Selenium Heterocyclic Electron Acceptor with Small Urbach Energy for As-Cast High-Performance Organic Solar Cells

Highly Efficient Acceptors with a Nonaromatic Thianthrene Central Core for Organic Photovoltaics

Despite the great role in determining molecular packings and organic photovoltaic outcomes, very rare candidates could be employed as central cores in current high-performance acceptors except diimide-based moieties. Herein, a new type of central core of nonaromatic thianthrene is explored firstly, affording an exotic but structurally tailorable molecular platform for acceptor design. A unique puckered rather than planar conformation of central core is adopted, caused by the 4n πe- feature, great ring strain and largely the insufficient p-π orbital overlap of lone pair on sulfur of thianthrene and coterminous benzene planes. As a result, the absorption of thianthrene-based acceptors (CS1, CS2, and CS3) shows unexpected blue shift comparing to the phenazine-based counterpart (CH20), regardless of the intrinsically strong electron-donating characteristic of low valence sulfur atoms. Even so, the desired molecular packing and fibrillary film morphology, assisted by the suitable chlorination on thianthrene, still contribute to the best device efficiency of 19.0% based on D18:CS2 blends. Such novel work renders an underdeveloped NFA platform with the potentials for achieving PCE of over 20%.

Fine-Tuning of Alkyl Side Chains in Ultra-Low Bandgap Polymers To Effectively Suppress the Dark Current for Short-Wavelength Infrared Organic Photodetectors

Short-wavelength infrared organic photodetectors (SWIR OPDs) have great potential for applications in health monitoring, night vision, optical communication, and image sensing. However, the development of SWIR OPDs is limited by challenges in achieving high responsivity (R) and detectivity (D*) due to the exponentially increased nonradiative recombination rate when decreasing the bandgap of conjugated polymers or molecules. In this study, we designed and synthesized a series of donor-acceptor (D-A) type ultralow bandgap (≤0.85 eV) polymers containing [1,2,5]thiadiazolo[3,4-g]quinoxaline (TQ) units as the A unit and selenophene units as the D unit, respectively. The solubility, molecular stacking, charge transport properties, and film morphology of the polymers were finely tuned by varying the side chain lengths on the substituted phenyl groups of TQ units. It was found that the polymer PTQOD with 2-octyldodecyl alkyl chains has lower nonradiative recombination losses and lower trap state density. After device optimization, the PTQOD-based device achieved higher R and lower dark current density (Jd), resulting in a D* of 1.06 × 1010 Jones at 1300 nm under 0 V bias, representing the highest value for OPDs using TQ-based polymers. This work highlights the importance of optimizing the alkyl chains of ultralow-band gap polymer donor materials and provides a promising approach for developing highly sensitive SWIR OPDs.

O, S, and N Bridged Atoms Screening on 2D Conjugated Central Units of High-Performance Acceptors

Almost all of central cores in high-performance acceptors are limited to the electron-withdrawing diimide structure currently, which constrains further acceptor structural innovation greatly. Herein, oxygen (O), sulfur (S), and nitrogen (N) atoms are adopted to bridge the 2D conjugated central cores, yielding three acceptor platforms of CH─O, CH─S, and CH─N that differ in structure by only two atoms. Because of the characteristic atomic outer electron configuration and hybrid orbital orientation, O-, S-, and N-bridged central cores display quite different conformations and electronic properties, namely, dibenzodioxin (planar, non-aromatic), thianthrene (puckered, non-aromatic) and phenazine (planar, aromatic), respectively. A systematic investigation discloses how the central core, especially its p-π orbital overlap between lone pair on O/S/N and coterminous benzene planes, affect the intrinsic photoelectronic properties of acceptors for the first time. Finally, CH─N-based binary device affords the highest fill factor of 83.13% in organic photovoltaics along with a first-class efficiency of 20.23%. By evaluating the strictly controlled O-, S-, and N-bridged molecular platforms comprehensively, the work reveals the potential uniqueness of diimide in determining the excellent photovoltaic outcomes of acceptors.

Multiple-Asymmetric Molecular Engineering Enables Regioregular Selenium-Substituted Acceptor with High Efficiency and Ultra-low Energy Loss in Binary Organic Solar Cells

Asymmetric molecular engineering is utilized for developing efficient small molecular acceptors (SMAs), whereas adopting multiple asymmetric strategies at the terminals, side chains, and cores of efficient SMAs remains a challenge, and effects on reducing energy loss (Eloss) have been rarely investigation. Herein, four regioregular multiple-asymmetric SMAs (DASe-4F, DASe-4Cl, TASe-2Cl2F, and TASe-2F2Cl) are constructed by delicately manipulating the number and position of F and Cl on end groups. Triple-asymmetric TASe-2F2Cl not only exhibits a unique and most compact 3D network crystal stacking structure but also possesses excellent crystallinity and electron mobility in neat film. Surprisingly, the PM1:TASe-2F2Cl-based binary organic solar cells (OSCs) yield a champion power conversion efficiencies (PCEs) of 19.32%, surpassing the PCE of 18.27%, 17.25%, and 16.30% for DASe-4F, DASe-4Cl, and TASe-2Cl2F-based devices, which attributed to the optimized blend morphology with proper phase separation and more ordered intermolecular stacking and excellent charge transport. Notably, the champion PCE of 19.32% with ultralow nonradiative recombination energy loss (ΔE3) of 0.179 eV marks a record-breaking result for selenium-containing SMAs in binary OSCs. Our innovative multiple-asymmetric molecular engineering of precisely modulating the number and position of fluorinated/chlorinated end groups is an effective strategy for obtaining highly-efficient and minimal ΔE3 of selenium-substituted SMAs-based binary OSCs simultaneously.

Minimizing Energy Loss by Designing Multifunctional Solid Additives to Independent Regulation of Donor and Acceptor Layers for Efficient LBL Polymer Solar Cells

Solid additives are crucial in layer-by-layer (LBL) polymer solar cells (PSCs). Despite its importance, the simultaneous application of solid additives into both donor and acceptor layers has been largely overlooked. In this work, two multifunctional solid additives are actively designed, and investigated the synergistic effect on both donor and acceptor layers. Incorporating the multifunctional solid additives into the donor layer could effectively enhance the aggregation and molecular stacking of the donor polymer, leading to reduced energy disorder and minimizing ΔE2. When the multifunctional solid additives are introduced into the acceptor layer, they just play a role in optimizing the morphology, thereby reducing the ΔE3. Excitedly, the simultaneous addition of the multifunctional solid additives into both donor and acceptor layers produced a synergistic effect for decreasing ΔE2 and ΔE3 simultaneously, especially adding SA2, thus enabling an excellent power conversion efficiency (PCE) of 19.95% (certified as 19.68%) with an open-circuit voltage (Voc) of 0.921 V, a short circuit current density (Jsc) of 27.08 mA cm-2 and a fill factor (FF) of 79.98%. The work highlights the potential of multifunctional solid additives in independently regulating the properties of donor and acceptor layers, which is expected as a promising approach for further developing higher performance PSCs.

Sulfur-Doped ZnO as Cathode Interlayer for Efficient Inverted Organic Solar Cells

Bulk heterojunction (BHJ) organic solar cells (OSCs) represent a promising technology due to their cost-effectiveness, lightweight design and potential for flexible manufacturing. However, achieving a high power conversion efficiency (PCE) and long-term stability necessitates optimizing the interfacial layers. Zinc oxide (ZnO), commonly used as an electron extraction layer (EEL) in inverted OSCs, suffers from surface defects that hinder device performance. Furthermore, the active control of its optoelectronic properties is highly desirable as the interfacial electron transport and extraction, exciton dissociation and non-radiative recombination are crucial for optimum solar cell operation. In this regard, this study investigates the sulfur doping of ZnO as a facile method to effectively increase ZnO conductivity, improve the interfacial electron transfer and, overall, enhance solar cell performance. ZnO films were sulfur-treated under various annealing temperatures, with the optimal condition found at 250 °C. Devices incorporating sulfur-doped ZnO (S-ZnO) exhibited a significant PCE improvement from 2.11% for the device with the pristine ZnO to 3.14% for the OSC based on the S-ZnO annealed at 250 °C, attributed to an enhanced short-circuit current density (Jsc) and fill factor (FF). Optical and structural analyses revealed that the sulfur treatment led to a small enhancement of the ZnO film crystallite size and an increased n-type transport capability. Additionally, the sulfurization of ZnO enhanced its electron extraction efficiency, exciton dissociation at the ZnO/photoactive layer interface and exciton/charge generation rate without altering the film morphology. These findings highlight the potential of sulfur doping as an easily implemented, straightforward approach to improving the performance of inverted OSCs.

