Simultaneous Tailoring of Phase Evolution and Dopant Distribution in the Glassy Phase for Controllable Luminescence

CO2 Stress-Driven Room Temperature Ferromagnetism of Ultrathin 2D Gallium Oxide

Spintronic devices work by manipulating the spin of electrons other than charge transfer, which is of revolutionary significance and can largely reduce energy consumption in the future. Herein, ultrathin two-dimensional (2D) non-van der Waals (non-vdW) γ-Ga2O3 with room temperature ferromagnetism is successfully obtained by using supercritical CO2 (SC CO2). The stress effect of SC CO2 under different pressures selectively modulates the orientation and strength of covalent bonds, leading to the change of atomic structure including lattice expansion, introduction of O vacancy, and transition of Ga-O coordination (GaO4 and GaO6). Magnetic measurements show that pristine γ-Ga2O3 is nonferromagnetic, whereas the SC CO2 treated γ-Ga2O3 exhibits obvious ferromagnetic behavior with an optimal magnetization of 0.025 emu g-1 and a Curie temperature of 300 K.

Structured Scintillators for Efficient Radiation Detection

Scintillators, which can convert high-energy ionizing radiation into visible light, have been serving as the core component in radiation detectors for more than a century of history. To address the increasing application demands along with the concern on nuclear security, various strategies have been proposed to develop a next-generation scintillator with a high performance in past decades, among which the novel approach via structure control has received great interest recently due to its high feasibility and efficiency. Herein, the concept of "structure engineering" is proposed for the exploration of this type of scintillators. Via internal or external structure design with size ranging from micro size to macro size, this promising strategy cannot only improve scintillator performance, typically radiation stopping power and light yield, but also extend its functionality for specific applications such as radiation imaging and therapy, opening up a new range of material candidates. The research and development of various types of structured scintillators are reviewed. The current state-of-the-art progresses on structure design, fabrication techniques, and the corresponding applications are discussed. Furthermore, an outlook focusing on the current challenges and future development is proposed.

Broadband near-infrared persistent luminescence in Ni2+-doped transparent glass-ceramic ZnGa2O4

ZnGa2O4:Ni2+ glass-ceramic exhibits a second near-infrared emission band peaking at 1240 nm and persistent luminescence properties.

Structure and Luminescence Properties of Transparent Germanate Glass-Ceramics Co-Doped with Ni2+/Er3+ for Near-Infrared Optical Fiber Application

An investigation of the structural and luminescent properties of the transparent germanate glass-ceramics co-doped with Ni²⁺/Er³⁺ for near-infrared optical fiber applications was presented. Modification of germanate glasses with 10–20 ZnO (mol.%) was focused to propose the additional heat treatment process controlled at 650 °C to obtain transparent glass-ceramics. The formation of 11 nm ZnGa₂O₄ nanocrystals was confirmed by the X-ray diffraction (XRD) method. It followed the glass network changes analyzed in detail (MIR—Mid Infrared spectroscopy) with an increasing heating time of precursor glass. The broadband 1000–1650 nm luminescence (λ_exc = 808 nm) was obtained as a result of Ni²⁺: ³T₂(³F) → ³A₂(³F) octahedral Ni²⁺ ions and Er³⁺: ⁴I_13/2 → ⁴I_15/2 radiative transitions and energy transfer from Ni²⁺ to Er³⁺ with the efficiency of 19%. Elaborated glass–nanocrystalline material is a very promising candidate for use as a core of broadband luminescence optical fibers.

Femtosecond laser induced thermophoretic writing of waveguides in silicate glass

Here in, the fs-laser induced thermophoretic writing of microstructures in ad-hoc compositionally designed silicate glasses and their application as infrared optical waveguides is reported. The glass modification mechanism mimics the elemental thermal diffusion occurring in basaltic liquids at the Earth's mantle, but in a much shorter time scale (108 times faster) and over a well-defined micrometric volume. The precise addition of BaO, Na2O and K2O to the silicate glass enables the creation of positive refractive index contrast upon fs-laser irradiation. The influence of the focal volume and the induced temperature gradient is thoroughly analyzed, leading to a variety of structures with refractive index contrasts as high as 2.5 × 10-2. Two independent methods, namely near field measurements and electronic polarizability analysis, confirm the magnitude of the refractive index on the modified regions. Additionally, the functionality of the microstructures as waveguides is further optimized by lowering their propagation losses, enabling their implementation in a wide range of photonic devices.

