1
|
Yuan W, Xu J, Yang N, Wang H, Li J, Zhang M, Zhu M. Engineered Dynamic Hydrogel Niches for the Regulation of Redox Homeostasis in Osteoporosis and Degenerative Endocrine Diseases. Gels 2023; 10:31. [PMID: 38247755 PMCID: PMC10815676 DOI: 10.3390/gels10010031] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2023] [Revised: 12/20/2023] [Accepted: 12/22/2023] [Indexed: 01/23/2024] Open
Abstract
Osteoporosis and degenerative endocrine diseases are some of the major causes of disability in the elderly. The feedback loop in the endocrine system works to control the release of hormones and maintain the homeostasis of metabolism, thereby regulating the function of target organs. The breakdown of this feedback loop results in various endocrine and metabolic disorders, such as osteoporosis, type II diabetes, hyperlipidemia, etc. The direct regulation of redox homeostasis is one of the most attractive strategies to redress the imbalance of the feedback loop. The biophysical regulation of redox homeostasis can be achieved through engineered dynamic hydrogel niches, with which cellular mechanics and redox homeostasis are intrinsically connected. Mechanotransduction-dependent redox signaling is initiated by cell surface protein assemblies, cadherins for cell-cell junctions, and integrins for cell-ECM interactions. In this review, we focused on the biophysical regulation of redox homeostasis via the tunable cell-ECM interactions in the engineered dynamic hydrogel niches. We elucidate processes from the rational design of the hydrogel matrix to the mechano-signaling initiation and then to the redox response of the encapsulated cells. We also gave a comprehensive summary of the current biomedical applications of this strategy in several degenerative endocrine disease models.
Collapse
Affiliation(s)
- Weihao Yuan
- The Eighth Affiliated Hospital, Sun Yat-Sen University, Shenzhen 518033, China; (N.Y.)
- Weintraub Center for Reconstructive Biotechnology, Division of Advanced Prosthodontics, School of Dentistry, University of California, Los Angeles, CA 90095, USA
| | - Jiankun Xu
- Weintraub Center for Reconstructive Biotechnology, Division of Advanced Prosthodontics, School of Dentistry, University of California, Los Angeles, CA 90095, USA
| | - Na Yang
- Musculoskeletal Research Laboratory, Department of Orthopedics & Traumatology, Li Ka Shing Institute of Health Sciences, The Chinese University of Hong Kong, Hong Kong 999077, China
| | - Han Wang
- Musculoskeletal Research Laboratory, Department of Orthopedics & Traumatology, Li Ka Shing Institute of Health Sciences, The Chinese University of Hong Kong, Hong Kong 999077, China
| | - Jinteng Li
- Musculoskeletal Research Laboratory, Department of Orthopedics & Traumatology, Li Ka Shing Institute of Health Sciences, The Chinese University of Hong Kong, Hong Kong 999077, China
| | - Mengyao Zhang
- Musculoskeletal Research Laboratory, Department of Orthopedics & Traumatology, Li Ka Shing Institute of Health Sciences, The Chinese University of Hong Kong, Hong Kong 999077, China
| | - Meiling Zhu
- Musculoskeletal Research Laboratory, Department of Orthopedics & Traumatology, Li Ka Shing Institute of Health Sciences, The Chinese University of Hong Kong, Hong Kong 999077, China
| |
Collapse
|
2
|
Suwannakot P, Nemec S, Peres NG, Du EY, Kilian KA, Gaus K, Kavallaris M, Gooding JJ. Electrostatic Assembly of Multiarm PEG-Based Hydrogels as Extracellular Matrix Mimics: Cell Response in the Presence and Absence of RGD Cell Adhesive Ligands. ACS Biomater Sci Eng 2023; 9:1362-1376. [PMID: 36826383 DOI: 10.1021/acsbiomaterials.2c01252] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/25/2023]
Abstract
Synthetic hydrogels have been used widely as extracellular matrix (ECM) mimics due to the ability to control and mimic physical and biochemical cues observed in natural ECM proteins such as collagen, laminin, and fibronectin. Most synthetic hydrogels are formed via covalent bonding resulting in slow gelation which is incompatible with drop-on-demand 3D bioprinting of cells and injectable hydrogels for therapeutic delivery. Herein, we developed an electrostatically crosslinked PEG-based hydrogel system for creating high-throughput 3D in vitro models using synthetic hydrogels to mimic the ECM cancer environment. A 3-arm PEG-based polymer backbone was first modified with either permanent cationic charged moieties (2-(methacryloyloxy)ethyl trimethylammonium) or permanent anionic charged moieties (3-sulfopropyl methacrylate potassium salt). The resulting charged polymers can be conjugated further with various amounts of cell adhesive RGD motifs (0, 25, 75, and 98%) to study the influences of RGD motifs on breast cancer (MCF-7) spheroid formation. Formation, stability, and mechanical properties of hydrogels were tested with, and without, RGD to evaluate the cellular response to material parameters in a 3D environment. The hydrogels can be degraded in the presence of salts at room temperature by breaking the interaction of oppositely charged polymer chains. MCF-7 cells could be released with high viability through brief exposure to NaCl solution. Flow cytometry characterization demonstrated that embedded MCF-7 cells proliferate better in a softer (60 Pa) 3D hydrogel environment compared to those that are stiffer (1160 Pa). As the stiffness increases, the RGD motif plays a role in promoting cell proliferation in the stiffer hydrogel. Flow cytometry characterization demonstrated that embedded MCF-7 cells proliferate better in a softer (60 Pa) 3D hydrogel environment compared to those that are stiffer (1160 Pa). As the stiffness increases, the RGD motif plays a role in promoting cell proliferation in the stiffer hydrogel. Additionally, cell viability was not impacted by the tested hydrogel stiffness range between 60 to 1160 Pa. Taken together, this PEG-based tuneable hydrogel system shows great promise as a 3D ECM mimic of cancer extracellular environments with controllable biophysical and biochemical properties. The ease of gelation and dissolution through salt concentration provides a way to quickly harvest cells for further analysis at any given time of interest without compromising cell viability.
Collapse
Affiliation(s)
- Panthipa Suwannakot
- School of Chemistry, UNSW, Sydney, New South Wales 2052, Australia
- Australian Centre for NanoMedicine, UNSW, Sydney, New South Wales 2052, Australia
| | - Stephanie Nemec
- School of Materials Science and Engineering, UNSW, Sydney, New South Wales 2052, Australia
| | - Newton Gil Peres
- School of Medical Sciences, EMBL Australia Node in Single Molecule Science, UNSW, Sydney, New South Wales 2052, Australia
| | - Eric Y Du
- School of Chemistry, UNSW, Sydney, New South Wales 2052, Australia
- Australian Centre for NanoMedicine, UNSW, Sydney, New South Wales 2052, Australia
| | - Kristopher A Kilian
- School of Chemistry, UNSW, Sydney, New South Wales 2052, Australia
- School of Materials Science and Engineering, UNSW, Sydney, New South Wales 2052, Australia
- Australian Centre for NanoMedicine, UNSW, Sydney, New South Wales 2052, Australia
| | - Katharina Gaus
- School of Medical Sciences, EMBL Australia Node in Single Molecule Science, UNSW, Sydney, New South Wales 2052, Australia
| | - Maria Kavallaris
- Children's Cancer Institute, Lowy Cancer Research Centre, UNSW, Sydney, New South Wales 2052, Australia
- Australian Centre for NanoMedicine, UNSW, Sydney, New South Wales 2052, Australia
| | - J Justin Gooding
- School of Chemistry, UNSW, Sydney, New South Wales 2052, Australia
- Australian Centre for NanoMedicine, UNSW, Sydney, New South Wales 2052, Australia
| |
Collapse
|
3
|
Jabbari E, Sepahvandi A. Decellularized Articular Cartilage Microgels as Microcarriers for Expansion of Mesenchymal Stem Cells. Gels 2022; 8:gels8030148. [PMID: 35323261 PMCID: PMC8949257 DOI: 10.3390/gels8030148] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/02/2022] [Revised: 02/17/2022] [Accepted: 02/23/2022] [Indexed: 11/16/2022] Open
Abstract
Conventional microcarriers used for expansion of human mesenchymal stem cells (hMSCs) require detachment and separation of the cells from the carrier prior to use in clinical applications for regeneration of articular cartilage, and the carrier can cause undesirable phenotypic changes in the expanded cells. This work describes a novel approach to expand hMSCs on biomimetic carriers based on adult or fetal decellularized bovine articular cartilage that supports tissue regeneration without the need to detach the expanded cells from the carrier. In this approach, the fetal or adult bovine articular cartilage was minced, decellularized, freeze-dried, ground, and sieved to produce articular cartilage microgels (CMGs) in a specified size range. Next, the hMSCs were expanded on CMGs in a bioreactor in basal medium to generate hMSC-loaded CMG microgels (CMG-MSCs). Then, the CMG-MSCs were suspended in sodium alginate, injected in a mold, crosslinked with calcium chloride, and incubated in chondrogenic medium as an injectable cellular construct for regeneration of articular cartilage. The expression of chondrogenic markers and compressive moduli of the injectable CMG-MSCs/alginate hydrogels incubated in chondrogenic medium were higher compared to the hMSCs directly encapsulated in alginate hydrogels.
Collapse
|
4
|
Bone Regeneration Using MMP-Cleavable Peptides-Based Hydrogels. Gels 2021; 7:gels7040199. [PMID: 34842679 PMCID: PMC8628702 DOI: 10.3390/gels7040199] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2021] [Revised: 10/27/2021] [Accepted: 11/03/2021] [Indexed: 12/16/2022] Open
Abstract
Accumulating evidence has suggested the significant potential of chemically modified hydrogels in bone regeneration. Despite the progress of bioactive hydrogels with different materials, structures and loading cargoes, the desires from clinical applications have not been fully validated. Multiple biological behaviors are orchestrated precisely during the bone regeneration process, including bone marrow mesenchymal stem cells (BMSCs) recruitment, osteogenic differentiation, matrix calcification and well-organized remodeling. Since matrix metalloproteinases play critical roles in such bone metabolism processes as BMSC commitment, osteoblast survival, osteoclast activation matrix calcification and microstructure remodeling, matrix metalloproteinase (MMP) cleavable peptides-based hydrogels could respond to various MMP levels and, thus, accelerate bone regeneration. In this review, we focused on the MMP-cleavable peptides, polymers, functional modification and crosslinked reactions. Applications, perspectives and limitations of MMP-cleavable peptides-based hydrogels for bone regeneration were then discussed.
