Copper Catalyzed C(sp3)-H Bond Alkylation via Photoinduced Ligand-to-Metal Charge Transfer

Visible-Light-Mediated, LMCT-Enabled C(sp3)-H Bond Alkylation of Alkanes and Silanes via C-4 Functionalization of Coumarins

A visible-light-promoted FeCl3-catalyzed protocol for the generation of alkyl and silyl radicals from alkanes and silanes, respectively, is described. Employing a chlorine radical as a hydrogen atom transfer agent, alkyl, and silyl radicals were accessed and functionalized by addition to coumarins, ultimately resulting in a redox-neutral alkylation/silylation. The reaction occurs without an exogenous oxidant and under mild conditions, highlighting the potential of 3D-metal compounds in achieving challenging bond activations via photochemical excitation.

Visible-Light-Driven Catalytic Dehalogenation of Trichloroacetic Acid and α-Halocarbonyl Compounds: Multiple Roles of Copper

Herein, we report the reaction development and mechanistic studies of visible-light-driven Cu-catalyzed dechlorination of trichloroacetic acid for the highly selective formation of monochloroacetic acid. Visible-light-driven transition metal catalysis via an inner-sphere pathway features the dual roles of transition metal species in photoexcitation and substrate activation steps, and a detailed mechanistic understanding of their roles is crucial for the further development of light-driven catalysis. This catalytic method, which features environmentally desired ascorbic acid as the hydrogen atom source and water/ethanol as the solvent, can be further applied to the dehalogenation of a variety of halocarboxylic acids and amides. Spectroscopic, X-ray crystallographic, and kinetic studies have revealed the detailed mechanism of the roles of copper in photoexcitation, thermal activation of the first C-Cl bond, and excited-state activation of the second C-Cl bond via excited-state chlorine atom transfer.

Photocatalytic CeCl3-Promoted C-H Alkenylation and Alkynylation of Alkanes

The reemerging field of photoredox catalysis offers numerous advantages towards the development of novel, sustainable and easy-to-execute organic transformations. Herein, we report a light-triggered application of cerium complexes towards the C-H alkenylation and alkynylation of alkanes. An indirect HAT-mediated photocatalytic protocol was developed, using a cerium salt (CeCl3 ⋅ 7H2O) and a chlorine source (TBACl) as the catalytic system. A variety of cyclic and linear hydrocarbons were utilized, delivering the corresponding alkenylation or alkynylation products in good to high yields, displaying high regioselectivity. A series of mechanistic experiments were conducted.

Photoinduced ligand-to-metal charge transfer (LMCT) in organic synthesis: reaction modes and research advances

In recent years, visible light-induced ligand-to-metal charge transfer (LMCT) has emerged as an attractive approach for synthesizing a range of functionalized molecules. Compared to conventional photoredox reactions, photoinduced LMCT activation does not depend on redox potential and offers diverse reaction pathways, making it particularly suitable for the activation of inert bonds and the functional modification of complex organic molecules. This review highlights the indispensable role of photoinduced LMCT in synthetic chemistry, with a focus on recent advancements in LMCT-mediated hydrogen atom transfer (HAT), C-C bond cleavage, decarboxylative transformations, and radical ligand transfer (RLT) reactions.

Aerobic oxidation of alkylarenes and polystyrene waste to benzoic acids via a copper-based catalyst

The chemical recycling of polystyrene (PS) waste to value-added aromatic compounds is an attractive but formidable challenge due to the inertness of the C-C bonds in the polymer backbone. Here we develop a light-driven, copper-catalyzed protocol to achieve aerobic oxidation of various alkylarenes or real-life PS waste to benzoic acid and oxidized styrene oligomers. The resulting oligomers can be further transformed under heating conditions, thus achieving benzoic acid in up to 65% total yield through an integrated one-pot two-step procedure. Mechanistic studies show that the CuCl2 catalyst undergoes Ligand-to-Metal Charge Transfer (LMCT) to generate a chlorine radical, which triggers activation of the C-H bond and subsequent oxidative cleavage of C-C bonds. The practicality and scalability of this strategy are demonstrated by depolymerization of real-life PS foam on a gram scale, thus showing promising application potential in chemical recycling of PS waste.

Mechanistic Investigation of the Ce(III) Chloride Photoredox Catalysis System: Understanding the Role of Alcohols as Additives

Photocatalytic C-H activation is an emerging area of research. While cerium chloride photocatalysts have been extensively studied, the role of alcohol additives in these systems remains a subject of ongoing discussion. It was demonstrated that the photocatalyst [NEt4]2[CeIVCl6] (1) produces •Cl and added alcohols exhibit zero-order kinetics. Prior studies by other researchers suggested that 1 and alcohols lead to cerium alkoxide [Ce-OR] and alkoxy radical intermediates. To understand these seemingly divergent mechanistic proposals, an expanded investigation comparing cerium(IV) catalyst 1 and cerium(III) complex [NEt4]3[CeIIICl6] (2), which exhibit markedly different reactivity and C-H selectivity, is disclosed. Our findings reveal that alcohol additives accelerate the conversion of cerium(III) to cerium(IV) catalysts, forming key intermediates such as [NEt4]2[CeIIICl5(HOCH3)] (5) and [NEt4]2[CeIVCl5(OCH3)] (6), driven by excited-state di-tert-butyl azodicarboxylate under blue light irradiation. The active complex 6 releases the •OCH3 radical, in sharp contrast to •Cl radicals initiated by cerium(IV) photoredox catalyst 1. These different reactivity and selectivity profiles can be understood in the context of complex 5 generation and in situ formation of base to afford complex 6. Experimental validation shows enhanced selectivity toward C-H bonds with different reactivity with catalyst 1 and methanol upon the addition of base and decreased selectivity with catalyst 2 and methanol upon the addition of acid. These findings unify the previously contrasting observations of cerium halide/alkoxide photocatalytic systems and provide a comprehensive understanding on the essential role of base/acid and alcohol in selectivity and reactivity.

