An Air-Stable "Masked" Bis(imino)carbene: A Carbon-Based Dual Ambiphile

Allenylidene Phosphonium Ion: An Isoelectronic Phosphorus Analogue of [3]Cumulene

Herein, we disclose the synthesis, characterization, and bonding analysis of a crystalline allenylidene phosphonium ion ([R2P═C═C═CAr2]+) [2]+ (R = 1,3-diisopropylphenylimidazolin-2-ylidenamino, CAr2 = 9-fluorenylidene), an isolobal analogue of [3]cumulenes. The cation was prepared via methoxide ion abstraction of an alkynyl phosphine 1. Electron rich N-heterocyclic imine substituents and a π conjugated fluorenyl scaffold together stabilize the resulting three-coordinate phosphonium center of [2]+. [2]+ features a trigonal planar phosphorus atom which is electrophilic, as evidenced experimentally by the preparation of a Lewis acid-base adduct with 4-dimethylaminopyridine, and fluoride ion affinity calculations. Crystallographic and computational investigations of [2]+ support a structure with considerable P═C double bond character. Furthermore, this P═C double bond participates in a thermally reversible intramolecular dearomative [2 + 2] cycloaddition with an arene moiety of one of its supporting 1,3-diisopropylphenylimidazolin-2-ylidenamino substituents to give a tetracyclic isomer [2cyclo]+. The isolation of a free [R2P═C═C═CAr2]+ draws further parallels between the properties and reactivity of low-coordinate phosphorus compounds and related carbon compounds.

Insertion of Nitriles Into a Gold(III)/Carbene Bond: A Direct and Powerful Entry to Imino-Substituted Carbenes

Strikingly, very little is known so far about reactive gold(III) carbenes. They have been proposed as key intermediates in a few reactions but remain chemical curiosities. Taking into account the enhanced electrophilicity of cationic Au(III) carbene complexes, we were intrigued by their reactivity with nitriles. Thus, we discovered a simple and efficient entry to imino-substituted carbenes. The transient (N^C^C)Au(III)←:CH(dmp)+ carbene readily reacts with acetonitrile, benzonitrile, and diisopropyl cyanamide, affording stable and isolable Au(III) carbene complexes. Here, the imino group acts either as a strongly π-donating or a spectator substituent. Ligand exchange at Au(III) or protodeauration/deprotonation provides access to the corresponding free species, which display dual imino-carbene / nitrile-ylide reactivity, as substantiated by stoichiometric and catalytic dimerization, O─H insertion and [3 + 2] cycloaddition reactions.

An Ambiphilic Phosphide with Three Different Coordination Modes to Group 7-10 Metals

Phosphide anions PX2- with electron-withdrawing substituents display ambiphilic properties. The use of P(V) thiophosphorane substituents enables the coordination of the resulting bis(thiophosphoranyl)phosphide anion (BTPP = L) to a variety of transition metals from groups 7 to 10. A series of homoleptic and heteroleptic complexes was synthesized and X-ray diffraction analysis revealed that, depending on the metal, L may adopt three coordination modes (κ3-(S, P, S); κ2-(S, S); κ2-(S, P)) supporting three distinct geometries (octahedral; tetrahedral; square planar). Complex L2Co displays Single Molecule Magnet (SMM) properties, and complex LRh(COD) (COD = 1,5-cyclooctadiene) catalyzes the hydrosilylation of terminal alkynes.

Bicyclic (alkyl)(amino)carbenes (BICAACs): synthesis, characteristics, and applications

Carbenes in general and isolable NHCs (N-heterocyclic carbenes) in particular have been useful ligands in recent years. The emergence of CAACs [cyclic(alkyl)(amino)carbenes], BICAACs [bicyclic(alkyl)(amino)carbenes], and many other carbenes has marked revolutionary milestones in this field. These carbenes possess an intriguing blend of highly electrophilic and nucleophilic characteristics, owing to their remarkably narrow HOMO-LUMO energy gap. The isolation and characterization of these carbenes hold significance not only due to their fascinating electronic properties but have demonstrated their prowess across various domains, including isolation of transition metal complexes, medicinal applications, catalysis, and radical stabilization. While the chemistry of 5-membered NHCs and CAACs has been extensively explored, the investigation of BICAACs has just begun. This review covers the synthesis, characterization, and reactivity of BICAACs and outlines the diverse applications of BICAACs in organometallic chemistry, metal-free catalysis, and main-group chemistry.

Strong Bases Design: Key Techniques and Stability Issues

Theoretical design of molecular superbases has been attracting researchers for more than twenty years. General approaches were developed to make the bases potentially stronger, but less attention was paid to the stability of the predicted structures. Hence, only a small fraction of the theoretical research has led to positive experimental results. Possible stability issues of extremely strong bases are extensively studied in this work using quantum chemical calculations on a high level of theory. Several step-by-step design examples are discussed in detail, and general recommendations are given to avoid the most common stability problems. New potentially stable structures are theoretically studied to demonstrate the future prospects of molecular superbases design.

