Photoreduction of 99Tc Pertechnetate by Nanometer-Sized Metal Oxides: New Strategies for Formation and Sequestration of Low-Valent Technetium

Uranyl-Tc(VII)/Tc(V) hybrid clusters

Pertechnetate (99TcVIIO4-), reduced Tc, and actinides co-exist in spent nuclear fuel and legacy wastes. They co-transport in fuel reprocessing and waste disposal scenarios, necessitating an understanding of co-speciation. Here, we report five new molecular cluster/framework structures with pentameric and tetrameric uranyl building units decorated by TcO4-/ReO4- oxoanions, or fused with the reduced technetyl cation Tc(V)O. The latter, obtained by Tc auto-reduction (without the intentional introduction of a reducing environment), broadens the basis for Tc-reduction and the burgeoning polyoxometalate-like behavior of technetium.

Functional Carbon Capsules Supporting Ruthenium Nanoclusters for Efficient Electrocatalytic 99 TcO4 - /ReO4 - Removal from Acidic and Alkaline Nuclear Wastes

The selective removal of the β-emitting pertechnetate ion (99 TcO4 - ) from nuclear waste streams is technically challenging. Herein, a practical approach is proposed for the selective removal of 99 TcO4 - (or its surrogate ReO4 - ) under extreme conditions of high acidity, alkalinity, ionic strength, and radiation field. Hollow porous N-doped carbon capsules loaded with ruthenium clusters (Ru@HNCC) are first prepared, then modified with a cationic polymeric network (R) containing imidazolium-N+ units (Ru@HNCC-R) for selective 99 TcO4 - and ReO4 - binding. The Ru@HNCC-R capsules offer high binding affinities for 99 TcO4 - /ReO4 - under wide-ranging conditions. An electrochemical redox process then transforms adsorbed ReO4 - to bulk ReO3 , delivering record-high removal capacities, fast kinetics, and excellent long-term durability for removing ReO4 - (as a proxy for 99 TcO4 - ) in a 3 m HNO3 , simulated nuclear waste-Hanford melter recycle stream and an alkaline high-level waste stream (HLW) at the U.S. Savannah River Site (SRS). In situ Raman and X-ray absorption spectroscopy (XAS) analyses showed that adsorbed Re(VII) is electrocatalytically reduced on Ru sites to a Re(IV)O2 intermediate, which can then be re-oxidized to insoluble Re(VI)O3 for facile collection. This approach overcomes many of the challenges associated with the selective separation and removal of 99 TcO4 - /ReO4 - under extreme conditions, offering new vistas for nuclear waste management and environmental remediation.

Superiority of the Supramolecular Halogen Bond Receptor over Its H-Bond Analogue toward the Efficient Extraction of Perrhenate from Water

A halogen bond-based water-soluble tetrapodal iodoimidazolium receptor, (L-I)(4Br), exhibited a high degree of efficiency (∼96%) in extracting ReO₄^- from 100% aqueous medium within a wide range of concentrations and of pH values along with excellent reusability. The solid-state X-ray diffraction study showed the trapping of ReO₄^- by (L-I)(4Br) via the Re-O····I halogen bonding interaction. XPS studies also suggested the interaction between I and ReO₄^- through polarization of the electron density of I atoms by ReO₄^-. (L-I)(4Br) is found to be capable of retaining its high extraction efficiency in the presence of competing anions such as F^-, Cl^-, I^-, SO₄^2-, H₂PO₄^-, CO₃^2-, NO₃^-, BF₄^-, ClO₄^-, Cr₂O₇^2-, and a mixture of these anions. Interestingly, (L-I)(4Br) was found to be superior in ReO₄^- extraction as compared to its hydrogen-bond donor analogue, (L-H)(4Br), as confirmed by a series of control experiments and theoretical calculations. Our synthesized dipodal and tripodal halogen bond donor receptors and their H-analogues validated the superiority of these classes of supramolecular halogen bond donor receptors over their hydrogen-bond analogues. (L-I)(4Br) also showed superior practical applicability in terms of the removal of ReO₄^- at anion concentrations as low as ∼100 ppm, which was a major shortcoming of (L-H)(4Br).

