Much Enhanced Catalytic Reactivity of Cobalt Chlorin Derivatives on Two-Electron Reduction of Dioxygen to Produce Hydrogen Peroxide

Selective two-electron and four-electron oxygen reduction reactions using Co-based electrocatalysts

The oxygen reduction reaction (ORR) can take place via both four-electron (4e-) and two-electron (2e-) pathways. The 4e- ORR, which produces water (H2O) as the only product, is the key reaction at the cathode of fuel cells and metal-air batteries. On the other hand, the 2e- ORR can be used to electrocatalytically synthesize hydrogen peroxide (H2O2). For the practical applications of the ORR, it is very important to precisely control the selectivity. Understanding structural effects on the ORR provides the basis to control the selectivity. Co-based electrocatalysts have been extensively studied for the ORR due to their high activity, low cost, and relative ease of synthesis. More importantly, by appropriately designing their structures, Co-based electrocatalysts can become highly selective for either the 2e- or the 4e- ORR. Therefore, Co-based electrocatalysts are ideal models for studying fundamental structure-selectivity relationships of the ORR. This review starts by introducing the reaction mechanism and selectivity evaluation of the ORR. Next, Co-based electrocatalysts, especially Co porphyrins, used for the ORR with both 2e- and 4e- selectivity are summarized and discussed, which leads to the conclusion of several key structural factors for ORR selectivity regulation. On the basis of this understanding, future works on the use of Co-based electrocatalysts for the ORR are suggested. This review is valuable for the rational design of molecular catalysts and material catalysts with high selectivity for 4e- and 2e- ORRs. The structural regulation of Co-based electrocatalysts also provides insights into the design and development of ORR electrocatalysts based on other metal elements.

Efficient H2O2 Synthesis Through a Two-Electron Oxygen Reduction Reaction by Electrocatalysts

The two-electron oxygen reduction reaction (2e-ORR) for the sustainable synthesis of hydrogen peroxide (H2O2) has demonstrated considerable potential for local production of this environmentally friendly chemical oxidant on small, medium, and large scales. This method offers a promising alternative to the energy-intensive anthraquinone approach, placing a primary emphasis on the development of efficient electrocatalysts. Improving the efficiency of electrocatalysts and uncovering their catalytic mechanisms are essential steps in achieving high 2e-ORR activity, selectivity, and stability. This comprehensive review summarizes recent advancements in electrocatalysts for in-situ H2O2 production, providing a detailed overview of the field. In particular, the review delves into the design, fabrication, and investigation of catalytic active sites contributing to H2O2 selectivity. Additionally, it highlights a range of electrocatalysts including pure metals and alloys, transition metal compounds, single-atom catalysts, and carbon-based catalysts for the 2e-ORR pathway. Finally, the review addresses significant challenges and opportunities for efficient H2O2 electrosynthesis, as well as potential future research directions.

Co-based Catalysts for Selective H2 O2 Electroproduction via 2-electron Oxygen Reduction Reaction

Electrochemical production of hydrogen peroxide (H₂ O₂ ) via two-electron oxygen reduction reaction (ORR) process is emerging as a promising alternative method to the conventional anthraquinone process. To realize high-efficiency H₂ O₂ electrosynthesis, robust and low cost electrocatalysts have been intensively pursued, among which Co-based catalysts attract particular research interests due to the earth-abundance and high selectivity. Here, we provide a comprehensive review on the advancement of Co-based electrocatalyst for H₂ O₂ electroproduction. The fundamental chemistry of 2-electron ORR is discussed firstly for guiding the rational design of electrocatalysts. Subsequently, the development of Co-based electrocatalysts involving nanoparticles, compounds and single atom catalysts is summarized with the focus on active site identification, structure regulation and mechanism understanding. Moreover, the current challenges and future directions of the Co-based electrocatalysts are briefly summarized in this review.

