Cyclodextrin Incorporation into Covalent Organic Frameworks Enables Extensive Liquid and Gas Chromatographic Enantioseparations

Enhanced field-amplified sample injection by mobility decrease in capillary electrophoresis for the analysis of trace enantiomeric impurities in palonosetron injection

Palonosetron hydrochloride [PALO (3aS, 2S)] is a highly selective second generation 5-HT3 receptor antagonist with two asymmetric carbon atoms in molecular structure. For chiral drugs, detection of the enantiomeric impurity is critical for drug safety and efficacy, because the undesired enantiomer can cause adverse effects or reduce the drug's therapeutic effect. In this work, the mechanism of online preconcentration in the analysis of PALO injection using micellar electrokinetic chromatography (MEKC) with bile salt sodium taurocholate (STC) as chiral selector was studied, based on the background difference between sample solution and background electrolyte (BGE). In addition to the field amplified sample stacking due to the conductivity difference between the sample plug and BGE, the disassociation of protonated solutes with positive charge caused by the pH increase and the distribution of solutes into STC micelles with negative charge result in a significant decrease in effective mobility, when they enter the BGE. This, combined with a reduction in field strength, causes the solutes slow down quickly and stack at the interface between sample plug and BGE. However, achieving the analysis of all three possible enantiomeric impurities in hydrodynamic injection mode is challenging due to poor separation. This is caused by the long effective capillary length consumed during online preconcentration and the wide solute band eventually focused if enough sample solution is injected. This issue was resolved by using electrokinetic injection mode, where solutes are driven into the capillary by both electric field and electroosmotic flow and stack at the interface meanwhile. As a result, a sufficient amount of solutes can be injected in a shorter sample plug compared to hydrodynamic injection mode. The method achieved a limit of detection of 0.014 μg mL-1 and a limit of quantification of approximately 0.05 μg mL-1 for enantiomeric impurities, without compromising the separation. Those are 0.03 % and 0.10 % of the content of main ingredient, respectively, representing nearly a ten-fold improvement in sensitivity over our previous works. Other quantitative data include a linear range of 0.05-0.50 μg mL-1, a coefficient of determination (R2) of 0.993-0.998, a spike recovery of 96.1-100.6 %, and a precision (RSD) of 2.2 % and 3.6 % for the intra-day and inter-day analysis, respectively. For the first time, the identification and quantification of trace amount of enantiomeric impurity in real sample of PALO drug was successfully achieved using MEKC with bile salt as chiral selector.

Crystalline, Porous Figure-Eight-Noded Covalent Organic Frameworks

Figure-eight macrocycles represent a fascinating class of π-conjugated units characterized by unique aesthetics and non-contact molecular crossing at the center. Despite progress in synthesis over the past century, research into inorganic, organic, and polymeric figure-eight materials remains in its infancy. Here we report the first examples of figure-eight covalent organic frameworks by condensing figure-eight knots to create extended porous figure-eight π architectures. A distinct feature is that polymerization interweaves figure-eight knots into double-decker layers, which upon supramolecular polymerization organize well-defined layer frameworks. The figure-eight frameworks exhibit a band gap of 2.3 eV and emit bright orange florescence with benchmark quantum yields. Remarkably, the donor-acceptor figure-eight skeletons convert the figure-eight knots into reduction centers and the linkers into oxidation sites upon light irradiation, enable charge transport and accumulation through π columns, while the built-in hydrophilic micropores allow rapid water and oxygen delivery via capillary effect. With these distinct features, the figure-eight frameworks function as a photocatalyst to produce hydrogen peroxide at high rate and efficiency with water/saltwater, oxygen/air, and light as sole inputs. This work paves a way to a new class of molecular frameworks, underpinning the study of well-defined figure-eight materials to explore unprecedented structures and functions so far we untouched.

Next-Generation Chromatography: Covalent Organic Frameworks in Biomedical Analysis

Chromatography, a cornerstone technique in analytical chemistry, continues to evolve with the emergence of novel stationary phases. Covalent organic frameworks (COFs) have garnered significant attention due to their unique properties and versatile applications. COFs, composed of covalently linked organic building blocks, exhibit high surface area, tunable porosity, and exceptional chemical stability. These attributes make them next-generation chromatographic techniques that leverage novel materials and methodologies to achieve significant improvements in separation efficiency, selectivity, speed, and/or sensitivity compared to traditional methods. COF stationary phases demonstrate remarkable selectivity for small molecules, peptides, proteins, and nucleic acids. Their use in drug discovery, metabolomics, proteomics, and clinical diagnostics is gaining momentum. In this review, we explored their synthesis strategies, emphasizing the design principles that enable tailoring of their physicochemical properties. Further, we discuss the immobilization of COFs onto solid supports, ensuring their compatibility with existing chromatographic systems. Furthermore, we highlighted case studies where COFs outperformed traditional stationary phases, improving sensitivity and resolution. We delve into the integration of COFs as stationary phases in biomedical analysis and explore various strategies for utilizing COFs as stationary phases in chromatographic separations.

