Oil spills abatement: factors affecting oil uptake by cellulosic fibers

Fabrication of outstanding thermal-insulating, mechanical robust and superhydrophobic PP/CNT/sorbitol derivative nanocomposite foams for efficient oil/water separation

Water pollution caused by industrial oily wastewater, is world-widely concerned by both scientific and practical researches, owing to its catastrophic destruction to natural environment, which highlights the urgency of producing green and advanced separation materials. Herein, a novel approach was proposed to fabricate oil-absorbing and oil/water-separating microcellular polypropylene (PP)/carbon nanotubes (CNTs)/sorbitol nanocomposites using a simple, green, and facile microcellular foaming technology. Owning to the effectively modified crystallization via introducing CNTs/sorbitol derivatives, the ultralight and highly-reticulated PP microcellular foam was prepared with an open-cell content of 99.4% and an expansion ratio of 50, which facilitated the creation of nano-porous structures on cell walls. Hence, the as-prepared PP nanocomposite foam presented pronounced absorption capacity of 40 g/g for applied oils with recovery efficiency of 97.2%, superior thermal-insulating and mechanical performance. Furthermore, the as-achieved unique hierarchical porous structures of the PP/CNT/sorbitol foam contributed to the outstanding oil/water separation capability, separation efficiency of up-to 97.6%, ascribed to its superhydrophobicity, capillary penetration action, high porosity and open-cell content. Therefore, this work provided new insight into the feasibility of advantageous, high-efficiency, environmentally friendly, and profitable PP-based foams as oil absorbents, which, to the best of our knowledge, outperform conventional polymer absorbents in treatment of oily wastewater.

Advanced super-hydrophobic polymer-based porous absorbents for the treatment of oil-polluted water

The threat of environmental pollution caused by spilled oil is rapidly increasing along with the expansion of oil exploration, the development of maritime activities and industrial growth. Oil spill incidents usually affect seriously the ecosystem and human life. Therefore, the treatment and recovery of the oil spill have been considered as an ultra-important issue to protect the environment and to minimize its negative impacts on socio-economic activities. Among methods of oil spill recovery, porous materials have emerged as potential absorbents possessing the capacity of absorbing spilled oil at a fast rate, high adsorption capacity, good selectivity, and high reusability. In this review paper, two types of polymer-based porous absorbents modified surface and structure were introduced for the treatment strategy of the oil-polluted water. In addition, the absorption mechanism and factors affecting the adsorption capacity for oils and organic solvents were thoroughly analyzed. More importantly, characteristics of polymer-based porous materials were discussed in detail based on microstructure analysis, absorption efficiency, and reusability. In general, this paper has provided an overview and a comprehensive assessment of the use of advanced polymer-based porous materials for the treatment of oil-polluted water, although the impacts of environmental factors such as wind, wave, and temperature should be further investigated in the future.

Utilization of biodegradable chitosan-derived sponges as oil retainers

An innovative approach of chitosan-derived biodegradable sponges with high sorption capacity, excellent recyclability, and inherent oleophilic properties have been developed for the first time to remove the crude oil polluting the environment. Chitosan-nitrogen mustard ionic carbonate-β-cyclodextrin (CH-NMIC-CD), chitosan-nitrogen mustard ionic carbonate (CH-NMIC), and chitosan (CH) sponges with macropores were prepared using tripolylphosphate (TPP) by adopting subsequent lyophilization. Detailed characterization such as FTIR, TGA, XRD, and SEM has been done to confirm the formation, stability, crystalline nature, and morphology of the prepared sponges. The FTIR spectra confirmed the successful incorporation of NMIC in CH-NMIC-CD and CH-NMIC and the presence of β-CD in the (CH-NMIC-CD). It was found from the TGA results that the presence of β-CD makes the sponge CH-NMIC-CD stable. SEM analysis showed the morphology of the sponges found to be highly porous with interconnected macropores. The oil absorption capacity was 12.30 g_oil/g_ns higher for the sponge CH-NMIC-CD followed by CH-NMIC and CH. The sponges showed reusability excellently even after consecutive sorption-desorption separation cycles for five times. Moreover, the sponges were completely biodegraded within 25 days. The finding holds a promising future to use CH-NMIC-CD sponges in pollutant entrapment particularly in the removal of crude oil and allied area.

