Improving the serum stability of site-specific antibody conjugates with sulfone linkers

Selenium chemistry for spatio-selective peptide and protein functionalization

The ability to construct a peptide or protein in a spatio-specific manner is of great interest for therapeutic and biochemical research. However, the various functional groups present in peptide sequences and the need to perform chemistry under mild and aqueous conditions make selective protein functionalization one of the greatest synthetic challenges. The fascinating paradox of selenium (Se) - being found in both toxic compounds and also harnessed by nature for essential biochemical processes - has inspired the recent exploration of selenium chemistry for site-selective functionalization of peptides and proteins. In this Review, we discuss such approaches, including metal-free and metal-catalysed transformations, as well as traceless chemical modifications. We report their advantages, limitations and applications, as well as future research avenues.

Quantifying nanoparticle delivery: challenges, tools, and advances

This review explores challenges and methods for quantifying nanoparticle delivery in therapeutic applications. We discuss three main approaches: (1) functional readouts that assess therapeutic effects post nanoparticle administration, (2) nanocarrier tracking that directly monitors the nanoparticle localization, and (3) cargo tracking that infers nanoparticle localization by measuring encapsulated agents or attached surface tags. Reanalysis of the Wilhelm et al. Cancer Nanomedicine Repository dataset found mixed quantification methodologies, which could cause misleading conclusions. We discuss potential pitfalls in each quantification approach and highlight recent advancements in novel technologies. It is important that researchers select appropriate quantification methods based on their objectives and consider integrating multiple approaches for a comprehensive understanding of in vivo nanoparticle behavior to facilitate their clinical translation.

Chemical technology principles for selective bioconjugation of proteins and antibodies

Proteins are multifunctional large organic compounds that constitute an essential component of a living system. Hence, control over their bioconjugation impacts science at the chemistry-biology-medicine interface. A chemical toolbox for their precision engineering can boost healthcare and open a gateway for directed or precision therapeutics. Such a chemical toolbox remained elusive for a long time due to the complexity presented by the large pool of functional groups. The precise single-site modification of a protein requires a method to address a combination of selectivity attributes. This review focuses on guiding principles that can segregate them to simplify the task for a chemical method. Such a disintegration systematically employs a multi-step chemical transformation to deconvolute the selectivity challenges. It constitutes a disintegrate (DIN) theory that offers additional control parameters for tuning precision in protein bioconjugation. This review outlines the selectivity hurdles faced by chemical methods. It elaborates on the developments in the perspective of DIN theory to demonstrate simultaneous regulation of reactivity, chemoselectivity, site-selectivity, modularity, residue specificity, and protein specificity. It discusses the progress of such methods to construct protein and antibody conjugates for biologics, including antibody-fluorophore and antibody-drug conjugates (AFCs and ADCs). It also briefs how this knowledge can assist in developing small molecule-based covalent inhibitors. In the process, it highlights an opportunity for hypothesis-driven routes to accelerate discoveries of selective methods and establish new targetome in the precision engineering of proteins and antibodies.

A comprehensive review of key factors affecting the efficacy of antibody drug conjugate

Antibody Drug Conjugate (ADC) is an emerging technology to overcome the limitations of chemotherapy by selectively targeting the cancer cells. ADC binds with an antigen, specifically over expressed on the surface of cancer cells, results decrease in bystander effect and increase in therapeutic index. The potency of an ideal ADC is entirely depending on several physicochemical factors such as site of conjugation, molecular weight, linker length, Steric hinderance, half-life, conjugation method, binding energy and so on. Inspite of the fact that there is more than 100 of ADCs are in clinical trial only 14 ADCs are approved by FDA for clinical use. However, to design an ideal ADC is still challenging and there is much more to be done. Here in this review, we have discussed the key components along with their significant role or contribution towards the efficacy of an ADC. Moreover, we also explained about the recent advancement in the conjugation method. Additionally, we spotlit the mode of action of an ADC, recent challenges, and future perspective regarding ADC. The profound knowledge regarding key components and their properties will help in the synthesis or production of different engineered ADCs. Therefore, contributes to develop an ADC with low safety concern and high therapeutic index. We hope this review will improve the understanding and encourage the practicing of research in anticancer ADCs development.

The Chemistry of Creating Chemically Programmed Antibodies (cPAbs): Site-Specific Bioconjugation of Small Molecules

Small-molecule drugs have been employed for years as therapeutics in the pharmaceutical industry. However, small-molecule drugs typically have short in vivo half-lives which is one of the largest impediments to the success of many potentially valuable pharmacologically active small molecules. The undesirable pharmacokinetics and pharmacology associated with some small molecules have led to the development of a new class of bioconjugates known as chemically programmed antibodies (cPAbs). cPAbs are bioconjugates in which antibodies are used to augment small molecules with effector functions and prolonged pharmacokinetic profiles, where the pharmacophore of the small molecule is harnessed for target binding and therefore biological targeting. Many different small molecules can be conjugated to large proteins such as full monoclonal antibodies (IgG), fragment crystallizable regions (Fc), or fragment antigen binding regions (Fab). In order to successfully and site-specifically conjugate small molecules to any class of antibodies (IgG, Fc, or Fab), the molecules must be derivatized with a functional group for ease of conjugation without altering the pharmacology of the small molecules. In this Review, we summarize the different synthetic or biological methods that have been employed to produce cPAbs. These unique chemistries have potential to be applied to other fields of antibody modification such as antibody drug conjugates, radioimmunoconjugates, and fluorophore-tagged antibodies.

