The Biological Activities of Polyether Ionophore Antibiotic Routiennocin is Independent of Absolute Stereochemistry

Carboxylic polyether ionophores (CPIs) are among the most prevalent agricultural antibiotics (notably in the US) and these compounds have been in use for decades. The potential to reposition CPIs beyond veterinary use, e. g. through chemical modifications to enhance their selectivity window, is an exciting challenge and opportunity, considering their general resilience towards resistance development. Given the very large societal impact of these somewhat controversial compounds, it is surprising that many aspects of their mechanisms and activities in cells remain unclear. Here, we report comparative biological activities of the CPI routiennocin and two stereoisomers, including its enantiomer. We used an efficient convergent synthesis strategy to access the compounds and conducted a broad survey of antibacterial activities against planktonic cells and biofilms as well as the compounds' effects on mammalian cells, the latter assessed both via standard cell viability assays and broad morphological profiling. Interestingly, similar bioactivity of the enantiomeric pair was observed across all assays, strongly suggesting that chiral interactions do not play a decisive role in the mode of action. Overall, our findings are consistent with a mechanistic model involving highly dynamic behaviour of CPIs in biological membranes.

Pb2+-Selective Nanoemulsion-Integrated Single-Entity Electrochemistry for Ultrasensitive Sensing of Blood Lead

Unequivocally, Pb2+ as a harmful substance damaging children's brain and nerve systems, thereby causing behavior and learning disabilities, should be detected much lower than the elevated blood lead for children, 240 nM, endorsed by US CDC considering the unknown neurotoxic effects, yet the ultralow detection limit up to sub-ppb level remains a challenge due to the intrinsically insufficient sensitivity in the current analytical techniques. Here, we present nanoemulsion (NE)-integrated single-entity electrochemistry (NI-SEE) toward ultrasensitive sensing of blood lead using Pb-ion-selective ionophores inside a NE, i.e., Pb2+-selective NE. Through the high thermodynamic selectivity between Pb2+ and Pb-ionophore IV, and the extremely large partition coefficient for the Pb2+-Pb-ionophore complex inside NEs, we modulate the selectivity and sensitivity of NI-SEE for Pb2+ sensing up to an unprecedentedly low detection limit, 20 ppt in aqueous solutions, and lower limit of quantitation, 40 ppb in blood serums. This observation is supported by molecular dynamics simulations, which clearly corroborate intermolecular interactions, e.g., H-bonding and π*-n, between the aromatic rings of Pb-ionophore and lone pair electrons of oxygen in dioctyl sebacate (DOS), plasticizers of NEs, subsequently enhancing the current intensity in NI-SEE. Moreover, the highly sensitive sensing of Pb2+ is enabled by the appropriate suppression of hydroxyl radical formation during NI-SEE under a cathodic potential applied to a Pt electrode. Overall, the experimentally demonstrated NI-SEE approach and the results position our new sensing technology as potential sensors for practical environmental and biomedical applications as well as a platform to interrogate the stoichiometry of target ion-ionophore recognition inside a NE as nanoreactors.

Ionophore-modified polyaniline-based optode for the determination of hydrogen sulfite levels in beverages, wastewater, and soil

Sulfite is a very important species, affecting human health, plant and animal life, and environmental sustainability. In this study, for the first time, an ionophore-based ion-selective optode was constructed for hydrogen sulfite determination in beverages, such as Birell® and Sprite®, water, and soil samples; instead of normal pH-chromoionophores, polyaniline film was precipitated on a glass slide and used for the transduction of the sensation mechanism. The ionophore-modified polyaniline-based optode incorporated thiourea derivative as an ionophore and tridodecyl methyl ammonium chloride as an ion-exchanger. The optode film was prepared in situ with a modified chemical polymerization method, and it was characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM), and X-ray diffraction (XRD); also, FTIR spectroscopy was performed for the film before and after interaction with hydrogen sulfite for mechanism elucidation. The optode was applied in the hydrogen sulfite concentration range of 10-1 to 10-5 M with a low detection limit of 8.0 × 10-6 M and minimum interference of other interfering species, such as salicylate, iodide, and sulphide. The response mechanism was due to the ion-exchange of hydrogen sulfite with the anion exchanger, followed by the molecular recognition between thiourea ionophore and hydrogen sulfite, with concomitant redox reaction via the protonation of the polyaniline that causes a decrease in absorbance at 685 nm. The optode was applied successfully for the determination of hydrogen sulfite in real beverages, Birell® and Sprite® without any pretreatment steps. Also, it was applied successfully for the environmental monitoring of hydrogen sulfite in real wastewater and soil samples.

Stimuli-responsive release of active anionophore from RGD-peptide-linked proanionophore

Integrin-mediated cellular delivery was attempted to optimize practical applications of hydrophobic ionophores. The potent ionophore preferentially transports H+/Cl- across the lipid bilayers following a symport mechanism. The RGD-peptide-appended tag was stimulated by glutathione to generate the active ionophore, prompting the transport of Cl- under the cellular environment.

Potentiometric Sensing of Nonsteroidal Painkillers by Acyclic Squaramide Ionophores

We report here a small library of a new type of acyclic squaramide receptors (L1-L5) as selective ionophores for the detection of ketoprofen and naproxen anions (KF- and NS-, respectively) in aqueous media. 1H NMR binding studies show a high affinity of these squaramide receptors toward KF- and NS-, suggesting the formation of H-bonds between the two guests and the receptors through indole and -NH groups. Compounds L1-L5 have been tested as ionophores for the detection of KF- and NS- inside solvent PVC-based polymeric membranes. The optimal membrane compositions were established through the careful variation of the ligand/tridodecylmethylammonium chloride (TDMACl) anion-exchanger ratio. All of the tested acyclic squaramide receptors L1-L5 have high affinity toward KF- and NS- and anti-Hofmeister selectivity, with L4 and L5 showing the highest sensitivity and selectivity to NS-. The utility of the developed sensors for a high precision detection of KF- in pharmaceutical compositions with low relative errors of analysis (RSD, 0.99-1.4%) and recoveries, R%, in the range 95.1-111.8% has been demonstrated. Additionally, the chemometric approach has been involved to effectively discriminate between the structurally very similar KF- and NS-, and the possibility of detecting these analytes at concentrations as low as 0.07 μM with R2 of 0.947 and at 0.15 μM with R2 of 0.919 for NS- and KF-, respectively, was shown.

Ultrasensitive Ionophore-Based Liquid Sensors for Colorimetric Ion Measurements in Blood

The self-monitoring of electrolytes using a small volume of capillary blood is needed for the management of many chronic diseases. Herein, we report an ionophore-based colorimetric sensor for electrolyte measurements in a few microliters of blood. The sensor is a pipet microtip preloaded with a segment of oil (plasticizer) containing a pH-sensitive chromoionophore, a cation exchanger, and an ionophore. The analyte is extracted from the sample into the oil via a mixing protocol controlled by a stepper motor. The oil with an optimized ratio of sensing chemicals shows an unprecedentedly large color response for electrolytes in a very narrow concentration range that is clinically relevant. This ultrahigh sensitivity is based on an exhaustive response mode with a novel mechanism for defining the lower and higher limits of detection. Compared to previous optodes and molecular probes for ions, the proposed platform is especially suitable for at-home blood electrolyte measurements because (1) the oil sensor is interrogated independent of the sample and therefore works for whole blood without requiring plasma separation; (2) the sensor does not need individual calibration as the consistency between liquid sensors is high compared to solid sensors, such as ion-selective electrodes and optodes; and (3) the sensing system consisting of a disposable oil sensor, a programmed stepper motor, and a smartphone is portable, cost-effective, and user-friendly. The accuracy and precision of Ca2+ sensors are validated in 51 blood samples with varying concentrations of total plasma Ca2+. Oil sensors with an ultrasensitive response can also be obtained for other ions, such as K+.

