A Class of (Pd–Ni–P) Electrocatalysts for the Ethanol Oxidation Reaction in Alkaline Media

Synthesis of Monodispersed Pd Nanoparticles and Ultrathin Twisty Pd Nanowire Networks for Electrooxidation of Ethanol

In recent years, preparing precious metal catalysts with a controllable morphology has become a hot research topic for researchers. In this study, monodispersed palladium (Pd) nanoparticles (NP) and ultrathin Pd twisty nanowire networks (TNN) were synthesized in a solvothermal system using N,N-dimethylformamide (DMF) and oleylamine (OAm) as solvents, Transmission electron microscopy (TEM) images reveal the successful synthesis of nanoparticles and ultrathin TNN microstructures. Electrochemical data show that the current densities of Pd-NP and Pd-TNN for the ethanol oxidation reaction (EOR) reach 1878 mA mg-1 and 1765 mA mg-1, respectively. Compared to commercial Pd/C, Pd-TNN and Pd-NP exhibit better catalytic stability, lower electron transfer barriers, and more resistance to catalyst poisoning. Temperature, pH value, and ethanol concentration are all favorable for the EOR. According to the experimental data, the mechanism of enhanced electrocatalytic activity of Pd-NP and Pd-TNN catalysts for ethanol oxidation is discussed. This paper presents a method for preparing catalysts with stabilized structures to develop Pd-based catalysts for electrocatalytic oxidation reactions.

In-situ synthesis of carbon-supported ultrafine trimetallic PdSnAg nanoparticles for highly efficient alcohols electrocatalysis

Designing functional and durable electrocatalysts for the oxidation of alcohols plays a significant role for the development of direct alcohol fuel cells (DAFCs). Herein, carbon-supported ultrafine PdSnAg nanoparticles with an average size of 3.27 nm (denoted as PdSnAg/C NPs) have been synthesized for alcohols electrocatalysis. The smaller particle size means a higher proportion of surface exposed atoms for catalyzing the reaction followed by high catalytic performance. The multimetallic nanoalloys have potential electronic structure adjustment and synergistic effect between different components. The incorporation of oxophilic metals Sn and Ag facilitates the removal of intermediates produced during the oxidation of alcohols. The PdSnAg/C NPs exhibit a remarkable electrocatalytic performance for ethylene glycol oxidation reaction (EGOR) with the mass activity of 12.3 A mgPd-1, which is 15.6, 2.50 and 2.60 times higher than those of commercial Pd/C (0.790 A mgPd-1), PdSn/C NPs (4.85 A mgPd-1) and PdAg/C NPs (4.69 A mgPd-1), respectively. Meanwhile, PdSnAg/C NPs show superior mass activities of 10.6 A mgPd-1 and 6.65 A mgPd-1 for ethanol oxidation reaction (EOR) and glycerol oxidation reaction (GOR), which are 14.3 and 8.30 times superior than the commercial Pd/C, respectively. The exceptional mass activity promises the PdSnAg/C NPs to be the potential Pd-based catalysts for alcohols electrocatalysis.

Synthesis of Free-Standing Pd-Ni-P Metallic Glass Nanoparticles with Durable Medium-Range Ordered Structure for Enhanced Electrocatalytic Properties

Topologically disordered metallic glass nanoparticles (MGNPs) with highly active and tailorable surface chemistries have immense potential for functional uses. The synthesis of free-standing MGNPs is crucial and intensively pursued because their activity strongly depends on their exposed surfaces. Herein, a novel laser-evaporated inert-gas condensation method is designed and successfully developed for synthesizing free-standing MGNPs without substrates or capping agents, which is implemented via pulse laser-induced atomic vapor deposition under an inert helium atmosphere. In this way, the metallic atoms vaporized from the targets collide with helium atoms and then condense into short-range-order (SRO) clusters, which mutually assemble to form the MGNPs. Using this method, free-standing Pd40 Ni40 P20 MGNPs with a spherical morphology are synthesized, which demonstrates satisfactory electrocatalytic activity and durability in oxygen reduction reactions. Moreover, local structure investigations using synchrotron pair distribution function techniques reveal the transformation of SRO cluster connection motifs of the MGNPs from face-sharing to edge-sharing modes during cyclic voltammetry cycles, which enhances the electrochemical stability by blocking crystallization. This approach provides a general strategy for preparing free-standing MGNPs with high surface activities, which may have widespread functional applications.