General synthesis of covalent organic frameworks under ambient condition within minutes via microplasma electrochemistry approach

Covalent organic frameworks (COFs) are typically synthesized using solvothermal conditions with high temperature and long reaction time (≥120 °C, >72 h). Herein, we report a general and rapid microplasma electrochemistry strategy to synthesize COFs under ambient conditions. A series of flexible imine-bond COFs with high-crystallinity were prepared in minutes via this method, which showed 1000-fold higher space-time yield than solvothermal method. This approach also achieved the preparation of COFs with diverse linkages including rigid imine, hydrazone, β-ketoenamies and azine linkages. Moreover, four types of imine-based COFs were successfully synthesized in aqueous acetic acid, which avoided the use of harmful organic solvents, indicating that microplasma method is green and versatile for COF synthesis. The obtained COFs showed higher surface area and exhibited superior performance in volatile iodine uptake compared to those COFs prepared by solvothermal method. After screening more than ten types of COFs, the iodine adsorption capacity could be promoted from 2.81 to 6.52 g g-1. The efficiency, versatility, and simplicity of the microplasma method render it as a promising approach for the swift screening of COFs across a wide range of applications.

Engineering Helical Chirality in Metal-Coordinated Cyclodextrin Nanochannels

Helicates are a defining element of DNAs and proteins, with functions that are critical to a variety of biological processes. Cyclodextrins are promising candidates for forging multiple-stranded helicates with well-defined helicity, but a lack of available tools has precluded the construction of artificial helical nanochannels with a controllable geometry and helicity from these widely available chiral building blocks. Herein, we disclose a family of Ag6L2 helical nanochannels that can be readily assembled from α-cyclodextrin-derived ligands through coordination between pyridinyl groups and Ag+ cations. We discovered that the nanochannels exhibit either an M or a P helicity when the Ag+ cations adopt a tetrahedral coordination geometry while losing most of their helicity when the Ag+ cations are linearly coordinated. Both the geometry and helicity of the nanochannels can be precisely controlled by simply changing the number of methyl groups at the ortho positions of the pyridinyl ligands. The tetracoordinated Ag+ cations interconnect the helical nanochannels into an infinite two-dimensional coordinative network characterized by hexagonal tessellation. Theoretical calculations, which reveal lower energies of the helical conformations observed in crystals compared with those of their inverted counterparts, support the experimental results.

Highly Enantioselective Transportation Across Liquid Membranes Mediated by Porous Covalent Organic Frameworks

Chiral liquid membrane separation is crucial in pharmaceuticals and chemical synthesis for its simplicity and stability, yet designing membrane carriers that enable efficient enantioseparation remains a challenge. Here, we demonstrated for the first time that chiral porous materials can act as mobile carriers of bulk liquid membranes (BLMs) to enhance enantioselective transport and separation. We design and prepare three 2D chiral covalent organic frameworks (CCOFs) by imine condensations of a chiral dialdehyde with triamines containing ethyl, fluorine and/or isopropyl groups. These isostructural CCOFs feature ABC stacking, excellent water, acid and base tolerance, and chiral amine groups in 1D porous channels, promoting efficient enantioselective transportation of amino acid enantiomers. Among them, the CCOF with both -F and -iPr groups showing superior transport performance. Exfoliating the CCOF into chiral nanosheets creates flexible layers with accessible active sites, enabling nanosheet-mediated liquid membranes to separate chiral drug enantiomers, a feat unattainable with the pristine CCOF. This work establishes CCOFs as a promising platform for chiral BLM separations and will guide the design of high-performance BLMs using porous materials for enantioselective separation.