Polyether Ionophore Antibiotics Target Drug-Resistant Clinical Isolates, Persister Cells, and Biofilms

Polyether ionophores are complex natural products known to transport various cations across biological membranes. While several members of this family are used in agriculture (e.g., as anti-coccidiostats) and have potent antibacterial activity, they are not currently being pursued as antibiotics for human use. Polyether ionophores are typically grouped as having similar functions, despite the fact that they significantly differ in structure; for this reason, how their structure and activity are related remains unclear. To determine whether certain members of the family constitute particularly interesting springboards for in-depth investigations and future synthetic optimization, we conducted a systematic comparative study of eight different polyether ionophores for their potential as antibiotics. This includes clinical isolates from bloodstream infections and studies of the compounds' effects on bacterial biofilms and persister cells. We uncover distinct differences within the compound class and identify the compounds lasalocid, calcimycin, and nanchangmycin as having particularly interesting activity profiles for further development. IMPORTANCE Polyether ionophores are complex natural products used in agriculture as anti-coccidiostats in poultry and as growth promoters in cattle, although their precise mechanism is not understood. They are widely regarded as antimicrobials against Gram-positive bacteria and protozoa, but fear of toxicity has so far prevented their use in humans. We show that ionophores generally have very different effects on Staphylococcus aureus, both in standard assays and in more complex systems such as bacterial biofilms and persister cell populations. This will allow us to focus on the most interesting compounds for future in-depth investigations and synthetic optimizations.

Non-Enzymatic Phenylboronic Acid-Based Optode Membrane for Glucose Monitoring in Serums of Diabetic Patients and in the Culture Medium of Human Embryos

Monitoring glucose levels is important not only for diabetics, but also for tracking embryonic development in human embryo culture media. In this study, an optochemical sensor (glucose-selective polymer membrane) was fabricated for the determination of glucose in serum from diabetic patients and the culture media of human embryos. The optode membranes were formulated using polyvinyl chloride (PVC) as the polymer matrix and 4',5'-dibromofluorescein octadecyl ester (ETH 7075) as the chromoionophore. The sensitivity of the optode membranes was optimized using two different plasticizers (tricresyl phosphate-TCP and nitrophenyloctyl ether-NOPE) and three ionophores (nitrophenylboronic acid-NPBA, trifluorophenyboronic acid-TFPBA, 4'-nitrobenzo-15-crown-5) and tested for glucose detection. The best optode membrane was formulated from 49.5% PVC, 49.5% TCP, 1% NPBA, and 1% ETH 7075. It showed a linear dynamic range of 10^-3 M to 10^-1 M, with a detection limit of 9 × 10^-4 M and a response time of 2 min. The detection mechanism involves H-bonding between NPBA and glucose, which was confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR). The reaction also involves the formation of boronate esters in basic media with deprotonation of the chromoionophore (ETH 7075), leading to a decrease in UV-Vis absorbance at λmax = 530 nm. The membrane optode was used for glucose determination in synthetic culture medium, commercial embryo culture medium (GLOBAL^® TOTAL^® W/HEPES), and serum from normal and diabetic patients, showing good accuracy and precision of the optode.

A Novel Solid-State PVC-Membrane Potentiometric Dopamine-Selective Sensor Based on Molecular Imprinted Polymer

A novel solid-state polyvinylchloride (PVC) membrane potentiometric dopamine-selective microsensor was constructed based upon dopamine-imprinted polymer used as the ionophore in the membrane structure. The optimum membrane composition was determined as 4% (w/w) MIP, 69% (w/w) bis(2-ethylhexyl) sebacate (DOS), 26% (w/w) PVC, and 1% (w/w) potassiumtetrakis(4-chlorophenyl) borate (KTpClPB). The detection limit of the microsensor was determined to be 3.71×10-7 mol.L-1. The microsensor exhibited a super-Nernstian response for dopamine over the concentration range of 10-6-10-1 mol.L-1, with a short response time (<15 s) and a slope of 60.3±1.3 mV per decade (R2: 0.9998) over seven weeks. The microsensor was effectively performed in a pH range of 4.0-8.0 and a temperature range of 5-30 °C. The microsensor has been successfully demonstrated for the rapid, accurate, selective and reproducible determination of dopamine in pharmaceutical formulations with the recovery of 104.3-104.8%. The obtained results were in good harmony with the UV-Vis results at a confidence level of 95%.

Umbelliferyloxymethyl phosphonate compounds-weakly binding zinc ionophores with neuroprotective properties

Umbelliferone is a member of the coumarin family of compounds which are known for diverse pharmacological activity including in targets relevant to Alzheimers disease, AD. The toxicity associated with some forms of the amyloid protein, Aβ, and the role of Zn2+ (and other biometals) dyshomeostasis in this, are of great interest in AD and make metal ionophore capability desirable in so called multi target drug ligands MTDLs. A new series of umbelliferyloxymethyl phosphonic acid diethylester compounds (umbelliferyloxymethyl phosphonates) bearing a phosphonate at the 7-position (compounds 1, 3-6), hydrolysis products 2, 2a and 2b from 1 and analogues 7 and 8 of 1 with 7-O to 7-S and 1-O to 1-NH substitutions, are reported. Single crystal X-ray structures of compounds 1, 2 and 2a were determined. In terms of neuroprotective properties, the compounds 1, 2, 3, 4, 5 and 6 at 1 μM concentration, inhibited the toxicity of Aβ1-42 (Aβ42) in both toxic Amyloid Derived Diffusible Ligand (ADDL) and fibrillar (fibril) forms towards rat hippocampal cells. Compound 7 displayed cytotoxicity and 8 failed to inhibit Aβ42 toxicity. Concerning compound-metal ionophore activity (assessed using chemical experiments), despite weak binding to Zn2+ determined from 31P NMR titration of 1 and 2 by ZnCl2, compounds 1, 3, 4, 5 and 6 demonstrated ionophore assisted partition of Zn2+ from water to octanol at micromolar concentrations with efficacy on a par with or better than the chelator MTDL clioquinol (5-chloro-7-iodo-8-hydroxyquinoline). Partition was assessed using furnace Atomic Absorption Spectroscopy (AAS). In further experiments interaction of compound 1 with Zn2+ or it's pathways was inferred by (i) delayed fluorescence response with added Zn2+ in cells treated with FluoZin-3 and (ii) by suppression of Zn2+ promoted aggregation of Aβ42.

Recent Advances in Bioactive Artificial Ionophores

Several life-threatening diseases, also known as 'Channelopathies' are linked to irregularities in ion transport proteins. Significant research efforts have fostered the development of artificial transport systems that facilitates to restore the functions of impaired natural transport proteins. Indeed, a few of these artificial ionophores demonstrate the rare combination of transmembrane ion transport and important biological activity, offering early promises of suitability in 'channel replacement therapy'. In this review, structural facets and functions of both cationophores and anionophores are discussed. Ionophores that are toxic to various bacteria and yeast, could be exploited as antimicrobial agent. Nevertheless, few non-toxic ionophores offer the likelihood of treating a wide range of genetic diseases caused by the gene mutations. In addition, their ability to disrupt cellular homeostasis and to alter lysosomal pH endow ionophores as promising candidates for cancer treatment. Overall, critically outlining the advances in artificial ionophores in terms of in vitro ion transport, possible modes of action and biological activities enables us to propose possible future roadmaps in this research area.

