Myrothecium verrucaria bilirubin oxidase and its mutants for potential copper ligands

Emerging Trends of Bilirubin Oxidases at the Bioelectrochemical Interface: Paving the Way for Self-Powered Electrochemical Devices and Biosensors

Bilirubin oxidases (BODs) [EC 1.3.3.5 - bilirubin: oxygen oxido-reductase] are enzymes that belong to the multicopper oxidase family and can oxidize bilirubin, diphenols, and aryl amines and reduce the oxygen by direct four-electron transfer from the electrode with almost no electrochemical overpotential. Therefore, BOD is a promising bioelectrocatalyst for (self-powered) biosensors and/or enzymatic fuel cells. The advantages of electrochemically active BOD enzymes include selective biosensing, biocatalysis for efficient energy conversion, and electrosynthesis. Owing to the rise in publications and patents, as well as the expanding interest in BODs for a range of physiological conditions, this Review analyzes scientific literature reports on BOD enzymes and current hypotheses on their bioelectrocatalysis. This Review evaluates the specific research outcomes of the BOD in enzyme (protein) engineering, immobilization strategies, and challenges along with their bioelectrochemical properties, limitations, and applications in the fields of (i) biosensors, (ii) self-powered biosensors, and (iii) biofuel cells for powering bioelectronics.

Trp-His covalent adduct in bilirubin oxidase is crucial for effective bilirubin binding but has a minor role in electron transfer

Unlike any protein studied so far, the active site of bilirubin oxidase from Myrothecium verrucaria contains a unique type of covalent link between tryptophan and histidine side chains. The role of this post-translational modification in substrate binding and oxidation is not sufficiently understood. Our structural and mutational studies provide evidence that this Trp396–His398 adduct modifies T1 copper coordination and is an important part of the substrate binding and oxidation site. The presence of the adduct is crucial for oxidation of substituted phenols and it substantially influences the rate of oxidation of bilirubin. Additionally, we bring the first structure of bilirubin oxidase in complex with one of its products, ferricyanide ion, interacting with the modified tryptophan side chain, Arg356 and the active site-forming loop 393-398. The results imply that structurally and chemically distinct types of substrates, including bilirubin, utilize the Trp–His adduct mainly for binding and to a smaller extent for electron transfer.

The value of enzymes in solar fuels research – efficient electrocatalysts through evolution

Enzymes which evolved more than 2 billion years ago set exceptional standards for electrocatalysts being sought today.

Pyrenyl-carbon nanostructures for scalable enzyme electrocatalysis and biological fuel cells

The objective of this article is to demonstrate the electrode geometric area-based scalability of pyrenyl-carbon nanostructure modification for enzyme electrocatalysis and fuel cell power output using hydrogenase anode and bilirubin oxidase cathode as the model system.

Heterocycle Thiazole Compounds Exhibit Antifungal Activity through Increase in the Production of Reactive Oxygen Species in the Cryptococcus neoformans-Cryptococcus gattii Species Complex

Human cryptococcosis can occur as a primary or opportunistic infection and develops as an acute, subacute, or chronic systemic infection involving different organs of the host. Given the limited therapeutic options and the occasional resistance to fluconazole, there is a need to develop novel drugs for the treatment of cryptococcosis. In this report, we describe promising thiazole compounds 1, 2, 3, and 4 and explore their possible modes of action against Cryptococcus To this end, we show evidence of interference in the Cryptococcus antioxidant system. The tested compounds exhibited MICs ranging from 0.25 to 2 μg/ml against Cryptococcus neoformans strains H99 and KN99α. Interestingly, the knockout strains for Cu oxidase and sarcosine oxidase were resistant to thiazoles. MIC values of thiazole compounds 1, 2, and 4 against these mutants were higher than for the parental strain. After the treatment of C. neoformans ATCC 24067 (or C. deneoformans) and C. gattii strain L27/01 (or C. deuterogattii) with thiazoles, we verified an increase in intracellular reactive oxygen species (ROS). Also, we verified the synergistic interactions among thiazoles and menadione, which generates superoxides, with fractional inhibitory concentrations (FICs) equal to 0.1874, 0.3024, 0.25, and 0.25 for the thiazole compounds 1, 2, 3, and 4, respectively. In addition, thiazoles exhibited antagonistic interactions with parasulphonatephenyl porphyrinato ferrate III (FeTPPS). Thus, in this work, we showed that the action of these thiazoles is related to an interference with the antioxidant system. These findings suggest that oxidative stress may be primarily related to the accumulation of superoxide radicals.