Solid-Liquid-Gas Three-Phase Indirect Electrolysis Enabled by Affinity Auxiliary Imparted Covalent Organic Frameworks

The design of efficient heterogeneous redox mediators with favorable affinity to substrate and electrolyte are much desired yet still challenging for the development of indirect electrolysis system. Herein, for the first time, we have developed a solid-liquid-gas three-phase indirect electrolysis system based on a covalent organic framework (Dha-COF-Cu) as heterogeneous redox mediator for S-S coupling reaction. Dha-COF-Cu with the integration of high porosity, nanorod morphology, abundant hydroxyl groups and active Cu sites is much beneficial for the adsorption/activation of thiols, uniform dispersion and high wettability in electrolyte, and efficient interfacial electron transfer. Notably, Dha-COF-Cu as solid-phase redox mediator exhibits excellent electrocatalytic efficiency for the formation of value-added liquid-phase S-S bond product (yields up to 99 %) coupling with the generation of gas-phase product of H2 (~1.40 mmol g-1 h-1), resulting in a powerful three-phase indirect electrolysis system. This is the first work about COFs that can be applied in three-phase indirect electrolysis system, which might promote the development of porous crystalline materials in this field.

Strong Electrochemiluminescence Response Derived from Ionic Chiral Covalent Organic Frameworks for Enantioselective Discrimination of Amino Acid Enantiomers via an Electrostatic Attraction Effect

Porous chiral materials accompanied by electrochemiluminescence (ECL) activity are rarely reported for enantioselective discrimination because of the big challenges to integrate the stereogenic center and ECL-active unit in the backbone. In the present study, ionic chiral covalent organic frameworks (iCCOFs) consisting of the pyridinium unit as the ECL-active species were prepared by a facile strategy. We were amazed that such iCCOFs could display strong cathodic ECL responses. Meanwhile, the as-prepared ECL-active iCCOFs performed enantioselective ECL quenching toward amino acid enantiomers, attributed to the enhanced photoinduced electron transfer process derived from the formed complex between the iCCOFs and amino acids via an electrostatic attraction effect. The iCCOF with an (S)-configuration was prone to interact with l-amino acids, producing a lower ECL intensity. The maximum intensity ratio between the d- and l-enantiomers was 33.0. Finally, the enantiomeric compositions of the measured amino acids presented a good linear relation with the obtained ECL intensity, which was fit for the determination of samples with unknown enantiomeric purity. In brief, the obtained results convince us that this study advances a new generation of ECL-active iCCOFs and displays great potential in enantioselective sensing.

Cyano-modified molecular cage silica gel stationary phase: Multi-functional chromatographic performance by high-performance liquid chromatography

This study successfully prepared different loading levels of cyano-functionalized RCC3 molecular cage silica gel stationary phase (RCC3-CN@SiO2) through aldehyde-amine condensation reaction and subsequent modification strategies. Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption-desorption, and scanning electron microscopy confirmed the successful synthesis of RCC3-CN@SiO2 chromatographic stationary phase. The research demonstrates that due to hydrophobic/hydrophilic interactions, π-π interactions, hydrogen bonding, and size-selective porous structure, the stationary phase effectively separates moderately polar and weakly polar compounds in reversed-phase liquid chromatography (RPLC) mode, exhibiting hydrophobic selectivity comparable to the commercial DaisoC18-RP columns. Additionally, the tertiary amine and cyanogen groups on the molecular cage surface enhance the interaction with polar compounds, successfully separating nucleosides, sulfonamides, amino acids, and sugars in hydrophilic interaction chromatography (HILIC) mode. Further applications in the separation analysis of acidic drugs, alkaline drugs, cinnamic acid natural products, and chiral compounds demonstrate the multifunctional chromatographic capabilities for diverse compound types. Compared to Unitary Diol commercial columns, the prepared stationary phase showed significant advantages in wide polarity range separation performance. Moreover, through nucleoside compound separation mode switching analysis, RCC3-CN@SiO2 stationary phase further validates its favorable performance in both RPLC and HILIC modes, demonstrating extensive potential applications in the field of analytical chemistry. Importantly, the stationary phase exhibits efficient separation of nucleoside compounds in pure water systems, aligning with the principles of green analysis.

Novel Top-Down Synthesis of Covalent Organic Frameworks for Uranyl Ion Capture

Seeking novel synthetic methodology to further promote the preparation of covalent organic frameworks (COFs) has long been our pursuit but remains a challenging task. Herein, we report a new protocol, a top-down approach for facile synthesis of COFs. Interestingly, our top-down route can impressively generate extended COFs by reticular chemistry which cannot be accessed by the commonly used bottom-up synthesis route. Notably, our top-down method also has outstanding advantages in achieving what we are pursuing in COFs, such as heteropores and multiple components. The current findings not only dramatically reduce the difficulty of COF synthesis but also are generally applicable for the synthesis of complicated COFs constructed from different building blocks and linkages.

