Polyproline II helix is a key structural motif of the elastic PEVK segment of titin

Application of modular isoxazoline-β2,2-amino acid-based peptidomimetics as chemical model systems for studying the tau misfolding

Tau is a microtubule-associated protein essential for regulating microtubule dynamics and axonal transport in neurons. In tauopathies, the transition of tau from a physiological to a pathological form remains unclear, though the hexapeptides PHF6 and PHF6∗ are key in triggering aggregation. These sequences are shielded by a β-hairpin structure in the native state but expose hydrophobic residues during misfolding, promoting self-assembly. This study employs a non-natural β2-amino acid to induce PHF6 and PHF6∗ into either extended or β-hairpin conformations. The extended form triggers tau aggregation without additives, acting as a seed-competent monomer model system. Conversely, the β-hairpin preserves tau in a soluble monomeric state. Additionally, a β-hairpin mimic inspired by Hsp90 showed potential as a chaperone mimic and inhibitor of tau aggregation, offering insights into corrective folding and aggregation modulation in neuronal environments.

Architectonic principles of polyproline II helix bundle protein domains

Glycine rich polyproline II helix assemblies are an emerging class of natural domains found in several proteins with different functions and diverse origins. The distinct properties of these domains relative to those composed of α-helices and β-sheets could make glycine-rich polyproline II helix assemblies a useful building block for protein design. Whereas the high population of polyproline II conformers in disordered state ensembles could facilitate glycine-rich polyproline II helix folding, the architectonic bases of these structures are not well known. Here, we compare and analyze their structures to uncover common features. These protein domains are found to be highly tolerant of distinct flanking sequences. This speaks to the robustness of this fold and strongly suggests that glycine rich polyproline II assemblies could be grafted with other protein domains to engineer new structures and functions. These domains are also well packed with few or no cavities. Moreover, a significant trend towards antiparallel helix configuration is observed in all these domains and could provide stabilizing interactions among macrodipoles. Finally, extensive networks of Cα-H···OC hydrogen bonds are detected in these domains. Despite their diverse evolutionary origins and activities, glycine-rich polyproline II helix assemblies share architectonic features which could help design novel proteins.

A poly-proline II helix in YadA from Yersinia enterocolitica serotype O:9 facilitates heparin binding through electrostatic interactions

Poly-proline II helices are secondary structure motifs frequently found in ligand-binding sites. They exhibit increased flexibility and solvent exposure compared to the strongly hydrogen-bonded α-helices or β-strands and can therefore easily be misinterpreted as completely unstructured regions with an extremely high rotational freedom. Here, we show that the adhesin YadA of Yersinia enterocolitica serotype O:9 contains a poly-proline II helix interaction motif in the N-terminal region. The motif is involved in the interaction of YadAO:9 with heparin, a host glycosaminoglycan. We show that the basic residues within the N-terminal motif of YadA are required for electrostatic interactions with the sulfate groups of heparin. Biophysical methods including CD spectroscopy, solution-state NMR and SAXS all independently support the presence of a poly-proline helix allowing YadAO:9 binding to the rigid heparin. Lastly, we show that host cells deficient in sulfation of heparin and heparan sulfate are not targeted by YadAO:9 -mediated adhesion. We speculate that the YadAO:9 -heparin interaction plays an important and highly strain-specific role in the pathogenicity of Yersinia enterocolitica serotype O:9.

Novel Arginine- and Proline-Rich Candidacidal Peptides Obtained through a Bioinformatic Approach

Antimicrobial resistance is a major public health concern worldwide. Albeit to a lesser extent than bacteria, fungi are also becoming increasingly resistant to antifungal drugs. Moreover, due to the small number of antifungal classes, therapy options are limited, complicating the clinical management of mycoses. In this view, antimicrobial peptides (AMPs) are a potential alternative to conventional drugs. Among these, Proline-rich antimicrobial peptides (PrAMPs), almost exclusively of animal origins, are of particular interest due to their peculiar mode of action. In this study, a search for new arginine- and proline-rich peptides from plants has been carried out with a bioinformatic approach by sequence alignment and antimicrobial prediction tools. Two peptide candidates were tested against planktonic cells and biofilms of Candida albicans and Candida glabrata strains, including resistant isolates. These peptides showed similar potent activity, with half-maximal effective concentration values in the micromolar range. In addition, some structural and functional features, revealing peculiar mechanistic behaviors, were investigated.

The Poly-E motif in Titin's PEVK region undergoes pH dependent conformational changes

The muscle protein titin plays a crucial role in passive elasticity and the disordered PEVK region within titin is central to that function. The PEVK region is so named due to its high proline, glutamate, valine and lysine content and the high charge density in this region results in a lack of organized structure within this domain. The PEVK region is highly extensible but the molecular interactions that contribute to the elastic nature of the PEVK still remain poorly described. The PEVK region is formed by two unique sequence motifs. The PPAK motif is a 26 to 28 amino acid sequence that contains a mixture of charged and hydrophobic residues and is the primary building block for the PEVK region. Poly-E sequence motifs vary in length and contain clusters of 3–4 glutamic acids distributed throughout the motif. In this study, we derived two 28-residue peptides from the human titin protein sequence and measured their structural characteristics over a range of pHs. Our results demonstrate that the poly-E peptide undergoes a shift from a more rigid and elongated state to a more collapsed state as pH decreases with the midpoint of this transition being at pH ~5.5. Interestingly, a similar conformational shift is not observed in the PPAK peptide. These results suggest that the poly-E motif might provide a nucleating site for the PEVK when the muscle is not in an extended state.

•

Poly-E peptides have a more extended conformation at pH 7.0 than PPAK peptides.

•

Poly-E peptides assume a more relaxed conformation below pH 6.

•

PPAK peptides do not show any conformational sensitivity to changes in pH.

A helical lock and key model of polyproline II conformation with SH3

Motivation

More than half of the human proteome contains the proline-rich motif, PxxP. This motif has a high propensity for adopting a left-handed polyproline II (PPII) helix and can potentially bind SH3 domains. SH3 domains are generally grouped into two classes, based on whether the PPII binds in a positive (N-to-C terminal) or negative (C-to-N terminal) orientation. Since the discovery of this structural motif, over six decades ago, a systematic understanding of its binding remains poor and the consensus amino acid sequence that binds SH3 domains is still ill defined.

