On the factors influencing the performance of solar reactors for water disinfection with photosensitized singlet oxygen

Synergistic photogeneration of nitric oxide and singlet oxygen by nanofiber membranes via blue and/or red-light irradiation: Strong antibacterial action

New functionalities were added to biocompatible polycaprolactone nanofiber materials through the co-encapsulation of chlorin e6 trimethyl ester (Ce6) photogenerating singlet oxygen and absorbing light both in the blue and red regions, and using 4-(N-(aminopropyl)-3-(trifluoromethyl)-4-nitrobenzenamine)-7-nitrobenzofurazan, NO-photodonor (NOP), absorbing light in the blue region of visible light. Time-resolved and steady-state luminescence, as well as absorption spectroscopy, were used to monitor both photoactive compounds. The nanofiber material exhibited photogeneration of antibacterial species, specifically nitric oxide and singlet oxygen, upon visible light excitation. This process resulted in the efficient photodynamic inactivation of E. coli not only close to nanofiber material surfaces due to short-lived singlet oxygen, but even at longer distances due to diffusion of longer-lived nitric oxide. Interestingly, nitric oxide was also formed by processes involving photosensitization of Ce6 during irradiation by red light. This is promising for numerous applications, especially in the biomedical field, where strictly local photogeneration of NO and its therapeutic benefits can be applied using excitation in the "human body phototherapeutic window" (600-850 nm). Generally, due to the high permeability of red light, the photogeneration of NO can be achieved in any aqueous environment where direct excitation of NOP to its absorbance in the blue region is limited.

Superhydrophobic Tipped Antimicrobial Photodynamic Therapy Device for the In Vivo Treatment of Periodontitis Using a Wistar Rat Model

Limited options exist for treatment of periodontitis; scaling and root planing (SRP) are not sufficient to eradicate P. gingivalis and the resulting inflammatory disease. Chlorhexidine (CHX), used as an adjuvant to SRP, may reduce bacterial loads but leads to pain and staining, while evidence for its efficacy is lacking. Antibiotics are effective but can lead to drug-resistance. The rising concern of antibiotic resistance limits the future use of this treatment approach. This study evaluates the efficacy of a novel superhydrophobic (SH) antimicrobial photodynamic therapy (aPDT) device as an adjuvant to SRP for the treatment of periodontitis induced in a Wistar rat in vivo model relative to CHX. The SH-aPDT device comprises an SH silicone rubber strip coated with verteporfin photosensitizer (PS), sterilized, and secured onto a tapered plastic optical fiber tip connected to a red diode laser. The superhydrophobic polydimethylsiloxane (PDMS) strips were fabricated by using a novel soluble template method that creates a medical-grade elastomer with hierarchical surface roughness without the use of nanoparticles. Superhydrophobicity minimizes direct contact of the PS-coated surface with bacterial biofilms. Upon insertion of the device tip into the pocket and energizing the laser, the device generates singlet oxygen that effectively targets and eliminates bacteria within the periodontal pocket. SH-aPDT treatment using 125 J/cm2 of red light on three consecutive days reduced P. gingivalis significantly more than SRP-CHX controls (p < 0.05). Clinical parameters significantly improved (p < 0.05), and histology and stereometry results demonstrated SH-aPDT to be the most effective treatment for improving healing and reducing inflammation, with an increase in fibroblast cells and extracellular matrix and a reduction in vascularization, inflammatory cells, and COX-2 expression. The SH-aPDT approach resulted in complete disease clearance assessed 30 days after treatment initiation with significant reduction of the periodontal pocket and re-formation of the junctional epithelium at the enamel-cementum junction. PS isolation on a SH strip minimizes the potential for bacteria to develop resistance, where the treatment may be aided by the oxygen supply retained within the SH surface.