Crucial Roles of a Pendant Imidazole Ligand of a Cobalt Porphyrin Complex in the Stoichiometric and Catalytic Reduction of Dioxygen

A cobalt porphyrin complex with a pendant imidazole base ([(L₁ )Co^II ]) is an efficient catalyst for the homogeneous catalytic two-electron reduction of dioxygen by 1,1'-dimethylferrocene (Me₂ Fc) in the presence of triflic acid (HOTf), as compared with a cobalt porphyrin complex without a pendant imidazole base ([(L₂ )Co^II ]). The pendant imidazole ligand plays a crucial role not only to provide an imidazolinium proton for proton-coupled electron transfer (PCET) from [(L₁ )Co^II ] to O₂ in the presence of HOTf but also to facilitate electron transfer (ET) from [(L₁ )Co^II ] to O₂ in the absence of HOTf. The kinetics analysis and the detection of intermediates in the stoichiometric and catalytic reduction of O₂ have provided clues to clarify the crucial roles of the pendant imidazole ligand of [(L₁ )Co^II ] for the first time.

Protonated g-C3N4 coated Co9S8 heterojunction for photocatalytic H2O2 production

Photocatalytic H₂O₂ production is an eco-friendly technique because only H₂O, molecular O₂ and light are involved. However, it still confronts the challenges of the unsatisfactory productivity of H₂O₂ and the dependence on organic electron donors or high purity O₂, which restrict the practical application. Herein, we construct a type-II heterojunction of the protonated g-C₃N₄ coated Co₉S₈ semiconductor for photocatalytic H₂O₂ production. The ultrathin g-C₃N₄ uniformly spreads on the surface of the dispersed Co₉S₈ nanosheets by a two-step method of protonation and dip-coating, and exhibits improved photogenerated electrons transportability and e^--h⁺ pairs separation ability. The photocatalytic system can achieve a considerable productivity of H₂O₂ to 2.17 mM for 5 h in alkaline medium in the absence of the organic electron donors and pure O₂. The optimal photocatalyst also obtains the highest apparent quantum yield (AQY) of 18.10% under 450 nm of light irradiation, as well as a good reusability. The contribution of the type-II heterojunction is that the migrations of electrons and holes within the interface between g-C₃N₄ and Co₉S₈ matrix promote the separation of photocarriers, and another channel is also opened for H₂O₂ generation. The accumulated electrons in conduction band (CB) of Co₉S₈ contribute to the major channel of two-electron reduction of O₂ for H₂O₂ production. Meanwhile, the electrons in CB of g-C₃N₄ participate in the single electron reduction of O₂ as an auxiliary channel to enhance the H₂O₂ production.

Pendent Relay Enhances H2O2 Selectivity during Dioxygen Reduction Mediated by Bipyridine-Based Co-N2O2 Complexes

Generally, cobalt-N₂O₂ complexes show selectivity for hydrogen peroxide during electrochemical dioxygen (O₂) reduction. We recently reported a Co(III)-N₂O₂ complex with a 2,2'-bipyridine-based ligand backbone which showed alternative selectivity: H₂O was observed as the primary reduction product from O₂ (71 ± 5%) with decamethylferrocene as a chemical reductant and acetic acid as a proton donor in methanol solution. We hypothesized that the key selectivity difference in this case arises in part from increased favorability of protonation at the distal O position of the key intermediate Co(III)-hydroperoxide species. To interrogate this hypothesis, we have prepared a new Co(III) compound that contains pendent -OMe groups poised to direct protonation toward the proximal O atom of this hydroperoxo intermediate. Mechanistic studies in acetonitrile (MeCN) solution reveal two regimes are possible in the catalytic response, dependent on added acid strength and the presence of the pendent proton donor relay. In the presence of stronger acids, the activity of the complex containing pendent relays becomes O₂ dependent, implying a shift to Co(III)-superoxide protonation as the rate-determining step. Interestingly, the inclusion of the relay results in primarily H₂O₂ production in MeCN, despite minimal difference between the standard reduction potentials of the three complexes tested. EPR spectroscopic studies indicate the formation of Co(III)-superoxide species in the presence of exogenous base, with greater O₂ reactivity observed in the presence of the pendent -OMe groups.