Leveraging a Dual Variable Domain Immunoglobulin to Create a Site-Specifically Modified Radioimmunoconjugate

Site-specifically modified radioimmunoconjugates exhibit superior in vitro and in vivo behavior compared to analogues synthesized via traditional stochastic methods. However, the development of approaches to site-specific bioconjugation that combine high levels of selectivity, simple reaction conditions, and clinical translatability remains a challenge. Herein, we describe a novel solution to this problem: the use of dual-variable domain immunoglobulins (DVD-IgG). More specifically, we report the synthesis, in vitro evaluation, and in vivo validation of a 177Lu-labeled radioimmunoconjugate based on HER2DVD, a DVD-IgG containing the HER2-targeting variable domains of trastuzumab and the catalytic variable domains of IgG h38C2. To this end, we first modified HER2DVD with a phenyloxadiazolyl methlysulfone-modified variant of the chelator CHX-A″-DTPA (PODS-CHX-A''-DTPA) and verified the site-specificity of the conjugation for the reactive lysines within the catalytic domains via chemical assay, MALDI-ToF mass spectrometry, and SDS-PAGE. The chelator-bearing immunoconjugate was subsequently labeled with [177Lu]Lu3+ to produce the completed radioimmunoconjugate, [177Lu]Lu-CHX-A″-DTPAPODS-HER2DVD, in >80% radiochemical conversion and a specific activity of 29.5 ± 7.1 GBq/μmol. [177Lu]Lu-CHX-A″-DTPAPODS-HER2DVD did not form aggregates upon prolonged incubation in human serum, displayed 87% stability to demetalation over a 7 days of incubation in serum, and exhibited an immunoreactive fraction of 0.95 with HER2-coated beads. Finally, we compared the pharmacokinetic profile of [177Lu]Lu-CHX-A″-DTPAPODS-HER2DVD to that of a 177Lu-labeled variant of trastuzumab in mice bearing subcutaneous HER2-expressing BT-474 human breast cancer xenografts. The in vivo performance of [177Lu]Lu-CHX-A″-DTPAPODS-HER2DVD matched that of 177Lu-labeled trastuzumab, with the former producing a tumoral activity concentration of 34.1 ± 12.1 %ID/g at 168 h and tumor-to-blood, tumor-to-liver, and tumor-to-kidney activity concentration ratios of 10.5, 9.6, and 21.8, respectively, at the same time point. Importantly, the DVD-IgG did not exhibit a substantially longer serum half-life than the traditional IgG despite its significantly larger size (202 kDa for the former vs 148 kDa for the latter). Taken together, these data suggest that DVD-IgGs represent a viable platform for the future development of highly effective site-specifically labeled radioimmunoconjugates for diagnostic imaging, theranostic imaging, and radioimmunotherapy.

Site-Specific Radiohalogenation of a HER2-Targeted Single-Domain Antibody Fragment Using a Novel Residualizing Prosthetic Agent

Because of their rapid tumor accumulation and normal tissue clearance, single-domain antibody fragments (sdAbs) are an attractive vehicle for developing radiotherapeutics labeled with the α-emitter ²¹¹At. Herein, we have evaluated iso-[²¹¹At]AGMB-PODS, a prosthetic agent that combines a functionality for residualizing radiohalogens with a phenyloxadiazolyl methylsulfone (PODS) moiety for site-specific sdAb conjugation. Iso-[²¹¹At]AGMB-PODS and its radioiodinated analogue were evaluated for thiol-selective conjugation to anti-HER2 5F7 sdAb bearing a C-terminus GGC tail. Both radiohalogenated PODS-5F7GGC conjugates were synthesized in good radiochemical yields and retained high binding affinity on HER2-positive BT474 breast carcinoma cells. Iso-[²¹¹At]AGMB-PODS-5F7GGC was considerably more stable in vitro than its maleimide analogue in the presence of cysteine and human serum albumin (HSA) and exhibited excellent tumor uptake and high in vivo stability. Superior tumor-to-kidney activity ratios were seen for both radiohalogenated PODS-5F7GGC conjugates compared with [¹⁷⁷Lu]Lu-DOTA-PODS-5F7GGC. These results suggest that iso-[²¹¹At]AGMB-PODS-5F7GGC warrants further evaluation for the treatment of HER2-expressing malignancies.

Photofunctional cyclometallated iridium(III) polypyridine methylsulfone complexes as sulfhydryl-specific reagents for bioconjugation, bioimaging and photocytotoxic applications

We report herein near-infrared (NIR)-emitting cyclometallated iridium(III) complexes bearing a heteroaromatic methylsulfone moiety as sulfhydryl-specific reagents; one of the complexes was conjugated to cysteine and cysteine-containing peptides and proteins for bioimaging and photocytotoxic applications.

Antibody-drug conjugate and free geldanamycin combination therapy enhances anti-cancer efficacy

Antibody drug-conjugates (ADCs) targeting human epidermal growth factor (HER2) are a rapidly expanding class of cancer therapeutics. Such ADCs are known to suffer from inefficient trafficking to the lysosome due to HER2 endosomal recycling, leaving most bound ADCs at the cell surface or in early endosomes. This study aims to increase the maximum cytotoxicity of ADC treatment by co-delivering a small molecule inhibitor targeting the primary chaperone of HER2, heat shock protein 90 (HSP90). We hypothesized that inhibiting HSP90 could aid ADC cytotoxicity by overcoming HER2 endosomal recycling. Flow cytometric studies tracking HER2 surface expression revealed ∼ 10 nM geldanamycin (GA) as the threshold for inhibiting HSP90 mediated HER2 recycling. Cytotoxicity studies in HER2 overexpressing cancer cell lines NCI-N87, MDA-MB-453, and SKOV3 demonstrated that co-administration of ADC alongside 100 nM GA significantly increased cytotoxicity compared to ADC alone. In all cases, baseline cytotoxicity was observed even in low HER2 expressing line MDA-MB-231 cells, indicating possible off-target effects. To mitigate this baseline cytotoxicity, a "pulse treatment" regime was adopted where cells are pre-loaded with T-DM1 or T-MMAE ADCs for 4 h, followed by a 4-hour pulse treatment with ADC and 100 nM GA to initiate trafficking of HER2 bound ADC to the lysosome. Afterwards, GA is removed, and ADC treatment is continued. GA pulse co-treatment decreased the amount of ADC required to achieve maximum cytotoxicity while minimizing baseline cytotoxicity. No such co-treatment regime featuring a pulse sequence has been explored before. Such co-treatments could offer a viable solution to increase ADC efficacy in hard to treat or resistant HER2-positive cancers.

