Hydroxylation by the hydroperoxy-iron species in cytochrome P450 enzymes

Approaches to determination of the mechanism of the Rieske monooxygenase salicylate 5-hydroxylase

Rieske oxygenases catalyze an exceptionally broad range of discrete types of reactions despite the utilization of a highly conserved quaternary structure and metal cofactor complement. Oxygen activation within this family occurs at a mononuclear FeII site, which is located approximately 12 Å from a one-electron reduced Rieske-type iron-sulfur cluster. Electron transfer from the Rieske cluster to the mononuclear iron site occurs during O2 activation and product formation. A key question is whether all Rieske oxygenase reactions involve the same type of activated oxygen species. This question has been explored using the Rieske oxygenase salicylate 5-hydroxylase, which catalyzes both aromatic hydroxylation of salicylate and aromatic methyl hydroxylation when a methyl substituent is placed in the normal position of aromatic ring hydroxylation. We show here that the combined application of kinetic, biophysical, computational, and isotope effect methods reveals a uniform mechanism for initial O2 activation and substrate attack for both types of reactivity. However, the mechanism diverges during the later phases of the reactions in response to the electronic nature and geometry of the substrates as well as the lifetime of intermediates. Similar factors may be encountered broadly in the Rieske oxygenase family.

Use of Singlet Oxygen in the Generation of a Mononuclear Nonheme Iron(IV)-Oxo Complex

Nonheme iron(III)-superoxo intermediates are generated in the activation of dioxygen (O₂) by nonheme iron(II) complexes and then converted to iron(IV)-oxo species by reacting with hydrogen donor substrates with relatively weak C-H bonds. If singlet oxygen (¹O₂) with ca. 1 eV higher energy than the ground state triplet oxygen (³O₂) is employed, iron(IV)-oxo complexes can be synthesized using hydrogen donor substrates with much stronger C-H bonds. However, ¹O₂ has never been used in generating iron(IV)-oxo complexes. Herein, we report that a nonheme iron(IV)-oxo species, [Fe^IV(O)(TMC)]²⁺ (TMC = tetramethylcyclam), is generated using ¹O₂, which is produced with boron subphthalocyanine chloride (SubPc) as a photosensitizer, and hydrogen donor substrates with relatively strong C-H bonds, such as toluene (BDE = 89.5 kcal mol^-1), via electron transfer from [Fe^II(TMC)]²⁺ to ¹O₂, which is energetically more favorable by 0.98 eV, as compared with electron transfer from [Fe^II(TMC)]²⁺ to ³O₂. Electron transfer from [Fe^II(TMC)]²⁺ to ¹O₂ produces an iron(III)-superoxo complex, [Fe^III(O₂)(TMC)]²⁺, followed by abstracting a hydrogen atom from toluene by [Fe^III(O₂)(TMC)]²⁺ to form an iron(III)-hydroperoxo complex, [Fe^III(OOH)(TMC)]²⁺, that is further converted to the [Fe^IV(O)(TMC)]²⁺ species. Thus, the present study reports the first example of generating a mononuclear nonheme iron(IV)-oxo complex with the use of singlet oxygen, instead of triplet oxygen, and a hydrogen atom donor with relatively strong C-H bonds. Detailed mechanistic aspects, such as the detection of ¹O₂ emission, the quenching by [Fe^II(TMC)]²⁺, and the quantum yields, have also been discussed to provide valuable mechanistic insights into understanding nonheme iron-oxo chemistry.

Investigating the Active Oxidants Involved in Cytochrome P450 Catalyzed Sulfoxidation Reactions

Cytochrome P450 (CYP) heme-thiolate monooxygenases catalyze the hydroxylation of the C-H bonds of organic molecules. This reaction is initiated by a ferryl-oxo heme radical cation (Cpd I). These enzymes can also catalyze sulfoxidation reactions and the ferric-hydroperoxy complex (Cpd 0) and the Fe(III)-H₂ O₂ complex have been proposed as alternative oxidants for this transformation. To investigate this, the oxidation of 4-alkylthiobenzoic acids and 4-methoxybenzoic acid by the CYP199A4 enzyme from Rhodopseudomonas palustris HaA2 was compared using both monooxygenase and peroxygenase pathways. By examining mutants at the mechanistically important, conserved acid alcohol-pair (D251N, T252A and T252E) the relative amounts of the reactive intermediates that would form in these reactions were disturbed. Substrate binding and X-ray crystal structures helped to understand changes in the activity and enabled an attempt to evaluate whether multiple oxidants can participate in these reactions. In peroxygenase reactions the T252E mutant had higher activity towards sulfoxidation than O-demethylation but in the monooxygenase reactions with the WT enzyme the activity of both reactions was similar. The peroxygenase activity of the T252A mutant was greater for sulfoxidation reactions than the WT enzyme, which is the reverse of the activity changes observed for O-demethylation. The monooxygenase activity and coupling efficiency of sulfoxidation and oxidative demethylation were reduced by similar degrees with the T252A mutant. These observations infer that while Cpd I is required for O-dealkylation, another oxidant may contribute to sulfoxidation. Based on the activity of the CYP199A4 mutants it is proposed that this is the Fe(III)-H₂ O₂ complex which would be more abundant in the peroxide-driven reactions.