Unveiling the effect of shapes and electrolytes on the electrocatalytic ethanol oxidation activity of self-standing Pd nanostructures

Morphologically controlled Pd-based nanocrystals are the most efficient strategies for improving the electrocatalytic ethanol oxidation reaction (EOR) performance; however, their morphological-EOR activity relationship and effect of electrolytes at a wide pH range are still ambiguous. Here, we have synthesized porous self-standing Pd clustered nanospheres (Pd-CNSs) and Pd nanocubes (Pd-NCBs) for the EOR in acidic (H₂SO₄), alkaline (KOH), and neutral (NaHCO₃) electrolytes compared to commercial spherical-like Pd/C catalysts. The fabrication process comprises the ice-cooling reduction of Pd precursor by sodium borohydride (NaBH₄) and l-ascorbic acid to form Pd-CNSs and Pd-NCBs, respectively. The EOR activity of Pd-CNSs significantly outperformed those of Pd-NCBs, and Pd/C in all electrolytes, but the EOR activity was better in KOH than in H₂SO₄ and NaHCO₃. This is due to the 3D porous clustered nanospherical morphology that makes Pd active centers more accessible and maximizes their utilization during EOR. The EOR specific/mass activities of Pd-CNSs reached (8.51 mA/cm²/2.39 A/mg_Pd) in KOH, (2.98 mA/cm²/0.88 A/mg_Pd) in H₂SO₄, and (0.061 mA/cm²/0.0083 A/mg_Pd) in NaHCO₃, in addition to stability after 1000 cycles. This study affirms that porous 3D spherical Pd nanostructures are preferred for the EOR than those of 0D spherical-like and multi-dimensional cube-like nanostructures.

Ethanol Oxidation via 12-Electron Pathway on Spiky Au@AuPd Nanoparticles Assisted by Near-Infrared Light

In this work, ethanol oxidation reaction (EOR) via 12-electron (C1-12e) pathway on spiky Au@AuPd nanoparticles (NPs) with ultrathin AuPd alloy shells is achieved in alkaline media with the assistance of the near-infrared (NIR) light. It is found that OH radicals can be produced from the OH_ads species adsorbed on the surfaces of Pd atoms led by surface plasmon resonance (SPR) effect of spiky Au@AuPd NPs under the irradiation of NIR light. Moreover, OH radicals play the key role for the achievement of EOR proceeded by the desirable C1-12e pathway because OH radicals can directly break the C-C bonds of ethanol. Accordingly, the electrocatalytic performance of spiky Au@AuPd NPs toward EOR under NIR light is greatly improved. For instance, their mass activity can be up to 33.2 A mg_pd ^-1 in the 0.5 m KOH solution containing 0.5 m ethanol, which is about 158 times higher than that of commercial Pd/C catalysts (0.21 A mg_pd ^-1 ) and is better than those of the state-of-the-art Pd-based catalysts reported in literature thus far, to the best of our knowledge. Moreover, their highest mass activity can be further improved to 118.3 A mg_pd ^-1 in the 1.5 m KOH solution containing 1.25 m ethanol.

Boosting the Electrocatalytic Formic Acid Oxidation Activity via P-PdAuAg Quaternary Alloying

Direct formic acid fuel cells (DFAFCs) are considered promising sustainable power sources due to their high energy density, nonflammability, and low fuel crossover. However, serious CO poisoning and activity attenuation of the anodic formic acid oxidation reaction (FAOR) greatly restrict the output and durability of DFAFCs. Inspired by the specific relationship between the composition, type, and property of alloys, in this work, we synthesize a series of hybrid substitutional/interstitial quaternary alloys P-PdAuAg by means of a novel polyphosphide route to address these issues. Due to the simultaneous interstitial P-doping and metal (Au, Ag, Pd) co-reduction, the P-PdAuAg quaternary alloy obtained is only 3 nm in diameter with abundant defects. It not only achieves a new high mass activity of 8.08 A mg_Pd^-1 (6.78 A mg_catalyst^-1) but also maintains high stability in the high potential range and harsh reaction conditions. Both the activity and anti-poisoning ability are far exceeding those of the currently reported FAOR catalysts. Detailed density functional theory (DFT) calculations reveal that the superb electrochemical performances originate from the shift of the d-band center of Pd as a result of the synergistic electronic/ligand effects between Pd, Au, Ag, and P. The introduction of interstitial P inhibits the occurrence of an indirect reaction pathway on Pd, while Au and Ag suppress the adsorption of CO and optimize the sequential dehydrogenation steps, leading to boosted reaction kinetics and CO tolerance. This work pioneered a facile way for the synthesis of Pd-based substitutional/interstitial hybrid alloys, providing a promising means of further improving the performance of alloying catalysts.