Results

Here, we show that the PPII interaction with SH3 domains is governed by the helix backbone and its prolines, and their rotation angle around the PPII helical axis. Based on a geometric analysis of 131 experimentally solved SH3 domains in complex with PPIIs, we observed a rotary translation along the helical screw axis, and separated them by 120° into three categories we name α (0–120°), β (120–240°) and γ (240–360°). Furthermore, we found that PPII helices are distinguished by a shifting PxxP motif preceded by positively charged residues which act as a structural reading frame and dictates the organization of SH3 domains; however, there is no one single consensus motif for all classified PPIIs. Our results demonstrate a remarkable apparatus of a lock with a rotating and translating key with no known equivalent machinery in molecular biology. We anticipate our model to be a starting point for deciphering the PPII code, which can unlock an exponential growth in our understanding of the relationship between protein structure and function.

Availability and implementation

We have implemented the proposed methods in the R software environment and in an R package freely available at https://github.com/Grantlab/bio3d.

Supplementary information

Supplementary data are available at Bioinformatics online.

The Singular NMR Fingerprint of a Polyproline II Helical Bundle

Polyproline II (PPII) helices play vital roles in biochemical recognition events and structures like collagen and form part of the conformational landscapes of intrinsically disordered proteins (IDPs). Nevertheless, this structure is generally hard to detect and quantify. Here, we report the first thorough NMR characterization of a PPII helical bundle protein, the Hypogastrura harveyi "snow flea" antifreeze protein (sfAFP). J-couplings and nuclear Overhauser enhancement spectroscopy confirm a natively folded structure consisting of six PPII helices. NMR spectral analyses reveal quite distinct Hα2 versus Hα3 chemical shifts for 28 Gly residues as well as ¹³Cα, ¹⁵N, and ¹HN conformational chemical shifts (Δδ) unique to PPII helical bundles. The ¹⁵N Δδ and ¹HN Δδ values and small negative ¹HN temperature coefficients evince hydrogen-bond formation. ¹H-¹⁵N relaxation measurements reveal that the backbone structure is generally highly rigid on ps-ns time scales. NMR relaxation parameters and biophysical characterization reveal that sfAFP is chiefly a dimer. For it, a structural model featuring the packing of long, flat hydrophobic faces at the dimer interface is advanced. The conformational stability, measured by amide H/D exchange to be 6.24 ± 0.2 kcal·mol^-1, is elevated. These are extraordinary findings considering the great entropic cost of fixing Gly residues and, together with the remarkable upfield chemical shifts of 28 Gly ¹Hα, evidence significant stabilizing contributions from CαHα ||| O═C hydrogen bonds. These stabilizing interactions are corroborated by density functional theory calculations and natural bonding orbital analysis. The singular conformational chemical shifts, J-couplings, high hNOE ratios, small negative temperature coefficients, and slowed H/D exchange constitute a unique set of fingerprints to identify PPII helical bundles, which may be formed by hundreds of Gly-rich motifs detected in sequence databases. These results should aid the quantification of PPII helices in IDPs, the development of improved antifreeze proteins, and the incorporation of PPII helices into novel designed proteins.

The insertion sequence of the N2A region of titin exists in an extended structure with helical characteristics

The giant sarcomere protein titin is the third filament in muscle and is integral to maintaining sarcomere integrity as well as contributing to both active and passive tension. Titin is a multi-domain protein that contains regions of repeated structural elements. The N2A region sits at the boundary between the proximal Ig region of titin that is extended under low force and the PEVK region that is extended under high force. Multiple binding interactions have been associated with the N2A region and it has been proposed that this region acts as a mechanical stretch sensor. The focus of this work is a 117 amino acid portion of the N2A region (N2A-IS), which resides between the proximal Ig domains and the PEVK region. Our work has shown that the N2A-IS region is predicted to contain helical structure in the center while both termini are predicted to be disordered. Recombinantly expressed N2A-IS protein contains 13% α-helical structure, as measured via circular dichroism. Additional α-helical structure can be induced with 2,2,2-trifluoroethanol, suggesting that there is transient helical structure that might be stabilized in the context of the entire N2A region. The N2A-IS region does not exhibit any cooperativity in either thermal or chemical denaturation studies while size exclusion chromatography and Fluorescence Resonance Energy Transfer demonstrates that the N2A-IS region has an extended structure. Combined, these results lead to a model of the N2A-IS region having a helical core with extended N- and C-termini.

Measuring the Elasticity of Poly-l-Proline Helices with Terahertz Spectroscopy

The rigidity of poly-l-proline is an important contributor to the stability of many protein secondary structures, where it has been shown to strongly influence bulk flexibility. The experimental Young's moduli of two known poly-l-proline helical forms, right-handed all-cis (Form I) and left-handed all-trans (Form II), were determined in the crystalline state by using an approach that combines terahertz time-domain spectroscopy, X-ray diffraction, and solid-state density functional theory. Contrary to expectations, the helices were found to be considerably less rigid than many other natural and synthetic polymers, as well as differing greatly from each other, with Young's moduli of 4.9 and 9.6 GPa for Forms I and II, respectively.

Interplay between Structure and Charge as a Key to Allosteric Modulation of Human 20S Proteasome by the Basic Fragment of HIV-1 Tat Protein

The proteasome is a giant protease responsible for degradation of the majority of cytosolic proteins. Competitive inhibitors of the proteasome are used against aggressive blood cancers. However, broadening the use of proteasome-targeting drugs requires new mechanistic approaches to the enzyme's inhibition. In our previous studies we described Tat1 peptide, an allosteric inhibitor of the proteasome derived from a fragment of the basic domain of HIV-Tat1 protein. Here, we attempted to dissect the structural determinants of the proteasome inhibition by Tat1. Single- and multiple- alanine walking scans were performed. Tat1 analogs with stabilized beta-turn conformation at positions 4-5 and 8-9, pointed out by the molecular dynamics modeling and the alanine scan, were synthesized. Structure of Tat1 analogs were analyzed by circular dichroism, Fourier transform infrared and nuclear magnetic resonance spectroscopy studies, supplemented by molecular dynamics simulations. Biological activity tests and structural studies revealed that high flexibility and exposed positive charge are hallmarks of Tat1 peptide. Interestingly, stabilization of a beta-turn at the 8-9 position was necessary to significantly improve the inhibitory potency.

