide (PdSP@rGO). PdSP@rGO can effectively catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) without the assistance of H₂O₂ to generate blue oxidized TMB (oxTMB) with a characteristic absorption peak at 652 nm. In the presence of AChE, acetylthiocholine (ATCh), a typical AChE substrate, is hydrolyzed to thiocholine (TCh). The generated TCh can effectively inhibit the PdSP@rGO-triggered chromogenic reaction of TMB via cheating with Pd, resulting in color fading and decrease in absorbance. Thus, a sensitive probe for AChE activity is constructed with a working range of 0.25-5 mU mL^-1 and  a limit of detection (LOD) of 0.0625 mU mL^-1. Furthermore, because of the inhibition effect of tacrine on AChE, tacrine is also detected through the colorimetric AChE assay system within the concentrations range 0.025-0.4 μM with a LOD of 0.00229 μM. Hence, a rapid and facile colorimetric procedure to sensitively detect AChE and its inhibitor can be anticipated through modulating the oxidase-like activity of PdSP@rGO. Colorimetric method for detection of AChE and its inhibitor is established by modulating the oxidase mimetic activity of {100}-faceted Pd square nanoplates on reduced graphene oxide (PdSP@rGO).

Designing signal-on sensors by regulating nanozyme activity

Nanozymes are nanomaterials with enzyme-like activities. Compared to natural enzymes, nanozymes are more stable and cost-effective, and they have unique properties due to their nanoscale size and surface chemistry. In this review, we summarize 'signal-on' nanozyme-based sensors for detecting metal ions, anions, small molecules and proteins. Since protein-based enzymes are already highly active, they were used to detect their inhibitors, resulting in 'signal-off' sensors. On the other hand, for nanozymes, target molecules were detected either as a promotor of nanozyme activity or for its ability to selectively remove nanozyme inhibitors. In both cases, 'signal-on' detection was achieved. We classify the commonly used nanozymes based on their composition such as metal oxide, gold nanoparticles and other nanomaterials, most of which belong to the oxidase, peroxidase and catalase mimics. The nanozymes can catalyze the oxidation of colorless or non-fluorescent substrates to produce a visual or fluorescent signal. Based on this, this article presents some typical 'turn-on' and 'turn-off-on' sensors, and we critically review their design principles. At the end, further perspectives for the nanozyme-based sensors are outlined.

Amplified electrochemical determination of UO22+ based on the cleavage of the DNAzyme and DNA-modified gold nanoparticle network structure

A superior electrochemical biosensor was designed for the determination of UO₂²⁺ in aqueous solution by integration of DNAzyme and DNA-modified gold nanoparticle (DNA-AuNP) network structure. Key features of this method include UO₂²⁺ inducing the cleavage of the DNAzyme and signal amplification of DNA-AuNP network structure. In this electrochemical method, the DNA-AuNP network structure can be effectively modified on the surface of gold electrode and then employed as an ideal signal amplification unit to generate amplified electrochemical response by inserting a large amount of electrochemically active indicator methylene blue (MB). In the presence of UO₂²⁺, the specific sites on DNA-AuNP network structure can be cleaved by UO₂²⁺, releasing the DNA-AuNP network structure with detectable reduction of electrochemical response intensity. The electrochemical response intensity is related to the concentration of UO₂²⁺. The logarithm of electrochemical response intensity and UO₂²⁺ concentration showed a wide linear range of 10~100 pM, and the detection limit reached 8.1 pM (S/N = 3). This method is successfully used for determination of UO₂²⁺ in water samples. Graphical abstract Fabricated DNAzyme network structure for enhanced electrical signal. Numerical experiments show that the current signal decreases as the concentration of UO₂²⁺ increases. It can be seen that the biosensors could be used to detect UO₂²⁺ in aqueous solution effectively.