Realism-based assessment of the efficacy of potassium peroxymonosulphate on Stenotrophomonas maltophilia biofilm control

The potential of pentapotassium bis(peroxymonosulphate) bis(sulphate) (OXONE) to control biofilms in drinking water distribution systems (DWDS) was evaluated and compared to chlorine disinfection. Mature biofilms of drinking water (DW)-isolated Stenotrophomonas maltophilia were formed using a simulated DWDS with a rotating cylinder reactor (RCR). After 30 min of exposure, OXONE at 10 × minimum bactericidal concentration (MBC) caused a significant 4 log reduction of biofilm culturability in comparison to the unexposed biofilms and a decrease in the number of non-damaged cells below the detection limit (4.8 log cells/cm2). The effects of free chlorine were restricted to approximately 1 log reduction in both biofilm culturability and non-damaged cells. OXONE in synthetic tap water (STW) at 25 ºC was more stable over 40 days than free chlorine in the same conditions. OXONE solution exhibited a disinfectant decrease of about 10% of the initial concentration during the first 9 days, and after this time the values remained stable. Whereas possible reaction of chlorine with inorganic and organic substances in STW contributed to free chlorine depletion of approximately 48% of the initial concentration. Electron paramagnetic resonance (EPR) spectroscopy studies confirmed the presence of singlet oxygen and other free radicals during S. maltophilia disinfection with OXONE. Overall, OXONE constitutes a relevant alternative to conventional DW disinfection for effective biofilm control in DWDS.

Development of water-soluble phenazine-2,3-diol-based photosensitizers for singlet oxygen generation

Phenazine-2,3-diol-based dyes, KY-1Na and KY-2Na bearing one and two carboxylic acid sodium salts, respectively, have been newly developed as water-soluble photosensitizers (PSs) possessing the ability to generate singlet oxygen (¹O₂). In order to evaluate the solubility of KY-1Na and KY-2Na in water, the hydrophobicity/hydrophilicity of the two PSs was investigated by experimental measurement of the logarithms (log P_o/w) of the 1-octanol/water partition coefficient (P_o/w) for the PS. The log P_o/w values of both KY-1Na and KY-2Na were determined to be -0.9, indicating that both the PSs are more hydrophilic than Rose Bengal (-0.6) and have hydrophilicity equivalent to methylene blue (-0.9). Both the PSs in water show a broad photoabsorption band in the range of 500 to 600 nm. Thus, we estimated the ¹O₂ quantum yields (Φ_Δ) of KY-1Na and KY-2Na in water by using 9,10-anthracenediyl-bis(methylene)dimalonic acid (ABDA) as a water-soluble ¹O₂ scavenger. It was found that in water the Φ_Δ value (0.19) of KY-2Na is higher than that of KY-1Na (0.06). Density functional theory (DFT) calculations suggested that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributions for the molecular structure of KY-2Na are adequately separated, leading to a decrease in the energy gap (ΔE_ST) between the singlet state (S₁) and the triplet state (T₁) that causes efficient intersystem crossing (ISC), compared to that for the molecular structure of KY-1Na. Indeed, time-dependent DFT (TD-DFT) calculations demonstrated that the ΔE_ST(S₁-T₁) value (0.82 eV) of KY-2Na is smaller than that (0.98 eV) of KY-1Na, resulting in a relatively high Φ_Δ value of KY-2Na. Consequently, we demonstrate that phenazine-2,3-diol-based PSs bearing carboxylic acid salts possess high solubility and moderate ¹O₂ generation ability in water.

Magnetically Separable Photoactive Nanofiber Membranes for Photocatalytic and Antibacterial Applications

We have prepared photoactive multifunctional nanofiber membranes via the simple electrospinning method. The antibacterial and photocatalytic properties of these materials are based on the generation of singlet oxygen formed by processes photosensitized by the tetraphenylporphyrin encapsulated in the nanofibers. The addition of magnetic features in the form of magnetic maghemite (γ-Fe₂O₃) nanoparticles stabilized by polyethylenimine enables additional functionalities, namely, the postirradiation formation of hydrogen peroxide and improved photothermal properties. This hybrid material allows for remote manipulation by a magnetic field, even in hazardous and/or highly microbial contaminant environments.

Practical Aspects in the Study of Biological Photosensitization Including Reaction Mechanisms and Product Analyses: A Do's and Don'ts Guide†

The interaction of light with natural matter leads to a plethora of photosensitized reactions. These reactions cause the degradation of biomolecules, such as DNA, lipids, proteins, being therefore detrimental to the living organisms, or they can also be beneficial by allowing the treatment of several diseases by photomedicine. Based on the molecular mechanistic understanding of the photosensitization reactions, we propose to classify them in four processes: oxygen-dependent (type I and type II processes) and oxygen-independent [triplet-triplet energy transfer (TTET) and photoadduct formation]. In here, these processes are discussed by considering a wide variety of approaches including time-resolved and steady-state techniques, together with solvent, quencher, and scavenger effects. The main aim of this survey is to provide a description of general techniques and approaches that can be used to investigate photosensitization reactions of biomolecules together with basic recommendations on good practices. Illustration of the suitability of these approaches is provided by the measurement of key biomarkers of singlet oxygen and one-electron oxidation reactions in both isolated and cellular DNA. Our work is an educational review that is mostly addressed to students and beginners.