Integrating solid-state NMR and computational modeling to investigate the structure and dynamics of membrane-associated ghrelin

The peptide hormone ghrelin activates the growth hormone secretagogue receptor 1a, also known as the ghrelin receptor. This 28-residue peptide is acylated at Ser3 and is the only peptide hormone in the human body that is lipid-modified by an octanoyl group. Little is known about the structure and dynamics of membrane-associated ghrelin. We carried out solid-state NMR studies of ghrelin in lipid vesicles, followed by computational modeling of the peptide using Rosetta. Isotropic chemical shift data of isotopically labeled ghrelin provide information about the peptide’s secondary structure. Spin diffusion experiments indicate that ghrelin binds to membranes via its lipidated Ser3. Further, Phe4, as well as electrostatics involving the peptide’s positively charged residues and lipid polar headgroups, contribute to the binding energy. Other than the lipid anchor, ghrelin is highly flexible and mobile at the membrane surface. This observation is supported by our predicted model ensemble, which is in good agreement with experimentally determined chemical shifts. In the final ensemble of models, residues 8–17 form an α-helix, while residues 21–23 and 26–27 often adopt a polyproline II helical conformation. These helices appear to assist the peptide in forming an amphipathic conformation so that it can bind to the membrane.

Synthesis and evaluation of a (3R,6S,9S)-2-oxo-1-azabicyclo[4.3.0]nonane scaffold as a mimic of Xaa-trans-Pro in poly-l-proline type II helix conformation

Stereoselective synthesis of a (3R,6S,9S)-2-oxo-1-azabicyclo[4.3.0]nonane mimic of Xaa-trans-Pro in poly-l-proline type II helix conformation is reported.

Multi-responsive biomaterials and nanobioconjugates from resilin-like protein polymers

Nature, through evolution over millions of years, has perfected materials with amazing characteristics and awe-inspiring functionalities that exceed the performance of man-made synthetic materials. One such remarkable material is native resilin - an extracellular skeletal protein that plays a major role in the jumping, flying, and sound production mechanisms in many insects. It is one of the most resilient (energy efficient) elastomeric biomaterials known with a resilience of ∼97% and a fatigue life in excess of 300 million cycles. Recently, resilin-like polypeptides (RLPs) with exquisite control over the amino acid sequence (comprising repeat resilin motifs) and tuneable biological properties and/or functions have been generated by genetic engineering and cloning techniques. RLPs have been the subject of intensive investigation over a decade and are now recognized to be multi-functional and multi-stimuli responsive; including temperature (exhibiting both an upper and a lower critical solution temperature), pH, moisture, ion and photo-responsive with tuneable photo-physical properties. Such unusual multi-stimuli responsiveness has scarcely been offered and reported for either synthetic or natural biopolymers. Furthermore, the directed molecular self-assembly property of RLPs also exhibits promise as efficient templates for the synthesis and stabilization of metal nanoparticles. These developments and observations reveal the opportunities and new challenges for RLPs as novel materials for nanotechnology, nanobiotechnology and therapeutic applications. In this review, we discuss and highlight the design and synthesis of different RLPs, their unique molecular architecture, advanced responsive behaviour, and functionality of hydrogels, solid-liquid interfaces, nanoparticles and nanobioconjugates derived from RLPs.

Resilin: protein-based elastomeric biomaterials

Resilin is an elastomeric protein found in insect cuticles and is remarkable for its high strain, low stiffness, and high resilience. Since the first resilin sequence was identified in Drosophilia melanogaster (fruit fly), researchers have utilized molecular cloning techniques to construct resilin-based proteins for a number of different applications. In addition to exhibiting the superior mechanical properties of resilin, resilin-based proteins are autofluorescent, display self-assembly properties, and undergo phase transitions in response to temperature. These properties have potential application in designing biosensors or environmentally responsive materials for use in tissue engineering or drug delivery. Furthermore, the capability of resilin-based biomaterials has been expanded by designing proteins that include both resilin-based sequences and bioactive domains such as cell-adhesion or matrix metalloproteinase sequences. These new materials maintain the superior mechanical and physical properties of resilin and also have the added benefit of controlling cell response. Because the mechanical and biological properties can be tuned through protein engineering, a wide range of properties can be achieved for tissue engineering applications including muscles, vocal folds, cardiovascular tissues, and cartilage.

Structure of giant muscle proteins

Giant muscle proteins (e.g., titin, nebulin, and obscurin) play a seminal role in muscle elasticity, stretch response, and sarcomeric organization. Each giant protein consists of multiple tandem structural domains, usually arranged in a modular fashion spanning 500 kDa to 4 MDa. Although many of the domains are similar in structure, subtle differences create a unique function of each domain. Recent high and low resolution structural and dynamic studies now suggest more nuanced overall protein structures than previously realized. These findings show that atomic structure, interactions between tandem domains, and intrasarcomeric environment all influence the shape, motion, and therefore function of giant proteins. In this article we will review the current understanding of titin, obscurin, and nebulin structure, from the atomic level through the molecular level.

Synthesis and characterization of recombinant abductin-based proteins

Recombinant proteins are promising tools for tissue engineering and drug delivery applications. Protein-based biomaterials have several advantages over natural and synthetic polymers, including precise control over amino acid composition and molecular weight, modular swapping of functional domains, and tunable mechanical and physical properties. In this work, we describe recombinant proteins based on abductin, an elastomeric protein that is found in the inner hinge of bivalves and functions as a coil spring to keep shells open. We illustrate, for the first time, the design, cloning, expression, and purification of a recombinant protein based on consensus abductin sequences derived from Argopecten irradians . The molecular weight of the protein was confirmed by mass spectrometry, and the protein was 94% pure. Circular dichroism studies showed that the dominant structures of abductin-based proteins were polyproline II helix structures in aqueous solution and type II β-turns in trifluoroethanol. Dynamic light scattering studies illustrated that the abductin-based proteins exhibit reversible upper critical solution temperature behavior and irreversible aggregation behavior at high temperatures. A LIVE/DEAD assay revealed that human umbilical vein endothelial cells had a viability of 98 ± 4% after being cultured for two days on the abductin-based protein. Initial cell spreading on the abductin-based protein was similar to that on bovine serum albumin. These studies thus demonstrate the potential of abductin-based proteins in tissue engineering and drug delivery applications due to the cytocompatibility and its response to temperature.