A Dinickel Catalyzed Cyclopropanation without the Formation of a Metal Carbene Intermediate

(NDI)Ni2 catalysts (NDI=naphthyridine-diimine) promote cyclopropanation reactions of 1,3-dienes using (Me3 Si)CHN2 . Mechanistic studies reveal that a metal carbene intermediate is not part of the catalytic cycle. The (NDI)Ni2 (CHSiMe3 ) complex was independently synthesized and found to be unreactive toward dienes. Based on DFT models, we propose an alternative mechanism that begins with a Ni2 -mediated coupling of (Me3 Si)CHN2 and the diene. N2 extrusion followed by radical C-C bond formation generates the cyclopropane product. This model reproduces the experimentally observed regioselectivity and diastereoselectivity of the reaction.

Continued Progress towards Efficient Functionalization of Natural and Non-natural Targets under Mild Conditions: Oxygenation by C-H Bond Activation with Dioxirane

The successful isolation and characterization of a dioxirane species in 1988 opened up one of the most attractive methods for the efficient oxidation of simple and/or structurally complex molecules. Dioxirane today rank among the most powerful tools in organic chemistry, with numerous applications in commercially important processes. They were quickly recognized as efficient oxygen transfer agents, especially for epoxidations and for a wide range of O-insertion reactions into C-H bonds. Dioxirane possess catalytic activity and appear as highly (chemo-, regio-, and stereo-) selective oxidants, despite their reactivity under mild and strictly neutral conditions being controlled by a combination of steric and electronic factors. In this review, we discuss some of the most recent and significant developments in the selective homogeneous and heterogeneous oxyfunctionalization of non-activated C-H bonds in hydrocarbons of natural and non-natural targets by using isolated dioxirane or, more generally, by using the ketones (i.e., the dioxirane precursors) as organocatalysts.

One small step for cytochrome P450 in its catalytic cycle, one giant leap for enzymology

The intermediates operating in the cytochrome P450 catalytic cycle have been investigated for more than half a century, fascinating many enzymologists. Each intermediate has its unique role to carry out diverse oxidations. Natural time course of the catalytic cycle is quite fast, hence, not all of the reactive intermediates could be isolated during physiological catalysis. Different high-valent iron intermediates have been proposed as primary oxidants: the candidates are compound 0 (Cpd 0, [FeOOH][Formula: see text]P450) and compound I (Cpd I, Fe(IV)[Formula: see text]O por[Formula: see text]P450). Among them, the role of Cpd I in hydroxylation is fairly well understood due the discovery of the peroxide shunt. This review endeavors to put the outstanding research efforts conducted to isolate and characterize the intermediates together. In addition to spectral features of each intermediate in the catalytic cycle, the oxidizing powers of Cpd 0 and Cpd I will be discussed along with most recent scientific findings.

Heme and Nonheme High-Valent Iron and Manganese Oxo Cores in Biological and Abiological Oxidation Reactions

Utilization of O₂ as an abundant and environmentally benign oxidant is of great interest in the design of bioinspired synthetic catalytic oxidation systems. Metalloenzymes activate O₂ by employing earth-abundant metals and exhibit diverse reactivities in oxidation reactions, including epoxidation of olefins, functionalization of alkane C-H bonds, arene hydroxylation, and syn-dihydroxylation of arenes. Metal-oxo species are proposed as reactive intermediates in these reactions. A number of biomimetic metal-oxo complexes have been synthesized in recent years by activating O₂ or using artificial oxidants at iron and manganese centers supported on heme or nonheme-type ligand environments. Detailed reactivity studies together with spectroscopy and theory have helped us understand how the reactivities of these metal-oxygen intermediates are controlled by the electronic and steric properties of the metal centers. These studies have provided important insights into biological reactions, which have contributed to the design of biologically inspired oxidation catalysts containing earth-abundant metals like iron and manganese. In this Outlook article, we survey a few examples of these advances with particular emphasis in each case on the interplay of catalyst design and our understanding of metalloenzyme structure and function.

Oxygen Activation and Radical Transformations in Heme Proteins and Metalloporphyrins