Electro-activation of peroxymonosulfate by a graphene oxide/iron oxide nanoparticle-doped Ti4O7 ceramic membrane: mechanism of singlet oxygen generation in the removal of 1,4-dioxane

Electro-activation of peroxymonosulfate (PMS) has been widely investigated for the degradation of organic pollutants. Herein, we employ graphene oxide (GO)/Fe₃O₄ nanoparticles (NPs) doped into a Ti₄O₇ reactive electrochemical membrane through strong chemical bonding as the cathode to activate PMS for the degradation of 1,4-dioxane (1,4-D). The strong chemical interaction between GO, Fe₃O₄-NPs, and Ti₄O₇ via Fe-O---GO---O-Ti bonds enhances the electron-transfer efficiency and provides catalytically active sites that boost the electro-activation of PMS. As a result, the 1,4-D oxidation rate of the GO/Fe₃O₄-NPs@Ti₄O₇ REM cathode is ~3 times higher (7.21 × 10^-3 min^-1) than those of other Ti₄O₇ ceramic membranes, and ¹O₂ plays a key role (59.9%) in the degradation of 1,4-D. The ¹O₂ generation mechanism in the electro-activation process of PMS was systematically investigated, and we claimed that ¹O₂ is mainly generated from the precursors H₂O₂ and O₂^•-/HO₂^• rather than by O₂ or ^•OH, as has been reported in previous studies. A flow-through mode test in the PMS electro-activation system is firstly reported, and the 1,4-D decay efficiency is 7.1 times higher than that obtained by a flow-by mode, showing that an improved PMS mass transfer efficiency enhances the conversion to reactive oxygen species.

Rapid pollutant degradation by peroxymonosulfate via an unusual mediated-electron transfer pathway under spatial-confinement

Nano-confinement systems offer various extraordinary chemical/physical properties, due to the spatial restriction and the electronic interaction between the confined species and the surrounding medium. They are, therefore, providing rich opportunities for the design of efficient catalytic reaction systems for pollutant removal. Herein, a highly efficient mediated-electron transfer pathway is identified on a spatially-confined zero valent cobalt for abatement of the organic pollutants by PMS. The catalyst showed efficient catalytic performance in both batch and a flow reactor for degradation of various pollutants, e.g., a degradation reaction constant of 0.052 s⁻¹ for sulfamethoxazole and 0.041 s⁻¹ for BPA. Regulated by the spatial-confinement, a distinctive inverse relationship between PMS decomposition rate and the electron density of the pollutant molecule was experimentally substantiated, e.g., in the presence of the electron-rich sulfamethoxazole, PMS decomposed slower than that with BPA, while in the presence of electron deficient diphenhydramine, PMS decomposed faster than that with BPA. The unique reaction mechanism endows the spatially-confined cobalt with the capability of eliminating the priority pollutants in the complex water matrix with pervasive halide ions and natural organic matter (NOM) via PMS activation.

A highly efficient mediated-electron transfer process of PMS activation on Co was achieved by construction of a spatially-confined reaction environment.

Mechanistic Insight into the Reactivities of Aqueous-Phase Singlet Oxygen with Organic Compounds

Singlet oxygen (¹O₂) is a selective reactive oxygen species that plays a key role for the fate of various organic compounds in the aquatic environment under sunlight irradiation, engineered water oxidation systems, atmospheric water droplets, and biomedical systems. While the initial rate-determining charge-transfer reaction mechanisms and kinetics of ¹O₂ have been studied extensively, no comprehensive studies have been performed to elucidate the reaction mechanisms with organic compounds that have various functional groups. In this study, we use density functional theory calculations to determine elementary reaction mechanisms with a wide variety of organic compounds. The theoretically calculated aqueous-phase free energies of activation of single electron transfer and ¹O₂ addition reactions are compared to the experimentally determined rate constants in the literature to determine linear free-energy relationships. The theoretically calculated free energies of activation for the groups of phenolates and phenols show excellent correlations with the Hammett constants that accept electron densities by through-resonance. The dominant elementary reaction mechanism is discussed for each group of compounds. As a practical implication, we demonstrate the fate of environmentally relevant organic compounds induced by photochemically produced intermediate species at different pH and evaluate the impact of predicting rate constants to the half-life.