Efficient Infrared-Detecting Organic Semiconductors Featuring a Tetraheterocyclic Core with Reduced Ionization Potential

Infrared organic semiconductors are crucial in organic optoelectronics, yet high-performance materials with photoresponse beyond 1.1 μm (the limit of crystalline silicon) remain scarce due to the limit of building blocks including strong electron-donating units. Here, we report an asymmetric tetraheterocycle (TPCT) with a reduced ionization potential of 6.18 eV relative to those reported dithiophene-based electron-donating blocks, and TPCT-2F and TPCTO-2F constructed with TPCT as the core exhibit absorption onset up to 1 μm and 1.4 μm, respectively. Especially, TPCTO-2F possesses a narrow band gap of 1.00 eV and displays a small Urbach energy of 22.0 meV comparable to or even lower than those of some typical inorganic short-wave infrared (SWIR) semiconductors (13-44 meV). The organic photodetectors (OPDs) based on TPCT-2F achieve a peak detectivity (D*) of 2.2×1013 Jones at 810 nm under zero bias, among the highest values for reported OPDs and on par with commercial silicon photodetectors. Impressively, TPCTO-2F-based OPDs demonstrate a wide response from 0.3 to 1.4 μm and high D* comparable to germanium photodetector at wavelengths <1.2 μm with a maximum D* of 2.3×1011 Jones at 1.06 μm in SWIR region.

BODIPY-Coumarin Triad as Acceptor for Ternary Nonfullerene Solar Cells with over 15% Efficiency

Herein, a new nonfused fullerene-free acceptor is synthesized based on the BODIPY-coumarin triad, BDP-2C, which exhibits a medium optical bandgap of about 1.51 eV, and HOMO and LUMO energy levels of about -5.50 and -4.00 eV, respectively. Employing BDP-2C as a guest component in PM6:Y6, the resulting optimized ternary organic solar cells (OSCs) attained a power conversion efficiency (PCE) of about 15.09% with a low energy loss of 0.503 eV. The balanced charge transport and suppressed charge recombination, shorter charge extraction time, and prolonged charge carrier lifetime are the factors that enhance the PCE of ternary OSCs.

Transparent and Conductive Polyimide-Ionene Hybrid Interlayers for High Performance and Cost-Effective Semitransparent Organic Solar Cells

The contradiction between high transmittance and favorable conductivity poses a great challenge in developing effective cathode interlayer (CIL) materials with sufficient thickness tolerance, which hinders the further advancement of organic solar cells (OSCs). Herein, a completely new class of alcohol processable polyimide-ionene hybrids (PIIHs) is proposed by melding pyromellitic diimide (PMD) subunits into imidazolium-based ionenes backbone covalently. These PIIHs, named PMD-DI and PMD-PD, boast high transparency, suitable energy levels, and decent conductivity. A higher PMD content endows PMD-PD with improved work function tunability, electrical properties, and crystallinity, enabling PMD-PD as CIL material with excellent thickness-insensitive characteristics, while simultaneously improving device stability significantly. Furthermore, PMD-PD also exhibits good compatibility with various electrodes and active layers, offering solar cell efficiencies of up to 19.91% and 19.29% with Ag and Cu cathodes, respectively. More importantly, the application of PMD-PD can improve the performance of semi-transparent OSCs without losing transmittance, thereby drastically enhancing the light utilization efficiency to 4.04% with an ultrathin, low-cost Cu cathode, that competes with leading optical modulation-free semitransparent OSCs with expensive Ag cathodes. This work opens a pathway to realize transparent and conductive interlayers by strategic molecular design, leading to highly efficient, stable, and cost-effective OSCs suitable for diverse applications.

Electron-Rich Heptacyclic S,N Heteroacene Enabling C-Shaped A-D-A-type Electron Acceptors With Photoelectric Response beyond 1000 Nm for Highly Sensitive Near-Infrared Photodetectors

A highly electron-rich S,N heteroacene building block is developed and condensed with FIC and Cl-IC acceptors to furnish CT-F and CT-Cl, which exhibit near-infrared (NIR) absorption beyond 1000 nm. The C-shaped CT-F and CT-Cl self-assemble into a highly ordered 3D intermolecular packing network via multiple π-π interactions in the single crystal structures. The CT-F-based organic photovoltaic (OPV) achieved an impressive efficiency of 14.30% with a broad external quantum efficiency response extending from the UV-vis to the NIR (300-1050 nm) regions, outperforming most binary OPVs employing NIR A-D-A-type acceptors. CT-Cl possesses a higher surface energy than CT-F, promoting vertical phase segregation and resulting in its preferential accumulation near the bottom interface of the blend. This arrangement, combined with the lower HOMO energy level of CT-Cl, effectively reduces undesired hole and electron injection under reverse voltage. The PM6:CT-Cl-based organic photodetectors (OPDs) devices achieved an ultra-high shot-noise-limited specific detectivity (Dsh*) values exceeding 1014 Jones in the NIR region from 620 to 1000 nm, reaching an unprecedentedly high value of 1.3 × 1014 Jones at 950 nm. When utilizing a 780 nm light source, the PM6:CT-Cl-based OPDs show record-high rise/fall times of 0.33/0.11 µs and an exceptional cut-off frequency (f-3dB) of 590 kHz at -1 V.

Weak Near-Infrared Light Visualization Enabled by Smart Multifunctional Optoelectronics

Visualizing weak NIR light is critical for sensing, imaging, and communication, but remains challenging due to inefficient detection and upconversion (UC) mechanisms. A smart NIR-to-visible photon-UC organic optoelectronic device is reported that integrates photodetection, light-emitting diode (LED), and photovoltaic capabilities to enable clear visualization of weak NIR light. The programmable device has continuous photodetection monitoring of the incident NIR intensity. When the incident intensity falls below a preset threshold, the LED function is automatically triggered to compensate for the UC emission, amplifying the visualization. The smart multifunctional device uses a carefully designed ternary bulk heterojunction sensitizer doped with rubrene:DBP as the emitter. It demonstrates high UC efficiency (>1.5%) for upconversion from 808 to 608 nm, allowing NIR visualization without external power under strong illumination. It also shows excellent NIR photodetection with photoresponsivity of 0.35 A W-1 at 800 nm and specific detectivity reaching 10¹2-10¹3 Jones, enabling sensitive detection under low-light conditions. It also exhibits a low turn-on voltage (0.9 V) and luminance exceeding 1200 cd m- 2 at 5 V, ensuring energy-efficient light compensation. Furthermore, it achieves >10% power conversion efficiency, enabling sustainable self-powered operation. This multifunctional, high-performance system offers great potential in sensing, energy harvesting, and display technologies.

Preparation of Dual-Asymmetric Acceptors via Selenium Substitution Combined with Terminal Group Optimization Strategy for High Efficiency Organic Solar Cells

Improving both the open-circuit voltage (VOC) and short-circuit current density (JSC) through the development of photovoltaic materials to achieve high power conversion efficiency (PCE) is critical and a significant challenge for organic solar cells (OSCs). Here, we designed novel dual-asymmetric acceptors A-SSe-TCF and A-SSe-LSF by simultaneously asymmetrically regulating the backbone and terminal groups and investigated their synergistic effects on photovoltaic performance in comparison with the monoasymmetric acceptor A-SSe-4F. The dual-asymmetric acceptors exhibit broader spectral absorption and larger half-molecule dipole moment differences, which favored the enhancement of JSC and the reduction of energy loss (Eloss). Among the binary blends, PM6:A-SSe-TCF exhibits superior phase separation, vertical phase distribution morphology, and more ordered π-π stacking compared to PM6:A-SSe-LSF and PM6:A-SSe-4F. As a result, OSCs based on PM6:A-SSe-TCF achieved a higher PCE of 18.53% with both higher VOC and JSC due to the suppressed nonradiative recombination and enhanced charge extraction capabilities. Furthermore, by incorporating A-SSe-TCF as the third component, the PM6:L8-BO:A-SSe-TCF-based device achieves a champion PCE of 19.73% without VOC loss on account of the decrement of Eloss. The novel dual-asymmetric strategy provides new insights into the molecular design and the improvement of PCE for OSCs.