Collapse
|
5
|
Abstract
The specific microenvironment that cells reside in fundamentally impacts their broader function in tissues and organs. At its core, this microenvironment is composed of precise arrangements of cells that encourage homotypic and heterotypic cell-cell interactions, biochemical signaling through soluble factors like cytokines, hormones, and autocrine, endocrine, or paracrine secretions, and the local extracellular matrix (ECM) that provides physical support and mechanobiological stimuli, and further regulates biochemical signaling through cell-ECM interactions like adhesions and growth factor sequestering. Each cue provided in the microenvironment dictates cellular behavior and, thus, overall potential to perform tissue and organ specific function. It follows that in order to recapitulate physiological cell responses and develop constructs capable of replacing damaged tissue, we must engineer the cellular microenvironment very carefully. Many great strides have been made toward this goal using various three-dimensional (3D) tissue culture scaffolds and specific media conditions. Among the various 3D biomimetic scaffolds, synthetic hydrogels have emerged as a highly tunable and tissue-like biomaterial well-suited for implantable tissue-engineered constructs. Because many synthetic hydrogel materials are inherently bioinert, they minimize unintentional cell responses and thus are good candidates for long-term implantable grafts, patches, and organs. This review will provide an overview of commonly used biomaterials for forming synthetic hydrogels for tissue engineering applications and techniques for modifying them to with bioactive properties to elicit the desired cell responses.
Collapse
Affiliation(s)
- Asli Z Unal
- Department of Biomedical Engineering, Duke University, 101 Science Drive, Campus Box 90281, Durham, North Carolina 27708, United States
| | - Jennifer L West
- Department of Biomedical Engineering, Duke University, 101 Science Drive, Campus Box 90281, Durham, North Carolina 27708, United States
| |
Collapse
|
6
|
Kader S, Monavarian M, Barati D, Moeinzadeh S, Makris TM, Jabbari E. Plasmin-Cleavable Nanoparticles for On-Demand Release of Morphogens in Vascularized Osteogenesis. Biomacromolecules 2019; 20:2973-2988. [DOI: 10.1021/acs.biomac.9b00532] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Affiliation(s)
- Safaa Kader
- Department of Pathology, University of Al-Nahrain, Baghdad 10006, Iraq
| | | | | | | | | | | |
Collapse
|
7
|
Guo J, Sun H, Lei W, Tang Y, Hong S, Yang H, Tay FR, Huang C. MMP-8-Responsive Polyethylene Glycol Hydrogel for Intraoral Drug Delivery. J Dent Res 2019; 98:564-571. [PMID: 30876379 DOI: 10.1177/0022034519831931] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022] Open
Abstract
Currently available drug delivery systems for oral diseases suffer from short retention time and poor local concentrations at the target site. A biodegradable stimulus-responsive hydrogel was synthesized in the present study to evaluate its application as an environmentally sensitive carrier for on-demand intraoral drug delivery. The hydrogel was synthesized from diacrylate-containing polyethylene glycol-based scaffolds and a cysteine-terminated peptide crosslinker (CGPQG↓IWGQC) via a Michael-type addition reaction. Because CGPQG↓IWGQC can be cleaved by matrix metalloproteinase 8 (MMP-8), minocycline hydrochloride, bovine serum albumin, or an antibacterial peptide (KSL) was incorporated into the scaffolds to evaluate the MMP-8-responsive release behavior of the on-demand drug delivery system. Hydrogel characterization and gelation kinetics were examined with gel time, Fourier-transform infrared spectroscopy, scanning electron microscopy, and measurements of rheologic parameters. Degradation behavior and MMP-8-responsive drug release were performed by high-performance liquid chromatography and protein-specific assay. Biocompatibility evaluation indicated that the hydrogels were noncytotoxic. Antibacterial testing demonstrated that the released drugs were able to maintain bioactivity. Taken together, these results suggest that the MMP-8-sensitive hydrogel is a promising candidate for on-demand intraoral localized drug delivery. Because MMP-8 is one of the most important biomarkers for periodontitis, the MMP-8-responsive hydrogel has potential to be used for in situ adaptive degradation in response to chronic periodontitis and peri-implantitis. This notion has to be tested in animal models of periodontal disease.
Collapse
Affiliation(s)
- J Guo
- 1 The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory for Oral Biomedical Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - H Sun
- 1 The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory for Oral Biomedical Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - W Lei
- 2 Department of Prosthodontics, College of Stomatology, Xi'an Jiaotong University, Xi'an, China
| | - Y Tang
- 1 The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory for Oral Biomedical Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - S Hong
- 3 Key Laboratory of Biomedical Polymers of Ministry of Education and Department of Chemistry, Wuhan University, Wuhan, China
| | - H Yang
- 1 The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory for Oral Biomedical Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| | - F R Tay
- 4 Department of Endodontics, The Dental College of Georgia, Augusta, GA, USA
| | - C Huang
- 1 The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory for Oral Biomedical Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, China
| |
Collapse
|
8
|
Lee JK, Choi IS, Oh TI, Lee E. Cell-Surface Engineering for Advanced Cell Therapy. Chemistry 2018; 24:15725-15743. [PMID: 29791047 DOI: 10.1002/chem.201801710] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2018] [Revised: 05/22/2018] [Indexed: 12/16/2022]
Abstract
Stem cells opened great opportunity to overcome diseases that conventional therapy had only limited success. Use of scaffolds made from biomaterials not only helps handling of stem cells for delivery or transplantation but also supports enhanced cell survival. Likewise, cell encapsulation can provide stability for living animal cells even in a state of separateness. Although various chemical reactions were tried to encapsulate stolid microbial cells such as yeasts, a culture environment for the growth of animal cells allows only highly biocompatible reactions. Therefore, the animal cells were mostly encapsulated in hydrogels, which resulted in enhanced cell survival. Interestingly, major findings of chemistry on biological interfaces demonstrate that cell encapsulation in hydrogels have a further a competence for modulating cell characteristics that can go beyond just enhancing the cell survival. In this review, we present a comprehensive overview on the chemical reactions applied to hydrogel-based cell encapsulation and their effects on the characteristics and behavior of living animal cells.
Collapse
Affiliation(s)
- Jungkyu K Lee
- Department of Chemistry and Green-Nano Materials Research Center, Kyungpook National University, 80 Daehak-ro, Buk-gu, Daegu, 41566, Korea
| | - Insung S Choi
- Department of Chemistry and Center for Cell-Encapsulation Research, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Korea
| | - Tong In Oh
- Department of Biomedical Engineering, Kyung Hee University, 23 Kyungheedae-ro, Dongdaemun-gu, Seoul, 02447, Korea
| | - EunAh Lee
- Impedance Imaging Research Center (IIRC), Kyung Hee University, 23 Kyungheedae-ro, Dongdaemun-gu, Seoul, 02447, Korea
| |
Collapse
|
9
|
Rose JC, Gehlen DB, Haraszti T, Köhler J, Licht CJ, De Laporte L. Biofunctionalized aligned microgels provide 3D cell guidance to mimic complex tissue matrices. Biomaterials 2018; 163:128-141. [PMID: 29459322 DOI: 10.1016/j.biomaterials.2018.02.001] [Citation(s) in RCA: 74] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/19/2017] [Revised: 02/01/2018] [Accepted: 02/02/2018] [Indexed: 12/27/2022]
Abstract
Natural healing is based on highly orchestrated processes, in which the extracellular matrix plays a key role. To resemble the native cell environment, we introduce an artificial extracellular matrix (aECM) with the capability to template hierarchical and anisotropic structures in situ, allowing a minimally-invasive application via injection. Synthetic, magnetically responsive, rod-shaped microgels are locally aligned and fixed by a biocompatible surrounding hydrogel, creating a hybrid anisotropic hydrogel (Anisogel), of which the physical, mechanical, and chemical properties can be tailored. The microgels are rendered cell-adhesive with GRGDS and incorporated either inside a cell-adhesive fibrin or bioinert poly(ethylene glycol) hydrogel to strongly interact with fibroblasts. GRGDS-modified microgels inside a fibrin-based Anisogel enhance fibroblast alignment and lead to a reduction in fibronectin production, indicating successful replacement of structural proteins. In addition, YAP-translocation to the nucleus increases with the concentration of microgels, indicating cellular sensing of the overall anisotropic mechanical properties of the Anisogel. For bioinert surrounding PEG hydrogels, GRGDS-microgels are required to support cell proliferation and fibronectin production. In contrast to fibroblasts, primary nerve growth is not significantly affected by the biomodification of the microgels. In conclusion, this approach opens new opportunities towards advanced and complex aECMs for tissue regeneration.
Collapse
Affiliation(s)
- Jonas C Rose
- DWI - Leibniz-Institute for Interactive Materials, Aachen, Germany
| | - David B Gehlen
- DWI - Leibniz-Institute for Interactive Materials, Aachen, Germany
| | - Tamás Haraszti
- DWI - Leibniz-Institute for Interactive Materials, Aachen, Germany
| | - Jens Köhler
- DWI - Leibniz-Institute for Interactive Materials, Aachen, Germany
| | | | - Laura De Laporte
- DWI - Leibniz-Institute for Interactive Materials, Aachen, Germany.
| |
Collapse
|
10
|
Pascual-Garrido C, Rodriguez-Fontan F, Aisenbrey EA, Payne KA, Chahla J, Goodrich LR, Bryant SJ. Current and novel injectable hydrogels to treat focal chondral lesions: Properties and applicability. J Orthop Res 2018; 36:64-75. [PMID: 28975658 PMCID: PMC5839960 DOI: 10.1002/jor.23760] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 06/14/2017] [Accepted: 09/22/2017] [Indexed: 02/04/2023]
Abstract
Focal chondral lesions and early osteoarthritis (OA) are responsible for progressive joint pain and disability in millions of people worldwide, yet there is currently no surgical joint preservation treatment available to fully restore the long term functionality of cartilage. Limitations of current treatments for cartilage defects have prompted the field of cartilage tissue engineering, which seeks to integrate engineering and biological principles to promote the growth of new cartilage to replace damaged tissue. Toward improving cartilage repair, hydrogel design has advanced in recent years to improve their utility. Injectable hydrogels have emerged as a promising scaffold due to their wide range of properties, the ability to encapsulate cells within the material, and their ability to provide cues for cell differentiation. Some of these advances include the development of improved control over in situ gelation (e.g., light), new techniques to process hydrogels (e.g., multi-layers), and better incorporation of biological signals (e.g., immobilization, controlled release, and tethering). This review summarises the innovative approaches to engineer injectable hydrogels toward cartilage repair. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:64-75, 2018.
