Hydride in BaTiO2.5H0.5: A Labile Ligand in Solid State Chemistry

A new family of anti-perovskite oxyhydrides with tetrahedral GaO4 polyanions

New solid compounds A3-xGaO4H1-y (A = Sr, Ba; x ∼0.15, y ∼0.3), which are the first oxyhydrides containing gallium ions, have been synthesized by high-pressure synthesis. Powder X-ray and neutron diffraction experiments revealed that the series adopts an anti-perovskite structure consisting of hydride-anion-centered HA6 octahedra with tetrahedral GaO4 polyanions, wherein the A- and H-sites show partial defect. Formation energy calculations from the raw materials support that stoichiometric Ba3GaO4H is thermodynamically stable with a wide band gap. Annealing the A = Ba powder under flowing Ar and O2 gas suggests topochemical H- desorption and O2-/H- exchange reactions, respectively.

Unlimiting ionic conduction: manipulating hydration dynamics through vibrational strong coupling of water

The energy states of molecules and the vacuum electromagnetic field can be hybridized to form a strong coupling state. In particular, it has been demonstrated that vibrational strong coupling can be used to modify the chemical dynamics of molecules. Here, we propose that ion dynamics can be altered through modifications of the dynamic hydration structure in a cavity vacuum field. We investigated the effect of different electrolyte species on ionic conductivity. Infrared spectroscopy of aqueous electrolyte solutions within the cavity confirmed the formation of vibrational ultrastrong coupling of water molecules, even in the presence of electrolytes. Interestingly, we observed significant enhancements in ionic conductivity, for specific alkali cations, particularly those classified as structure-breaking cations. These enhancements cannot be explained within the current theoretical framework for liquid electrolytes. Our analysis suggests that the vibrational strong coupling modifies the local dielectric friction experienced by hydrated ions. In addition, we propose the enthalpic and entropic modification of ionic conductivity through the systematic investigation of the hydration properties of different electrolytes. This study unveils the potential role of polaritons for exploring uncharted spaces in the design of materials with enhanced ionic conduction. Harnessing the unique properties of strong coupling and its influence on hydration dynamics could lead to the development of novel electrolytes and advancements in the field of ionic conduction.

Anion redox as a means to derive layered manganese oxychalcogenides with exotic intergrowth structures

Topochemistry enables step-by-step conversions of solid-state materials often leading to metastable structures that retain initial structural motifs. Recent advances in this field revealed many examples where relatively bulky anionic constituents were actively involved in redox reactions during (de)intercalation processes. Such reactions are often accompanied by anion-anion bond formation, which heralds possibilities to design novel structure types disparate from known precursors, in a controlled manner. Here we present the multistep conversion of layered oxychalcogenides Sr₂MnO₂Cu_1.5Ch₂ (Ch = S, Se) into Cu-deintercalated phases where antifluorite type [Cu_1.5Ch₂]^2.5- slabs collapsed into two-dimensional arrays of chalcogen dimers. The collapse of the chalcogenide layers on deintercalation led to various stacking types of Sr₂MnO₂Ch₂ slabs, which formed polychalcogenide structures unattainable by conventional high-temperature syntheses. Anion-redox topochemistry is demonstrated to be of interest not only for electrochemical applications but also as a means to design complex layered architectures.

Computation-accelerated discovery of the K2NiF4-type oxyhydrides combing density functional theory and machine learning approach

The emerging K₂NiF₄-type oxyhydrides with unique hydride ions (H⁻) and O^2- coexisting in the anion sublattice offer superior functionalities for numerous applications. However, the exploration and innovations of the oxyhydrides are challenged by their rarity as a limited number of compounds reported in experiments, owing to the stringent laboratory conditions. Herein, we employed a suite of computations involving ab initio methods, informatics and machine learning to investigate the stability relationship of the K₂NiF₄-type oxyhydrides. The comprehensive stability map of the oxyhydrides chemical space was constructed to identify 76 new compounds with good thermodynamic stabilities using the high-throughput computations. Based on the established database, we reveal geometric constraints and electronegativities of cationic elements as significant factors governing the oxyhydrides stabilities via informatics tools. Besides fixed stoichiometry compounds, mixed-cation oxyhydrides can provide promising properties due to the enhancement of compositional tunability. However, the exploration of the mixed compounds is hindered by their huge quantity and the rarity of stable oxyhydrides. Therefore, we propose a two-step machine learning workflow consisting of a simple transfer learning to discover 114 formable oxyhydrides from thousands of unknown mixed compositions. The predicted high H⁻ conductivities of the representative oxyhydrides indicate their suitability as energy conversion materials. Our study provides an insight into the oxyhydrides chemistry which is applicable to other mixed-anion systems, and demonstrates an efficient computational paradigm for other materials design applications, which are challenged by the unavailable and highly unbalanced materials database.

