Fluorous polymeric membranes for ionophore-based ion-selective potentiometry: how inert is Teflon AF?

Recent advances in polymeric nanostructured ion selective membranes for biomedical applications

Nano structured ion-selective membranes (ISMs) are very attractive materials for a wide range of sensing and ion separation applications. The present review focuses on the design principles of various ISMs; nanostructured and ionophore/ion acceptor doped ISMs, and their use in biomedical engineering. Applications of ISMs in the biomedical field have been well-known for more than half a century in potentiometric analysis of biological fluids and pharmaceutical products. However, the emergence of nanotechnology and sophisticated sensing methods assisted in miniaturising ion-selective electrodes to needle-like sensors that can be designed in the form of implantable or wearable devices (smartwatch, tattoo, sweatband, fabric patch) for health monitoring. This article provides a critical review of recent advances in miniaturization, sensing and construction of new devices over last decade (2011-2021). The designing of tunable ISM with biomimetic artificial ion channels offered intensive opportunities and innovative clinical analysis applications, including precise biosensing, controlled drug delivery and early disease diagnosis. This paper will also address the future perspective on potential applications and challenges in the widespread use of ISM for clinical use. Finally, this review details some recommendations and future directions to improve the accuracy and robustness of ISMs for biomedical applications.

A Bis-Acridinium Macrocycle as Multi-Responsive Receptor and Selective Phase-Transfer Agent of Perylene

A bis-acridinium cyclophane incorporating switchable acridinium moieties linked by a 3,5-dipyridylanisole spacer was studied as a multi-responsive host for polycyclic aromatic hydrocarbon guests. Complexation of perylene was shown to be the most effective and was characterized in particular by a charge-transfer band as signal output. Effective catch and release of the guest was triggered by both chemical (proton/hydroxide) and redox stimuli. Moreover, the dicationic host was also easily switched between organic and perfluorocarbon phases for applications related to the enrichment of perylene from a mixture of polycyclic aromatic hydrocarbons.

Fluorous-Phase Ion-Selective pH Electrodes: Electrode Body and Ionophore Optimization for Measurements in the Physiological pH Range

Because of their low polarity and polarizability, fluorous sensing membranes are both hydrophobic and lipophobic and exhibit very high ion selectivities. Here, we report on a new fluorous-membrane ion-selective electrode (ISE) with a wide sensing range centered around physiologically relevant pH values. The fluorophilic tris[perfluoro(octyl)butyl]amine (N[(CH₂)₄R_f8]₃) was synthesized and tested as a new H⁺ ionophore using a redesigned electrode body that provides excellent mechanical sealing and much improved measurement reliability. In a challenging 1 M KCl background, these fluorous-phase ISEs exhibit a sensing range from pH 2.2 to 11.2, which is one of the widest working ranges reported to date for ionophore-based H⁺ ISEs. High selectivities against common interfering ions such as K⁺, Na⁺, and Ca²⁺ were determined (selectivity coefficients: logK _H, K ^pot = - 11.6; logK _H, Na ^pot = - 12.4; logK _H, Ca ^pot < - 10.2). The use of the N[(CH₂)₄R_f8]₃ ionophore with its -(CH₂)₄- spacers separating the amino group from the strongly electron-withdrawing perfluorooctyl groups improved the potentiometric selectivity as compared to the less basic tris[perfluoro(octyl)propyl]amine ionophore. The use of N[(CH₂)₄R_f8]₃ also made the ISE less prone to counter anion failure (i.e., Donnan failure) at low pH than the use of tris[perfluoro(octyl)pentyl]amine with its longer -(CH₂)₅- spacers, which more effectively shield the amino center from the perfluorooctyl groups. In addition, we exposed both conventional plasticized PVC-phase pH ISEs and fluorous-phase pH ISEs to 10% serum for 5 days. Results show that the PVC-phase ISEs lost selectivity while their fluorous-phase counterparts did not.