Sensitive and selective assay of uranyl based on the aggregation induced fluorescent quenching of protamine capped gold nanoclusters

The protamine capped gold nanoclusters (AuNCs@PRT) were synthesized by an one-pot approach, and utilized as a nanoprobe for highly sensitive and selective assay of U(VI) ions. The method is based on the aggregation induced fluorescent quenching of AuNCs@PRT by U(VI) ions. Under optimum conditions, the decrease of fluorescence intensity displayed a good linear correlation with the concentration of U(VI) ions ranging from 20.4 nM to 9.74 μM, with a detection limit of 6.1 nM. The relative standard deviations were 3.86%, 1.41% and 1.71% via 11 detections at concentrations of 40 nM, 0.40 μM and 4.0 μM of U(VI), respectively. The quenching mechanism was demonstrated to be due to the binding of U(VI) towards PRT to cause the aggregation of AuNCs@PRT rather than metal-metal interaction. The results suggest the potential application of this approach for monitoring the level of U(VI) in environmental samples.

Regenerable and stable sp2 carbon-conjugated covalent organic frameworks for selective detection and extraction of uranium

Uranium is a key element in the nuclear industry, but its unintended leakage has caused health and environmental concerns. Here we report a sp2 carbon-conjugated fluorescent covalent organic framework (COF) named TFPT-BTAN-AO with excellent chemical, thermal and radiation stability is synthesized by integrating triazine-based building blocks with amidoxime-substituted linkers. TFPT-BTAN-AO shows an exceptional UO22+ adsorption capacity of 427 mg g-1 attributable to the abundant selective uranium-binding groups on the highly accessible pore walls of open 1D channels. In addition, it has an ultra-fast response time (2 s) and an ultra-low detection limit of 6.7 nM UO22+ suitable for on-site and real-time monitoring of UO22+, allowing not only extraction but also monitoring the quality of the extracted water. This study demonstrates great potential of fluorescent COFs for radionuclide detection and extraction. By rational designing target ligands, this strategy can be extended to the detection and extraction of other contaminants.

Recent developments of nanoenzyme-based colorimetric sensors for heavy metal detection and the interaction mechanism

This work highlights the application and interaction mechanism of metal nanoparticles, metal oxides, metal sulfides, graphene-based nanomaterials and G-quadruplex, etc. in nanoenzyme-based colorimetric sensors.

Metal Cation Detection in Drinking Water

Maintaining a clean water supply is of utmost importance for human civilization. Human activities are putting an increasing strain on Earth’s freshwater reserves and on the quality of available water on Earth. To ensure cleanliness and potability of water, sensors are required to monitor various water quality parameters in surface, ground, drinking, process, and waste water. One set of parameters with high importance is the presence of cations. Some cations can play a beneficial role in human biology, and others have detrimental effects. In this review, various lab-based and field-based methods of cation detection are discussed, and the uses of these methods for the monitoring of water are investigated for their selectivity and sensitivity. The cations chosen were barium, cadmium, chromium, copper, hardness (calcium, magnesium), lead, mercury, nickel, silver, uranium, and zinc. The methods investigated range from optical (absorbance/fluorescence) to electrical (potentiometry, voltammetry, chemiresistivity), mechanical (quartz crystal microbalance), and spectrometric (mass spectrometry). Emphasis is placed on recent developments in mobile sensing technologies, including for integration into microfluidics.

A review on nanomaterial-based electrochemical, optical, photoacoustic and magnetoelastic methods for determination of uranyl cation

This review (with 177 refs) gives an overview on nanomaterial-based methods for the determination of uranyl ion (UO₂²⁺) by different types of transducers. Following an introduction into the field, a first large section covers the fundamentals of selective recognition of uranyl ion by receptors such as antibodies, aptamers, DNAzymes, peptides, microorganisms, organic ionophores (such as salophens, catechols, phenanthrolines, annulenes, benzo-substituted macrocyclic diamides, organophosphorus receptors, calixarenes, crown ethers, cryptands and β-diketones), by ion imprinted polymers, and by functionalized nanomaterials. A second large section covers the various kinds of nanomaterials (NMs) used, specifically on NMs for electrochemical signal amplification, on NMs acting as signal tags or carriers for signal tags, on fluorescent NMs, on NMs for colorimetric assays, on light scattering NMs, on NMs for surface enhanced Raman scattering (SERS)-based assays and wireless magnetoelastic detection systems. We then discuss detection strategies, with subsections on electrochemical methods (including ion-selective and potentiometric systems, voltammetric systems and impedimetric systems). Further sections treat colorimetric, fluorometric, resonance light scattering-based, SERS-based and photoacoustic methods, and wireless magnetoelastic detection. The current state of the art is summarized, and current challenges are discussed at the end. Graphical abstract An overview is given on nanomaterial-based methods for the detection of uranyl ion by different types of transducers (such as electrochemical, optical, photoacoustic, magnetoelastic, etc) along with a critical discussion of their limitations, benefits and application to real samples.