Preparation and characterization of modified rice husks by biological delignification and acetylation for oil spill cleanup

Cellulose is widely used as an effective sorbent to treat wastewater. Cellulosic sorbents have the advantage of biodegradability, as they are natural plant-based materials, compared with the synthetic materials such as polypropylene (PP) or polyurethane (PU). Among the raw biomass materials used for cellulose production, rice husk is one of the most cost competitive and widely available. In this work, biological treatments are compared to find the most effective treatment method for cellulose fibre production from rice husk. Using biological delignification, cellulose was extracted from raw rice husk and acetylated to acquire hydrophobicity. Delignification was performed using both bacteria and fungi and their results were compared. The white-rot fungi strain using 'Aspergillus flavus CICC 40258' was found to be the most effective treatment method, achieving a modified product with up to 55% w/w cellulose concentration. Acetylation further facilitated the sorption process and the maximum oil uptake capacity using delignification and acetylation treatment was found to be 20 g/g. The as-prepared sorbents exhibited high oil uptake rates and saturation capacity was reached after 5 min of contact with oil. The kinetic study presents a good correlation with the pseudo-second order model. The isothermal studies demonstrated that the oil sorption capacity of rice husk follows the Langmuir model as compared with the Freundlich model.

Comprehensive NMR Analysis of Pore Structures in Superabsorbing Cellulose Nanofiber Aerogels

Highly porous cellulose nanofiber (CNF) aerogels are promising, environmentally friendly, reusable, and low-cost materials for several advanced environmental, biomedical, and electronic applications. The aerogels have a complex and hierarchical 3D porous network structure with pore sizes ranging from nanometers to hundreds of micrometers. The morphology of the network has a critical role on the performance of aerogels, but it is difficult to characterize thoroughly with traditional techniques. Here, we introduce a combination of nuclear magnetic resonance (NMR) spectroscopy techniques for comprehensive characterization of pore sizes and connectivity in the CNF aerogels. Cyclohexane absorbed in the aerogels was used as a probe fluid. NMR cryoporometry enabled us to characterize the size distribution of nanometer scale pores in between the cellulose nanofibers in the solid matrix of the aerogels. Restricted diffusion of cyclohexane revealed the size distribution of the dominant micrometer scale pores as well as the tortuosity of the pore network. T ₂ relaxation filtered microscopic magnetic resonance imaging (MRI) method allowed us to determine the size distribution of the largest, submillimeter scale pores. The NMR techniques are nondestructive, and they provide information about the whole sample volume (not only surfaces). Furthermore, they show how absorbed liquids experience the complex 3D pore structure. Thorough characterization of porous structures is important for understanding the properties of the aerogels and optimizing them for various applications. The introduced comprehensive NMR analysis set is widely usable for a broad range of different kinds of aerogels used in different applications, such as catalysis, batteries, supercapacitors, hydrogen storage, etc.

Oil sorption and retention capacities of thermally-bonded hybrid nonwovens prepared from cotton, kapok, milkweed and polypropylene fibers

This work reports on a series of thermally-bonded, hybrid and oil-sorbent nonwovens developed from binary and tertiary mixing of cotton, kapok, and three varieties of milkweed fibers (Asclepias Syriaca, Calotropis Procera and Calotropis Gigantea) and polypropylene fibers. The physical and chemical properties of the fibers were investigated to examine their oleophilic character. It was observed that all the fiber surfaces were covered with natural wax. Further, kapok and milkweed fibers were found to have less cell wall thickness and high void ratio. Oil sorption and retention characteristics of these fibers were studied in loose fibrous form as well as in structured assembly form (thermally-bonded nonwovens) using high density oil and diesel oil. The effects of fiber diameter, fiber cross-sectional shape, fiber surface area and porosity on the oil sorption behavior were discussed. An excellent and a selective oil sorption behavior of milkweed fibers (Calotropis Procera and Calotropis Gigantea) blended with cotton and polypropylene fibers were observed. The maximum oil sorption capacity of the developed thermal bonded nonwoven was 40.16 g/g for high density (HD) oil and 23.00 g/g for diesel oil. Further, a high porosity combined with high surface area played a major role in deciding the oil sorption and retention characteristics.