One-Pot Au@Pd Dendritic Nanoparticles as Electrocatalysts with Ethanol Oxidation Reaction

The one-pot synthesis strategy of Au@Pd dendrites nanoparticles (Au@Pd DNPs) was simply synthesized in a high-temperature aqueous solution condition where cetyltrimethylammonium chloride (CTAC) acted as a reducing and capping agent at a high temperature. The Au@Pd DNPs with highly monodisperse were shown in high yields by the Au:Pd rate. The nanostructure and optical and crystalline properties of the Au@Pd DNPs were characterized by UV–vis spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction. The Au@Pd DNPs showed an efficient electrochemical catalytic performance rate toward the ethanol oxidation reaction (EOR) due to their nanostructures and Au:Pd rate.

Adsorption Energy in Oxygen Electrocatalysis

Adsorption energy (AE) of reactive intermediate is currently the most important descriptor for electrochemical reactions (e.g., water electrolysis, hydrogen fuel cell, electrochemical nitrogen fixation, electrochemical carbon dioxide reduction, etc.), which can bridge the gap between catalyst's structure and activity. Tracing the history and evolution of AE can help to understand electrocatalysis and design optimal electrocatalysts. Focusing on oxygen electrocatalysis, this review aims to provide a comprehensive introduction on how AE is selected as the activity descriptor, the intrinsic and empirical relationships related to AE, how AE links the structure and electrocatalytic performance, the approaches to obtain AE, the strategies to improve catalytic activity by modulating AE, the extrinsic influences on AE from the environment, and the methods in circumventing linear scaling relations of AE. An outlook is provided at the end with emphasis on possible future investigation related to the obstacles existing between adsorption energy and electrocatalytic performance.

Low Pt-Doped Crystalline/Amorphous Heterophase Pd12P3.2 Nanowires as Efficient Catalysts for Methanol Oxidation

Pd-based catalysts are attractive anodic electrocatalysts for direct methanol fuel cells owing to their low cost and natural abundance. However, they suffer from sluggish reaction kinetic and insufficient electroactivity in methanol oxidation reaction (MOR). In this work, we developed a facile one-pot approach to fabricate low Pt-doped Pd₁₂P_3.2 nanowires with crystalline/amorphous heterophase (termed Pt-Pd₁₂P_3.2 NWs) for MOR. The unique crystalline/amorphous heterophase structures promote the catalytic activity by the plentiful active sites at the phase boundaries and/or interfaces and the synergistic effect between different phases. Moreover, the incorporation of trace Pt into Pd lattices modifies the electronic structure and improves the electron transfer ability. Therefore, the obtained Pt-Pd₁₂P_3.2 NWs display significantly enhanced electrocatalytic performance toward MOR with the mass activity of 2.35 A mg_Pd+Pt^-1, which is 9.0, 2.9, and 2.0 times higher than those of the commercial Pd/C (0.26 A mg_Pd^-1), Pd₁₂P_3.2 NWs (0.82 A mg_Pd^-1), and commercial Pt/C (1.19 A mg_Pt^-1). The high mass activity enables the Pt-Pd₁₂P_3.2 NWs to be the promising Pd-based catalysts for MOR.

Branch-Regulated Palladium-Antimony Nanoparticles Boost Ethanol Electro-oxidation to Acetate

Tuning the composition and morphology of bimetallic nanoparticles (NPs) offers an effective strategy to improve their electrocatalytic performance. In this work, we present a facile wet-chemistry procedure to engineer PdSb NPs with controlled morphology. Spherical or branched NPs are produced by tuning the heterogeneous nucleation of Sb on Pd seeds. Compared with pure Pd NPs, the incorporation of Sb not only decreases the amount of Pd used but also results in a significant increase of activity and stability for the electrocatalytic ethanol oxidation reaction (EOR). Best performances are obtained with highly branched PdSb NPs, which deliver a specific activity of 109 mA cm^-2 and a mass activity of up to 2.42 A mg_Pd^-1, well above that of a commercial Pd/C catalyst and branched Pd NPs. Moreover, PdSb displays significant stability enhancement of over 10 h for the EOR measurements. Density functional theory calculations reveal that the improved performance of PdSb NPs is related to the role played by Sb in reducing the energy barrier of the EOR rate-limiting step. Interestingly, as a side and value-added product of the EOR, acetate is obtained with 100% selectivity on PdSb catalysts.

