Catalytic Furfural/5-Hydroxymethyl Furfural Oxidation to Furoic Acid/Furan-2,5-dicarboxylic Acid with H2 Production Using Alkaline Water as the Formal Oxidant

Solvent-free fabrication of an Ni2P/UiO-66 catalyst for the hydrogenation of furfural to cyclopentanone

Dispersing metal phosphides on supports with large surface areas is a feasible way to boost the catalytic hydrogenation performance. However, metal-organic frameworks (MOFs), which are very promising porous materials, have rarely been used to load metal phosphides owing to the harsh synthesis conditions of metal phosphides. This work demonstrated a facile and solvent-free method to construct a highly dispersed Ni2P/UiO-66 catalyst (the particle size of Ni2P was 2.9 nm). In this method, a nickel precursor was loaded on UiO-66 via simple ball milling, followed by phosphatization, to obtain the Ni2P/UiO-66 catalyst using sodium hypophosphite at 300 °C. This solvent-free process is in line with the concept of green synthesis. In addition, the prepared Ni2P/UiO-66 catalyst showed good catalytic performance for the hydrogenation of furfural to cyclopentanone, with 97.5% yield of cyclopentanone under the conditions of 0.5 MPa H2 at 150 °C for 10 h.

Integrated system for electrolyte recovery, product separation, and CO2 capture in CO2 reduction

Challenges in CO2 capture, CO2 crossover, product separation, and electrolyte recovery hinder electrocatalytic CO2 reduction (CO2R). Here, we present an integrated electrochemical recovery and separation system (ERSS) with an ion separation module (ISM) between the anode and cathode of a water electrolysis system. During ERSS operation, protons from the anolyte flow through the anodic cation exchange membrane (CEM) into the ISM, acidifying the CO2R effluent electrolyte. Cations like K+ in the ISM flow through the cathodic CEM into the catholyte to balance the OH- ions from hydrogen evolution. ERSS recycles electrolyte-adsorbed CO2, recovers KOH with a 94.0% K+ yield, and achieves an 86.2% separation efficiency for CO2R products. The recovered KOH can capture CO2 from air or flue gas or be utilized as a CO2R electrolyte, closing the CO2 capture, conversion, and utilization loop. Compared to the conventional acid-base neutralization process, ERSS saves $119.76 per ton of KOH recovered and is applicable to other aqueous alkaline electrosynthesis reactions.

Pt/IrOx enables selective electrochemical C-H chlorination at high current

Employing electrochemistry for the selective functionalization of liquid alkanes allows for sustainable and efficient production of high-value chemicals. However, the large potentials required for C(sp3)-H bond functionalization and low water solubility of such alkanes make it challenging. Here we discover that a Pt/IrOx electrocatalyst with optimized Cl binding energy enables selective generation of Cl free radicals for C-H chlorination of alkanes. For instance, we achieve monochlorination of cyclohexane with a current up to 5 A, Faradaic efficiency (FE) up to 95% and stable performance over 100 h in aqueous KCl electrolyte. We further demonstrate that our system can directly utilize concentrated seawater derived from a solar evaporation reverse osmosis process, achieving a FE of 93.8% towards chlorocyclohexane at a current of 1 A. By coupling to a photovoltaic module, we showcase solar-driven production of chlorocyclohexane using concentrated seawater in a membrane electrode assembly cell without any external bias. Our findings constitute a sustainable pathway towards renewable energy driven chemicals manufacture using abundant feedstock at industrially relevant rates.