Organogelator-Cellulose Composite for Practical and Eco-Friendly Marine Oil-Spill Recovery

Marine oil spills pose serious threats to the ecosystem and economy. There is much interest in developing sorbents that can tackle such spills. We have developed a novel sorbent by impregnating cellulose pulp with a sugar-derived oleogelator, 1,2:5,6-di-O-cyclohexylidene-mannitol. The gelator molecules mask the surface-exposed hydroxyl groups of cellulose fibrils by engaging them in H-bonding and expose their hydrophobic parts making the fibers temporarily hydrophobic (water contact angle 110°). This sorbent absorbs oil effectively, selectively and instantly from oil-water mixtures due to its hydrophobicity. Then the gelator molecules get released uniformly in the oil and later self-assemble to fibers, as evident from SEM analysis, congealing the oil within the matrix. This hierarchical entrapment of the oil by non-covalent polymeric fibers within a covalent polymer matrix makes the gel very strong (230-fold increase in the yield stress) and rigid, making it suitable for practical use.

Removal of dissolved toluene in underground water with nanowires of manganese oxide

The objective of the present study was to investigate the adsorption behavior of manganese oxide nanowires as an adsorbent for the removal of dissolved toluene from underground water. The nanowire membrane, composed of three-dimensional porous nanostructures plus superhydrophobic character, is very suitable for removal of the hydrophobic molecules. The effects of adsorbent dose, contact time, initial solution concentration, pH, salinity, and recyclability on the uptake of toluene by the adsorbent in batch mode are examined. The adsorption data compared to the adsorption of two kinds of activated carbons show that manganese oxide nanowire is competitive to activated carbons. Furthermore, the equilibrium data are fitted to different types of adsorption isotherms. Freundlich isotherm model illustrated the best fit to the data. The results of this study suggest that nanowires of manganese oxides can be used as a low cost, highly efficient adsorbent for the removal of dissolved hydrocarbon from aqueous solution.

Cross-linked poly(tetrahydrofuran) as promising sorbent for organic solvent/oil spill

In this study, a series of different molecular weights of poly(tetrahydrofuran) (PTHF), which is one of the most important commercial polymers around the world, was condensed with tris[3-(trimethoxysilyl)propyl]isocyanurate (ICS) to generate a cross-linked 3-dimensional network in order to obtain organic solvent/oil sorbents having high swelling capacity. The prepared sorbents show high and fast swelling capacity in oils such as dichloromethane (DCM), tetrahydrofuran (THF), acetone, t-butyl methyl ether (MTBE), gasoline, euro diesel, and crude oil. The recovery of the absorbed oils from contaminated surfaces, especially from water, and the regeneration of the sorbents after several applications are effective. The characterization and thermal properties of the sorbents are identified by Fourier transform infrared spectroscopy (FTIR), solid-state (13)C and (29)Si cross-polarization magic angle spinning (CPMAS) nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and thermal gravimetric analyses (TGA), respectively. The new usage area of PTHF is emerged by the preparation of PTHF-based network structure with high oil absorption capacity and having excellent reusability as an oil absorbent for the removal of organic liquids from the spill site.

Fabrication of Hydrophilic and Hydrophobic Sites on Polypropylene Nonwoven for Oil Spill Cleanup: Two Dilemmas Affecting Oil Sorption

This article mainly deals with the following dilemmas, which affect oil sorption and sorbent preparation: (1) hydrophobization could facilitate oil sorption but has adverse impacts on emulsion sorption; (2) micropores of conventional oil sorbent do not exhibit effective emulsion sorption. To solve the above contradictions, hydrophilic and hydrophobic sites were fabricated onto polypropylene (PP) nonwoven through electron beam radiation and subsequent ring-opening reaction. Further, a similar structure without a hydrophilic site was constructed as comparison to verify the dilemmas. An oil sorption and emulsion adsorption experiment revealed that the PP nonwoven with specific hydrophilic and hydrophobic sites is more suitable for oil cleanup. The hydrophobic site preserved its hydrophobicity and sorption capacity, and the hydrophilic site on PP surface effectively increased the affinity between the hydrophilic interface of emulsion and sorbent. The overlapped and intertwined structures could provide spaces large enough to accommodate oil and emulsion. In addition, the oil and emulsion sorption behaviors were systematically analyzed. The PP nonwoven fabricated in this study may find practical application in the cleanup of oil spills and the removal of organic pollutants from water surfaces.