Surface Engineering of Graphene through Heterobifunctional Supramolecular-Covalent Scaffolds for Rapid COVID-19 Biomarker Detection

Graphene is a two-dimensional semiconducting material whose application for diagnostics has been a real game-changer in terms of sensitivity and response time, variables of paramount importance to stop the COVID-19 spreading. Nevertheless, strategies for the modification of docking recognition and antifouling elements to obtain covalent-like stability without the disruption of the graphene band structure are still needed. In this work, we conducted surface engineering of graphene through heterofunctional supramolecular-covalent scaffolds based on vinylsulfonated-polyamines (PA-VS). In these scaffolds, one side binds graphene through multivalent π-π interactions with pyrene groups, and the other side presents vinylsulfonated pending groups that can be used for covalent binding. The construction of PA-VS scaffolds was demonstrated by spectroscopic ellipsometry, Raman spectroscopy, and contact angle measurements. The covalent binding of -SH, -NH₂, or -OH groups was confirmed, and it evidenced great chemical versatility. After field-effect studies, we found that the PA-VS-based scaffolds do not disrupt the semiconducting properties of graphene. Moreover, the scaffolds were covalently modified with poly(ethylene glycol) (PEG), which improved the resistance to nonspecific proteins by almost 7-fold compared to the widely used PEG-monopyrene approach. The attachment of recognition elements to PA-VS was optimized for concanavalin A (ConA), a model lectin with a high affinity to glycans. Lastly, the platform was implemented for the rapid, sensitive, and regenerable recognition of SARS-CoV-2 spike protein and human ferritin in lab-made samples. Those two are the target molecules of major importance for the rapid detection and monitoring of COVID-19-positive patients. For that purpose, monoclonal antibodies (mAbs) were bound to the scaffolds, resulting in a surface coverage of 436 ± 30 ng/cm². K_D affinity constants of 48.4 and 2.54 nM were obtained by surface plasmon resonance (SPR) spectroscopy for SARS-CoV-2 spike protein and human ferritin binding on these supramolecular scaffolds, respectively.

The Chemistry Behind ADCs

Combining the selective targeting of tumor cells through antigen-directed recognition and potent cell-killing by cytotoxic payloads, antibody-drug conjugates (ADCs) have emerged in recent years as an efficient therapeutic approach for the treatment of various cancers. Besides a number of approved drugs already on the market, there is a formidable follow-up of ADC candidates in clinical development. While selection of the appropriate antibody (A) and drug payload (D) is dictated by the pharmacology of the targeted disease, one has a broader choice of the conjugating linker (C). In the present paper, we review the chemistry of ADCs with a particular emphasis on the medicinal chemistry perspective, focusing on the chemical methods that enable the efficient assembly of the ADC from its three components and the controlled release of the drug payload.

Synthesis and Comparative In Vivo Evaluation of Site-Specifically Labeled Radioimmunoconjugates for DLL3-Targeted ImmunoPET

Delta-like ligand 3 (DLL3) is a therapeutic target for the treatment of small cell lung cancer, neuroendocrine prostate cancer, and isocitrate dehydrogenase mutant glioma. In the clinic, DLL3-targeted ⁸⁹Zr-immunoPET has the potential to aid in the assessment of disease burden and facilitate the selection of patients suitable for therapies that target the antigen. The overwhelming majority of ⁸⁹Zr-labeled radioimmunoconjugates are synthesized via the random conjugation of desferrioxamine (DFO) to lysine residues within the immunoglobulin. While this approach is admittedly facile, it can produce heterogeneous constructs with suboptimal in vitro and in vivo behavior. In an effort to circumvent these issues, we report the development and preclinical evaluation of site-specifically labeled radioimmunoconjugates for DLL3-targeted immunoPET. To this end, we modified a cysteine-engineered variant of the DLL3-targeting antibody SC16-MB1 with two thiol-reactive variants of DFO: one bearing a maleimide moiety (Mal-DFO) and the other containing a phenyloxadiazolyl methyl sulfone group (PODS-DFO). In an effort to obtain immunoconjugates with a DFO-to-antibody ratio (DAR) of 2, we explored both the reduction of the antibody with tris(2-carboxyethyl) phosphine (TCEP) as well as the use of a combination of glutathione and arginine as reducing and stabilizing agents, respectively. While exerting control over the DAR of the immunoconjugate proved cumbersome using TCEP, the use of glutathione and arginine enabled the selective reduction of the engineered cysteines and thus the formation of homogeneous immunoconjugates. A head-to-head comparison of the resulting ⁸⁹Zr-radioimmunoconjugates in mice bearing DLL3-expressing H82 xenografts revealed no significant differences in tumoral uptake and showed comparable radioactivity concentrations in most healthy nontarget organs. However, ⁸⁹Zr-DFO_PODS-^DAR2SC16-MB1 produced 30% lower uptake (3.3 ± 0.5 %ID/g) in the kidneys compared to ⁸⁹Zr-DFO_Mal-^DAR2SC16-MB1 (4.7 ± 0.5 %ID/g). In addition, H82-bearing mice injected with a ⁸⁹Zr-labeled isotype-control radioimmunoconjugate synthesized using PODS exhibited ∼40% lower radioactivity in the kidneys compared to mice administered its maleimide-based counterpart. Taken together, these results demonstrate the improved in vivo performance of the PODS-based radioimmunoconjugate and suggest that a stable, well-defined DAR2 radiopharmaceutical may be suitable for the clinical immunoPET of DLL3-expressing cancers.

An overview of process development for antibody-drug conjugates produced by chemical conjugation technology

Introduction: We discuss chemical conjugation strategies for antibody-drug conjugates (ADCs) from an industrial perspective and compare three promising chemical conjugation technologies to produce site-specific ADCs.Areas covered: Currently, nine ADCs are commercially approved and all are produced by chemical conjugation technology. However, seven of these ADCs contain a relatively broad drug distribution, potentially limiting their therapeutic indices. In 2019, the first site-specific ADC was launched on the market by Daiichi-Sankyo. This achievement, and an analysis of clinical trials over the last decade, indicates that current industrial interest in the ADC field is shifting toward site-specific conjugation technologies. From an industrial point of view, we aim to provide guidance regarding established conjugation methodologies that have already been applied to scale-up stages. With an emphasis on highly productive, scalable, and synthetic process robustness, conjugation methodologies for ADC production is discussed herein.Expert opinion: All three chemical conjugation technologies described in this review have various advantages and disadvantages, therefore drug developers can utilize these depending on their biological and/or protein targets. The future landscape of the ADC field is also discussed.