Iron Complexes of 4,5-Bis(diorganophosphinomethyl)acridine Ligands

The search for an iron analog of the established ruthenium-based catalysts containing methylene-extended 4,5-bis(diorganophosphinomethyl)acridine ligands, [FeHCl(CO)(LR)], resulted in the discovery of a bidentate coordination mode of these usually tridentate pincer ligands toward iron. The acridines nitrogen atom does not coordinate to iron, leading to the formation of iron diphos-type complexes with unusually large cis bite angles of up to 124° as well as trans bite angles around 155°. The iron-containing complexes [FeCl2(κ2-LR)] (R = iPr, Ph), [FeX2(κ2-LCy)] (X = Cl, Br) and [Fe(CO)3(κ2-LR)] (R = iPr, Cy) have been isolated in crystalline form and characterized by spectroscopic methods and mass spectrometry. Their structures were verified unambiguously through X-ray diffraction. The stability of the iron(II) complexes decreased in the order Cy > Ph > iPr and Cl > Br > I, although all iron(II) complexes were found to be relatively stable enough for short-term handling in air in the solid state. Notably, no iron(0) complex of the phenyl derivative could be isolated. The iron(0) complex [Fe(CO)3(κ2-LCy)] was found to be significantly more stable toward hydrolysis and oxygen compared to [Fe(CO)3(κ2-LiPr)] and can be stored in air for months without significant decomposition in the solid state, while [Fe(CO)3(κ2-LiPr)] decomposes in air within seconds. The decomposition products [FeI2(κ2-O2LCy)], [{Fe(CO)3(κ2-HLR)}2] (R = iPr, Cy) and [FeCl2(CO)2(κ1-LCy)(κ1-OLCy)] were identified and characterized crystallographically. The iron(0) complex [Fe(CO)3(κ2-LCy)] is oxidized by [Fe(Cp)2](BPh4) to give the paramagnetic, low-spin iron(I) cation [Fe(CO)3(κ2-LCy)]+. The electron paramagnetic resonance spectrum of the highly sensitive cation as well as density functional theory calculations suggest a partial delocalization of the unpaired electron over the three carbonyl ligands and the acridines aromatic ring system. The catalytic activity and photophysical properties of the complexes have been preliminarily investigated.

5-Hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Biomass assumes an increasingly vital role in the realm of renewable energy and sustainable development due to its abundant availability, renewability, and minimal environmental impact. Within this context, 5-hydroxymethylfurfural (HMF), derived from sugar dehydration, stands out as a critical bio-derived product. It serves as a pivotal multifunctional platform compound, integral in synthesizing various vital chemicals, including furan-based polymers, fine chemicals, and biofuels. The high reactivity of HMF, attributed to its highly active aldehyde, hydroxyl, and furan ring, underscores the challenge of selectively regulating its conversion to obtain the desired products. This review highlights the research progress on efficient catalytic systems for HMF synthesis, oxidation, reduction, and etherification. Additionally, it outlines the techno-economic analysis (TEA) and prospective research directions for the production of furan-based chemicals. Despite significant progress in catalysis research, and certain process routes demonstrating substantial economics, with key indicators surpassing petroleum-based products, a gap persists between fundamental research and large-scale industrialization. This is due to the lack of comprehensive engineering research on bio-based chemicals, making the commercialization process a distant goal. These findings provide valuable insights for further development of this field.

Manganese-catalyzed oxidation of furfuryl alcohols and furfurals to efficient synthesis of furoic acids

Herein, the direct oxidation of furfuryl alcohols and furfurals to the corresponding furoic acids is performed highly efficiently with potassium hydroxide as the base in the presence of a catalytic amount of PNP pincer manganese catalyst in dioxane. The manganese catalytic system can not only achieve the dehydrogenation conversion of furfuryl alcohols to prepare furoic acids but can also achieve the synthesis of furoic acids from furfurals under more moderate conditions and with less reaction time. In addition, the bifunctional furfuryl alcohols or furfurals can also be efficiently converted into dicarboxylic acid products under optimal reaction conditions.

Two-dimensional single-crystalline mesoporous high-entropy oxide nanoplates for efficient electrochemical biomass upgrading

Mesoporous single crystals have received more attention than ever in catalysis-related applications due to their unique structural functions. Despite great efforts, their progress in engineering crystallinity and composition has been remarkably slower than expected. In this manuscript, a template-free strategy is developed to prepare two-dimensional high-entropy oxide (HEO) nanoplates with single-crystallinity and penetrated mesoporosity, which further ensures precise control over high-entropy compositions and crystalline phases. Single-crystalline mesoporous HEOs (SC-MHEOs) disclose high electrocatalytic performance in 5-hydroxymethylfurfural oxidation reaction (HMFOR) for efficient biomass upgrading, with remarkable HMF conversion of 99.3% and superior 2,5-furandicarboxylic acid (FDCA) selectivity of 97.7%. Moreover, with nitrate reduction as coupling cathode reaction, SC-MHEO realizes concurrent electrosynthesis of value-added FDCA and ammonia in the two-electrode cell. Our study provides a powerful paradigm for producing a library of novel mesoporous single crystals for important catalysis-related applications, especially in the two-electrode cell.