Glass crystallization making red phosphor for high-power warm white lighting

Rapid development of solid-state lighting technology requires new materials with highly efficient and stable luminescence, and especially relies on blue light pumped red phosphors for improved light quality. Herein, we discovered an unprecedented red-emitting Mg₂Al₄Si₅O₁₈:Eu²⁺ composite phosphor (λ_ex = 450 nm, λ_em = 620 nm) via the crystallization of MgO-Al₂O₃-SiO₂ aluminosilicate glass. Combined experimental measurement and first-principles calculations verify that Eu²⁺ dopants insert at the vacant channel of Mg₂Al₄Si₅O₁₈ crystal with six-fold coordination responsible for the peculiar red emission. Importantly, the resulting phosphor exhibits high internal/external quantum efficiency of 94.5/70.6%, and stable emission against thermal quenching, which reaches industry production. The maximum luminous flux and luminous efficiency of the constructed laser driven red emitting device reaches as high as 274 lm and 54 lm W^-1, respectively. The combinations of extraordinary optical properties coupled with economically favorable and innovative preparation method indicate, that the Mg₂Al₄Si₅O₁₈:Eu²⁺ composite phosphor will provide a significant step towards the development of high-power solid-state lighting.

CsRe2F7@glass nanocomposites with efficient up-/down-conversion luminescence: from in situ nanocrystallization synthesis to multi-functional applications

Recently, lanthanide-doped luminescent materials have been widely studied and most investigations have been limited to rare-earth-containing fluorides formed with lighter alkali metals (Li, Na and K). Hence, it is important to understand the luminescence properties of cesium rare-earth fluorides. Herein, a novel type of multi-functional luminescent material, hexagonal β-CsRe2F7 (Re = La-Lu, Y, Sc) nanocrystals, is successfully prepared via in situ crystallization inside glass. Specifically, Yb/Er:β-CsLu2F7@glass exhibits a much higher upconversion quantum yield than Yb/Er:β-NaYF4@glass (about 6 times), which is believed to be one of the most efficient upconversion materials so far. Impressively, Er:CsYb2F7@glass shows a significant photothermal effect, which can produce variable upconversion emission colors induced by an incident 980 nm laser diode, enabling it to find practical application in novel/high-precision anti-counterfeiting. In addition, Ce:CsLu2F7@glass with a maximal photoluminescence quantum yield reaching 67% can yield intense X-ray excitable radioluminescence, which is even higher than that of a commercial Bi4Ge3O12 scintillator. Benefitting from the effective protection of robust oxide glass, lanthanide-doped CsRe2F7 nanocrystals show long-term stability in harsh environments, retaining near 100% luminescence after directly immersing them in water/oil for 30 days. It is expected that the present nanocomposites have potential applications in the fields of high-end upconversion anti-counterfeiting and high-energy radiation detection.

Simultaneous Tailoring of Dual-Phase Fluoride Precipitation and Dopant Distribution in Glass to Control Upconverting Luminescence

In situ glass crystallization is an effective strategy to integrate lanthanide-doped upconversion nanocrystals into amorphous glass, leading to new hybrid materials and offering an unexploited way to study light-particle interactions. However, the precipitation of Sc³⁺-based nanocrystals from glass is rarely reported and the incorporation of lanthanide activators into the Sc³⁺-based crystalline lattice is formidably difficult owing to their large radius mismatch. Herein, it is demonstrated that lanthanide dopants with smaller ionic radii can act as nucleating agents to promote the nucleation/growth of KSc₂F₇ nanocrystals in oxyfluoride aluminosilicate glass. A series of structural and spectroscopic characterizations indicate that Ln-dopant-induced K/Sc/Ln/F amorphous phase separation from glass is an essential prerequisite for the precipitation of KSc₂F₇ and the partition of Ln dopants into the KSc₂F₇ lattice by substituting Sc³⁺ ions. Importantly, modifying the Ln-to-Sc ratio in glass enables to control competitive crystallization of KSc₂F₇ and Ln-based (KYb₂F₇, KLu₂F₇, and KYF₄) nanocrystals and produce dual-phase fluoride-embedded nanocomposites with distinct crystal fields. Consequently, tunable multicolor upconversion luminescence can be achieved through diversified regulatory approaches, such as adjustment of the dual-phase ratio, selective separation of Ln³⁺ dopants, and alteration of incident pumping laser. As a proof-of-concept experiment, the application of dual-phase glass as a color converter in 980 nm laser-driven upconverting lighting is demonstrated.

