Amorphous Titania-Coated Magnetite Spherical Nanoparticles: Sonochemical Synthesis and Catalytic Degradation of Nonylphenol Ethoxylate

Critical review of natural iron-based minerals used as heterogeneous catalysts in peroxide activation processes: Characteristics, applications and mechanisms

Recently, an increasing number of works have been reported about iron-based materials applied as catalysts in peroxide activation processes to degrade pollutants in water. Iron-based catalysts include synthetic and natural iron-based materials. However, some synthetic iron-based materials are difficult to scale up in the practical applications due to high cost and serious secondary environmental pollution. In contrast, natural iron-based minerals are more available and cheaper, and also hold a great promise in peroxide activation processes for pollutant degradation. In this review, we classify different natural iron-based materials into two categories: iron oxide minerals (e.g., magnetite, hematite, and goethite,), and iron sulfide minerals (e.g., pyrite and pyrrhotite,). Their overview applications in peroxide activation processes for pollutant degradation in wastewaters are systematically summarized for the first time. Moreover, the peroxide activation mechanisms induced by natural minerals, and the influences of reaction conditions in different systems are discussed. Finally, the application prospects and existing drawbacks of natural iron-based minerals in the peroxide activation processes for wastewater treatment are proposed. We believe this review can shed light on the application of natural iron-based minerals in peroxide activation processes and present better perspectives for future researches.

Degradation of 4-nonylphenol in marine sediments by persulfate over magnetically modified biochars

In this study, an environmentally friendly and economically viable bamboo biochar (BB) was modified by Fe₃O₄ and was applied for the treatment of real river sediments containing the endocrine disruptor chemical (EDC) 4-nonylphenol (4-NP). The microporosity of Fe₃O₄-BB was clearly observed from the N₂ adsorption isotherms. The catalytic performance of Fe₃O₄-BB is highly dependent on pH and the catalyst dosage. The degradation efficiency of 4-NP (85%) was achieved at pH 3.0 using an initial dosage of 3.33 g L^-1 Fe₃O₄-BB and 2.3 × 10^-5 M persulfate (PS) in a biochar-sediment system. The kinetic behavior of 4-NP degradation with catalysis can be accounted by using the Langmuir-Hinshelwood type kinetic model. The MTT assay results indicated that Fe₃O₄-BB has a low potent cytotoxic effect and is therefore suitable for application in remediation of contaminated sediment.

Enhancement of TiO₂ NPs Activity by Fe₃O₄ Nano-Seeds for Removal of Organic Pollutants in Water

The enhancement of the photocatalytic activity of TiO₂ nanoparticles (NPs), synthesized in the presence of a very small amount of magnetite (Fe₃O₄) nanoparticles, is here presented and discussed. From X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analyses, the crystallinity of TiO₂ nanoparticles (NPs) seems to be affected by Fe₃O₄, acting as nano-seeds to improve the tetragonal TiO₂ anatase structure with respect to the amorphous one. Photocatalytic activity data, i.e., the degradation of methylene blue and the Ofloxacin fluoroquinolone emerging pollutant, give evidence that the increased crystalline structure of the NPs, even if correlated to a reduced surface to mass ratio (with respect to commercial TiO₂ NPs), enhances the performance of this type of catalyst. The achievement of a relatively well-defined crystal structure at low temperatures (T_max = 150 °C), preventing the sintering of the TiO₂ NPs and, thus, preserving the high density of active sites, seems to be the keystone to understand the obtained results.

Fabrication of a reusable magnetic multi-walled carbon nanotube–TiO2 nanocomposite by electrostatic adsorption: enhanced photodegradation of malachite green

A simple, quick and efficient method for the fabrication of a magnetic multi-walled carbon nanotube–TiO₂ (MMWCNT–TiO₂) nanocomposite through electrostatic attraction was proposed as a novel method.