Half-Sandwich Iridium Complexes: A Recyclable and Stable Catalyst for Dehydrogenation of Alcohols to Carboxylic Acids

A series of acylhydrazone-based N,N-chelate half-sandwich iridium complexes have been synthesized through a facile route in good yields. The dehydrogenation of a series of aromatic and aliphatic primary alcohols to corresponding carboxylic acids has been accomplished catalyzed by the prepared air stable iridium complexes under mild reaction conditions. Carboxylic acids were obtained in high yields under open flask condition with broad substrates and good tolerance to sensitive functional groups. Such a half-sandwich iridium catalyst system exhibited high catalytic activity and stability, and a high TOF of 316.7 h-1 could be achieved with a catalyst loading as low as 0.05 mol %. Furthermore, the sustainable catalyst could be reused at least five times without obviously losing its activity, highlighting its potential application in industry. Molecular structure of iridium complex 1 was confirmed by single-crystal X-ray analysis.

Immobilised Ruthenium Complexes for the Electrooxidation of 5-Hydroxymethylfurfural

Abundantly available biomass-based platform chemicals, including 5-hydroxymethylfurfural (HMF), are essential stepping stones in steering the chemical industry away from fossil fuels. The efficient catalytic oxidation of HMF to its diacid derivative, 2,5-furandicarboxylic acid (FDCA), is a promising research area with potential applications in the polymer industry. Currently, the most encouraging approaches are based on solid-state catalysts and are often conducted in basic aqueous media, conditions where HMF oxidation competes with its decomposition. Efficient molecular catalysts are practically unknown for this reaction. In this study, we report on the synthesis and electrocatalysis of surface-bound molecular ruthenium complexes for the transformation of HMF to FDCA under acidic conditions. Catalyst immobilisation on mesoporous indium tin oxide electrodes is achieved through the incorporation of phosphonic acid anchoring groups. Screening experiments with HMF and further reaction intermediates revealed the catalytic route and bottlenecks in the catalytic synthesis of FDCA. Utilising these immobilised electrocatalysts, FDCA yields of up to 85 % and faradaic efficiencies of 91 % were achieved, without any indication of substrate decomposition. Surface analysis by X-ray photoelectron spectroscopy (XPS) post-electrocatalysis unveiled the desorption of the catalyst from the electrode surface as a limiting factor in terms of catalytic performance.

Bifunctional Ni Foam Supported TiO2 @Ni3 S2 core@shell Nanorod Arrays for Boosting Electrocatalytic Biomass Upgrading and H2 Production Reactions

Replacing traditional oxygen evoltion reaction (OER) with biomass oxidation reaction (BOR) is an advantageous alternative choice to obtain green hydrogen energy from electrocatalytic water splitting. Herein, a novel of extremely homogeneous Ni3 S2 nanosheets covered TiO2 nanorod arrays are in situ growth on conductive Ni foam (Ni/TiO2 @Ni3 S2 ). The Ni/TiO2 @Ni3 S2 electrode exhibits excellent electrocatalytic activity and long-term stability for both BOR and hydrogen evolution reaction (HER). Especially, taking glucose as a typical biomass, the average hydrogen production rate of the HER-glucose oxidation reaction (GOR) two-electrode system reached 984.74 µmol h-1 , about 2.7 times higher than that of in a common HER//OER two-electrode water splitting system (365.50 µmol h-1 ). The calculated power energy saving efficiency of the GOR//HER system is about 13% less than that of the OER//HER system. Meanwhile, the corresponding selectivity of the value-added formic acid produced by GOR reaches about 80%. Moreover, the Ni/TiO2 @Ni3 S2 electrode also exhibits excellent electrocatalytic activity on a diverse range of typical biomass intermediates, such as urea, sucrose, fructose, furfuryl alcohol (FFA), 5-hydroxymethylfurfural (HMF), and alcohol (EtOH). These results show that Ni/TiO2 @Ni3 S2 has great potential in electrocatalysis, especially in replacing OER reaction with BOR reaction and promoting the sustainable development of hydrogen production.