Hydrophobic poly(alkoxysilane) organogels as sorbent material for oil spill cleanup

In this study, reusable poly(alkoxysilane) organogels with high absorption capacities were synthesized by the condensation of a cyclo aliphatic glycol (UNOXOL™) and altering the chain length of the alkyltriethoxysilanes. The structural and thermal properties of cross-linked poly(alkoxysilane) polymers were determined by FTIR, solid-state (13)C and (29)Si CPMAS NMR and TGA. The oil absorbency of poly(alkoxysilane)s was determined through oil absorption tests, absorption and desorption kinetics. Results showed that the highest oil absorbency capacities were found to be 295% for hexane, 389% for euro diesel, 428% for crude oil, 652% for gasoline, 792% for benzene, 792% for toluene, 868% for tetrahydrofuran, and 1060% for dichloromethane for the poly(alkoxysilane) gels based on UNOXOL™ and dodecyltriethoxysilane. Owing to their hydrophobic structure, the poly(alkoxysilane) organogels can selectively absorb crude oil from water. The reusability of the absorbents was quantitatively investigated, demonstrating that absorbents can be used effectively at least nine times.

A facile and cost-effective method for separation of oil-water mixtures using polymer-coated iron oxide nanoparticles

Catastrophic oil spills and oil from waste waters such as bilge and fracking waters pose major environmental concerns. The limitations of existing cleanup techniques for benign oil remediation has inspired a recent scientific impetus to develop oil-absorbing smart nanomaterials. Magnetic nanocomposites were here designed to allow easy recovery from various systems. In this study, sorption of reference MC252 oil with easy-to-synthesize and low-cost hydrophilic polyvinylpyrrolidone-coated iron oxide nanoparticles is reported for the first time. The one-step modified polyol synthesis in air directly generates water-soluble nanoparticles. Stable polyvinylpyrrolidone-coatings are known to minimize environmental alterations of nanoparticles from aggregation and other processes. Iron oxide provides effective magnetic actuation, while both PVP and iron oxide have low toxicity. These nanoparticles gave quantitative (near 100%) oil removal under optimized conditions. The facile synthesis and ease of use represents a significant improvement over existing techniques.

Nano-based systems for oil spills control and cleanup

This paper reports the development of superhydrophobic nanocomposite systems which are also oleophilic. As hydrophobicity is based on low energy surface and surface roughness, the electrospinning technique was selected as the manufacturing technique. N,N' dimethylformamide (DMF) was employed as the polystyrene (PS) solvent. The "Tea-bag" (T-B) nanocomposite system is based on exfoliated graphite surrounded by PS superhydrophobic membranes. The T-B systems were tested regarding its adsorption and absorption rates. To test these properties, it was employed three different water/oil emulsions, i.e., new and used motor oil, which have physical properties (viscosity and specific gravity) similar to heavy crude oil extracted in Brazil, and vacuum pump oil (which does not form oil/water emulsion). It was observed that oil adsorption rate is dependent on oil surface tension, while the absorption rate is mainly dependent on membrane/exfoliated graphite surface area. Experimental data show that oil absorption rates ranged between 2.5g/g and 40g/g, while the adsorption rate oscillated from 0.32g/g/min to 0.80g/g/min. Furthermore, T-B systems were tested as containment barriers and sorbent materials with good results including its recyclability.

Molecular dynamics simulations of the adhesion of a thin annealed film of oleic acid onto crystalline cellulose

Molecular dynamics simulations were used to characterize the wetting behavior of crystalline cellulose planes in contact with a thin oily film of oleic acid. Cellulose crystal planes with higher molecular protrusions and increased surface area produced stronger adhesion if compared to other crystal planes due to enhanced wetting and hydrogen bonding. The detailed characteristics of crystal plane features and the contribution of directional hydrogen bonding was investigated. Similarly, oleophilicity of the cellulose planes increased with the increase in surface roughness and number of directional hydrogen bonds. These results correlate with conclusions drawn from experimental studies such as adhesion of an ink vehicle on cellulose surface.