The alphabet of intrinsic disorder: I. Act like a Pro: On the abundance and roles of proline residues in intrinsically disordered proteins

A significant fraction of every proteome is occupied by biologically active proteins that do not form unique three-dimensional structures. These intrinsically disordered proteins (IDPs) and IDP regions (IDPRs) have essential biological functions and are characterized by extensive structural plasticity. Such structural and functional behavior is encoded in the amino acid sequences of IDPs/IDPRs, which are enriched in disorder-promoting residues and depleted in order-promoting residues. In fact, amino acid residues can be arranged according to their disorder-promoting tendency to form an alphabet of intrinsic disorder that defines the structural complexity and diversity of IDPs/IDPRs. This review is the first in a series of publications dedicated to the roles that different amino acid residues play in defining the phenomenon of protein intrinsic disorder. We start with proline because data suggests that of the 20 common amino acid residues, this one is the most disorder-promoting.

The multifunctional Ca(2+)/calmodulin-dependent protein kinase II delta (CaMKIIδ) phosphorylates cardiac titin's spring elements

Titin-based passive stiffness is post-translationally regulated by several kinases that phosphorylate specific spring elements located within titin's elastic I-band region. Whether titin is phosphorylated by calcium/calmodulin dependent protein kinase II (CaMKII), an important regulator of cardiac function and disease, has not been addressed. The aim of this work was to determine whether CaMKIIδ, the predominant CaMKII isoform in the heart, phosphorylates titin, and to use phosphorylation assays and mass spectrometry to study which of titin's spring elements might be targeted by CaMKIIδ. It was found that CaMKIIδ phosphorylates titin in mouse LV skinned fibers, that the CaMKIIδ sites can be dephosphorylated by protein phosphatase 1 (PP1), and that under baseline conditions, in both intact isolated hearts and skinned myocardium, about half of the CaMKIIδ sites are phosphorylated. Mass spectrometry revealed that both the N2B and PEVK segments are targeted by CaMKIIδ at several conserved serine residues. Whether phosphorylation of titin by CaMKIIδ occurs in vivo, was tested in several conditions using back phosphorylation assays and phospho-specific antibodies to CaMKIIδ sites. Reperfusion following global ischemia increased the phosphorylation level of CaMKIIδ sites on titin and this effect was abolished by the CaMKII inhibitor KN-93. No changes in the phosphorylation level of the PEVK element were found suggesting that the increased phosphorylation level of titin in IR (ischemia reperfusion) might be due to phosphorylation of the N2B element. The findings of these studies show for the first time that titin can be phosphoryalated by CaMKIIδ, both in vitro and in vivo, and that titin's molecular spring region that determines diastolic stiffness is a target of CaMKIIδ.

Conformational dynamics of titin PEVK explored with FRET spectroscopy

The proline-, glutamate-, valine-, and lysine-rich (PEVK) domain of the giant muscle protein titin is thought to be an intrinsically unstructured random-coil segment. Various observations suggest, however, that the domain may not be completely devoid of internal interactions and structural features. To test the validity of random polymer models for PEVK, we determined the mean end-to-end distances of an 11- and a 21-residue synthetic PEVK peptide, calculated from the efficiency of the fluorescence resonance energy transfer (FRET) between an N-terminal intrinsic tryptophan donor and a synthetically added C-terminal IAEDANS acceptor obtained in steady-state and time-resolved experiments. We find that the contour-length scaling of mean end-to-end distance deviates from predictions of a purely statistical polymer chain. Furthermore, the addition of guanidine hydrochloride decreased, whereas the addition of salt increased the FRET efficiency, pointing at the disruption of structure-stabilizing interactions. Increasing temperature between 10 and 50°C increased the normalized FRET efficiency in both peptides but with different trajectories, indicating that their elasticity and conformational stability are different. Simulations suggest that whereas the short PEVK peptide displays an overall random structure, the long PEVK peptide retains residual, loose helical configurations. Transitions in the local structure and dynamics of the PEVK domain may play a role in the modulation of passive muscle mechanics.

Engineering of an elastic scaffolding polyprotein based on an SH3-binding intrinsically disordered titin PEVK module

Titin is a large elastic protein found in muscle that maintains the elasticity and structural integrity of the sarcomere. The PEVK region of titin is intrinsically disordered, highly elastic and serves as a hub to bind signaling proteins. Systematic investigation of the structure and affinity profile of the PEVK region will provide important information about the functions of titin. Since PEVK is highly heterogeneous due to extensive differential splicing from more than one hundred exons, we engineered and expressed polyproteins that consist of a defined number of identical single exon modules. These customized polyproteins reduce heterogeneity, amplify interactions of less dominant modules, and most importantly, provide tags for atomic force microscopy and allow more readily interpretable data from single-molecule techniques. Expression and purification of recombinant polyprotein with repeat regions presented many technical challenges: recombination events in tandem repeats of identical DNA sequences exacerbated by high GC content, toxicity of polymer plasmid and expressed protein to the bacteria; early truncation of proteins expressed with different numbers of modules; and extreme sensitivity to proteolysis. We have investigated a number of in vitro and in vivo bacterial and yeast expression systems, as well as baculoviral systems as potential solutions to these problems. We successfully expressed and purified in gram quantities a polyprotein derived from human titin exon 172 using Pichia pastoris yeast. This study provides valuable insights into the technical challenges regarding the engineering and purification of a tandem repeat sequence of an intrinsically disordered biopolymer.

