Two-Electron Redox Chemistry at the Dinuclear Core of a TePt Platform: Chlorine Photoreductive Elimination and Isolation of a TeVPtI Complex

Antimony centre in three different roles: does donor strength or acceptor ability determine the bonding pattern?

A set of antimony(III) compounds containing a ligand (Ar) with a pendant guanidine function (where Ar = 2-[(Me2N)2CN]C6H4) was prepared and characterized. This includes triorgano-Ar3Sb, diorgano-Ar2SbCl and monoorgano-ArSbCl2 compounds and they were characterized by 1H and 13C NMR spectroscopy and by single-crystal X-ray diffraction analysis (sc-XRD). The coordination capability of Ar3Sb and Ar2SbCl was examined in the reactions with either cis-[PdCl2(CH3CN)2] or PtCl2 and complexes cis-[(κ2-Sb,N-Ar3Sb)MCl2] (M = Pd 1, Pt 2) and [(κ3-N,Sb,N-Ar2SbCl)MCl2] (M = Pd 3, Pt 4) were isolated, while their structures were determined by sc-XRD. Notably, the ligands Ar3Sb and Ar2SbCl exhibit different coordination modes - bidentate and tridentate, respectively - and the antimony exhibits three distinct bonding modes in complexes 1-4, which were also subjected to theoretical studies.

Cationic ligands - from monodentate to pincer systems

For a long time, the small group of cationic ligands stood out as obscure systems within the general landscape of coordinative chemistry. However, this situation has started to change rapidly during the last decade, with more and more examples of metal-coordinated cationic species being reported. The growing interest in these systems is not only of purely academic nature, but also driven by accumulating evidence of their high catalytic utility. Overcoming the inherently poor coordinating ability of cationic species often required additional structural stabilization. In numerous cases this was realized by functionalizing them with a pair of chelating side-arms, effectively constructing a pincer-type scaffold. This comprehensive review aims to encompass all cationic ligands possessing such pincer architecture reported to date. Herein every cationic species that has ever been embedded in a pincer framework is described in terms of its electronic structure, followed by an in-depth discussion of its donor/acceptor properties, based on computational studies (DFT) and available experimental data (IR, NMR or CV). We then elaborate on how the positive charge of these ligands affects the spectroscopic and redox properties, as well as the reactivity, of their complexes, compared to those of the structurally related neutral ligands. Among other systems discussed, this review also surveys our own contribution to this field, namely, the introduction of sulfonium-based pincer ligands and their complexes, recently reported by our group.

Exploring the Te(II)/Te(IV) Redox Couple of a Tellurorosamine Chromophore: Photophysical, Photochemical, and Electrochemical Studies

A tellurorosamine dye [Te(II)] undergoes aerobic photooxidation. Although Te(IV) species have been used in a number of oxidations, key Te(IV)-oxo and Te(IV)-bis(hydroxy) intermediates are challenging to study. Under aerobic irradiation with visible light, Te(II) (λmax = 600 nm) transforms into a Te(IV) species (λmax = 669 nm). The resultant Te(IV) species is not stable in the dark or at -20 °C, decomposing back to Te(II) and other byproducts over many hours. To eliminate the structural ambiguity of the Te(IV) photoproduct, we used spectroelectrochemistry, wherein the bis(hydroxy) Te(IV)-(OH)2 was electrochemically generated under anaerobic conditions. The absorption of Te(IV)-(OH)2 matches that of the Te(IV) photoproduct. Because isosbestic points are maintained both photochemically and electrochemically, the oxo core formed photochemically must rapidly equilibrate with Te(IV)-(OH)2. Calculations on the bis(hydroxy) versus oxo species further corroborate that the equilibration is rapid and the spectra of the two species are similar. To further explore Te(IV) cores, two novel compounds, Te(IV)-Cl2 and Te(IV)-Br2, were synthesized. Characterization of Te(IV)-X2 was simplified because these cores have no analogue to the Te(IV)-(O)/Te(IV)-(OH)2 equilibrium. This work provides insights into the photophysical and electrochemical behavior of Te analogues of chalcogenoxanthylium dyes, which are relevant for a broad range of photochemical applications.