Dialdehyde cellulose-based mixed-mode stationary phases for diversified high-performance liquid chromatography separations

To deal with complicated separation situations, this study successfully prepared two mixed-mode chromatography (MMC) stationary phases, CCL-SIL and PCL-SIL, by functionalizing dialdehyde cellulose (DAC) derivatives. In liquid chromatography applications, CCL-SIL exhibited superior separation performance for nucleosides and bases in HILIC mode, while PCL-SIL performed better in RPLC and IEC modes. Their distinct separation mechanisms were also elucidated by quantum chemical calculations. Both CCL-SIL and PCL-SIL showed good stability and reproducibility, with relative standard deviations of retention time, peak area, and peak height below 7.79 % and 4.37 % for multiple injections. Particularly, the PCL-SIL column and the CCL-SIL column were successfully used for the quantitative analysis of trace targets in real samples with complex matrix, demonstrating high accuracy and precision.

Helicene Covalent Organic Frameworks for Robust Light Harvesting and Efficient Energy Transfers

Helicenes represent a class of fascinating π compounds with fused yet folded backbones. Despite their broad structural diversity, harnessing helicenes to develop well-defined materials is still a formidable challenge. Here we report the synthesis of crystalline porous helicene materials by exploring helicenes to synthesize covalent 2D lattices and layered π frameworks. Topology-directed polymerization of [6]helicenes and porphyrin creates 2D covalent networks with alternate helicene-porphyrin alignment along the x and y directions at a 1.5-nm interval and develops [6]helicene frameworks through reversed anti-AA stack along the z direction to form segregated [6]helicene and porphyrin columnar π arrays. Notably, this π configuration enables the frameworks to be highly red luminescent with benchmark quantum yields. The [6]helicene frameworks trigger effieicnt intra-framework singlet-to-singlet state energy transfer from [6]helicene to porphyrin and facilitate intermolecular triplet-to-triplet state energy transfer from frameworks to molecular oxygen to produce reactive oxygen species, harvesting a wide range of photons from ultraviolet to near-infrared regions for light emitting and photo-to-chemical conversion. This study introduces a new family of extended frameworks, laying the groundwork for exploring well-defined helicene materials with unprecedented structures and functions.

Chiral Metal-Organic Framework Films with Ordered Macropores for Enantioselective Analysis of Proteins

Chiral film-based sensors show great promise for discriminating between enantiomers due to their miniaturization and low power consumption. However, their practical use is hindered by the trade-off between enantioselectivity and mass transfer capability, especially concerning biomacromolecules such as proteins. In this work, we present an effective and straightforward method for creating highly organized macropores within crystalline chiral metal-organic framework (CMOF) films. This approach harnesses the shaping influence of a polystyrene nanosphere template and the crystallization induced by the liquid dielectric barrier discharge plasma. The resultant highly ordered macro-microporous structures improve mass diffusion and access to chiral active sites in the hierarchical CMOF films. Coupled with their inherent chirality, strong fluorescence emission, high crystallinity, and exceptional stability, these attributes endow these CMOF films with enhanced sensing capabilities for chiral molecules. Particularly, the macro-microporous structure facilitates efficient protein recognition, overcoming a significant challenge encountered by MOFs due to protein dimensions surpassing MOF pore sizes. These films exhibit increased enantioselectivity, better limits of detection, and wider linear ranges compared with purely microporous CMOF films. This study thus provides a powerful synthetic approach for hierarchical CMOF films, addressing the limitations of traditional thin film sensors and opening an avenue for efficient chiral sensing of large biomacromolecules.

Recent Advances in the Utilization of Chiral Covalent Organic Frameworks for Asymmetric Photocatalysis

The use of light energy to drive asymmetric organic transformations to produce high-value-added organic compounds is attracting increasing interest as a sustainable strategy for solving environmental problems and addressing the energy crisis. Chiral covalent organic frameworks (COFs), as porous crystalline chiral materials, have become an important platform on which to explore new chiral photocatalytic materials due to their precise tunability, chiral structure, and function. This review highlights recent research progress on chiral COFs and their crystalline composites, evaluating their application as catalysts in asymmetric photocatalytic organic transformations in terms of their structure. Finally, the limitations and challenges of chiral COFs in asymmetric photocatalysis are discussed, with future opportunities for research being identified.

Chiral ionic organic single-crystal and its exfoliated two-dimensional nanosheets with enhanced enantioseparation

A chiral ionic organic single-crystal (CIOC) was prepared for the first time through ionic self-assembly using bipyridium chiral ionic liquid (CIL) and 4,4'-biphenyldisulfonic acid (BDA). The CIOC can be ultrasonically exfoliated to produce two-dimensional nanosheets (2D-NSs). The 2D-NSs presented enhanced enantioseparation compared to the CIOC and CIL when used as gas chromatography stationary phase, which may be due to the exfoliated 2D-NSs exhibiting greater exposure of functional groups. Additionally, better resolution of other organic compounds such as positional isomers, n-alkanes and n-alkanols, Grob mixture, phenols and anilines was obtained in 2D-NSs than CIOC and CIL. This work not only provides a reference for the preparation of chiral ionic organic single-crystals and two-dimensional nanosheets for chiral separation, but also stimulates the preparation of such new ionic organic single-crystals via self-assembly for other potential applications.