Effect of K+ and Ca2+ Cations on Structural Manganese(IV) Oxide for the Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

The promising influences of K+ and Ca2+ ions in the development of effective MnO2 for the selective oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid (FDCA) were studied for the catalytic performance under a high-pressure reaction of aqueous O2 (0.5 MPa) in a basic system. Various oxidation states of manganese in MnO2 were able to accelerate the oxidation of 5-formyl-2-furancarboxylic acid to FDCA in the rate-determining step. The results were in good agreement that Ca2+ played a key role in the highest FDCA yield up to 85% due to the associated cations on the local coordination to enhance the high surface area and the electronic effect on the manganese ion. Both K-MnO2 and Ca-MnO2 catalysts showed excellent catalytic activities without a significant change in the efficiency in the reusability experiments.

Combination of deep eutectic solvent and functionalized metal-organic frameworks as a green process for the production of 5-hydroxymethylfurfural and furfural from sugars

Biomass is an abundant and sustainable resource that can be converted into energy and chemicals. Therefore, the development of efficient methods for the conversion of biomass into platform intermediates is crucial. In this study, the one-pot conversion of sugars into 5-hydroxymethylfurfural (HMF) and furfural was achieved using the metal-organic framework combined with metal ions [MIL-101(Cr)] as a high-activity catalyst, and a deep eutectic solvent (choline chloride and lactic acid) as a green solvent. The optimal temperature, time, amount of catalyst used, and amount of deep eutectic solvent used were all determined. The highest HMF yield of 49.74% and furfural yield of 55.90% were obtained. The recyclability of the catalysts and deep eutectic solvent was also investigated. After three reaction runs, the HMF yield was still nearly 30.00%. Finally, the MIL-101(Cr) catalytic system was selected to study the kinetic mechanism underlying the conversion of glucose into HMF.

Selective and Robust Ru Catalyst for the Aqueous Phase Aerobic Oxidation of Furfural to 2-Furoic Acid

Synthesis of 2-furoic acid (FURA) via oxidation of furfural (FAL) is vital in evolving the biorefinery concept as FURA has numerous important applications in the pharmaceuticals and optic areas. Though few works on this reaction are done, those are marred with shortcomings such as the nonrecyclability of catalyst, dilute solutions, lower yields, or use of H2O2 as an oxidizing agent. Herein, we report catalytic aqueous phase oxidation of FAL to FURA using molecular oxygen as an oxidizing agent. For the synthesis of FURA, various catalysts with a combination of metal (Pt, Pd, Ru) and supports (carbon, Al2O3) were prepared and characterized by multiple techniques (X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS)). Oxidation of FAL carried out over 5 wt % Ru/C catalyst in the presence of Na2CO3 yielded 83% of FURA at 120 °C and 15 bar oxygen pressure. The catalyst could show potential for reusability as similar activity was achieved after subjecting the spent catalyst to mild reduction treatment (150 °C). Studies on the effects of temperature, pressure, and time could help accomplish enhanced yields of FURA. Additionally, learning about the effect of base (weak/strong/solid) revealed that due to the weak basicity of Na2CO3, higher yields could be achieved by maintaining approximately a pH of 11, which is optimal for suppressing side reactions. Under the given conditions, FURA is stable (>90%) and also adsorption studies divulge that it is immediately removed from the catalyst surface, and hence higher yields could be achieved in our catalytic system. Using the initial rates methodology, an activation energy of 21.91 kJ mol-1 was derived and also a high turn over frequency (TOF) (85.9 h-1) was observed under optimized conditions.