Fluorinated and methylated ortho-benzodipyrrole-based acceptors suppressing charge recombination and minimizing energy loss in organic photovoltaics

The elimination of the A' unit from -type Y6-derivatives has led to the development of a new class of ortho-benzodipyrrole (o-BDP)-based A-DNBND-A-type NFAs. In this work, two new A-DNBND-A-type NFAs, denoted as CFB and CMB, are designed and synthesized, where electron-withdrawing fluorine atoms and electron-donating methyl groups are substituted on the benzene ring of the o-BDP moiety, respectively. CFB exhibits a blue-shifted absorption spectrum, stronger intermolecular interactions, shorter π-π stacking distances, and more ordered 3D intermolecular packing in the neat and blend films, enabling it to effectively suppress charge recombination in the PM6:CFB device showing a higher PCE of 16.55% with an FF of 77.45%. CMB displays a higher HOMO/LUMO energy level, a smaller optical bandgap, and a less ordered 3D packing, which contributes to its superior ability to suppress energy loss in the PM6:CMB device with a high V oc of 0.90 V and a PCE of 16.46%. To leverage the advantages of CFB and CMB, ternary PM6:Y6-16:CFB and PM6:Y6-16:CMB devices are fabricated. The PM6:Y6-16:CFB device exhibits the highest PCE of 17.83% with an increased V oc of 0.86 V and a J sc of 27.32 mA cm-2, while the PM6:Y6-16:CMB device displayed an elevated V oc of 0.87 V and an improved FF of 74.71%, leading to a PCE of 17.44%. The high PCE was achieved using the non-halogenated greener solvent o-xylene, highlighting their potential for facilitating more eco-friendly processing procedures. C-shaped disubstituted o-BDP-based A-D-A type acceptors open up new avenues for tailoring electronic properties and molecular self-assembly, achieving higher OPV performance with enhanced charge recombination suppression and reduced energy loss.

Benzothiadiazole-Fused Cyanoindone: A Superior Building Block for Designing Ultra-Narrow Bandgap Electron Acceptor with Long-Range Ordered Stacking

There are great demands of developing ultra-narrow bandgap electron acceptors for multifunctional electronic devices, particularly semi-transparent organic photovoltaics (OPVs) for building-integrated applications. However, current ultra-narrow bandgap materials applied in OPVs, primarily based on electron-rich cores, exhibit defects of high-lying energy levels and inferior performance. We herein proposed a novel strategy by designing the benzothiazole-fused cyanoindone (BTC) unit with ultra-strong electron-withdrawing ability as the terminal to synthesize the acceptor BTC-2. The BTC unit imparts red-shifted absorption up to 1000 nm to BTC-2, attributed to enhanced intramolecular charge transfer and the quinoid resonance effect. Additionally, BTC-2 features deep-lying energy levels with the highest occupied molecular orbital level of -5.81 eV, due to the ultra-strong electron-withdrawing ability of BTC. Furthermore, BTC-2 exhibits long-range ordering in both molecular packing and macroscopic blend morphology, resulting from shoulder-to-shoulder packing of two BTC units, leading to an ultra-long exciton lifetime over 1.1 ns. These superiorities facilitated a 17.17 % efficiency in the binary OPV device with an extremely high photocurrent of 30.34 mA cm-2, representing the best performance for ultra-narrow bandgap electron acceptors, and a record light utilization efficiency of 4.88 % in binary semi-transparent systems. Overall, BTC is a superior building block for designing ultra-narrow bandgap electron acceptors.

Progress in research on organic photovoltaic acceptor materials

In the past two decades, organic solar cells (OSCs) have begun to attract attention as the efficiency of inorganic solar cells gradually approaches the theoretical limit. In the early development stage of OSCs, p-type conjugated polymers and n-type fullerene derivatives were the most commonly used electron donors and acceptors. However, with further research, the shortcomings of fullerene materials have become increasingly apparent. In recent years, non-fullerene acceptor materials, including small molecules and polymers, have emerged as promising alternatives to fullerene derivatives. This review summarizes various types of acceptor materials in OSCs and analyzes the advantages and disadvantages of each.

CF3-Functionalized Side Chains in Nonfullerene Acceptors Promote Electrostatic Interactions for Highly Efficient Organic Solar Cells

The advent of next-generation nonfullerene acceptors (NFAs) has propelled major advances in organic solar cells (OSCs). Here we report an NFA design incorporating CF3-terminated side chains having varying N-(CH2)n-CF3 linker lengths (n = 1, 2, and 3) which introduce new intermolecular interactions, hence strong modulation of the photovoltaic response. We report a systematic comparison and contrast characterization of this NFA series with a comprehensive set of chemical/physical techniques versus the heavily studied third-generation NFA, Y6, revealing distinctive and beneficial properties of this new NFA series. Single-crystal diffraction analyses reveal unusual two-dimensional mesh-like crystal structures, featuring strong interactions between the side chain CF3-terminal and NFA core F substituents. These atomistic and morphological features contribute to enhanced charge mobility and significantly enhanced photovoltaic performance. We show that varying the CF3-terminated side chain linker length strongly modulates light harvesting efficiency as well as charge recombination and the photovoltaic bandgap. The CF3-(CH2)2-based OSC demonstrates the most balanced performance metrics, achieving a remarkable 19.08% power conversion efficiency and an exceptional 80.09% fill-factor. These results imply that introducing CF3-terminated side chains into other OSC conjugated constituents may accelerate next-generation solar cell development.

A butterfly-shaped acceptor with rigid skeleton and unique assembly enables both efficient organic photovoltaics and high-speed organic photodetectors

It remains challenging to design efficient bifunctional semiconductor materials in organic photovoltaic and photodetector devices. Here, we report a butterfly-shaped molecule, named WD-6, which exhibits low energy disorder and small reorganization energy due to its enhanced molecular rigidity and unique assembly with strong intermolecular interaction. The binary photovoltaic device based on PM6:WD-6 achieved an efficiency of 18.41%. Notably, an efficiency of 19.42% was achieved for the ternary device based on PM6:BTP-eC9:WD-6. Moreover, the photodetection device based on WD-6 demonstrated an ultrafast response speed (205 ns response time at λ of 820 nm) and a high cutoff frequency of -3 dB (2.45 MHz), surpassing the values of most commercial Si photodiodes. Based on these findings, we showcased an application of the WD-6-based photodetection device in high-speed optical communication. These results offer valuable insights into the design of organic semiconductor materials capable of simultaneously exhibiting high photovoltaic and photodetective performance.

Fluorination Strategy for Benzimidazole Core Based Electron Acceptors Achieving over 19% Efficiency for Ternary Organic Solar Cells

The expansion of two-dimensional conjugated systems in nonfullerene electron acceptors (NFAs) has significantly advanced the molecular design and efficiency potential of organic solar cells (OSCs). This study introduces a novel class of NFAs featuring a benzimidazole core with varying degrees of peripheral fluorination, designated as YIS-4F, YIS-6F, and YIS-8F, respectively. Through systematic modulation of fluorine content, we observed that OSCs incorporating YIS-6F achieved the highest power conversion efficiency (PCE) of 17.28%, surpassing those with YIS-4F and YIS-8F. Notably, the incorporation of YIS-6F in a ternary blend with D18/N3 yielded a remarkable PCE of 19.43%. The enhanced performance of YIS-6F-based devices is attributed to the optimized energy level alignment and optimized crystallinity, which collectively facilitate efficient exciton dissociation, accelerated charge transport, and minimized charge recombination, culminating in an exceptional fill factor and PCE. Our findings underscore the pivotal role of fluorination of NFAs at the central benzimidazole core in optimizing molecular packing, and consequently enhancing the performance of OSCs.