Sulfonium Cation in the Service of π-Acid Catalysis

While still rare, cationic ligands offer much promise as tunable electron-withdrawing ligands for π-acid catalysis. Recently, we introduced pincer-type sulfonium cations into the list of available strongly π-acidic ancillary ligands. However, the M-S bond in sulfonium complexes of these ligands was found highly labile, precluding their catalytic applications. Herein we demonstrate that this obstacle can be overcome by increasing the rigidity of the sulfonium pincer scaffold. X-ray analyses confirm that despite bearing a formal positive charge, the sulfur atom of this newly designed sulfonium ligand maintains its coordination to the Pt(II)-center, while DFT calculations indicate that by doing so it strongly enhances the electrophilic character of the metal. Kinetic studies carried out on three model cycloisomerization reactions prove that such a tris-cationic sulfonium-Pt(II) complex is highly reactive, compared to its thioether-based analogue. This proof-of-concept study presents the first example of employing sulfonium-based ligands in homogeneous catalysis.

Heterometallic bond activation enabled by unsymmetrical ligand scaffolds: bridging the opposites

Heterobi- and multimetallic complexes providing close proximity between several metal centers serve as active species in artificial and enzymatic catalysis, and in model systems, showing unique modes of metal-metal cooperative bond activation. Through the rational design of well-defined, unsymmetrical ligand scaffolds, we create a convenient approach to support the assembly of heterometallic species in a well-defined and site-specific manner, preventing them from scrambling and dissociation. In this perspective, we will outline general strategies for the design of unsymmetrical ligands to support heterobi- and multimetallic complexes that show reactivity in various types of heterometallic cooperative bond activation.

Light-Driven Hydrodefluorination of Electron-Rich Aryl Fluorides by an Anionic Rhodium-Gallium Photoredox Catalyst

An anionic Rh-Ga complex catalyzed the hydrodefluorination of challenging C-F bonds in electron-rich aryl fluorides and trifluoromethylarenes when irradiated with violet light in the presence of H₂ , a stoichiometric alkoxide base, and a crown-ether additive. Based on theoretical calculations, the lowest unoccupied molecular orbital (LUMO), which is delocalized across both the Rh and Ga atoms, becomes singly occupied upon excitation, thereby poising the Rh-Ga complex for photoinduced single-electron transfer (SET). Stoichiometric and control reactions support that the C-F activation is mediated by the excited anionic Rh-Ga complex. After SET, the proposed neutral Rh⁰ intermediate was detected by EPR spectroscopy, which matched the spectrum of an independently synthesized sample. Deuterium-labeling studies corroborate the generation of aryl radicals during catalysis and their subsequent hydrogen-atom abstraction from the THF solvent to generate the hydrodefluorinated arene products. Altogether, the combined experimental and theoretical data support an unconventional bimetallic excitation that achieves the activation of strong C-F bonds and uses H₂ and base as the terminal reductant.

Tellurium-induced functional group activation

Tellurium-chemistry comprises of vibrant and innovative prospects in major area of research and development. The function of Tellurium in organic synthesis remained underexplored till date. Moreover, the reactivity of Tellurium as Lewis acid or electrophilic reagents to activate functional group conceptually remains as an ever-demanding area to be investigated extensively. In this context, the present compilation portrays a detailed study on the reactivity of organotellurium compounds as catalyst, reagent, and sensors to explore the reactions occurring specifically through functional group activation.

Sulfonium cations as versatile strongly π-acidic ligands

More than a century old, sulfonium cations are still intriguing species in the landscape of organic chemistry. On one hand they have found broad applications in organic synthesis and materials science, but on the other hand, while isoelectronic to the ubiquitous tertiary phosphine ligands, their own coordination chemistry has been neglected for the last three decades. Here we report the synthesis and full characterization of the first Rh(i) and Pt(ii) complexes of sulfonium. Moreover, for the first time, coordination of an aromatic sulfonium has been established. A thorough computational analysis of the exceptionally short S-Rh bonds obtained attests to the strongly π-accepting nature of sulfonium cations and places them among the best π-acceptor ligands available today. Our calculations also show that embedding within a pincer framework enhances their π-acidity even further. Therefore, in addition to the stability and modularity that these frameworks offer, our pincer complexes might open the way for sulfonium cations to become powerful tools in π-acid catalysis.

Ir(IV) Sulfoxide-Pincer Complexes by Three-Electron Oxidative Additions of Br2 and I2. Unprecedented Trap-Free Reductive Elimination of I2 from a formal d5 Metal

Oxidative addition of 1.5 equiv of bromine or iodine to a Ir(I) sulfoxide pincer complex affords the corresponding Ir(IV) tris-bromido or tris-iodido complexes, respectively. The unprecedented trap-free reductive elimination of iodine from the Ir(IV)-iodido complex is induced by coordination of ligands or donor solvents. In the case of added I^-, the isostructural tris-iodo Ir(III)-ate complex is quickly generated, which then can be readily reoxidized to the Ir(IV)-iodido complex with FcPF₆ or electrochemically. DFT calculations indicate an "inverted ligand field" in the Ir(IV) complexes and favor dinuclear pathways for the reductive elimination of iodine from the formal d⁵ metal center.