Mechanism of chloride inhibition of bilirubin oxidases and its dependence on potential and pH

Bilirubin oxidases (BODs) belong to the multi-copper oxidase (MCO) family and efficiently reduce O2 at neutral pH and in physiological conditions where chloride concentrations are over 100 mM. BODs were consequently considered to be Cl- resistant contrary to laccases. However, there has not been a detailed study on the related effect of chloride and pH on the redox state of immobilized BODs. Here, we investigate by electrochemistry the catalytic mechanism of O2 reduction by the thermostable Bacillus pumilus BOD immobilized on carbon nanofibers in the presence of NaCl. The addition of chloride results in the formation of a redox state of the enzyme, previously observed for different BODs and laccases, which is only active after a reductive step. This behavior has not been previously investigated. We show for the first time that the kinetics of formation of this state is strongly dependent on pH, temperature, Cl- concentration and on the applied redox potential. UV-visible spectroscopy allows us to correlate the inhibition process by chloride with the formation of the alternative resting form of the enzyme. We demonstrate that O2 is not required for its formation and show that the application of an oxidative potential is sufficient. In addition, our results suggest that the reactivation may proceed thought the T3 β.

A Thermostable Bilirubin-Oxidizing Enzyme from Activated Sludge Isolated by a Metagenomic Approach

A gene coding for a multicopper oxidase (BopA) was identified through the screening of a metagenomic library constructed from wastewater treatment activated sludge. The recombinant BopA protein produced in Escherichia coli exhibited oxidation activity toward 2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS) in the presence of copper, suggesting that BopA is laccase. A bioinformatic analysis of the bopA gene sequence indicated that it has a phylogenetically bacterial origin, possibly derived from a bacterium within the phylum Deinococcus-Thermus. Purified BopA exhibited maximum activity at pH 7.5 with bilirubin as its substrate and was found to be active over a markedly broad pH range from 6 to 11. It also showed notable thermostability; its activity remained intact even after a heat treatment at 90°C for 60 min. This enzyme is a thermostable-bilirubin oxidase that exhibits markedly higher thermostability than that previously reported for laccases.

Two-Electron Reduction versus One-Electron Oxidation of the Type 3 Pair in the Multicopper Oxidases

Multicopper oxidases (MCOs) utilize an electron shuttling Type 1 Cu (T1) site in conjunction with a mononuclear Type 2 (T2) and a binuclear Type 3 (T3) site, arranged in a trinuclear copper cluster (TNC), to reduce O2 to H2O. Reduction of O2 occurs with limited overpotential indicating that all the coppers in the active site can be reduced via high-potential electron donors. Two forms of the resting enzyme have been observed in MCOs: the alternative resting form (AR), where only one of the three TNC Cu's is oxidized, and the resting oxidized form (RO), where all three TNC Cu's are oxidized. In contrast to the AR form, we show that in the RO form of a high-potential MCO, the binuclear T3 Cu(II) site can be reduced via the 700 mV T1 Cu. Systematic spectroscopic evaluation reveals that this proceeds by a two-electron process, where delivery of the first electron, forming a high energy, metastable half reduced T3 state, is followed by the rapid delivery of a second energetically favorable electron to fully reduce the T3 site. Alternatively, when this fully reduced binuclear T3 site is oxidized via the T1 Cu, a different thermodynamically favored half oxidized T3 form, i.e., the AR site, is generated. This behavior is evaluated by DFT calculations, which reveal that the protein backbone plays a significant role in controlling the environment of the active site coppers. This allows for the formation of the metastable, half reduced state and thus the complete reductive activation of the enzyme for catalysis.