Electronic Modulation Induced by Ni-VN Heterojunction Reinforces Electrolytic Hydrogen Evolution Coupled with Biomass Upgrade

The renewable electricity-driven hydrogen evolution reaction (HER) coupled with biomass oxidation is a powerful avenue to maximize the energy efficiency and economic feedback, but challenging. Herein, porous Ni-VN heterojunction nanosheets on nickel foam (Ni-VN/NF) are constructed as a robust electrocatalyst to simultaneously catalyze HER and 5-hydroxymethylfurfural electrooxidation reaction (HMF EOR). Benefiting from the surface reconstruction of Ni-VN heterojunction during the oxidation process, the derived NiOOH-VN/NF energetically catalyzes HMF into 2,5-furandicarboxylic acid (FDCA), yielding the high HMF conversion (>99%), FDCA yield (99%), and Faradaic efficiency (>98%) at the lower oxidation potential along with the superior cycling stability. Ni-VN/NF is also surperactive for HER, exhibiting an onset potential of ≈0 mV and Tafel slope of 45 mV dec-1 . The integrated Ni-VN/NF||Ni-VN/NF configuration delivers a compelling cell voltage of 1.426 V at 10 mA cm-2 for the H2 O-HMF paired electrolysis, about 100 mV lower than that for water splitting. Theoretically, for Ni-VN/NF, the superiority in HMF EOR and HER is mainly dominated by the local electronic distribution at the heterogenous interface, which accelerates the charge transfer and optimize the adsorption of reactants/intermediates by modulating the d-band center, therefore being an advisable thermodynamic and kinetic process.

Cu-Based Bimetallic Catalysts for Electrocatalytic Oxidative Dehydrogenation of Furfural with Practical Rates

Electrocatalytic oxidative dehydrogenation (EOD) of aldehydes enables ultra-low voltage, bipolar H2 production with co-generation of carboxylic acid. Herein, we reported a simple galvanic replacement method to prepare CuM (M = Pt, Pd, Au, and Ag) bimetallic catalysts to improve the EOD of furfural to reach industrially relevant current densities. The redox potential difference between Cu/Cu2+ and a noble metal M/My+ can incorporate the noble metal on the Cu surface and enlarge its surface area. Particularly, dispersing Pt in Cu (CuPt) achieved a record-high current density of 498 mA cm-2 for bipolar H2 production at a low cell voltage of 0.6 V and a Faradaic efficiency of >80% to H2. Future research is needed to deeply understand the synergistic effects of Cu-M toward EOD of furfural, and improve the Cu-M catalyst stability, thus offering great opportunities for future distributed manufacturing of green hydrogen and carbon chemicals with practical rates and low-carbon footprints.

Syntheses and High Proton Conductivities of Two 3D Zr(IV)/Hf(IV)-MOFs from Furandicarboxylic Acid

With the gradual progress of research on proton-conducting metal-organic framework (MOFs), it has become a challenging task to find MOF materials that are easy to prepare and have low toxicity, high stability, and splendid proton conductivity. With the abovementioned objectives in mind, we selected the non-toxic organic ligand 2,5-furandicarboxylic acid and the low toxic quadrivalent metals zirconium(IV) or hafnium(IV) as starting materials and successfully obtained 2 three-dimensional porous MOFs, [M6O4(OH)4(FDC)4(OH)4(H2O)4] [M = ZrIV (1) and HfIV (2)], with ultrahigh water stability using a rapid and green synthesis approach. Their proton conductive ability is remarkable, thanks to the large number of Lewis acidic sites contained in their porous frameworks and the abundant H-bonding network, hydroxyl groups, as well as coordination and crystalline water molecules. The positive correlation of their proton conductivity with relative humidity (RH) and the temperature was observed. Notably, their optimized proton conductivities are 2.80 × 10-3 S·cm-1 of 1 and 3.38 × 10-3 S·cm-1 of 2 under 100 °C/98% RH, which are at the forefront of Zr(IV)/Hf(IV) MOFs with prominent proton conductivity. Logically, their framework features, nitrogen/water adsorption/desorption data, and activation energy values are integrated to deduce their proton conductivity and conducting mechanism differences.