Facile Synthesis and Utilization of Bis(o-phosphinophenyl)zinc as Isolable PZnP-pincer Ligands Enabled by Boron-Zinc Double Transmetallation

Bis(o-phosphinophenyl)zinc derivatives were successfully synthesized by the reaction of o-phosphinophenylboronates with dimethylzinc via boron-zinc double transmetallation. The transmetallation was significantly accelerated by the presence of the ortho PR2 substituent to...

Icosahedral m-Carboranes Containing Exopolyhedral B-Se and B-Te Bonds

Chalcogen-containing carboranes have been known for several decades and possess stable exopolyhedral B(9)-Se and B(9)-Te σ bonds despite the electron-donating ability of the B(9) vertex. While these molecules are known, little has been done to thoroughly evaluate their electrophilic and nucleophilic behavior. Herein, we report an assessment of the electrophilic reactivity of m-carboranylselenyl(II), -tellurenyl(II), and -tellurenyl(IV) chlorides and establish their reactivity pattern with Grignard reagents, alkenes, alkynes, enolates, and electron-rich arenes. These electrophilic reactions afford unique electron-rich B-Y-C (Y = Se, Te) bonding motifs not commonly found before. Furthermore, we show that m-carboranylselenolate, and even m-carboranyltellurolate, can be competent nucleophiles and participate in nucleophilic aromatic substitution reactions. Arene substitution chemistry is shown to be further extended to electron-rich species via palladium-mediated cross-coupling chemistry.

Photodriven Elimination of Chlorine From Germanium and Platinum in a Dinuclear PtII →GeIV Complex

Searching for a connection between the two-electron redox behavior of Group-14 elements and their possible use as platforms for the photoreductive elimination of chlorine, we have studied the photochemistry of [(o-(Ph₂ P)C₆ H₄ )₂ Ge^IV Cl₂ ]Pt^II Cl₂ and [(o-(Ph₂ P)C₆ H₄ )₂ ClGe^III ]Pt^III Cl₃ , two newly isolated isomeric complexes. These studies show that, in the presence of a chlorine trap, both isomers convert cleanly into the platinum germyl complex [(o-(Ph₂ P)C₆ H₄ )₂ ClGe^III ]Pt^I Cl with quantum yields of 1.7 % and 3.2 % for the Ge^IV -Pt^II and Ge^III -Pt^III isomers, respectively. Conversion of the Ge^IV -Pt^II isomer into the platinum germyl complex is a rare example of a light-induced transition-metal/main-group-element bond-forming process. Finally, transient-absorption-spectroscopy studies carried out on the Ge^III -Pt^III isomer point to a ligand arene-Cl^. charge-transfer complex as an intermediate.

Synthesis and Characterization of Tellurium Catecholates and Their N-Oxide Adducts

Tellurium catecholate complexes were investigated to probe the redox chemistry of tellurium, whose oxidation state can span from -2 to +6. Treating TeO₂ with catechols resulted in tellurium coordination complexes in high yields within minutes to hours at room temperature or with extended heating, depending on the ligand substituents, giving Te(IV) complexes of the form Te(C)₂, where C = 3,5-di-tert-butylcatecholate, o-catecholate, or tetrachlorocatecholate. The redox behavior of these complexes was investigated through addition of organic oxidants, giving nearly quantitative adducts of pyridine N-oxide or N-methylmorpholine N-oxide with each tellurium complex, the latter set leading to ligand oxidation upon heating. Each compound was characterized crystallographically and computationally, providing data consistent with a mostly electrostatic interaction and very little covalent character between the N-oxide and Te complex. The Te N-oxide bond orders are consistently lower than those with the catechol derivatives, as characterized with the Mayer, Gopinathan-Jug (G-J), and first Nalewajski-Mrozek (N-M1) bond indices. The tellurium lone pair is energetically buried by 1.93-2.81 eV, correlating with the observation that the ligands are more reactive than the tellurium center toward oxidation. This combined experimental and theoretical study finds structure-property relationships between ligand design and reactivity that will aid in future efforts for the recovery of tellurium.