A novel resting form of the trinuclear copper center in the double mutant of a multicopper oxidase, CueO, Cys500Ser/Glu506Ala

A multicopper oxidase, CueO was doubly mutated at its type I copper ligand, Cys500 and an acidic amino acid residue located in the proton transfer pathway, Glu506, to Ser and Ala, respectively. Cys500Ser/Glu506Ala was mainly in a novel resting form to afford the absorption band at ca. 400 nm and an EPR signal with a highly anisotropic character derived from type III copper. However, Cys500Ser/Glu506Ala gave the same reaction intermediate (peroxide intermediate) as that from Cys500Ser and Cys500Ser/Glu506Gln.

Bilirubin oxidase-like proteins from Podospora anserina: promising thermostable enzymes for application in transformation of plant biomass

Plant biomass degradation by fungi is a critical step for production of biofuels, and laccases are common ligninolytic enzymes envisioned for ligninolysis. Bilirubin oxidases (BODs)-like are related to laccases, but their roles during lignocellulose degradation have not yet been fully investigated. The two BODs of the ascomycete fungus Podospora anserina were characterized by targeted gene deletions. Enzymatic assay revealed that the bod1(Δ) and bod2(Δ) mutants lost partly a thermostable laccase activity. A triple mutant inactivated for bod1, bod2 and mco, a previously investigated multicopper oxidase gene distantly related to laccases, had no thermostable laccase activity. The pattern of fruiting body production in the bod1(Δ) bod2(Δ) double mutant was changed. The bod1(Δ) and bod2(Δ) mutants were reduced in their ability to grow on ligneous and cellulosic materials. Furthermore, bod1(Δ) and bod2(Δ) mutants were defective towards resistance to phenolic substrates and H2 O2 , which may also impact lignocellulose breakdown. Double and triple mutants were more affected than single mutants, evidencing redundancy of function among BODs and mco. Overall, the data show that bod1, bod2 and mco code for non-canonical thermostable laccases that participate in the degradation of lignocellulose. Thanks to their thermal stability, these enzymes may be more promising candidate for biotechnological application than canonical laccases.

Analysis of the multicopper oxidase gene regulatory network of Aeromonas hydrophila

Multicopper oxidase (MCO) is an enzyme which involves in reducing the oxygen in a four electron reduction to water with concomitant one electron oxidation of reducing the substrate. We have generated the 3-D structure of MCO by homology modeling and validated on the basis of free energy while 90.4 % amino acid residues present in allowed regions of Ramachandran plot. The screening of potential hazardous aromatic compounds for MCO was performed using molecular docking. We obtained Sulfonaphthal, Thymolphthalein, Bromocresol green and Phloretin derivatives of phenol and aromatic hydrocarbon were efficient substrates for MCO. The phylogeny of MCO reveals that other bacteria restrain the homologous gene of MCO may play an important role in biodegradation of aromatic compounds. We have demonstrated the gene regulatory network of MCO with other cellular proteins which play a key role in gene regulation. These findings provide a new insight for oxidization of phenolic and aromatic compounds using biodegradation process for controlling environmental pollution.

Characterisation of a novel white laccase from the deuteromycete fungus Myrothecium verrucaria NF-05 and its decolourisation of dyes

A novel ‘white’ laccase was purified from the deuteromycete fungus, Myrothecium verrucaria NF-05, which was a high laccase-producing strain (40.2 U·ml⁻¹ on the thirteenth day during fermentation). SDS-PAGE and native-PAGE revealed a single band with laccase activity corresponding to a molecular weight of approximately 66 kDa. The enzyme had three copper and one iron atoms per protein molecule determined by ICP-AES. Furthermore, both UV/visible and EPR spectroscopy remained silence, indicating the enzyme a novel laccase with new metal compositions of active centre and spectral properties. The N-terminal amino acid sequence of the purified protein was APQISPQYPM. Together with MALDI-TOF analysis, the protein revealed a high homology of the protein with that from reported M. verrucaria. The highest activity was detected at pH 4.0 and at 30°C. The enzyme activity was significantly enhanced by Na⁺, Mn²⁺, Cu²⁺ and Zn²⁺ while inhibited by DTT, NaN₃ and halogen anions. The kinetic constant (Km) showed the enzyme was more affinitive to ABTS than other tested aromatic substrates. Twelve structurally different dyes could be effectively decolourised by the laccase within 10 min. The high production of the strain and novel properties of the laccase suggested its potential for biotechnological applications.