DiPODS: A Reagent for Site-Specific Bioconjugation via the Irreversible Rebridging of Disulfide Linkages

Chemoselective reactions with thiols have long held promise for the site-specific bioconjugation of antibodies and antibody fragments. Yet bifunctional probes bearing monovalent maleimides-long the "gold standard" for thiol-based ligations-are hampered by two intrinsic issues: the in vivo instability of the maleimide-thiol bond and the need to permanently disrupt disulfide linkages in order to facilitate bioconjugation. Herein, we present the synthesis, characterization, and validation of DiPODS, a novel bioconjugation reagent containing a pair of oxadiazolyl methyl sulfone moieties capable of irreversibly forming covalent bonds with two thiolate groups while simultaneously rebridging disulfide linkages. The reagent was synthesized from commercially available starting materials in 8 steps, during which rotamers were encountered and investigated both experimentally and computationally. DiPODS is designed to be modular and can thus be conjugated to any payload through a pendant terminal primary amine (DiPODS-PEG₄-NH₂). Subsequently, the modification of a HER2-targeting Fab with a fluorescein-conjugated variant of DiPODS (DiPODS-PEG₄-FITC) reinforced the site-specificity of the reagent, illustrated its ability to rebridge disulfide linkages, and produced an immunoconjugate with in vitro properties superior to those of an analogous construct created using traditional stochastic bioconjugation techniques. Ultimately, we believe that this work has particularly important implications for the synthesis of immunoconjugates, specifically for ensuring that the attachment of cargoes to immunoglobulins is robust, irreversible, and biologically and structurally benign.

Thiol-Reactive PODS-Bearing Bifunctional Chelators for the Development of EGFR-Targeting [18F]AlF-Affibody Conjugates

Site-selective bioconjugation of cysteine-containing peptides and proteins is currently achieved via a maleimide–thiol reaction (Michael addition). When maleimide-functionalized chelators are used and the resulting bioconjugates are subsequently radiolabeled, instability has been observed both during radiosynthesis and post-injection in vivo, reducing radiochemical yield and negatively impacting performance. Recently, a phenyloxadiazolyl methylsulfone derivative (PODS) was proposed as an alternative to maleimide for the site-selective conjugation and radiolabeling of proteins, demonstrating improved in vitro stability and in vivo performance. Therefore, we have synthesized two novel PODS-bearing bifunctional chelators (NOTA-PODS and NODAGA-PODS) and attached them to the EGFR-targeting affibody molecule Z_EGFR:03115. After radiolabeling with the aluminum fluoride complex ([¹⁸F]AlF), both conjugates showed good stability in murine serum. When injected in high EGFR-expressing tumor-bearing mice, [¹⁸F]AlF-NOTA-PODS-Z_EGFR:03115 and [¹⁸F]AlF-NODAGA-PODS-Z_EGFR:03115 showed similar pharmacokinetics and a specific tumor uptake of 14.1 ± 5.3% and 16.7 ± 4.5% ID/g at 1 h post-injection, respectively. The current results are encouraging for using PODS as an alternative to maleimide-based thiol-selective bioconjugation reactions.

An Overview of the Current ADC Discovery Landscape

The prototypical ADC mechanism involving antigen-mediated uptake and lysosomal release is both elegantly simple and scientifically compelling. However, recent clinical-stage failures have prompted a reevaluation of this delivery paradigm and have resulted in an array of new technologies that have the potential to improve the safety and efficacy of up and coming programs. These innovations can generally be categorized into seven areas that will be elaborated on in this chapter: (1) Exploiting new payload mechanisms; (2) Increasing the drug-antibody ratio (DAR); (3) Increasing the antibody penetration; (4) Overcoming ADC resistance mechanisms; (5) Increasing the efficiency of ADC uptake and processing; (6) Mitigating off-target payload exposure; and (7) Employment of noncytotoxic payloads. It is our belief that these seven areas capture the current "landscape" of innovations that are taking place in the design of next-generation ADCs. Together, these advancements are reshaping the ADC field and providing a path forward in the face of the recent clinical setbacks.

Site-Specific Lysine Arylation as an Alternative Bioconjugation Strategy for Chemically Programmed Antibodies and Antibody-Drug Conjugates

By exploiting a uniquely reactive lysine residue (Lys99) for site-specific attachment of small molecules, the humanized catalytic antibody h38C2 has been used as bioconjugation module in the assembly of chemically programmed antibodies and antibody-drug conjugates. Treatment of h38C2 with β-lactam-functionalized small molecules has been previously shown to result in covalent conjugation by selective formation of a stable amide bond with the ε-amino group of the Lys99 residue. Here we report that heteroaryl methylsulfonyl (MS-PODA)-functionalized small molecules represent an alternative bioconjugation strategy through highly efficient, site-specific, and stable arylation of the Lys99 residue. A set of chemically programmed antibodies and antibody-drug conjugates assembled by Lys99 arylation provided proof-of-concept for the therapeutic utility of this alternative bioconjugation strategy. While being equally effective as β-lactam-functionalized ligands for bioconjugation with catalytic antibody h38C2, the MS-PODA moiety offers distinct synthetic advantages, making it highly attractive.

Dual-mechanistic antibody-drug conjugate via site-specific selenocysteine/cysteine conjugation

Background

While all clinically translated antibody-drug conjugates (ADCs) contain a single-drug payload, most systemic cancer chemotherapies involve use of a combination of drugs. These regimens improve treatment outcomes and slow development of drug resistance. We here report the generation of an ADC with a dual-drug payload that combines two distinct mechanisms of action.

Methods

Virtual DNA crosslinking agent PNU-159682 and tubulin polymerization inhibitor monomethyl auristatin F (MMAF) were conjugated to a HER2-targeting antibody via site-specific conjugation at engineered selenocysteine and cysteine residues (thio-selenomab).

Results

The dual-drug ADC showed selective and potent cytotoxicity against HER2-expressing cell lines and exhibited dual mechanisms of action consistent with the attached drugs. While PNU-159682 caused S-phase cell cycle arrest due to its DNA-damaging activity, MMAF simultaneously inhibited tubulin polymerization and caused G2/M-phase cell cycle arrest.

Conclusion

The thio-selenomab platform enables the assembly of dual-drug ADCs with two distinct mechanisms of action.