Potentiometric Surfactant Sensor Based on 1,3-Dihexadecyl-1H-benzo[d]imidazol-3-ium for Anionic Surfactants in Detergents and Household Care Products

A 1,3-dihexadecyl-1H-benzo[d]imidazol-3-ium-tetraphenylborate (DHBI-TPB) ion-pair implemented in DHBI-TPB surfactant sensor was used for the potentiometric quantification of anionic surfactants in detergents and commercial household care products. The DHBI-TPB ion-pair was characterized by FTIR spectroscopy and computational analysis which revealed a crucial contribution of the C-H∙∙∙π contacts for the optimal complex formation. The DHBI-TPB sensor potentiometric response showed excellent analytical properties and Nernstian slope for SDS (60.1 mV/decade) with LOD 3.2 × 10^-7 M; and DBS (58.4 mV/decade) with LOD 6.1 × 10^-7 M was obtained. The sensor possesses exceptional resistance to different organic and inorganic interferences in broad pH (2-10) range. DMIC used as a titrant demonstrated superior analytical performances for potentiometric titrations of SDS, compared to other tested cationic surfactants (DMIC > CTAB > CPC > Hyamine 1622). The combination of DHBI-TPB sensor and DMIC was successfully employed to perform titrations of the highly soluble alkane sulfonate homologues. Nonionic surfactants (increased concentration and number of EO groups) had a negative impact on anionic surfactant titration curves and a signal change. The DHBI-TPB sensor was effectively employed for the determination of technical grade anionic surfactants presenting the recoveries from 99.5 to 101.3%. The sensor was applied on twelve powered samples as well as liquid-gel and handwashing home care detergents containing anionic surfactants. The obtained results showed good agreement compared to the outcomes measured by ISE surfactant sensor and a two-phase titration method. The developed DHBI-TPB surfactant sensor could be used for quality control in industry and has great potential in environmental monitoring.

Rethinking Ion Transport by Ionophores: Experimental and Computational Investigation of Single Water Hydration in Valinomycin-K+ Complexes

Valinomycin is a macrocyclic ionophore that transports K⁺ across hydrophobic membranes. Its function depends on selectivity, capture, transport, and release of the ion. While thermodynamics clearly indicate that valinomycin binds K⁺ preferentially over all other alkali ions, characterizing the capture/transport/release of K⁺ by valinomycin at the molecular level remains a challenge. The bracelet-like structure of valinomycin-K⁺ (K⁺VM) has the ion completely enveloped, facilitating transport through the cell membrane. We report that hydration by a single water molecule, (K⁺VM)(H₂O), produces three different conformers, identified by infrared spectroscopy and supporting computational studies. For two minor conformers, the water prevents the ionophore from closing, a conformation that would inhibit diffusion through the membrane. However, the dominant conformer encloses both the ion and the water, replicating the bracelet-like K⁺VM and arguably enhancing diffusion through the membrane. This potential for active participation of water in transport through the hydrophobic cellular membrane has never been previously considered.

Photoactivatable Fluorophore for Stimulated Emission Depletion (STED) Microscopy and Bioconjugation Technique for Hydrophobic Labels

The use of photoactivatable dyes in STED microscopy has so far been limited by two-photon activation through the STED beam and by the fact that photoactivatable dyes are poorly solvable in water. Herein, we report ONB-2SiR, a fluorophore that can be both photoactivated in the UV and specifically de-excited by STED at 775 nm. Likewise, we introduce a conjugation and purification protocol to effectively label primary and secondary antibodies with moderately water-soluble dyes. Greatly reducing dye aggregation, our technique provides a defined and tunable degree of labeling, and improves the imaging performance of dye conjugates in general.

LipiSensors: Exploiting Lipid Nanoemulsions to Fabricate Ionophore-Based Nanosensors

Ionophore-based nanosensors (IBNS) are tools that enable quantification of analytes in complex chemical and biological systems. IBNS methodology is adopted from that of bulk optodes where an ion exchange event is converted to a change in optical output. While valuable, an important aspect for application is the ability to intentionally tune their size with simple approaches, and ensure that they contain compounds safe for application. Lipidots are a platform of size tunable lipid nanoemulsions with a hydrophobic lipid core typically used for imaging and drug delivery. Here, we present LipiSensors as size tunable IBNS by exploiting the Lipidot model as a hydrophobic structural support for the sensing moieties that are traditionally encased in plasticized PVC nanoparticles. The LipiSensors we demonstrate here are sensitive and selective for calcium, reversible, and have a lifetime of approximately one week. By changing the calcium sensing components inside the hydrophobic core of the LipiSensors to those sensitive for oxygen, they are also able to be used as ratiometric O₂ sensitive nanosensors via a quenching-based mechanism. LipiSensors provide a versatile, general platform nanosensing with the ability to directly tune the size of the sensors while including biocompatible materials as the structural support by merging sensing approaches with the Lipidot platform.

Synthesis and Anticancer Activity of Dimeric Polyether Ionophores

Polyether ionophores represent a group of natural lipid-soluble biomolecules with a broad spectrum of bioactivity, ranging from antibacterial to anticancer activity. Three seem to be particularly interesting in this context, namely lasalocid acid, monensin, and salinomycin, as they are able to selectively target cancer cells of various origin including cancer stem cells. Due to their potent biological activity and abundant availability, some research groups around the world have successfully followed semi-synthetic approaches to generate original derivatives of ionophores. However, a definitely less explored avenue is the synthesis and functional evaluation of their multivalent structures. Thus, in this paper, we describe the synthetic access to a series of original homo- and heterodimers of polyether ionophores, in which (i) two salinomycin molecules are joined through triazole linkers, or (ii) salinomycin is combined with lasalocid acid, monensin, or betulinic acid partners to form 'mixed' dimeric structures. Of note, all 11 products were tested in vitro for their antiproliferative activity against a panel of six cancer cell lines including the doxorubicin resistant colon adenocarcinoma LoVo/DX cell line; five dimers (14-15, 17-18 and 22) were identified to be more potent than the reference agents (i.e., both parent compound(s) and commonly used cytostatic drugs) in selective targeting of various types of cancer. Dimers 16 and 21 were also found to effectively overcome the resistance of the LoVo/DX cancer cell line.

Plasticizer-Free Thin-Film Sodium-Selective Optodes Inkjet-Printed on Transparent Plastic for Sweat Analysis

A novel strategy to functionalize transparent flexible plastic films with an optical ion-sensing layer using an inkjet-printing technology is described. The hydrophobic sensing chemicals that include a sodium ionophore, a lipophilic proton chromoionophore, and a lipophilic ion-exchanger are co-deposited onto substrates such as transparent polyester film sheets in the absence of any plasticizer and/or hydrophobic polymer matrix. The inkjet-printing process enables the formation of optode films with nanoscale thickness/roughness that readily facilitate interfacing with aqueous samples. Using a smartphone detector, the colorimetric response of the optodes is shown to reach 95% of equilibrium values within 100 s in response to different concentrations of sodium ions, which is more rapid than traditional ion-selective optodes based on plasticized PVC films as the sensing layer. The new optodes also exhibit high selectivity to Na⁺ over interfering ions including K⁺, Ca²⁺, and Mg²⁺. Chemical leaching experiments show that the highly hydrophobic optode components remain in place on the plastic substrate surface. Hence, excellent sensor stability and fully reversible optical responses are obtained, which is essential for potential continuous monitoring applications. Further testing of the sensors with undiluted human sweat samples is shown to yield accurate values for sodium concentrations. Therefore, the use of plasticizer-free ion-selective optode nanolayers that enable highly selective ion sensing on a clear plastic support is likely to expand the range of available chemical sensors suited for preparing wearable real-time sweat analysis devices.