Three intrinsically unstructured mussel adhesive proteins, mfp-1, mfp-2, and mfp-3: analysis by circular dichroism

Mussel foot proteins (mfps) mediate fouling by the byssal holdfast and have been extensively investigated as models for versatile polymer-mediated underwater adhesion and coatings. However, insights into the structural properties of mfps have lagged far behind the nanomechanical advances, owing in part to the inability of these proteins to crystallize as well as their limited solubility. Here, solution secondary structures of mfp-1, mfp-2, and mfp-3, localized in the mussel byssal cuticle, adhesive plaque, and plaque-substratum interface, respectively, were investigated using circular dichroism. All three have significant extended coil solution structure, but two, mfp-1 and mfp-2, appear to have punctuated regions of structure separated by unstructured domains. Apart from its punctuated distribution, the structure in mfp-1 resembles other structural proteins such as collagen and plant cell-wall proteins with prominent polyproline II helical structure. As in collagen, PP II structure of mfp-1 is incrementally disrupted by increasing the temperature and by raising pH. However, no recognizable change in mfp-1's PP II structure was evident with the addition with Ca²⁺ and Fe³⁺. In contrast, mfp-2 exhibits Ca²⁺- and disulfide-stabilized epidermal growth factor-like domains separated by unstructured sequence. Mfp-2 showed calcium-binding ability. Bound calcium in mfp-2 was not removed by chelation at pH 5.5, but it was released upon reduction of disulfide bonds. Mfp-3, in contrast, appears to consist largely of unstructured extended coils.

Titin-based tension in the cardiac sarcomere: molecular origin and physiological adaptations

The passive stiffness of cardiac muscle plays a critical role in ventricular filling during diastole and is determined by the extracellular matrix and the sarcomeric protein titin. Titin spans from the Z-disk to the M-band of the sarcomere and also contains a large extensible region that acts as a molecular spring and develops passive force during sarcomere stretch. This extensible segment is titin's I-band region, and its force-generating mechanical properties determine titin-based passive tension. The properties of titin's I-band region can be modulated by isoform splicing and post-translational modification and are intimately linked to diastolic function. This review discusses the physical origin of titin-based passive tension, the mechanisms that alter titin stiffness, and titin's role in stress-sensing signaling pathways.

Investigation of self-assembling proline- and glycine-rich recombinant proteins and peptides inspired by proteins from a symbiotic fungus using atomic force microscopy and circular dichroism spectroscopy

Fiber-forming proteins and peptides are being scrutinized as a promising source of building blocks for new nanomaterials. Arabinogalactan-like (AGL) proteins expressed at the symbiotic interface between plant roots and arbuscular mycorrhizal fungi have novel sequences, hypothesized to form polyproline II (PPII) helix structures. The functional nature of these proteins is unknown but they may form structures for the establishment and maintenance of fungal hyphae. Here we show that recombinant AGL1 (rAGL1) and recombinant AGL3 (rAGL3) are extended proteins based upon secondary structural characteristics determined by electronic circular dichroism (CD) spectroscopy and can self-assemble into fibers and microtubes as observed by atomic force microscopy (AFM) and scanning electron microscopy (SEM). CD spectroscopy results of synthetic peptides based on repeat regions in AGL1, AGL2 and AGL3 suggest that the synthetic peptides contain significant amounts of extended PPII helices and that these structures are influenced by ionic strength and, at least in one case, by concentration. Point mutations of a single residue of the repeat region of AGL3 resulted in altered secondary structures. Self-assembly of these repeats was observed by means of AFM and optical microscopy. Peptide (APADGK)(6) forms structures with similar morphology to rAGL1 suggesting that these repeats are crucial for the morphology of rAGL1 fibers. These novel self-assembling sequences may find applications as precursors for bioinspired nanomaterials.

Role of polyproline II conformation in human tropoelastin structure

In this review, we present a comprehensive overview of the molecular studies on human tropoelastin domains accomplished by Tamburro and co-workers in the last decade. The used approach is the reductionist approach applied to human tropoelastin and is based on the observation that the tropoelastin gene exhibits a cassette-like organization, with a regular alternation of cross-linking and hydrophobic domains putatively responsible for the elasticity of the protein. The peculiar structure of human tropoelastin gene prompted us to study the isolated domains encoded by the exons of tropoelastin, with the perspective to get deep insights into the structural properties of the whole protein. At the molecular level, the results clearly evidence large flexibility of the polypeptide chains in the hydrophobic domains, which oscillate between rather extended and folded conformations. An important role was assigned to poly-proline II conformation considered as the hinge structure in the dynamic conformational equilibrium suggested for the hydrophobic domains. For the lysine-rich cross-linking domains, the structural studies exactly localized α-helix along the polypeptide sequence. Furthermore, at supramolecular level, these studies showed that several domains are able to self-assemble in two different aggregation patterns, the fibrous elastin-like structure for some proline-rich hydrophobic domains and the amyloid-like for some glycine-rich hydrophobic domains. Accordingly, the studies suggest that the reductionist approach was a valid tool for studying a complex protein, such as elastin, elucidating not only the structure but also the specific role played by its constituent domains.

Mechanics on myocardium deficient in the N2B region of titin: the cardiac-unique spring element improves efficiency of the cardiac cycle

Titin (also known as connectin) is an intrasarcomeric muscle protein that functions as a molecular spring and generates passive tension upon muscle stretch. The N2B element is a cardiac-specific spring element within titin's extensible region. Our goal was to study the contribution of the N2B element to the mechanical properties of titin, particularly its hypothesized role in limiting energy loss during repeated stretch (diastole)-shortening (systole) cycles of the heart. We studied energy loss by measuring hysteresis from the area between the stretch and release passive force-sarcomere length curves and used both wild-type (WT) mice and N2B knockout (KO) mice in which the N2B element has been deleted. A range of protocols was used, including those that mimic physiological loading conditions. KO mice showed significant increases in hysteresis. Most prominently, in tissue that had been preconditioned with a physiological stretch-release protocol, hysteresis increased significantly from 320 ± 46 pJ/mm(2)/sarcomere in WT to 650 ± 94 pJ/mm(2)/sarcomere in N2B KO myocardium. These results are supported by experiments in which oxidative stress was used to mechanically inactivate portions of the N2B-Us of WT titin through cysteine cross-linking. Studies on muscle from which the thin filaments had been extracted (using the actin severing protein gelsolin) showed that the difference in hysteresis between WT and KO tissue cannot be explained by filament sliding-based viscosity. Instead the results suggest that hysteresis arises from within titin and most likely involves unfolding of immunoglobulin-like domains. These studies support that the mechanical function of the N2B element of titin includes reducing hysteresis and increasing the efficiency of the heart.