Collapse
Affiliation(s)
| | | | - Elizabeth A. Aisenbrey
- Department of Chemical & Biological Engineering, University of Colorado Denver, Boulder, CO
| | - Karin A. Payne
- Department of Orthopedics, University of Colorado Anschutz Medical Campus, Aurora, CO
| | | | - Laurie R. Goodrich
- Department of Clinical Sciences and Orthopaedic Research Center, Colorado State University, Fort Collins, CO
| | - Stephanie J. Bryant
- Department of Chemical & Biological Engineering, University of Colorado Denver, Boulder, CO
| |
Collapse
|
11
|
Kim SE, Lee PW, Pokorski JK. Biologically Triggered Delivery of EGF from Polymer Fiber Patches. ACS Macro Lett 2017; 6:593-597. [PMID: 29250460 DOI: 10.1021/acsmacrolett.7b00212] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Wound healing is modulated by complex spatial and temporal regulation of growth factors within a wound site. Regenerative medicine seeks to generate materials that can mimic this environment for the healing of chronic or traumatic wounds. Herein, we report a programmed release of epidermal growth factor (EGF) from coextruded polymer fiber patches, which is triggered by the natural biological cascade of wound healing. Genetically engineered EGF containing a matrix metalloproteinase (MMP) cleavage site was covalently conjugated to a nonwoven poly(ε-caprolactone) (PCL) fiber mat fabricated by multilayered melt coextrusion. The genetically modified EGF showed rapid release in the presence of a biological trigger, MMP-9, while a control protein showed negligible release. The biologically responsive fiber mat dramatically enhanced proliferation and migration of human keratinocytes in the presence of MMP-9. This study describes the release of a critical wound-healing growth factor as triggered by the biology inherent in the healing process.
Collapse
Affiliation(s)
- Si-Eun Kim
- Department of Macromolecular
Science and Engineering, Case Western Reserve University, Case School of Engineering, Cleveland, Ohio 44106, United States
| | - Parker W. Lee
- Department of Macromolecular
Science and Engineering, Case Western Reserve University, Case School of Engineering, Cleveland, Ohio 44106, United States
| | - Jonathan K. Pokorski
- Department of Macromolecular
Science and Engineering, Case Western Reserve University, Case School of Engineering, Cleveland, Ohio 44106, United States
| |
Collapse
|
12
|
Moeinzadeh S, Shariati SRP, Kader S, Melero-Martin JM, Jabbari E. Devitalized Stem Cell Microsheets for Sustainable Release of Osteogenic and Vasculogenic Growth Factors and Regulation of Anti-Inflammatory Immune Response. ACTA ACUST UNITED AC 2017; 1. [PMID: 30221188 DOI: 10.1002/adbi.201600011] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
The objective of this work was to investigate the effect of devitalized human mesenchymal stem cells (hMSCs) and endothelial colony-forming cells (ECFCs) seeded on mineralized nanofiber microsheets on protein release, osteogenesis, vasculogenesis, and macrophage polarization. Calcium phosphate nanocrystals were grown on the surface of aligned, functionalized nanofiber microsheets. The microsheets were seeded with hMSCs, ECFCs, or a mixture of hMSCs+ECFCs, cultured for cell attachment, differentiated to the osteogenic or vasculogenic lineage, and devitalized by lyophilization. The release kinetic of total protein, bone morphogenetic protein-2 (BMP2), and vascular endothelial growth factor (VEGF) from the devitalized microsheets was measured. Next, hMSCs and/or ECFCs were seeded on the devitalized cell microsheets and cultured in the absence of osteo-/vasculo-inductive factors to determine the effect of devitalized cell microsheets on hMSC/ECFC differentiation. Human macrophages were seeded on the microsheets to determine the effect of devitalized cells on macrophage polarization. Based on the results, devitalized undifferentiated hMSC and vasculogenic-differentiated ECFC microsheets had highest sustained release of BMP2 and VEGF, respectively. The devitalized hMSC microsheets did not affect M2 macrophage polarization while vascular-differentiated, devitalized ECFC microsheets did not affect M1 polarization. Both groups stimulated higher M2 macrophage polarization compared to M1.
Collapse
Affiliation(s)
- Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Seyed Ramin Pajoum Shariati
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Safaa Kader
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA.,Department of Chemistry and Biochemistry, University of South Carolina, Columbia, SC 29208, USA
| | - Juan M Melero-Martin
- Department of Cardiac Surgery, Boston Children's Hospital, Boston, MA, 02115, USA
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| |
Collapse
|
13
|
Barati D, Kader S, Pajoum Shariati SR, Moeinzadeh S, Sawyer RH, Jabbari E. Synthesis and Characterization of Photo-Cross-Linkable Keratin Hydrogels for Stem Cell Encapsulation. Biomacromolecules 2017; 18:398-412. [DOI: 10.1021/acs.biomac.6b01493] [Citation(s) in RCA: 30] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
Affiliation(s)
- Danial Barati
- Biomimetic Materials and Tissue Engineering Laboratory, Department
of Chemical Engineering, ‡Department of Chemistry and Biochemistry, and §Department of Biological
Sciences, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Safaa Kader
- Biomimetic Materials and Tissue Engineering Laboratory, Department
of Chemical Engineering, ‡Department of Chemistry and Biochemistry, and §Department of Biological
Sciences, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Seyed Ramin Pajoum Shariati
- Biomimetic Materials and Tissue Engineering Laboratory, Department
of Chemical Engineering, ‡Department of Chemistry and Biochemistry, and §Department of Biological
Sciences, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratory, Department
of Chemical Engineering, ‡Department of Chemistry and Biochemistry, and §Department of Biological
Sciences, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Roger H. Sawyer
- Biomimetic Materials and Tissue Engineering Laboratory, Department
of Chemical Engineering, ‡Department of Chemistry and Biochemistry, and §Department of Biological
Sciences, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratory, Department
of Chemical Engineering, ‡Department of Chemistry and Biochemistry, and §Department of Biological
Sciences, University of South Carolina, Columbia, South Carolina 29208, United States
| |
Collapse
|
14
|
Kesireddy V, Kasper FK. Approaches for building bioactive elements into synthetic scaffolds for bone tissue engineering. J Mater Chem B 2016; 4:6773-6786. [PMID: 28133536 PMCID: PMC5267491 DOI: 10.1039/c6tb00783j] [Citation(s) in RCA: 44] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
Bone tissue engineering (BTE) is emerging as a possible solution for regeneration of bone in a number of applications. For effective utilization, BTE scaffolds often need modifications to impart biological cues that drive diverse cellular functions such as adhesion, migration, survival, proliferation, differentiation, and biomineralization. This review provides an outline of various approaches for building bioactive elements into synthetic scaffolds for BTE and classifies them broadly under two distinct schemes; namely, the top-down approach and the bottom-up approach. Synthetic and natural routes for top-down approaches to production of bioactive constructs for BTE, such as generation of scaffold-extracellular matrix (ECM) hybrid constructs or decellularized and demineralized scaffolds, are provided. Similarly, traditional scaffold-based bottom-up approaches, including growth factor immobilization or peptide-tethered scaffolds, are provided. Finally, a brief overview of emerging bottom-up approaches for generating biologically active constructs for BTE is given. A discussion of the key areas for further investigation, challenges, and opportunities is also presented.
Collapse
Affiliation(s)
- Venu Kesireddy
- Department of Orthodontics, The University of Texas Health Science Center at Houston, School of Dentistry
| | - F. Kurtis Kasper
- Department of Orthodontics, The University of Texas Health Science Center at Houston, School of Dentistry
| |
Collapse
|
15
|
Amer LD, Bryant SJ. The In Vitro and In Vivo Response to MMP-Sensitive Poly(Ethylene Glycol) Hydrogels. Ann Biomed Eng 2016; 44:1959-69. [PMID: 27080375 PMCID: PMC5577801 DOI: 10.1007/s10439-016-1608-4] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2016] [Accepted: 04/02/2016] [Indexed: 12/28/2022]
Abstract
Enzyme-sensitive hydrogels are a promising class of materials for cell encapsulation and tissue engineering because their ability to be degraded by cell-secreted factors. However, it is well known that nearly all synthetic biomaterials elicit a foreign body response (FBR) upon implantation. Therefore, this study aimed to evaluate the in vitro and in vivo response to an enzyme-sensitive hydrogel. Hydrogels were formed from poly(ethylene glycol) with the peptide crosslinker, C-VPLS↓LYSG-C, which is susceptible to matrix metalloproteinases 2 and 9. We evaluated the hydrogel by exogenously delivered enzymes, encapsulated mesenchymal stem cells as a tissue engineering relevant cell type, and by macrophage-secreted factors in vitro and for the FBR through macrophage attachment in vitro and in a subcutaneous mouse model. These hydrogels rapidly degraded upon exposure to exogenous MMP-2 and to lesser degree with MMP-9. Encapsulated mesenchymal stem cells were capable of degrading the hydrogels via matrix metalloproteinases. Inflammatory macrophages were confirmed to attach to the hydrogels, but were not capable of rapidly degrading the hydrogels. In vivo, these hydrogels remained intact after 4 weeks and exhibited a classic FBR with inflammatory cells at the hydrogel surface and a fibrous capsule. In summary, these findings suggest that while this MMP-2/9 sensitive hydrogel is readily degraded in vitro, it does not undergo rapid degradation by the FBR. Thus, the long term stability of these hydrogels in vivo coupled with the ability for encapsulated cells to degrade the hydrogel makes them promising materials for tissue engineering.
Collapse
Affiliation(s)
- Luke D Amer
- Department of Chemical and Biological Engineering, University of Colorado, 3415 Colorado Ave, UCB 596, Boulder, CO, 80303, USA
- BioFrontiers Institute, University of Colorado, 3415 Colorado Avenue, Boulder, CO, 80303, USA
| | - Stephanie J Bryant
- Department of Chemical and Biological Engineering, University of Colorado, 3415 Colorado Ave, UCB 596, Boulder, CO, 80303, USA.
- BioFrontiers Institute, University of Colorado, 3415 Colorado Avenue, Boulder, CO, 80303, USA.