The Solvent Effect on H2 O2 Generation at Room Temperature Ionic Liquid|Water Interface

H₂ O₂ is a versatile chemical and can be generated by the oxygen reduction reaction (ORR) in proton donor solution in molecular solvents or room temperature ionic liquids (IL). We investigated this reaction at interfaces formed by eleven hydrophobic ILs and acidic aqueous solution as a proton source with decamethylferrocene (DMFc) as an electron donor. H₂ O₂ is generated in colorimetrically detectable amounts in biphasic systems formed by alkyl imidazolium hexafluorophosphate or tetraalkylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. H₂ O₂ fluxes were estimated close to liquid|liquid interface by scanning electrochemical microscopy (SECM). Contrary to the interfaces formed by hydrophobic electrolyte solution in a molecular solvent, H₂ O₂ generation is followed by cation expulsion to the aqueous phase. Weak correlation between the H₂ O₂ flux and the difference between DMFc/DMFc⁺ redox potential and 2 electron ORR standard potential indicates kinetic control of the reaction.

Activation of Molecular Oxygen by a Cobalt(II) Tetra-NHC Complex*

The first dicobalt(III) μ2 -peroxo N-heterocyclic carbene (NHC) complex is reported. It can be quantitatively generated from a cobalt(II) compound bearing a 16-membered macrocyclic tetra-NHC ligand via facile activation of dioxygen from air at ambient conditions. The reaction proceeds via an end-on superoxo intermediate as demonstrated by EPR studies and DFT. The peroxo moiety can be cleaved upon addition of acetic acid, yielding the corresponding CoIII acetate complex going along with H2 O2 formation. In contrast, both CoII and CoIII complexes are also studied as catalysts to utilize air for olefin and alkane oxidation reactions; however, not resulting in product formation. The observations are rationalized by DFT-calculations, suggesting a nucleophilic nature of the dicobalt(III) μ2 -peroxo complex. All isolated compounds are characterized by NMR, ESI-MS, elemental analysis, EPR and SC-XRD.

Reduction of dioxygen to water by a Co(N2O2) complex with a 2,2'-bipyridine backbone

We report a Co-based complex for the reduction of O₂ to H₂O utilizing decamethylferrocene as chemical reductant and acetic acid as a proton donor in methanol solution. Despite structural similarities to previously reported Co(N₂O₂) complexes capable of catalytic O₂ reduction, this system shows selectivity for the four-electron/four-proton reduction product, H₂O, instead of the two-electron/two-proton reduction product, H₂O₂. Mechanistic studies show that the overall rate law is analogous to previous examples, suggesting that the key selectivity difference arises in part from increased favorability of protonation at the distal O position of the key intermediate Co(iii)-hydroperoxide, instead of the proximal one. Interestingly, no product selectivity dependence is observed with respect to the presence of pyridine, which is proposed to bind trans to O₂ during catalysis.

Synthesis of Hangman Chlorins

Two complementary rational synthetic routes have been developed in order to synthesize hangman chlorins, which differ with regard to the order of the installation (pre- and post-formation of the chlorin macrocycle) and position of the xanthene backbone about the chlorin periphery. The versatility of the synthetic method is demonstrated with the preparation of ten new hangman chlorins bearing a xanthene backbone and a pendant carboxylic acid. Cyclic voltammograms of hangman chlorins exhibit a hangman effect derived from intermolecular proton transfer. This hangman effect is manifested in catalytic hydrogen evolution production.

Investigation of the demetallation of 10-aryl substituted synthetic chlorins under acidic conditions

The acidic demetallation of a series of sparsely substituted Zn(II) chlorins is reported. The chlorins were functionalized in the 10-position with substituents ranging from strongly electron donating mesityl and p-methoxyphenyl to electron-withdrawing p-nitrophenyl and pentafluorophenyl groups. The demetallation kinetics were investigated using UV-Visible absorption spectroscopy. Demetallation was carried out by exposing the metallochlorins dissolved in CH₂Cl₂ to an excess of trifluoroacetic acid. Reasonable correlation was found between the Hammett constant of the 10-substituent and the rate constant of the loss of the metal ion. The largest differences were observed between the p-methoxyphenyl and p-nitrophenyl-substituted Zn(II) chlorins, undergoing loss of Zn(II) with pseudo first order rate constants of 0.0789 × 10^-3 and 3.70 × 10^-3 min^-1, respectively. Taken together, these data establish the dramatic influence even subtle changes can have in altering the electronic properties of chlorins, which in turn impacts metallochlorin function.