PPII propensity of multiple-guest amino acids in a proline-rich environment

There has been considerable debate about the intrinsic PPII propensity of amino acid residues in denatured polypeptides. Experimentally, this scale is based on the behavior of guest amino acid residues placed in the middle of proline-based hosts. We have used classical molecular dynamics simulations combined with replica-exchange methods to carry out a comprehensive analysis of the conformational equilibria of proline-based host oligopeptides with multiple guest amino acids including alanine, glutamine, valine, and asparagine. The tracked structural characteristics include the secondary structural motifs based on the Ramachandran angles and the cis/trans isomerization of the prolyl bonds. In agreement with our recent study of single amino acid guests, we did not observe an intrinsic PPII propensity in any of the guest amino acids in a multiple-guest setting. Instead, the experimental results can be explained in terms of (i) the steric restrictions imposed on the C-terminal guest amino acid that is immediately followed by a proline residue and (ii) an increase in the trans content of the prolyl bonds due to the presence of guest residues. In terms of the latter, we found that the more guests added to the system, the larger the increase in the trans content of the prolyl bonds, which results in an effective increase in the PPII content of the peptide.

The giant protein titin: a regulatory node that integrates myocyte signaling pathways

Titin, the largest protein in the human body, is well known as a molecular spring in muscle cells and scaffold protein aiding myofibrillar assembly. However, recent evidence has established another important role for titin: that of a regulatory node integrating, and perhaps coordinating, diverse signaling pathways, particularly in cardiomyocytes. We review key findings within this emerging field, including those related to phosphorylation of the titin springs, and also discuss how titin participates in hypertrophic gene regulation and protein quality control.

Order within disorder: aggrecan chondroitin sulphate-attachment region provides new structural insights into protein sequences classified as disordered

Structural investigation of proteins containing large stretches of sequences without predicted secondary structure is the focus of much increased attention. Here, we have produced an unglycosylated 30 kDa peptide from the chondroitin sulphate (CS)-attachment region of human aggrecan (CS-peptide), which was predicted to be intrinsically disordered and compared its structure with the adjacent aggrecan G3 domain. Biophysical analyses, including analytical ultracentrifugation, light scattering, and circular dichroism showed that the CS-peptide had an elongated and stiffened conformation in contrast to the globular G3 domain. The results suggested that it contained significant secondary structure, which was sensitive to urea, and we propose that the CS-peptide forms an elongated wormlike molecule based on a dynamic range of energetically equivalent secondary structures stabilized by hydrogen bonds. The dimensions of the structure predicted from small-angle X-ray scattering analysis were compatible with EM images of fully glycosylated aggrecan and a partly glycosylated aggrecan CS2-G3 construct. The semiordered structure identified in CS-peptide was not predicted by common structural algorithms and identified a potentially distinct class of semiordered structure within sequences currently identified as disordered. Sequence comparisons suggested some evidence for comparable structures in proteins encoded by other genes (PRG4, MUC5B, and CBP). The function of these semiordered sequences may serve to spatially position attached folded modules and/or to present polypeptides for modification, such as glycosylation, and to provide templates for the multiple pleiotropic interactions proposed for disordered proteins.

Contiguous O-galactosylation of 4(R)-hydroxy-l-proline residues forms very stable polyproline II helices

The hydroxyproline-rich glycoproteins (HRGPs) are the major structural proteins of the extracellular matrix of algae and land plants. They are characterized by a rigid polyproline type II (PPII) conformation and extensive O-glycosylation of 4(R)-hydroxy-l-proline (Hyp) residues, which is a unique post-translational modification of proteins. The functional consequences of HRGP glycosylation remains unclear, but they have been implicated in contributing to their structural rigidity. Here, we have investigated the effects of naturally occurring beta-O-galactosylation of Hyp residues on the conformational stability of the PPII helix. In a series of well-defined model peptides Ac-(l-proline)(9)-NH(2) (1), Ac-(Hyp)(9)-NH(2) (2), and Ac-[Hyp(beta-d-galactose)](9)-NH(2) (3) we demonstrate that contiguous O-glycosylation of Hyp residues causes a dramatic increase in the thermal stability of the PPII helix according to analysis of thermal melting curves. This represents the first quantitative data on the contributions of glycosylation to stabilizing the PPII conformation. Molecular modeling indicates the increase in conformational stability may be due to a regular network of interglycan and glycan-peptide hydrogen bonds, in which the carbohydrate residues form a hydrophilic "overcoat" of the PPII helix. Evidence of this shielding effect of the amide backbone may be provided by analysis of the circular dichroism bands, which indicates an increase in the rho value of 3 relative to 1 and 2. This study gives further insight into the effects of naturally occurring Hyp beta-O-linked glycans on the PPII conformation as found in HRGPs in plant cell walls and also indicates that polyproline sequences may be suitable for the development of molecular scaffolds for the presentation of glycan structures.

Extensive and modular intrinsically disordered segments in C. elegans TTN-1 and implications in filament binding, elasticity and oblique striation