As a result of the adaptation of life to an aerobic environment, nature has evolved a panoply of metalloproteins for oxidative metabolism and protection against reactive oxygen species. Despite the diverse structures and functions of these proteins, they share common mechanistic grounds. An open-shell transition metal like iron or copper is employed to interact with O2 and its derived intermediates such as hydrogen peroxide to afford a variety of metal-oxygen intermediates. These reactive intermediates, including metal-superoxo, -(hydro)peroxo, and high-valent metal-oxo species, are the basis for the various biological functions of O2-utilizing metalloproteins. Collectively, these processes are called oxygen activation. Much of our understanding of the reactivity of these reactive intermediates has come from the study of heme-containing proteins and related metalloporphyrin compounds. These studies not only have deepened our understanding of various functions of heme proteins, such as O2 storage and transport, degradation of reactive oxygen species, redox signaling, and biological oxygenation, etc., but also have driven the development of bioinorganic chemistry and biomimetic catalysis. In this review, we survey the range of O2 activation processes mediated by heme proteins and model compounds with a focus on recent progress in the characterization and reactivity of important iron-oxygen intermediates. Representative reactions initiated by these reactive intermediates as well as some context from prior decades will also be presented. We will discuss the fundamental mechanistic features of these transformations and delineate the underlying structural and electronic factors that contribute to the spectrum of reactivities that has been observed in nature as well as those that have been invented using these paradigms. Given the recent developments in biocatalysis for non-natural chemistries and the renaissance of radical chemistry in organic synthesis, we envision that new enzymatic and synthetic transformations will emerge based on the radical processes mediated by metalloproteins and their synthetic analogs.

Engineering P450LaMO stereospecificity and product selectivity for selective C–H oxidation of tetralin-like alkylbenzenes

Via Phe scanning based protein engineering, P450_LaMO increased enantioselectivity to er 98 : 2 and product selectivity, alcohol : ketone, to ak 99 : 1.

Beyond ferryl-mediated hydroxylation: 40 years of the rebound mechanism and C-H activation

Since our initial report in 1976, the oxygen rebound mechanism has become the consensus mechanistic feature for an expanding variety of enzymatic C-H functionalization reactions and small molecule biomimetic catalysts. For both the biotransformations and models, an initial hydrogen atom abstraction from the substrate (R-H) by high-valent iron-oxo species (Feⁿ=O) generates a substrate radical and a reduced iron hydroxide, [Fe^n-1-OH ·R]. This caged radical pair then evolves on a complicated energy landscape through a number of reaction pathways, such as oxygen rebound to form R-OH, rebound to a non-oxygen atom affording R-X, electron transfer of the incipient radical to yield a carbocation, R⁺, desaturation to form olefins, and radical cage escape. These various flavors of the rebound process, often in competition with each other, give rise to the wide range of C-H functionalization reactions performed by iron-containing oxygenases. In this review, we first recount the history of radical rebound mechanisms, their general features, and key intermediates involved. We will discuss in detail the factors that affect the behavior of the initial caged radical pair and the lifetimes of the incipient substrate radicals. Several representative examples of enzymatic C-H transformations are selected to illustrate how the behaviors of the radical pair [Fe^n-1-OH ·R] determine the eventual reaction outcome. Finally, we discuss the powerful potential of "radical rebound" processes as a general paradigm for developing novel C-H functionalization reactions with synthetic, biomimetic catalysts. We envision that new chemistry will continue to arise by bridging enzymatic "radical rebound" with synthetic organic chemistry.

Quantum mechanical/molecular mechanical calculated reactivity networks reveal how cytochrome P450cam and Its T252A mutant select their oxidation pathways

Quantum mechanical/molecular mechanical calculations address the longstanding-question of a "second oxidant" in P450 enzymes wherein the proton-shuttle, which leads to formation of the "primary-oxidant" Compound I (Cpd I), was severed by mutating the crucial residue (in P450cam: Threonine-252-to-Alanine, hence T252A). Investigating the oxidant candidates Cpd I, ferric hydroperoxide, and ferric hydrogen peroxide (Fe(III)(O2H2)), and their reactions, generates reactivity networks which enable us to rule out a "second oxidant" and at the same time identify an additional coupling pathway that is responsible for the epoxidation of 5-methylenylcamphor by the T252A mutant. In this "second-coupling pathway", the reaction starts with the Fe(III)(O2H2) intermediate, which transforms to Cpd I via a O-O homolysis/H-abstraction mechanism. The persistence of Fe(III)(O2H2) and its oxidative reactivity are shown to be determined by interplay of substrate and protein. The substrate 5-methylenylcamphor prevents H2O2 release, while the protein controls the Fe(III)(O2H2) conversion to Cpd I by nailing-through hydrogen-bonding interactions-the conformation of the HO(•) radical produced during O-O homolysis. This conformation prevents HO(•) attack on the porphyrin's meso position, as in heme oxygenase, and prefers H-abstraction from Fe(IV)OH thereby generating H2O + Cpd I. Cpd I then performs substrate oxidations. Camphor cannot prevent H2O2 release and hence the T252A mutant does not oxidize camphor. This "second pathway" transpires also during H2O2 shunting of the cycle of wild-type P450cam, where the additional hydrogen-bonding with Thr252 prevents H2O2 release, and contributes to a successful Cpd I formation. The present results lead to a revised catalytic cycle of Cytochrome P450cam.