Impact of the Novel Z-Acceptor Ligand Bis{(ortho-diphenylphosphino)phenyl}zinc (ZnPhos) on the Formation and Reactivity of Low-Coordinate Ru(0) Centers

The preparation and reactivity with H₂ of two Ru complexes of the novel ZnPhos ligand (ZnPhos = Zn(o-C₆H₄PPh₂)₂) are described. Ru(ZnPhos)(CO)₃ (2) and Ru(ZnPhos)(IMe₄)₂ (4; IMe₄ = 1,3,4,5-tetramethylimidazol-2-ylidene) are formed directly from the reaction of Ru(PPh₃)(C₆H₄PPh₂)₂(ZnMe)₂ (1) or Ru(PPh₃)₃HCl/LiCH₂TMS/ZnMe₂ with CO and IMe₄, respectively. Structural and electronic structure analyses characterize both 2 and 4 as Ru(0) species in which Ru donates to the Z-type Zn center of the ZnPhos ligand; in 2, Ru adopts an octahedral coordination, while 4 displays square-pyramidal coordination with Zn in the axial position. Under photolytic conditions, 2 loses CO to give Ru(ZnPhos)(CO)₂ that then adds H₂ over the Ru-Zn bond to form Ru(ZnPhos)(CO)₂(μ-H)₂ (3). In contrast, 4 reacts directly with H₂ to set up an equilibrium with Ru(ZnPhos)(IMe₄)₂H₂ (5), the product of oxidative addition at the Ru center. DFT calculations rationalize these different outcomes in terms of the energies of the square-pyramidal Ru(ZnPhos)L₂ intermediates in which Zn sits in a basal site: for L = CO, this is readily accessed and allows H₂ to add across the Ru-Zn bond, but for L = IMe₄, this species is kinetically inaccessible and reaction can only occur at the Ru center. This difference is related to the strong π-acceptor ability of CO compared to IMe₄. Steric effects associated with the larger IMe₄ ligands are not significant. Species 4 can be considered as a Ru(0)L₄ species that is stabilized by the Ru→Zn interaction. As such, it is a rare example of a stable Ru(0)L₄ species devoid of strong π-acceptor ligands.

Multielectron C–H photoactivation with an Sb(v) oxo corrole

An Sb(v) bis-μ-oxo corrole dimer performs photochemical multielectron C–H activation, oxidising toluene to benzaldehyde in a four-electron process.

Halide Photoredox Chemistry

Halide photoredox chemistry is of both practical and fundamental interest. Practical applications have largely focused on solar energy conversion with hydrogen gas, through HX splitting, and electrical power generation, in regenerative photoelectrochemical and photovoltaic cells. On a more fundamental level, halide photoredox chemistry provides a unique means to generate and characterize one electron transfer chemistry that is intimately coupled with X-X bond-breaking and -forming reactivity. This review aims to deliver a background on the solution chemistry of I, Br, and Cl that enables readers to understand and utilize the most recent advances in halide photoredox chemistry research. These include reactions initiated through outer-sphere, halide-to-metal, and metal-to-ligand charge-transfer excited states. Kosower's salt, 1-methylpyridinium iodide, provides an early outer-sphere charge-transfer excited state that reports on solvent polarity. A plethora of new inner-sphere complexes based on transition and main group metal halide complexes that show promise for HX splitting are described. Long-lived charge-transfer excited states that undergo redox reactions with one or more halogen species are detailed. The review concludes with some key goals for future research that promise to direct the field of halide photoredox chemistry to even greater heights.

Bis(6-Diphenylphosphinoacenaphth-5-yl)Telluride as a Ligand toward Manganese and Rhenium Carbonyls

The reaction of the previously known bis(6-diphenylphosphinoacenaphthyl-5-)telluride (6-Ph₂P-Ace-5-)₂Te (IV) with (CO)₅ReCl and (CO)₅MnBr proceeded with the liberation of CO and provided fac-(6-Ph₂P-Ace-5-)₂TeM(X)(CO)₃ (fac-1: M = Re, X = Cl; fac-2: M = Mn, X = Br), in which IV acts as bidentate ligand. In solution, fac-1 and fac-2 are engaged in a reversible equilibrium with mer-(6-Ph₂P-Ace-5-)₂TeM(X)(CO)₃ (mer-1: M = Re, X = Cl; mer-2: M = Mn, X = Br). Unlike fac-1, fac-2 is prone to release another equivalent of CO to give (6-Ph₂P-Ace-5-)₂TeMn(Br)(CO)₂ (3), in which IV serves as tridentate ligand.