Dual Site-Specific Antibody Conjugates for Sequential and Orthogonal Cargo Release

Antibody-drug conjugates utilize the antigen specificity of antibodies and the potency of chemotherapeutic and antibiotic drugs for targeted therapy. However, as cancers and bacteria evolve to resist the action of drugs, innovative controlled release methods must be engineered to deliver multidrug cocktails. In this work, we engineer lipoate-acid ligase A (LplA) acceptor peptide (LAP) tags into the constant heavy and light chain of a humanized Her2 targeted antibody, trastuzumab. These engineered LAP tags, along with the glutamine 295 (Q295) residue in the heavy chain, were used to generate orthogonally cleavable site-specific antibody conjugates via a one-pot chemoenzymatic ligation with microbial transglutaminase (mTG) and LplA. We demonstrate orthogonal cargo release from these dual-labeled antibody bioconjugates via matrix metalloproteinase-2 and cathepsin-B-mediated bond cleavage. To the best of our knowledge, this is the first demonstration of temporal control on dual-labeled antibody conjugates, and we believe this platform will allow for sequential release and cooperative drug combinations on a single antibody bioconjugate.

Novel ROR1 inhibitor ARI-1 suppresses the development of non-small cell lung cancer

Limited drug response and severe drug resistance confer the high mortality of non-small-cell lung cancer (NSCLC), a leading cause of cancer death worldwide. There is an urgent need for novel treatment against NSCLC. Receptor tyrosine kinase-like orphan receptor 1 (ROR1) is aberrantly overexpressed and participats in NSCLC development and EGFR-TKIs-induced drug resistance. Increasing evidences indicate that oncogenic ROR1 is a potential target for NSCLC therapy. However, nearly no ROR1 inhibitor was reported until now. Here, combining the computer-aided drug design and cell-based activity screening, we discover (R)-5,7-bis(methoxymethoxy)-2-(4-methoxyphenyl)chroman-4-one (ARI-1) as a novel ROR1 inhibitor. Biological evaluation demonstrates that ARI-1 specifically targets the extracellular frizzled domain of ROR1 and potently suppresses NSCLC cell proliferation and migration by regulating PI3K/AKT/mTOR signaling in a ROR1-dependent manner. Moreover, ARI-1 significantly inhibits tumor growth in vivo without obvious toxicity. Intriguingly, ARI-1 is effective to EGFR-TKIs-resistant NSCLC cells with high ROR1 expression. Therefore, our work suggests that the ROR1 inhibitor ARI-1 is a novel drug candidate for NSCLC treatment, especially for EGFR-TKIs-resisted NSCLC with high ROR1 expression.

Site-Specific Bioconjugation and Multi-Bioorthogonal Labeling via Rapid Formation of a Boron-Nitrogen Heterocycle

Precise control of covalent bond formation in the presence of multiple functional groups is pertinent in the development of many next-generation bioconjugates and materials. Strategies derived from bioorthogonal chemistries are contributing greatly in that regard; however, the gain of chemoselectivity is often compromised by the slow rates of many of these existing chemistries. Recent work on a variation of the classical aldehyde/ketone condensation based on ortho-carbonylphenylboronic acids has uncovered markedly accelerated rates compared to those of the simple carbonyl counterparts. The products of these reactions are distinct, often in the form of boron-nitrogen heterocycles. In particular, we have shown that 2-formylphenylboronic acid (2fPBA), when coupled with an α-amino-hydrazide, produces a unique zwitterionic and stable 2,3,1-benzodiazaborine derivative. In this work, we apply this chemistry to generate chemically defined and functional bioconjugates, herein illustrated with immunoconjugates. We show that an antibody and a fluorophore (as payload) equipped with the relevant reactive handles undergo rapid conjugation at near-stoichiometric ratios, displaying a reaction half-life of only ∼5 min with 2 equiv of the linker payload. Importantly, the reaction can be extended to multicomponent labeling by partnering with the popular strain-promoted azide-alkyne cycloaddition and tetrazine- trans-cyclooctene (Tz-TCO) ligation. The mutual orthogonality to both of these chemistries allows simultaneous triple bioorthogonal conjugations, a rare feat thus far that will widen the scope of various multilabeling applications. Further collaboration with the Tz-TCO reaction enables rapid one-pot synthesis of a site-specific dual-payload antibody conjugate. Altogether, we envision that the 2fPBA-α-amino-hydrazide ligation will facilitate efficient assembly of diverse bioconjugates and materials, enabling access to more complex modalities via partnership with other orthogonal chemistries.

Arylation Chemistry for Bioconjugation

Bioconjugation chemistry has been used to prepare modified biomolecules with functions beyond what nature intended. Central to these techniques is the development of highly efficient and selective bioconjugation reactions that operate under mild, biomolecule compatible conditions. Methods that form a nucleophile-sp2 carbon bond show promise for creating bioconjugates with new modifications, sometimes resulting in molecules with unparalleled functions. Here we outline and review sulfur, nitrogen, selenium, oxygen, and carbon arylative bioconjugation strategies and their applications to modify peptides, proteins, sugars, and nucleic acids.

Synthesis and Bioconjugation of Thiol-Reactive Reagents for the Creation of Site-Selectively Modified Immunoconjugates

Maleimide-bearing bifunctional probes have been employed for decades for the site-selective modification of thiols in biomolecules, especially antibodies. Yet maleimide-based conjugates display limited stability in vivo because the succinimidyl thioether linkage can undergo a retro-Michael reaction. This, of course, can lead to the release of the radioactive payload or its exchange with thiol-bearing biomolecules in circulation. Both of these processes can produce elevated activity concentrations in healthy organs as well as decreased activity concentrations in target tissues, resulting in reduced imaging contrast and lower therapeutic ratios. In 2018, we reported the creation of a modular, stable, and easily accessible phenyloxadiazolyl methyl sulfone reagent - dubbed 'PODS' - as a platform for thiol-based bioconjugations. We have clearly demonstrated that PODS-based site-selective bioconjugations reproducibly and robustly create homogenous, well-defined, highly immunoreactive, and highly stable radioimmunoconjugates. Furthermore, preclinical experiments in murine models of colorectal cancer have shown that these site-selectively labeled radioimmunoconjugates exhibit far superior in vivo performance compared to radiolabeled antibodies synthesized via maleimide-based conjugations. In this protocol, we will describe the four-step synthesis of PODS, the creation of a bifunctional PODS-bearing variant of the ubiquitous chelator DOTA (PODS-DOTA), and the conjugation of PODS-DOTA to the HER2-targeting antibody trastuzumab.