Ab initio dynamics of the cytochrome P450 hydroxylation reaction

The iron(IV)-oxo porphyrin π-cation radical known as Compound I is the primary oxidant within the cytochromes P450, allowing these enzymes to affect the substrate hydroxylation. In the course of this reaction, a hydrogen atom is abstracted from the substrate to generate hydroxyiron(IV) porphyrin and a substrate-centered radical. The hydroxy radical then rebounds from the iron to the substrate, yielding the hydroxylated product. While Compound I has succumbed to theoretical and spectroscopic characterization, the associated hydroxyiron species is elusive as a consequence of its very short lifetime, for which there are no quantitative estimates. To ascertain the physical mechanism underlying substrate hydroxylation and probe this timescale, ab initio molecular dynamics simulations and free energy calculations are performed for a model of Compound I catalysis. Semiclassical estimates based on these calculations reveal the hydrogen atom abstraction step to be extremely fast, kinetically comparable to enzymes such as carbonic anhydrase. Using an ensemble of ab initio simulations, the resultant hydroxyiron species is found to have a similarly short lifetime, ranging between 300 fs and 3600 fs, putatively depending on the enzyme active site architecture. The addition of tunneling corrections to these rates suggests a strong contribution from nuclear quantum effects, which should accelerate every step of substrate hydroxylation by an order of magnitude. These observations have strong implications for the detection of individual hydroxylation intermediates during P450 catalysis.

Hot water-promoted cyclopropylcarbinyl rearrangement facilitates construction of homoallylic alcohols

Hot water can promote the rearrangements of various types of cyclopropyl carbinols to afford acyclic or cyclic homoallylic alcohols in high yields.

The reactivity of the active metal oxo and hydroxo intermediates and their implications in oxidations

The relationships of active metal oxo and hydroxo moieties have been summarized with their implications for biological and chemical oxidations.

Monooxygenase, peroxidase and peroxygenase properties and reaction mechanisms of cytochrome P450 enzymes

This review examines the monooxygenase, peroxidase and peroxygenase properties and reaction mechanisms of cytochrome P450 (CYP) enzymes in bacterial, archaeal and mammalian systems. CYP enzymes catalyze monooxygenation reactions by inserting one oxygen atom from O2 into an enormous number and variety of substrates. The catalytic versatility of CYP stems from its ability to functionalize unactivated carbon-hydrogen (C-H) bonds of substrates through monooxygenation. The oxidative prowess of CYP in catalyzing monooxygenation reactions is attributed primarily to a porphyrin π radical ferryl intermediate known as Compound I (CpdI) (Por•+FeIV=O), or its ferryl radical resonance form (FeIV-O•). CYP-mediated hydroxylations occur via a consensus H atom abstraction/oxygen rebound mechanism involving an initial abstraction by CpdI of a H atom from the substrate, generating a highly-reactive protonated Compound II (CpdII) intermediate (FeIV-OH) and a carbon-centered alkyl radical that rebounds onto the ferryl hydroxyl moiety to yield the hydroxylated substrate. CYP enzymes utilize hydroperoxides, peracids, perborate, percarbonate, periodate, chlorite, iodosobenzene and N-oxides as surrogate oxygen atom donors to oxygenate substrates via the shunt pathway in the absence of NAD(P)H/O2 and reduction-oxidation (redox) auxiliary proteins. It has been difficult to isolate the historically elusive CpdI intermediate in the native NAD(P)H/O2-supported monooxygenase pathway and to determine its precise electronic structure and kinetic and physicochemical properties because of its high reactivity, unstable nature (t½~2 ms) and short life cycle, prompting suggestions for participation in monooxygenation reactions of alternative CYP iron-oxygen intermediates such as the ferric-peroxo anion species (FeIII-OO-), ferric-hydroperoxo species (FeIII-OOH) and FeIII-(H2O2) complex.

Uranium-ligand multiple bonding in uranyl analogues, [L═U═L]n+, and the inverse trans influence

The societal importance of uranium complexes containing the uranyl moiety [O═U═O](2+) continues to grow with the ongoing international nuclear enterprise and associated accumulating legacy waste. Further studies of the electronic structure of uranyl and its analogues are imperative for the development of crucial technologies, including lanthanide/actinide extractants and chemical and environmental remediation methodologies. Actinide oxo halides are a subset of the growing class of actinyl (uranyl) analogues. The understanding of their electronic structures links the detailed spectroscopic studies of uranyl, indicating the role of the pseudocore 6p orbitals in U-O bonding, to hypotheses about the 6p orbitals' role in the chemical bonding of uranyl analogues. These actinide oxo halides are a very small class of actinide compounds that present the inverse trans influence (ITI). This class of complexes was, until recently, limited to two crystallographically characterized compounds, namely, [UCl(5)O][PPh(4)] and [PaCl(5)O][NEt(4)](2). These complexes are important because they give a readily and clearly defined experimental observable: the difference between the M-X(trans) and M-X(cis) (here X = Cl) bond lengths in the solid state. This bond metric is a sensitive probe for the role of 6p, 6d, and 5f orbitals, as well as electrostatic interactions, in determining their electronic structure. This Viewpoint Article reviews the theoretical, experimental, and synthetic work on the ITI in actinide complexes and contextualizes it within broader studies on the electronic structure of uranyl and its analogues. Furthermore, our recent work on the ITI in high-valent uranium(V/VI) oxo and imido complexes is described as a whole. This work builds on the extant synthetic literature on the ITI and provides design parameters for the synthesis and characterization of high-valent uranium-ligand multiple bonds.