- Material Science and Engineering Program, University of Colorado, 3415 Colorado Avenue, Boulder, CO, 80303, USA.
| |
Collapse
|
16
|
Yan S, Zhang X, Zhang K, Di H, Feng L, Li G, Fang J, Cui L, Chen X, Yin J. Injectable in situ forming poly(l-glutamic acid) hydrogels for cartilage tissue engineering. J Mater Chem B 2016; 4:947-961. [PMID: 32263168 DOI: 10.1039/c5tb01488c] [Citation(s) in RCA: 65] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
Injectable, in situ forming hydrogels have exhibited many advantages in regenerative medicine. Herein, we present the novel design of poly(l-glutamic acid) injectable hydrogels via the self-crosslinking of adipic dihydrazide (ADH)-modified poly(l-glutamic acid) (PLGA-ADH) and aldehyde-modified poly(l-glutamic acid) (PLGA-CHO), and investigate their potential in cartilage tissue engineering. Both the hydrazide modification degree of PLGA-ADH and oxidation degree of PLGA-CHO can be adjusted by the amount of activators and sodium periodate, respectively. Experiments reveal that the solid content of the hydrogels, -NH2/-CHO molar ratio, and oxidation degree of PLGA-CHO have a great effect on the gelation time, equilibrium swelling, mechanical properties, microscopic morphology, and in vitro degradation of the hydrogels. Encapsulation of rabbit chondrocytes within the hydrogels showed viability of the entrapped cells and cytocompatibility of the injectable hydrogels. A preliminary study exhibits injectability and rapid in vivo gel formation, as well as mechanical stability, cell ingrowth, and ectopic cartilage formation. These results suggest that the PLGA hydrogel has potential as an injectable cell delivery carrier for cartilage regeneration and could serve as a new biomaterial for tissue engineering.
Collapse
Affiliation(s)
- Shifeng Yan
- Department of Polymer Materials, Shanghai University, 333 Nanchen Road, Shanghai 200444, People's Republic of China.
| | | | | | | | | | | | | | | | | | | |
Collapse
|
17
|
Barati D, Shariati SRP, Moeinzadeh S, Melero-Martin JM, Khademhosseini A, Jabbari E. Spatiotemporal release of BMP-2 and VEGF enhances osteogenic and vasculogenic differentiation of human mesenchymal stem cells and endothelial colony-forming cells co-encapsulated in a patterned hydrogel. J Control Release 2015; 223:126-136. [PMID: 26721447 DOI: 10.1016/j.jconrel.2015.12.031] [Citation(s) in RCA: 108] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2015] [Revised: 11/30/2015] [Accepted: 12/16/2015] [Indexed: 01/02/2023]
Abstract
Reconstruction of large bone defects is limited by insufficient vascularization and slow bone regeneration. The objective of this work was to investigate the effect of spatial and temporal release of recombinant human bone morphogenetic protein-2 (BMP2) and vascular endothelial growth factor (VEGF) on the extent of osteogenic and vasculogenic differentiation of human mesenchymal stem cells (hMSCs) and endothelial colony-forming cells (ECFCs) encapsulated in a patterned hydrogel. Nanogels (NGs) based on polyethylene glycol (PEG) macromers chain-extended with short lactide (L) and glycolide (G) segments were used for grafting and timed-release of BMP2 and VEGF. NGs with 12kDa PEG molecular weight (MW), 24 LG segment length, and 60/40L/G ratio (P12-II, NG(10)) released the grafted VEGF in 10days. NGs with 8kDa PEG MW, 26 LG segment length, and 60/40L/G ratio (P8-I, NG(21)) released the grafted BMP2 in 21days. hMSCs and NG-BMP2 were encapsulated in a patterned matrix based on acrylate-functionalized lactide-chain-extended star polyethylene glycol (SPELA) hydrogel and microchannel patterns filled with a suspension of hMSCs+ECFCs and NG-VEGF in a crosslinked gelatin methacryloyl (GelMA) hydrogel. Groups included patterned constructs without BMP2/VEGF (None), with directly added BMP2/VEGF, and NG-BMP2/NG-VEGF. Based on the results, timed-release of VEGF in the microchannels in 10days from NG(10) and BMP2 in the matrix in 21days from NG(21) resulted in highest extent of osteogenic and vasculogenic differentiation of the encapsulated hMSCs and ECFCs compared to direct addition of VEGF and BMP2. Further, timed-release of VEGF from NG(10) in hMSC+ECFC encapsulating microchannels and BMP2 from NG(21) in hMSC encapsulating matrix sharply increased bFGF expression in the patterned constructs. The results suggest that mineralization and vascularization are coupled by localized secretion of paracrine signaling factors by the differentiating hMSCs and ECFCs.
Collapse
Affiliation(s)
- Danial Barati
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Seyed Ramin Pajoum Shariati
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Juan M Melero-Martin
- Department of Cardiac Surgery, Boston Children's Hospital, Boston, MA 02115, USA
| | - Ali Khademhosseini
- Biomaterials Innovation Research Center, Division of Biomedical Engineering, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Boston 02139, MA, USA; Harvard-Massachusetts Institute of Technology Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge 02139, MA, USA; Wyss Institute for Biologically Inspired Engineering, Harvard University, Boston 02115, MA, USA; Department of Bioindustrial Technologies, College of Animal Bioscience and Technology, Konkuk University, Hwayangdong, Gwangjin-gu, Seoul 143-701, Republic of Korea
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA.
| |
Collapse
|
18
|
Barati D, Walters JD, Shariati SRP, Moeinzadeh S, Jabbari E. Effect of organic acids on calcium phosphate nucleation and osteogenic differentiation of human mesenchymal stem cells on peptide functionalized nanofibers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2015; 31:5130-5140. [PMID: 25879768 DOI: 10.1021/acs.langmuir.5b00615] [Citation(s) in RCA: 25] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Carboxylate-rich organic acids play an important role in controlling the growth of apatite crystals and the extent of mineralization in the natural bone. The objective of this work was to investigate the effect of organic acids on calcium phosphate (CaP) nucleation on nanofiber microsheets functionalized with a glutamic acid peptide and osteogenic differentiation of human mesenchymal stem cells (hMSCs) seeded on the CaP-nucleated microsheets. High molecular weight poly(dl-lactide) (DL-PLA) was mixed with low molecular weight L-PLA conjugated with Glu-Glu-Gly-Gly-Cys peptide, and the mixture was electrospun to generate aligned nanofiber microsheets. The nanofiber microsheets were incubated in a modified simulated body fluid (mSBF) supplemented with different organic acids for nucleation and growth of CaP crystals on the nanofibers. Organic acids included citric acid (CA), hydroxycitric acid (HCA), tartaric acid (TART), malic acid (MA), ascorbic acid (AsA), and salicylic acid (SalA). HCA microsheets had the highest CaP content at 240 ± 10% followed by TART and CA with 225 ± 8% and 225 ± 10%, respectively. The Ca/P ratio and percent crystallinity of the nucleated CaP in TART microsheets was closest to that of stoichiometric hydroxyapatite. The extent of CaP nucleation and growth on the nanofiber microsheets depended on the acidic strength and number of hydrogen-bonding hydroxyl groups of the organic acids. Compressive modulus and degradation of the CaP nucleated microsheets were related to percent crystallinity and CaP content. Osteogenic differentiation of hMSCs seeded on the microsheets and cultured in osteogenic medium increased only for those microsheets nucleated with CaP by incubation in CA or AsA-supplemented mSBF. Further, only CA microsheets stimulated bone nodule formation by the seeded hMSCs.
Collapse
Affiliation(s)
- Danial Barati
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Joshua D Walters
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Seyed Ramin Pajoum Shariati
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| |
Collapse
|
19
|
Fonseca KB, Granja PL, Barrias CC. Engineering proteolytically-degradable artificial extracellular matrices. Prog Polym Sci 2014. [DOI: 10.1016/j.progpolymsci.2014.07.003] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
|
20
|
Three-dimensional biomaterial degradation — Material choice, design and extrinsic factor considerations. Biotechnol Adv 2014; 32:984-99. [DOI: 10.1016/j.biotechadv.2014.04.014] [Citation(s) in RCA: 51] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2014] [Revised: 04/18/2014] [Accepted: 04/30/2014] [Indexed: 11/20/2022]
|
21
|
Barati D, Moeinzadeh S, Karaman O, Jabbari E. Time Dependence of Material Properties of Polyethylene Glycol Hydrogels Chain Extended with Short Hydroxy Acid Segments. POLYMER 2014; 55:3894-3904. [PMID: 25267858 DOI: 10.1016/j.polymer.2014.05.045] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
Abstract
The objective of this work was to investigate the effect of chemical composition and segment number (n) on gelation, stiffness, and degradation of hydroxy acid-chain-extended star polyethylene glycol acrylate (SPEXA) gels. The hydroxy acids included glycolide (G,), L-lactide (L), p-dioxanone (D) and -caprolactone (C). Chain-extension generated water soluble macromers with faster gelation rates, lower sol fractions, higher compressive moduli, and a wide-ranging degradation times when crosslinked into a hydrogel. SPEGA gels with the highest fraction of inter-molecular crosslinks had the most increase in compressive modulus with n whereas SPELA and SPECA had the lowest increase in modulus. SPEXA gels exhibited a wide range of degradation times from a few days for SPEGA to a few weeks for SPELA, a few months for SPEDA, and many months for SPECA. Marrow stromal cells and endothelial progenitor cells had the highest expression of vasculogenic markers when co-encapsulated in the faster degrading SPELA gel.
Collapse
Affiliation(s)
- Danial Barati
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Ozan Karaman
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| |
Collapse
|
22
|
Synthesis and characterization of novel elastomeric poly(D,L-lactide urethane) maleate composites for bone tissue engineering. Eur Polym J 2013; 49:3337-3349. [PMID: 24817764 DOI: 10.1016/j.eurpolymj.2013.07.004] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
Abstract
Here, we report the synthesis and characterization of a novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its composites with nano-hydroxyapatite (nHA) as potential weight-bearing composite. The 4PLAUMA/nHA ratios of the composites were 1:3, 2:5, 1:2 and 1:1. FTIR and NMR characterization showed urethane and maleate units integrated into the PLA matrix. Energy dispersion and Auger electron spectroscopy confirmed homogeneous distribution of nHA in the polymer matrix. Maximum moduli and strength of the composites of 4PLAUMA/nHA, respectively, are 1973.31 ± 298.53 MPa and 78.10 ± 3.82 MPa for compression, 3630.46 ± 528.32 MPa and 6.23 ± 1.44 MPa for tension, 1810.42 ± 86.10 MPa and 13.00 ± 0.72 for bending, and 282.46 ± 24.91 MPa and 5.20 ± 0.85 MPa for torsion. The maximum tensile strains of the polymer and composites are in the range of 5% to 93%, and their maximum torsional strains vary from 0.26 to 0.90. The composites exhibited very slow degradation rates in aqueous solution, from approximately 50% mass remaining for the pure polymer to 75% mass remaining for composites with high nHA contents, after a period of 8 weeks. Increase in ceramic content increased mechanical properties, but decreased maximum strain, degradation rate, and swelling of the composites. Human bone marrow stem cells and human endothelial cells adhered and proliferated on 4PLAUMA films and degradation products of the composites showed little-to-no toxicity. These results demonstrate that novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its nHA composites may have potential applications in regenerative medicine.