Radiometallation and photo-triggered release of ready-to-inject radiopharmaceuticals from the solid phase

The efficient, large-scale synthesis of radiometallated radiopharmaceuticals represents an emerging clinical need which, to date, is inherently limited by time consuming, sequential procedures to conduct isotope separation, radiochemical labeling and purification prior to formulation for injection into the patient. In this work, we demonstrate that a solid-phase based, concerted separation and radiosynthesis strategy followed by photochemical release of radiotracer in biocompatible solvents can be employed to prepare ready-to-inject, clinical grade radiopharmaceuticals. Optimization of resin base, resin loading, and radiochemical labeling capacity are demonstrated with ⁶⁷Ga and ⁶⁴Cu radioisotopes using a short model peptide sequence and further validated using two peptide-based radiopharmaceuticals with clinical relevance, targeting the gastrin-releasing peptide and the prostate specific membrane antigen. We also demonstrate that the solid-phase approach enables separation of non-radioactive carrier ions Zn²⁺ and Ni²⁺ present at 10⁵-fold excess over ⁶⁷Ga and ⁶⁴Cu by taking advantage of the superior Ga³⁺ and Cu²⁺ binding affinity of the solid-phase appended, chelator-functionalized peptide. Finally, a proof of concept radiolabeling and subsequent preclinical PET-CT study with the clinically employed positron emitter ⁶⁸Ga successfully exemplifies that Solid Phase Radiometallation Photorelease (SPRP) allows the streamlined preparation of radiometallated radiopharmaceuticals by concerted, selective radiometal ion capture, radiolabeling and photorelease.

Strengthened erosion resistance of compacted bentonite by layered double hydroxide: A new electrostatic interaction-based approach

For the geological repository of high-level radioactive waste (HLW) built in granitic host rock，the control of buffer material (compacted bentonite) erosion and subsequent loss caused by groundwater in granite fissures is an unresolved problem of major concern. We propose here new insight into enhancing the erosion resistance of compacted bentonite by means of its electrostatic interaction with oppositely-charged layered double hydroxide (LDH). The interaction between bentonite and LDH was studied by dropwise addition of colloidal LDH into colloidal bentonite suspension, during which the variation in electrical conductivity, zeta potential and particle size proved a strong interaction between these two materials. Interestingly, in addition to their aggregation, intercalated structures of LDH and montmorillonite were found in the composite (BEN@LDH) by a combined characterization of X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM), and were confirmed by density functional theory (DFT) calculation. Colloid generation of compacted BEN@LDH under ultrasonic conditions is negligible comparing with that of compacted bentonite, indicating a significantly higher erosion resistance. Besides, a small amount of LDH by mechanically mixing with bentonite (mass ratio 1:99) can also effectively improve the erosion resistance of compacted bentonite. Moreover, BEN@LDH displayed stronger retention performance towards U(VI) and Se(IV) than bentonite under near-neutral/weakly alkaline conditions. Our results indicate that LDH is a promising additive in compacted bentonite, and this approach may be extended to common geotechnical structures built with clays and soils.

Constructing Cationic Metal-Organic Framework Materials Based on Pyrimidyl as a Functional Group for Perrhenate/Pertechnetate Sorption