Diversity of P450 enzymes in the biosynthesis of natural products

Diverse oxygenation patterns of natural products generated by secondary metabolic pathways in microorganisms and plants are largely achieved through the tailoring reactions catalysed by cytochrome P450 enzymes (P450s). P450s are a large family of oxidative hemoproteins found in all life forms from prokaryotes to humans. Understanding the reactivity and selectivity of these fascinating C-H bond-activating catalysts will advance their use in generating valuable pharmaceuticals and products for medicine, agriculture and industry. A major strength of this P450 group is its set of established enzyme-substrate relationships, the source of the most detailed knowledge on how P450 enzymes work. Engineering microbial-derived P450 enzymes to accommodate alternative substrates and add new functions continues to be an important near- and long-term practical goal driving the structural characterization of these molecules. Understanding the natural evolution of P450 structure-function should accelerate metabolic engineering and directed evolutionary approaches to enhance diversification of natural product structures and other biosynthetic applications.

Minor activities and transition state properties of the human steroid hydroxylases cytochromes P450c17 and P450c21, from reactions observed with deuterium-labeled substrates

The steroid hydroxylases CYP17A1 (P450c17, 17-hydroxylase/17,20-lyase) and CYP21A2 (P450c21, 21-hydroxylase) catalyze progesterone hydroxylation at one or more sites within a 2 Å radius. We probed their hydrogen atom abstraction mechanisms and regiochemical plasticity with deuterium-labeled substrates: 17-[(2)H]-pregnenolone; 17-[(2)H]-, 16α-[(2)H]-, 21,21,21-[(2)H(3)]-, and 21-[(2)H]-progesterone; and 21,21,21-[(2)H(3)]-17-hydroxyprogesterone. Product distribution and formation rates with recombinant human P450-oxidoreductase and wild-type human CYP17A1 or mutation A105L (reduced progesterone 16α-hydroxylation) and wild-type human CYP21A2 or mutation V359A (substantial progesterone 16α-hydroxylation) were used to calculate intramolecular and intermolecular kinetic isotope effects (KIEs). The intramolecular KIEs for CYP17A1 and mutation A105L were 4.1 and 3.8, respectively, at H-17 and 2.9 and 5.1, respectively, at H-16α. Mutation A105L 21-hydroxylates progesterone (5% of products), and wild-type CYP17A1 also catalyzes a trace of 21-hydroxylation, which increases with 16α-[(2)H]- and 17-[(2)H]-progesterone. The intramolecular KIEs with CYP21A2 mutation V359A and progesterone were 6.2 and 3.8 at H-21 and H-16α, respectively. Wild-type CYP21A2 also forms a trace of 16α-hydroxyprogesterone, which increased with 21,21,21-[(2)H(3)]-progesterone substrate. Competitive intermolecular KIEs paralleled the intramolecular KIE values, with (D)V values of 1.4-5.1 and (D)V/K values of 1.8-5.1 for these reactions. CYP17A1 and CYP21A2 mutation V359A both 16α-hydroxylate 16α-[(2)H]-progesterone with 33-44% deuterium retention, indicating stereochemical inversion. We conclude that human CYP17A1 has progesterone 21-hydroxylase activity and human CYP21A2 has progesterone 16α-hydroxylase activity, both of which are enhanced with deuterated substrates. The transition states for C-H bond cleavage in these hydroxylation reactions are either significantly nonlinear and/or asymmetric, and C-H bond breakage is partially rate-limiting for all reactions.

Adaptive organic nanoparticles of a teflon-coated iron (III) porphyrin catalytically activate dioxygen for cyclohexene oxidation

Self-organized organic nanoparticles (ONP) are adaptive to the environmental reaction conditions. ONP of fluorous alkyl iron(III) porphyrin catalytically oxidize cyclohexene to the allylic oxidation products. In contrast, the solvated metalloporphyrin yields both allylic oxidation and epoxidation products. The ONP system facilitates a greener reaction because about 89% reaction medium is water, molecular oxygen is used in place of synthetic oxidants, and the ambient reaction conditions used require less energy. The enhanced catalytic activity of these ONP is unexpected because the metalloporphyrins in the nanoaggregates are in the close proximity and the TON should diminish by self-oxidative degradation. The fluorous alkyl chain stabilizes the ONP toward self-oxidative degradation.