Metal–organic framework-based nanomaterials for photocatalytic hydrogen peroxide production

Metal–organic frameworks act as efficient photocatalysts for visible-light driven hydrogen peroxide production in a single-phase system and two-phase system.

Brønsted Acid Scaling Relationships Enable Control Over Product Selectivity from O2 Reduction with a Mononuclear Cobalt Porphyrin Catalyst

The selective reduction of O₂, typically with the goal of forming H₂O, represents a long-standing challenge in the field of catalysis. Macrocyclic transition-metal complexes, and cobalt porphyrins in particular, have been the focus of extensive study as catalysts for this reaction. Here, we show that the mononuclear Co-tetraarylporphyrin complex, Co(por^OMe) (por^OMe = meso-tetra(4-methoxyphenyl)porphyrin), catalyzes either 2e^-/2H⁺ or 4e^-/4H⁺ reduction of O₂ with high selectivity simply by changing the identity of the Brønsted acid in dimethylformamide (DMF). The thermodynamic potentials for O₂ reduction to H₂O₂ or H₂O in DMF are determined and exhibit a Nernstian dependence on the acid pK _a, while the Co^III/II redox potential is independent of the acid pK _a. The reaction product, H₂O or H₂O₂, is defined by the relationship between the thermodynamic potential for O₂ reduction to H₂O₂ and the Co^III/II redox potential: selective H₂O₂ formation is observed when the Co^III/II potential is below the O₂/H₂O₂ potential, while H₂O formation is observed when the Co^III/II potential is above the O₂/H₂O₂ potential. Mechanistic studies reveal that the reactions generating H₂O₂ and H₂O exhibit different rate laws and catalyst resting states, and these differences are manifested as different slopes in linear free energy correlations between the log(rate) versus pK _a and log(rate) versus effective overpotential for the reactions. This work shows how scaling relationships may be used to control product selectivity, and it provides a mechanistic basis for the pursuit of molecular catalysts that achieve low overpotential reduction of O₂ to H₂O.

Structure and reactivity of the first-row d-block metal-superoxo complexes

This review discusses the structure and reactivity of metal-superoxo complexes covering all ten first-row d-block metals from Sc to Zn.

Oxygen Reduction by Homogeneous Molecular Catalysts and Electrocatalysts

The oxygen reduction reaction (ORR) is a key component of biological processes and energy technologies. This Review provides a comprehensive report of soluble molecular catalysts and electrocatalysts for the ORR. The precise synthetic control and relative ease of mechanistic study for homogeneous molecular catalysts, as compared to heterogeneous materials or surface-adsorbed species, enables a detailed understanding of the individual steps of ORR catalysis. Thus, the Review places particular emphasis on ORR mechanism and thermodynamics. First, the thermochemistry of oxygen reduction and the factors influencing ORR efficiency are described to contextualize the discussion of catalytic studies that follows. Reports of ORR catalysis are presented in terms of their mechanism, with separate sections for catalysis proceeding via initial outer- and inner-sphere electron transfer to O₂. The rates and selectivities (for production of H₂O₂ vs H₂O) of these catalysts are provided, along with suggested methods for accurately comparing catalysts of different metals and ligand scaffolds that were examined under different experimental conditions.

Fuel Production from Seawater and Fuel Cells Using Seawater

Seawater is the most abundant resource on our planet and fuel production from seawater has the notable advantage that it would not compete with growing demands for pure water. This Review focuses on the production of fuels from seawater and their direct use in fuel cells. Electrolysis of seawater under appropriate conditions affords hydrogen and dioxygen with 100 % faradaic efficiency without oxidation of chloride. Photoelectrocatalytic production of hydrogen from seawater provides a promising way to produce hydrogen with low cost and high efficiency. Microbial solar cells (MSCs) that use biofilms produced in seawater can generate electricity from sunlight without additional fuel because the products of photosynthesis can be utilized as electrode reactants, whereas the electrode products can be utilized as photosynthetic reactants. Another important source for hydrogen is hydrogen sulfide, which is abundantly found in Black Sea deep water. Hydrogen produced by electrolysis of Black Sea deep water can also be used in hydrogen fuel cells. Production of a fuel and its direct use in a fuel cell has been made possible for the first time by a combination of photocatalytic production of hydrogen peroxide from seawater and dioxygen in the air and its direct use in one-compartment hydrogen peroxide fuel cells to obtain electric power.