Reversible Modulated Upconversion Luminescence of MoO3:Yb3+,Er3+ Thermochromic Phosphor for Switching Devices

Reversible modulation of upconversion luminescence induced by the external field stimuli exhibits potential applications in various fields, such as photoswitches, optical sensing, and optical memory devices. Herein, a new MoO₃:Yb³⁺,Er³⁺ thermochromic phosphor was synthesized via a high-temperature solid-state method, and the reversible color modification of the MoO₃:Yb³⁺,Er³⁺ phosphor was obtained by alternating the sintering conditions either in a reducing atmosphere or in air. The color of the MoO₃:Yb³⁺,Er³⁺ phosphor changed from light-yellow to blue under sintering in the reducing atmosphere and returned back after sintering again in air. The influence of reversible thermochromism on the upconversion luminescence of MoO₃:Yb³⁺,Er³⁺ phosphor was investigated. The MoO₃:Yb³⁺,Er³⁺ phosphor prepared in air exhibited visible upconversion luminescence, while the MoO₃:Yb³⁺,Er³⁺ phosphor has no upconversion luminescence after sintering in the reducing atmosphere. This up-conversion luminescence modulation shows excellent reproducibility after several cycles. The thermochromic MoO₃:Yb³⁺,Er³⁺ phosphor with reversible modulated upconversion luminescence shows great potential for practical applications in optical switches and optoelectronic multifunctional devices.

Photovoltaic Effect of a Ferroelectric-Luminescent Heterostructure under Infrared Light Illumination

In this report, a ferroelectric-luminescent heterostructure is designed to convert infrared light into electric power. We use BiFeO₃ (BFO) as the ferroelectric layer and Y₂O₃:Yb,Tm (YOT) as the upconversion layer. Different from conventional ferroelectric materials, this heterostructure exhibits switchable and stable photovoltaic effects under 980 nm illumination, whose energy is much lower than the band gap of BFO. The energy transfer mechanism in this heterostructure is therefore studied carefully. It is found that a highly efficient nonradiative energy transfer process from YOT to BFO plays a critical role in achieving the below-band-gap photon-excited photovoltaic effects in this heterostructure. Our results also indicate that by introducing asymmetric electrodes, both the photovoltage and photocurrent are further enhanced when the built-in field and the depolarization field are aligned. The construction of ferroelectric-luminescent heterostructure is consequently proposed as a promising route to enhance the photovoltaic effects of ferroelectric materials by extending the absorption of the solar spectrum.

Thermomchromic Reaction-Induced Reversible Upconversion Emission Modulation for Switching Devices and Tunable Upconversion Emission Based on Defect Engineering of WO3:Yb3+,Er3+ Phosphor

Reversible luminescence modulation of upconversion phosphors has the potential applications as photoswitches and optical memory and data storage devices. Previously, the photochromic reaction was extensively used for the realization of reversible luminescence modulation. It is very necessary to develop other approaches such as thermomchromic reaction to obtain the reversible upconversion luminescence modulation. In this work, the WO₃:Yb³⁺,Er³⁺ phosphors with various colors were prepared at various temperatures, exhibiting tunable upconversion luminescence attributed to the formation of oxygen vacancies in the host. Upon heat treatment in the reducing atmosphere or air, the WO₃:Yb³⁺,Er³⁺ phosphors show a reversible thermomchromic property. The reversible upconversion luminescence modulation of WO₃:Yb³⁺,Er³⁺ phosphors was observed based on thermomchromic reaction. Additionally, the upconversion luminescence modulation is maintained after several cycles, indicating its excellent stability. The WO₃:Yb³⁺,Er³⁺ phosphors with reversible upconversion luminescence and excellent reproducibility have potential applications as the photoswitches and optical memory and data storage devices.

Continuous tunable broadband emission of fluorphosphate glasses for single-component multi-chromatic phosphors

A kind of Sn²⁺/Mn²⁺ co-doped fluorphosphate (FP) glasses that served as single-component continuous tunable broadband emitting multi-chromatic phosphors are developed for the first time. Importantly, these FP glasses have high thermal conductivity (3.25-3.70  W/m·K) and good chemical stability in water (80°C). By combining with commercially available UV-LEDs directly, the emission colors can be tuned from blue/cold-white to warm-white/red through the energy transfer from Sn²⁺ to Mn²⁺, and the broadband spectra covering the whole visible region from 380 nm to 760 nm. Notably, the FP glass can also serve as a white light phosphor by controlling the content of SnO/MnO, which has excellent optical properties. The CIE chromaticity coordinate, color rendering index, and quantum efficiency are (0.33, 0.29), 84, and 0.952, respectively. These new phosphors, possessing good optical and chemical properties, are promising for applications in solid-state lighting devices.