Assembly of Alloyed PdCu Nanosheets and Their Electrocatalytic Oxidation of Ethanol

Two-dimensional (2D) nanostructured catalysts have attracted great attention in many important fields, including energy applications and chemical industry. In this study, PdCu nanosheet assemblies (NSAs) have been synthesized and investigated as electrocatalysts for direct ethanol fuel cells in an alkaline medium. A great number of active sites on the nanosheets of PdCu NSAs for ethanol electro-oxidation are exposed, where the electron structures are optimized combined with the second element copper. Electrochemical measurements show that PdCu NSA1 exhibits excellent catalytic activity (2536 mA mg^-1) and cyclic stability compared to PdCu NSA2 (1700 mA mg^-1) and PdCu NSA3 (1436 mA mg^-1), much higher than commercial Pd/C. Kinetics studies on the electrolysis of ethanol suggest that PdCu NSAs should be more favorable at higher catalytic temperatures, higher concentrations of ethanol, and low pH value environments. The unique composition and structures PdCu NSA1 would result in the lowest energy barrier in the rate-controlling step of the ethanol oxidation reaction (EOR), confirmed by density functional theory (DFT). The formation mechanism of PdCu NSAs and their excellent electrocatalytic activity toward EOR have been discussed and analyzed.

Electro-exfoliated PdTe2 nanosheets for enhanced methanol electrooxidation performance in alkaline media

Hydrogen-free cathodic exfoliation was utilized to obtain PdTe₂ nanosheets (PTNS) with size 300 nm × 100 nm. Abundant highly exposed active sites and a strong electronic effect between Pd and Te endow PTNS with simultaneous superior methanol oxidation performance in alkaline media, which delivers a low onset potential, high mass and specific activity, and efficient CO elimination ability.

B, N Co-Doping Sequence: An Efficient Electronic Modulation of the Pd/MXene Interface with Enhanced Electrocatalytic Properties for Ethanol Electrooxidation

Improving the electrocatalytic properties by regulating the surface electronic structure of supported metals has always been a hot issue in electrocatalysis. Herein, two novel catalysts Pd/B-N-Ti₃C₂ and Pd/N-B-Ti₃C₂ are used as the models to explore the effect of the B and N co-doping sequence on the surface electronic structure of metals, together with the electrocatalytic properties of ethanol oxidation reaction. The two catalysts exhibit obviously stratified morphology, and the Pd nanoparticles having the same amount are both uniformly distributed on the surface. However, the electron binding energy of Ti and Pd elements of Pd/B-N-Ti₃C₂ is smaller than that of Pd/N-B-Ti₃C₂. By exploring the electrocatalytic properties for EOR, it can be seen that all the electrochemical surface area, maximum peak current density, and antitoxicity of the Pd/B-N-Ti₃C₂ catalyst are much better than its counterpart. Such different properties of the catalysts can be attributed to the various doping species of B and N introduced by the doping sequence, which significantly affect the surface electronic structure and size distribution of supported metal Pd. Density functional theory calculations demonstrate that different B-doped species can offer sites for the H atom from CH₃CH₂OH of dehydrogenation in Pd/B-N-Ti₃C₂, thereby facilitating the progress of the EOR to a favorable pathway. This work provides a new insight into synthesizing the high-performance anode materials for ethanol fuel cells by regulating the supported metal catalyst with multielement doping.

Boosting the anti-poisoning ability of palladium towards electrocatalytic formic acid oxidation via polyphosphide chemistry

In this work, we reported a novel polyphosphide strategy for the synthesis of phosphorus doped Pd (P-Pd) using red phosphorus as the starting material at quasi-ambient conditions. Polyphophide anions, as the key reaction intermediates, served as the reducing agent and phosphorus source to modulate the surface electronic structure of Pd. The P-Pd obtained exhibited topmost CO tolerance and electrocatalytic activity to formic acid oxidation among the state-of-arts reports. The mass activity and turnover frequency of P-Pd reached 4413 mA mg^-1_Pd and 16.04 s^-1 at 0.8 V, which were 23.7 and 6.4 times that of commercial Pd/C respectively. After 1000 repeated cycles, 82% initial activity was reserved. Combined with the electrochemical analysis and the density functional theory calculation, the boosted electrochemical performances can be attributed to the size and electronic effects induced by the P doping, which increase the surface actives sites, inhibit the adsorption of CO and change the reaction pathway to favorable CO₂ route. A full cell was also assembled to demonstrate the practical potential of the P-Pd, which showed a maximum power density of 21.56 mW cm^-2. This polyphophide-based reaction route provides a new strategy for the preparation of efficient and durable phosphorus doped alloys for electrocatalysis.

Amorphous Palladium-Based Alloy Nanoparticles as Highly Active Electrocatalysts for Ethanol Oxidation

Amorphous Pd-P metal-metalloid alloy nanoparticles showed higher electrochemical ethanol oxidation reaction performance than the crystalline Pd nanopartilces. The high performance was attributed to the rich defective coordination unsaturated sites and...