Electrochemical Quantitative Assessment of Labetalol Hydrochloride in Pure Form and Combined Pharmaceutical Formulations

This work describes how to utilize the electrochemical technique to determine labetalol hydrochloride (Lab) in pure form and combined pharmaceutical formulation for quality control purposes. Four membrane sensors were developed using two plasticizers, dioctyl phthalate with 2-hydroxypropyl-?-cyclodextrin and ammonium reineckate (RNC) for sensors 1a and 2a, and tributyl phthalate with 2-hydroxypropyl-?-cyclodextrin and ammonium reineckate for sensors 1b and 2b as ionophores in polyvinyl chloride (PVC) matrix. Fast response and stable Nernstian slopes of 59.60, 57.58, 53.00 and 55.00 mV/decade for sensors 1a, 2a, 1b, and 2b, respectively, were obtained by developed sensors within a concentration range 10-4 M-10-2 M over pH range 2.00-5.10. Developed sensors showed good selectivity for Lab in pure form, in the presence of co-administered drugs, many of interfering ions, and excipients present in pharmaceutical formulation. No remarkable difference was detected upon the statistical comparison between the results of proposed sensors and the official method.

How Valinomycin Ionophores Enter and Transport K+ across Model Lipid Bilayer Membranes

Valinomycin, a cyclic peptide, was incorporated into a biomimetic lipid membrane tethered to the surface of a gold (111) electrode. Electrochemical impedance spectroscopy was used to study the ionophore properties of the peptide, and polarization modulation infrared reflection absorption spectroscopy was employed to determine the conformation and orientation of valinomycin in the membrane. The combination of these two techniques provided unique information about the ionophore mechanism where valinomycin transports ions across the membrane by creating a complex with potassium ions and forming an ion pair with a counter anion. The ion pair resides within the hydrophobic fragment of the membrane and adopts a small angle of ∼22° with respect to the surface normal. This novel study provides new insights explaining the valinomycin ion transport mechanism in model biological membranes.

Behavior of ionophore antibiotics in aquatic environments in Argentina: The distribution on different scales in water courses and the role of wetlands in depuration

We studied for the first time three ionophore anticoccidial drugs: monensin (MON), lasalocid (LAS), and salinomycin (SAL) as emerging pollutants originating from animal and plant husbandry in surface waters (n = 89) in one of the most extensive hydrological basins in South América (Del Plata basin). The soluble fraction of ionophores was pretreated by solid-phase extraction and analyzed by LC-MS/MS at a limit of detection of 1.7 ng·L^-1. A statistical approach noted the need to report parameters calculated by methods based on the number of observations and the censorship percentage over substitution methods for more precise estimations of environmental data with a high percentage of left-censored data. Water collectors adjacent to intensive-husbandry facilities, placed in direct runoffs from animal excreta, or in wastewater emissions contained median concentrations of MON and SAL approximately 70 times higher than those found in regional tributaries and main courses of 5 sub-basins of the pampas and mesopotamic regions, thus exhibiting a relevance to other similar agricultural pollutants widely reported as pesticides. Chemical speciation of these compounds in surface water was characterized especially for MON and SAL, where the pH and chemical oxygen demand of the natural water body was associated with the concentration of the soluble fraction. The concentrations in abundant rivers such as the Gualeguay deliver a contribution to a natural wetland such as the Paraná-River delta, which registered only one sample with a [MON] ≤ the limit of quantification. Since wetlands possess a limited removal capability, these affluent contributions recorded strongly indicate that attention must be paid to the development of guidelines involving quality criteria for assessing the impact of ionophore antibiotics on such ecosystems.

Comparative study of β-cyclodextrin, γ-cyclodextrin and 4-tert-butylcalix[8]arene ionophores as electroactive materials for the construction of new sensors for trazodone based on host-guest recognition

BACKGROUND

Trazodone (TRZ) is a second-generation non-tricyclic antidepressant derived from a triazolopyridine derivative, which is mainly used to treat emotional disorders and conditions related to depressive disorders.

PURPOSE

This study investigated the design, development and characteristics of polyvinyl chloride (PVC) membrane sensors for trazodone HCl (TRZ).

METHODS

The developed sensing membranes were constructed using β-cyclodextrin (β-CD; sensor 1), γ-cyclodextrin (γ-CD; sensor 2) or 4-tert-butylcalix[8]arene (t-BC8; sensor 3) ionophores as sensing materials in addition to ionic sites and dioctyl phthalate in the PVC matrix.

RESULTS

Sensors 1, 2 and 3 displayed fast, stable and near-Nernstian response over a relatively wide trazodone concentration range (7.0×10-6-1×10-3, 5.0×10-5-1×10-3and 8.0×10-6-1.0×10-3 M, respectively), with detection limits of 2.2×10-6, 1.5×10-5 and 2.42×10-6 M, respectively in the pH range of 3.0-6.0. The sensors demonstrated good selectivity for TRZ in the presence of different ionic compounds. The accuracy and precision of the proposed sensors were assessed by the determination of 40.7 μg/ml of TRZ, which showed average recoveries of 99.6%, 99.1% and 98.5% with mean relative standard deviations of 2.4%, 2.5% and 2.6% for sensor 1, 2 and 3 respectively. Molecular modeling was used to calculate the host-guest binding energy. The lowest free binding energy was -6.243, -5.752 and -5.7105 kcal/mol for 1:1 stoichiometry host-guest complexes of trazodone and β-CD, γ-CD and t-BC8, respectively, which was in-line with a Nernstian response.

CONCLUSION

The investigated methods can be applied for the determination of TRZ in pharmaceutical preparations. The results of investigated dosage-form of TRZ show good agreement with those using the US Pharmacopeia method.

Terrosamycins A and B, Bioactive Polyether Ionophores from Streptomyces sp. RKND004 from Prince Edward Island Sediment

Terrosamycins A (1) and B (2), two polycyclic polyether natural products, were purified from the fermentation broth of Streptomyces sp. RKND004 isolated from Prince Edward Island sediment. The one strain-many compounds (OSMAC) approach coupled with UPLC-HRMS-based metabolomics screening led to the identification of these compounds. The structure of 1 was determined from analysis of NMR, HRMS, and X-ray diffraction data. NMR experiments performed on 2 revealed the presence of two methoxy groups replacing two hydroxy groups in 1. Like other polyether ionophores, 1 and 2 exhibited excellent antibiotic activity against Gram-positive pathogens. Interestingly, the terrosamycins also exhibited activity against two breast cancer cell lines.

Housefly larvae (Musca domestica) significantly accelerates degradation of monensin by altering the structure and abundance of the associated bacterial community

Vermicomposting of livestock manure using housefly larvae is a promising biotechnology for waste reduction and control of antibiotic pollution. Monensin (MON), an ionophore polyether antibiotic (IPA), is widely used in broiler feed to control coccidiosis. However, MON residues in litter have become a major source of pollution in the environment. In this work, we studied the efficiency of housefly larvae (Musca domestica) on monensin attenuation during a 12-day laboratory scale vermicomposting experiment. We observed a 94.99% reduction in MON concentration after four days in treatment groups, while it took twelve days to remove more than 94.71% of MON in the control group. We found that the bacterial community composition of the substrate was reshaped by housefly larvae. From the treatment groups, three MON-degrading bacterial strains were isolated and identified as Acinetobacter sp., Stenotrophomonas sp. and Alcaligenes sp. based on 16 S rRNA gene sequence analysis. These three strains were among dominant the bacteria in treated substrates, showing between 52.80% and 89.25% degradation of MON in mineral salt medium within 28 days. Furthermore, two MON-degrading bacteria (Stenotrophomonas sp. and Alcaligenes sp.) were more abundant in treatment groups and larvae gut groups compared with those in control groups. The abundance enhancement of MON-degrading bacteria was related to the change in ambient temperature and pH in the substrates, which were affected by housefly larvae activities. Our results confirm that housefly larvae can significantly accelerate degradation of MON in chicken manure by increasing the abundance of MON-degrading bacteria.