Spectrographic sensors for uranyl detection in the environment

More and more severe energy problem triggers extensive application of nuclear energy, and the adverse effects brought by nuclear materials such as uranyl to the environment are becoming the concern, as it has become a threat to human's health. Therefore, the detection of uranyl is increasingly important, which aims to make the application of uranium under surveillance and protection. A lot of detection methods employing varying materials based on different techniques for uranyl have been proposed including those using expensive and complicated instruments such as ICP-MS, ESI-MS, and neutron activation analysis etc. Those methods based on expensive instruments often provide quite low limit of detection (LOD) and excellent validity and repeatability, however, methods that are low-cost, convenient and rapid are in demand because these are satisfied characters for on-site and in-time determination. In the review, we discuss uranyl sensors based on spectrographic techniques, which is facile and promising for rapid assessment of uranium content in practical application. Spectrographic techniques including fluorescence, UV-vis spectrophotometry, resonance light scattering (RLS) and surface enhanced Raman scattering (SERS) are evaluated. In detail, the core materials that playing extremely important roles in detection performance are stated consisting of small molecule, biomolecule, polymer and nanomaterial.

The contribution of photoinduced charge-transfer enhancement to the SERS of uranyl(VI) in a uranyl-Ag2O complex

Charge-transfer (CT) is an important enhancement mechanism in the field of surface-enhanced Raman scattering (SERS) that typically increases the Raman intensity of molecules by as much as 10-100 times. Herein, a low-cost Ag₂O aggregates substrate was prepared via a facile chemical precipitation method, and the calculated CT-based enhancement factor of the uranyl ions adsorbed on it reached as high as 10⁵, a metal-comparable value. The efficient photoinduced CT process from the valence band of Ag₂O to the LUMO of uranyl ions under appropriate excitation sources resulted in the repulsion of the axial oxygen atoms of the OUO bond, which enhanced its polarizability, creating a more intense Raman mode. To the best of our knowledge, this study firstly reports such a strong photoinduced CT enhancement of uranyl ions, with concentrations of 10^-8 mol L^-1 or lower being detected using this Ag₂O substrate. Most importantly, this research has shown that the photoinduced CT enhancement also contributes to the SERS of uranyl ions on pure Ag substrates which have often been ascribed to the electromagnetic enhancement in previous studies. In addition, Ag₂O can be used to selectively detect uranyl ions without interference from many other molecules or ions because of the energy matching rule of the photoinduced CT process, which was readily available for uranyl detection in the environmental aqueous solution.

Diverse applications of TMB-based sensing probes

Extending the research on 3,3',5,5'-tetramethylbenzidine (TMB) and its derivatives in analytical chemistry is important, considering that TMB is widely used as an enzyme catalytic substrate. In this work, two TMB derivatives, TMBS and TMBB, were synthesized via a facile and one-step condensation reaction between the -NH2 group of TMB and the -CHO group of salicylaldehyde or benzaldehyde. Because at low pH the two Schiff base compounds can release TMB which can emit strong fluorescence, the probes could show dual-modal signal responses, fluorescence and UV-vis absorption, towards the pH. Practical applications of pH sensing in Chinese rice vinegar and lemon juice samples were successfully demonstrated. On the basis of these findings, a catalytic chromogenic reaction was developed to monitor the pH with the naked eye, too. Furthermore, considering the chemical equilibrium reaction between CO2 and H2O and that glucose oxidase (GOD) can catalyse the dehydrogenation and oxidation reaction of β-d-glucose to produce gluconic acid, both of which can result in lowering the pH values of the two Schiff base systems, highly sensitive and selective dual-modal sensing systems for detecting CO2 and β-d-glucose have also been successfully established. Therefore, the two synthesized TMB derivatives can demonstrate their robust application potential.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Br-PADAP embedded in cellulose acetate electrospun nanofibers: Colorimetric sensor strips for visual uranyl recognition