Ion Aggregation and R3N+-C(R)-H···NR3 Hydrogen Bonding in a Fluorous Phase

Potentiometric selectivities show that in fluorous ion-selective electrode membranes the tetrabutylammonium ion binds to fluorophilic proton ionophores. For the ionophore bis[3-(perfluorooctyl)propyl](2,2,2-trifluoroethyl)amine, this type of interaction is confirmed by the effect of the ionophore on the ionic conductivity of perfluoro(perhydrophenanthrene) solutions of a fluorophilic NBu₄⁺ salt. In this system, ion pairs, triple ions, and higher ionic aggregates dominate over single ions, and the ionophore increases the conductivity by favoring the formation of ion aggregates with a net charge. These observations are consistent with the formation of R₃N⁺-C(R)-H···NR₃ type hydrogen bonds between the nitrogen atom of the ionophore and the hydrogen atoms in the α position to the positively charged quaternary ammonium center of NBu₄⁺. Similar interactions were observed in a number of crystalline phases. To date, observations of C-H···N type hydrogen bonds in liquid phases have been very few, and solution-phase N⁺-C-H···N type hydrogen bonds have not been reported previously. Interestingly, no interactions between NBu₄⁺ and the more basic ionophore tridodecylamine were observed in conventional plasticized poly(vinyl chloride) membranes doped with the ionophore tridodecylamine, emphasizing the uniquely low polarity of fluorous phases.

Multielectrode bisensor system for time-resolved monitoring of ion transport across an epithelial cell layer

An ion-selective multielectrode bisensor system is designed to ensure reliable real-time concentration measurements of sodium, potassium, chloride, and pH in a small volume of biological liquid bathing a living human bronchial epithelial cell monolayer. The bisensor system allows the monitoring of major ions, which are simultaneously transported through the epithelia in both directions.

Ion-selective electrodes with unusual response functions: simultaneous formation of ionophore-primary ion complexes with different stoichiometries

It is well known that the selectivity of an ion-selective electrode (ISE) depends on the stoichiometry of the complexes between its ionophore and the target and interfering ions. It is all the more surprising that the possibility for the simultaneous occurrence of multiple target ion complexes with different complex stoichiometries was mostly ignored in the past. Here, we report on the simultaneous formation of 1:1 and 1:2 complexes of a fluorophilic crown ether in fluorous ISE membranes and how this results in what looks like super-Nernstian responses. These increased response slopes are not caused by mass transfer limitations and can be readily explained with a phase boundary model, a finding that is supported by experimentally determined complex formation constants and excellent fits of response curves. Not only Cs(+) but also the smaller ions Li(+), Na(+), K(+), and NH(4)(+) form 1:1 and 1:2 complexes with the fluorophilic crown ether, with cumulative formation constants of up to 10(15.0) and 10(21.0) for of the 1:1 and 1:2 complexes, respectively. Super-Nernstian responses of the type observed with these electrodes are probably not particularly rare but have lacked in the past an adequate discussion in the literature, remaining ignored or misinterpreted. Preliminary calculations also predict sub-Nernstian responses and potential dips of a similar origin. The proper understanding of such phenomena will facilitate the development of new ISEs based on ionophores that form complexes of higher stoichiometries.

Potentiometric sensors based on fluorous membranes doped with highly selective ionophores for carbonate

Manganese(III) complexes of three fluorophilic salen derivatives were used to prepare ion-selective electrodes (ISEs) with ionophore-doped fluorous sensing membranes. Because of their extremely low polarity and polarizability, fluorous media are not only chemically very inert but also solvate potentially interfering ions poorly, resulting in a much improved discrimination of such ions. Indeed, the new ISEs exhibited selectivities for CO(3)(2-) that exceed those of previously reported ISEs based on nonfluorous membranes by several orders of magnitude. In particular, the interference from chloride and salicylate was reduced by 2 and 6 orders of magnitude, respectively. To achieve this, the selectivities of these ISEs were fine-tuned by addition of noncoordinating hydrophobic ions (i.e., ionic sites) into the sensing membranes. Stability constants of the anion-ionophore complexes were determined from the dependence of the potentiometric selectivities on the charge sign of the ionic sites and the molar ratio of ionic sites and the ionophore. For this purpose, a previously introduced fluorophilic tetraphenylborate and a novel fluorophilic cation with a bis(triphenylphosphoranylidene)ammonium group, (R(f6)(CH(2))(3))(3)PN(+)P(R(f6)(CH(2))(3))(3), were utilized (where R(f6) is C(6)F(13)). The optimum CO(3)(2-) selectivities were found for sensing membranes composed of anionic sites and ionophore in a 1:4 molar ratio, which results in the formation of 2:1 complexes with CO(3)(2-) with stability constants up to 4.1 × 10(15). As predicted by established theory, the site-to-ionophore ratios that provide optimum potentiometric selectivity depend on the stoichiometries of the complexes of both the primary and the interfering ions. However, the ionophores used in this study give examples of charges and stoichiometries previously neither explicitly predicted by theory nor shown by experiment. The exceptional selectivity of fluorous membranes doped with these carbonate ionophores suggests their use not only for potentiometric sensing but also for other types of sensors, such as the selective separation of carbonate from other anions and the sequestration of carbon dioxide.