Alloyed Palladium-Lead Nanosheet Assemblies for Electrocatalytic Ethanol Oxidation

Synthesizing alloyed bimetallic electrocatalysts with a three-dimensional (3D) structure assembly have arouse great interests in electrocatalysis. We synthesized a class of alloyed Pd₃Pb/Pd nanosheet assemblies (NSAs) composed of a two-dimensional (2D) sheet structure with adjustable compositions via an oil bath approach at a low temperature. Both the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal the successful formation of the nanosheet structure, where the morphology of Pd₃Pb/Pd NSAs can be regulated by adjusting the atomic mole ratio of Pb and Pb metal precursors. The power X-ray diffraction (XRD) pattern shows that Pd₃Pb/Pd NSA catalysts are homogeneously alloyed. Electrochemical analysis and the density functional theory (DFT) method demonstrate that the electrocatalytic activity of the alloyed Pd₃Pb/Pd NSAs can be improved by the doping of the Pb element. As a result of the addition of element Pb and change of the electron structure, the electrocatalytic activity toward ethanol oxidation of alloyed Pd₃Pb/Pd-15 NSA can reach up to 2886 mA mg^-1, which is approximately 2.8 times that of the pure Pd NSA counterpart (1020 mA mg^-1). The Pd₃Pb/Pd NSAs are favorable in a high catalytic temperature, high KOH concentration, and high ethanol concentration.

Enhanced Electrocatalytic Activity of Alloyed Palladium-Lead Nanoparticles toward Electrooxidation of Ethanol

Although many researchers have made great efforts to pursue promising high-efficiency electrocatalysts, a formidable challenge remains for designing excellent palladium-based electrocatalysts for commercializing direct liquid fuel cells. This study reports the synthesis of bimetallic PdPb nanoparticles (NPs) via a mixed solution containing cetyl trimethyl ammonium bromide as the capping agent. Alloyed PdPb NPs are formed, where the size of the NPs increases as Pb atoms are introduced gradually. However, Pd₃Pb NPs are obtained with the same molar ratio of Pd and Pb in the raw systems. Among all of the as-made NPs, Pd₉Pb₁ NPs exhibit superior catalytic activity (2620 mA mg^-1) toward ethanol electrooxidation, 4.3 times higher than commercial Pd/C catalysts (613 mA mg^-1). The overall rate of the EOR for PdPb NPs is determined, demonstrating that the electrocatalytic activity of the PdPb NPs increases at high catalytic temperatures, in high pH environments, and/or at high ethanol concentrations.

Nonmetal-doping of noble metal-based catalysts for electrocatalysis

In response to the shortage of fossil fuels, efficient electrochemical energy conversion devices are attracting increasing attention, while the limited electrochemical performance and high cost of noble metal-based electrode materials remain a daunting challenge. The electrocatalytic performance of electrode materials is closely bound with their intrinsic electronic/ionic states and crystal structures. Apart from the nanoscale design and conductive composite strategies, heteroatom doping, particularly for nonmetal doping (e.g., hydrogen, boron, sulfur, selenium, phosphorus, and tellurium), is also another effective strategy to greatly promote the intrinsic activity of the electrode materials by tuning their atomic structures. From the perspective of electrocatalytic reactions, the effective atomic structure regulation could induce additional active sites, create rich defects, and optimize the adsorption capability, thereby contributing to the promotion of the electrocatalytic performance of noble metal-based electrocatalysts. Encouraged by the great progress achieved in this field, we have reviewed recent advancements in nonmetal doping for electrocatalytic energy conversion. Specifically, the doping effect on the atomic structure and intrinsic electronic/ionic state is also systematically illustrated and the relationship with the electrocatalytic performance is also investigated. It is believed that this review will provide guidance for the development of more efficient electrocatalysts.

A comprehensive and critical review of the recent progress in electrocatalysts for the ethanol oxidation reaction

The human craving for energy is continually mounting and becoming progressively difficult to gratify. At present, the world's massive energy demands are chiefly encountered by nonrenewable and benign fossil fuels. However, the development of dynamic energy cradles for a gradually thriving world to lessen fossil fuel reserve depletion and environmental concerns is currently a persistent issue for society. The discovery of copious nonconventional resources to fill the gap between energy requirements and supply is the extreme obligation of the modern era. A new emergent, clean, and robust alternative to fossil fuels is the fuel cell. Among the different types of fuel cells, the direct ethanol fuel cell (DEFCs) is an outstanding option for light-duty vehicles and portable devices. A critical tactic for obtaining sustainable energy sources is the production of highly proficient, economical and green catalysts for energy storage and conversion devices. To date, a broad range of research is available for using Pt and modified Pt-based electrocatalysts to augment the C₂H₅OH oxidation process. Pt-based nanocubes, nanorods, nanoflowers, and the hybrids of Pt with metal oxides such as Fe₂O₃, TiO₂, SnO₂, MnO, Cu₂O, and ZnO, and with conducting polymers are extensively utilized in both acidic and basic media. Moreover, Pd-based materials, transition metal-based materials, as well as transition metal-based materials are also points of interest for researchers nowadays. This review article delivers a broad vision of the current progress of the EOR process concerning noble metals and transition metals-based materials.