Designing a Highly Crystalline Polymer Donor with Alkylsilyl and Fluorine Substitution to Achieve Efficient Ternary Organic Solar Cells

Adopting a ternary strategy is an effective approach to enhance the power conversion efficiency (PCE) in organic solar cells (OSCs). Previous research on highly efficient ternary systems has predominantly focused on those based on highly crystalline dual small molecule acceptors. However, limited attention has been given to ternary systems utilizing dual polymer donors. Herein, by incorporating the fluorine and alkylsilyl substitution, a new polymer donor named PX1 is developed, which demonstrates strong crystallinity and excellent miscibility with polymer PM6. Moreover, PX1 broadens and enhances the absorption properties of the PM6:L8-BO blends, and its molecular orbital energy level is situated between those of PM6 and L8-BO, highlighting its suitability as a third component. Introducing 20% PX1 into the PM6:L8-BO system resulted in a high PCE of 18.82%. PX1 effectively suppresses charge recombination and reduces energy losses, while also serving as a morphology modulator that enhances the crystallization and improves the molecular packing order of the active layer by shortening the π-π stacking distance and extending crystalline coherence length. These factors collectively contribute to the performance improvements in ternary devices. This study demonstrates that employing a dual polymer donor strategy is a promising approach for achieving high-performance ternary OSCs.

Elucidating the Advancement in the Optoelectronics Characteristics of Benzoselenadiazole-Based A2-D-A1-D-A2-Type Nonfullerene Acceptors for Efficient Organic Solar Cells

The potential applications of nonfullerene acceptors (NFAs) such as tunable band gaps, improved charge separation, wide-range absorption, enhanced power conversion efficiency, and operational stability make them highly favorable for organic photovoltaic applications. Herein, we designed eight novel structurally modified nonfused benzoselenadiazole (BSe)-based A2-D-A1-D-A2-type NFAs for efficient organic solar cells (OSCs). These newly modeled BSe-based NFA series contain BSe as the central core. We employed strong electron-withdrawing moieties at terminal acceptor A2 to further enhance the optical, optoelectronics, and photovoltaic characteristics of OSCs. These designed molecules (HNM1-HNM8) along with the synthetic reference molecule (HNM) were thoroughly characterized by using efficient and advanced quantum chemical simulation approaches. Thus, to ascertain the enhancement of both optical and photochemical response, a thorough density functional theory (DFT) study was carried out using the M062X level in association with the 6-31G(d,p) basis set. All of the investigated molecules (HNM1-HNM8) had their excited states calculated using the time-dependent density functional theory method. The newly designed molecules (HNM1-HNM8) presented narrower band gaps, improved absorption and optoelectronics properties, and reduced excitation and binding energies. The electrostatic potential, density of states, transition density matrix, ionization potential, and electron affinity analysis of this newly designed (HNM1-HNM8) series revealed a strong coherence with those of the reference HNM molecule. Electron density difference mapping allowed us to visualize the spatial movement of electrons between the donor and acceptor molecules during excitation. This insight helps us to understand the efficiency of charge separation and recombination processes that are critical for the performance of organic photovoltaics. The reorganization energy and charge transfer analysis suggests that HNM1-HNM8 molecules could act as NFAs for organic photovoltaic applications to enhance their efficiency further. The donor: acceptor charge transfer analysis was also carried out, which revealed that the PTB7-Th:HNM2 donor:acceptor complex shows a great charge transportation process at the donor-acceptor interface. Moreover, the photovoltaic analysis shows that the designed (HNM1-HNM8) NFA series has a great potential to produce improved open-circuit voltage and fill factor values, which may be helpful in enhancing the overall PCEs of the OSCs.

Delicate Regulation of Central Substituents Boosts Organic Photovoltaic Performance of Dimeric Acceptors

Dimeric acceptors are expected to satisfy both excellent power conversion efficiency (PCE) and operational stability of organic solar cells (OSCs). However, comparing to highly planar and symmetrical monomer-like acceptors, the quite different steric/spatial configurations of dimeric acceptors affect device outcomes greatly. Herein, on basis of the same dimeric molecular platform that constructed by bridging central units of two monomer-like acceptor, diverse substituents (─OCH3 for D1, ─CH3 for D2, and ─CF3 for D3) are grafted on central units to regulate the three dimensions (3D) geometries of dimeric acceptors delicately. A systematic investigation reveals the substituent-dependent variation of energy level, absorption, and molecular packing behavior. Consequently, D2 acceptor, characteristic of more favorable configuration, affords a superior film morphology and charge transfer/transport dynamics in resulting OSCs, thus yielding an excellent PCE of 17.50% along with a good long-term stability. This work manifests the crucially important role of central substituents in constructing high-performance dimeric acceptors.

Impact of Alkoxy Side Chains on the Quinoxaline-Based Electron Acceptors for Efficient Organic Solar Cells

In this work, three alkoxy-substituted quinoxaline core-based small-molecule acceptors (BQO-F, BQDO-F, and BQDO-Cl) are developed to elucidate the impact of ethoxy substituents on the physicochemical and photoelectric properties. Comparative analysis reveals that dialkoxy-substituted BQDO-F has a more planar molecular skeleton, a red-shifted absorption spectrum, upshifted energy levels, stronger crystallinity, and reduced energetic disorder compared to the monoalkoxy-substituted BQO-F. Although the replacement of fluorine atoms with chlorine atoms on the end-capped units of BQDO-F leads to a bathochromically shifted absorption spectrum, the resulting molecule BQDO-Cl shows worse π-π packing order compared to BQDO-F. Benefiting from the more favorable active layer morphology and improved carrier dynamics, the PBDB-T:BQDO-F-based organic solar cell achieves a much higher power conversion efficiency (PCE) of 16.41% compared to that of 14.48% obtained in the BQO-F-based device. In comparison with the BQDO-F-based device, the higher voltage loss of the BQDO-Cl-based device results in a lower PCE of 15.89%. The results clarify the effects of ethoxy substituents and end-capped substitutions of quinoxaline core-based small-molecule acceptors on efficient organic solar cells.

Sensitive SWIR Organic Photodetectors with Spectral Response Reaching 1.5 µm

The performance of organic photodetectors (OPDs) sensitive to the short-wavelength infrared (SWIR) light lags behind commercial indium gallium arsenide (InGaAs) photodetectors primarily due to the scarcity of organic semiconductors with efficient photoelectric responses exceeding 1.3 µm. Limited by the Energy-gap law, ultralow-bandgap organic semiconductors usually suffer from severe non-radiative transitions, resulting in low external quantum efficiency (EQE). Herein, a difluoro-substituted quinoid terminal group (QC-2F) with exceptionally strong electron-negativity is developed for constructing a new non-fullerene acceptor (NFA), Y-QC4F with an ultralow bandgap of 0.83 eV. This subtle structural modification significantly enhances intermolecular packing order and density, enabling an absorption onset up to 1.5 µm while suppressing non-radiation recombination in Y-QC4F films. SWIR OPDs based on Y-QC4F achieve an impressive detectivity (D*) over 1011 Jones from 0.4 to 1.5 µm under 0 V bias, with a maximum of 1.68 × 1012 Jones at 1.16 µm. Furthermore, the resulting OPDs demonstrate competitive performance with commercial photodetectors for high-quality SWIR imaging even under 1.4 µm irradiation.