A strategy for fabrication of controllable 3D pattern containing clusters and nanoparticles inside a solid material

Directly controlling the growth process of clusters and nanoparticles is an effective way to tune their specific properties, which has been considered as a significant issue lying at the heart of nanotechnology. For technological applications, great strides have been made in the assembly of clusters and nanoparticles. However, controllable synthesis of clusters and nanoparticles inside a bulk solid-state medium remains a tremendous challenge, which is important for integrated devices. Here we report a strategy for space-selective control of elemental tellurium (Te) precipitation as clusters or nanoparticles in glass by femtosecond (fs) laser irradiation. After irradiation by a 1 kHz fs laser at 800 nm, Te₂ clusters, which emit near-infrared (NIR) light, are observed at the focal point of the laser beam inside the glass sample. By shifting the repetition rate to 250 kHz, a temperature field forms around the focal area that facilitates transformation of Te clusters into nanoparticles. Raman mapping shows that the clusters are localized in the center of the laser-induced microstructure, while the nanoparticles exhibit an annular distribution. The possible mechanisms of generation and distribution of different species are discussed. We have also demonstrated optical data storage and embedded micro-grating by using this technique.

In-Situ Phase Transition Control in the Supercooled State for Robust Active Glass Fiber

The construction of a dopant-activated photonic composite is of great technological importance for various applications, including smart lighting, optical amplification, laser, and optical detection. The bonding arrangement around the introduced dopants largely determines the properties, yet it remains a daunting challenge to manipulate the local state of the matrix (i.e., phase) inside the transparent composite in a controllable manner. Here we demonstrate that the relaxation of the supercooled state enables in-situ phase transition control in glass. Benefiting from the unique local atom arrangement manner, the strategy offers the possibility for simultaneously tuning the chemical environment of the incorporated dopant and engineering the dopant-host interaction. This allows us to effectively activate the dopant with high efficiency (calculated as ∼100%) and profoundly enhance the dopant-host energy-exchange interaction. Our results highlight that the in-situ phase transition control in glass may provide new opportunities for fabrication of unusual photonic materials with intense broadband emission at ∼1100 nm and development of the robust optical detection unit with high compactness and broadband photon-harvesting capability (from X-ray to ultraviolet light).

Selective doping of Ni2+ in highly transparent glass-ceramics containing nano-spinels ZnGa2O4 and Zn1+x Ga2-2x Ge x O4 for broadband near-infrared fiber amplifiers

Selective doping of Ni²⁺ in octahedral sites provided by nanocrystals embedded in glass-ceramics (GCs) is crucial to the enhancement of broadband near-infrared (NIR) emission. In this work, a NIR emission with a full-width-at-half-maximum (FWHM) of 288 nm is first reported from ZnGa₂O₄: Ni²⁺ nano-spinels embedded GCs with excellent transparency. A comparison is made of the NIR luminescence properties of Ni²⁺ doped GCs containing ZnGa₂O₄, germanium-substituted ZnGa₂O₄ nano-spinels (Zn_1+xGa_2−2xGe_xO₄), and Zn₂GeO₄/Li₂Ge₄O₉ composite nanocrystals that are free of Ga³⁺. The results show that ZnGa₂O₄: Ni²⁺ GCs exhibit a significantly enhanced NIR emission. The incorporation of the nucleating agent TiO₂ is favored in terms of the increased luminescence intensity and prolonged lifetime. The possible causes for the enhancement effect are identified from the crystal structure/defects viewpoint. The newly developed GCs incorporate good reproducibility to allow for a tolerance of thermal treatment temperature and hence hold great potential of fiberization via the recently proposed “melt-in-tube” method. They can be considered as promising candidates for broadband fiber amplifiers.

Glass-ceramic optical fiber containing Ba2TiSi2O8 nanocrystals for frequency conversion of lasers

A glass-ceramic optical fiber containing Ba₂TiSi₂O₈ nanocrystals fabricated using a novel combination of the melt-in-tube method and successive heat treatment is reported for the first time. For the melt-in-tube method, fibers act as a precursor at the drawing temperature for which the cladding glass is softened while the core glass is melted. It is demonstrated experimentally that following heat treatment, Ba₂TiSi₂O₈ nanocrystals with diameters below 10 nm are evenly distributed throughout the fiber core. Comparing to the conventional rod-in-tube method, the melt-in-tube method is superior in terms of controllability of crystallization to allow for the fabrication of low loss glass-ceramic fibers. When irradiated using a 1030 nm femtosecond laser, an enhanced green emission at a wavelength of 515 nm is observed in the glass-ceramic fiber, which demonstrates second harmonic generation of a laser action in the fabricated glass-ceramic fibers. Therefore, this new glass-ceramic fiber not only provides a highly promising development for frequency conversion of lasers in all optical fiber based networks, but the melt-in-tube fabrication method also offers excellent opportunities for fabricating a wide range of novel glass-ceramic optical fibers for multiple future applications including fiber telecommunications and lasers.