Selective Arene Photonitration via Iron-Complex β-Homolysis

Nitroaromatics, as an important member and source of nitrogen-containing aromatics, is bringing enormous economic benefits in fields of pharmaceuticals, dyes, pesticides, functional materials, fertilizers, and explosives. Nonetheless, the notoriously polluting nitration industry, which suffers from excessive discharge of fumes and waste acids, poor functional group tolerance, and tremendous purification difficulty, renders mild, efficient, and environmentally friendly nitration a formidable challenge. Herein, we develop a visible-light-driven biocompatible arene C-H nitration strategy with good efficiency and regioselectivity, marvelous substrate applicability and functional group tolerance, and wide application in scale-up synthesis, total synthesis, and late-stage functionalization. A nitryl radical delivered through unusual β-homolysis of a photoexcited ferric-nitrate complex is proposed to be the key nitrification reagent in this system.

Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C-C Bond Formation

Catalytic C-H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C-C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C-H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C-C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.

Red-Light-Induced Ligand-to-Metal Charge Transfer Catalysis by Tuning the Axial Coordination of Cobyrinate

Photoinduced ligand-to-metal charge transfer (LMCT) is a powerful technique for the formation of reactive radical species via homolytic cleavage of the metal-ligand bond. Here, we present that the excited state LMCT of a cobyrinate complex can be accessed by tuning its axial coordination with thiolates as ligands. We demonstrate the photoreduction of cobalt via the excited state Co-S bond homolytic cleavage, as guided by the DFT calculations, which signify the relevance of thiolate axial ligands facilitating the LMCT reactivity. By exploiting this excited state LMCT of cobyrinate, we developed a catalyst-controlled activator regeneration mechanism to catalyze an efficient atom transfer radical polymerization (ATRP) under low-energy light irradiation. Tuning the coordination sphere of cobyrinate provides further control over the electronic properties of the complex while also accessing photothermal conversion in mediating ATRP catalysis.

Regulating Chlorine and Hydrogen Atom Transfer for Selective Photoelectrochemical C─C Coupling by Cu-coordination Effect at Semiconductor/Electrolyte Interfaces

Semiconductor-based photoelectrochemical (PEC) organic transformations usually show radical characteristics, in which the reaction selectivity is often difficult to precisely control due to the nonselectivity of radicals. Accordingly, several simple organic reactions (e.g., oxidations of alcohols, aldehydes, and other small molecules) have been widely studied, while more complicated processes like C─C coupling remain challenging. Herein, a synergistic heterogeneous/homogeneous PEC strategy is developed to achieve a controllable radical-induced C─C coupling reaction mediated by the copper-coordination effect at the semiconductor/electrolyte interfaces, which additionally exerts a significant impact on the product regioselectivity. Through experimental studies and theoretical simulations, this study reveals that the copper-chloride complex effectively regulates the formation of chloride radicals, a typical hydrogen atom transfer agent, on semiconductor surfaces and stabilizes the heterogeneous interfaces by suppressing the radical-induced surface passivation. Taking the Minisci reaction (the coupling between 2-phenylquinoline and cyclohexane) as a model, the yield of the target C─C coupling product reaches up to 90% on TiO2 photoanodes with a selectivity of 95% and long-term stability over 100 h. Moreover, such a strategy exhibits a broad scope and can be used for the functionalization of various heteroaromatic hydrocarbons.

Direct alkene functionalization via photocatalytic hydrogen atom transfer from C(sp3)-H compounds: a route to pharmaceutically important molecules

Direct functionalization of alkenes with C(sp3)-H substrates offers unique opportunities for the rapid construction of pharmaceuticals and natural products. Although significant progress has been made over the past decades, the development of green, high step-economy methods to achieve these transformations under mild conditions without the need for pre-functionalization of C(sp3)-H bonds remains a substantial challenge. Therefore, the pursuit of such methodologies is highly desirable. Recently, the direct activation of C(sp3)-H bonds via photocatalytic hydrogen atom transfer (HAT), especially from unactivated alkanes, has shown great promise. Given the potential of this approach to generate a wide range of pharmaceutically relevant compounds, this review highlights the recent advancements in the direct functionalization of alkenes through photocatalytic HAT from C(sp3)-H compounds, as well as their applications in the synthesis and diversification of drugs, natural products, and bioactive molecules, aiming to provide medicinal chemists with a practical set of tools.