The series of L-lysine-derived gelators-modified multifunctional chromatography stationary phase for separation of chiral and achiral compounds

In this study, using chiral L-lysine as the molecular skeleton, three kinds of L-lysine-derived gelators (GBLB, GBLF and GFLF) were synthesized and then bonded to the surface of silica matrix (5 μm) by amide condensation to prepare a series of multifunctional chromatography stationary phases (GBLB-SiO2, GBLF-SiO2, and GFLF-SiO2) were prepared. The L-lysine-derived gelators not only possess chiral recognition ability, but also can spontaneously form oriented and ordered network structures in liquid medium through the interaction of non-covalent bonding forces such as hydrogen bonding, π-π stacking, and van der Waals forces. The comprehensive effect of multiple weak interaction sites enhances the molecular recognition ability and further improves the separation diversity of different types of compounds on stationary phases. The separation and evaluation of chiral compounds showed that benzoin, 1-phenyl-ethanol, 1-phenyl-propanol and 6-hydroxyflavanone could be separated in normal phase mode (NPLC). The separation of different types of non-chiral compounds, such as sulfonamides, nucleosides, nucleobases, polycyclic aromatic hydrocarbons (PAHs), anilines, and aromatic acids, were achieved in hydrophilic interaction/reversed-phase/ion-exchange mode (HILIC/RPLC/IEC), and the separation of polarized compounds could be performed under the condition of ultrapure water as the mobile phase, which has the typical retention characteristics of per aqueous liquid chromatography (PALC). The effects of organic solvent content, temperature, pH value, and buffer salt concentration on the retention and separation performance of the column were investigated. Comparison of the three prepared columns showed that the separation performance (such as aromatic selectivity) could be improved by increasing the types of functional groups on the surface of the stationary phase and the number of aromatic groups. In a word, the prepared stationary phase have multiple retention properties, can simultaneously separate chiral compounds and various types of achiral compounds. This work provides an idea for developing multifunctional liquid chromatography stationary phase materials, and further expands the application of gelators in separation science.

Electrochemical identification of reductive enantiomers in wood channels: A low-cost and scalable platform for chiral sensing

Chirality, an inherent characteristic of natural substances (such as sugars, peptides, proteins, and nucleic acid), plays a vital role in human metabolism and exerts substantial impacts. In general, chiral drugs can display diverse pharmacological and pharmacokinetic properties. One enantiomer may exhibit therapeutic effects, while the other could cause adverse reactions. Selective recognition of enantiomers is thus a significant task in the biomolecular and pharmaceutical fields. Despite the development of several chiral identification techniques, low-cost enantioselective sensing methods remain highly desirable. Here, we designed and developed an electrochemical sensing device for reductive enantiomer identification using natural wood channels as the substrate. The wood channels were endowed with oxidase-like activity through the in-situ growth of cerium oxide nanoparticles (CeO2). Chiral recognition capability was further introduced by incorporating a layer of chiral ZIF-8 (L-ZIF) as the chiral selector. To demonstrate the enantioselective sensing performance, 3,4-dihydroxyphenylalanine (DOPA) enantiomers were employed as model analytes. Due to the oxidase-like activity and the confinement effect of the proposed channels, the captured DOPA enantiomers were effectively oxidized to their quinone structure, and the Ce(IV) in CeO2 was reduced to Ce(III). These changes led to alterations in the surface charge of the channels, thereby modulating their ionic transport properties. This sensing mechanism also proved useful for the identification of other reductive enantiomers. The limits of detection for l-DOPA and d-DOPA were determined as 2.41 nM and 1.56 nM, respectively. The resulting wood channel-based sensing device not only can be used for the recognition and detection of reductive enantiomers, but also is expected to be applied to the non-electochemically active substances. Moreover, this study offers a novel type of solid-state channel material with low cost, reproducibility, and easy accessibility for electrochemical chiral sensing.