Emerging and Re-Emerging Warheads for Targeted Covalent Inhibitors: Applications in Medicinal Chemistry and Chemical Biology

Targeted covalent inhibitors (TCIs) are designed to bind poorly conserved amino acids by means of reactive groups, the so-called warheads. Currently, targeting noncatalytic cysteine residues with acrylamides and other α,β-unsaturated carbonyl compounds is the predominant strategy in TCI development. The recent ascent of covalent drugs has stimulated considerable efforts to characterize alternative warheads for the covalent-reversible and irreversible engagement of noncatalytic cysteine residues as well as other amino acids. This Perspective article provides an overview of warheads-beyond α,β-unsaturated amides-recently used in the design of targeted covalent ligands. Promising reactive groups that have not yet demonstrated their utility in TCI development are also highlighted. Special emphasis is placed on the discussion of reactivity and of case studies illustrating applications in medicinal chemistry and chemical biology.

Rapid nickel(ii)-promoted cysteine S-arylation with arylboronic acids

Nickel salts catalyze fast cysteine arylation with 2-nitroarylboronic acids. The process uses cheap, readily-available reagents and allows introduction of diverse chemical handles.

Thiol-Reactive Bifunctional Chelators for the Creation of Site-Selectively Modified Radioimmunoconjugates with Improved Stability

Maleimide-bearing bifunctional chelators have been used extensively for the site-selective bioconjugation and radiolabeling of peptides and proteins. However, bioconjugates obtained using these constructs inevitably suffer from limited stability in vivo, a trait that translates into suboptimal activity concentrations in target tissues and higher uptake levels in healthy, nontarget tissues. To circumvent this issue, phenyloxadiazolyl methylsulfones have previously been reported as alternatives to maleimides for thiol-based ligations, but these constructs have scarcely been used in the field of radiochemistry. In this report, we describe the synthesis of two thiol-reactive bifunctional chelators for ⁸⁹Zr and ¹⁷⁷Lu based on a new, easy-to-make phenyloxadiazolyl methylsulfone reagent, PODS. Radioimmunoconjugates created using these novel bifunctional chelators displayed in vitro stability that was higher than that of their maleimide-derived cousins. More importantly, positron emission tomography imaging in murine models of cancer revealed that a ⁸⁹Zr-labeled radioimmunoconjugate created using a PODS-bearing bifunctional chelator produced a rate of uptake in nontarget tissues that is significantly lower than that of its analogous maleimide-based counterpart.

PEGylation and Dimerization of Expressed Proteins under Near Equimolar Conditions with Potassium 2-Pyridyl Acyltrifluoroborates

The covalent conjugation of large, functionalized molecules remains a frontier in synthetic chemistry, as it requires rapid, chemoselective reactions. The potassium acyltrifluoroborate (KAT)-hydroxylamine amide-forming ligation shows promise for conjugations of biomolecules under aqueous, acidic conditions, but the variants reported to date are not suited to ligations at micromolar concentrations. We now report that 2-pyridyl KATs display significantly enhanced ligation kinetics over their aryl counterparts. Following their facile, one-step incorporation onto the termini of polyethylene glycol (PEG) chains, we show that 2-pyridyl KATs can be applied to the construction of protein-polymer conjugates in excellent (>95%) yield. Four distinct expressed, folded proteins equipped with a hydroxylamine could be PEGylated with 2-20 kDa 2-pyridyl mPEG KATs in high yield and with near-equimolar amounts of coupling partners. Furthermore, the use of a bis 2-pyridyl PEG KAT enables the covalent homodimerization of proteins with good conversion. The 2-pyridyl KAT ligation offers an effective alternative to conventional protein-polymer conjugation by operating under aqueous acidic conditions well suited for the handling of folded proteins.

Utilization of Selenocysteine for Site-Specific Antibody Conjugation

Site-specific conjugation methods are becoming increasingly important in building next-generation antibody-drug conjugates. We have developed a site-specific conjugation technology based on monoclonal antibodies with engineered selenocysteine (Sec) residues, named selenomabs. Here, we provide protocols for the engineering, expression, and purification of selenomabs in single-chain variable fragment (scFv)-Fc format. Methods for selective conjugation of selenomabs to selenol-reactive compounds and analytical characterization of selenomab conjugates are also included.

Challenges and new frontiers in analytical characterization of antibody-drug conjugates

Antibody-drug conjugates (ADCs) are a growing class of biotherapeutics in which a potent small molecule is linked to an antibody. ADCs are highly complex and structurally heterogeneous, typically containing numerous product-related species. One of the most impactful steps in ADC development is the identification of critical quality attributes to determine product characteristics that may affect safety and efficacy. However, due to the additional complexity of ADCs relative to the parent antibodies, establishing a solid understanding of the major quality attributes and determining their criticality are a major undertaking in ADC development. Here, we review the development challenges, especially for reliable detection of quality attributes, citing literature and new data from our laboratories, highlight recent improvements in major analytical techniques for ADC characterization and control, and discuss newer techniques, such as two-dimensional liquid chromatography, that have potential to be included in analytical control strategies.

In Situ Quenching of Trialkylphosphine Reducing Agents Using Water-Soluble PEG-Azides Improves Maleimide Conjugation to Proteins

Trialkylphosphines tris(2-carboxy-ethyl)-phosphine and tris(3-hydroxypropyl)-phosphine are popular reagents for the reduction of cysteine residues in bioconjugation reactions using maleimides. However, it has been demonstrated that these phosphines are reactive toward maleimide, necessitating their removal before the addition of the Michael acceptor. Here, a method using water-soluble PEG-azides is reported for the quenching of trialkylphosphines in situ, which is demonstrated to improve the level of maleimide conjugation to proteins.

Noninvasive Interrogation of DLL3 Expression in Metastatic Small Cell Lung Cancer

The Notch ligand DLL3 has emerged as a novel therapeutic target expressed in small cell lung cancer (SCLC) and high-grade neuroendocrine carcinomas. Rovalpituzumab teserine (Rova-T; SC16LD6.5) is a first-in-class DLL3-targeted antibody-drug conjugate with encouraging initial safety and efficacy profiles in SCLC in the clinic. Here we demonstrate that tumor expression of DLL3, although orders of magnitude lower in surface protein expression than typical oncology targets of immunoPET, can serve as an imaging biomarker for SCLC. We developed ⁸⁹Zr-labeled SC16 antibody as a companion diagnostic agent to facilitate selection of patients for treatment with Rova-T based on a noninvasive interrogation of the in vivo status of DLL3 expression using PET imaging. Despite low cell-surface abundance of DLL3, immunoPET imaging with ⁸⁹Zr-labeled SC16 antibody enabled delineation of subcutaneous and orthotopic SCLC tumor xenografts as well as distant organ metastases with high sensitivity. Uptake of the radiotracer in tumors was concordant with levels of DLL3 expression and, most notably, DLL3 immunoPET yielded rank-order correlation for response to SC16LD6.5 therapy in SCLC patient-derived xenograft models. Cancer Res; 77(14); 3931-41. ©2017 AACR.