Approaching 20% Efficiency in Ortho-Xylene Processed Organic Solar Cells by a Benzo[a]phenazine-Core-Based 3D Network Acceptor with Large Electronic Coupling and Long Exciton Diffusion Length

High-performance organic solar cells often rely on halogen-containing solvents, which restrict the photovoltaic industry. Therefore, it is imperative to develop efficient organic photovoltaic materials compatible with halogen-free solvents. Herein, a series of benzo[a]phenazine (BP)-core-based small-molecule acceptors (SMAs) achieved through an isomerization chlorination strategy is presented, comprising unchlorinated NA1, 10-chlorine substituted NA2, 8-chlorine substituted NA3, and 7-chlorine substituted NA4. Theoretical simulations highlight NA3's superior orbit overlap length and tight molecular packing, attributed to interactions between the end group and BP unit. Furthermore, NA3 demonstrates dense 3D network structures and a record electronic coupling of 104.5 meV. These characteristics empower the ortho-xylene (o-XY) processed PM6:NA3 device with superior power conversion efficiency (PCE) of 18.94%, surpassing PM6:NA1 (15.34%), PM6:NA2 (7.18%), and PM6:NA4 (16.02%). Notably, the significantly lower PCE in the PM6:NA2 device is attributed to excessive self-aggregation characteristics of NA2 in o-XY. Importantly, the incorporation of D18-Cl into the PM6:NA3 binary blend enhances crystallographic ordering and increases the exciton diffusion length of the donor phase, resulting in a ternary device efficiency of 19.75% (certified as 19.39%). These findings underscore the significance of incorporating new electron-deficient units in the design of efficient SMAs tailored for environmentally benign solvent processing of OSCs.

Design and Performance of Small-Molecule Donors with Donor-π-Acceptor Architecture Toward Vacuum-Deposited Organic Photovoltaics Having Heretofore Highest Short-Circuit Current Density

The development of high-performance organic photovoltaic materials is of crucial importance for the commercialization of organic solar cells (OSCs). Herein, two structurally simple donor-π-conjugated linker-acceptor (D-π-A)-configured small-molecule donors with methyl-substituted triphenylamine as D unit, 1,1-dicyanomethylene-3-indanone as A unit, and thiophene or furan as π-conjugated linker, named DTICPT and DTICPF, are developed. DTICPT and DTICPF are facilely prepared via a two-step synthetic process with simple procedures. DTICPF with a furan π-conjugated linker exhibits stronger and broader optical absorption, deeper highest occupied molecular orbital (HOMO) energy levels, and better charge transport, compared to its thiophene analog DTICPT. As a result, vacuum-deposited OSCs based on DTICPF: C70 show an impressive power conversion efficiency (PCE) of 9.36% (certified 9.15%) with short-circuit current density (Jsc) up to 17.49 mA cm-2 (certified 17.56 mA cm-2), which is the highest Jsc reported so far for vacuum-deposited OSCs. Besides, devices based on DTICPT: C70 and DTICPF: C70 exhibit excellent long-term stability under different aging conditions. This work offers important insights into the rational design of D-π-A configured small-molecule donors for high efficient and stable vacuum-deposited OSCs.

Fully Fused Indacenodithiophene-Centered Small-Molecule n-Type Semiconductors for High-Performance Organic Electronics

Developing novel n-type organic semiconductors is an on-going research endeavour, given their pivotal roles in organic electronics and their relative scarcity compared to p-type counterparts. In this study, a new strategy was employed to synthesize n-type organic semiconductors featuring a fully fused conjugated backbone. By attaching two sets of adjacent amino and formyl groups to the indacenodithiophene-based central cores and triggering a tandem reaction sequence of a Knoevenagel condensation-intramolecular cyclization, DFA1 and DFA2 were realized. The solution-processed organic field effect transistors based on DFA1 exhibited unipolar n-type transport character with a decent electron mobility of ca. 0.10 cm2 V-1 s-1 (ca. 0.038 cm2 V-1 s-1 for DFA2 based devices). When employing DFA1 as a third component in organic solar cells, a high power conversion efficiency of 19.2 % can be achieved in ternary devices fabricated with PM6 : L8-BO : DFA1. This work provides a new pathway in the molecular engineering of n-type organic semiconductors, propelling relevant research forward.

Manipulating Alkyl Inner Side Chain of Acceptor for Efficient As-Cast Organic Solar Cells

As-cast organic solar cells (OSCs) possess tremendous potential for low-cost commercial applications. Herein, five small-molecule acceptors (A1-A5) are designed and synthesized by selectively and elaborately extending the alkyl inner side chain flanking on the pyrrole motif to prepare efficient as-cast devices. As the extension of the alkyl chain, the absorption spectra of the films are gradually blue-shifted from A1 to A5 along with slightly uplifted lowest unoccupied molecular orbital energy levels, which is conducive for optimizing the trade-off between short-circuit current density and open-circuit voltage of the devices. Moreover, a longer alkyl chain improves compatibility between the acceptor and donor. The in situ technique clarifies that good compatibility will prolong molecular assembly time and assist in the preferential formation of the donor phase, where the acceptor precipitates in the framework formed by the donor. The corresponding film-formation dynamics facilitate the realization of favorable film morphology with a suitable fibrillar structure, molecular stacking, and vertical phase separation, resulting in an incremental fill factor from A1 to A5-based devices. Consequently, the A3-based as-cast OSCs achieve a top-ranked efficiency of 18.29%. This work proposes an ingenious strategy to manipulate intermolecular interactions and control the film-formation process for constructing high-performance as-cast devices.

What is the Limit Size of 2D Conjugated Extension on Central Units of Small Molecular Acceptors in Organic Solar Cells?

2D conjugated extension on central units of small molecular acceptors (SMAs) has gained great successes in reaching the state-of-the-art organic photovoltaics. Whereas the limit size of 2D central planes and their dominant role in constructing 3D intermolecular packing networks are still elusive. Thus, by exploring a series of SMAs with gradually enlarged central planes, it is demonstrated that, at both single molecular and aggerated levels, there is an unexpected blue-shift for their film absorption but preferable reorganization energies, exciton lifetimes and binding energies with central planes enlarging, especially when comparing to their Y6 counterpart. More importantly, the significance of well-balanced molecular packing modes involving both central and end units is first disclosed through a systematic single crystal analysis, indicating that when the ratio of central planes area/end terminals area is no more than 3 likely provides a preferred 3D intermolecular packing network of SMAs. By exploring the limit size of 2D central planes, This work indicates that the structural profiles of ideal SMAs may require suitable central unit size together with proper heteroatom replacement instead of directly overextending 2D central planes to the maximum. These results will likely provide some guidelines for future better molecular design.

20.2% Efficiency Organic Photovoltaics Employing a π-Extension Quinoxaline-Based Acceptor with Ordered Arrangement

Organic solar cells, as a cutting-edge sustainable renewable energy technology, possess a myriad of potential applications, while the bottleneck problem of less than 20% efficiency limits the further development. Simultaneously achieving an ordered molecular arrangement, appropriate crystalline domain size, and reduced nonradiative recombination poses a significant challenge and is pivotal for overcoming efficiency limitations. This study employs a dual strategy involving the development of a novel acceptor and ternary blending to address this challenge. A novel non-fullerene acceptor, SMA, characterized by a highly ordered arrangement and high lowest unoccupied molecular orbital energy level, is synthesized. By incorporating SMA as a guest acceptor in the PM6:BTP-eC9 system, it is observed that SMA staggered the liquid-solid transition of donor and acceptor, facilitating acceptor crystallization and ordering while maintaining a suitable domain size. Furthermore, SMA optimized the vertical morphology and reduced bimolecular recombination. As a result, the ternary device achieved a champion efficiency of 20.22%, accompanied by increased voltage, short-circuit current density, and fill factor. Notably, a stabilized efficiency of 18.42% is attained for flexible devices. This study underscores the significant potential of a synergistic approach integrating acceptor material innovation and ternary blending techniques for optimizing bulk heterojunction morphology and photovoltaic performance.