Propanediamine modified pillar[5]arene: A novel stationary phase for the high selectivity separation of versatile analytes

The unique properties of pillar[5]arene, including hydrophobic cavities, π-π conjugated and easy modification, make it a promising candidate as stationary phase for HPLC. Herein, we fabricated a novel propanediamine modified pillar[5]arene bonded silica as the stationary phase (PDA-BP5S) for reversed-phase liquid chromatography (RPLC). Benefiting from the significant hydrophobicity, π-π conjugative, p-π effect, and hydrogen bonding, the PDA-BP5S packed column showed high separation performance of versatile analytes involving polycyclic aromatic hydrocarbons, alkyl benzenes, phenols, arylamine, phenylethane/styrene/ phenylacetylene, toluene/m-xylene/mesitylene, halobenzenes, benzenediol and nitrophenol isomers. Especially, the separation of halobenzenes appeared to be controlled by both the size of the halogen substituents and the strength of the noncovalent bonding interactions, which was further confirmed by molecular dynamics simulation. The satisfactory separation and repeatability revealed the promising prospects of amine-pillar[5]arene-based stationary phase for RPLC.

Supramolecular Assembly Frameworks (SAFs): Shaping the Future of Functional Materials

Supramolecular assembly frameworks (SAFs) represent a new category of porous materials, utilizing non-covalent interactions, setting them apart from metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). This category includes but is not restricted to hydrogen-bonded organic frameworks and supramolecular organic frameworks. SAFs stand out for their outstanding porosity, crystallinity, and stability, alongside unique dissolution-recrystallization dynamics that enable significant structural and functional modifications. Crucially, their non-covalent assembly strategies allow for a balanced manipulation of porosity, symmetry, crystallinity, and dimensions, facilitating the creation of advanced crystalline porous materials unattainable through conventional covalent or coordination bond synthesis. Despite their considerable promise in overcoming several limitations inherent to MOFs and COFs, particularly in terms of solution-processability, SAFs have received relatively little attention in recent literature. This Minireview aims to shed light on standout SAFs, exploring their design principles, synthesis strategies, and characterization methods. It emphasizes their distinctive features and the broad spectrum of potential applications across various domains, aiming to catalyze further development and practical application within the scientific community.

Construction of dual-chiral covalent organic frameworks for enantioselective separation

Developing novel chiral stationary phases (CSPs) with versatility is of great importance in enantiomer separation. This study fabricated a dual-chiral covalent organic framework (PA-CA COF) via successive post-synthetic modifications. The chiral trans-1,2-cyclohexanediamine (CA) and (D)-penicillamine (PA) groups were periodically aligned within nanochannels of the COF, allowing selective recognition of enantiomers through intermolecular interactions. It can be a versatile high-performance liquid chromatography (HPLC) CSP for separating a wide range of enantiomers, including chiral pharmaceutical intermediates and chiral drugs. With separation performance comparable to commercial chiral columns and even greater versatility, the PA-CA COF@SiO2 column held promise for practical applications. Chiral separation results combined with molecular simulation indicated that the mixed mode of PA and CA resulted in the broad separation capability of PA-CA COF. The introduction of the dual-chiral COFs concept opens up a new avenue for chiral recognition and separation, holding great potential for practical enantiomer separation.

Recent progress for chiral stationary phases based on chiral porous materials in high-performance liquid chromatography and gas chromatography separation

Chirality is a fundamental property of nature. Separation and analysis of racemates are of great importance in the fields of medicine and the production of chiral biopharmaceutical intermediates. Chiral chromatography has the characteristics of a wide separation range, fast separation speed, and high efficiency. The development and preparation of novel chiral stationary phases with good chiral recognition and separation capacity is the core and key of chiral chromatographic separation and analysis. In this work, the representative research progress of novel chiral porous crystal materials including chiral covalent organic frameworks, chiral porous organic cages, chiral metal-organic frameworks, and chiral metal-organic cages used as chiral stationary phases of capillary gas chromatography and high-performance liquid chromatography over the last 4 years is reviewed in detail. The chiral recognition and separation properties of the representative studies in this review are also introduced and discussed.

Unconventional approaches for chiral resolution

Chirality is a fundamental and ubiquitous property of nature involved in multiple fields of science. In particular, the possible resolution of the enantiomeric forms of a molecule is crucial in the pharmaceutical, food, and agrochemical industries. The search for efficient, broad-spectrum, and yet simple methods for obtaining enantiomerically pure substances is a current challenge. Enantioselective resolution methods rely on an asymmetric environment that allows the two antipodes of a chiral molecule to be distinguished. In addition to enantiomeric separation techniques, such as chromatography and electrophoresis, new promising approaches involving out-of-the-scheme synergistic effects between chiral selectors (CS) and external stimuli are emerging. This Trends article discusses different enantioselective mechanisms triggered by unconventional physicochemical stimuli for the design of avant-garde approaches that could offer novel perspectives in the field of chiral resolution.