A two-component polymeric optode membrane based on a multifunctional ionic liquid

This work details the use of a 2-component optode membrane which is capable of generating three distinct colours in the presence of Cu(2+) and Co(2+) ions. It has been found that the ionic liquid (IL) trihexyltetradecylphosphonium dicyanamide [P(6,6,6,14)][DCA] can act as plasticizer, ligand and transducer dye when used in poly(vinyl chloride) (PVC) membranes, which significantly simplifies the optode membrane cocktail. Upon exposure to an aqueous Cu(2+) solution, a yellow colour is generated within the membrane, while exposure to an aqueous Co(2+) solution generates a blue colour. Exposure to a solution containing both ions produces a green colour. Vibrational spectroscopy has been used to investigate the molecular basis of the IL-metal ion the binding mechanism. Analytical characteristics of the membranes including the effect of interfering ions, binding constants and the limit of detection for both ions have been estimated. Finally the case of simultaneous dual-analyte recognition is presented based on two distinct absorption maxima.

Highly selective detection of silver in the low ppt range with ion-selective electrodes based on ionophore-doped fluorous membranes

Ionophore-doped sensing membranes exhibit greater selectivities and wider measuring ranges if their membrane matrixes are noncoordinating and solvate interfering ions poorly. This is particularly true for fluorous phases, which are the least polar and polarizable condensed phases known. In this work, fluorous membrane matrixes were used to prepare silver ion-selective electrodes (ISEs). Sensing membranes composed of perfluoroperhydrophenanthrene, sodium tetrakis[3,5-bis(perfluorohexyl) phenyl]borate, and one of four fluorophilic Ag(+)-selective ionophores with one or two thioether groups were investigated. All electrodes exhibited Nernstian responses to Ag(+) in a wide range of concentrations. Their selectivities for Ag(+) over interfering ions were found to depend on host preorganization and the length of the -(CH(2))(n)- spacers separating the coordinating thioether group from the strongly electron withdrawing perfluoroalkyl groups. ISEs based on the most selective of the four ionophores, that is, 1,3-bis(perfluorodecylethylthiomethyl)benzene, provided much higher selectivities for Ag(+) over many alkaline and heavy metal ions than most Ag(+) ISEs reported in the literature (e.g., log K(Ag,J)(pot) for K(+), -11.6; Pb(2+), -10.2; Cu(2+), -13.0; Cd(2+), -13.2). Moreover, the use of this ionophore with a linear perfluorooligoether as membrane matrix and solid contacts consisting of three-dimensionally ordered macroporous (3DOM) carbon resulted in a detection limit for Ag(+) of 4.1 ppt (3.8 × 10(-1)1 M).

Teflon AF Materials

The unique combination of chemical, thermal, and mechanical stability, high fractional free volume, low refractive index, low surface energy, and wide optical transparency has led to growing interest in Teflon Amorphous Fluoropolymers (AFs) for a wide spectrum of applications ranging from chemical separations and sensors to bioassay platforms. New opportunities arise from the incorporation of nanoscale materials in Teflon AFs. In this chapter, we highlight fractional free volume - the most important property of Teflon AFs - with the aim of clarifying the unique transport behavior through Teflon AF membranes. We then review state-of-the-art developments based on Teflon AF platforms by focusing on the chemistry behind the applications.

Properties and transport behavior of perfluorotripentylamine (FC-70)-doped amorphous teflon AF 2400 films

Teflon AF 2400 films are known to imbibe solvents, making films in the presence of solvents less fluorous than they might otherwise be. Herein, we demonstrate that doping films with perfluorotripentylamine (Fluorinert FC-70) maintains the fluorous nature of Teflon AF 2400 and improves transport selectivity for fluorine-containing organic compounds. Density measurements on the FC-70-doped films reveal that free volume decreases dramatically as the dopant concentration increases (0-12 wt %) and then increases to approach that of pure FC-70. Remarkably, films from 0 to 12 wt % FC-70 have the same w/v concentration of Teflon AF 2400, indicating that FC-70 fills the free volume of Teflon AF 2400. This is consistent with the observed increased storage modulus and significant decrease (compared to undoped films) of solute diffusion coefficients in the same range of FC-70 concentrations. In contrast, FC-70 at concentrations greater than 12 wt % dilutes Teflon AF 2400, leading to a decrease of storage modulus and dramatic increase in solute diffusion coefficients. Sorption of chloroform decreases from 11.8 g of chloroform/100 g of film (pure Teflon film) to 3.8 g of chloroform/100 g of film (27 wt % FC-70-doped Teflon film), less than the solubility of chloroform in pure FC-70 (4.06 g of chloroform/100 g of FC-70). Solute partition coefficients from chloroform to FC-70-doped films generally decrease with increased dopant concentration. However, within a series of toluenes and nitrobenzenes, selectivity for F-containing solutes over analogous H-containing solutes increases as dopant concentration increases if the substitution is on the aromatic ring but not if it is on the methyl group (toluene). Transport (partitioning × diffusion) rates, as they involve both thermodynamic and kinetic factors, are not simply related to composition.