High Performance As-Cast Organic Solar Cells Enabled by a Refined Double-Fibril Network Morphology and Improved Dielectric Constant of Active Layer

High performance organic solar cells (OSCs) are usually realized by using post-treatment and/or additive, which can induce the formation of metastable morphology, leading to unfavorable device stability. In terms of the industrial production, the development of high efficiency as-cast OSCs is crucially important, but it remains a great challenge to obtain appropriate active layer morphology and high power conversion efficiency (PCE). Here, efficient as-cast OSCs are constructed via introducing a new polymer acceptor PY-TPT with a high dielectric constant into the D18:L8-BO blend to form a double-fibril network morphology. Besides, the incorporation of PY-TPT enables an enhanced dielectric constant and lower exciton binding energy of active layer. Therefore, efficient exciton dissociation and charge transport are realized in D18:L8-BO:PY-TPT-based device, affording a record-high PCE of 18.60% and excellent photostability in absence of post-treatment. Moreover, green solvent-processed devices, thick-film (300 nm) devices, and module (16.60 cm2) are fabricated, which show PCEs of 17.45%, 17.54%, and 13.84%, respectively. This work brings new insight into the construction of efficient as-cast devices, pushing forward the practical application of OSCs.

Empowering Photovoltaic Panel Anti-Icing: Superhydrophobic Organic Composite Coating with In Situ Photothermal and Transparency

Solar energy is widely used in photovoltaic power generation as a kind of clean energy. However, the liquid film, frosting, and icing on the photovoltaic module seriously limit the efficiency of photovoltaic power generation. We developed a composite coating (Y6-NanoSH) by combining an in situ photothermal and transparent Y6 organic film with a nanosuperhydrophobic material. The Y6-NanoSH coated glass exhibited excellent optical clarity both indoors and outdoors, indicating that the coating holds great promise in anti-icing applications for photovoltaic panels. The Y6-NanoSH coating absorbs very little visible light but instead absorbs in the near-infrared region, thereby emitting heat. When exposed to sunlight, the Y6-NanoSH coated photovoltaic panel raises its surface temperature, inhibiting the growth and accumulation of ice and frost on its surface. This is achieved through a combination of photothermal emission and superhydrophobic repellency, which promotes the evaporation and rolling away of water droplets. This validates our success in developing a photothermal, transparent, and superhydrophobic coating with excellent anti-icing capabilities, suitable for use on photovoltaic panels, as well as potential applications in car windscreens, transmission lines, curtain walls, and weather radomes.

Quinoxaline-based Y-type acceptors for organic solar cells

Minimizing energy loss plays a critical role in the quest for high-performance organic solar cells (OSCs). However, the origin of large energy loss in OCSs is complicated, involving the strong exciton binding energy of organic semiconductors, nonradiative charge-transfer state decay, defective molecular stacking network, and so on. The recently developed quinoxaline (Qx)-based acceptors have attracted extensive interest due to their low reorganization energy, high structural modification possibilities, and distinctive molecular packing modes, which contribute to reduced energy loss and superior charge generation/transport, thus improving the photovoltaic performance of OSCs. This perspective summarizes the design strategies of Qx-based acceptors (including small-molecule, giant dimeric and polymeric acceptors) and the resulting optoelectronic properties and device performance. In addition, the ternary strategy of introducing Qx-based acceptors as the third component to reduce energy loss is briefly discussed. Finally, some perspectives for the further exploration of Qx-based acceptors toward efficient, stable, and industry-compatible OSCs are proposed.

Unveiling the Potential of Two-Terminal Perovskite/Organic Tandem Solar Cells: Mechanisms, Status, and Challenges

Perovskite/organic tandem solar cells (PO-TSCs) demonstrate exceptional suitability for emerging applications such as building-integrated photovoltaics, wearable devices, and greenhouse farming. By leveraging the distinctive attributes of perovskite and organic materials, which encompass expanded solar spectrum utilization, chemically benign solubility, and soft nature, PO-TSCs position themselves as ideal candidates for high-performance semi-transparent photovoltaics (ST-PVs). Despite these advantages, their development significantly lags behind other perovskite-based counterparts, such as perovskite/perovskite, perovskite/silicon, and perovskite/Cu(In, Ga)Se2. To address existing challenges and unlock the full potential of PO-TSCs, an exploration of the fundamental mechanisms governing tandem photovoltaic devices is embarked. Delving into critical aspects such as charge generation/separation, energy level alignment, and material choices becomes pivotal for optimizing PO-TSC performance. The investigation of monolithic two-terminal PO-TSCs offers insights into achievements and barriers, recognizing the competitive landscape with other TSC counterparts. Further scrutiny of perovskite absorbers and organic absorbers in TSCs reveals strategies aimed at enhancing stability and efficiency. The discussion extends to interconnection layers, elucidating their role in optimizing light transmission and balancing carrier recombination. In conclusion, a compelling outlook on the dynamic landscape of PO-TSCs is presented, highlighting the remarkable efficiency progression and signaling their potential to revolutionize solar energy harvesting technologies.

Designing a Novel Wide Bandgap Small Molecule Guest for Enhanced Stability and Morphology Mediation in Ternary Organic Solar Cells with over 19.3% Efficiency

In this study, a novel wide-bandgap small molecule guest material, ITOA, designed and synthesized for fabricating efficient ternary organic solar cells (OSCs) ITOA complements the absorbance of the PM6:Y6 binary system, exhibiting strong crystallinity and modest miscibility. ITOA optimizes the morphology by promoting intensive molecular packing, reducing domain size, and establishing a preferred vertical phase distribution. These features contribute to improved and well-balanced charge transport, suppressed carrier recombination, and efficient exciton dissociation. Consequently, a significantly enhanced efficiency of 18.62% for the ternary device is achieved, accompanied by increased short-circuit current density (JSC), fill factor (FF), and open-circuit voltage (VOC). Building on this success, replacing Y6 with BTP-eC9 leads to an outstanding PCE of 19.33% for the ternary OSCs. Notably, the introduction of ITOA expedites the formation of the optimized morphology, resulting in an impressive PCE of 18.04% for the ternary device without any postprocessing. Moreover, the ternary device exhibits enhanced operational stability under maximum power point (MPP) tracking. This comprehensive study demonstrates that a rationally designed guest molecule can optimize morphology, reduce energy loss, and streamline the fabrication process, essential for achieving high efficiency and stability in OSCs, paving the way for practical commercial applications.

Opportunities and challenges in perovskite-organic thin-film tandem solar cells

Efficiency is paramount in enhancing the performance and cost-effectiveness of solar cells. Recent advancements in single-junction perovskite solar cells (PSCs) have yielded an impressive efficiency of 26.1%, nearing their theoretical limit. Meanwhile, multi-junction tandem solar cells exhibit a remarkable efficiency potential exceeding 42%, surpassing the 33% limit of single-junction cells, thereby opening avenues for ultra-high-efficiency solar cells. Tandem solar cells (TSCs) represent a groundbreaking photovoltaic technology, offering high efficiency, low cost, and a simple fabrication process. Among various TSCs, perovskite-organic TSCs (PO TSCs) are particularly promising due to their ability to leverage the complementary strengths of PSCs and organic solar cells (OSCs). PO TSCs are poised to outperform existing TSCs in terms of device performance, manufacturing cost, and diverse applications. The introduction of Y6-series non-fullerene acceptors (NFAs) over the past three years has significantly advanced the development of OSCs, leading to remarkable progress in PO TSCs. This paper commences by elucidating the advantages and potential of OSCs as bottom sub-cells in PO TSCs, followed by an in-depth review of mainstream interconnection layer (ICL) design. It then addresses key challenges in wide bandgap PSCs, including phase segregation, photovoltage loss, energy loss, and long-term stability. The paper concludes by examining critical factors influencing the future development of PO TSCs.

Highly-Efficient 2D Nonfullerene Acceptors Enabled by Subtle Molecular Tailoring Engineering

The conjugate expansion of nonfullerene acceptors is considered to be a promising approach for improving organic photovoltaic performance because of its function in tuning morphological structure and molecular stacking behavior. In this work, two nonfullerene acceptors are designed and synthesized using a 2D π-conjugate expansion strategy, thus enabling the construction of highly-efficient organic solar cells (OSCs). Compared with YB2B (incorporating dibromophenanthrene on the quinoxaline-fused core), YB2T (incorporating dibromobenzodithiophene on the quinoxaline-fused core) has red-shifted spectral absorption and better charge transport properties. Moreover, the more orderly and tightly intermolecular stacking of YB2T provides the possibility of forming a more suitable phase separation morphology in blend films. Through characterization and analysis, the YB2T-based blend film is found to have higher exciton dissociation efficiency and less charge recombination. Consequently, the power conversion efficiency (PCE) of 17.05% is achieved in YB2T-based binary OSCs, while YB2B-based devices only reached 10.94%. This study demonstrates the significance of the aromatic-ring substitution strategy for regulating the electronic structure and aggregation behavior of 2D nonfullerene acceptors, facilitating the development of devices with superior photovoltaic performance.