Cationic metal-organic framework (MOF) materials are widely used in the anion separation field, but there are few reports of pyrimidyl ligands as building units. In this work, three new cationic MOFs based on pyrimidyl as functional group ligands were synthesized for the removal of radioactive pertechnetate from aqueous solution. The pyrimidyl ligands were designed by incorporating pyrimidyl units into the skeletons of benzene, triphenylamine, and tetraphenylethylene, respectively. Taking advantage of multiple coordination sites of pyrimidyl groups, three cationic MOFs (ZJU-X11, ZJU-X12, and ZJU-X13) with diverse structures were solvothermally synthesized using silver ion as the metal node. Scanning electron microscopy-energy-dispersive spectroscopy mapping demonstrated that these three cationic MOFs could capture ReO₄^- via anion exchange, but the sorption capabilities were distinctly different. With 95% removal toward ReO₄^-, ZJU-X11 showed the strongest anion-exchange competence among the three MOFs. According to the results of batch experiments, ZJU-X11 could achieve sorption equilibrium within 10 min, remove 518 mg of ReO₄^- per 1 g of ZJU-X11, remove most of ReO₄^- after four recycles, and maintain satisfactory selectivity in the presence of excess competing anions, which is one of the best MOF materials for removing ReO₄^-/TcO₄^- among the three cationic MOFs. This work indicates that the pyrimidyl group is a promising multiple site to build versatile cationic MOFs.

Superiority of a polymeric scavenger over its hexapodal monomer towards efficient ReO4- removal in water

A new imidazolium functionalized hexapodal polymeric receptor, [PHIm-Br], showed selective and efficient removal (>99%) of perrhenate (ReO4-), from 100% aqueous medium via solid-liquid extraction, which was 13% higher as compared to its monomeric analouge [HIm-Br]. Most importantly, [PHIm-Br] overcomes the drawback of [HIm-Br] in terms of removal of ReO4- at lower anion concentration of ∼100 ppm along with excellent radiation resistivity and reusability within a wide pH range, which implies its potential towards practical applications.

Evaluation of an Imidazolium-Based Porous Organic Polymer as Radioactive Waste Scavenger

⁹⁹TcO₄^- is highly radioactive and hazardous to both the environment and public health, meanwhile, it is quite challenging to have it efficiently removed. Herein an imidazolium-based cationic porous polymer (ImPOP-1) is evaluated for removal of TcO₄^-, with nonradioactive ReO₄^- as the surrogate for experimental operation. It is demonstrated that ImPOP-1 is a rare example that can integrate high adsorption capacity (610 mg g^-1), fast kinetics (93.3% in 30 s), and high selectivity (72.9% in 1000 times excess of SO₄^2- ions) in one material. The distribution coefficient K_d is among the top up to 3.2 × 10⁵ mL g^-1. ImPOP-1 also displays high adsorption performance over a wide range of pH values, and removal efficiency up to 64.3% in a highly alkaline solution (3 M NaOH). Recyclability experiments demonstrate that ImPOP-1 can be reused at least four times. The ImPOP-1 also retains a consistent adsorption capacity up to 609 ± 6.1 mg g^-1 between three different batches of samples. In addition, a real-scenario experiment shows that ImPOP-1 can remove 97.4% of ReO₄^- in a simulated Hanford LAW stream.

Selective and efficient removal of perrhenate by an imidazolium based hexapodal receptor in water medium

This work reports a new cationic imidazolium based hexapodal receptor, [L.6Br], for selective and efficient removal of perrhenate (ReO₄⁻) as [L.6ReO4] from 100% aqueous medium via extraction through precipitation.

Efficient Photocatalytic Reduction of Aqueous Perrhenate and Pertechnetate

The pertechnetate anion (⁹⁹TcO₄^-) is a long-lived radioactive species that is soluble in aqueous solution, in contrast to sparingly soluble ⁹⁹TcO₂. Results are reported for photocatalytic reduction and removal of perrhenate (ReO₄^-), a nonradioactive surrogate for ⁹⁹TcO₄^-, using a TiO₂ (P25) nanoparticle suspension in formic acid under UV-visible irradiation. Re(VII) removal up to 98% was achieved at pH = 3 under air or N₂. The proposed mechanism is Re(VII)/Re(IV) reduction mediated by reducing radicals (^·CO₂^-) from oxidation of formic acid, not direct reduction by photogenerated electrons of TiO₂. Recycling results indicate that photocatalytic reduction of ReO₄^- exhibits excellent regeneration and high activity with >95% removal even after five cycles. ⁹⁹Tc(VII) is more easily reduced than Re(VII) in the presence of NO₃^- with very slow redissolution of reduced ⁹⁹Tc. This study presents a novel method for the removal of ReO₄^-/⁹⁹TcO₄^- from aqueous solution, with potential application for deep geological disposal.