Photoactive rose bengal-based latex via RAFT emulsion polymerization-induced self-assembly

Rose bengal shell- or core-functionalized acrylic latex synthesized by RAFT emulsion PISA: interfacial photosensitized ¹O₂ production under visible light.

Role of Tryptophan Residues in the Toxicity and Photosensitized Inactivation of Escherichia coli α-Hemolysin

α-Hemolysin (HlyA) is an extracellular protein toxin secreted by uropathogenic strains of Escherichia coli that inserts into membranes of eukaryotic cells. The main goal of this work was to investigate the involvement of tryptophan (W) residues in the hemolytic activity of HlyA. We investigated the hemolytic activity of six single-point mutant proteins, in which one of the four Ws was replaced by cysteine (C) or leucine (L). We also analyzed the photoinactivation of HlyA with pterin (Ptr), an endogenous photosensitizer, as a method of unspecific oxidation of W and tyrosine (Y) residues. HlyA photoinactivation was analyzed by ultraviolet-visible spectrophotometry, hemolytic activity measurement, fluorescence spectroscopy, and electrophoretic analysis. The results indicate that Ws are important in the hemolytic process. Specifically, the chemical structure of the amino acid at position 578 is important for the acylation of HlyA at residue K563. Furthermore, the exposure of HlyA to ultraviolet radiation, with energy similar to that experienced under sun exposure, in the presence of Ptr induces the inactivation of the toxin, causing chemical changes in, at least, W and Y, the rate of damage to W residues being faster than that observed for Y residues. This work not only deepens our understanding of the structure-function relationship of the toxin but also introduces the possibility of using photoinactivation of HlyA for potential applications such as obtaining innocuous molecules for vaccine production and the elimination of the toxin from contaminated surfaces and drinking water.

Persulfate-Based Advanced Oxidation: Critical Assessment of Opportunities and Roadblocks

Reports that promote persulfate-based advanced oxidation process (AOP) as a viable alternative to hydrogen peroxide-based processes have been rapidly accumulating in recent water treatment literature. Various strategies to activate peroxide bonds in persulfate precursors have been proposed and the capacity to degrade a wide range of organic pollutants has been demonstrated. Compared to traditional AOPs in which hydroxyl radical serves as the main oxidant, persulfate-based AOPs have been claimed to involve different in situ generated oxidants such as sulfate radical and singlet oxygen as well as nonradical oxidation pathways. However, there exist controversial observations and interpretations around some of these claims, challenging robust scientific progress of this technology toward practical use. This Critical Review comparatively examines the activation mechanisms of peroxymonosulfate and peroxydisulfate and the formation pathways of oxidizing species. Properties of the main oxidizing species are scrutinized and the role of singlet oxygen is debated. In addition, the impacts of water parameters and constituents such as pH, background organic matter, halide, phosphate, and carbonate on persulfate-driven chemistry are discussed. The opportunity for niche applications is also presented, emphasizing the need for parallel efforts to remove currently prevalent knowledge roadblocks.

Methylthio BODIPY as a standard triplet photosensitizer for singlet oxygen production: a photophysical study

A complete photophysical study on the iodinated-BODIPY, 3,5-dimethyl-2,6-diiodo-8-thiomethyl-pyrromethene (MeSBDP), demonstrated that it is an excellent triplet photosensitizer for singlet oxygen production in a broad range of apolar and polar solvents. Besides its absorption and fluorescence emission spectra, the dynamics of its excited states including its intersystem crossing rate was characterized by femtosecond transient experiments. The photophysical study of its triplet state by nanosecond transient absorption spectroscopy and phosphorescence emission concluded to a diffusion-controlled quenching of 3MeSBDP by O2 and to a fraction of triplet state quenching by O2 close to unity. The high (>0.87) and solvent-insensitive singlet oxygen quantum yield φΔ measured by singlet oxygen phosphorescence emission, together with the noticeable photostability of MeSBSP, as well as the absence of quenching of singlet oxygen by MeSBDP itself, allows claiming it as an alternative standard photosensitizer for singlet oxygen production, under excitation either in the UV or in the visible range.