Sustainable amidation through acceptorless dehydrogenative coupling by pincer-type catalysts: recent advances

The amide functional group is ubiquitous in living organisms, and is of particular importance in bioactive compounds and pharmaceuticals. Because of the prevalence and significance of the amide bond, considerable efforts have been invested throughout the years in developing new synthetic methodologies for its formation. Nevertheless, amide synthesis still largely relies on variants of the traditional condensation of carboxylic acids and amines, mediated by stoichiometric coupling reagents. This poses a sustainability challenge, since such reactions suffer from unfavorable atom and step economies, involve harmful chemicals and produce chemical waste. Hence, establishing sustainable approaches to amide synthesis is of great importance. Over the last two decades, we have developed homogeneous catalytic reactions for sustainable synthetic transformations, primarily based on transition metal complexes of pincer ligands. A considerable portion of these efforts has been devoted to acceptorless dehydrogenative coupling, including that of alcohols and amines through ruthenium-catalyzed reactions. These latter processes generate amides without resorting to coupling reagents and typically produce no waste, with their only byproduct being H2 gas, which is itself a valuable resource. In the present review, we chronicle our progress in this area of research since 2014. This includes the use of water and ammonia as amidation reagents, expanding the scope of amidation substrates and target amides, achieving milder reaction conditions, development of amidation-based liquid organic hydrogen carrier systems, and introduction of manganese-based catalysts.

Facile Amide Bond Formation with TCFH-NMI in an Organic Laboratory Course

A new undergraduate organic laboratory experiment has been developed for amide bond formation between biorenewable 2-furoic acid and either of two substituted piperazines to prepare medicinally relevant amide products using a procedure with industrial significance. The reactions proceeded smoothly under ambient conditions using the combination of N,N,N',N'-tetramethylchloroformamidinium hexafluorophosphate (TCFH) and N-methylimidazole (NMI) in a minimal volume of acetonitrile with a direct crystallization upon addition of water. Students successfully collected their product by filtration and then characterized it by NMR (¹H, ¹³C, COSY, DEPT-135, HSQC), IR, MS, and melting point. Students also explored the reaction mechanism and compared green chemistry aspects of their procedure with literature routes. A virtual version of the experiment was adapted for remote instruction.

A Diamine-Oriented Biorefinery Concept Using Ammonia and Raney Ni as a Multifaceted Catalyst

Diamines are important industrial chemicals. In this paper we outline the feasibility of lignocellulose as a source of diol-containing molecules. We also illustrate the possibility of turning these diols into their diamines in good to excellent yields. Central to these transformations is the use of commercially available Raney Ni. For diol formation, the Raney Ni engages in hydrogenation and often also demethoxylation, that way funneling multiple components to one single molecule. For diamine formation, Raney Ni catalyzes hydrogen-borrowing mediated diamination in the presence of NH₃.

Oxidation of Organic Compounds Using Water as the Oxidant with H2 Liberation Catalyzed by Molecular Metal Complexes

Oxidation reactions of organic compounds play a central role in both industrial chemical and material synthesis as well as in fine chemical and pharmaceutical synthesis. While traditional laboratory-scale oxidative syntheses have relied on the use of strong oxidizers, modern large-scale oxidation processes preferentially utilize air or pure O₂ as an oxidant, with other oxidants such as hydrogen peroxide, nitric acid, and aqueous chlorine solution also being used in some processes. The use of molecular oxygen or air as an oxidant has been very attractive in recent decades because of the abundance of air and the lack of wasteful byproduct generation. Nevertheless, the use of high-pressure air or, in particular, pure oxygen can lead to serious safety concerns with improper handling and also necessitates the use of sophisticated high-pressure reactors for the processes.Several research groups, including ours, have investigated in recent times the possibility of carrying out catalytic oxidation reactions using water as the formal oxidant, with no added conventional oxidants. Along with the abundant availability of water, these processes also generate dihydrogen gas as the reaction coproduct, which is a highly valuable fuel. Several well-defined molecular metal complexes have been reported in recent years to catalyze these unusual oxidative reactions with water. A ruthenium bipyridine-based PNN pincer complex was reported by us to catalyze the oxidation of primary alcohols to carboxylate salts with alkaline water along with H₂ liberation, followed by reports by other groups using other complexes as catalysts. At the same time, ruthenium-, iridium-, and rhodium-based complexes have been reported to catalyze aldehyde oxidation to carboxylic acids using water. Our group has combined the catalytic aqueous alcohol and aldehyde oxidation activity of a ruthenium complex to achieve the oxidation of biomass-derived renewable aldehydes such as furfural and 5-hydroxymethylfurfural (HMF) to furoic acid and furandicarboxylic acid (FDCA), respectively, using alkaline water as the oxidant, liberating H₂. Ruthenium complexes with an acridine-based PNP ligand have also been employed by our group for the catalytic oxidation of amines to the corresponding lactams, or to carboxylic acids via a deaminative route, using water. Similarly, we also reported molecular complexes for the catalytic Markovnikov oxidation of alkenes to ketones using water, similar to Wacker-type oxidation, which, however, does not require any terminal oxidant and produces H₂ as the coproduct. At the same time, the oxidation of enol ethers to the corresponding esters with water has also been reported. This account will highlight these recent advances where water was used as an oxidant to carry out selective oxidation reactions of organic compounds, catalyzed by well-defined molecular complexes, with H₂ liberation. The oxidation of alcohols, aldehydes, amines, alkenes, and enol ethers will be discussed to provide an outlook toward other functional groups' oxidation. We hope that this will aid researchers in devising other oxidative dehydrogenative catalytic systems using water, complementing traditional oxidative processes involving strong oxidants and molecular oxygen.