Effective Removal of Anionic Re(VII) by Surface-Modified Ti2CT x MXene Nanocomposites: Implications for Tc(VII) Sequestration

Environmental contamination by ⁹⁹Tc(VII) from radioactive wastewater streams is of particular concern due to the long half-life of ⁹⁹Tc and high mobility of pertechnetate. Herein, we report a novel MXene-polyelectrolyte nanocomposite with three-dimensional networks for enhanced removal of perrhenate, which is pertechnetate simulant. The introduction of poly(diallyldimethylammonium chloride) (PDDA) regulates the surface charge and improves the stability of Ti₂CT _x nanosheet, resulting in Re(VII) removal capacity of up to 363 mg g^-1, and fast sorption kinetics. The Ti₂CT _x/PDDA nanocomposite furthermore exhibits good selectivity for ReO₄^- when competing anions (such as Cl^- and SO₄^2-) coexist at a concentration of 1800 times. The immobilization mechanism was confirmed as a sorption-reduction process by batch sorption experiments and X-ray photoelectron spectroscopy. The pH-dependent reducing activity of Ti₂CT _x/PDDA nanocomposite toward Re(VII) was clarified by X-ray absorption spectroscopy. As the pH increases, the local environment gradually changes from octahedral-coordinated Re(IV) to tetrahedral-coordinated Re(VII). The overall results suggest that Ti₂CT _x/PDDA nanocomposite may be a promising candidate for efficient elimination of Tc contamination. The reported surface modification strategy might result in applications of MXene-based materials in environmental remediation of other oxidized anion pollutants.

Reductive immobilization of pertechnetate in soil and groundwater using synthetic pyrite nanoparticles

Radioactive technetium (⁹⁹Tc) is of intense concern because of its toxicity and high mobility in the environment. Reduction of Tc(VII) to Tc(IV) decreases the mobility and availability of technetium in soil and groundwater. In this study, pyrite nanoparticles (FeS₂) were synthesized, characterized and tested for immobilizing/removing ⁹⁹Tc(VII) in soil and groundwater through batch and column experiments. Influences of particle dosage, dissolved organic matter (DOM), and pH on the reductive immobilization kinetics were examined. At a dosage of 0.28 g/L as Fe, the pyrite nanoparticles were able to rapidly and completely remove 4.88 × 10^-7 M of Tc(VII) by converting it to insoluble Tc(IV), with a retarded first-order rate constant of 0.30 h^-1. The presence of high concentrations of DOM only moderately inhibited the reduction effectiveness, and acidic pH was more favorable for Tc(VII) reduction. Column experiments showed that embedding a 0.8 cm pyrite layer of the material in a soil bed, simulating a permeable reactive barrier, was able to retard technetium transport 710 times more than a model sandy soil. The results demonstrated that the pyrite particles may serve as a long-lasting reactive material to remediate Tc-contaminated soil, groundwater and solid wastes.

Aqueous (99)Tc, (129)I and (137)Cs removal from contaminated groundwater and sediments using highly effective low-cost sorbents