Nanoaggregates of Mn(III)tetraperfluorophenylporphyrin: a greener approach for allylic oxidation of olefins

Organic nanoparticles of metalloporphyrins can be a versatile catalyst for the selective oxidation of alkenes and other hydrocarbons. The catalytic activity of the metalloporphyrin depends on the nature of the central metal atom, peripheral groups, and the architecture of the porphyrin macrocycle. Herein, we report the catalytic activity of organic nanoparticles of 5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)porphyrinato manganese(III), Mn (III)TPPF20, for the oxidation of cyclohexene using molecular oxygen as an oxidant in aqueous solvent under ambient conditions. While the solvated metalloporphyrins catalytically oxidize alkenes to the corresponding epoxide with a modest turn-over numbers, ca. 30 nm organic nanoparticles of Mn (III)TPPF20 have enhanced catalytic activity with up to a two-fold greater turn-over number and yields only allylic oxidation products. The activity of organic nanoparticles is slow compared to the solvated metalloporphyrins. These organic nanoparticles catalytic systems facilitate a greener reaction since ca. 89% of the reaction medium is water, molecular oxygen is used in place of man-made oxidants, and the ambient reaction conditions require less energy. This organic nanoparticle catalytic system also avoids using halogenated solvents commonly used in solution phase reactions. The enhanced catalytic activity of these organic nanoparticles is unexpected because the metalloporphyrins in the nanoaggregates are in the close proximity and the turn-over number should diminish by self-oxidative degradation.

Oxidation of 10-undecenoic acid by cytochrome P450(BM-3) and its Compound I transient

Oxidations of 10-undecenoic acid by cytochrome P450(BM-3) and its Compound I transient were studied. The only product formed in Compound I oxidations was 10,11-epoxyundecanoic acid, whereas the enzyme under turnover conditions gave the epoxide and 9-hydroxy-10-undecenoic acid in a 10 : 90 ratio. Kinetic studies at 0 °C of oxidations by Compounds I formed by MCPBA oxidation and by a photo-oxidation pathway gave the same results, displaying saturation kinetics that yielded equilibrium binding constants and first-order oxidation rate constants that were experimentally indistinguishable. Oxidation of 10-undecenoic acid by Compound I from CYP119 generated by MCBPA oxidation also gave 10,11-epoxyundecanoic acid as the only product. CYP119 Compound I bound the substrate less strongly but reacted with a faster oxidation rate constant than P450(BM-3) Compound I. The kinetic parameters for oxidation of the substrate by P450(BM-3) under turnover conditions were similar to those of the Compound I transient even though the products differed.

The kinetic mechanism for cytochrome P450 metabolism of type II binding compounds: evidence supporting direct reduction

The metabolic stability of a drug is an important property that should be optimized during drug design and development. Nitrogen incorporation is hypothesized to increase the stability by coordination of nitrogen to the heme iron of cytochrome P450, a binding mode that is referred to as type II binding. However, we noticed that the type II binding compound 1 has less metabolic stability at sub-saturating conditions than a closely related type I binding compound 3. Three kinetic models will be presented for type II binder metabolism; (1) Dead-end type II binding, (2) a rapid equilibrium between type I and II binding modes before reduction, and (3) a direct reduction of the type II coordinated heme. Data will be presented on reduction rates of iron, the off rates of substrate (using surface plasmon resonance) and the catalytic rate constants. These data argue against the dead-end, and rapid equilibrium models, leaving the direct reduction kinetic mechanism for metabolism of the type II binding compound 1.

Cytochrome P450 compound I: capture, characterization, and C-H bond activation kinetics

Cytochrome P450 enzymes are responsible for the phase I metabolism of approximately 75% of known pharmaceuticals. P450s perform this and other important biological functions through the controlled activation of C-H bonds. Here, we report the spectroscopic and kinetic characterization of the long-sought principal intermediate involved in this process, P450 compound I (P450-I), which we prepared in approximately 75% yield by reacting ferric CYP119 with m-chloroperbenzoic acid. The Mössbauer spectrum of CYP119-I is similar to that of chloroperoxidase compound I, although its electron paramagnetic resonance spectrum reflects an increase in |J|/D, the ratio of the exchange coupling to the zero-field splitting. CYP119-I hydroxylates the unactivated C-H bonds of lauric acid [D(C-H) ~ 100 kilocalories per mole], with an apparent second-order rate constant of k(app) = 1.1 × 10(7) per molar per second at 4°C. Direct measurements put a lower limit of k ≥ 210 per second on the rate constant for bound substrate oxidation, whereas analyses involving kinetic isotope effects predict a value in excess of 1400 per second.

Active intermediates in heme monooxygenase reactions as revealed by cryoreduction/annealing, EPR/ENDOR studies

This review describes the use of cryoreduction/annealing EPR/ENDOR techniques for determining the active oxidizing species in reactions catalyzed by heme monooxygenases. The three candidate heme states are: ferric peroxo, ferric hydroperoxo and compound I intermediates. The enzymes discussed include cytochromes P450, nitric oxide synthase and heme oxygenase.