Visible Light-Driven Excited-State Copper-BINAP Catalysis for Accessing Diverse Chemical Reactions

The use of visible light to drive chemical transformations has a history spanning over a century. However, the development of photo-redox catalysts to efficiently harness light energy is a more recent advancement, evolving over the past two decades. While ruthenium and iridium-based photocatalysts dominate due to their photostability, long excited-state lifetimes, and high redox potentials, concerns about sustainability and cost have shifted attention to first-row transition metals. Luminescent Cu(I) complexes have emerged as promising alternatives, offering open-shell reactivity and tunable photoelectrochemical properties. This review (i) provides an overview of the structural, photophysical, and electrochemical properties governing copper(I) complexes; (ii) highlights advances in Cu(I)-BINAP catalysis for carbon-carbon and carbon-heteroatom bond formations under mild conditions; and (iii) analyzes the trajectory of this catalytic system, addressing challenges and identifying opportunities for further development.

A Fluorescent Chemosensor for Detection pH and Cu2+ Ion Base on 7-((2-Aminoethyl)amino)-5-Bromo-6-Hydroxy-1-Methylquinolin-1-ium-3-Sulfonate: Experimental and DFT Calculation

A quinoline derivative 7-((2-aminoethyl)amino)-5-bromo-6-hydroxy-1-methylquinolin-1-ium-3-sulfonate (QEt) containing quinoline ring, - SO 3 - sulfonate, -OH phenol, and amine groups was synthesized and studied luminescence properties. The aqueous solutions QEt 10µM change luminescence color from green (λem = 490 nm) to yellow (λem = 563 nm) as increasing pH and the intensity at a peak of 563 nm is linearly proportional with pH value in the range of pH = 3,0-4,0. The QEt solution can be used as a chemosensor for Cu2+ with an LOD value at 0.66 μ M . Along with the experiment, the structure, absorption and emission spectra of QEt have been investigated by TD-DFT calculation. The result shows that the absorption band centered at 420 nm is due to the electron transition from HOMO to LUMO (π → π*). The results also help to assign emission band centered at 490 nm is due to the S1 → S0 transition (LUMO → HOMO singlet transition), at 563 nm is due to the T1 → S0 transition (LUMO → HOMO triplet transition). The dependence of the relative intensity of each emission peak on pH, which is experimentally recorded, is explained based on the results of theoretical TD-DFT calculation.

A facile, catalyst- and additive-free, and scalable approach to the photochemical preparation of disulfides from organosulfenyl chlorides

A novel, clean and efficient protocol for the preparation of disulfides has been developed through the photochemical radical homo- and cross-coupling reaction of sulfenyl chlorides under LED irradiation and without the use of any catalyst and additive. The representative photochemical homo-coupling of trichloromethyl sulfenyl chloride has been successfully conducted on kilogram-scale in a continuous flow mode. The solvent and the main byproduct can be recovered in high yields, which makes the approach be highly atom economical.

Bifunctional iron-catalyzed alkyne Z-selective hydroalkylation and tandem Z-E inversion via radical molding and flipping

The challenging synthesis of thermodynamic-unfavored cis-olefins through catalytic cross-coupling reactions requires the synergistic interaction of substrate-activating units and configuration-regulating catalysts. Successfully hitting these two birds with one stone, we herein develop a convenient photoredox access to Z-alkenes from alkynes and light alkanes with a bifunctional iron-catalyzed system possessing both C(sp3)-H activation and configuration-controlling abilities. The protocol exhibits 100% atom utilization, mild conditions, a broad substrate scope, and compatibility with multitudinous functional groups. The detailed reaction mechanism and the origin of geometry regulation are well investigated by experimental and computational studies. Progressively, a catalytic amount of diaryl disulfides is introduced for consecutive photoinduced Z-E isomerization via reversible radical addition and flipping. Big steric hindrance substituents assembled on the disulfide emerge necessity for suppressing double-bond migration. This tandem strategy paves a promising way for stereoselective alkene construction and will bring significant inspiration for the development of transition metal photocatalysis.

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

Photocatalyzed Direct C(sp3)-H Alkenylation of Unactivated Alkanes via Tandem C-C Activation of Cyclopropenes

A highly adaptable method has been developed for the alkenylation of a broad spectrum of inert alkanes, employing milder reaction conditions. Tetrabutylammonium decatungstate (TBADT) serves as a photocatalyst for hydrogen atom transfer (HAT), instigating the formation of transient alkyl radicals through C(sp3)-H functionalization. These radicals exhibit regioselective addition to cyclopropenes, followed by the subsequent activation of C-C bonds, forming the corresponding vinylated derivatives. This methodology accommodates diverse unreactive C(sp3)-H bond motifs and multisubstituted cyclopropenes, enabling the efficient synthesis of highly functionalized olefins with high diastereoselectivity.

Iron-Catalyzed Electrophotochemical α-Functionalization of a Silylcyclobutanol

Four-membered ring structure is important in organic chemistry, and selective cleavage and functionalization of these strained rings are of great interest. However, direct α-functionalization of cyclobutanols is rarely reported because of the high O-H bond dissociation energy and the occurrence of β-scission of C-C bonds in these alcohols. Recently, transition-metal catalysis has facilitated alkoxy radical generation. Herein, we report a method for electrophotochemical α-functionalization of a silylcyclobutanol via visible-light-induced LMCT reactions of M-alkoxy complexes. Introduction of the silyl group into the cyclobutanol structure favored fast [1,2]-silyl transfer over ring opening, thus allowing the generation of α-functionalized products.