Synthesis and self-assembly of thiol-modified tellurophenes

An asymmetric thiol-modified tellurophene was designed and synthesized, and the ability of the compound to form a monolayer on a gold electrode was confirmed. The surface-active tellurophene was synthesized using Cadiot–Chodkiewicz coupling followed by ring closing and thiol modification. The tellurophene compound forms a monolayer on gold surfaces from a concentrated solution within 24 h. The ability of the compound to conjugate to gold is confirmed by X-ray photoelectron spectroscopy (XPS). A surface blocking experiment was used to evaluate the extent of formation of a monolayer on a gold electrode.

Synthesis and Oxidation of a Paddlewheel-Shaped Rhodium/Antimony Complex Featuring Pyridine-2-Thiolate Ligands

The paddlewheel-shaped complex [Sb(μ-pyS)₄ Rh]₂ (1) (pyS^- = 2-S-C₅ H₄ N^- ) was synthesized from [Rh(pyS)(cod)]₂ (cod=1,5-cyclooctadiene) and Sb(pyS)₃ . Upon oxidation with ONMe₃ , the complex [(μ-O)Sb(μ-pyS)₃ Rh(κ² -pyS)]₂ (2) is formed. Both 1 and 2 form dimers and feature short Rh-Sb bonds and bridging pyS ligands. ¹²¹ Sb Mössbauer spectro- scopy and computational studies were employed to elucidate the Rh-Sb bonding in 1 and 2. Both covalent (Rh-Sb, X-type Sb ligand) and dative (Rh→Sb, Z-type; Rh←Sb L-type Sb ligand) interactions have to be considered for the description of their bonding situations.

Emerging trends in organotellurolate chemistry derived from platinoids

This perspective begins with the discussion of various basic synthetic approaches applied for the synthesis of several organotellurium ligands, their chemistry derived from platinum group metals, and the reactivity difference among them.

Stereoelectronic Effects in Cl2 Elimination from Binuclear Pt(III) Complexes

Halogen photoelimination is the critical energy-storing step of metal-catalyzed HX-splitting photocycles. Homo- and heterobimetallic Pt(III) complexes display among the highest quantum efficiencies for halogen elimination reactions. Herein, we examine in detail the mechanism and energetics of halogen elimination from a family of binuclear Pt(III) complexes featuring meridionally coordinated Pt(III) trichlorides. Transient absorption spectroscopy, steady-state photocrystallography, and far-infrared vibrational spectroscopy suggest a halogen elimination mechanism that proceeds via two sequential halogen-atom-extrusion steps. Solution-phase calorimetry experiments of the meridional complexes have defined the thermodynamics of halogen elimination, which show a decrease in the photoelimination quantum efficiency with an increase in the thermochemically defined Pt-X bond strength. Conversely, when compared to an isomeric facial Pt(III) trichloride, a much more efficient photoelimination is observed for the fac isomer than would be predicted based on thermochemistry. This difference in the fac vs mer isomer photochemistry highlights the importance of stereochemistry on halogen elimination efficiency and points to a mechanism-based strategy for achieving halogen elimination reactions that are both efficient and energy storing.

Visible-Light-Induced Olefin Activation Using 3D Aromatic Boron-Rich Cluster Photooxidants

We report a discovery that perfunctionalized icosahedral dodecaborate clusters of the type B12(OCH2Ar)12 (Ar = Ph or C6F5) can undergo photo-excitation with visible light, leading to a new class of metal-free photooxidants. Excitation in these species occurs as a result of the charge transfer between low-lying orbitals located on the benzyl substituents and an unoccupied orbital delocalized throughout the boron cluster core. Here we show how these species, photo-excited with a benchtop blue LED source, can exhibit excited-state reduction potentials as high as 3 V and can participate in electron-transfer processes with a broad range of styrene monomers, initiating their polymerization. Initiation is observed in cases of both electron-rich and electron-deficient styrene monomers at cluster loadings as low as 0.005 mol%. Furthermore, photo-excitation of B12(OCH2C6F5)12 in the presence of a less activated olefin such as isobutylene results in the production of highly branched poly(isobutylene). This work introduces a new class of air-stable, metal-free photo-redox reagents capable of mediating chemical transformations.