Structure-Reactivity Effects of Biomass-based Hydroxyacids for Sustainable Electrochemical Hydrogen Production

Biomass electro-oxidation is a promising approach for the sustainable generation of H₂ by electrolysis with simultaneous synthesis of value-added chemicals. In this work, the electro-oxidation of two structurally different organic hydroxyacids, lactic acid and gluconic acid, was studied comparatively to understand how the chemical structure of the hydroxyacid affects the electrochemical reactivity under various conditions. It was concluded that hydroxyacids such as gluconic acid, with a considerable density of C-OH groups, are highly reactive and promising for the sustainable generation of H₂ by electrolysis at low potentials and high conversion rates (less than -0.15 V vs. Hg/HgO at 400 mA cm^-2 ) but with low selectivity to specific final products. In contrast, the lower reactivity of lactic acid did not enable H₂ generation at very high conversion rates (<100 mA cm^-2 ), but the reaction was significantly more selective (64 % to pyruvic acid). This work shows the potential of biomass-based organic hydroxyacids for sustainable generation of H₂ and highlights the importance of the chemical structure on the reactivity and selectivity of the electro-oxidation reactions.

Surfactant-Assisted Synthesis of Palladium Nanosheets and Nanochains for the Electrooxidation of Ethanol

The synthesis of metal nanometer electrocatalysts with a two-dimensional (2D) structure or rich active sites has become a research hotspot in electrocatalysis. In this work, surfactant hexadecyltrimethylammonium bromide (CTAB) was used to assist the synthesis and assembly of Pd ultrathin nanosheet with the help of Mo(CO)₆ in the start system. Pd nanochain composed of nanoparticles is obtained under the same condition, replacing CTAB with carrageenan only. Electrochemical measurements showed that the catalytic peak current density for the electrooxidation of ethanol can reach 2145 mA mg^-1 for the Pd nanosheet assembly (NSA) and 1696 mA mg^-1 for Pd nanochains. Pd nanosheet assembly also has a lower electron-transfer barrier, better catalytic stability, and antipoisoning performance than that of Pd nanochains. The mechanism of Pd nanosheets and nanochains catalysts the enhanced electrocatalytic activity toward ethanol oxidation has been discussed based on the experimental data.

Effect of Pd on the Electrocatalytic Activity of Pt towards Oxidation of Ethanol in Alkaline Solutions

The understanding of electrocatalytic activity and poisoning resistance properties of Pt and Pd nanoparticles, recognized as the best electrocatalysts for the ethanol oxidation reaction, is an essential step for the commercialization of direct ethanol fuel cells (DEFCs). In this paper, mono and bimetallic Pt and Pd nanoparticles with different atomic ratios have been synthesized to study their electrocatalytic properties for an ethanol oxidation reaction in alkaline solutions. The different nanoparticles were physiochemically characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The electrochemical characterization was performed by cyclic voltammetry and chronoamperometry measurements. The electrochemical measurements indicate that Pt nanoparticles have much higher electrocatalytic activity for ethanol oxidation than Pd nanoparticles. The studies with bimetallic PtPd nanoparticles showed a significant impact of their composition on the ethanol oxidation. Thus, the highest electrocatalytic activity and poisoning resistance properties were obtained for Pt3Pd2 nanoparticles. Moreover, this study demonstrates that the poisoning of the catalyst surface through ethanol oxidation is related to the prevalence of the acetaldehyde–acetate route and the polymerization of acetaldehyde through aldol condensation in the alkaline media.

Interstitial and substitutional light elements in transition metals for heterogeneous catalysis

The addition of foreign element dopants to monometallic nanoparticle catalysts is of great importance in industrial applications. Both substitutional and interstitial doping of pure metallic phases can give profound effects such as altering electronic and transport properties, lattice parameters, phase transitions, and consequently various physicochemical properties. For transition metal catalysts, this often leads to changes in catalytic activity and selectivity. This article provides an overview of the recent developments regarding the catalytic properties and characterisation of such systems. In particular, the structure-activity relationship for a number of important chemical reactions is summarised and the future prospects of this area are also explored.