Titanium in photocatalytic organic transformations: current applications and future developments

Titanium, as an important transition metal, has garnered extensive attention in both industry and academia due to its excellent mechanical properties, corrosion resistance, and unique reactivity in organic synthesis. In the field of organic photocatalysis, titanium-based compounds such as titanium dioxide (TiO2), titanocenes (Cp2TiCl2, CpTiCl3), titanium tetrachloride (TiCl4), tetrakis(isopropoxy)titanium (Ti(OiPr)4), and chiral titanium complexes have demonstrated distinct reactivity and selectivity. This review focuses on the roles of these titanium compounds in photocatalytic organic reactions, and highlights the reaction pathways such as photo-induced single-electron transfer (SET) and ligand-to-metal charge transfer (LMCT). By systematically surveying the latest advancements in titanium-involved organic photocatalysis, this review aims to provide references for further research and technological innovation within this fast-developing field.

Unlocking flavin photoacid catalysis through electrophotochemistry

Molecular flavins are one of the most versatile photocatalysts. They can coordinate single and multiple electron transfer processes, gift hydrogen atoms, form reversible covalent linkages that support group transfer mechanisms, and impart photonic energy to ground state molecules, priming them for downstream reactions. But one mechanism that has not featured extensively is the ability of flavins to act as photoacids. Herein, we disclose our proof-of-concept studies showing that electrophotochemistry can transform fully oxidized flavin quinones to super-oxidized flavinium photoacids that successfully guide proton-transfer and deliver acid-catalyzed products. We also show that these species can adopt a second mechanism wherein they react with water to release hydroxyl radicals that facilitate hydrogen-atom abstraction and sp3C-H functionalization protocols. Together, this unprecedented bimodal reactivity enables electro-generated flavinium salts to affect synthetic chemistries previously unknown to flavins, greatly expanding their versatility as catalysts.

Light-induced ligand-to-metal charge transfer of Fe(III)-OR species in organic synthesis

Light-induced ligand-to-metal charge transfer (LMCT) has been utilized as a powerful strategy in various organic reactions. First-row transition metals, especially iron complexes, show good applications in this process. Fe(III)-Cl and Fe(III)-OR species are two key intermediates involved in the LMCT of iron complexes. This review highlights studies on LMCT of Fe(III)-OR species, including carboxylate-iron and alkoxy-iron species, in organic transformations. Reaction conditions, substrate scope and related mechanisms are discussed.

Photoinduced Ligand-to-Metal Charge Transfer in Base-Metal Catalysis

The absorption of light by photosensitizers has been shown to offer novel reactive pathways through electronic excited state intermediates, complementing ground state mechanisms. Such strategies have been applied in both photocatalysis and photoredox catalysis, driven by generating reactive intermediates from their long-lived excited states. One developing area is photoinduced ligand-to-metal charge transfer (LMCT) catalysis, in which coordination of a ligand to a metal center and subsequent excitation with light results in the formation of a reactive radical and a reduced metal center. This mini review concerns the foundations and recent developments in ligand-to-metal charge transfer in transition metal catalysis focusing on the organic transformations made possible through this mechanism.

Iron-Catalyzed Photoredox Alcohol α-C-H Alkylation and Tandem Intramolecular Cyclization: Facile Access to Multisubstituted 2,3-Dihydrofurans and γ-Butyrolactones

Multisubstituted furans occupy a pivotal position within the realms of synthetic chemistry and pharmacological science due to their distinctive chemical configurations and inherent properties. We herein introduce a tandem difunctionalization protocol of alcohols for the efficient synthesis of multisubstituted 2,3-dihydrofurans and γ-butyrolactones through the combination of photocatalysis and iron catalysis under mild conditions. Photoredox alcohol α-C(sp3)-H activation and Pinner-type intramolecular cyclization are two key processes. This method features significant convenience, economic benefits, and environmental friendliness.

Photogeneration of Chlorine Radical from a Self-Assembled Fluorous 4CzIPN•Chloride Complex: Application in C-H Bond Functionalization

The chlorine radical is a strong HAT (Hydrogen Atom Transfer) agent that is very useful for the functionalization of C(sp3)-H bonds. Albeit highly attractive, its generation from the poorly oxidizable chloride ion mediated by an excited photoredox catalyst is a difficult task. We now report that 8Rf8-4CzIPN, an electron-deficient fluorous derivative of the benchmark 4CzIPN photoredox catalyst belonging to the donor-acceptor carbazole-cyanoarene family, is not only a better photooxidant than 4CzIPN, but also becomes an excellent host for the chloride ion. Combining these two properties ultimately makes the self-assembled 8Rf8-4CzIPN•Cl- dual catalyst highly reactive in redox-neutral Giese-type C(sp3)-H bond alkylation reactions promoted by the chlorine radical. Additionally, because of its fluorous character, the efficient separation/recovery of 8Rf8-4CzIPN could be envisioned.

Expedient radical phosphonylations via ligand to metal charge transfer on bismuth

Bismuth, in spite of its low cost and low toxicity, has found limited application in organic synthesis. Although the photoactivity of Bi(iii) salts has been well studied, this has not been effectively exploited in photocatalysis. To date, only a single report exists for the Bi-based photocatalysis, wherein carbon centered radicals were generated using ligand to metal charge transfer (LMCT) on bismuth. In this regard, expanding the horizon of bismuth LMCT catalysis for the generation of heteroatom centered radicals, we hereby report an efficient radical phosphonylation using BiCl3 as the LMCT catalyst. Phosphonyl radicals generated via visible-light induced LMCT of BiCl3 were subjected to a variety of transformations like alkylation, amination, alkynylation and cascade cyclizations. The catalytic system tolerated a wide range of substrate classes, delivering excellent yields of the scaffolds. The reactions were scalable and required low catalytic loading of bismuth. Detailed mechanistic studies were carried out to probe the reaction mechanism. Diverse radical phosphonylations leading to the formation of sp3-C-P, sp2-C-P, sp-C-P, and P-N bonds in the current work present the candidacy of bismuth as a versatile photocatalyst for small molecule activation.