Stranski-Krastanov Growth of Two-Dimensional Covalent Organic Framework Films

Insights into the formation mechanisms of two-dimensional covalent organic frameworks (2D COFs) at both the in-plane and interlayer levels are essential for improving material quality and synthetic methodology. Here, we report the controllable preparation of 2D COF films via on-surface synthesis and investigate the growth mechanism using atomic force microscopy. Monolayer, bilayer, and layer-plus-island multilayer COF films were successfully constructed on hexagonal boron nitride in a controlled manner. The porphyrin-based COF films grow in the Stranski-Krastanov mode, i.e., a uniform bilayer COF film can be formed through layer-by-layer growth in the initial stage followed by island growth starting from the third layer. Furthermore, fluorescence quenching caused by π-π stacking interactions between 2D COF neighboring layers was revealed. These results provide new perspectives on the synthesis of high-quality 2D COF films with controllable thickness and morphology, paving the way for a diverse range of applications.

Bimodal Oxidation Electrochemiluminescence Mechanism of Coreactant-Embedded Covalent Organic Frameworks via Postsynthetic Modification

Electrochemiluminescence (ECL) efficiency is determined by charge transfer between coreactants and emitters in coreactant systems, which are usually limited by their slow intermolecular charge transfer. In this study, a covalent organic framework (COF) with aldehyde residue was synthesized, and then coreactants were covalently integrated into the skeleton through the postsynthetic modification strategy, resulting in a crystalline coreactant-embedded COF nanoemitter (C-COF). Compared to the pristine COF with an equivalent external coreactant, C-COF exhibited an extraordinary 1008-fold enhancement of ECL intensity due to the rapid intrareticular charge transfer. Significantly, with the pH increase, C-COF shows protonation-induced ECL enhancement for the first ECL peaked at +1.1 V and an opposite trend for the second ECL at +1.4 V, which were attributed to the antedating oxidation of coreactant in framework and COF self-oxidation, respectively. The resulting bimodal oxidation ECL mechanism was rationalized by spectral characterization and density functional theory calculations. The postsynthetic coreactant-embedded nanoemitters present innovative and universal avenues for advancing ECL systems.

A minireview on covalent organic frameworks as stationary phases in chromatography

Advances in the design of novel porous materials open new avenues for the development of chromatographic solid stationary phases. Covalent organic frameworks (COFs) are promising candidates in this context due to their remarkable structural versatility and exceptional chemical and textural properties. In this minireview, we summarize the main strategies followed in recent years to apply these materials as stationary phases for chromatographic separations. We also comment on the perspectives of this new research field and potential directions to expand the applicability and implementation of COF stationary phases in analytical systems.

Wireless Hollow Miniaturized Objects for Electroassisted Chiral Resolution

Chiral resolution plays a crucial role in the field of drug development, especially for a better understanding of biochemical processes. In such a context, classic separation methods have been used for decades due to their versatility and easy scale-up. Among the many attempts proposed for enantioselective separation, electroassisted methods are presented as an interesting alternative. Herein, we present the use of wirelessly activated hollow tubular systems for the effective, simple, and tunable separation of racemic and enantioenriched mixtures. These double-layered tubular objects consist of an external polypyrrole chassis, a polymer with good electromechanical properties, functionalized in its inner part with an inherently chiral oligomer. The synergy between the electromechanical pumping process of the outer layer and the enantioselective affinity of the inner part induces the system to behave as a miniaturized chiral column. These hybrid objects are able to separate racemic and enantioenriched solutions of chiral model analytes into the corresponding enantiomers in high enantiomeric purity. Finally, these electromechanical systems can resolve mixtures formed by chiral probes with completely uncorrelated molecular structures injected simultaneously into the single antipodes.

Chiral Memory in Dynamic Transformation from Porous Organic Cages to Covalent Organic Frameworks for Enantiorecognition Analysis

The preservation of chirality during a transformation process, known as the "chiral memory" effect, has garnered significant attention across multiple research disciplines. Here, we first report the retention of the original chiral structure during dynamic covalent chemistry (DCC)-induced structural transformation from porous organic cages into covalent organic frameworks (COFs). A total of six two-dimensional chiral COFs constructed by entirely achiral building blocks were obtained through the DCC-induced substitution of chiral linkers in a homochiral cage (CC3-R or -S) using achiral amine monomers. Homochirality of these COFs resulted from the construction of 3-fold-symmetric benzene-1,3,5-methanimine cores with a propeller-like configuration of one single-handedness throughout the cage-to-COF transformation. The obtained chiral COFs can be further utilized as fluorescence sensors or chiral stationary phases for gas chromatography with high enantioselectivity. The present study thus highlighted the great potential to expand the scope of functional chiral materials via DCC-induced crystal-to-crystal transformation with the chiral memory effect.