Single-Piece Solid Contact Cu2+-Selective Electrodes Based on a Synthesized Macrocyclic Calix[4]arene Derivative as a Neutral Carrier Ionophore

Herein, a facile route leading to good single-walled carbon nanotubes (SWCNT) dispersion or poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) based single-piece nanocomposite membrane is proposed for trace determination of Cu²⁺ ions. The single-piece solid contact Cu²⁺-selective electrodes were prepared after drop casting the membrane mixture on the glassy-carbon substrates. The prepared potentiometric sensors revealed a Nernstian response slope of 27.8 ± 0.3 and 28.1 ± 0.4 mV/decade over the linearity range 1.0 × 10^-3 to 2.0 × 10^-9 and 1.0 × 10^-3 to 1.0 × 10^-9 M with detection limits of 5.4 × 10^-10 and 5.0 × 10^-10 M for sensors based on SWCNTs and PEDOT/PSS, respectively. Excellent long-term potential stability and high hydrophobicity of the nanocomposite membrane are recorded for the prepared sensors due to the inherent high capacitance of SWCNT used as a solid contact material. The sensors exhibited high selectivity for Cu²⁺ ions at pH 4.5 over other common ions. The sensors were applied for Cu²⁺ assessment in tap water and different tea samples. The proposed sensors were robust, reliable and considered as appealing sensors for copper (II) detection in different complex matrices.

Diphenylethylenediamine-Based Potent Anionophores: Transmembrane Chloride Ion Transport and Apoptosis Inducing Activities

Synthetic anion transporters have been recognized as one of the potential therapeutic agents for the treatment of diseases including cystic fibrosis, myotonia, and epilepsy that originate due to the malfunctioning of natural Cl^- ion transport systems. Recent studies showed that the synthetic Cl^- ion transporters can also disrupt cellular ion-homeostasis and induce apoptosis in cancer cell lines, leading to a revived attention for synthetic Cl^- ion transporters. Herein, we report the development of conformationally controlled 1,2-diphenylethylenediamine-based bis(thiourea) derivatives as a new class of selective Cl^- ion carrier. The strong Cl^- ion binding properties ( K_d = 3.87-6.66 mM) of the bis(thiourea) derivatives of diamine-based compounds correlate well with their transmembrane anion transport activities (EC₅₀ = 2.09-4.15 nM). The transport of Cl^- ions via Cl^-/NO₃^- antiport mechanism was confirmed for the most active molecule. Perturbation of Cl^- ion homeostasis by this anion carrier induces cell death by promoting the caspase-mediated intrinsic pathway of apoptosis.

Calixarene-doped PVC polymeric films as size-selective optical sensors: Monitoring of salicylate in real samples

Preparation of novel salicylate-selective optical sensors (bulk optodes) was performed and applied successfully for salicylate determination in pharmaceutical formulations, Aspirin® and Aspocid®. t-butyl calix[4]arene ionophore was incorporated in a plasticized poly (vinyl-chloride) membrane containing the chromoionophore ETH5294 (O₁) or ETH7075 (O₅). The optical response to salicylate was due to size-selective extraction of salicylate from the aqueous solution to the optode bulk through formation of hydrogen bond accompanied by chromoionophore protonation, that resulted in the optical response at 680 or 540 nm for O₁ or O₅, respectively. Reliable size-selectivity was measured for salicylate over other anions; The calculated selectivity coefficients of O₅ optode were found to be: -4.4, -2.0 and - 3.7 for iodide, benzoate and perchlorate, respectively. The hydrogen bonding mechanism and selectivity pattern were ensured and explained by IR and ¹H NMR spectroscopy. For the same purpose, a molecular recognition constant of β_sal=10^0.043 was calculated using sandwich membrane method, and its small value ensured that hydrogen bonding interaction is responsible for the optode response. The detection limits of O₁ and O₅ in salicylate buffered solutions were 9.0 × 10^-5 and 8.9 × 10^-5 M with response times of 5 and 3 min, respectively, and with very good reversibility. The practical utility of the developed sensors was ensured by salicylate determination in Aspirin® and Aspocid®. Beyond the observed analytical performance, the present work aims not only to effectively apply Calixarene without derivatization, but also to estimate the strength of the size-dependent hydrogen bonding and comprehensively study the interaction mechanism.

Manganese-52: applications in cell radiolabelling and liposomal nanomedicine PET imaging using oxine (8-hydroxyquinoline) as an ionophore

The ionophore 8-hydroxyquinoline (oxine) has been used to radiolabel cells and liposomal medicines with 111In and, more recently, 89Zr, for medical nuclear imaging applications. Oxine has also shown promising ionophore activity for the positron-emitting radionuclide 52Mn that should allow imaging of labelled cells and nanomedicines for long periods of time (>14 days). However, to date, the radiometal complex formed and its full labelling capabilities have not been fully characterised. Here, we provide supporting evidence of the formation of [52Mn]Mn(oxinate)2 as the metastable complex responsible for its ionophore activity. The cell labelling properties of [52Mn]Mn(oxinate)2 were investigated with various cell lines. The liposomal nanomedicine, DOXIL® (Caelyx) was also labelled with [52Mn]Mn(oxinate)2 and imaged in vivo using PET imaging. [52Mn]Mn(oxinate)2 was able to label various cell lines with moderate efficiency (15-53%), however low cellular retention of 52Mn (21-25% after 24 h) was observed which was shown not to be due to cell death. PET imaging of [52Mn]Mn-DOXIL at 1 h and 24 h post-injection showed the expected pharmacokinetics and biodistribution of this stealth liposome, but at 72 h post-injection showed a profile matching that of free 52Mn, consistent with drug release. We conclude that oxine is an effective ionophore for 52Mn, but high cellular efflux of the isotope limits its use for prolonged cell tracking. [52Mn]Mn(oxinate)2 is effective for labelling and tracking DOXIL in vivo. The release of free radionuclide after liposome extravasation could provide a non-invasive method to monitor drug release in vivo.

Keto-enol-based modification on piperlongumine to generate a potent Cu(II) ionophore that triggers redox imbalance and death of HepG2 cells

Altered redox status including higher levels of copper in cancer cells than in normal cells inspired many researchers to develop copper ionophores targeting this status. We have recently found that flavon-3-ol (3-HF) works as a potent Cu(II) ionophore by virtue of its keto-enol moiety. To further emphasize the significance of this moiety for developing Cu(II) ionophores, we herein designed a β-diketo analog of piperlongumine, PL-I, characterized by the presence of high proportion of the keto-enol form in dimethylsulfoxide and chloroform, and identified its keto-enol structure by NMR and theoretical calculations. Benefiting from deprotonation of its enolic hydroxyl group, this molecule is capable of facilitating the transport of Cu(II) through cellular membranes to disrupt redox homeostasis of human hepatoma HepG2 cells and trigger their death.

Bis(1-pyrenylmethyl)-2-benzyl-2-methyl-malonate as a Cu2+ Ion-Selective Fluoroionophore

A new malonate possessing two pyrene moieties was synthesized as a fluoroionophore, and its structure and fluorescence spectroscopic properties were investigated. When excited at 344 nm in acetonitrile/chloroform (9:1, v/v), the synthesized bispyrenyl malonate has the fluorescence of intramolecular excimer (λ_em = 467 nm) emissions and not a pyrene monomer emission (λ_em = 394 nm). A large absolute fluorescence quantum yield was obtained in the solid state (Φ_PL = 0.65) rather than in solution (Φ_PL = 0.13). X-ray crystallography analysis clarified the molecular structure and alignment of the bispyrenyl malonate in the crystal phase, elucidating its fluorescence spectroscopic properties. Such analysis also suggests there are intramolecular C-H···π interactions and intermolecular π···π interactions between the pyrenyl rings. Interestingly, the synthesized bispyrenyl malonate exhibits excellent fluorescence sensing for the Cu²⁺ ion. Remarkable fluorescence intensity enhancement was only observed with the addition of the Cu²⁺ ion.