Structure of cytochrome P450 PimD suggests epoxidation of the polyene macrolide pimaricin occurs via a hydroperoxoferric intermediate

We present the X-ray structure of PimD, both substrate-free and in complex with 4,5-desepoxypimaricin. PimD is a cytochrome P450 monooxygenase with native epoxidase activity that is critical in the biosynthesis of the polyene macrolide antibiotic pimaricin. Intervention in this secondary metabolic pathway could advance the development of drugs with improved pharmacologic properties. Epoxidation by P450 typically includes formation of a charge-transfer complex between an oxoferryl pi-cation radical species (Compound I) and the olefin pi-bond as the initial intermediate. Catalytic and structural evidence presented here suggest that epoxidation of 4,5-desepoxypimaricin proceeds via a hydroperoxoferric intermediate (Compound 0). The oxygen atom of Compound 0 distal to the heme iron may insert into the double bond of the substrate to make an epoxide ring. Stereoelectronic features of the putative transition state suggest substrate-assisted proton delivery.

Enhanced catalytic activity and unexpected products from the oxidation of cyclohexene by organic nanoparticles of 5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)porphyrinatoiron(III) in water by using O2

The catalytic oxidation of alkenes by most iron porphyrins using a variety of oxygen sources, but generally not dioxygen, yields the epoxide with minor quantities of other products. The turnover numbers for these catalysts are modest, ranging from a few hundred to a few thousand depending on the porphyrin structure, axial ligands, and other reaction conditions. Halogenation of substituents increases the activity of the metalloporphyrin catalyst and/or makes it more robust to oxidative degradation. Oxidation of cyclohexene by 5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorophenyl)porphyrinato iron(III), ([Fe(III)(tppf(20))]) and H(2)O(2) is typical of the latter: the epoxide is 99 % of the product and turnover numbers are about 350.1-4 Herein, we report that dynamic organic nanoparticles (ONPs) of [Fe(III)(tppf(20))] with a diameter of 10 nm, formed by host-guest solvent methods, catalytically oxidize cyclohexene with O(2) to yield only 2-cyclohexene-1-one and 2-cyclohexene-1-ol with approximately 10-fold greater turnover numbers compared to the non-aggregated metalloporphyrin in acetonitrile/methanol. These ONPs facilitate a greener reaction because the reaction solvent is 89 % water and O(2) is the oxidant in place of synthetic oxygen sources. This reactivity is unexpected because the metalloporphyrins are in close proximity and oxidative degradation of the catalyst should be enhanced, thus causing a significant decrease in catalytic turnovers. The allylic products suggest a different oxidative mechanism compared to that of the solvated metalloporphyrins. These results illustrate the unique properties of some ONPs relative to the component molecules or those attached to supports.

Quantitative production of compound I from a cytochrome P450 enzyme at low temperatures. Kinetics, activation parameters, and kinetic isotope effects for oxidation of benzyl alcohol

Cytochrome P450 enzymes are commonly thought to oxidize substrates via an iron(IV)-oxo porphyrin radical cation transient termed Compound I, but kinetic studies of P450 Compounds I are essentially nonexistent. We report production of Compound I from cytochrome P450 119 (CYP119) in high conversion from the corresponding Compound II species at low temperatures in buffer mixtures containing 50% glycerol by photolysis with 365 nm light from a pulsed lamp. Compound I was studied as a reagent in oxidations of benzyl alcohol and its benzylic mono- and dideuterio isotopomers. Pseudo-first-order rate constants obtained at -50 degrees C with concentrations of substrates between 1.0 and 6.0 mM displayed saturation kinetics that gave binding constants for the substrate in the Compound I species (K(bind)) and first-order rate constants for the oxidation reactions (k(ox)). Representative results are K(bind) = 214 M(-1) and k(ox) = 0.48 s(-1) for oxidation of benzyl alcohol. For the dideuterated substrate C(6)H(5)CD(2)OH, kinetics were studied between -50 and -25 degrees C, and a van't Hoff plot for complexation and an Arrhenius plot for the oxidation reaction were constructed. The H/D kinetic isotope effects (KIEs) at -50 degrees C were resolved into a large primary KIE (P = 11.9) and a small, inverse secondary KIE (S = 0.96). Comparison of values extrapolated to 22 degrees C of both the rate constant for oxidation of C(6)H(5)CD(2)OH and the KIE for the nondeuterated and dideuterated substrates to values obtained previously in laser flash photolysis experiments suggested that tunneling could be a significant component of the total rate constant at -50 degrees C.

Mechanistic aspects of CYP74 allene oxide synthases and related cytochrome P450 enzymes

The existence of CYP5, CYP8A, and the CYP74 enzymes specialized for reaction with fatty acid peroxide substrates presents opportunities for a "different look" at the catalytic cycle of the cytochrome P450s. This review considers how the properties of the peroxide-metabolizing enzymes are distinctive, and how they tie in with those of the conventional monooxygenase enzymes. Some unusual reactions of each class have parallels in the other. As enzyme reactions and P450 structures emerge there will be possibilities for finding their special properties and edging this knowledge into the big picture.