Donor-Acceptor Control in Grown-in-Glass Gallium Oxide Nanocrystals by Crystallization-driven Heterovalent Doping

Incorporation of doping ions in nanocrystals is a strategy for providing nanophases with functions directly related to ion features. At the nanoscale, however, doping can also activate more complex effects mediated by perturbation of the nanophase size and structure. Here, we report a paradigmatic case in which we modify grown-in-glass γ-Ga₂ O₃ nanophases by nickel or titanium doping of the starting glass, so as to control the concentration of oxygen and gallium vacancies responsible for the light emission. Optical absorption and luminescence show that Ni²⁺ and Ti⁴⁺ ions enter into the nanophase, but differential scanning calorimetry and X-ray diffraction indicate that Ni and Ti also work as modifiers of nanocrystal growth. As a result, doping influences nanocrystal size and concentration, which in turn dictate the number of donors and acceptors per nanocrystal. Finally, the chain of effects turns out to control both the intensity and spectral distribution of the light emission.

Efficient Upconverting Multiferroic Core@Shell Photocatalysts: Visible-to-Near-Infrared Photon Harvesting

We report the two-step synthesis of a core@shell nanohybrid material for visible-to-near-infrared (NIR) photocatalysis. The core is constituted of NaGdF₄:Er³⁺, Yb³⁺ upconverting nanoparticles (UCNPs). A bismuth ferrite (BFO) shell is assembled around the UCNPs via a hydrothermal process. The photocatalytic degradation assays of methylene orange and 4-chlorophenol reveal that these core@shell nanostructures possess remarkably enhanced reaction activity under visible and NIR irradiation, compared to the BFO powder alone and the BFO-UCNP mixture. Photo-charge scavenger tests and fluorescent assays indicate that hydroxyl radicals play a pivotal role in the photodegradation mechanism. The enhanced photoactivity of the core@shell structure is attributed to the NIR radiation which is converted into visible light by UCNPs, and which is then captured by BFO via a nonradiative luminescence resonance energy transfer process. Therefore, this core@shell architecture optimizes solar energy use by efficiently harvesting visible and NIR photons.

Upconversion Nanocrystals Mediated Lateral-Flow Nanoplatform for in Vitro Detection

Upconversion phosphors (UCPs) that are free from interference from biological sample autofluorescence have attracted attention for in vivo and in vitro bioapplications. However, UCPs need to be water-dispersible, nanosized, and highly luminous to realize broad applications. Therefore, the aim of this research is to develop UCPs that meet these comprehensive criteria for in vitro diagnosis. To combine nano size with high luminous intensity, β-NaYF₄:Yb³⁺,Er³⁺ upconversion nanocrystals (UCNPs) codoped with Li⁺ and K⁺ are prepared that display high upconversion intensities as well as small size. The strongest green and red emissions of the Na_0.9Li_0.07K_0.03YF₄:Yb³⁺,Er³⁺ nanocrystals are increased by 7 and 10 times, respectively, compared with those of the undoped NaYF₄:Yb³⁺,Er³⁺ nanocrystals. A mild sol-gel surface modification method is used to produce water-phase dispersions and allow covalent biomolecule conjugation. The bioactivated UCNPs are used as a bioreporter and integrated with a classical lateral flow assay to establish an assay to accomplish simultaneous dual-target detection of Yersinia pestis and Burkholderia pseudomallei. The assay achieves a sensitivity of 10³ CFU/test without cross-interference between two targets. The research provides a way to produce UCNPs with comprehensive properties for use as excellent optical reporters in in vivo and in vitro bioapplications.

Amorphous porphyrin glasses exhibit near-infrared excimer luminescence

The amorphous nature of a series of zinc–porphyrins bearing two 3,4,5-tri((S)-3,7-dimethyloctyloxy)phenyl groups at the meso-positions, named “porphyrin glass”, were tolerant of π-conjugation engineering in ethynylene-linked dimers.

Highly Sensitive Dual-Phase Nanoglass-Ceramics Self-Calibrated Optical Thermometer

A strategy to achieve high sensitivity of noncontact optical thermometer via the structure design of nanoglass-ceramic and the usage of Ln(3+) (Ln = Eu, Tb, Dy) luminescence as reference signal and Cr(3+) emission as temperature signal was provided. Specifically, the synthesized dual-phase glass-ceramics were evidenced to enable spatially confined doping of Ln(3+) in the hexagonal GdF3 nanocrystals and Cr(3+) in the cubic Ga2O3 nanoparticles, being beneficial to suppressing detrimental energy transfer between Ln(3+) and Cr(3+) and thus significantly enhancing their luminescence. As a consequence, completely different temperature-sensitive luminescence of Ln(3+)4f → 4f transition and Cr(3+) 3d → 3d transition in the present glass-ceramic resulted in obvious variation of Cr(3+)/Ln(3+) fluorescence intensity ratio with temperature and strikingly high detecting temperature sensitivity of 15-22% per K. We believe that this preliminary study will provide an important advance in exploring other innovative optical thermometry.