Coordination- and Redox-Noninnocent Behavior of Ambiphilic Ligands Containing Antimony

Stimulated by applications in catalysis, the chemistry of ambiphilic ligands featuring both donor and acceptor functionalities has experienced substantial growth in the past several years. The unique opportunities in catalysis offered by ambiphilic ligands stem from the ability of their acceptor functionalities to play key roles via metal-ligand cooperation or modulation of the reactivity of the metal center. Ligands featuring group 13 centers, most notably boranes, as their acceptor functionalities have undoubtedly spearheaded these developments, with remarkable results having been achieved in catalytic hydrogenation and hydrosilylation. Motivated by these developments as well as by our fundamental interest in the chemistry of heavy group 15 elements, we became fascinated by the possibility of employing antimony centers as Lewis acids within ambiphilic ligands. The chemistry of antimony-based ligands, most often encountered as trivalent stibines, has historically been considered to mirror that of their lighter phosphorus-based congeners. There is growing evidence, however, that antimony-based ligands may display unique coordination behavior and reactivity. Additionally, despite the diverse Lewis acid and redox chemistry that antimony exhibits, there have been only limited efforts to explore this chemistry within the coordination sphere of a transition metal. By incorporation of antimony into the framework of polydentate ligands in order to enforce the main group metal-transition metal interaction, the effect of redox and coordination events at the antimony center on the structure, electronics, and reactivity of the metal complex may be investigated. This Account describes our group's continuing efforts to probe the coordination behavior, reactivity, and application of ambiphilic ligands incorporating antimony centers. Structural and theoretical studies have established that both Sb(III) and Sb(V) centers in polydentate ligands may act as Z-type ligands toward late transition metals. Although coordinated to a metal, the antimony centers in these complexes retain residual Lewis acidity, as evidenced by their ability to participate in anion binding. Anion binding events at the antimony center have been shown by structural, spectroscopic, and theoretical studies to perturb the antimony-transition metal interaction and in some cases to trigger reactivity at the metal center. Coordinated Sb(III) centers in polydentate ligands have also been found to readily undergo two-electron oxidation, generating strongly Lewis acidic Sb(V) centers in the coordination sphere of the metal. Theoretical studies suggest that oxidation of the coordinated antimony center induces an umpolung of the antimony-metal bond, resulting in depletion of electron density at the metal center. In addition to elucidating the fundamental coordination and redox chemistry of antimony-containing ambiphilic ligands, our work has demonstrated that these unusual behaviors show promise for use in a variety of applications. The ability of coordinated antimony centers to bind anions has been exploited for sensing applications, in which anion coordination at antimony leads to a colorimetric response via a change in the geometry about the metal center. In addition, the capacity of antimony Lewis acids to modulate the electron density of coordinated metals has proved to be key in facilitating photochemical activation of M-X bonds as well as antimony-centered redox-controlled catalysis.

A Mechanistic Study of Halogen Addition and Photoelimination from π-Conjugated Tellurophenes

The ability to drive reactivity using visible light is of importance for many disciplines of chemistry and has significant implications for sustainable chemistry. Identifying photochemically active compounds and understanding photochemical mechanisms is important for the development of useful materials for synthesis and catalysis. Here we report a series of photoactive diphenyltellurophene compounds bearing electron-withdrawing and electron-donating substituents synthesized by alkyne coupling/ring closing or palladium-catalyzed ipso-arylation chemistry. The redox chemistry of these compounds was studied with respect to oxidative addition and photoelimination of bromine, which is of importance for energy storage reactions involving X2. The oxidative addition reaction mechanism was studied using density functional theory, the results of which support a three-step mechanism involving the formation of an initial η(1) association complex, a monobrominated intermediate, and finally the dibrominated product. All of the tellurophene derivatives undergo photoreduction using 430, 447, or 617 nm light depending on the absorption properties of the compound. Compounds bearing electron-withdrawing substituents have the highest photochemical quantum efficiencies in the presence of an alkene trap, with efficiencies of up to 42.4% for a pentafluorophenyl-functionalized tellurophene. The photoelimination reaction was studied in detail through bromine trapping experiments and laser flash photolysis, and a mechanism is proposed. The photoreaction, which occurs by release of bromine radicals, is competitive with intersystem crossing to the triplet state of the brominated species, as evidenced by the formation of singlet oxygen. These findings should be useful for the design of new photochemically active compounds supported by main-group elements.

Group 10–group 14 metal complexes [E–TM]IV: the role of the group 14 site as an L, X and Z-type ligand

The group 14 element's ligand role in N,S-bridged transition metal complexes was shown to depend on both atoms’ substitution patterns.