Antibacterial application of covalently immobilized photosensitizers on a surface

Singlet oxygen produced by irradiating photosensitizers (PSs) can be used to kill pathogens during water treatment. Chemical immobilization of the PSs on surfaces can maintain their disinfection function long-term. In this study, two model PSs (rose bengal (RB) and hematoporphyrin (HP)) were immobilized on a glass surface using a silane coupling agent with an epoxide group, and their antibacterial properties were analyzed. Fourier transform infrared spectroscopy demonstrated that a covalent bond formed between the epoxide group and hydroxyl group in the PSs. A large proportion of the immobilized PSs (approximately 50%) was active in singlet oxygen production, which was evidenced by a comparative analysis with free PSs. RB was more effective at producing singlet oxygen than HP. The immobilized PSs were durable in terms of repeated use. On the other hand, singlet oxygen produced by the PSs was effective at killing bacteria, mostly for Gram-positive bacteria (> 90% death for 2 h of irradiation), by damaging the cell membrane. The preferable antibacterial property against Gram-positive bacteria compared with that against Gram-negative bacteria suggested efficient penetrability of singlet oxygen across the cell membrane, which led to cell death. Taken together, it was concluded that immobilization of PSs on surfaces using the silane coupling agent proposed in this study was effective at killing Gram-positive bacteria by forming singlet oxygen.

Edible Dye-Enhanced Solar Disinfection with Safety Indication

The rural developing world faces disproportional inequity in drinking water access, where point-of-use water treatment technologies often fail to achieve adequate levels of pathogen removal, especially for viruses. Solar disinfection (SODIS) is practiced because of its universal applicability and low implementation cost, though the excessively long treatment time and lack of safety indication hinder wider implementation. This study presents an enhanced SODIS scheme that utilizes erythrosine-a common food dye-as a photosensitizer to produce singlet oxygen for virus inactivation and to indicate the completion of water disinfection through photobleaching color change. Experimental results and predictions based on global solar irradiance data suggest that over 99.99% inactivation could be achieved within 5 min in the majority of developing countries, reducing the time for SODIS by 2 orders of magnitude. Preserving the low cost of traditional SODIS, erythrosine embodies edible dye-enhanced SODIS, an efficient water disinfection method that could potentially be used by governments and non-governmental organizations to improve drinking water quality in rural developing communities.

Revisiting Current Photoactive Materials for Antimicrobial Photodynamic Therapy

Microbial infection is a severe concern, requiring the use of significant amounts of antimicrobials/biocides, not only in the hospital setting, but also in other environments. The increasing use of antimicrobial drugs and the rapid adaptability of microorganisms to these agents, have contributed to a sharp increase of antimicrobial resistance. It is obvious that the development of new strategies to combat planktonic and biofilm-embedded microorganisms is required. Photodynamic inactivation (PDI) is being recognized as an effective method to inactivate a broad spectrum of microorganisms, including those resistant to conventional antimicrobials. In the last few years, the development and biological assessment of new photosensitizers for PDI were accompanied by their immobilization in different supports having in mind the extension of the photodynamic principle to new applications, such as the disinfection of blood, water, and surfaces. In this review, we intended to cover a significant amount of recent work considering a diversity of photosensitizers and supports to achieve an effective photoinactivation. Special attention is devoted to the chemistry behind the preparation of the photomaterials by recurring to extensive examples, illustrating the design strategies. Additionally, we highlighted the biological challenges of each formulation expecting that the compiled information could motivate the development of other effective photoactive materials.

Photosensitized oxidation of 2′-deoxyguanosine 5′-monophosphate: mechanism of the competitive reactions and product characterization

We have identified five products containing oxidized guanine and another product containing an intact guanine moiety and a modified one.