Catalytic reduction of proton, oxygen and carbon dioxide with cobalt macrocyclic complexes

The conversion of solar energy into chemical energy by the reduction of small molecules provides a promising solution for the effective energy storage and transport. In this manuscript, we have highlighted our recent researches on the catalysis of cobalt-macrocycle complexes for the reduction of O2, proton and CO2. We have successfully clarified the reaction mechanisms of catalytic O2 reduction with cobalt phthalocyanine (Co[Formula: see text](Pc)) and cobalt chlorin (Co[Formula: see text](Ch)) based on detailed kinetic study under homogeneous conditions. The presence of proton-accepting moieties on these macrocyclic ligands enhances the electron-accepting ability, leading to the efficient catalytic two-electron reduction of O2 to produce hydrogen peroxide (H2O[Formula: see text] with high stability and less overpotential in acidic solutions. When Co[Formula: see text](Ch) is adsorbed on multi-walled carbon nanotubes (MWCNTs) and employed as an electrocatalyst, CO2 was successfully reduced to form CO with a Faradaic efficiency of 89% at an applied potential of -1.1 V vs. NHE in an aqueous solution. Finally, photocatalytic H2 evolution was attained from ascorbic acid with Co[Formula: see text](Ch) as a catalyst and [Ru(bpy)3][Formula: see text] (bpy [Formula: see text] 2,2[Formula: see text]-bipyridine) as a photocatalyst via a one-photon two-electron process.

Catalytic two-electron reduction of dioxygen by ferrocene derivatives with manganese(V) corroles

Electron transfer from octamethylferrocene (Me8Fc) to the manganese(V) imidocorrole complex (tpfc)Mn(V)(NAr) [tpfc = 5,10,15-tris(pentafluorophenyl)corrole; Ar = 2,6-Cl2C6H3] proceeds efficiently to give an octamethylferrocenium ion (Me8Fc(+)) and [(tpfc)Mn(IV)(NAr)](-) in acetonitrile (MeCN) at 298 K. Upon the addition of trifluoroacetic acid (TFA), further reduction of [(tpfc)Mn(IV)(NAr)](-) by Me8Fc gives (tpfc)Mn(III) and ArNH2 in deaerated MeCN. TFA also results in hydrolysis of (tpfc)Mn(V)(NAr) with residual water to produce a protonated manganese(V) oxocorrole complex ([(tpfc)Mn(V)(OH)](+)) in deaerated MeCN. [(tpfc)Mn(V)(OH)](+) is rapidly reduced by 2 equiv of Me8Fc in the presence of TFA to give (tpfc)Mn(III) in deaerated MeCN. In the presence of dioxygen (O2), (tpfc)Mn(III) catalyzes the two-electron reduction of O2 by Me8Fc with TFA in MeCN to produce H2O2 and Me8Fc(+). The rate of formation of Me8Fc(+) in the catalytic reduction of O2 follows zeroth-order kinetics with respect to the concentrations of Me8Fc and TFA, whereas the rate increases linearly with increasing concentrations of (tpfc)Mn(V)(NAr) and O2. These kinetic dependencies are consistent with the rate-determining step being electron transfer from (tpfc)Mn(III) to O2, followed by further proton-coupled electron transfer from Me8Fc to produce H2O2 and [(tpfc)Mn(IV)](+). Rapid electron transfer from Me8Fc to [(tpfc)Mn(IV)](+) regenerates (tpfc)Mn(III), completing the catalytic cycle. Thus, catalytic two-electron reduction of O2 by Me8Fc with (tpfc)Mn(V)(NAr) as a catalyst precursor proceeds via a Mn(III)/Mn(IV) redox cycle.

Tetraamino-zinc phthalocyanine covalently bound to benzoic acid-functionalized graphene composites for highly efficient visible light photocatalytic activities

Photodegradation of RhB over a composite of zinc phthalocyanine covalently bound to benzoic acid-functionalized graphene.