Iron-Catalyzed Photochemical Synthesis of Sulfinamides from Aliphatic Hydrocarbons and Sulfinylamines

An iron-catalyzed photochemical sulfinamidation of hydrocarbons with N-sulfinylamines has been developed. The merger of ligand-to-metal charge transfer (LMCT) of FeCl3 with hydrogen atom transfer (HAT) process is the key for the generation of alkyl radicals from hydrocarbons, and the resultant alkyl radicals were readily trapped by N-sulfinylamines to produce structurally diverse sulfinamides. Contrary to traditional methods that inevitably use sensitive organometallic reagents and prefunctionalized substrates, our approach features simple operation and the wide availability of starting materials. Gratifyingly, the reaction is scalable, and the obtained sulfinamides can be conveniently converted to highly functionalized sulfur(VI) derivatives.

A new era of LMCT: leveraging ligand-to-metal charge transfer excited states for photochemical reactions

Ligand-to-metal charge transfer (LMCT) excited states are capable of undergoing a wide array of photochemical reactions, yet receive minimal attention compared to other charge transfer excited states. This work provides general criteria for designing transition metal complexes that exhibit low energy LMCT excited states and routes to drive photochemistry from these excited states. General design principles regarding metal identity, oxidation state, geometry, and ligand sets are summarized. Fundamental photoreactions from these states including visible light-induced homolysis, excited state electron transfer, and other photoinduced chemical transformations are discussed and key design principles for enabling these photochemical reactions are further highlighted. Guided by these fundamentals, this review outlines critical considerations for the future design and application of coordination complexes with LMCT excited states.

Photochemical Mn-Mediated Generation of Azide Radicals for Improvement of Alkene Hydroxyazidation

State-of-the-art strategies for alkene-hydroxyazidation, which yield a mixture of β-azido alcohol and β-azido peroxide, must rely on phosphine reagents to improve the chemoselectivity. To overcome the above problems, we present a photochemical hydroxyazidation of alkenes via Mn-mediated ligand-to-metal charge transfer (LMCT) in O2, which activates N3- to •N3 and incorporates O2 to be used as an oxygen source in the hydroxyazidation products. Broad alkene range and step-economy chemistry for the hydroxyazidation transformation were also demonstrated.

Multi-stimuli-responsive polymer degradation by polyoxometalate photocatalysis and chloride ions

Photocatalytic polymer degradation based on harnessing the abundant light energy present in the environment is one of the promising approaches to address the issue of plastic waste. In this study, we developed a multi-stimuli-responsive photocatalytic polymer degradation system facilitated by the photocatalysis of a polyoxometalate [γ-PV2W10O40]5- in conjunction with chloride ions (Cl-) as harmless and abundant stimuli. The degradation of various polymers was significantly accelerated in the presence of Cl-, which was attributed to the oxidation of Cl- by the polyoxometalate photocatalysis into a highly reactive chlorine radical that can efficiently generate a carbon-centered radical for subsequent polymer degradation. Although organic and organometallic photocatalysts decomposed under the conditions for photocatalytic polymer degradation in the presence of Cl-, [γ-PV2W10O40]5- retained its structure even under these highly oxidative conditions.

Photogenerated chlorine radicals activate C(sp3)-H bonds of alkylbenzenes to access quinazolinones

An Fe-catalyzed visible-light induced condensation of alkylbenzenes with anthranilamides has been developed. Upon irradiation, the trivalent iron complex could generate chlorine radicals, which successfully abstracted the hydrogen of benzylic C-H bonds to form benzyl radicals. And these benzyl radicals were converted into oxygenated products under air conditions, which subsequently reacted with anthranilamides for the synthesis of quinazolinones.

Visible light mediated iron-catalyzed addition of oxamic acids to imines

Oxamic acids where shown to add to imines, providing a broad range of α-aminoacid amides in generally good yields. The process is efficient on pre-formed imines but may also be conducted using a 3-component strategy by simply mixing aldehydes, amines and oxamic acids in the presence of ferrocene, acting both as a photocatalyst under visible light and as a Lewis acid. The reaction proceeds through the addition onto the imine of a carbamoyl radical intermediate generated through a charge transfer from the carboxylate ligand to a Fe(iii) species (LMCT).

Direct, Selective α-Aryloxyalkyl Radical Cyanation and Allylation of Aryl Alkyl Ethers

We report the site-selective α-aryloxyalkyl C-H cyanation and allylation of aryl alkyl ethers using an acridinium photocatalyst with phosphate base under LED irradiation (456 nm). Oxidation of the aryl alkyl ether to its corresponding radical cation by the excited stated photocatalyst allowed facile deprotonation of the ArOC(sp3)-H bond to afford an α-aryloxyalkyl radical, which was trapped with sulfone substrates, resulting in expulsion of a sulfonyl radical and formation of allylated or cyanated products.