Controlled Delivery of Extracellular ROS Based on Hematoporphyrin-Incorporated Polyurethane Film for Enhanced Proliferation of Endothelial Cells

The principle of photodynamic treatment (PDT) involves the administration of photosensitizer (PS) at diseased tissues, followed by light irradiation to produce reactive oxygen species (ROS). In cells, a moderate increase in ROS plays an important role as signaling molecule to promote cell proliferation, whereas a severe increase of ROS causes cell damage. Previous studies have shown that low levels of ROS stimulate cell growth through PS drugs-treating PDT and nonthermal plasma treatment. However, these methods have side effects which are associated with low tissue selectivity and remaining of PS residues. To overcome such shortcomings, we designed hematoporphyrin-incorporated polyurethane (PU) film induced generation of extracellular ROS with singlet oxygen and free radicals. The film can easily control ROS production rate by regulating several parameters including light dose, PS dose. Also, its use facilitates targeted delivery of ROS to the specific lesion. Our study demonstrated that extracellular ROS could induce the formation of intracellular ROS. In vascular endothelial cells, a moderated increase in intracellular ROS also stimulated cell proliferation and cell cycle progression by accurate control of optimum levels of ROS with hematoporphyrin-incorporated polymer films. This modulation of cellular growth is expected to be an effective strategy for the design of next-generation PDT.

Thymidine radical formation via one-electron transfer oxidation photoinduced by pterin: Mechanism and products characterization

UV-A radiation (320-400nm), recognized as a class I carcinogen, induces damage to the DNA molecule and its components through different mechanisms. Pterin derivatives are involved in various biological functions, including enzymatic processes, and it has been demonstrated that oxidized pterins may act as photosensitizers. In particular, they accumulate in the skin of patients suffering from vitiligo, a chronic depigmentation disorder. We have investigated the ability of pterin (Ptr), the parent compound of oxidized pterins, to photosensitize the degradation of the pyrimidine nucleotide thymidine 5'-monophosphate (dTMP) in aqueous solutions under UV-A irradiation. Although thymine is less reactive than purine nucleobases, our results showed that Ptr is able to photoinduce the degradation of dTMP and that the process is initiated by an electron transfer from the nucleotide to the triplet excited state of Ptr. In the presence of molecular oxygen, the photochemical process leads to the oxidation of dTMP, whereas Ptr is not consumed. In the absence of oxygen, both compounds are consumed to yield a product in which the pterin moiety is covalently linked to the thymine. This compound retains some of the spectroscopic properties of Ptr, such as absorbance in the UV-A region and fluorescence properties.

Materials for selective photo-oxygenation vs. photocatalysis: preparation, properties and applications in environmental and health fields

Photosensitizing materials made of organic dyes embedded in various supports are compared to usual supported TiO₂-based photocatalysts.

Unraveling the Degradation Mechanism of Purine Nucleotides Photosensitized by Pterins: The Role of Charge-Transfer Steps

Photosensitized reactions contribute to the development of skin cancer and are used in many applications. Photosensitizers can act through different mechanisms. It is currently accepted that if the photosensitizer generates singlet molecular oxygen ((1) O2 ) upon irradiation, the target molecule can undergo oxidation by this reactive oxygen species and the reaction needs dissolved O2 to proceed, therefore the reaction is classified as (1) O2 -mediated oxidation (type II mechanism). However, this assumption is not always correct, and as an example, a study on the degradation of 2'-deoxyguanosine 5'-monophosphate photosensitized by pterin is presented. A general mechanism is proposed to explain how the degradation of biological targets, such as nucleotides, photosensitized by pterins, naturally occurring (1) O2 photosensitizers, takes place through an electron-transfer-initiated process (type I mechanism), whereas the contribution of the (1) O2 -mediated oxidation is almost negligible.

Bacterial inactivation by a singlet oxygen bubbler: identifying factors controlling the toxicity of (1)O2 bubbles