Monitoring and modulating ion traffic in hybrid lipid/polymer vesicles

Controlling the traffic of molecules and ions across membranes is a critical feature in a number of biologically relevant processes and highly desirable for the development of technologies based on membrane materials. In this paper, ion transport behavior of hybrid lipid/polymer membranes was studied in the absence and presence of ion transfer agents. A pH-sensitive fluorophore was used to investigate ion (H⁺/OH^-) permeability across hybrid lipid/polymer membranes as a function of the fraction of amphiphilic block copolymer. It was observed that vesicles with intermediate lipid/polymer ratios tend to be surprisingly more permeable to ion transport than the pure lipid or pure polymer vesicles. Hybrid vesicle permeability could be further modulated with valinomycin, nigericin, or gramicidin A, which significantly expedite the dissipation of externally-imposed pH gradients by facilitating the transport of the rate-limiting co-ions (e.g. K⁺) ions across the membrane. For gramicidin A, ion permeability decreased with increasing polymer mole fraction, and the method of introduction of gramicidin A into the membrane played an important role. Strategies to incorporate biofunctional molecules and facilitate their activity in synthetic systems are highly desirable for developing artificial organelles or other synthetic compartmentalized structures requiring control over molecular traffic across biomimetic membranes.

Structural basis, chemical driving forces and biological implications of flavones as Cu(II) ionophores

A main biochemical property of cancer cells, compared with normal cells, is altered redox status including increased levels of copper to maintain their malignant phenotypes. Thus, increasing copper accumulation, by using ionophores, to disrupt abnormal redox homeostasis of cancer cells may be an important anticancer strategy. Naturally occurring molecules with extraordinarily diverse chemical scaffolds are an important source of inspiration for developing copper ionophores. Dietary flavonoids are well-characterized copper chelators and show cancer chemopreventive potential, but their ionophoric role for redox-active copper and the related biological implications have remained unknown. This study reports, for the first time, the structural basis, chemical driving forces and biological implications of flavones (a widely distributed subgroup of flavonoids) as Cu(II) ionophores, and also provides new insights into cancer chemopreventive mechanism of flavones bearing 3(or 5)-hydroxy-4-keto group. 3-Hydroxyflavone surfaced as a potent Cu(II) ionophore to induce the mitochondria-dependent apoptosis of cancer cells in a redox intervention fashion via sequential proton-loss Cu(II) chelation, GSH-driving releasing of copper and protonation-dependent efflux of the neutral ligand.

Steric and Stereochemical Modulation in Pyridyl- and Quinolyl-Containing Ligands

Nitrogen-containing pyridine and quinoline are outstanding platforms on which excellent ionophores and sensors for metal ions can be built. Steric and stereochemical effects can be used to modulate the affinity and selectivity of such ligands toward different metal ions on the coordination chemistry front. On the signal transduction front, such effects can also be used to modulate optical responses of these ligands in metal sensing systems. In this review, steric modulation of achiral ligands and stereochemical modulation in chiral ligands, especially ionophores and sensors for zinc, copper, silver, and mercury, are examined using published structural and spectral data. Although it might be more challenging to construct chiral ligands than achiral ones, isotropic and anisotropic absorption signals from a single chiroptical fluorescent sensor provide not only detection but also differentiation of multiple analytes with high selectivity.

Ionophore-based potentiometric PVC membrane sensors for determination of phenobarbitone in pharmaceutical formulations

The fabrication and development of two polyvinyl chloride (PVC) membrane sensors for assaying phenobarbitone sodium are described. Sensors 1 and 2 were fabricated utilizing β- or γ-cyclodextrin as ionophore in the presence of tridodecylmethylammonium chloride as a membrane additive, and PVC and dioctyl phthalate as plasticizer. The analytical parameters of both sensors were evaluated according to the IUPAC guidelines. The proposed sensors showed rapid, stable anionic response (-59.1 and -62.0 mV per decade) over a relatively wide phenobarbitone concentration range (5.0 × 10-6-1 × 10-2 and 8 × 10-6-1 × 10-2 mol L-1) in the pH range of 9-11. The limit of detection was 3.5 × 10-6 and 7.0 × 10-6 mol L-1 for sensors 1 and 2, respectively. The fabricated sensors showed high selectivity for phenobarbitone over the investigated foreign species. An average recovery of 2.54 μg mL-1 phenobarbitone sodium was 97.4 and 101.1 %, while the mean relative standard deviation was 3.0 and 2.1 %, for sensors 1 and 2, respectively. The results acquired for determination of phenobarbitone in its dosage forms utilizing the proposed sensors are in good agreement with those obtained by the British Pharmacopoeial method.

Estimation of environmentally relevant chemical properties of veterinary ionophore antibiotics

Monensin (MON) and salinomycin (SAL), known as polyether ionophore antibiotics (IPAs), are extensively used in livestock industry and can enter the environment via animal manure and agricultural runoff. Although some studies have investigated the environmental fate and transformation of IPAs, the lack of information on IPAs' aqueous-phase chemical properties is a major hindrance for further in-depth research. This study was able to experimentally determine the acidity constants (pKa), metal-complex dissociation constants (Kdiss), and intrinsic aqueous solubility of MON species, and some of these properties of SAL. The pKa value of MON was found to be 4.5, close to other aliphatic carboxylic acids and the predicted value by the computer program ChemAxon. The metal-complex dissociation constants of MON were estimated to be 0.058 and 0.573 with sodium ion (Na(+)) and potassium ion (K(+)), respectively. The Kdiss value of SAL with sodium ion was found to be 1.31. Compared to the previous values determined in organic solvents, the Kdiss of MON in aqueous phase are several orders of magnitude higher but maintain the same relative selectivity toward metal ions (Na(+) versus K(+)). The determined pKa and Kdiss values were also used to assess the aqueous solubility limits of different IPA species under different pH and metal ion concentrations. Results from this study provide more accurate information for the properties of IPAs. The obtained constants can be applied to predict the speciation of IPAs in various aquatic systems and help shed light on the environmental fate of IPAs.

Effects of Lipid Tethering in Extremophile-Inspired Membranes on H(+)/OH(-) Flux at Room Temperature

This work explores the proton/hydroxide permeability (PH+/OH-) of membranes that were made of synthetic extremophile-inspired phospholipids with systematically varied structural elements. A fluorescence-based permeability assay was optimized to determine the effects on the PH+/OH- through liposome membranes with variations in the following lipid attributes: transmembrane tethering, tether length, and the presence of isoprenoid methyl groups on one or both lipid tails. All permeability assays were performed in the presence of a low concentration of valinomycin (10 nM) to prevent buildup of a membrane potential without artificially increasing the measured PH+/OH-. Surprisingly, the presence of a transmembrane tether did not impact PH+/OH- at room temperature. Among tethered lipid monolayers, PH+/OH- increased with increasing tether length if the number of carbons in the untethered acyl tail was constant. Untethered lipids with two isoprenoid methyl tails led to lower PH+/OH- values than lipids with only one or no isoprenoid tails. Molecular dynamics simulations revealed a strong positive correlation between the probability of observing water molecules in the hydrophobic core of these lipid membranes and their proton permeability. We propose that water penetration as revealed by molecular dynamics may provide a general strategy for predicting proton permeability through various lipid membranes without the need for experimentation.