Expedient Synthesis of Thermally Stable Acyclic Amino(haloaryl)carbenes: Experimental and Theoretical Evidence of "Push-Pull" Stabilized Carbenes

A library of novel structurally related singlet carbenes, namely, acyclic amino(haloaryl)carbenes, was designed by a high-yielding two-step procedure, and their chemical stability explored both experimentally and theoretically. Thanks to a careful selection of both the amino and the aryl substitution pattern, these carbenes exhibit a wide range of stability and reactivity, spanning from rapid self-dimerization for carbenes featuring ortho-F substituents to very high chemical stability as bare carbenes, up to 60 °C for several hours for compounds carrying ortho-Br substituents. Their structure was determined through NMR and X-ray diffraction studies, and their reactivity evaluated in benchmark reactions, highlighting the ambiphilic character of this novel class of singlet carbenes. In contrast with previously reported aryl substituents incorporating o-CF3 and t-Bu groups, which were considered "spectator", the high chemical stability of some of these carbenes relates to the stabilization of the σ-orbital of the carbene center by the π-accepting haloaryl substituent through delocalization. Kinetic protection of the carbene center is also provided by the ortho-halogen atoms, as demonstrated computationally. This push-pull stabilization effect makes acyclic amino(haloaryl) carbenes among the most ambiphilic stable carbenes reported to date, holding promise for a variety of applications.

Molecular-strain induced phosphinidene reactivity of a phosphanorcaradiene

Phosphanorcaradienes are an appealing class of phosphorus compounds that can serve as synthons of transient phosphinidenes. However, the synthesis of such species is a formidable task owing to their intrinsic high reactivity. Herein we report straightforward synthesis, characterization and reactivity studies of a phosphanorcaradiene, in which one of the benzene rings in the flanking fluorenyl substituents is intramolecularly dearomatized through attachment to the phosphorus atom. It is facilely obtained by the reduction of phosphorus(III) dichloride precursor with potassium graphite. Despite being thermally robust, it acts as a synthetic equivalent of a transient phosphinidene. It reacts with trimethylphosphine and isonitrile to yield phosphanylidene-phosphorane and 1-phospha-3-azaallene, respectively. When it is treated with one and two molar equivalents of azide, iminophosphane and bis(imino)phosphane are isolated, respectively. Moreover, it is capable of activating ethylene and alkyne to afford [1 + 2] cycloaddition products, as well as oxidative cleavage of Si-H and N-H bonds to yield secondary phosphines. All the reactions proceed smoothly at room temperature without the presence of transition metals. The driving force for these reactions is most likely the high ring-constraint of the three-membered PC2 ring and recovery of the aromaticity of the benzene ring.

Bending a Cumulene with Electrons: Stepwise Chemical Reduction and Structural Study of a Tetraaryl[4]Cumulene

Chemical reduction of a [4]cumulene with cesium metal was explored, and the structural changes stemming from electron acquisition are detailed using X-ray crystallography. It is found that the [4]cumulene undergoes dramatic geometric changes upon stepwise reduction, including bending of the cumulenic core and twisting of the endgroups from orthogonal to planar. The structural deformation is consistent with early theoretical reports that suggest that the twisting should occur upon reduction of both even and odd [n]cumulenes. The current results, on the other hand, are inconsistent with a previous experimental study of a [3]cumulene in which the predicted twisting is not observed upon reduction. DFT calculations reveal that the barrier to deformation is an order of magnitude lower in a [3]cumulene than a [4]cumulene, allowing the barrier to be overcome in the solid-state.

Recent advances in the chemistry of isolable carbene analogues with group 13-15 elements

Carbenes (R2C:), compounds with a divalent carbon atom containing only six valence shell electrons, have evolved into a broader class with the replacement of the carbene carbon or the RC moiety with main group elements, leading to the creation of main group carbene analogues. These analogues, mirroring the electronic structure of carbenes (a lone pair of electrons and an empty orbital), demonstrate unique reactivity. Over the last three decades, this area has seen substantial advancements, paralleling the innovations in carbene chemistry. Recent studies have revealed a spectrum of unique carbene analogues, such as monocoordinate aluminylenes, nitrenes, and bismuthinidenes, notable for their extraordinary properties and diverse reactivity, offering promising applications in small molecule activation. This review delves into the isolable main group carbene analogues that are in the forefront from 2010 and beyond, spanning elements from group 13 (B, Al, Ga, In, and Tl), group 14 (Si, Ge, Sn, and Pb) and group 15 (N, P, As, Sb, and Bi). Specifically, this review focuses on the potential amphiphilic species that possess both lone pairs of electrons and vacant orbitals. We detail their comprehensive synthesis and stabilization strategies, outlining the reactivity arising from their distinct structural characteristics.