A microphotoreactor device was developed to generate bubbles (1.4 mm diameter, 90 μL) containing singlet oxygen at levels toxic to bacteria and fungus. As singlet oxygen decays rapidly to triplet oxygen, the bubbles leave behind no waste or byproducts other than O(2). From a comparative study in deaerated, air saturated, and oxygenated solutions, it was reasoned that the singlet oxygen bubbles inactivate Escherichia coli and Aspergillus fumigatus, mainly by an oxygen gradient inside and outside of the bubble such that singlet oxygen is solvated and diffuses through the aqueous solution until it reacts with the target organism. Thus, singlet oxygen bubble toxicity was inversely proportional to the amount of dissolved oxygen in solution. In a second mechanism, singlet oxygen interacts directly with E. coli that accumulate at the gas-liquid interface although this mechanism operates at a rate approximately 10 times slower. Due to encapsulation in the gaseous core of the bubble and a 0.98 ms lifetime, the bubbles can traverse relatively long 0.39 mm distances carrying (1)O(2) far into the solution; by comparison the diffusion distance of (1)O(2) fully solvated in H(2)O is much shorter (~150 nm). Bubbles that reached the outer air-water interface contained no (1)O(2). The mechanism by which (1)O(2) deactivated organisms was explored through the addition of detergent molecules and Ca(2+) ions. Results indicate that the preferential accumulation of E. coli at the air-water interface of the bubble leads to enhanced toxicity of bubbles containing (1)O(2). The singlet oxygen device offers intriguing possibilities for creating new types of disinfection strategies based on photodynamic ((1)O(2)) bubble carriers.

Generating singlet oxygen bubbles: a new mechanism for gas-liquid oxidations in water

Laser-coupled microphotoreactors were developed to bubble singlet oxygen [(1)O(2) ((1)Δ(g))] into an aqueous solution containing an oxidizable compound. The reactors consisted of custom-modified SMA fiberoptic receptacles loaded with 150 μm silicon phthalocyanine glass sensitizer particles, where the particles were isolated from direct contact with water by a membrane adhesively bonded to the bottom of each device. A tube fed O(2) gas to the reactor chambers. In the presence of O(2), singlet oxygen was generated by illuminating the sensitizer particles with 669 nm light from an optical fiber coupled to the top of the reactor. The generated (1)O(2) was transported through the membrane by the O(2) stream and formed bubbles in solution. In solution, singlet oxygen reacted with probe compounds (9,10-anthracene dipropionate dianion, trans-2-methyl-2-pentanoate anion, N-benzoyl-D,L-methionine, or N-acetyl-D,L-methionine) to give oxidized products in two stages. The early stage was rapid and showed that (1)O(2) transfer occurred via bubbles mainly in the bulk water solution. The later stage was slow; it arose only from (1)O(2)-probe molecule contact at the gas/liquid interface. A mechanism is proposed that involves (1)O(2) mass transfer and solvation, where smaller bubbles provide better penetration of (1)O(2) into the flowing stream due to higher surface-to-volume contact between the probe molecules and (1)O(2).

Degradation of rhodamine B using an unconventional graded photoelectrode with wedge structure

A graded TiO(2)/Ti round disk photoelectrode with a wedge structure is proposed, fabricated, and used in a rotating disk photoelectrocatalytic (PEC) reactor for the first time. In addition to improved light utilization efficiency resulting from multiple reflections of radiation light on the wedge surface, enlarged surface area enables the electrode to carry more pollutants for treatment. Compared with the conventional planar electrode with same diameter, the wedge-surface electrode showed much lower light reflectivity (<0.014 versus 0.306), larger photocurrent and better treatment performance. For model dye wastewater containing Rhodamine B (RB) at concentrations ranging from 20 to 150 mg · L(-1), wedge-surface electrode removed 100-79% total color in 60 min and 93-28% COD in 150 min, much higher than 69-28% and 50-4% obtained using the planar electrode under the same experimental conditions. Experimental results demonstrated that the wedge-surface electrode works efficiently and has great potential for treating high concentration dye wastewater.

Photosensitized amino acid degradation in the presence of riboflavin and its derivatives

The addition of photosensitizers to water can accelerate disinfection in sunlight-based systems by enhancing oxidation of target compounds through direct reaction with the excited sensitizer or through production of another oxidant, such as singlet oxygen (¹O₂). The kinetics of the oxidation of selected amino acids in the presence of the sensitizer riboflavin (Vitamin B2), its primary photoproduct lumichrome, and its derivative riboflavin tetraacetate (2',3',4',5'-tetraacetylriboflavin; RTA) were quantified and the mechanisms of reaction were determined during exposure to 365 ± 9 nm light. ¹O₂-mediated reactions contributed to the rapid photodegradation of the four amino acids, but its contribution was sensitizer-dependent and varied from 5.4-10.2% for tyrosine, 7.1-12.4% for tryptophan, 18.7-69.0% for methionine, and 64.7-100.2% for histidine. Riboflavin was subject to rapid photodegradation (t½ < 8 min), while the half-lives of lumichrome and RTA were 100 and 30 times longer, respectively. Lumichrome and RTA also were more efficient ¹O₂ sensitizers (quantum yield (Φ) = 0.63 and 0.66) compared to riboflavin (Φ = 0.48). Of the three flavin-based compounds, RTA shows the most promise as a sensitizer in sunlight-based disinfection systems because it absorbs both visible and UV light, is an efficient ¹O₂ sensitizer, is a strong oxidant in its triplet state, and exhibits greater photostability.