Technetium-99 ((99)Tc), iodine-129 ((129)I), and cesium-137 ((137)Cs) are among the key risk-drivers for environmental cleanup. Immobilizing these radionuclides, especially TcO4(-) and I(-), has been challenging. TcO4(-) and I(-) bind very weakly to most sediments, such that distribution coefficients (Kd values; radionuclide concentration ratio of solids to liquids) are typically <2 mL/g; while Cs sorbs somewhat more strongly (Kd ∼ 50 mL/g). The objective of this laboratory study was to evaluate 13 cost-effective sorbents for TcO4(-), I(-), and Cs(+) uptake from contaminated groundwater and sediments. Two organoclays sorbed large amounts of TcO4(-) (Kd > 1 × 10(5) mL/g), I(-) (Kd ≥ 1 × 10(4) mL/g), and Cs(+) (Kd > 1 × 10(3) mL/g) and also demonstrated a largely irreversible binding of the radionuclides. Activated carbon GAC 830 was effective at sorbing TcO4(-) (Kd > 1 × 10(5) mL/g) and I(-) (Kd = 6.9 × 10(3) mL/g), while a surfactant modified chabazite was effective at sorbing TcO4(-) (Kd > 2.5 × 10(4) mL/g) and Cs(+) (Kd > 6.5 × 10(3) mL/g). Several sorbents were effective for only one radionuclide, e.g., modified zeolite Y had TcO4(-)Kd > 2.3 × 10(5) mL/g, AgS had I(-) Kd = 2.5 × 10(4) mL/g, and illite, chabazite, surfactant modified clinoptilolite, and thiol-SAMMS had Cs(+)Kd > 10(3) mL/g. These low-cost and high capacity sorbents may provide a sustainable solution for environmental remediation.

Biennial review of planar chromatography: 2011–2013

The most important advances in planar chromatography published between November 1, 2011 and November 1, 2013 are reviewed in this paper. Included are an introduction to the current status of the field; student experiments, books, and reviews; theory and fundamental studies; apparatus and techniques for sample preparation and TLC separations (sample application and plate development with the mobile phase); detection and identification of separated zones (chemical and biological detection, TLC/mass spectrometry, and TLC coupled with other spectrometric methods); techniques and instruments for quantitative analysis; preparative layer chromatography; and thin layer radiochromatography. Numerous applications to a great number of compound types and sample matrices are presented in all sections of the review.

99Tc and Re incorporated into metal oxide polyoxometalates: oxidation state stability elucidated by electrochemistry and theory

The radioactive element technetium-99 ((99)Tc, half-life = 2.1 × 10(5) years, β(-) of 253 keV), is a major byproduct of (235)U fission in the nuclear fuel cycle. (99)Tc is also found in radioactive waste tanks and in the environment at National Lab sites and fuel reprocessing centers. Separation and storage of the long-lived (99)Tc in an appropriate and stable waste-form is an important issue that needs to be addressed. Considering metal oxide solid-state materials as potential storage matrixes for Tc, we are examining the redox speciation of Tc on the molecular level using polyoxometalates (POMs) as models. In this study we investigate the electrochemistry of Tc complexes of the monovacant Wells-Dawson isomers, α(1)-P(2)W(17)O(61)(10-) (α1) and α(2)-P(2)W(17)O(61)(10-) (α2) to identify features of metal oxide materials that can stabilize the immobile Tc(IV) oxidation state accessed from the synthesized Tc(V)O species and to interrogate other possible oxidation states available to Tc within these materials. The experimental results are consistent with density functional theory (DFT) calculations. Electrochemistry of K(7-n)H(n)[Tc(V)O(α(1)-P(2)W(17)O(61))] (Tc(V)O-α1), K(7-n)H(n)[Tc(V)O(α(2)-P(2)W(17)O(61))] (Tc(V)O-α2) and their rhenium analogues as a function of pH show that the Tc-containing derivatives are always more readily reduced than their Re analogues. Both Tc and Re are reduced more readily in the lacunary α1 site as compared to the α2 site. The DFT calculations elucidate that the highest oxidation state attainable for Re is VII while, under the same electrochemistry conditions, the highest oxidation state for Tc is VI. The M(V)→ M(IV) reduction processes for Tc(V)O-α1 are not pH dependent or only slightly pH dependent suggesting that protonation does not accompany reduction of this species unlike the M(V)O-α2 (M = (99)Tc, Re) and Re(V)O-α1 where M(V/IV) reduction process must occur hand in hand with protonation of the terminal M═O to make the π*(M═O) orbitals accessible to the addition of electrons. This result is consistent with previous extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) data that reveal that the Tc(V) is "pulled" into the -α1 framework and that may facilitate the reduction of Tc(V)O-α1 and stabilize lower Tc oxidation states. This study highlights the inequivalency of the two sites, and their impact on the chemical properties of the Tc substituted in these positions.