Electrochemistry in Media of Exceptionally Low Polarity: Voltammetry with a Fluorous Solvent

This work demonstrates the first cyclic voltammetry in a perfluorocarbon solvent without use of a cosolvent. The novel electrolyte tetrabutylammonium tetrakis[3,5-bis(perfluorohexyl)phenyl]borate (NBu(4)BArF(104); 80 mM) allows for voltammetry of ferrocene in perfluoro(methylcyclohexane) by lowering the specific resistance to Ω268 k cm at 20.8 °C. Despite significant solution resistance, the resulting voltammograms can be fitted quantitatively without difficulty. The thus determined standard electron transfer rate constant, k°, for the oxidation of ferrocene in perfluoro(methylcyclohexane) is somewhat smaller than for many solvents commonly used in electrochemistry, but can be explained readily as the result of the viscosity and size of the solvent using Marcus theory. Dielectric dispersion spectroscopy verifies that addition of NBu(4)BArF(104) does not significantly raise the overall polarity of the solution over that of neat perfluoro(methylcyclohexane).

Cation-Coordinating Properties of Perfluoro-15-Crown-5

The coordinative properties of perfluoro-15-crown-5 with monocations were investigated using (19)F NMR spectroscopy and ion-selective electrodes with perfluoro-15-crown-5 as the matrix of their sensor membranes and the fluorophilic tetrakis[3,5-bis(perfluorohexyl)phenyl]borate as ion exchanger site. The results show that perfluoro-15-crown-5 interacts weakly but significantly with Na(+) and K(+). Assuming 1:1 stoichiometry, the formal complexation constants were determined to be 5.5 and 1.7 M(-1), respectively. This weak binding is consistent with the strong electron withdrawing nature of the many fluorine atoms in the perfluorocrown ether. While perfluorinated crown ethers have been known to form host-guest complexes with the anions O(2) (-) and F(-) in the gas phase, this is the first study that quantitatively confirms cation binding to a perfluorocrown ether.

Low-melting ionic solids: versatile materials for ion-sensing devices

Ionic liquids that melt slightly above room temperature (and may be called low-melting ionic solids, LMISs) were used as sensing materials for the detection of ions in aqueous solutions. A simple procedure based on the consecutive melting and further solidification of the LMISs was applied to prepare solid-contact ion-sensitive electrodes. A potentiometric response toward a number of anions was observed, and the possibility of altering the selectivity by incorporating additional ionophores into the LMIS matrix was demonstrated.

The three-dimensional structure of carnocyclin A reveals that many circular bacteriocins share a common structural motif

Carnocyclin A (CclA) is a potent antimicrobial peptide from Carnobacterium maltaromaticum UAL307 that displays a broad spectrum of activity against numerous Gram-positive organisms. An amide bond links the N and C termini of this bacteriocin, imparting stability and structural integrity to this 60-amino acid peptide. CclA interacts with lipid bilayers in a voltage-dependent manner and forms anion selective pores. Several other circular bacteriocins have been reported, yet only one (enterocin AS-48) has been structurally characterized. We have now determined the solution structure of CclA by NMR and further examined its anion binding and membrane channel properties. The results reveal that CclA preferentially binds halide anions and has a structure that is surprisingly similar to that of AS-48 despite low sequence identity, different oligomeric state, and disparate function. CclA folds into a compact globular bundle, comprised of four helices surrounding a hydrophobic core. NMR studies show two fluoride ion binding modes for CclA. Our findings suggest that although other circular bacteriocins are likely to have diverse mechanisms of action, many may have a common structural motif. This shared three-dimensional arrangement resembles the fold of mammalian saposins, peptides that either directly lyse membranes or serve as activators of lipid-degrading enzymes.