Spectroscopic and crystallographic characterization of "alternative resting" and "resting oxidized" enzyme forms of bilirubin oxidase: implications for activity and electrochemical behavior of multicopper oxidases

While there is broad agreement on the catalytic mechanism of multicopper oxidases (MCOs), the geometric and electronic structures of the resting trinuclear Cu cluster have been variable, and their relevance to catalysis has been debated. Here, we present a spectroscopic characterization, complemented by crystallographic data, of two resting forms occurring in the same enzyme and define their interconversion. The resting oxidized form shows similar features to the resting form in Rhus vernicifera and Trametes versicolor laccase, characterized by "normal" type 2 Cu electron paramagnetic resonance (EPR) features, 330 nm absorption shoulder, and a short type 3 (T3) Cu-Cu distance, while the alternative resting form shows unusually small A(||) and high g(||) EPR features, lack of 330 nm absorption intensity, and a long T3 Cu-Cu distance. These different forms are evaluated with respect to activation for catalysis, and it is shown that the alternative resting form can only be activated by low-potential reduction, in contrast to the resting oxidized form which is activated via type 1 Cu at high potential. This difference in activity is correlated to differences in redox states of the two forms and highlights the requirement for efficient sequential reduction of resting MCOs for their involvement in catalysis.

Bilirubin oxidase from Magnaporthe oryzae: an attractive new enzyme for biotechnological applications

A novel bilirubin oxidase (BOD), from the rice blast fungus Magnaporthe oryzae, has been identified and isolated. The 64-kDa protein containing four coppers was successfully overexpressed in Pichia pastoris and purified to homogeneity in one step. Protein yield is more than 100 mg for 2 L culture, twice that of Myrothecium verrucaria. The k(cat)/K(m) ratio for conjugated bilirubin (1,513 mM⁻¹ s⁻¹) is higher than that obtained for the BOD from M. verrucaria expressed in native fungus (980 mM⁻¹ s⁻¹), with the lowest K(m) measured for any BOD highly desirable for detection of bilirubin in medical samples. In addition, this protein exhibits a half-life for deactivation >300 min at 37 °C, high stability at pH 7, and high tolerance towards urea, making it an ideal candidate for the elaboration of biofuel cells, powering implantable medical devices. Finally, this new BOD is efficient in decolorizing textile dyes such as Remazol brilliant Blue R, making it useful for environmentally friendly industrial applications.

Electroactive multilayer assemblies of bilirubin oxidase and human cytochrome C mutants: insight in formation and kinetic behavior

Here, we report on cytochrome c/bilirubin oxidase multilayer electrodes with different cytochrome c (cyt c) forms including mutant forms of human cyt c, which exhibit different reaction rates with bilirubin oxidase (BOD) in solution. The multilayer formation via the layer-by-layer technique and the kinetic behavior of the mono (only cyt c) and biprotein (cyt c and BOD) multilayer systems are studied by SPR and cyclic voltammetry. For the layer construction, sulfonated polyaniline is used. The only cyt c containing multilayer electrodes show that the quantity of deposited protein and the kinetic behavior depend on the cyt c form incorporated. In the case of the biprotein multilayer with BOD, it is demonstrated that the catalytic signal chain from the electrode via cyt c to BOD and oxygen can be established with all chosen cyt c forms. However, the magnitude of the catalytic current as well as the kinetic behavior differ significantly. We conclude that the different cytochrome c forms affect three parameters, identified here, to be important for the functionality of the multilayer system: the amount of molecules per layer, which can be immobilized on the electrodes, the cyt c self-exchange rate, and the rate constant for the reaction with BOD.