Simultaneous quasi-one-dimensional propagation and tuning of upconversion luminescence through waveguide effect

Luminescence-based waveguide is widely investigated as a promising alternative to conquer the difficulties of efficiently coupling light into a waveguide. But applications have been still limited due to employing blue or ultraviolet light as excitation source with the lower penetration depth leading to a weak guided light. Here, we show a quasi-one-dimensional propagation of luminescence and then resulting in a strong luminescence output from the top end of a single NaYF₄:Yb³⁺/Er³⁺ microtube under near infrared light excitation. The mechanism of upconversion propagation, based on the optical waveguide effect accompanied with energy migration, is proposed. The efficiency of luminescence output is highly dependent on the concentration of dopant ions, excitation power, morphology, and crystallinity of tube as an indirect evidence of the existence of the optical actived waveguide effect. These findings provide the possibility for the construction of upconversion fiber laser.

Dual-Phase Glass Ceramic: Structure, Dual-Modal Luminescence, and Temperature Sensing Behaviors

Yb(3+)/Er(3+)/Cr(3+) triply doped transparent bulk glass ceramic containing orthorhombic YF3 and cubic Ga2O3 nanocrystals was fabricated by a melt-quenching route to explore its possible application in optical thermometry with high spatial and temperature resolution. It was experimentally observed that Yb(3+)/Er(3+) ions incorporated into the precipitated YF3 nanophase, while Cr(3+) ions partitioned into the crystallized Ga2O3 nanophase after glass crystallization. Importantly, such spatial isolation strategy efficiently suppressed adverse energy transfer among different active ions. As a consequence, intense green anti-Stokes luminescence originated from Er(3+): (2)H11/2,(4)S3/2 → (4)I15/2 transitions, and deep-red Stokes luminescence transitions assigned to Cr(3+): (2)E → (4)A2 radiation were simultaneously realized. Impressively, the intermediate crystal-field environment for Cr(3+) in Ga2O3 made it possible for lifetime-based temperature sensing owing to the competition of radiation transitions from the thermally coupled Cr(3+) (2)E and (4)T2 excited states. In the meantime, the low-phonon-energy environment for Er(3+) in YF3 was beneficial for upconversion fluorescence intensity ratio-based temperature sensing via thermal population between the (2)H11/2 state and (4)S3/2 state. The Boltzmann distribution theory and the two-level kinetic model were adopted to interpret these temperature-dependent luminescence of Er(3+) and Cr(3+), respectively, which gave the highest temperature sensitivities of 0.25% K(-1) at 514 K for Er(3+) and 0.59% K(-1) at 386 K for Cr(3+).

Diffusion-driven and size-dependent phase changes of gallium oxide nanocrystals in a glassy host

Phase transformations at the nanoscale represent a challenging field of research, mainly in the case of nanocrystals (NCs) in a solid host, with size-effects and interactions with the matrix. Here we report the study of the structural evolution of γ-Ga2O3 NCs in alkali-germanosilicate glass - a technologically relevant system for its light emission and UV-to-visible conversion - showing an evolution drastically different from the expected transformation of γ-Ga2O3 into β-Ga2O3. Differential scanning calorimetry registers an irreversible endothermic process at ∼1300 K, well above the exothermic peak of γ-Ga2O3 nano-crystallization (∼960 K) and below the melting temperature (∼1620 K). Transmission electron microscopy and X-ray diffraction data clarify that glass-embedded γ-Ga2O3 NCs transform into LiGa5O8via diffusion-driven kinetics of Li incorporation into NCs. At the endothermic peak, β-Ga2O3 forms from LiGa5O8 dissociation, following a nucleation-limited kinetics promoted by size-dependent order-disorder change between LiGa5O8 polymorphs. As a result of the changes, modifications of UV-excited NC light emission are registered, with potential interest for applications.

Topological engineering of glass for modulating chemical state of dopants

A novel approach to modulating the chemical state of dopants by engineering the topological features of a glass matrix is presented. The method allows selective stabilization of dopants on a wide range of length scales, from dispersed ions to aggregated clusters to nanoparticles, leading to various intriguing optical phenomena, such as great emission enhancement and ultra-broadband optical amplification.

Self-assembled metastable γ-Ga2O3 nanoflowers with hexagonal nanopetals for solar-blind photodetection

Metastable γ-Ga2O3 nanoflowers assembled from hexagonal nanopetals are successfully constructed by the oxidation of metallic Ga in acetone solution. The nanoflowers with a hollow interior structure exhibit a short response time and a large light-current-dark-current ratio under a relatively low bias voltage, suggesting an especially important potential application in solar-blind photodetection.