In this work, a new visual colorimetric strip based on cellulose acetate nanofiber mats modified by 2-(5-Bromo-2-pyridylazo)-5-(diethylamino) phenol was successfully prepared via electrospinning technology. The prepared colorimetric strip showed high sensitivity towards UO₂²⁺ with the yellow-to-purple color change signal. Upon the optimal conditions of solution pH at 6.0 and response time for 80min, the detection limit for UO₂²⁺ can reach 50 ppb. Moreover, the strip also exhibited excellent anti-interference ability in the presence of other metal ions. In order to achieve the quantitative detection for UO₂²⁺, a color-differentiation map was established, which was prepared from converted H values. Finally, the strip was also used to detect UO₂²⁺ in the seawater and showed high sensitivity.

Engineering Nanoscale Iron Oxides for Uranyl Sorption and Separation: Optimization of Particle Core Size and Bilayer Surface Coatings

Herein, we describe engineered superparamagnetic iron oxide nanoparticles (IONPs) as platform materials for enhanced uranyl (UO₂²⁺) sorption and separation processes under environmentally relevant conditions. Specifically, monodispersed 8-25 nm iron oxide (magnetite, Fe₃O₄) nanoparticles with tailored organic acid bilayered coatings have been systematically evaluated and optimized to bind, and thus remove, uranium from water. The combined nonhydrolytic synthesis and bilayer phase transfer material preparation methods yield highly uniform and surface tailorable IONPs, which allow for direct evaluation of the size-dependent and coating-dependent sorption capacities of IONPs. Optimized materials demonstrate ultrahigh sorption capacities (>50% by wt/wt) at pH 5.6 for 8 nm oleic acid (OA) bilayer and sodium monododecyl phosphate (SDP) surface-stabilized IONPs. Synchrotron-based X-ray absorption spectroscopy shows that iron oxide core particle size and stabilizing surface functional group(s) substantially affect U(VI)-removal mechanisms, specifically the ratio of uptake via adsorption versus reduction to U(IV). Taken together, tunable size and surface functionality, high colloidal stability, and favorable affinity toward uranium provide distinct synergistic advantage(s) for the application of bilayered IONPs as part of the next-generation material-based uranium recovery, remediation, and sensing technologies.

Oxidase-mimicking activity of ultrathin MnO2 nanosheets in colorimetric assay of acetylcholinesterase activity

In the present study, a novel colorimetric sensing platform was constructed for quantitative detection of acetylcholinesterase (AChE) activity and its inhibitor. Manganese dioxide (MnO₂) nanosheets as an oxidase-mimicking nanomaterial could directly oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into oxTMB without the need for horseradish peroxidase and H₂O₂. When AChE was introduced, acetylthiocholine could be catalytically hydrolyzed to produce thiocholine, which easily triggers the decomposition of MnO₂ nanosheets, causing the decrease of solution absorbance. Owing to the inhibition effect of organophosphorus pesticides, the enzymatic activity was suppressed, preventing the decomposition of MnO₂ and resulting in the increase of absorbance. Under optimal conditions, the colorimetric platform shows sensitive responses to AChE and paraoxon in the range of 0.1-15 mU mL^-1 and 0.001-0.1 μg mL^-1, respectively. The detection limits of AChE and paraoxon reached 35 μU mL^-1 and 1.0 ng mL^-1, respectively. Furthermore, the MnO₂-TMB platform has been used to fabricate test strips for rapid and convenient visual detection of AChE and its inhibitor with highly promising performance.

Nanozymes in bionanotechnology: from sensing to therapeutics and beyond

Nanozymes are nanomaterials with enzyme-like characteristics, which have found broad applications in various areas including bionanotechnology and beyond.