Unraveling the Prominent Existence of Trace Metals in Photocatalysis: Exploring Iron Impurity Effects

Metal impurities can complicate the identification of active catalyst species in transition metal catalysis and electrocatalysis, potentially leading to misleading findings. This study investigates the influence of metal impurities on photocatalysis. Specifically, the photocatalytic reaction of inert alkanes using chlorides without the use of an external photocatalyst was studied, achieving successful C(sp3)-H functionalization. The observations reveal that Fe and Cu impurities are challenging to avoid in a typical laboratory environment and are prominently present in normal reaction systems, and iron impurities play a dominant role in the aforementioned apparent 'metal-free' reaction. Additionally, iron exhibits significantly higher catalytic activity compared to Cu, Ce, and Ni at low metal concentrations in the photocatalytic C(sp3)-H functionalization using chlorides. Considering the widespread presence of Fe and Cu impurities in typical laboratory environments, this study serves as a reminder of their involvement in reaction processes.

Decarboxylative halogenation of aliphatic carboxylic acids catalyzed by iron salts under visible light

In this article, we report a general protocol for the direct decarboxylative chlorination, iodination, and bromination of aliphatic carboxylic acids catalyzed by iron salts under visible light. This method enjoys a broad substrate scope with good functional group compatibility, including complex natural products. Benzylic and allylic C(sp3)-H bonds can be retained under the oxidative halogenation conditions. This method also shows application potential for late-stage functionalization.

Photo-induced versatile aliphatic C-H functionalization via electron donor-acceptor complex

The ability to selectively introduce diverse functionality onto hydrocarbons is of substantial value in the synthesis of both small molecules and pharmaceuticals. In this endeavour, as a photocatalyst- and metal-free process, the electron donor-acceptor (EDA) strategy has not been well explored. Here we report an approach to aliphatic carbon-hydrogen bond diversification through an EDA complex constituted by HCl and SIV=O groups. As an efficient hydrogen atom transfer (HAT) reagent, chlorine radical can be produced via a proton-coupled electron transfer process in this system. Based on this unusual path, a photo-promoted versatile aliphatic C-H functionalization is developed without photo- and metal-catalysts, including thiolation, arylation, alkynylation, and allylation. This conversion has concise and ambient reaction conditions, good functional group tolerance, and substrate diversity, and provides an alternative solution for the high value-added utilization of bulk light alkanes.

Merging Excited-State Copper Catalysis and Triplet Nitro(hetero)arenes for Direct Synthesis of 2-Aminophenol Derivatives

Nitro(hetero)arene derivatives are essential commodity chemicals used in various products, such as drugs, polymers, and agrochemicals. In this study, we leverage the excited-state reactivities of copper catalysts and nitro(hetero)arenes, and the Umpolung reactivity of acyl radicals to convert readily available nitro(hetero)arenes directly to valuable 2-aminophenol derivatives, which are important scaffolds in many top-selling pharmaceuticals. This reaction is applicable to a variety of nitro(hetero)arenes, acyl chlorides, and late-stage modifications of complex molecules, making it a useful tool for the discovery of new functional molecules. Mechanistic studies, including radical trapping experiments, Stern Volmer quenching studies, light ON/OFF experiments, and 18O-labeling studies, suggest a reaction mechanism involving photoexcitation of a copper complex, diradical couplings, and an in-cage contact ion pair (CIP) migration. Our findings offer a streamlined protocol for synthesizing essential pharmacophores from nitro(hetero)arenes while simultaneously advancing knowledge in excited-state and radical chemistry and stimulating new reaction design and development.

Cu(II) Promoted C(sp3 )-H Activation in Unactivated Cycloalkanes: Oxo-Alkylation of Styrenes to Synthesize β-Disubstituted Ketones

We report the Cu(II) catalyzed synthesis of β-disubstituted ketones from styrene via oxo-alkylation with unactivated cycloalkanes as the alkylating agent in presence of tert-butylhydroperoxide (TBHP) and 1-methylimidazole as oxidant and base respectively. β-disubstituted ketones are known to be synthesized by using either expensive Ru/Ir complexes, or low-cost metal complexes (e. g., Fe, Mn) with activated species like aldehyde, acid, alcohol, or phthalimide derivatives as the alkylating agent, however, use of unactivated cycloalkanes directly as the alkylating agent remains challenging. A wide range of aliphatic C-H substrates as well as various olefinic arenes and heteroarene (35 substrates including 14 new substrates) are well-tolerated in this method. Hammett analysis shed more light on the substitution effect in the olefinic part on the overall mechanism. Furthermore, the controlled experiments, kinetic isotope effect study, and theoretical calculations (DFT) enable us to gain deeper insight of mechanistic intricacies of this new simple and atom-economic methodology.

Terminal C(sp3)-H borylation through intermolecular radical sampling

Hydrogen atom transfer (HAT) processes can overcome the strong bond dissociation energies (BDEs) of inert C(sp3)-H bonds and thereby convert feedstock alkanes into value-added fine chemicals. Nevertheless, the high reactivity of HAT reagents, coupled with the small differences among various C(sp3)-H bond strengths, renders site-selective transformations of straight-chain alkanes a great challenge. Here, we present a photocatalytic intermolecular radical sampling process for the iron-catalyzed borylation of terminal C(sp3)-H bonds in substrates with small steric hindrance, including unbranched alkanes. Mechanistic investigations have revealed that the reaction proceeds through a reversible HAT process, followed by a selective borylation of carbon radicals. A boron-sulfoxide complex may contribute to the high terminal regioselectivity observed.