Mechanistic studies of the 'blue' Cu enzyme, bilirubin oxidase, as a highly efficient electrocatalyst for the oxygen reduction reaction

The 'blue copper' enzyme bilirubin oxidase from Myrothecium verrucaria shows significantly enhanced adsorption on a pyrolytic graphite 'edge' (PGE) electrode that has been covalently modified with naphthyl-2-carboxylate functionalities by diazonium coupling. Modified electrodes coated with bilirubin oxidase show electrocatalytic voltammograms for the direct, four-electron reduction of O(2) by bilirubin oxidase with up to four times the current density of an unmodified PGE electrode. Electrocatalytic voltammograms measured with a rapidly rotating electrode (to remove effects of O(2) diffusion limitation) have a complex shape (an almost linear dependence of current on potential below pH 6) that is similar regardless of how PGE is chemically modified. Importantly, the same waveform is observed if bilirubin oxidase is adsorbed on Au(111) or Pt(111) single-crystal electrodes (at which activity is short-lived). The electrocatalytic behavior of bilirubin oxidase, including its enhanced response on chemically-modified PGE, therefore reflects inherent properties that do not depend on the electrode material. The variation of voltammetric waveshapes and potential-dependent (O(2)) Michaelis constants with pH and analysis in terms of the dispersion model are consistent with a change in rate-determining step over the pH range 5-8: at pH 5, the high activity is limited by the rate of interfacial redox cycling of the Type 1 copper whereas at pH 8 activity is much lower and a sigmoidal shape is approached, showing that interfacial electron transfer is no longer a limiting factor. The electrocatalytic activity of bilirubin oxidase on Pt(111) appears as a prominent pre-wave to electrocatalysis by Pt surface atoms, thus substantiating in a single, direct experiment that the minimum overpotential required for O(2) reduction by the enzyme is substantially smaller than required at Pt. At pH 8, the onset of O(2) reduction lies within 0.14 V of the four-electron O(2)/2H(2)O potential.

X-ray analysis of bilirubin oxidase from Myrothecium verrucaria at 2.3 A resolution using a twinned crystal

Bilirubin oxidase (BOD), a multicopper oxidase found in Myrothecium verrucaria, catalyzes the oxidation of bilirubin to biliverdin. Oxygen is the electron acceptor and is reduced to water. BOD is used for diagnostic analysis of bilirubin in serum and has attracted considerable attention as an enzymatic catalyst for the cathode of biofuel cells that work under neutral conditions. Here, the crystal structure of BOD is reported for the first time. Blue bipyramid-shaped crystals of BOD obtained in 2-methyl-2,4-pentanediol (MPD) and ammonium sulfate solution were merohedrally twinned in space group P6(3). Structure determination was achieved by the single anomalous diffraction (SAD) method using the anomalous diffraction of Cu atoms and synchrotron radiation and twin refinement was performed in the resolution range 33-2.3 A. The overall organization of BOD is almost the same as that of other multicopper oxidases: the protein is folded into three domains and a total of four copper-binding sites are found in domains 1 and 3. Although the four copper-binding sites were almost identical to those of other multicopper oxidases, the hydrophilic Asn residue (at the same position as a hydrophobic residue such as Leu in other multicopper oxidases) very close to the type I copper might contribute to the characteristically high redox potential of BOD.

Decolorization and biodegradation of remazol brilliant blue R by bilirubin oxidase

The dye-decolorizing potential of bilirubin oxidase (BOX) was demonstrated for an anthraquinone dye, remazol brilliant blue R (RBBR). The dye was decolorized 40% within 4 h by the BOX alone, whereas it was more efficient in the presence of 2, 2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), showing 91.5% decolorization within 25 min. The effects of operational parameters on decolorization were examined. The results showed that the decolorization efficiency decreased with increasing RBBR concentration, and a marked inhibition effect was exhibited when the dye concentrations were above 100 mg l(-1). The optimum temperature for enzymatic decolorization was 40 degrees C. BOX showed efficient decolorization of the dye with a wide pH range of 5-8.5. The maximum decolorization activity occurred at pH 8 with ABTS and at pH 5 without ABTS. Analysis of RBBR ultraviolet and visible (UV-VIS) spectra after BOX treatment indicated that the decolorization of RBBR was due to biodegradation. Our results suggested that ABTS can serve as an electron mediator to facilitate the oxidation of RBBR, and the BOX-ABTS mediator-involved dye decolorization mechanism was similar to that of laccase. Operation over a wide range of pH and efficient decolorization suggested that the BOX can be used to decolorize synthetic dyes from effluents, especially for anthraquinonic dyes.