Fiber-optic singlet oxygen [1O2 (1Delta(g))] generator device serving as a point selective sterilizer

Traditionally, Type II heterogeneous photo-oxidations produce singlet oxygen via external irradiation of a sensitizer and external supply of ground-state oxygen. A potential improvement is reported here. A hollow-core fiber-optic device was developed with an "internal" supply of light and flowing oxygen, and a porous photosensitizer-end capped configuration. Singlet oxygen was delivered through the fiber tip. The singlet oxygen steady-state concentration in the immediate vicinity of the probe tip was ca 20 fm by N-benzoyl-DL-methionine trapping. The device is portable and the singlet oxygen-generating tip is maneuverable, which opened the door to simple disinfectant studies. Complete Escherichia coli inactivation was observed in 2 h when the singlet oxygen sensitizing probe tip was immersed in 0.1 mL aqueous samples of 0.1-4.4 x 10(7) cells. Photobleaching of the probe tip occurred after ca 12 h of use, requiring baking and sensitizer reloading steps for reuse.

Solvent-free production of singlet oxygen at the gas-solid interface: visible light activated organic-inorganic hybrid microreactors including new cyanoaromatic photosensitizers

We synthesized new cyanoaromatics, benzo[b]triphenylene-9,14-dicarbonitrile (DBTP) 1a and a graftable derivative, 9,14-dicyanobenzo[b]triphenylene-3-carboxylic acid (DBTP-COOH) 1b, easily prepared from commercial reagents. Their photosensitizing properties were investigated. Hybrid porous silica monoliths loaded with encapsulated 1a or grafted 1b were prepared, and their adsorption, spectroscopic and photosensitizing properties, as well as stability, were compared. Solvent-free, efficient oxidation of dimethylsulfide (DMS) was observed at the gas-solid interface under visible light irradiation. Quantum yields of formation of 1O2 inside the porous monoliths are comparable to those of phenalenone. Singlet oxygen lifetimes (approximately 25 micros) were found to be longer in silica monoliths than in usual polar solvents such as methanol or ethanol. This new class of hybrid materials work as porous, transparent, and highly efficient microreactors for oxidation reactions under visible light.

Photodynamic properties and photoantimicrobial action of electrochemically generated porphyrin polymeric films

Spectroscopic and photodynamic properties of polymeric films bearing porphyrin units have been studied in both solution containing photooxidizable substrates and in vitro on Escherichia coli and Candida albicans microorganisms. The films were formed by electrochemical polymerization of 5,10,15,20-tetra(4-N,N-diphenylaminophenyl)porphyrin (H2P-film) and its complex with Pd(II) (PdP-film) on optically transparent indium tin oxide (ITO) electrodes. Absorption spectroscopic studies show the characteristic Soret and Q bands of the porphyrin in the visible region and a band at approximately 350 nm corresponding to the tetraphenylbenzidine units. Upon excitation, the H2P-film exhibits two bands of fluorescence emission from porphyrin, while it is not detected using PdP-film. The singlet molecular oxygen, O2(1Deltag), productions of these surfaces were evaluated using 9,10-dimethylanthracene in N,N-dimethylformamide. Also, the photodynamic activity was compared in solutions of L-tryptophan. Under these conditions, oxidation of these substrates takes place indicating an efficient photodynamic action of both polymeric films. In vitro investigations show that these films produce photosensitized inactivation of microbial cells in aqueous suspensions. These films exhibit a photosensitizing activity causing a approximately 3 log decrease of E. coil and approximately 2.5 log of C. albicans cellular survival after 30 min of irradiation with visible light. The photodynamic effect of the surfaces was also tested by growth delay experiments. The results indicate that porphyrins immobilized on electropolymeric films are interesting and versatile photodynamic surfaces to inactivate microorganisms in liquid suspensions.