Small Molecule Donors Design Rules for Non-Halogen Solvent Fabricated Organic Solar Cells

Compared with all-small-molecule (ASM) and other types of organic solar cells (OSCs), the small molecule donor:polymer acceptor (SMD:PA) OSCs develop much slower due to the lack of material matching rules. Herein, by changing the end-cap substituent of the small molecule donor from ethyl (MPhS-C2) to benzyl (MPhS-Ph), the different selection rules of donor properties and thermal annealing (TA) treatment between the ASM and the SMD:PA system under tetrahydrofuran processing are thoroughly investigated. Therefore, MPhS-Ph exhibits more ordered molecular packing, leading to better adaptability in the SMD:PA system without TA; while the inferior molecular packing of MPhS-C2 after spin-coating performs better in the ASM system with TA. Whether spin-coating or TA process dominates morphological optimization also dominates their energy loss. Therefore, the MPhS-Ph:PYF-T-o and MPhS-C2:BTP-eC9 based devices achieve the highest power conversion efficiency (PCE) of 12.1% and 15.7%, respectively, both of which are cutting-edge PCEs in their own type of OSCs fabricated by non-halogen solvent. This result suggests that intrinsic strong crystallization independent of the thermal drive is hoped in SMD:PA-OSCs, while high miscibility after spin-coating and proper assembly under thermal drive is expected in ASM-OSCs, providing deep understanding and guidance in highly efficient materials design rules in both ASM-OSCs and SMD:PA-OSCs.

A2-A1-D-A1-A2-Type Nonfullerene Acceptors

The A2-A1-D-A1-A2-type molecules consist of one electron-donating (D) core flanked by two electron-accepting units (A1 and A2) and have emerged as an essential branch of nonfullerene acceptors (NFAs). These molecules generally possess higher molecular energy levels and wider optical bandgaps compared with those of the classic A-D-A- and A-DA'D-A-type NFAs, owing to the attenuated intramolecular charge transfer effect. These characteristics make them compelling choices for the fabrication of high-voltage organic photovoltaics (OPVs), ternary OPVs, and indoor OPVs. Herein, the recent progress in the A2-A1-D-A1-A2-type NFAs are reviewed, including the molecular engineering, structure-property relationships, voltage loss (Vloss), device stability, and photovoltaic performance of binary, ternary, and indoor OPVs. Finally, the challenges and provided prospects are discussed for the further development of this type of NFAs.

On the role of asymmetric molecular geometry in high-performance organic solar cells

Although asymmetric molecular design has been widely demonstrated effective for organic photovoltaics (OPVs), the correlation between asymmetric molecular geometry and their optoelectronic properties is still unclear. To access this issue, we have designed and synthesized several symmetric-asymmetric non-fullerene acceptors (NFAs) pairs with identical physical and optoelectronic properties. Interestingly, we found that the asymmetric NFAs universally exhibited increased open-circuit voltage compared to their symmetric counterparts, due to the reduced non-radiative charge recombination. From our molecular-dynamic simulations, the asymmetric NFA naturally exhibits more diverse molecular interaction patterns at the donor (D):acceptor (A) interface as compared to the symmetric ones, as well as higher D:A interfacial charge-transfer state energy. Moreover, it is observed that the asymmetric structure can effectively suppress triplet state formation. These advantages enable a best efficiency of 18.80%, which is one of the champion results among binary OPVs. Therefore, this work unambiguously demonstrates the unique advantage of asymmetric molecular geometry, unveils the underlying mechanism, and highlights the manipulation of D:A interface as an important consideration for future molecular design.

Ultra-efficient delivery of CRISPR/Cas9 using ionic liquid conjugated polymers for genome editing-based tumor therapy

Emerging CRISPR-Cas9 systems can rebuild DNA sequences in the genome in a spatiotemporal manner, offering a magic tool for biological research, drug discovery, and gene therapy. However, low delivery efficiency remains a major roadblock hampering the wide application of CRISPR-Cas9 gene editing talent. Herein, ionic liquid-conjugated polymers (IL-CPs) are explored as efficient platforms for CRISPR-Cas9 plasmid delivery and in vivo genome editing-based tumor therapy. Via molecular screening of IL-CPs, IL-CPs integrated with fluorination monomers (PBF) can encapsulate plasmids into hybrid nanoparticles and achieve over 90% delivery efficiency in various cells regardless of serum interference. In vitro and in vivo experiments demonstrate that PBF can mediate Cas9/PLK1 plasmids for intracellular delivery and therapeutic genome editing in tumor, achieving efficient tumor suppression. This work provides a new tool for safe and efficient CRISPR-Cas9 delivery and therapeutic genome editing, thus opening a new avenue for the development of ionic liquid polymeric vectors for genome editing and therapy.

Selenium substitution for dielectric constant improvement and hole-transfer acceleration in non-fullerene organic solar cells

Dielectric constant of non-fullerene acceptors plays a critical role in organic solar cells in terms of exciton dissociation and charge recombination. Current acceptors feature a dielectric constant of 3-4, correlating to relatively high recombination loss. We demonstrate that selenium substitution on acceptor central core can effectively modify molecule dielectric constant. The corresponding blend film presents faster hole-transfer of ~5 ps compared to the sulfur-based derivative (~10 ps). However, the blends with Se-acceptor also show faster charge recombination after 100 ps upon optical pumping, which is explained by the relatively disordered stacking of the Se-acceptor. Encouragingly, dispersing the Se-acceptor in an optimized organic solar cell system can interrupt the disordered aggregation while still retain high dielectric constant. With the improved dielectric constant and optimized fibril morphology, the ternary device exhibits an obvious reduction of non-radiative recombination to 0.221 eV and high efficiency of 19.0%. This work unveils heteroatom-substitution induced dielectric constant improvement, and the associated exciton dynamics and morphology manipulation, which finally contributes to better material/device design and improved device performance.

The Influence of Donor/Acceptor Interfaces on Organic Solar Cells Efficiency and Stability Revealed through Theoretical Calculations and Morphology Characterizations

End-groups halogenation strategies, generally refers to fluorination and chlorination, have been confirmed as simple and efficient methods to regulate the photoelectric performance of non-fullerene acceptors (NFAs), but a controversy over which one is better has existed for a long time. Here, two novel NFAs, C9N3-4F and C9N3-4Cl, featured with different end-groups were successfully synthesized and blended with two renowned donors, D18 and PM6, featured with different electron-withdrawing units. Detailed theoretical calculations and morphology characterizations of the interface structures indicate NFAs based on different end-groups possess different binding energy and miscibility with donors, which shows an obvious influence on phase-separation morphology, charge transport behavior and device performance. After verified by other three pairs of reported NFAs, a universal conclusion obtained as the devices based on D18 with fluorination-end-groups-based NFAs and PM6 with chlorination-end-groups-based NFAs generally show excellent efficiencies, high fill factors and stability. Finally, the devices based on D18: C9N3-4F and PM6: C9N3-4Cl yield outstanding efficiency of 18.53 % and 18.00 %, respectively. Suitably selecting donor and regulating donor/acceptor interface can accurately present the photoelectric conversion ability of a novel NFAs, which points out the way for further molecular design and selection for high-performance and stable organic solar cells.