Control of the radiative properties via photon-plasmon interaction in Er3+ -Tm3+ -codoped tellurite glasses in the near infrared region

The novelty of this paper is that it reports on the tuning of the spectral properties of Er3+ -Tm3+ ions in tellurite glasses in the near-infrared region through the incorporation of silver or gold nanoparticles. These noble metal nanoparticles can improve the emission intensity and expand the bandwidth of the luminescence spectrum centered at 1535 nm, covering practically all the optical telecommunication bands (S, C + L and U), and extended up to 2010 nm wavelength under excitation by a 976 nm laser diode. Both effects are obtained by the combined emission of Er3+ and Tm3+ ions due to efficient energy transfer processes promoted by the presence of silver or gold nanoparticles for the (Er3+)4I(11/2)→(Tm3+)3H5, (Er3+)4I(13/2)→(Tm3+)3H4 and (Er3+)4I(13/2)→(Tm3+)3F4 transitions. The interactions between the electronic transitions of Er3+ and Tm3+ ions that provide a tunable emission are associated with the dynamic coupling mechanism described by the variations generated by the Hamiltonian H DC in either the oscillator strength or the local crystal field, i.e. the line shape changes in the near-infrared emission band. The Hamiltonian is expressed as eigenmodes associated with the density of the conduction electron generated by the different nanoparticles through its collective free oscillations at each resonance frequency of the nanoparticle and their geometric dependence. A complete description of photon-plasmon interactions of noble metal nanoparticles with the Er3+ and Tm3+ ions is provided.

Synthesis of lanthanide-doped NaYF₄@TiO₂ core-shell composites with highly crystalline and tunable TiO₂ shells under mild conditions and their upconversion-based photocatalysis

NaYF4:Yb,Tm@TiO₂ core-shell composites were synthesized via a facile hydrothermal method. The highly crystalline TiO₂ shell can be uniformly coated onto lanthanide-doped NaYF₄ microrods and nanorods under mild conditions without calcination. The thickness of the TiO₂ shell can be tuned by varying the ratio of fluoride rods and Ti precursors. The microcomposite with a moderate TiO₂ shell shows excellent photocatalytic activity under near-infrared irradiation.

Broadband infrared light-emitting patterns in optical glass by laser-induced nanostructuring of NiO-doped alkali-gallium germanosilicates

In this Letter, we show functionalization of NiO-doped 7.5Li(2)O·2.5Na(2)O·20Ga(2)O(3)·35SiO(2)·35GeO(2) glass by space-selective nanocrystallization via exposure to the focused beam of a pulsed copper vapor laser (510.6 and 578.2 nm) at temperature close to the glass transition point (570°C). Irradiated areas drastically change their color, caused by electronic transitions of Ni(2+) dopant ions, without any alteration of the optical quality. Importantly, irradiated regions acquire broadband infrared luminescence (centered at about 1400 nm and possessing 400 nm effective bandwidth) typical of Ni(2+) ions in crystalline environment, and by positive change of refractive index (more than 10(-3)). Spectroscopic and diffractometric data of the irradiated regions indeed resemble those previously observed in thermally nanocrystallized glass, with Ni(2+) ions embedded in γ-Ga(2)O(3) nanocrystals. The results demonstrate the possibility of laser writing nanocrystallized multifunction patterns in germanosilicate glasses for the fabrication of active integrated devices.

Native amorphous nanoheterogeneity in gallium germanosilicates as a tool for driving Ga2O3 nanocrystal formation in glass for optical devices

Nanoparticles in amorphous oxides are a powerful tool for embedding a wide range of functions in optical glasses, which are still the best solutions in several applications in the ever growing field of photonics. However, the control of the nanoparticle size inside the host material is often a challenging task, even more challenging when detrimental effects on light transmittance have to be avoided. Here we show how the process of phase separation and subsequent nanocrystallization of a Ga-oxide phase can be controlled in germanosilicates - prototypal systems in optical telecommunications - starting from a Ga-modified glass composition designed to favour uniform liquid-liquid phase separation in the melt. Small angle neutron scattering data demonstrate that nanosized structuring occurs in the amorphous as-quenched glass and gives rise to initially smaller nanoparticles, by heating, as in a secondary phase separation. By further heating, the nanophase evolves with an increase of nanoparticle gyration radius, from a few nm to a saturation value of about 10 nm, through an initial growing process followed by an Ostwald ripening mechanism. Nanoparticles finally crystallize, as indicated by transmission electron microscopy and X-ray diffraction, as γ-Ga(2)O(3)- a metastable gallium oxide polymorph. Infrared reflectance and photoluminescence, together with the optical absorption of Ni ions used as a probe, give an indication of the underlying interrelated processes of the structural change in the glass and in the segregated phase. As a result, our data give for the first time a rationale for designing Ga-modified germanosilicates at the nanoscale, with the perspective of a detailed nanostructuring control.