One Dianionic Luminophore with Three Coordination Modes Binding Four Different Metals: Toward Unexpectedly Phosphorescent Transition Metal Complexes

This work reports on a battery of coordination compounds featuring a versatile dianionic luminophore adopting three different coordination modes (mono, bi, and tridentate) while chelating Pd(II), Pt(II), Au(III), and Hg(II) centers. An in-depth structural characterization of the ligand precursor (H2 L) and six transition metal complexes ([HLPdCNtBu], [LPtCl], [LPtCNtBu], [LPtCNPhen], [HLHgCl], and [LAuCl]) is presented. The influence of the cations and coordination modes of the luminophore and co-ligands on the photophysical properties (including photoluminescence quantum yields (ΦL ), excited state lifetimes (τ), and average (non-)radiative rate constants) are evaluated at various temperatures in different phases. Five complexes show interesting photophysical properties at room temperature (RT) in solution. Embedment in frozen glassy matrices at 77 K significantly boosts their luminescence by suppressing radiationless deactivation paths. Thus, the Pt(II)-based compounds provide the highest efficiencies, with slight variations upon exchange of the ancillary ligand. In the case of [HLPdCNtBu], both ΦL and τ increase over 30-fold as compared to RT. Furthermore, the Hg(II) complex achieves, for the first time in its class, a ΦL exceeding 60% and millisecond-range lifetimes. This demonstrates that a judicious ligand design can pave the way toward versatile coordination compounds with tunable excited state properties.

Synthesis and reactivity of N-heterocyclic carbene (NHC)-supported heavier nitrile ylides

The synthesis and isolation of stable heavier analogues of nitrile ylide as N-heterocyclic carbene (NHC) adducts of phosphasilenyl-tetrylene [(NHC)(TerAr)Si(H)PE14(TerAr)] (E14 = Ge 1, Sn 2; TerAr = 2,6-Mes2C6H3, NHC = IMe4) are reported. The delocalized Si-P-E14 π-conjugation was examined experimentally and computationally. Interestingly, the germanium derivative 1 exhibits a 1,3-dipolar nature, leading to an unprecedented [3 + 2] cycloaddition with benzaldehyde, resulting in unique heterocycles containing four heteroatoms from group 14, 15, and 16. Further exploiting the nucleophilicity of germanium, activation of the P-P bond of P4 was achieved, leading to a [(NHC)(phosphasilenyl germapolyphide)] complex. Moreover, the [3 + 2] cycloaddition and the σ-bond activation by 1 resemble the characteristics of the classic nitrile ylide.

Iron-Imine Cocktail in Drug Development: A Contemporary Update

Organometallic drug development is still in its early stage, but recent studies show that organometallics having iron as the central atom have the possibility of becoming good drug candidates because iron is an important micro-nutrient, and it is compatible with many biological systems, including the human body. Being an eco-friendly Lewis acid, iron can accept the lone pair of electrons from imino(sp2)-nitrogen, and the resultant iron-imine complexes with iron as a central atom have the possibility of interacting with several proteins and enzymes in humans. Iron-imine complexes have demonstrated significant potential with anticancer, bactericidal, fungicidal, and other medicinal activities in recent years. This article systematically discusses major synthetic methods and pharmacological potentials of iron-imine complexes having in vitro activity to significant clinical performance from 2016 to date. In a nutshell, this manuscript offers a simplistic view of iron complexes in medicinal inorganic chemistry: for instance, iron is presented as an "eco-friendly non-toxic" metal (as opposed to platinum) that will lead to non-toxic pharmaceuticals. The abundant literature on iron chelators shows that many iron complexes, particularly if redox-active in cells, can be quite cytotoxic, which can be beneficial for future targeted therapies. While we made every effort to include all the related papers, any omission is purely unintentional.

A crystalline doubly oxidized carbene

The chemistry of carbon is governed by the octet rule, which refers to its tendency to have eight electrons in its valence shell. However, a few exceptions do exist, for example, the trityl radical (Ph3C∙) (ref. 1) and carbocation (Ph3C+) (ref. 2) with seven and six valence electrons, respectively, and carbenes (R2C:)-two-coordinate octet-defying species with formally six valence electrons3. Carbenes are now powerful tools in chemistry, and have even found applications in material and medicinal sciences4. Can we undress the carbene further by removing its non-bonding electrons? Here we describe the synthesis of a crystalline doubly oxidized carbene (R2C2+), through a two-electron oxidation/oxide-ion abstraction sequence from an electron-rich carbene5. Despite a cumulenic structure and strong delocalization of the positive charges, the dicoordinate carbon centre maintains significant electrophilicity, and possesses two accessible vacant orbitals. A two-electron reduction/deprotonation sequence regenerates the parent carbene, fully consistent with its description as a doubly oxidized carbene. This work demonstrates that the use of bulky strong electron-donor substituents can simultaneously impart electronic stabilization and steric protection to both vacant orbitals on the central carbon atom, paving the way for the isolation of a variety of doubly oxidized carbenes.