Assembly of Homochiral Aluminum Oxo Clusters for Circularly Polarized Luminescence

Chiral aluminum oxo clusters (cAlOCs) are distinguished from other classes of materials on account of their abundance in the earth's crust and their potential for sustainable development. However, the practical synthesis of cAlOCs is rarely known. Herein, we adopt a synergistic coordination strategy by using chiral amino acid ligands as bridges and auxiliary pyridine-2,6-dicarboxylic acid as chelating ligands and successfully isolate an extensive family of cAlOCs. They integrate molecular chirality, absolute helicity, and intrinsic hydrogen-bonded chiral topology. Moreover, they have the structural characteristics of one-dimensional channels and replaceable counteranions, which make them well combined with fluorescent dyes for circularly polarized luminescence (CPL). The absolute luminescence dissymmetry factor (glum) of up to the 10-3 order is comparable to several noble metals, revealing the enormous potential of cAlOCs in low-cost chiral materials. We hope this work will inspire new discoveries in the field of chirality and provide new opportunities for constructing low-cost chiral materials.

Covalent Organic Frameworks with Tunable Chirality for Chiral-Induced Spin Selectivity

Chiral covalent organic frameworks (CCOFs) have attracted extensive interest for their potential applications in various enantioselective processes. However, the exploitation of chirality-induced spin selectivity (CISS) that enables a new technology for the injection of spin polarized current without the need for a permanent magnetic layer within CCOFs remains a largely untapped area of research. Here, we demonstrate that, for the first time, COFs can be an attractive platform to develop spin filter materials with efficient CISS. This facilitates the design and synthesis of a new family of Zn(salen)-based 2D CCOFs, namely, CCOFs-9-12, by imine condensation of chiral 1,2-diaminocyclohexane and tri- or tetra(salicylaldehyde) derivatives. CCOF-9, distinguished by its unique C2 symmetric "armchair" tetrasubstituted pyrene conformation, exhibits the most pronounced chirality among these materials and serves as a solid-state host, enabling the enantioselective adsorption of racemic drugs with an enantiomeric excess (ee) of up to 97%. After substituting diamagnetic zinc(II) ions for paramagnetic cobalt(II), the resulting CCOF-9-Co not only retains its high crystallinity, porosity, and exceptional chirality but also exhibits enhanced conductivity, a crucial factor for the effective observation of CISS. Magnetic conductive atomic force microscopy showed that CCOF-9-Co exhibited a remarkable CISS effect with up to an 88-94% spin polarization ratio. This phenomenon is further confirmed by the increased intensity in the magnetic circular dichroism (MCD) when CCOF-9-Co is under an external magnetic field. This work therefore shows the tremendous potential of CCOFs for controlling spin selectivity and will stimulate the creation of new types of crystalline polymers with strong CISS effects for spin filters.

Mixed-Linker Chiral 2D Covalent Organic Frameworks with Controlled Layer Stacking for Electrochemical Asymmetric Catalysis

Covalent organic frameworks (COFs) have undergone extensive research as heterogeneous catalysts for a wide range of significant reactions, but they have not yet been investigated in the realm of electrochemical asymmetric catalysis, despite their recognition as an economical and sustainable strategy for producing enantiopure compounds. Here, we report a mixed-linker strategy to design multicomponent two-dimensional (2D) chiral COFs with tunable layer stacking for highly enantioselective electrocatalysis. By crystallizing mixtures of triamines with and without the MacMillan imidazolidinone catalyst or aryl substituent (ethyl and isopropyl) and a dialdehyde derivative of thieno-[3,2-b]thiophene, we synthesized and structurally characterized a series of three-component homochiral 2D COFs featuring either AA or ABC stacking. The stacking modes that can be synthetically controlled through steric tuning using different aryl substituents affect their chemical stability and electrochemical performance. With the MacMillan catalyst periodically appended on their channels, all three COFs with conductive thiophene moieties can be highly enantioselective and recyclable electrocatalysts for the asymmetric α-arylation of aldehydes, affording alkylated anilines with up to 97% enantiomeric excess by an anodic oxidation/organocatalytic protocol. Presumably due to their higher charge transfer ability, the ABC stacking COFs exhibit improved reactivity compared to the AA stacking analogue. This work therefore advances COFs as electrocatalysts for asymmetric catalysis and may facilitate the design of more redox-active crystalline organic polymers for electrochemical enantioselective processes.