Noncovalent Interaction Boosts Performance and Stability of Organic Solar Cells Based on Giant-Molecule Acceptors

Designing giant-molecule acceptors is deemed as an up-and-coming strategy to construct stable organic solar cells (OSCs) with high performance. Herein, two giant dimeric acceptors, namely, DYV and DYFV, have been designed and synthesized by linking two Y-series derivatives with a vinyl unit. DYFV exhibits more red-shifted absorption, down-shifted energy levels, and enhanced intermolecular packing than DYV because the intramolecular noncovalent interaction (H···F) of DYFV leads to better coplanarity of the backbone. The D18:DYFV film owns a distinct nanofibrous nanophase separation structure, a more dominant face-on orientation, and more balanced carrier mobilities. Therefore, the D18:DYFV OSC achieves a higher photoelectron conversion efficiency of 17.88% and a longer-term stability with a t80 over 45,000 h compared with the D18:DYV device. The study demonstrates that the intramolecular noncovalent interaction is a superior strategy to design giant-molecule acceptors and boost the photovoltaic performance and stability of the OSCs.

Precise Methylation Yields Acceptor with Hydrogen-Bonding Network for High-Efficiency and Thermally Stable Polymer Solar Cells

Utilizing intermolecular hydrogen-bonding interactions stands for an effective approach in advancing the efficiency and stability of small-molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2-b]quinoxalin-11-one (Qox) as the electron-deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox-based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond-assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem-dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen-bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor-acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen-bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs.

Manipulating Vertical Phase Separation Enables Pseudoplanar Heterojunction Organic Solar Cells Over 19% Efficiency via Ternary Polymerization

Controlling vertical phase separation of the active layer to enable efficient exciton dissociation and charge carrier transport is crucial to boost power conversion efficiencies (PCEs) of pseudoplanar heterojunction (PPHJ) organic solar cells (OSCs). However, how to optimize the vertical phase separation of PPHJ OSCs via molecule design is rarely reported yet. Herein, ternary polymerization strategy is employed to develop a series of polymer donors, DL1-DL4, and regulate their solubility, molecular aggregation, molecular orientation, and miscibility, thus efficiently manipulating vertical phase separation in PPHJ OSCs. Among them, DL1 not only has enhanced solubility, inhibited molecular aggregation and partial edge-on orientation to facilitate acceptor molecules, Y6, to permeate into polymer layer and increase donor/acceptor interfaces, but also sustains high crystallinity and appropriate miscibility with Y6 to acquire ordered molecular packing, thus achieving optimized vertical phase separation to well juggle exciton dissociation and charge transport in PPHJ devices. Therefore, DL1/Y6 based PPHJ OSCs gain the best exciton dissociation probability, highest charge carrier mobilities and weakest charge recombination, and thus afford an impressive PCE of 19.10%, which is the record value for terpolymer donors. It demonstrates that ternary polymerization is an efficient method to optimize vertical phase separation in PPHJ OSCs for high PCEs.

A Fused-Ring Electron Acceptor with Phthalimide-Based Ending Groups for Efficient Ternary Organic Solar Cells

The ternary strategy has been widely applied and recognized to be a valid strategy to enhance the organic photovoltaics' (OPVs) performance. Here, a new fused-ring electron acceptor, BTP-PIO, is designed and synthesized, whose ending groups were replaced by a phthalimide-based group (2-butylcyclopenta[f]isoindole-1,3,5,7(2H,6H)-tetraone) from traditional 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile. The phthalimide-based ending groups endow BTP-PIO with the highest lowest unoccupied molecular orbital (LUMO) level and wider band gap than those of Y6. The ternary device based on PM6:Y6 with BTP-PIO as a guest electron acceptor achieved an elevated open-circuit voltage (VOC) of 0.848 V, a short-circuit current density (JSC) of 27.31 mA cm-2, and a fill factor (FF) of 73.9%, generating a remarkable power conversion efficiency (PCE) of 17.10%, which is superior to the PM6:Y6 binary device of 16.08%. The ternary device exhibited improved charge transfer, suppressed carrier recombination, and lower energy loss. BTP-PIO exhibited a good miscibility with Y6, and an alloy phase between BTP-PIO and Y6 was formed in the ternary bulk heterojunction, leading to better phase separation and molecular packing. This research reveals that ending group modification of Y6 derivatives is a feasible way to produce highly efficient ternary devices.

Design of Chlorinated Indaceno[1,2-b:5,6-b']dithiophene Acceptors toward Efficient Organic Photovoltaics

Chlorinated modifications have been extensively employed to modulate the optoelectronic properties of π-conjugated materials. Herein, the Cl substitution in designing nonfullerene acceptors (NFAs) with various bandgaps is studied. Four narrow-bandgap electron acceptors (GS-40, GS-41, GS-42, and GS-43) were synthesized by tuning the electrostatic potential distributions of the molecular conjugated backbones. The optical absorption onset of these NFAs ranges from 900 to 1030 nm. Compared to the nonchlorinated analogue, the introduction of Cl atoms on the core of indaceno[1,2-b:5,6-b'] dithiophene (IDT) and π spacer results in an upward shift of the lowest unoccupied molecular orbital levels and induces a blue shift in the absorption spectra of the NFAs. This alteration facilitates achieving appropriate energy-level alignment and favorable bulk heterojunction morphology when blended with the widely used donor PBDB-TF. The PBDB-TF:GS-43-based solar cells show an optimal power conversion efficiency of 13.3%. This work suggests the potential of employing chlorine-modified IDT and thiophene units as fundamental building blocks for developing high-performance photoactive materials.

Trap suppression in ordered organic photovoltaic heterojunctions

The high trap density (generally 1016-1018 cm-3) in organic solar cells (OSCs) brings about the localization of charge carriers and reduced charge carrier lifetime, mainly due to the weak intermolecular interactions of organic semiconductors resulting in their relatively poor crystallinity, which leads to low charge carrier mobilities and intense non-radiative recombination, thus impeding the further improvement of power conversion efficiencies (PCEs). Therefore, trap suppression is crucial to boost the performance of OSCs, and improving the crystallinity of donor/acceptor materials and enhancing the molecular order in devices can contribute to the trap suppression in OSCs. In this feature article, we summarize the recent advances of trap suppression in OSCs by material design and device engineering, and further outline possible development directions for trap suppression to enhance PCEs of OSCs.

Optimized Crystal Framework by Asymmetric Core Isomerization in Selenium-Substituted Acceptor for Efficient Binary Organic Solar Cells

Both the regional isomerization and selenium-substitution of the small molecular acceptors (SMAs) play significant roles in developing efficient organic solar cells (OSCs), while their synergistic effects remain elusive. Herein, we developed three isomeric SMAs (S-CSeF, A-ISeF, and A-OSeF) via subtly manipulating the mono-selenium substituted position (central, inner, or outer) and type of heteroaromatic ring on the central core by synergistic strategies for efficient OSCs, respectively. Crystallography of asymmetric A-OSeF presents a closer intermolecular π-π stacking and more ordered 3-dimensional network packing and efficient charge-hopping pathways. With the successive out-shift of the mono-selenium substituted position, the neat films give a slightly wider band gap and gradually higher crystallinity and electron mobility. The PM1 : A-OSeF afford favourable fibrous phase separation morphology with more ordered molecular packing and efficient charge transportation compared to the other two counterparts. Consequently, the A-OSeF-based devices achieve a champion efficiency of 18.5 %, which represents the record value for the reported selenium-containing SMAs in binary OSCs. Our developed precise molecular engineering of the position and type of selenium-based heteroaromatic ring of SMAs provides a promising synergistic approach to optimizing crystal stacking and boosting top-ranked selenium-containing SMAs-based OSCs.

Propeller vs Quasi-Planar 6-Cantilever Small Molecular Platforms with Extremely Two-Dimensional Conjugated Extension

Two exotic 6-cantilever small molecular platforms, characteristic of quite different molecular configurations of propeller and quasi-plane, are established by extremely two-dimensional conjugated extension. When applied in small molecular acceptors, the only two cases of CH25 and CH26 that could contain six terminals and such broad conjugated backbones have been afforded thus far, rendering featured absorptions, small reorganization and exciton binding energies. Moreover, their distinctive but completely different molecular geometries result in sharply contrasting nanoscale film morphologies. Finally, CH26 contributes to the best device efficiency of 15.41 % among acceptors with six terminals, demonstrating two pioneered yet highly promising 6-cantilever molecular innovation platforms.