Transformation of ionophore antimicrobials in poultry litter during pilot-scale composting

Ionophores are the second top selling class of antimicrobials used in food-producing animals in the United States. In chickens, ionophores are used as feed additives to control coccidiosis; up to 80% of administered ionophores are excreted in the litter. Because poultry litter is commonly used to fertilize agricultural fields, ionophore residues in litter have become contaminants of emerging concern. This study aims to develop a liquid chromatography with tandem mass spectrometry (LC-MS/MS) method to quantify ionophores, and identify their transformation products (TPs) in poultry litter after on-farm pilot-scale composting. The validation parameters of the optimized method showed good accuracy, ranging from 71 to 119% recovery and relative standard deviation (precision) of ≤19% at three different concentration levels (10, 50 and 100 μg/kg). Monensin, salinomycin and narasin, were detected in the poultry litter samples prior to composting at 290.0 ± 40, 426 ± 46, and 3113 ± 318 μg kg(-1), respectively. This study also aims to investigate the effect of different composting conditions on the removal of ionophores, such as the effect of turning or aeration. Results revealed a 13-68% reduction in ionophore concentrations after 150 d of composting, depending on whether the compost was aerated, turned, or subjected to a combination of both aeration and turning. Three transformation products and one metabolite of ionophores were identified in the composted litter using high-resolution liquid chromatography with quadrupole time-of-flight mass spectrometry (LC-QToF/MS).

Cation-Controlled Excimer Packing in Langmuir-Blodgett Films of Hemicyanine Amphiphilic Chromoionophores

Supramolecular structure of ultrathin films of hemicyanine dye bearing a crown ether group (CrHCR) was tuned by lateral pressure and investigated by means of compression isotherms, UV-vis and fluorescence spectroscopies, and X-ray reflectivity. Two different types of aggregation were revealed, depending on the absence or the presence of metal cations in the water subphase. While CrHCR forms at high surface pressures head-to-tail stacking aggregates on pure water, changing the subphase to a metal-cation-containing one leads to the appearance of well-defined excimers with head-to-head orientation. The structure of monolayers transferred onto solid supports by the Langmuir-Blodgett (LB) technique was examined by use of X-ray reflectivity measurements and molecular modeling. A model of cation-induced excimer formation in hemicyanine Langmuir monolayers is proposed. Finally, fluorescence emission properties of LB films of CrHCR can be managed by appropriate changes in the subphase composition, this last one determining the type of chromophore aggregation.

Paper-based plasticizer-free sodium ion-selective sensor with camera phone as a detector

An ionophore-based ion-selective optode platform on paper is described for the first time with a sodium optode as the example. Cellulose paper is shown to be an excellent substrate for adsorption of the required chromoionophore, ionophore, and ion-exchanger species. These adsorbed components form a hydrophobic phase that enables heterogeneous optical ion sensing in the absence of any plasticizer or organic polymer phase.

Direct Generation of Triketide Stereopolyads via Merged Redox-Construction Events: Total Synthesis of (+)-Zincophorin Methyl Ester

(+)-Zincophorin methyl ester is prepared in 13 steps (longest linear sequence). A bidirectional redox-triggered double anti-crotylation of 2-methyl-1,3-propane diol directly assembles the triketide stereopolyad spanning C4-C12, significantly enhancing step economy and enabling construction of (+)-zincophorin methyl ester in nearly half the steps previously required.

Spectroscopic studies of the equilibrium between complexes of lasalocid acid with propargylamine and metal cations

The molecular structure of 1:1 complex formed between the naturally occurring polyether ionophore, called lasalocid acid (LAS) and propargylamine (PROP) is studied by X-ray, FT-IR, (1)H NMR, (13)C NMR and ESI-MS methods. The complex formed between deprotonated LAS acid and protonated PROP molecule is stabilized by intra- and inter-molecular hydrogen bonds. The protons of the protonated amine group are hydrogen bonded to etheric and hydroxyl oxygen atoms of the LAS anion. The similarity of the FT-IR spectra of the LAS-PROP complex in solid state and in solution demonstrated that the molecular structures of the complex in both states are comparable. It is shown that LAS in solution can form concurrent complexes with metal cations (M=Li(+), Na(+), K(+)) and amine existing in equilibrium. Analysis of the structures of lasalocid complexes is important for a better understanding of the antibacterial and anticancer properties of lasalocid acid.

Inhibition and biotransformation potential of veterinary ionophore antibiotics under different redox conditions

Veterinary ionophore antibiotics (IPAs) are polyether compounds used extensively in the livestock industry to promote animal growth and prevent coccidia infection. However, the environmental fate and impact of IPAs are not fully understood. In this study, the inhibition and biotransformation potential of the most commonly used IPAs, monensin (MON) and salinomycin (SAL), were investigated under well-defined aerobic, nitrate-reducing, fermentative/sulfate-reducing, and fermentative/methanogenic conditions. Batch assays were conducted with mixed cultures developed from poultry litter (PL), PL-fertilized soil, and municipal anaerobic sludge. Significant transformation of MON and SAL was observed in aerobic, low-buffer capacity culture series as a result of abiotic acid-catalyzed IPAs hydrolysis induced by nitrification. Biotransformation of IPAs was the main transformation process in aerobic, high-buffer capacity culture series. MON persisted under fermentative/sulfate-reducing conditions, whereas SAL was transformed by fermentative bacteria. Both MON and SAL were stable under nitrate-reducing and methanogenic conditions. At IPAs concentrations up to 1 mg/L, MON inhibited only methanogenesis, whereas SAL did not impact any of the biological processes investigated in this study. Multiple, new primary IPA biotransformation products were observed on LC/MS, and their molecular structures were tentatively identified by analyzing LC/MS/MS fragmentation patterns. Overall, MON and SAL exhibited different inhibition and biotransformation patterns at each redox condition tested, which could greatly influence their fate and impact upon their release into the environment as a result of agricultural activities.

Photodegradation of veterinary ionophore antibiotics under UV and solar irradiation

The veterinary ionophore antibiotics (IPAs) are extensively used as coccidiostats and growth promoters and are released to the environment via land application of animal waste. Due to their propensity to be transported with runoff, IPAs likely end up in surface waters where they are subject to photodegradation. This study is among the first to investigate the photodegradation of three commonly used IPAs, monensin (MON), salinomycin (SAL) and narasin (NAR), under UV and solar irradiation. Results showed that MON was persistent in a deionized (DI) water matrix when exposed to UV and sunlight, whereas SAL and NAR could undergo direct photolysis with a high quantum yield. Water components including nitrate and dissolved organic matter had a great impact on the photodegradation of IPAs. A pseudosteady state kinetic model was successfully applied to predict IPAs' photodegradation rates in real water matrices. Applying LC/MS/MS, multiple photolytic transformation products of IPAs were observed and their structures were proposed. The direct photolysis of SAL and NAR occurred via cleavage on the ketone moiety and self-sensitized photolysis. With the presence of nitrate, MON was primarily degraded by hydroxyl radicals, whereas SAL showed reactivity toward both hydroxyl and nitrogen-dioxide radicals. Additionally, toxicity tests showed that photodegradation of SAL eliminated its antibiotic properties against Bacillus subtilis.

Membrane sensors based on Schiff bases as chelating ionophores--a review

The development of chemical sensors has received widespread attention during the past two decades because of their extensive use in environmental monitoring and clinical analysis via rapid, accurate, reproducible, and low-cost methods. Chemically modified CPEs have frequently been employed as potentiometric sensors in trace analysis for metal ions, organic pollutants and biological substances. Most of these electrodes are operated via the ion-exchange process of the active component incorporated into the carbon paste matrix. This review article concentrates on such achievements in the context of the general development across the field. An overview of potentiometric sensors that are capable of detecting metal ions in environmental samples is presented and discussed. A survey on important advances in potentiometric sensors with regard to high selectivity, lower detection limit, and fast response time is presented in this review article.