Ternary metal-metalloid-nonmetal alloy nanowires: a novel electrocatalyst for highly efficient ethanol oxidation electrocatalysis

We report rational design and syntheses of ternary noble metal-metalloid-nonmetal alloy nanowires (NWs) as a novel electrocatalyst for electrochemical ethanol oxidation reaction (EOR). This novel electrocatalyst is formed in an aqueous solution via anisotropic nucleation and growth of ternary PdBP alloy NWs along assembled cylinder template of Plurolic F127 on a nitrogen-functionalized graphene support (denoted as PdBP NWs@N-G). We find that uniformly alloying B and P intrinsically modulates the electronic states of Pd catalyst and also introduces new functions into the catalyst, while NW structure supported on the N-G exposes more electrocatalytic active sites and accelerates electron/mass transfers. Such add-in synergies of PdBP NWs@N-G kinetically facilitate the removal and/or further oxidation of CO-based poisoning intermediates, thus remarkably enhancing the electrocatalytic EOR performance. They exhibit a high mass activity of 4.15 A mg_Pd^-1 and superior cycling and chronoamperometric stability for electrocatalytic EOR, much better than previously reported monometallic Pd-based nanocatalysts. More interestingly, this design strategy can be easily extended to develop more sophisticated NWs catalysts with more compositions (for example quaternary PdCuBP NWs@N-G) that further tunes the electronic and bifuntional effects for various desired catalysis and electrocatalysis.

A Phosphorus-Doped Ag@Pd Catalyst for Enhanced CC Bond Cleavage during Ethanol Electrooxidation

Ethanol is preferred to be oxidized into CO₂ for the construction of a high-performance direct ethanol fuel cell since this complete ethanol oxidation reaction (EOR) transfers 12 electrons. However, this EOR is sluggish and has the low activity as well as poor selectivity. To promote such a favorable EOR, more exactly the cleavage selectivity of CC bonds in ethanol, phosphorus-doped silver-core-and-Pd-shell catalysts (denoted as Ag@PdP) are designed and synthesized. In the alkaline media, a Ag@Pd₂ P_0.2 catalyst is superior toward EOR into CO₂ . It exhibits seven times higher mass activity and six times higher selectivity than the benchmark Pd/C catalyst. As confirmed by means of density functional theory calculation and in situ Fourier-transform infrared spectroscopy, such high performance stems from an increased adsorption energy of OH radicals on the Pd active sites. Meanwhile, the tensile strain effect of a core-shell structure of this Ag@Pd₂ P_0.2 catalyst favors the formation of adsorbed CH₃ CO intermediate, the key species for the enhanced C-C cleavage into CO₂ , instead of acetate. The proposed way to design and synthesize such high-performance EOR catalysts will explore the practical applications of direct alkaline ethanol fuel cells.

Synthesis of Palladium-Based Crystalline@Amorphous Core-Shell Nanoplates for Highly Efficient Ethanol Oxidation

Phase engineering of nanomaterials (PEN) offers a promising route to rationally tune the physicochemical properties of nanomaterials and further enhance their performance in various applications. However, it remains a great challenge to construct well-defined crystalline@amorphous core-shell heterostructured nanomaterials with the same chemical components. Herein, the synthesis of binary (Pd-P) crystalline@amorphous heterostructured nanoplates using Cu_{3- χ} P nanoplates as templates, via cation exchange, is reported. The obtained nanoplate possesses a crystalline core and an amorphous shell with the same elemental components, referred to as c-Pd-P@a-Pd-P. Moreover, the obtained c-Pd-P@a-Pd-P nanoplates can serve as templates to be further alloyed with Ni, forming ternary (Pd-Ni-P) crystalline@amorphous heterostructured nanoplates, referred to as c-Pd-Ni-P@a-Pd-Ni-P. The atomic content of Ni in the c-Pd-Ni-P@a-Pd-Ni-P nanoplates can be tuned in the range from 9.47 to 38.61 at%. When used as a catalyst, the c-Pd-Ni-P@a-Pd-Ni-P nanoplates with 9.47 at% Ni exhibit excellent electrocatalytic activity toward ethanol oxidation, showing a high mass current density up to 3.05 A mg_Pd ^-1 , which is 4.5 times that of the commercial Pd/C catalyst (0.68 A mg_Pd ^-1 ).

Polymer fiber membrane-based direct ethanol fuel cell with Ni-doped SnO2 promoted Pd/C catalyst

The PFM-based DEFC with as-prepared Pd/Ni–SnO₂/C as the anode catalyst and porous NiCo₂O₄ as the cathode catalyst delivers encouraging properties.

Multinary PtPdNiP truncated octahedral mesoporous nanocages for enhanced methanol oxidation electrocatalysis

Multinary PtPdNiP TOMNs have been synthesized for the electrocatalytic methanol oxidation reaction with a superior electrocatalytic performance.