Strategies and challenges for the next generation of antibody-drug conjugates

Antibody-drug conjugates (ADCs) are one of the fastest growing classes of oncology therapeutics. After half a century of research, the approvals of brentuximab vedotin (in 2011) and trastuzumab emtansine (in 2013) have paved the way for ongoing clinical trials that are evaluating more than 60 further ADC candidates. The limited success of first-generation ADCs (developed in the early 2000s) informed strategies to bring second-generation ADCs to the market, which have higher levels of cytotoxic drug conjugation, lower levels of naked antibodies and more-stable linkers between the drug and the antibody. Furthermore, lessons learned during the past decade are now being used in the development of third-generation ADCs. In this Review, we discuss strategies to select the best target antigens as well as suitable cytotoxic drugs; the design of optimized linkers; the discovery of bioorthogonal conjugation chemistries; and toxicity issues. The selection and engineering of antibodies for site-specific drug conjugation, which will result in higher homogeneity and increased stability, as well as the quest for new conjugation chemistries and mechanisms of action, are priorities in ADC research.

Stable and Potent Selenomab-Drug Conjugates

Selenomabs are engineered monoclonal antibodies with one or more translationally incorporated selenocysteine residues. The unique reactivity of the selenol group of selenocysteine permits site-specific conjugation of drugs. Compared with other natural and unnatural amino acid and carbohydrate residues that have been used for the generation of site-specific antibody-drug conjugates, selenocysteine is particularly reactive, permitting fast, single-step, and efficient reactions under near physiological conditions. Using a tailored conjugation chemistry, we generated highly stable selenomab-drug conjugates and demonstrated their potency and selectivity in vitro and in vivo. These site-specific antibody-drug conjugates built on a selenocysteine interface revealed broad therapeutic utility in liquid and solid malignancy models.

Irreversible Cysteine-Selective Protein Labeling Employing Modular Electrophilic Tetrafluoroethylation Reagents

Fluoroalkylation reagents based on hypervalent iodine are widely used to transfer fluoroalkyl moieties to various nucleophiles. However, the transferred groups have so far been limited to simple structural motifs. We herein report a reagent featuring a secondary amine that can be converted to amide, sulfonamide, and tertiary amine derivatives in one step. The resulting reagents bear manifold functional groups, many of which would not be compatible with the original synthetic pathway. Exploiting this structural versatility and the known high reactivity toward thiols, the new-generation reagents were used in bioconjugation with an artificial retro-aldolase, containing an exposed cysteine and a reactive catalytic lysine. Whereas commercial reagents based on maleimide and iodoacetamide labeled both sites, the iodanes exclusively modified the cysteine residue. The study thus demonstrates that modular fluoroalkylation reagents can be used as tools for cysteine-selective bioconjugation.

Marine Antibody-Drug Conjugates: Design Strategies and Research Progress

Antibody-drug conjugates (ADCs), constructed with monoclonal antibodies (mAbs), linkers, and natural cytotoxins, are innovative drugs developed for oncotherapy. Owing to the distinctive advantages of both chemotherapy drugs and antibody drugs, ADCs have obtained enormous success during the past several years. The development of highly specific antibodies, novel marine toxins' applications, and innovative linker technologies all accelerate the rapid R&D of ADCs. Meanwhile, some challenges remain to be solved for future ADCs. For instance, varieties of site-specific conjugation have been proposed for solving the inhomogeneity of DARs (Drug Antibody Ratios). In this review, the usages of various natural toxins, especially marine cytotoxins, and the development strategies for ADCs in the past decade are summarized. Representative ADCs with marine cytotoxins in the pipeline are introduced and characterized with their new features, while perspective comments for future ADCs are proposed.

Site-Specifically Labeled Immunoconjugates for Molecular Imaging--Part 2: Peptide Tags and Unnatural Amino Acids

Molecular imaging using radioisotope- or fluorophore-labeled antibodies is increasingly becoming a critical component of modern precision medicine. Yet despite this promise, the vast majority of these immunoconjugates are synthesized via the random coupling of amine-reactive bifunctional probes to lysines within the antibody, a process that can result in heterogeneous and poorly defined constructs with suboptimal pharmacological properties. In an effort to circumvent these issues, the last 5 years have played witness to a great deal of research focused on the creation of effective strategies for the site-specific attachment of payloads to antibodies. These chemoselective modification methods yield immunoconjugates that are more homogenous and better defined than constructs created using traditional synthetic approaches. Moreover, site-specifically labeled immunoconjugates have also been shown to exhibit superior in vivo behavior compared to their randomly modified cousins. The over-arching goal of this two-part review is to provide a broad yet detailed account of the various site-specific bioconjugation approaches that have been used to create immunoconjugates for positron emission tomography (PET), single photon emission computed tomography (SPECT), and fluorescence imaging. In Part 1, we covered site-specific bioconjugation techniques based on the modification of cysteine residues and the chemoenzymatic manipulation of glycans. In Part 2, we will detail two families of bioconjugation approaches that leverage biochemical tools to achieve site-specificity. First, we will discuss modification methods that employ peptide tags either as sites for enzyme-catalyzed ligations or as radiometal coordination architectures. And second, we will examine bioconjugation strategies predicated on the incorporation of unnatural or non-canonical amino acids into antibodies via genetic engineering. Finally, we will compare the advantages and disadvantages of the modification strategies covered in both parts of the review and offer a brief discussion of the overall direction of the field.

Towards the next generation of biomedicines by site-selective conjugation

Bioconjugates represent an emerging class of medicines, which offer therapeutic opportunities overtaking those of the individual components. Many novel bioconjugates have been explored in order to address various emerging medical needs. The last decade has witnessed the exponential growth of new site-selective bioconjugation techniques, however very few methods have made the way into human clinical trials. Here we discuss various applications of site-selective conjugation in biomedicines, including half-life extension, antibody-drug conjugates, conjugate vaccines, bispecific antibodies and cell therapy. The review is intended to highlight both the progress and challenges, and identify a potential roadmap to address the gap.