S K-edge XAS and DFT calculations on cytochrome P450: covalent and ionic contributions to the cysteine-Fe bond and their contribution to reactivity

Experimental covalencies of the Fe-S bond for the resting low-spin and substrate-bound high-spin active site of cytochrome P450 are reported. DFT calculations on the active site indicate that one H-bonding interaction from the protein backbone is needed to reproduce the experimental values. The H-bonding to the thiolate from the backbone decreases the anisotropic pi covalency of the Fe-S bond lowering the barrier of free rotation of the exchangeable axial ligand, which is important for reactivity. The anionic axial thiolate ligand is calculated to lower the Fe(III/II) reduction potential of the active site by more than 1 V compared to a neutral imidazole ligand. About half of this derives from its covalent bonding and half from its electrostatic interaction with the oxidized Fe. This axial thiolate ligand increases the pK(a) of compound 0 (Fe(III)-hydroperoxo) favoring its protonation which promotes O-O bond heterolysis forming compound I. The reactivity of compound I is calculated to be relatively insensitive to the nature of the axial ligand due to opposing reduction potential and proton affinity contributions to the H-atom abstraction energy.

Self-organized porphyrinic materials

The self-assembly and self-organization of porphyrins and related macrocycles enables the bottom-up fabrication of photonic materials for fundamental studies of the photophysics of these materials and for diverse applications. This rapidly developing field encompasses a broad range of disciplines including molecular design and synthesis, materials formation and characterization, and the design and evaluation of devices. Since the self-assembly of porphyrins by electrostatic interactions in the late 1980s to the present, there has been an ever increasing degree of sophistication in the design of porphyrins that self-assemble into discrete arrays or self-organize into polymeric systems. These strategies exploit ionic interactions, hydrogen bonding, coordination chemistry, and dispersion forces to form supramolecular systems with varying degrees of hierarchical order. This review concentrates on the methods to form supramolecular porphyrinic systems by intermolecular interactions other than coordination chemistry, the characterization and properties of these photonic materials, and the prospects for using these in devices. The review is heuristically organized by the predominant intermolecular interactions used and emphasizes how the organization affects properties and potential performance in devices.

Kinetic isotope effects in hydroxylation reactions effected by cytochrome P450 compounds I implicate multiple electrophilic oxidants for P450-catalyzed oxidations

Kinetic isotope effects were measured for oxidations of (S,S)-2-(p-trifluoromethylphenyl)cyclopropylmethane containing zero, two, and three deuterium atoms on the methyl group by Compounds I from the cytochrome P450 enzymes CYP119 and CYP2B4 at 22 degrees C. The oxidations displayed saturation kinetics, which permitted solution of both binding constants (K(bind)) and first-order oxidation rate constants (k(ox)) for both enzymes with the three substrates. The binding constant for CYP2B4 Compound I was about 1 order of magnitude greater than that for CYP119 Compound I, but the oxidation rate constants were similar for the two. In oxidations of 1-d(0), k(ox) = 10.4 s(-1) for CYP119 Compound I, and k(ox) = 12.4 s(-1) for CYP2B4 Compound I. Primary kinetic isotope effects (P) and secondary kinetic isotope effects (S) were obtained from the results with the three isotopomers. The primary KIEs were large, P = 9.8 and P = 8.9 for CYP119 and CYP2B4 Compounds I, respectively, and the secondary KIEs were small and normal, S = 1.07 and S = 1.05, respectively. Large intermolecular KIEs for 1-d(0) and 1-d(3) of k(H)/k(D) = 11.2 and 9.8 found for the two Compounds I contrast with small intermolecular KIEs obtained previously for the same substrate in P450-catalyzed oxidations; these differences suggest that a second electrophilic oxidant, presumably iron-complexed hydrogen peroxide, is important in cytochrome P450 oxidations under turnover conditions.

Kinetics of oxidation of benzphetamine by compounds I of cytochrome P450 2B4 and its mutants

Cytochromes P450 are ubiquitous heme-containing enzymes that catalyze a wide range of reactions in nature including many oxidation reactions. The active oxidant species in P450 enzymes are widely thought to be iron(IV)-oxo porphyrin radical cations, termed Compound I species, but these intermediates have not been observed under turnover conditions. We prepared Compounds I of the mammalian hepatic P450 enzyme CYP2B4 and three mutants (E301Q, T302A, and F429H) by laser flash photolysis of the Compound II species that, in turn, were prepared by reaction of the resting enzymes with peroxynitrite. The PN treatment resulted in a small amount of nitration of the P450 as determined by mass spectrometry but no change in reactivity of the P450 in a test reaction. CYP2B4 Compound I oxidized benzphetamine to norbenzphetamine in high yield in bulk studies. In direct kinetic studies of benzphetamine oxidations, Compounds I displayed saturation kinetics with similar binding equilibrium constants (K(bind)) for each. The first-order oxidation rate constants (k(ox)) were comparable for Compounds I of CYP2B4, the E301Q mutant, and the T302A mutant, whereas the k(ox) for Compound I of the F429H mutant was reduced by a factor of 2. CYP119 Compound I, studied for comparison purposes, reacted with benzphetamine with a binding constant that was nearly an order of magnitude smaller than that of CYP2B4 but a rate constant that was similar. Substrate binding constants for P450 Compound I are important for controlling overall rates of oxidation reactions, and the intrinsic reactivities of Compounds I from various P450 enzymes are comparable.