TTN-1, a titin like protein in Caenorhabditis elegans, is encoded by a single gene and consists of multiple Ig and fibronectin 3 domains, a protein kinase domain and several regions containing tandem short repeat sequences. We have characterized TTN-1's sarcomere distribution, protein interaction with key myofibrillar proteins as well as the conformation malleability of representative motifs of five classes of short repeats. We report that two antibodies developed to portions of TTN-1 detect an approximately 2-MDa polypeptide on Western blots. In addition, by immunofluorescence staining, both of these antibodies localize to the I-band and may extend into the outer edge of the A-band in the obliquely striated muscle of the nematode. Six different 300-residue segments of TTN-1 were shown to variously interact with actin and/or myosin in vitro. Conformations of synthetic peptides of representative copies of each of the five classes of repeats--39-mer PEVT, 51-mer CEEEI, 42-mer AAPLE, 32-mer BLUE and 30-mer DispRep--were investigated by circular dichroism at different temperatures, ionic strengths and solvent polarities. The PEVT, CEEEI, DispRep and AAPLE peptides display a combination of a polyproline II helix and an unordered structure in aqueous solution and convert in trifluoroethanol to alpha-helix (PEVT, CEEEI, DispRep) and beta-turn (AAPLE) structures, respectively. The octads in BLUE motifs form unstable alpha-helix-like structures coils in aqueous solution and negligible heptad-based, alpha-helical coiled-coils. The alpha-helical structure, as modeled by threading and molecular dynamics simulations, tends to form helical bundles and crosses based on its 8-4-2-2 hydrophobic helical patterns and charge arrays on its surface. Our finding indicates that APPLE, PEVT, CEEEI and DispRep regions are all intrinsically disordered and highly reminiscent of the conformational malleability and elasticity of vertebrate titin PEVK segments. The proposed presence of long, modular and unstable alpha-helical oligomerization domains in the BLUE region of TTN-1 could bundle TTN-1 and stabilize oblique striation of the sarcomere.

Modular structure of smooth muscle Myosin light chain kinase: hydrodynamic modeling and functional implications

Smooth muscle myosin light chain kinase (smMLCK) is a calcium-calmodulin complex-dependent enzyme that activates contraction of smooth muscle. The polypeptide chain of rabbit uterine smMLCK (Swiss-Prot entry P29294) contains the catalytic/regulatory domain, three immunoglobulin-related motifs (Ig), one fibronectin-related motif (Fn3), a repetitive, proline-rich segment (PEVK), and, at the N-terminus, a unique F-actin-binding domain. We have evaluated the spatial arrangement of these domains in a recombinant 125 kDa full-length smMLCK and its two catalytically active C-terminal fragments (77 kDa, residues 461-1147, and 61 kDa, residues 461-1002). Electron microscopic images of smMLCK cross-linked to F-actin show particles at variable distances (11-55 nm) from the filament, suggesting that a well-structured C-terminal segment of smMLCK is connected to the actin-binding domain by a long, flexible tether. We have used structural homology and molecular dynamics methods to construct various all-atom representation models of smMLCK and its two fragments. The theoretical sedimentation coefficients computed with HYDROPRO were compared with those determined by sedimentation velocity. We found agreement between the predicted and observed sedimentation coefficients for models in which the independently folded catalytic domain, Fn3, and Ig domains are aligned consecutively on the long axis of the molecule. The PEVK segment is modeled as an extensible linker that enables smMLCK to remain bound to F-actin and simultaneously activate the myosin heads of adjacent myosin filaments at a distance of >or=40 nm. The structural properties of smMLCK may contribute to the elasticity of smooth muscle cells.

Titin-isoform dependence of titin-actin interaction and its regulation by S100A1/Ca2+ in skinned myocardium

Titin, also known as connectin, is a large filamentous protein that greatly contributes to passive myocardial stiffness. In vitro evidence suggests that one of titin's spring elements, the PEVK, interacts with actin and that this adds a viscous component to passive stiffness. Differential splicing of titin gives rise to the stiff N2B and more compliant N2BA isoforms. Here we studied the titin-isoform dependence of titin-actin interaction and studied the bovine left atrium (BLA) that expresses mainly N2BA titin, and the bovine left ventricle (BLV) that expresses a mixture of both N2B and N2BA isforms. For comparison we also studied mouse left ventricular (MLV) myocardium which expresses predominately N2B titin. Using the actin-severing protein gelsolin, we obtained evidence that titin-actin interaction contributes significantly to passive myocardial stiffness in all tissue types, but most in MLV, least in BLA, and an intermediate level in BLV. We also studied whether titin-actin interaction is regulated by S100A1/calcium and found that calcium alone or S100A1 alone did not alter passive stiffness, but that combined they significantly lowered stiffness. We propose that titin-actin interaction is a “viscous break” that is on during diastole and off during systole.

Proline residues link the active site to transmembrane domain movements in human nucleoside triphosphate diphosphohydrolase 3 (NTPDase3)

The active sites of the membrane-bound nucleoside triphosphate diphosphohydrolases (NTPDases) regulate and are regulated by coordinated and spatially distant movements of their transmembrane helices, modulating enzyme activity, and substrate specificity. Using site-directed mutagenesis, the roles of the conserved proline residues (N-terminal: P52 and P53; C-terminal: P472, P476, P481, P484, and P485) of human NTPDase3, located in the "linker regions" that connect the N- and C-terminal transmembrane helices with the extracellular active site, were examined. Single cysteine substitutions were strategically placed in the transmembrane domain (N-terminal helix: V42C; C-terminal helix: G489C) to serve as cross-linking "sensors" of helical interactions. These "sensor" background mutant proteins (V42C and G489C NTPDase3) are enzymatically active and are cross-linked by copper phenanthroline less efficiently in the presence of adenosine triphosphate (ATP). Proline to alanine substitutions at P53, P481, P484, and P485 in the V42C background, as well as P53, P481, and P484 in the G489C background, exhibited decreased nucleotidase activities. More importantly, alanine substitutions at P53 and P481 in the V42C background and P481 in the G489C background no longer exhibited the ATP-induced decrease in transmembrane cross-linking efficiency. Interestingly, the P485A mutation abolished oxidative cross-linking at G489C both in the presence and absence of ATP. Taken together, these results suggest a role for proline residues 53 and 481 in the linker regions of human NTPDase3 for coupling nucleotide binding at the enzyme active site to movements and/or rearrangements of the transmembrane helices necessary for optimal nucleotide hydrolysis.

The effects of PKCalpha phosphorylation on the extensibility of titin's PEVK element

Post-translational modifications, along with isoform splicing, of titin determine the passive tension development of stretched sarcomeres. It was recently shown that PKCalpha phosphorylates two highly-conserved residues (S26 and S170) of the PEVK region in cardiac titin, resulting in passive tension increase. To determine how each phosphorylated residue affects myocardial stiffness, we generated three recombinant mutant PEVK fragments (S26A, S170A and S170A/S26A), each flanked by Ig domains. Single-molecule force spectroscopy shows that PKCalpha decreases the PEVK persistence length (from 0.99 to 0.68 nm); the majority of this decrease is attributable to phosphorylation of S26. Before PKCalpha, all three mutant PEVK fragments showed at least 40% decrease in persistence length compared to wildtype. Furthermore, Ig domain unfolding force measurements indicate that PEVK's flanking Ig domains are relatively unstable compared to other titin Ig domains. We conclude that phosphorylation of S26 is the primary mechanism through which PKCalpha modulates cardiac stiffness.