Collapse
|
23
|
Moeinzadeh S, Barati D, Sarvestani SK, Karaman O, Jabbari E. Nanostructure formation and transition from surface to bulk degradation in polyethylene glycol gels chain-extended with short hydroxy acid segments. Biomacromolecules 2013; 14:2917-28. [PMID: 23859006 DOI: 10.1021/bm4008315] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023]
Abstract
Degradable, in situ gelling, inert hydrogels with tunable properties are very attractive as a matrix for cell encapsulation and delivery to the site of regeneration. Cell delivery is generally limited by the toxicity of gelation and degradation reactions. The objective of this work was to investigate by simulation and experimental measurement gelation kinetics and degradation rate of star acrylated polyethylene glycol (PEG) macromonomers chain-extended with short hydroxy acid (HA) segments (SPEXA) as a function of HA monomer type and number of HA repeat units. HA monomers included least hydrophobic glycolide (G), lactide (L), p-dioxanone (D), and most hydrophobic ε-caprolactone (C). Chain extension of PEG with short HA segments resulted in micelle formation for all HA types. There was a significant decrease in gelation time of SPEXA precursor solutions with HA chain-extension for all HA types due to micelle formation, consistent with the simulated increase in acrylate-acrylate (Ac-Ac) and Ac-initiator integration numbers. The hydrolysis rate of SPEXA hydrogels was strongly dependent on HA type and number of HA repeat units. SPEXA gels chain-extended with the least hydrophobic glycolide completely degraded within days, lactide within weeks, and p-dioxanone and ε-caprolactone degraded within months. The wide range of degradation rates observed for SPEXA gels can be explained by large differences in equilibrium water content of the micelles for different HA monomer types. A biphasic relationship between HA segment length and gel degradation rate was observed for all HA monomers, which was related to the transition from surface (controlled by HA segment length) to bulk (controlled by micelle equilibrium water content) hydrolysis within the micelle phase. To our knowledge, this is the first report on transition from surface to bulk degradation at the nanoscale in hydrogels.
Collapse
Affiliation(s)
- Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, 29208, United States
| | | | | | | | | |
Collapse
|
24
|
Karaman O, Kumar A, Moeinzadeh S, He X, Cui T, Jabbari E. Effect of surface modification of nanofibres with glutamic acid peptide on calcium phosphate nucleation and osteogenic differentiation of marrow stromal cells. J Tissue Eng Regen Med 2013; 10:E132-46. [PMID: 23897753 DOI: 10.1002/term.1775] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2012] [Revised: 03/22/2013] [Accepted: 04/16/2013] [Indexed: 01/01/2023]
Abstract
Biomineralization is mediated by extracellular matrix (ECM) proteins with amino acid sequences rich in glutamic acid. The objective of this study was to investigate the effect of calcium phosphate deposition on aligned nanofibres surface-modified with a glutamic acid peptide on osteogenic differentiation of rat marrow stromal cells. Blend of EEGGC peptide (GLU) conjugated low molecular weight polylactide (PLA) and high molecular weight poly(lactide-co-glycolide) (PLGA) was electrospun to form aligned nanofibres (GLU-NF). The GLU-NF microsheets were incubated in a modified simulated body fluid for nucleation of calcium phosphate crystals on the fibre surface. To achieve a high calcium phosphate to fibre ratio, a layer-by-layer approach was used to improve diffusion of calcium and phosphate ions inside the microsheets. Based on dissipative particle dynamics simulation of PLGA/PLA-GLU fibres, > 80% of GLU peptide was localized to the fibre surface. Calcium phosphate to fibre ratios as high as 200%, between those of cancellous (160%) and cortical (310%) bone, was obtained with the layer-by-layer approach. The extent of osteogenic differentiation and mineralization of marrow stromal cells seeded on GLU-NF microsheets was directly related to the amount of calcium phosphate deposition on the fibres prior to cell seeding. Expression of osteogenic markers osteopontin, alkaline phosphatase (ALP), osteocalcin and type 1 collagen increased gradually with calcium phosphate deposition on GLU-NF microsheets. Results demonstrate that surface modification of aligned synthetic nanofibres with EEGGC peptide dramatically affects nucleation and growth of calcium phosphate crystals on the fibres leading to increased osteogenic differentiation of marrow stromal cells and mineralization.
Collapse
Affiliation(s)
- Ozan Karaman
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA
| | - Ankur Kumar
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA
| | - Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA
| | - Xuezhong He
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA
| | - Tong Cui
- Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, SC, USA
| |
Collapse
|
25
|
Leight JL, Alge DL, Maier AJ, Anseth KS. Direct measurement of matrix metalloproteinase activity in 3D cellular microenvironments using a fluorogenic peptide substrate. Biomaterials 2013; 34:7344-52. [PMID: 23830581 DOI: 10.1016/j.biomaterials.2013.06.023] [Citation(s) in RCA: 47] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2013] [Accepted: 06/12/2013] [Indexed: 12/21/2022]
Abstract
Incorporation of degradable moieties into synthetic hydrogels has greatly increased the utility of these three-dimensional matrices for in vitro cell culture as well as tissue engineering applications. A common method for introducing degradability is the inclusion of oligopeptides sensitive to cleavage by matrix metalloproteinases (MMPs), enabling cell-mediated remodeling and migration within the material. While this strategy has been effective, characterization and measurement of cell-mediated degradation in these materials has remained challenging. There are 20+ MMP family members whose activity is regulated in space and time by a number of biochemical and biophysical cues. Thus, the typical approach of characterizing cleavage of degradable moieties in solution with recombinant enzymes does not easily translate to three-dimensional cell-mediated matrix remodeling. To address this challenge, we report here the synthesis of a cell-laden hydrogel matrix functionalized with a fluorogenic peptide substrate to provide real-time, quantitative monitoring of global MMP activity. Using this system, stimulation of MMP activity was observed with growth factor treatment in mammary epithelial cells and compared to classical zymography results. Further, the effect of biophysical cues on MMP activity of human mesenchymal stem cells was also investigated where more rigid hydrogels were observed to increase MMP activity. The regulation of MMP activity by these biochemical and biophysical cues highlights the need for in situ, real-time measurement of hydrogel degradation, and use of these functionalized hydrogels will aid in future rational design of degradable synthetic hydrogels for in vitro cell studies and tissue engineering applications.
Collapse
Affiliation(s)
- Jennifer L Leight
- Howard Hughes Medical Institute and the BioFrontiers Institute, University of Colorado at Boulder, Boulder, CO 80309, USA
| | | | | | | |
Collapse
|
26
|
Page JM, Harmata AJ, Guelcher SA. Design and development of reactive injectable and settable polymeric biomaterials. J Biomed Mater Res A 2013; 101:3630-45. [DOI: 10.1002/jbm.a.34665] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/27/2012] [Revised: 02/05/2013] [Accepted: 02/14/2013] [Indexed: 12/21/2022]
Affiliation(s)
- Jonathan M. Page
- Department of Chemical and Biomolecular Engineering; Vanderbilt University; Nashville Tennessee
- Center for Bone Biology; Department of Medicine; Vanderbilt University Medical Center; Nashville Tennessee
| | - Andrew J. Harmata
- Department of Chemical and Biomolecular Engineering; Vanderbilt University; Nashville Tennessee
- Center for Bone Biology; Department of Medicine; Vanderbilt University Medical Center; Nashville Tennessee
| | - Scott A. Guelcher
- Department of Chemical and Biomolecular Engineering; Vanderbilt University; Nashville Tennessee
- Center for Bone Biology; Department of Medicine; Vanderbilt University Medical Center; Nashville Tennessee
- Department of Biomedical Engineering; Vanderbilt University; Nashville Tennessee
| |
Collapse
|
27
|
Vats K, Benoit DSW. Dynamic manipulation of hydrogels to control cell behavior: a review. TISSUE ENGINEERING PART B-REVIEWS 2013; 19:455-69. [PMID: 23541134 DOI: 10.1089/ten.teb.2012.0716] [Citation(s) in RCA: 51] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
For many tissue engineering applications and studies to understand how materials fundamentally affect cellular functions, it is important to have the ability to synthesize biomaterials that can mimic elements of native cell-extracellular matrix interactions. Hydrogels possess many properties that are desirable for studying cell behavior. For example, hydrogels are biocompatible and can be biochemically and mechanically altered by exploiting the presentation of cell adhesive epitopes or by changing hydrogel crosslinking density. To establish physical and biochemical tunability, hydrogels can be engineered to alter their properties upon interaction with external driving forces such as pH, temperature, electric current, as well as exposure to cytocompatible irradiation. Additionally, hydrogels can be engineered to respond to enzymes secreted by cells, such as matrix metalloproteinases and hyaluronidases. This review details different strategies and mechanisms by which biomaterials, specifically hydrogels, can be manipulated dynamically to affect cell behavior. By employing the appropriate combination of stimuli and hydrogel composition and architecture, cell behavior such as adhesion, migration, proliferation, and differentiation can be controlled in real time. This three-dimensional control in cell behavior can help create programmable cell niches that can be useful for fundamental cell studies and in a variety of tissue engineering applications.