Structure-Property-Performance Relationship of Ultrathin Pd-Au Alloy Catalyst Layers for Low-Temperature Ethanol Oxidation in Alkaline Media

Pd-containing alloys are promising materials for catalysis. Yet, the relationship of the structure-property performance strongly depends on their chemical composition, which is currently not fully resolved. Herein, we present a physical vapor deposition methodology for developing Pd_xAu_1-x alloys with fine control over the chemical composition. We establish direct correlations between the composition and these materials' structural and electronic properties with its catalytic activity in an ethanol (EtOH) oxidation reaction. By combining X-ray diffraction (XRD) and X-ray photelectron spectroscopy (XPS) measurements, we validate that the Pd content within both bulk and surface compositions can be finely controlled in an ultrathin-film regime. Catalytic oxidation of EtOH on the Pd_xAu_1-x electrodes presents the largest forward-sweeping current density for x = 0.73 at ∼135 mA cm^-2, with the lowest onset potential and largest peak activity of 639 A g_Pd^-1 observed for x = 0.58. Density functional theory (DFT) calculations and XPS measurements demonstrate that the valence band of the alloys is completely dominated by Pd particularly near the Fermi level, regardless of its chemical composition. Moreover, DFT provides key insights into the Pd_xAu_1-x ligand effect, with relevant chemisorption activity descriptors probed for a large number of surface arrangements. These results demonstrate that alloys can outperform pure metals in catalytic processes, with fine control of the chemical composition being a powerful tuning knob for the electronic properties and, therefore, the catalytic activity of ultrathin Pd_xAu_1-x catalysts. Our high-throughput experimental methodology, in connection with DFT calculations, provides a unique foundation for further materials' discovery, including machine-learning predictions for novel alloys, the development of Pd-alloyed membranes for the purification of reformate gases, binder-free ultrathin electrocatalysts for fuel cells, and room temperature lithography-based development of nanostructures for optically driven processes.

Single step synthesis of bio-inspired NiO/C as Pd support catalyst for dual application: Alkaline direct ethanol fuel cell and CO2 electro-reduction

Carbon dioxide (CO₂) is considered a useful greenhouse gas that can be captured and be used in the electro-syntheses of useful chemicals or fuels. On the other hand, there's also a tremendous interest on ethanol beneficiation as it is largely produced from crops, and it is regarded as a potential candidate for low temperature fuel cell applications. Although ethanol possesses good advantages, its resistant to oxidation poses a threat. The main objective of the study is to synthesis bio-inspired metal oxide-support catalyst which will help enhance the activity, efficiency and selectivity of Pd catalyst in CO₂ reduction, Fuel cell performance and ethanol oxidation. Here, Pd nanoparticles were supported on NiO/C through a green facile one-step process using pomegranate peel extracts as reducing agent. A series of characterizations were carried out to provide proof for and to quantify the presence of Pd, Ni, O and C in the prepared sample. Microscopic methods confirmed the successful preparation of pure NiO/C and (%5 Pd) Pd-NiO/C, evident by the key elemental components, mixed nanostructures and co-existence of Pd and NiO/C. The resultant Pd-NiO/C nanocatalyst revealed higher activity towards the oxidation of ethanol and that the nanocatalyst is more tolerant to poising by intermediate oxidation species. Enhanced cell performance with current and power densities of 66 mA cm^-2 and 26 mW cm^-2 relative to the commercial Pd/C were obtained under passive conditions at 1 M ethanol in 1MKOH. In addition, the nanocatalyst showed good selectivity to HCOOH with enhanced current efficiencies of 45%.

Nanocatalysts for Electrocatalytic Oxidation of Ethanol

The use of ethanol as a fuel in direct alcohol fuel cells depends not only on its ease of production from renewable sources, but also on overcoming the challenges of storage and transportation. In an ethanol-based fuel cell, highly active electrocatalysts are required to break the C-C bond in ethanol for its complete oxidation at lower overpotentials, with the aim of increasing the cell performance, ethanol conversion rates, and fuel efficiency. In recent decades, the development of wet-chemistry methods has stimulated research into catalyst design, reactivity tailoring, and mechanistic investigations, and thus, created great opportunities to achieve efficient oxidation of ethanol. In this Minireview, the nanomaterials tested as electrocatalysts for the ethanol oxidation reaction in acid or alkaline environments are summarized. The focus is mainly on nanomaterials synthesized by using wet-chemistry methods, with particular attention on the relationship between the chemical and physical characteristics of the catalysts, for example, catalyst composition, morphology, structure, degree of alloying, presence of oxides or supports, and their activity for ethanol electro-oxidation. As potential alternatives to noble metals, non-noble-metal catalysts for ethanol oxidation are also briefly reviewed. Insights into further enhancing the catalytic performance through the design of efficient electrocatalysts are also provided.