Decarboxylative photoinduced ligand-to-metal charge transfer reaction: synthesis of 2-substituted chroman-4-ones

In this manuscript, a photoinduced ligand-to-metal charge transfer (LMCT) approach, employing transition-metal-based photocatalysts, for the efficient alkylation of electron-poor olefin is described. The developed redox-neutral process benefits from mild reaction conditions and involves a wide range of chromone-3-carboxylic acids as well as nucleophiles amenable to selective C-H functionalization leading to the formation of 2-substituted chroman-4-one compounds with potential biological activity.

Visible light-induced hydrogen atom transfer trifluoromethylthiolation of aldehydes with bismuth catalyst

By using a combination of BiCl3 and TBACl as a ligand-to-metal charge transfer (LMCT) photocatalyst, hydrogen atom transfer trifluoromethylthiolation of aldehydes was achieved under visible light irradiation. The present method provides economical and operationally simple access to trifluoromethylthioesters using low toxicity and cost-effective bismuth catalysts under mild reaction conditions. Based on the radical trapping experiments, the direct conversion of aldehydes to acyl radicals via chlorine radicals as HAT reagents was proposed as the reaction mechanism.

Photocatalytic, modular difunctionalization of alkenes enabled by ligand-to-metal charge transfer and radical ligand transfer

Ligand-to-metal charge transfer (LMCT) is a mechanistic strategy that provides a powerful tool to access diverse open-shell species using earth abundant elements and has seen tremendous growth in recent years. However, among many reaction manifolds driven by LMCT reactivity, a general and catalytic protocol for modular difunctionalization of alkenes remains unknown. Leveraging the synergistic cooperation of iron-catalyzed ligand-to-metal charge transfer and radical ligand transfer (RLT), here we report a photocatalytic, modular difunctionalization of alkenes using inexpensive iron salts catalytically to function as both radical initiator and terminator. Additionally, strategic use of a fluorine atom transfer reagent allows for general fluorochlorination of alkenes, providing the first example of interhalogen compound formation using earth abundant element photocatalysis. Broad scope, mild conditions and versatility in converting orthogonal nucleophiles (TMSN3 and NaCl) directly into corresponding open-shell radical species are demonstrated in this study, providing a robust means towards accessing vicinal diazides and homo-/hetero-dihalides motifs catalytically. These functionalities are important precursors/intermediates in medicinal and material chemistry. Preliminary mechanistic studies support the radical nature of these transformations, disclosing the tandem LMCT/RLT as a powerful reaction manifold in catalytic olefin difunctionalization.

Synthesis of α-Branched Enones via Chloroacylation of Terminal Alkenes

Here, we show the conversion of unactivated alkenes into α-branched enones via regioselective chloroacylation with acyl chlorides. The method relies upon the initial in situ generation of chlorine radicals directly from the acyl chloride precursor under cooperative nickel/photoredox catalysis. Subsequent HCl elimination provides enones and α,β-unsaturated esters that are not accessible via the conventional acylation approaches that provide the other, linear constitutional isomer.

Cerium Photocatalyst in Action: Structural Dynamics in the Presence of Substrate Visualized via Time-Resolved X-ray Liquidography

[Ce(III)Cl6]3-, with its earth-abundant metal element, is a promising photocatalyst facilitating carbon-halogen bond activation. Still, the structure of the reaction intermediate has yet to be explored. Here, we applied time-resolved X-ray liquidography (TRXL), which allows for direct observation of the structural details of reaction intermediates, to investigate the photocatalytic reaction of [Ce(III)Cl6]3-. Structural analysis of the TRXL data revealed that the excited state of [Ce(III)Cl6]3- has Ce-Cl bonds that are shorter than those of the ground state and that the Ce-Cl bond further contracts upon oxidation. In addition, this study represents the first application of TRXL to both photocatalyst-only and photocatalyst-and-substrate samples, providing insights into the substrate's influence on the photocatalyst's reaction dynamics. This study demonstrates the capability of TRXL in elucidating the reaction dynamics of photocatalysts under various conditions and highlights the importance of experimental determination of the structures of reaction intermediates to advance our understanding of photocatalytic mechanisms.

Multiplicative enhancement of stereoenrichment by a single catalyst for deracemization of alcohols

Stereochemical enrichment of a racemic mixture by deracemization must overcome unfavorable entropic effects as well as the principle of microscopic reversibility; recently, photochemical reaction pathways unveiled by the energetic input of light have led to innovations toward this end, most often by ablation of a stereogenic C(sp3)-H bond. We report a photochemically driven deracemization protocol in which a single chiral catalyst effects two mechanistically different steps, C-C bond cleavage and C-C bond formation, to achieve multiplicative enhancement of stereoinduction, which leads to high levels of stereoselectivity. Ligand-to-metal charge transfer excitation of a titanium catalyst coordinated by a chiral phosphoric acid or bisoxazoline efficiently enriches racemic alcohols that feature adjacent and fully substituted stereogenic centers to enantiomeric ratios up to 99:1. Mechanistic investigations support a pathway of sequential radical-mediated bond scission and bond formation through a common prochiral intermediate and reveal that, although the overall stereoenrichment is high, the selectivity in each individual step is moderate.