Collapse
Affiliation(s)
- Kanika Vats
- 1 Department of Biomedical Engineering, University of Rochester , Rochester, New York
| | | |
Collapse
|
28
|
Jabbari E, Yang X, Moeinzadeh S, He X. Drug release kinetics, cell uptake, and tumor toxicity of hybrid VVVVVVKK peptide-assembled polylactide nanoparticles. Eur J Pharm Biopharm 2012; 84:49-62. [PMID: 23275111 DOI: 10.1016/j.ejpb.2012.12.012] [Citation(s) in RCA: 24] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/22/2012] [Revised: 12/09/2012] [Accepted: 12/12/2012] [Indexed: 12/16/2022]
Abstract
An exciting approach to tumor delivery is encapsulation of the drug in self-assembled polymer-peptide nanoparticles. The objective of this work was to synthesize a conjugate of low molecular weight polylactide (LMW PLA) and V6K2 peptide and investigate self-assembly, drug release kinetics, cell uptake and toxicity, drug pharmacokinetics, and tumor cell invasion with Doxorubicin (DOX) or paclitaxel (PTX). The results for PLA-V6K2 self-assembled NPs were compared with those of polyethylene glycol stabilized PLA (PLA-EG) NPs. The size of PLA-V6K2 and PLA-EG NPs was 100 ± 20 and 130 ± 50 nm, respectively, with polydispersity index of 1.04 and 1.14. The encapsulation efficiency of DOX in PLA-V6K2 and PLA-EG NPs was 44 ± 9% and 55 ± 5%, respectively, and that of PTX was >90 for both NP types. The release of DOX and PTX from PLA-V6K2 was slower than that of PLA-EG, and the release rate was relatively constant with time. Based on molecular dynamic simulation, the less hydrophobic DOX was distributed in the lactide core as well as the peptide shell, while the hydrophobic PTX was localized mainly to the lactide core. PLA-V6K2 NPs had significantly higher cell uptake by 4T1 mouse breast carcinoma cells compared to PLA-EG NPs, which was attributed to the electrostatic interactions between the peptide and negatively charged moieties on the cell membrane. PLA-V6K2 NPs showed no toxicity to marrow stromal cells. DOX-loaded PLA-V6K2 NPs showed higher toxicity to 4T1 cells and the DNA damage response, and apoptosis was delayed compared to the free DOX. DOX or PTX encapsulated in PLA-V6K2 NPs significantly reduced invasion of 4T1 cells compared to those cells treated with the drug in PLA-EG NPs. Invasion of 4T1 cells treated with DOX in PLA-V6K2 and PLA-EG NPs was 5 ± 1% and 30 ± 5%, respectively, and that of PTX was 11 ± 2% and 40 ± 7%. The AUC of DOX in PLA-V6K2 NPs was 67% and 21% higher than those of free DOX and PLA-EG NPs, respectively. DOX-loaded PLA-V6K2 NPs injected in C3HeB/FeJ mice inoculated with MTCL syngeneic breast cancer cells displayed higher tumor toxicity than PLA-EG NPs and lower host toxicity than the free DOX. Cationic PLA-V6K2 NPs with higher tumor toxicity than the PLA-EG NPs are potentially useful in chemotherapy.
Collapse
Affiliation(s)
- Esmaiel Jabbari
- Department of Chemical Engineering, University of South Carolina, SC 29208, United States.
| | | | | | | |
Collapse
|
29
|
Yang X, Sarvestani SK, Moeinzadeh S, He X, Jabbari E. Three-dimensional-engineered matrix to study cancer stem cells and tumorsphere formation: effect of matrix modulus. Tissue Eng Part A 2012; 19:669-84. [PMID: 23013450 DOI: 10.1089/ten.tea.2012.0333] [Citation(s) in RCA: 58] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023] Open
Abstract
Maintenance of cancer stem cells (CSCs) is regulated by the tumor microenvironment. Synthetic hydrogels provide the flexibility to design three-dimensional (3D) matrices to isolate and study individual factors in the tumor microenvironment. The objective of this work was to investigate the effect of matrix modulus on tumorsphere formation by breast cancer cells and maintenance of CSCs in an inert microenvironment without the interference of other factors. In that regard, 4T1 mouse breast cancer cells were encapsulated in inert polyethylene glycol diacrylate hydrogels and the effect of matrix modulus on tumorsphere formation and expression of CSC markers was investigated. The gel modulus had a strong effect on tumorsphere formation and the effect was bimodal. Tumorsphere formation and expression of CSC markers peaked after 8 days of culture. At day 8, as the matrix modulus was increased from 2.5 kPa to 5.3, 26.1, and 47.1 kPa, the average tumorsphere size changed from 37±6 μm to 57±6, 20±4, and 12±2 μm, respectively; cell number density in the gel changed from 0.8±0.1×10⁵ cells/mL to 1.7±0.2×10⁵, 0.4±0.1×10⁵, and 0.2±0.1×10⁵ cells/mL after initial encapsulation of 0.14×10⁵ cells/mL; and the expression of CD44 breast CSC marker changed from 17±4-fold to 38±9-, 3±1-, and 2±1-fold increase compared with the initial level. Similar results were obtained with MCF7 human breast carcinoma cells. Mouse 4T1 and human MCF7 cells encapsulated in the gel with 5.3 kPa modulus formed the largest tumorspheres and highest density of tumorspheres, and had highest expression of breast CSC markers CD44 and ABCG2. The inert polyethylene glycol hydrogel can be used as a model-engineered 3D matrix to study the role of individual factors in the tumor microenvironment on tumorigenesis and maintenance of CSCs without the interference of other factors.
Collapse
Affiliation(s)
- Xiaoming Yang
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina, USA
| | | | | | | | | |
Collapse
|
30
|
Melchels FP, Domingos MA, Klein TJ, Malda J, Bartolo PJ, Hutmacher DW. Additive manufacturing of tissues and organs. Prog Polym Sci 2012. [DOI: 10.1016/j.progpolymsci.2011.11.007] [Citation(s) in RCA: 833] [Impact Index Per Article: 69.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
31
|
Mercado AE, Yang X, He X, Jabbari E. Effect of grafting BMP2-derived peptide to nanoparticles on osteogenic and vasculogenic expression of stromal cells. J Tissue Eng Regen Med 2012; 8:15-28. [PMID: 22764116 DOI: 10.1002/term.1487] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2011] [Revised: 01/05/2012] [Accepted: 01/19/2012] [Indexed: 12/21/2022]
Abstract
Bone morphogenetic protein-2 (BMP2) plays a major role in initiating the cascade of osteogenesis. However, high doses of exogenous BMP2 coupled with diffusion away from the intended site cause adverse side-effects. An alternative is to use biodegradable polymeric nanoparticles (NPs) grafted with peptides of the active domains of BMP2. NPs present a multivalent form of the peptide for stronger interaction with cell surface receptors, leading to a stronger activation of osteogenic signalling pathways. The objective of this work was to compare osteogenic activity of the BMP2 peptide (BMP2Pe), corresponding to residues 73-92 of BMP2 protein (BMP2Pr), grafted to biodegradable NPs with that of BMP2 protein (BMP2Pr). BMP2Pe was functionalized with a cysteine residue and grafted to poly(lactide fumarate) and poly(lactide-co-ethylene oxide fumarate) (PLAF/PLEOF) NPs via a thioether link. The calcium content of bone marrow stromal (BMS) cells cultured in osteogenic medium supplemented with BMP2 peptide/protein-grafted NPs (BMP2Pe-gNP and BMP2Pr-gNP) was slightly higher than other BMP2-treated groups, but all osteogenic groups showed similar levels of mineralization after 21 days. The expression pattern of master transcription factors Dlx5 and Runx2 indicated that BMP2 protein induced faster osteogenic signalling than the BMP peptide. The expression level of Osteopontin (OP), Osteocalcin (OC) and PECAM-1 in the NP-grafted BMP2 groups was significantly higher than those of ungrafted BMP2Pr and BMP2Pe groups, which may be due to a more effective presentation of the peptide/protein to cell surface receptors, thus leading to a stronger interaction of the peptide/protein with clustered cell surface receptors.
Collapse
Affiliation(s)
- Angel E Mercado
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC, 29208, USA
| | | | | | | |
Collapse
|
32
|
Moeinzadeh S, Barati D, He X, Jabbari E. Gelation characteristics and osteogenic differentiation of stromal cells in inert hydrolytically degradable micellar polyethylene glycol hydrogels. Biomacromolecules 2012; 13:2073-86. [PMID: 22642902 DOI: 10.1021/bm300453k] [Citation(s) in RCA: 37] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
Abstract
The use of poly(ethylene glycol) (PEG) hydrogels in tissue engineering is limited by their persistence in the site of regeneration. In an attempt to produce inert hydrolytically degradable PEG-based hydrogels, star (SPELA) poly(ethylene glycol-co-lactide) acrylate macromonomers with short lactide segments (<15 lactides per macromonomer) were synthesized. The SPELA hydrogel was characterized with respect to gelation time, modulus, water content, sol fraction, degradation, and osteogenic differentiation of encapsulated marrow stromal cells (MSCs). The properties of SPELA hydrogel were compared with those of the linear poly(ethylene glycol-co-lactide) acrylate (LPELA). The SPELA hydrogel had higher modulus, lower water content, and lower sol fraction than the LPELA. The shear modulus of SPELA hydrogel was 2.2 times higher than LPELA, whereas the sol fraction of SPELA hydrogel was 5 times lower than LPELA. The degradation of SPELA hydrogel depended strongly on the number of lactide monomers per macromonomer (nL) and showed a biphasic behavior. For example, as nL increased from 0 to 3.4, 6.4, 11.6, and 14.8, mass loss increased from 7 to 37, 80, 100% and then deceased to 87%, respectively, after 6 weeks of incubation. The addition of 3.4 lactides per macromonomer (<10 wt % dry macromonomer or <2 wt % swollen hydrogel) increased mass loss to 50% after 6 weeks. Molecular dynamic simulations demonstrated that the biphasic degradation behavior was related to aggregation and micelle formation of lactide monomers in the macromonomer in aqueous solution. MSCs encapsulated in SPELA hydrogel expressed osteogenic markers Dlx5, Runx2, osteopontin, and osteocalcin and formed a mineralized matrix. The expression of osteogenic markers and extent of mineralization was significantly higher when MSCs were encapsulated in SPELA hydrogel with the addition of bone morphogenetic protein-2 (BMP2). Results demonstrate that hydrolytically degradable PEG-based hydrogels are potentially useful as a delivery matrix for stem cells in regenerative medicine.
Collapse
Affiliation(s)
- Seyedsina Moeinzadeh
- Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| | | | | | | |
Collapse
|
33
|
Abstract
This protocol describes the synthesis of oligo(poly(ethylene glycol) fumarate) (OPF; 1-35 kDa; a polymer useful for tissue engineering applications) by a one-pot reaction of poly(ethylene glycol) (PEG) and fumaryl chloride. The procedure involves three parts: dichloromethane and PEG are first dried; the reaction step follows, in which fumaryl chloride and triethylamine are added dropwise to a solution of PEG in dichloromethane; and finally, the product solution is filtered to remove by-product salt, and the OPF product is twice crystallized, washed and dried under vacuum. The reaction is affected by the molecular weight of PEG and reactant molar ratio. The OPF product is cross-linked by radical polymerization by either a thermally induced or ultraviolet-induced radical initiator, and the physical properties of the OPF oligomer and resulting cross-linked hydrogel are easily tailored by varying PEG molecular weight. OPF hydrogels are injectable, they polymerize in situ and they undergo biodegradation by hydrolysis of ester bonds. The expected time required to complete this protocol is 6 d.