5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid on Noble Metal-Free Nanocrystalline Mixed Oxide Catalysts

Noble metal-free catalysts based on earth-abundant and inexpensive mixed oxides are active catalysts of all steps of the reaction cascade leading from 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) using tert-butyl hydroperoxide (TBHP) as oxidation agent. Catalysts covering the whole range of composition in the Cu-Mn and Co-Fe series have been prepared and characterised. The nature and composition of the catalyst strongly affect conversion and selectivity. The distribution of products indicates that radical-type oxygen species, deriving from the activation of TBHP, play a determining role in the reaction. The early steps of reaction mainly follow the pattern expected for heterogeneous Fenton catalysts. Mixed oxide catalysts are the most effective in further oxidation steps, leading to the formation of FDCA, both in the Cu-Mn and Co-Fe systems. This behaviour can be related to the distribution of charge in the mixed oxides, suggesting a possible implication of the lattice oxygen in the last reaction steps. The results provide indications on how to optimize the reaction and minimize the formation of byproducts (humins and oligomers).

Sustainable catalysis with fluxional acridine-based PNP pincer complexes

Because of the widespread use of fossil fuels and the resulting global warming, development of sustainable catalytic transformations is now more important than ever to obtain our desired fuels and building materials with the least carbon footprint and waste production. Many sustainable (de)hydrogenation reactions, including CO2 reduction, H2 carrier systems, and others, have been reported using molecular pincer complexes. A specific subset of pincer complexes containing a central acridine donor with flanking CH2PR2 ligands, known as acridine-based PNP pincer complexes, exhibit special reactivities that are not imitable by other PNP pincer complexes such as pyridine-based or (R2PCH2CH2)2NH type ligands. The goal of this article is to highlight the unique reactivities of acridine-based complexes and then investigate how these reactivities allow these complexes to catalyse many sustainable reactions that traditional pincer complexes cannot catalyse. To that end, we will initially go over the synthesis and structural features of acridine complexes, such as the labile coordination of the central N donor and the observed fac-mer fluxionality. Following that, distinct reactivity patterns of acridine-based complexes including their reactivity with acids and water will be discussed. Finally, we will discuss the reaction systems that have been developed with acridine complexes thus far, including the notable selective transformations of primary alcohols to primary amines using ammonia, N-heteroaromatic synthesis from alcohols and ammonia, oxidation reactions with water with H2 liberation, development of H2 carrier systems, and others, and conclude the article with future possible directions. We hope that the systemic study presented here will aid researchers in developing further sustainable reactions based on the unique acridine-based pincer complexes.

Dehydrogenative ester synthesis from enol ethers and water with a ruthenium complex catalyzing two reactions in synergy

We report the dehydrogenative synthesis of esters from enol ethers using water as the formal oxidant, catalyzed by a newly developed ruthenium acridine-based PNP(Ph)-type complex. Mechanistic experiments and density functional theory (DFT) studies suggest that an inner-sphere stepwise coupled reaction pathway is operational instead of a more intuitive outer-sphere tandem hydration-dehydrogenation pathway.