Photo-Triggered, Copper(II) Chloride-Catalyzed Radical Hydroalkylation and Hydrosilylation of Vinylboronic Esters To Access Alkylboronic Esters

Alkyl boronic acids and their derivatives constitute vital building blocks in organic synthesis and are important motifs identified in medicinal chemistry. Herein, we present a phototriggered, CuCl2-catalyzed radical hydroalkylation and hydrosilylation of vinylboronic esters to alkylboronic esters. This approach exhibits mild reaction conditions, utilization of easily accessible reagents, and scalability up to a gram scale. Further synthetic transformations of the hydrosilylation products and mechanistic studies are also demonstrated.

Photoelectrochemical oxidative C(sp3)-H borylation of unactivated hydrocarbons

Organoboron compounds are of high significance in organic synthesis due to the unique versatility of boryl substituents to access further modifications. The high demand for the incorporation of boryl moieties into molecular structures has witnessed significant progress, particularly in the C(sp3)-H borylation of hydrocarbons. Taking advantage of special characteristics of photo/electrochemistry, we herein describe the development of an oxidative C(sp3)-H borylation reaction under metal- and oxidant-free conditions, enabled by photoelectrochemical strategy. The reaction exhibits broad substrate scope (>57 examples), and includes the use of simple alkanes, halides, silanes, ketones, esters and nitriles as viable substrates. Notably, unconventional regioselectivity of C(sp3)-H borylation is achieved, with the coupling site of C(sp3)-H borylation selectively located in the distal methyl group. Our method is operationally simple and easily scalable, and offers a feasible approach for the one-step synthesis of high-value organoboron building blocks from simple hydrocarbons, which would provide ample opportunities for drug discovery.

Visible-Light-Enabled Lanthanum-Mediated Intramolecular Epoxy-Ring Opening/Dehydrogenative Lactonization

Catalytic C(sp3)-H functionalization has afforded great opportunities to prepare organic substances, facilitating the derivatization of complex drugs and natural molecules. This letter describes an efficient and practical protocol for lanthanum-catalyzed continuous epoxy-ring opening and oxidative dehydrogenative lactonization under visible-light irradiation. Notably, the lanthanum catalyst also acts as a photocatalyst while acting as a Lewis acid in this reaction; therefore, no additional photocatalyst is required. We can conveniently prepare a series of diverse isochromanones with oxygen-containing spirocyclic structural units under a balloon-oxygen atmosphere at room temperature. Mechanistic studies and control experiments reveal that the in situ-generated lanthanum bromide should be crucial in the reaction.

Cl2 ⋅- Mediates Direct and Selective Conversion of Inert C(sp3 )-H Bonds into Aldehydes/Ketones

Developing new reactive pathway to activate inert C(sp3 )-H bonds for valuable oxygenated products remains a challenge. We prepared a series of triazine conjugated organic polymers to photoactivate C-H into aldehyde/ketone via O2 →H2 O2 →⋅OH→Cl⋅→Cl2 ⋅- . Experiment results showed Cl2 ⋅- could successively activate C(sp3 )-H more effectively than Cl⋅ to generate unstable dichlorinated intermediates, increasing the kinetic rate ratio of dichlorination to monochlorination by a factor of 2,000 and thus breaking traditional dichlorination kinetic constraints. These active intermediates were hydrolyzed into aldehydes or ketones easily, when compared with typical stable dichlorinated complexes, avoiding chlorinated by-product generation. Moreover, an integrated two-phase system in an acid solution strengthened the Cl2 ⋅- mediated process and inhibited product overoxidation, where the conversion rate of toluene reached 16.94 mmol/g/h and the selectivity of benzaldehyde was 99.5 %. This work presents a facile and efficient approach for selective conversion of inert C(sp3 )-H bonds using Cl2 ⋅- .

FeCl3-catalyzed oxidative amidation of benzylic C-H bonds enabled by a photogenerated chlorine-radical

Herein, we report the development of iron-catalyzed benzylic C-H oxidative amidation reactions via photoinduced ligand-to-metal charge transfer (LMCT). These reactions exhibit a broad substrate scope (60 examples) and offer operationally simple, scalable procedures for accessing valuable products from methylarenes in a single step. Mechanistic studies and control experiments confirm the participation of a photogenerated chlorine radical in facilitating the hydrogen atom transfer (HAT) from the benzylic C-H bond to initiate the reaction.

Merging Cu(I) and Cu(II) Photocatalysis: Development of a Versatile Oxohalogenation Protocol for the Sequential Cu(II)/Cu(I)-Catalyzed Oxoallylation of Vinylarenes

A sequential photocatalytic strategy is developed via the merger of Cu(II)/Cu(I)-catalytic cycles for the oxoallylation of vinyl arenes via α-haloketones. The initial Cu(II)-photocatalyzed oxohalogenation exploits ligand-to-metal charge transfer (LMCT) to generate halide radicals from acyl halides utilizing air as a terminal oxidant and can be employed for the late-stage modification of pharmaceuticals and agrochemicals. α-Bromoketones obtained this way can be subsequently subjected to a one-pot Cu(I)-photocatalyzed allylation. This sequential photocatalysis proceeds in a highly regio- and chemoselective fashion and is inconsequential to the electronic nature of styrenes.