Collapse
|
34
|
Xu W, He X, Sarvestani AS, Jabbari E. Effect of a low-molecular-weight cross-linkable macromer on electrospinning of poly(lactide-co-glycolide) fibers. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION 2012; 18:1369-85. [DOI: 10.1163/156856207782246821] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Affiliation(s)
- Weijie Xu
- a Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, Swearingen Engineering Center, Rm 2C11, University of South Carolina, Columbia, SC 29208, USA
| | - Xuezhong He
- b Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, Swearingen Engineering Center, Rm 2C11, University of South Carolina, Columbia, SC 29208, USA
| | - Alireza S. Sarvestani
- c Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, Swearingen Engineering Center, Rm 2C11, University of South Carolina, Columbia, SC 29208, USA
| | - Esmaiel Jabbari
- d Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, Swearingen Engineering Center, Rm 2C11, University of South Carolina, Columbia, SC 29208, USA
| |
Collapse
|
35
|
He X, Yang X, Jabbari E. Combined effect of osteopontin and BMP-2 derived peptides grafted to an adhesive hydrogel on osteogenic and vasculogenic differentiation of marrow stromal cells. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:5387-5397. [PMID: 22372823 DOI: 10.1021/la205005h] [Citation(s) in RCA: 42] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
The objective of this work was to investigate the combined effect of grafting the peptide corresponding to amino acid residues 162-168 of osteopontin (OPD peptide) and the peptide corresponding to amino acid residues 73-92 of bone morphogenetic protein-2 (BMP peptide) to an RGD-conjugated inert hydrogel on osteogenic and vasculogenic differentiation of bone marrow stromal (BMS) cells. RGD-conjugated three-dimensional (3D) porous hydrogel scaffolds with well-defined cylindrical pore geometry were produced from sacrificial wax molds fabricated by fused deposition modeling rapid prototyping system. Propargyl acrylate and 4-pentenal were conjugated to the hydrogel for orthogonal grafting of BMP and OPD peptides by click reaction and oxime ligation, respectively. The OPD peptide was grafted by the reaction between aminooxy moiety of aminooxy-mPEG-OPD (mPEG = mini-poly(ethylene glycol)) and the aldehyde moiety in the hydrogel. The BMP peptide was grafted by the reaction between the azide moiety of Az-mPEG-BMP and the propargyl moiety in the hydrogel. The hydrogels seeded with BMS cells were characterized by biochemical, immunocytochemical, and mRNA analyses. Groups included RGD control hydrogel (RGD), RGD and BMP peptides without OPD (RGD+BMP), RGD and BMP peptides with mutant OPD (RGD+BMP+mOPD), and RGD and BMP peptides with OPD (RGD+BMP+OPD) grafted hydrogels. The extent of mineralization of RGD, RGD+BMP, RGD+BMP+mOPD, and RGD+BMP+OPD groups after 28 days was 650 ± 70, 990 ± 30, 850 ± 30, and 1150 ± 40 mg/(mg of DNA), respectively, indicating that the BMP and OPD peptides enhanced osteogenic differentiation of the BMS cells. The BMS cells seeded on RGD+BMP+OPD grafted hydrogels stained positive for vasculogenic markers α-SMA, PECAM-1, and VE-cadherin while the groups without OPD peptide (RGD+BMP and RGD+BMP+mOPD) stained only for α-SMA but not PECAM-1 or VE-cadherin. These results were consistent with the significantly higher PECAM-1 mRNA expression for RGD+BMP+OPD group after 21 and 28 days, compared to the groups without OPD. These findings suggest that the RGD+BMP+OPD peptides provide a favorable microenvironment for concurrent osteogenic and vasculogenic differentiation of progenitor marrow-derived cells.
Collapse
Affiliation(s)
- Xuezhong He
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, USA
| | | | | |
Collapse
|
36
|
Abstract
OBJECTIVE The objective of the study was to inform wound care practitioners of mesenchymal stem cell application for nonhealing wounds. Recent advances in delivery systems are also discussed in order to highlight potential improvements toward clinical application of stem cell therapy for chronic wounds. DATA SOURCES MEDLINE and PubMed Central were searched for scientific studies regarding the use of mesenchymal stem cells and delivery systems in wound healing. STUDY SELECTION Preclinical studies using stem cells as therapeutic modality for chronic wounds were selected for this review. DATA EXTRACTION Information on study design, sample size and characteristics, stem cell source, type of delivery systems, and rate and time of wound closure was abstracted. DATA SYNTHESIS Application of mesenchymal stem cells improved wound healing in experimental and clinical settings. Advances in stem cell therapy and delivery vehicles offer promising alternatives to current limited therapeutic modalities for chronic wounds. CONCLUSIONS Stem cell therapy has recently emerged as a promising therapeutic strategy for nonhealing wounds. Further research is needed to evaluate the relationship between the various delivery systems and stem cells in order to maximize their therapeutic effects. Development of novel delivery vehicles for stem cells can open new opportunities for more effective cell therapy of chronic wounds.
Collapse
|
37
|
Fang Y, Zheng Y, Hu F. Synthesis, characterization and degradation of well-defined crosslinkable aliphatic polyesters end-capped by biomesogenic units. Polym Degrad Stab 2012. [DOI: 10.1016/j.polymdegradstab.2011.10.015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/15/2022]
|
38
|
Koo GH, Jang J. Depth-gradient and photoinitiator-free photocrosslinking of poly(ethylene oxide). J Appl Polym Sci 2012. [DOI: 10.1002/app.36438] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
39
|
Moeinzadeh S, Jabbari E. Mesoscale Simulation of the Effect of a Lactide Segment on the Nanostructure of Star Poly(ethylene glycol-co-lactide)-Acrylate Macromonomers in Aqueous Solution. J Phys Chem B 2012; 116:1536-43. [DOI: 10.1021/jp211056p] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Affiliation(s)
- Seyedsina Moeinzadeh
- Biomimetic Materials and Tissue Engineering
Laboratories,
Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| | - Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering
Laboratories,
Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, United States
| |
Collapse
|
40
|
Abstract
This article summarizes the recent progress in the design and synthesis of hydrogels as tissue-engineering scaffolds. Hydrogels are attractive scaffolding materials owing to their highly swollen network structure, ability to encapsulate cells and bioactive molecules, and efficient mass transfer. Various polymers, including natural, synthetic and natural/synthetic hybrid polymers, have been used to make hydrogels via chemical or physical crosslinking. Recently, bioactive synthetic hydrogels have emerged as promising scaffolds because they can provide molecularly tailored biofunctions and adjustable mechanical properties, as well as an extracellular matrix-like microenvironment for cell growth and tissue formation. This article addresses various strategies that have been explored to design synthetic hydrogels with extracellular matrix-mimetic bioactive properties, such as cell adhesion, proteolytic degradation and growth factor-binding.
Collapse
Affiliation(s)
- Junmin Zhu
- Department of Biomedical Engineering, Case Western Reserve University, 10900 Euclid Avenue, Cleveland, OH 44106, USA.
| | | |
Collapse
|
41
|
Synthesis and Gelation Characteristics of Photo-Crosslinkable Star Poly(ethylene oxide-co-lactide-glycolide acrylate) Macromonomers. POLYMER 2011; 52:3887-3896. [PMID: 21927508 DOI: 10.1016/j.polymer.2011.07.007] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
Abstract
Viability of encapsulated cells in situ crosslinkable macromonomers depends strongly on the minimum concentration of polymerization initiators and monomers required for gelation. Novel 4-arm poly(ethylene oxide-co-lactide-glycolide acrylate) (SPELGA) macromonomers were synthesized and characterized with respect to gelation, sol fraction, degradation, and swelling in aqueous solution. SPELGA macromonomers were crosslinked in the absence of N-vinyl-2-pyrrolidone (NVP) monomer to produce a hydrogel network with a shear modulus of 27±4 kPa. The shear modulus of the gels increased by 170-fold as the macromonomer concentration was increased from 10 to 25 wt%. Sol fraction ranged between 8-18%. Addition of only 0.4 mol% NVP to the polymerization mixture increased modulus by 2.2-fold from 27±4 (no NVP) to 60±10 kPa. The higher modulus was attributed to the dilution effect of polymer chains in the sol, by delaying the onset of diffusion-controlled reaction, and cross-propagation of the growing chains with network-bound SPELGA acrylates. Degradation of SPELGA gels depended on water content and density of hydrolytically degradable ester groups.
Collapse
|
42
|
Controlled biodegradation of self-assembling β-hairpin peptide hydrogels by proteolysis with matrix metalloproteinase-13. Biomaterials 2011; 32:6471-7. [PMID: 21683437 DOI: 10.1016/j.biomaterials.2011.05.052] [Citation(s) in RCA: 80] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2011] [Accepted: 05/15/2011] [Indexed: 01/03/2023]
Abstract
Controlled biodegradation specific to matrix metalloproteinase-13 was incorporated into the design of self-assembling β-hairpin peptide hydrogels. Degrading Peptides (DP peptides) are a series of five peptides that have varying proteolytic susceptibilities toward MMP-13. These peptides undergo environmentally triggered folding and self-assembly under physiologically relevant conditions (150 mm NaCl, pH 7.6) to form self-supporting hydrogels. In the presence of enzyme, gels prepared from distinct peptides are degraded at rates that differ according to the primary sequence of the single peptide comprising the gel. Material degradation was monitored by oscillatory shear rheology over the course of 14 days, where overall degradation of the gels vary from 5% to 70%. Degradation products were analyzed by HPLC and identified by electrospray-ionization mass spectrometry. This data shows that proteolysis of the parent peptides constituting each gel occurs at the intended sequence location. DP hydrogels show specificity to MMP-13 and are only minimally cleaved by matrix metalloproteinase-3 (MMP-3), another common enzyme present during tissue injury. In vitro migration assays performed with SW1353 cells show that migration rates through each gel differs according to peptide sequence, which is consistent with the proteolysis studies using exogenous MMP-13.
Collapse
|
43
|
Synthesis and characterization of biodegradable-cum-crosslinkable well-defined polyesters via chain-growth polycondensation in solid–liquid phase. Polym Degrad Stab 2011. [DOI: 10.1016/j.polymdegradstab.2010.11.003] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
44
|
Jabbari E. Effect of sustained release of bone morphogenetic protein on osteogenic expression of mesenchymal stem cells. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2011; 2010:3733-5. [PMID: 21096864 DOI: 10.1109/iembs.2010.5627505] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
The objective of this work was to investigate the effect of sustained release of rhBMP-2, grafted to biodegradable nanoparticles (NPs) based on osteogenic differentiation of bone mesenchymal stem (BMS) cells. The release kinetics of rhBM-2 was linear with incubation time in the first two weeks. rhBMP-2 grafted NPs were as effective in inducing mineralization as the rhBMP-2 directly added to the culture media. rhBMP-2 grafted NPs had much higher expression of osteogenic markers osteopontin (OP) and osteocalcin (OC), compared to the protein directly added to culture media.