Site-specific modification of the anticancer and antituberculosis polyether salinomycin by biosynthetic engineering

The complex bis-spiroacetal polyether ionophore salinomycin has been identified as a uniquely selective agent against cancer stem cells and is also strikingly effective in an animal model of latent tuberculosis. The basis for these important activities is unknown. We show here that deletion of the salE gene abolishes salinomycin production and yields two new analogues, in both of which the C18C19 cis double bond is replaced by a hydroxy group stereospecifically located at C19, but which differ from each other in the configuration of the bis-spiroacetal. These results identify SalE as a novel dehydratase and demonstrate that biosynthetic engineering can be used to redirect the reaction cascade of oxidative cyclization to yield new salinomycin analogues for use in mechanism-of-action studies.

A selective potentiometric copper (II) ion sensor based on the functionalized ZnO nanorods

In this work, ZnO nanorods were hydrothermally grown on the gold-coated glass substrate and characterized by field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) techniques. The ZnO nanorods were functionalized by two different approaches and performance of the sensor electrode was monitored. Fourier transform infrared spectroscopy (FTIR) was carried out for the confirmation of interaction between the ionophore molecules and ZnO nanorods. In addition to this, the surface of the electrode was characterized by X-ray photoelectron spectroscopy (XPS) showing the chemical and electronic state of the ionophore and ZnO nanorod components. The ionophore solution was prepared in the stabilizer, poly vinyl chloride (PVC) and additives, and then functionalized on the ZnO nanorods that have shown the Nernstian response with the slope of 31 mV/decade. However, the Cu2+ ion sensor was fabricated only by immobilizing the selective copper ion ionophore membrane without the use of PVC, plasticizers, additives and stabilizers and the sensor electrode showed a linear potentiometric response with a slope of 56.4 mV/decade within a large dynamic concentration range (from 1.0 x 10(-6) to 1.0 x 10(-1) M) of copper (II) nitrate solutions. The sensor showed excellent repeatability and reproducibility with response time of less than 10 s. The negligible response to potentially interfering metal ions such as calcium (Ca2+), magnesium (Mg2+), potassium (K+), iron (Fe3+), zinc (Zn2+), and sodium (Na+) allows this sensor to be used in biological studies. It may also be used as an indicator electrode in the potentiometric titration.

Zinc ionophore activity of quercetin and epigallocatechin-gallate: from Hepa 1-6 cells to a liposome model

Labile zinc, a tiny fraction of total intracellular zinc that is loosely bound to proteins and easily interchangeable, modulates the activity of numerous signaling and metabolic pathways. Dietary plant polyphenols such as the flavonoids quercetin (QCT) and epigallocatechin-gallate act as antioxidants and as signaling molecules. Remarkably, the activities of numerous enzymes that are targeted by polyphenols are dependent on zinc. We have previously shown that these polyphenols chelate zinc cations and hypothesized that these flavonoids might be also acting as zinc ionophores, transporting zinc cations through the plasma membrane. To prove this hypothesis, herein, we have demonstrated the capacity of QCT and epigallocatechin-gallate to rapidly increase labile zinc in mouse hepatocarcinoma Hepa 1-6 cells as well as, for the first time, in liposomes. In order to confirm that the polyphenols transport zinc cations across the plasma membrane independently of plasma membrane zinc transporters, QCT, epigallocatechin-gallate, or clioquinol (CQ), alone and combined with zinc, were added to unilamellar dipalmitoylphosphocholine/cholesterol liposomes loaded with membrane-impermeant FluoZin-3. Only the combinations of the chelators with zinc triggered a rapid increase of FluoZin-3 fluorescence within the liposomes, thus demonstrating the ionophore action of QCT, epigallocatechin-gallate, and CQ on lipid membrane systems. The ionophore activity of dietary polyphenols may underlay the raising of labile zinc levels triggered in cells by polyphenols and thus many of their biological actions.

Comparison of triple quadrupole mass spectrometry and Orbitrap high-resolution mass spectrometry in ultrahigh performance liquid chromatography for the determination of veterinary drugs in sewage: benefits and drawbacks

This paper presents a comparison of triple quadrupole tandem mass spectrometry (MS/MS) and Orbitrap high-resolution mass spectrometry (HRMS) combined to ultrahigh performance liquid chromatography for the determination of glucocorticoids and polyether ionophores in sewage, in order to show the major benefits and drawbacks for each mass spectrometry analyser. Overall, HRMS measurements have enhanced performance in terms of confirmatory capabilities than MS/MS measurements. Moreover, similar limits of quantification, limits of detection, linear range and repeatability for glucocorticoids with both the MS/MS and HRMS methods were compared, but in the case of polyether ionophores, slightly better limits of detection and limits of quantification were obtained with the HRMS method because of the high sensitivity obtained when diagnostic ions are used for quantification instead of selected reaction monitoring transitions for these compounds. The two methods have been applied to the analysis of several influent and effluent sewage samples from sewage treatment plants located in the Tarragona region (Catalonia, Spain), showing an excellent correlation between the two methods.

A novel potentiometric sensor for determination of neurotoxin β-N-oxalyl-L-α, β-diaminopropionic acid

A novel potentiometric sensor based on ionophore (Cd(NH2CH2CH2OCH2CH2OCH2CH2NH2)Ag3(CN)5) for the determination of β-N-oxalyl-L-α, β-diaminopropionic acid (ODAP) is developed. The ODAP-selective membrane sensor demonstrates high sensitivity and short response time. The detection limit of the ODAP-selective membrane sensor is about 2 × 10(-6) mol L (-1) and the response time is shorter than 6 s. The linear dynamic range of the ODAP-selective membrane sensor is between ODAP concentrations of 1.0 × 10(-2) and 1 × 10(-6) mol L (-1). The ODAP-selective membrane sensor exhibits good operational stability for at least one week in dry conditions at 4-6°C. It has a reproducible and stable response during continuous work for at least 10 h with a relative standard deviation of 0.28% (n = 18).

Application of fluorescence spectroscopy using a novel fluoroionophore for quantification of zinc in urban runoff

Fluorescence spectroscopy has great potential for on-site and real-time monitoring of pollutants in aquatic environments; however, its application to environmental aquatic samples has been extremely limited. In this study, a novel fluoroionophore based on a BODIPY-terpyridine conjugate was developed and applied to determine Zn concentrations in urban runoff. The fluoroionophore selectively bound to Zn(2+) in water, which led to an instant red-shift of the fluorescence peak of the fluoroionophore from 539 nm to 567 nm that could be seen by the naked eye. Zn concentrations could be quantified using the ratio of fluorescence intensities, and the detection limit was 9 μg/L, which is sufficiently low for environmental aquatic samples. To demonstrate applicability of the method to environmental samples, we measured Zn concentrations in urban runoff samples with a complex matrix (∼60 mg/L dissolved organic carbon and ∼20 mS/cm electrical conductivity). The total and dissolved fractions of Zn in the samples could be determined by fluorescence spectroscopy and its relative error was estimated to be less than 30% by inductively coupled plasma-atomic emission spectroscopy analysis. The proposed method is rapid and easy-to-use with simple pretreatment for Zn determination in environmental aquatic samples with complex matrices.

Abiotic degradation of antibiotic ionophores

Hydrolytic and photolytic degradation were investigated for the ionophore antibiotics lasalocid, monensin, salinomycin, and narasin. The hydrolysis study was carried out by dissolving the ionophores in solutions of pH 4, 7, and 9, followed by incubation at three temperatures of 6, 22, and 28 °C for maximum 34 days. Using LC-MS/MS for chemical analysis, lasalocid was not found to hydrolyse in any of the tested environments. Monensin, salinomycin, and narasin were all stable in neutral or alkaline solution but hydrolysed in the solution with a pH of 4. Half-lives at 25 °C were calculated to be 13, 0.6, and 0.7 days for monensin, salinomycin, and narasin, respectively. Absorbance spectra from each compound indicated that only lasalocid is degraded by photolysis (half-life below 1 h) due to an absorbance maximum around 303 nm, and monensin, salinomycin, and narasin are resistant to direct photolysis because they absorb light of environmentally irrelevant wavelengths.