Discovery through the computational microscope

All-atom molecular dynamics simulations have become increasingly popular as a tool to investigate protein function and dynamics. However, researchers are concerned about the short time scales covered by simulations, the apparent impossibility to model large and integral biomolecular systems, and the actual predictive power of the molecular dynamics methodology. Here we review simulations that were in the past both hotly disputed and considered key successes, namely of proteins with mainly mechanical functions (titin, fibrinogen, ankyrin, and cadherin). The simulation work covered shows how state-of-the-art modeling alleviates some of the prior concerns and how unrefuted discoveries are made through the "computational microscope."

Mechanical stability and differentially conserved physical-chemical properties of titin Ig-domains

The mechanisms that determine mechanical stabilities of protein folds remain elusive. Our understanding of these mechanisms is vital to both bioengineering efforts and to the better understanding and eventual treatment of pathogenic mutations affecting mechanically important proteins such as titin. We present a new approach to analyze data from single-molecule force spectroscopy for different domains of the giant muscle protein titin. The region of titin found in the I-band of a sarcomere is composed of about 40 Ig-domains and is exposed to force under normal physiological conditions and connects the free-hanging ends of the myosin filaments to the Z-disc. Recent single-molecule force spectroscopy data show a mechanical hierarchy in the I-band domains. Domains near the C-terminus in this region unfold at forces two to three times greater than domains near the beginning of the I-band. Though all of these Ig-domains are thought to share a fold and topology common to members of the Ig-like fold family, the sequences of neighboring domains vary greatly with an average sequence identity of only 25%. We examine in this study the relation of these unique mechanical stabilities of each I-band Ig domain to specific, conserved physical-chemical properties of amino acid sequences in related Ig domains. We find that the sequences of each individual titin Ig domain are very highly conserved, with an average sequence identity of 79% across species that are divergent as humans, chickens, and zebra fish. This indicates that the mechanical properties of each domain are well conserved and tailored to its unique position in the titin molecule. We used the PCPMer software to determine the conservation of amino acid properties in titin Ig domains grouped by unfolding forces into "strong" and "weak" families. We found two motifs unique to each family that may have some role in determining the mechanical properties of these Ig domains. A detailed statistical analysis of properties of individual residues revealed several positions that displayed differentially conserved properties in strong and weak families. In contrast to previous studies, we find evidence that suggests that the mechanical stability of Ig domains is determined by several residues scattered across the beta-sandwich fold, and force sensitive residues are not only confined to the A'-G region.

The tooth enamel protein, porcine amelogenin, is an intrinsically disordered protein with an extended molecular configuration in the monomeric form

Amelogenins make up a class of proteins associated with the formation of mineralized enamel in vertebrates, possess highly conserved N- and C-terminal sequence regions, and represent an interesting model protein system for understanding biomineralization and protein assembly. Using bioinformatics, we report here the identification of molecular traits that classify 12 amelogenin proteins as members of the intrinsically disordered or unstructured protein family (IDPs), a group of proteins that normally exist as unfolded species but are capable of transformation to a folded state as part of their overall function. Using biophysical techniques (CD and NMR), we follow up on our bioinformatics studies and confirm that one of the amelogenins, recombinant porcine rP172, exists in an extended, unfolded state in the monomeric form. This protein exhibits evidence of conformational exchange between two states, and this exchange may be mediated by Pro residues in the sequence. Although the protein is globally unfolded, we detect the presence of local residual secondary structure [alpha-helix, extended beta-strand, turn/loop, and polyproline type II (PPII)] that may serve several functional roles within the enamel matrix. The extended, labile conformation of rP172 amelogenin is compatible with the known functions of amelogenin in enamel biomineralization, i.e., self-assembly, associations with other enamel matrix proteins and with calcium phosphate biominerals, and interaction with cell receptors. It is likely that the labile structure of this protein facilitates interactions of amelogenin with other macromolecules or with minerals for achievement of internal protein stabilization.

A synthetic resilin is largely unstructured

Proresilin is the precursor protein for resilin, an extremely elastic, hydrated, cross-linked insoluble protein found in insects. We investigated the secondary-structure distribution in solution of a synthetic proresilin (AN16), based on 16 units of the consensus proresilin repeat from Anopheles gambiae. Raman spectroscopy was used to verify that the secondary-structure distributions in cross-linked AN16 resilin and in AN16 proresilin are similar, and hence that solution techniques (such as NMR and circular dichroism) may be used to gain information about the structure of the cross-linked solid. The synthetic proresilin AN16 is an intrinsically unstructured protein, displaying under native conditions many of the characteristics normally observed in denatured proteins. There are no apparent alpha-helical or beta-sheet features in the NMR spectra, and the majority of backbone protons and carbons exhibit chemical shifts characteristic of random-coil configurations. Relatively few peaks are observed in the nuclear Overhauser effect spectra, indicating that overall the protein is dynamic and unstructured. The radius of gyration of AN16 corresponds to the value expected for a denatured protein of similar chain length. This high degree of disorder is also consistent with observed circular dichroism and Raman spectra. The temperature dependences of the NH proton chemical shifts were also measured. Most values were indicative of protons exposed to water, although smaller dependences were observed for glycine and alanine within the Tyr-Gly-Ala-Pro sequence conserved in all resilins found to date, which is the site of dityrosine cross-link formation. This result implies that these residues are involved in hydrogen bonds, possibly to enable efficient self-association and subsequent cross-linking. The beta-spiral model for elastic proteins, where the protein is itself shaped like a spring, is not supported by the results for AN16. Both the random-network elastomer model and the sliding beta-turn model are consistent with the data. The results indicate a flat energy landscape for AN16, with very little energy required to switch between conformations. This ease of switching is likely to lead to the extremely low energy loss on deformation of resilin.