Site-Specifically Labeled Immunoconjugates for Molecular Imaging--Part 1: Cysteine Residues and Glycans

Due to their remarkable selectivity and specificity for cancer biomarkers, immunoconjugates have emerged as extremely promising vectors for the delivery of diagnostic radioisotopes and fluorophores to malignant tissues. Paradoxically, however, these tools for precision medicine are synthesized in a remarkably imprecise way. Indeed, the vast majority of immunoconjugates are created via the random conjugation of bifunctional probes (e.g., DOTA-NCS) to amino acids within the antibody (e.g., lysines). Yet antibodies have multiple copies of these residues throughout their macromolecular structure, making control over the location of the conjugation reaction impossible. This lack of site specificity can lead to the formation of poorly defined, heterogeneous immunoconjugates with suboptimal in vivo behavior. Over the past decade, interest in the synthesis and development of site-specifically labeled immunoconjugates—both antibody-drug conjugates as well as constructs for in vivo imaging—has increased dramatically, and a number of reports have suggested that these better defined, more homogeneous constructs exhibit improved performance in vivo compared to their randomly modified cousins. In this two-part review, we seek to provide an overview of the various methods that have been developed to create site-specifically modified immunoconjugates for positron emission tomography, single photon emission computed tomography, and fluorescence imaging. We will begin with an introduction to the structure of antibodies and antibody fragments. This is followed by the core of the work: sections detailing the four different approaches to site-specific modification strategies based on cysteine residues, glycans, peptide tags, and unnatural amino acids. These discussions will be divided into two installments: cysteine residues and glycans will be detailed in Part 1 of the review, while peptide tags and unnatural amino acids will be addressed in Part 2. Ultimately, we sincerely hope that this review fosters interest and enthusiasm for site-specific immunoconjugates within the nuclear medicine and molecular imaging communities.

Human Serum Albumin Domain I Fusion Protein for Antibody Conjugation

Bioorthogonal labeling of antibodies enables the conjugation of compounds, such as small molecules or peptides, which expand targeting capacity or enhance cytotoxicity. Taking advantage of a cyclohexene sulfonamide compound that site-selectively labels Lys64 in human serum albumin (HSA), we demonstrate that domain I of HSA can be used as a fusion protein for the preparation of antibody conjugates. Trastuzumab fusions were expressed at the N-terminus of the light chain or the C-terminus of the heavy chain enabling conjugation to small molecules. Moreover, these conjugates retained HER2 binding and proved to be highly stable in human plasma. Antibody conjugation via HSA domain I fusion should therefore have broad utility for making serum-stable antibody conjugates, particularly for antibody-drug conjugates.

Blurring the Role of Oligonucleotides: Spherical Nucleic Acids as a Drug Delivery Vehicle

Nucleic acids are generally regarded as the payload in gene therapy, often requiring a carrier for intracellular delivery. With the recent discovery that spherical nucleic acids enter cells rapidly, we demonstrate that nucleic acids also have the potential to act as a delivery vehicle. Herein, we report an amphiphilic DNA-paclitaxel conjugate, which forms stable micellar nanoparticles in solution. The nucleic acid component acts as both a therapeutic payload for intracellular gene regulation and the delivery vehicle for the drug component. A bioreductively activated, self-immolative disulfide linker is used to tether the drug, allowing free drug to be released upon cell uptake. We found that the DNA-paclitaxel nanostructures enter cells ∼100 times faster than free DNA, exhibit increased stability against nuclease, and show nearly identical cytotoxicity as free drug. These nanostructures allow one to access a gene target and a drug target using only the payloads themselves, bypassing the need for a cocarrier system.

2-(Maleimidomethyl)-1,3-Dioxanes (MD): a Serum-Stable Self-hydrolysable Hydrophilic Alternative to Classical Maleimide Conjugation

The vast majority of antibody-drug conjugates (ADC) are prepared through amine-to-thiol conjugation. To date, N-Succinimidyl-4-(maleimidomethyl) cyclohexanecarboxylate (SMCC) has been one of the most frequently applied reagents for the preparation of ADC and other functional conjugates. However, SMCC-based conjugates suffer from limited stability in blood circulation and from a hydrophobic character of the linker, which may give rise to major pharmacokinetic implications. To address this issue, we have developed a heterobifunctional analogue of a SMCC reagent, i.e., sodium 4-(maleimidomethyl)-1,3-dioxane-5-carbonyl)oxy)-2,3,5,6- tetrafluorobenzenesulfonate (MDTF) for amine-to-thiol conjugation. By replacing the cyclohexyl ring in the SMCC structure with the 1,3-dioxane, we increased the hydrophilicity of the linker. A FRET probe based on MD linker was prepared and showed superior stability compared to the MCC linker in human plasma, as well as in a variety of aqueous buffers. A detailed investigation demonstrated an accelerated succinimide ring opening for MD linker, resulting in stabilized conjugates. Finally, the MDTF reagent was applied for the preparation of serum stable antibody-dye conjugate.

Last-Step Enzymatic [(18) F]-Fluorination of Cysteine-Tethered RGD Peptides Using Modified Barbas Linkers

We report a last-step fluorinase-catalyzed [(18) F]-fluorination of a cysteine-containing RGD peptide. The peptide was attached through sulfur to a modified and more hydrophilic variant of the recently disclosed Barbas linker which was itself linked to a chloroadenosine moiety via a PEGylated chain. The fluorinase was able to use this construct as a substrate for a transhalogenation reaction to generate [(18) F]-radiolabeled RGD peptides, which retained high affinity to cancer-cell relevant αv β3 integrins.

Assessment of reagents for selenocysteine conjugation and the stability of selenocysteine adducts

Conventional antibody-drug conjugates (ADCs) are heterogeneous mixtures that have poor pharmacokinetic properties and decreased efficacy relative to homogenous ADCs. Furthermore, ADCs that are maleimide-based often have inadequate circulatory stability, which can result in premature drug release with consequent off-target toxicities. Selenocysteine-modified antibodies have been developed that allow site-specific antibody conjugation, yielding homogeneous ADCs. Herein, we survey several electrophilic functional groups that react with selenocystine with high efficiency. Several of these result in conjugates with stabilities that are superior to maleimide conjugates. Among these, the allenamide functional group reacts with notably high efficiency, leads to conjugates with remarkable stability, and shows exquisite selectivity for selenocysteine conjugation.