Enhanced emission of ultra-small-sized LaF3:RE3+ (RE = Eu, Tb) nanoparticles through 1,2,4,5-benzenetetracarboxylic acid sensitization

Uniform, ultra-small-sized and well-water-dispersible LaF(3) nanoparticles doped with trivalent rare earth (RE) ions (Eu(3+) or Tb(3+)) have been synthesized by a simple, low temperature synthesis route. The nanoparticles, with sizes of about 3.2 nm (for those doped with Eu(3+)) and 3.0 nm (for those doped with Tb(3+)), are roughly spherical and monodisperse. 1,2,4,5-Benzenetetracarboxylic acid (labeled as BA) as sensitizer has been bonded to the surface of the nanoparticles, which can sensitize the emission of RE(3+) in the LaF(3) nanoparticles. The BA-LaF(3):RE(3+) (RE = Eu or Tb) nanoparticles have a broad absorption band in the UV domain, and show enhanced luminescence of RE(3+) based on an energy transfer from BA ligands to RE(3+) ions (i.e. the so-called "antenna effect"). Due to the dual protection of organic ligands (BA) and inorganic matrices (LaF(3)), BA-LaF(3):RE(3+) (RE = Eu or Tb) nanoparticles have longer excited state lifetimes than LaF(3):RE(3+) (RE = Eu or Tb) nanoparticles as well as lanthanide coordination polymers of BA.

Bandwidth broadening of near-infrared emission through nanocrystallization in Bi/Ni co-doped glass

We demonstrated an effective way to broaden the bandwidth of near-infrared (NIR) emission from Bi/Ni codoped 58SiO₂₋21ZnO-13Al₂₋O₃₋5TiO₂₋3Ga₂O₃ glass through nanocrystallization. The nanocrystallized glass shows ultra-wide NIR luminescence with a full width at half maximum (FWHM) of 350 nm and long lifetime up to 476 µs. The observed broadband NIR emission, attributed to energy transfer suppression between Ni and Bi active centers, was realized by a separation process with Ni²⁺ ions selectively incorporated into nanocrystals. This bandwidth engineering through nanocrystallization inside glass suggests a promising approach for enhancement of glass functionality and construction of broadband light sources.

Temperature dependence and quantum efficiency of ultrabroad NIR photoluminescence from Ni2+ centers in nanocrystalline Ba-Al titanate glass ceramics

Ultrabroad near-infrared (NIR) photoluminescence from Ni2+-centers in nanocrystalline Ba-Al titanate glass ceramics was studied by temperature-dependent static and dynamic photoluminescence spectroscopy in the regime of 10 to 300 K. Photoluminescence covers the spectral range of about 1100 nm to >1600 nm with a typical bandwidth (FWHM) greater than 300 nm. For UV-LED excitation at 352 nm, an internal quantum efficiency of 65% is obtained. The excited state lifetime τ at room temperature is 39 μs. The stimulated emission cross section σ(em) is 8.5×10(-20) cm2, resulting in a practical figure of merit, σ(em) * τ, of 3.3×10(-24) cm2 s at room temperature. These properties suggest suitability as a broadband gain medium for tunable lasers and optical amplifiers.

Three-dimensional temperature distribution and modification mechanism in glass during ultrafast laser irradiation at high repetition rates

We experimentally determined the three-dimensional temperature distribution and modification mechanism in a soda-lime-silicate glass under irradiation of ultrafast laser pulses at high repetition rates by analyzing the relationship between the morphology of the modification and ambient temperature. In contrast to previous studies, we consider the temperature dependence of thermophysical properties and the nonlinear effect on the absorbed energy distribution along the beam propagation axis in carrying out analyses. The optical absorptivity evaluated with the temperature distribution is approximately 80% and at most 3.5% smaller than that evaluated by the transmission loss measurement. The temperature distribution and the strain distribution indicate that visco-elastic deformation and material flow play important roles in the laser-induced modification inside a glass.

Formation mechanism of element distribution in glass under femtosecond laser irradiation

We report on the formation mechanism of element distribution in glass under high-repetition-rate femtosecond laser irradiation. We simultaneously focused two beams of femtosecond laser pulses inside a glass and confirmed the formation of characteristically shaped element distributions. The results of the numerical simulation in which we considered concentration- and temperature-gradient-driven diffusions were in excellent qualitative agreement with the experimental results, indicating that the main driving force is the sharp temperature gradient. Since the composition of a glass affects its refractive index, absorption, and luminescence property, the results in this study provide a framework to fabricate a functional optical device such as optical circuits with a high-repetition-rate femtosecond laser.