Dearomatization of C6 Aromatic Hydrocarbons by Main Group Complexes

The dearomatization reaction is a powerful method for transformation of simple aromatic compounds to unique chemical architectures rapidly in synthetic chemistry. Over the past decades, the chemistry in this field has evolved significantly and various important organic compounds such as crucial bioactive molecules have been synthesized through dearomatization. In general, photochemical conditions or assistance by transition metals are required for dearomatization of rigid arenes. Recently, main-group elements, especially naturally abundant elements in the Earth's crust, have attracted attention as they have low toxicity and are cost-effective compared to the late transition metals. In recent decades, a variety of low-valent main-group molecules, which enable the activation of stable aromatic compounds under mild conditions, have been developed. This minireview highlights the developments in the chemistry of dearomatization of C6 aromatic hydrocarbons by main-group compounds leading to the formation of seven-membered EC6 (E=main-group elements) ring or cycloaddition products.

Evidence for Carbene Intermediates in Isocyanide Homologation by Aluminium(I)

The C-C bond formation between C1 molecules plays an important role in chemistry as manifested by the Fischer-Tropsch (FT) process. Serving as models for the FT process, we report here the reactions between a neutral AlI complex (Me NacNac)Al (1, Me NacNac=HC[(CMe)(NDipp)]2 , Dipp=2,6-diisopropylphenyl) and various isocyanides. The step-by-step coupling mechanism was studied in detail by low-temperature NMR monitoring, isotopic labeling, as well as quantum chemical calculations. Three different products were isolated in reaction of 1 with the sterically encumbered 2,6-bis(benzhydryl)-4-Me-phenyl isocyanide (BhpNC). These products substantiate carbene intermediates. The reaction between 1 and adamantyl isocyanide (AdNC) generated a trimerization product, and a corresponding carbene intermediate could be trapped in the form of a molybdenum(0) complex. Tri-, tetra-, and even pentamerization products were isolated with the sterically less congested phenyl and p-methoxyphenyl isocyanides (PhNC and PMPNC) with concurrent construction of quinoline or indole heterocycles. Overall, this study provides evidence for carbene intermediates in FT-type chemistry of aluminium(I) and isocyanides.

A Donor-Acceptor Cyclopropane by Intramolecular C(sp3)-H Activation at a Cyclic(alkyl)(amino)carbene Center and Its Fascinating Ring-Opening Chemistry

Virtually irreversible intramolecular C-H activations are deleterious for aza-carbenes. A picolyl-tethered cyclic(alkyl)(amino)carbene (CAAC) isomerizes into a donor-acceptor cyclopropane in this manner but restores the CAAC status by retro-C-H activation in the presence of trapping agents like Se or CuCl. The same DA cyclopropane is readily hydrolyzed to a pyrrolidin-2-ol that acts as another ^picoCAAC precursor by undergoing 1,1-dehydration in the presence of Se or CuCl. The chemistry is distinct from the N-heterocyclic carbene analogue throughout.

Cyclic alkyl(amino)iminates (CAAIs) as strong 2σ,4π-electron donor ligands for the stabilisation of boranes and diboranes(4): a synthetic and computational study

Singly and doubly cyclic alkyl(amino)iminate (CAAI)-substituted boranes and diboranes(4) were synthesised by halosilane elimination between a silylimine and halo(di)borane precursors. ¹¹B NMR-spectroscopic studies show that the CAAI ligand is a much stronger electron donor than amino ligands. X-ray crystallographic analyses reveal that the degree of B-N_CAAI double bonding increases with the electron-withdrawing capacity of the other substituents at boron. The C-N-B bond angle displays a great flexibility, ranging from 131° to near-linear 176°, the narrowest angles being observed for NMe₂-substituted derivatives and the widest angles for highly sterically demanding substituents. Density functional theory (DFT) calculations on the electronic structures of the anionic CAAI ligand compared to unsaturated and saturated N-heterocyclic iminate (NHI) ligands show that the former is the best σ donor of the three but less π-donating than the unsaturated NHI. Nevertheless, the linear (CAAI)BH₂ complex displays somewhat stronger C-N and N-B π bonding than the corresponding ((S)NHI)BH₂ complexes.