Collapse
|
45
|
Jabbari E. Bioconjugation of hydrogels for tissue engineering. Curr Opin Biotechnol 2011; 22:655-60. [PMID: 21306888 DOI: 10.1016/j.copbio.2011.01.003] [Citation(s) in RCA: 62] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/09/2011] [Accepted: 01/18/2011] [Indexed: 02/02/2023]
Abstract
Success of tissue engineered constructs in regenerative medicine is limited by the lack of cellmatrix interactions to guide devleopment of the seeded cells into the desired tissue. This review highlights the most exciting developments in bioconjugation of synthetic hydrogels targeted to tissue engineering. Application of conjugation techniques has resulted in the synthesis of novel biomimetic cell-responsive hydrogels to control the cascade of cell migration, adhesion, survival, differentiation, and maturation to the desired lineage concurrent with matrix remodeling. The future outlook includes developing conjugated patterned hydrogel matrices, developing novel hydrogel matrices to support self-renewal and pluripotency of embryonic and adult stem cells, and merging 3D printing with bioconjugation to fabricate hydrogels with anatomical arrangement of cells and biomolecules.
Collapse
Affiliation(s)
- Esmaiel Jabbari
- Biomimetic Materials and Tissue Engineering Laboratory, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA.
| |
Collapse
|
46
|
Nguyen LH, Kudva AK, Guckert NL, Linse KD, Roy K. Unique biomaterial compositions direct bone marrow stem cells into specific chondrocytic phenotypes corresponding to the various zones of articular cartilage. Biomaterials 2011; 32:1327-38. [DOI: 10.1016/j.biomaterials.2010.10.009] [Citation(s) in RCA: 98] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2010] [Accepted: 10/06/2010] [Indexed: 10/18/2022]
|
47
|
Mercado AE, Jabbari E. Effect of encapsulation or grafting on release kinetics of recombinant human bone morphogenetic protein-2 from self-assembled poly(lactide-co-glycolide ethylene oxide fumarate) nanoparticles. Microsc Res Tech 2010; 73:824-33. [PMID: 20232367 DOI: 10.1002/jemt.20846] [Citation(s) in RCA: 11] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
The objective of this work was to compare the release characteristics of Recombinant human bone morphogenetic protein-2 (rhBMP-2) encapsulated in thermally self-assembled poly(lactide ethylene oxide fumarate) (PLEOF) nanoparticles (NPs) with rhBMP-2 grafted to succinimide-terminated poly(lactide fumarate) (PLAF-NHS) or poly(lactide-co-glycolide fumarate) (PLGF-NHS) NPs. The amphiphilic PLEOF NPs had average size of 110 +/- 50 nm. The hydrophobic PLAF-NHS and PLGF-NHS NPs had average size of 242 +/- 67 and 195 +/- 42 nm, respectively. PLEOF NPs had rhBMP-2 encapsulation efficiency ranging from 65 to 93%. Grafting efficiency of rhBMP-2 to PLAF-NHS and PLGF-NHS NPs was 97% +/- 1% and 98% +/- 1%, respectively. PLEOF NPs displayed a relatively high-release rate of rhBMP-2 in the first week, which rapidly dropped to zero after 10 days. PLEOF NPs grafted with 10 and 20 microg/mL rhBMP-2 released 67 and 80% of the protein in the active conformation after degradation. PLGF-NHS NPs displayed sustained release of rhBMP-2 in the first 2 weeks but dropped to almost zero rate (< 3 ng/day) after 20 days. PLAF-NHS NPs showed the longest period of sustained release of active rhBMP-2 at two rates: a high rate of 25-35 ng/mL in the first 2 weeks followed by a low rate of 5-10 ng/mL from 2 to 6 weeks. Nearly, 25 and 50% of the rhBMP-2 released from PLGF-NHS and PLAF-NHS NPs, respectively, were enzymatically active after degradation of the NPs. PLEOF NPs provided a fast release of rhBMP-2 for 1 week, whereas PLAF-NHS NPs provided a slow release for up to 6 weeks.
Collapse
Affiliation(s)
- Angel E Mercado
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, South Carolina 29208, USA
| | | |
Collapse
|
48
|
Degradable Hydrogels for Tissue Engineering – Part I: Synthesis by RAFT Polymerization and Characterization of PHEMA Containing Enzymatically Degradable Crosslinks. ACTA ACUST UNITED AC 2010. [DOI: 10.4028/www.scientific.net/jbbte.6.67] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A nonapeptide, which is sensitive to enzymatic digestion by collagenase, was modified by the covalent attachment of an acrylamido group at the terminal positions. The functionalized peptide was used as a crosslinking agent during polymerization of 2-hydroxyethyl methacrylate (HEMA). Reversible addition-fragmentation chain transfer (RAFT) method was used to obtain a polymer (PHEMA) with an average theoretical molecular weight of 4000 Da, containing enzymatically labile peptide crosslinks. The functionalized peptide was analyzed in detail by 1H and 13C nuclear magnetic resonance (NMR) spectrometry. The polymerization reaction was monitored by near infrared spectrometry, while the resulting polymer was analyzed by size exclusion chromatography and solid NMR spectrometry. The peptide-crosslinked PHEMA was subjected to an in-vitro degradation assay in the presence of collagenase. At the highest concentration of enzyme used in the study, a weight loss of 35% was recorded after 60 days of incubation in the collagenolytic medium. This suggests that crosslinking with enzymatically degradable peptides is a valid method for inducing biodegradability in polymers that otherwise are not degradable.
Collapse
|
49
|
Ma J, He X, Jabbari E. Osteogenic differentiation of marrow stromal cells on random and aligned electrospun poly(L-lactide) nanofibers. Ann Biomed Eng 2010; 39:14-25. [PMID: 20577811 DOI: 10.1007/s10439-010-0106-3] [Citation(s) in RCA: 77] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/27/2010] [Accepted: 06/11/2010] [Indexed: 11/25/2022]
Abstract
The fibrillar structure and sub-micron diameter of electrospun nanofibers can be used to reproduce the morphology and structure of the natural extracellular matrix (ECM). The objective of this work was to investigate the effect of fiber alignment on osteogenic differentiation of bone marrow stromal (BMS) cells. Random and aligned poly(L-lactide) (PLLA) nanofibers were produced by collecting the spun fibers on a stationary plate and a rotating wheel, respectively, as the ground electrode. Morphology and alignment of the BMS cells seeded on the fibers were characterized by SEM. The effect of fiber orientation on osteogenic differentiation of BMS cells was determined by measuring alkaline phosphatase (ALPase) activity, calcium content, and mRNA expression levels of osteogenic markers. There was a strong correlation between the fiber and cell distributions for the random (p=0.16) and aligned (p=0.81) fibers. Percent deviation from ideal randomness (PDIR) values indicated that cells seeded on the random fibers (PDIR=6.5%) were likely to be distributed randomly in all directions while cells seeded on the aligned fibers (PDIR=86%) were highly likely to be aligned with the direction of fibers. BMS cell seeded on random and aligned fibers had similar cell count and ALPase activity with incubation time, but the calcium content on aligned fibers was significantly higher after 21 days compared to that of random fibers (p=0.003). Osteopontin (OP) and osteocalcin (OC) expression levels of BMS cells on fibers increased with incubation time. However, there was no difference between the expression levels of OP and OC on aligned vs. random fibers. The results indicate that BMS cells aligned in the direction of PLLA fibers to form long cell extensions, and fiber orientation affected the extent of mineralization, but it had no effect on cell proliferation or mRNA expression of osteogenic markers.
Collapse
Affiliation(s)
- Junyu Ma
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, Swearingen Engineering Center, Rm 2C11, University of South Carolina, Columbia, SC 29208, USA
| | | | | |
Collapse
|
50
|
Xu W, Ma J, Jabbari E. Material properties and osteogenic differentiation of marrow stromal cells on fiber-reinforced laminated hydrogel nanocomposites. Acta Biomater 2010; 6:1992-2002. [PMID: 19995620 DOI: 10.1016/j.actbio.2009.12.003] [Citation(s) in RCA: 56] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/16/2009] [Revised: 11/24/2009] [Accepted: 12/01/2009] [Indexed: 12/01/2022]
Abstract
The fibrils in the bone matrix are glued together by extracellular matrix proteins to form laminated structures (osteons) to provide elasticity and a supportive substrate for osteogenesis. The objective of this work was to investigate material properties and osteogenic differentiation of bone marrow stromal (BMS) cells seeded on osteon-mimetic fiber-reinforced hydrogel/apatite composites. Layers of electrospun poly(l-lactide) fiber mesh coated with a poly(lactide-co-ethylene oxide fumarate) (PLEOF) hydrogel precursor solution were stacked and pressed together, and crosslinked to produce a laminated fiber-reinforced composite. Hydroxyapatite (HA) nanocrystals were added to the precursor solution to produce an osteoconductive matrix for BMS cells. Acrylamide-terminated Arg-Gly-Asp (RGD) peptide (Ac-GRGD) was conjugated to the PLEOF/HA hydrogel phase to promote focal point adhesion of BMS cells. Laminates were characterized with respect to the Young's modulus, degradation kinetics and osteogenic differentiation of BMS cells. The moduli of the laminates under dry and wet conditions were significantly higher than those of the fiber mesh and PLEOF/HA hydrogel, and within the range of values reported for wet human cancellous bone. At days 14 and 21, alkaline phosphatase (ALPase) activity of the laminates was significantly higher than those of the fiber mesh and hydrogel. Lamination significantly increased the extent of mineralization of BMS cells and laminates with HA and conjugated with RGD (Lam-RGD-HA) had 2.7-, 3.5- and 2.8-fold higher calcium content (compared to laminates without HA or RGD) after 7, 14 and 21days, respectively. The Lam-RGD-HA group had significantly higher expression of osteopontin and osteocalcin compared to the hydrogel or laminates without HA or RGD, consistent with the higher ALPase activity and calcium content of Lam-RGD-HA. Laminated osteon-mimetic structures have the potential to provide mechanical strength to the regenerating region as well as supporting the differentiation of progenitor cells to the osteogenic lineage.
Collapse
Affiliation(s)
- Weijie Xu
- Biomimetic Materials and Tissue Engineering Laboratories, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208, USA
| | | | | |
Collapse
|