High-Pressure Synthesis of Transition-Metal Oxyhydrides with Double-Perovskite Structures

We report on the high-pressure synthesis, crystal structure, and magnetic properties of four novel transition-metal oxyhydrides─Ba₂NaVO₃H₃, Ba₂NaVO_2.4H_3.6, Ba₂NaCrO_2.2H_3.8, and Ba₂NaTiO₃H₃─crystallizing in the double-perovskite structure. Notably, they have a higher hydride content in their anion sites (50%-63%) than known oxyhydrides with perovskite structures do (≤33%). Vanadium and chromium oxyhydrides exhibited Curie-Weiss magnetic susceptibilities with no magnetic ordering down to 2 K, which may be due to geometrical frustration in their face-centered lattices and weak magnetic interactions. Density functional theory calculations revealed that the transition metal-hydride bonding nature of the prepared oxyhydrides is more covalent than that observed for known perovskite oxyhydrides, as evidenced by the shorter bond lengths of the former. Remarkably, our double-perovskite oxyhydrides with a high hydride content may possess a bonding character intermediate between those of known oxyhydrides and hydrides.

From SmOF to SmH0.78OF0.22: H/F Substitution in Oxide Fluorides as a Synthesis Route to Heteroanionic Compounds

Mixed anionic hydrides of the rare earths are a fascinating class of compounds as potential functional materials, especially in luminescence, as photochromic thin films and for ion conduction. For exploratory studies, the effectiveness of various synthesis methods must be investigated, which is done here for metathesis reactions. The reaction of Sm₂O₃ with PTFE yields SmOF (P2₁/c, a = 5.60133(19) Å, b = 5.65567(19) Å, c = 5.6282(2) Å, β = 90.169(5)°, V = 178.295(11) ų, and Z = 4) in a new, probably metastable, polymorph of the baddeleyite-type structure. Metathesis reactions of SmOF with LiH, NaH, or CaH₂ led to a samarium hydride oxide fluoride, SmH_xOF_1-x; i.e., incomplete H/F exchange occurs. X-ray diffraction and neutron diffraction on a compound with x = 0.78 obtained via NaH reveal hydride, oxide, and fluoride ions to be partially ordered. SmH_0.78OF_0.22 (Ia3̅, a = 10.947(2) Å, V = 1311.7(4) ų, Z = 32) crystallizes in an anti-Li₃AlN₂-type structure with distorted cubic anion coordination for samarium atoms (site symmetry 3̅ and 2) and distorted tetrahedral arrangement of samarium atoms around the anions (site symmetry 1 and 3). It is a fully structurally characterized hydride oxide fluoride and shows a rare crystal chemical feature─the occupation of a crystallographic site by three different anions (0.188 H + 0.667 O + 0.145 F). Interatomic distances between samarium and hydrogen and samarium and the mixed hydrogen/oxygen/fluorine site range from 2.45 to 2.48 Å and 2.29 to 2.42 Å, respectively, and are similar to those in samarium hydride, samarium oxide, and samarium fluoride. Fluoride extraction by reaction with alkali and alkaline earth hydrides has thus proven to be a useful synthesis route to hydride oxides and also hydride oxide halogenides, which might be further exploited in exploratory research on heteroanionic metal hydrides.

High-Conductive Protonated Layered Oxides from H2 O Vapor-Annealed Brownmillerites

Protonated 3d transition-metal oxides often display low electronic conduction, which hampers their application in electric, magnetic, thermoelectric, and catalytic fields. Electronic conduction can be enhanced by co-inserting oxygen acceptors simultaneously. However, the currently used redox approaches hinder protons and oxygen ions co-insertion due to the selective switching issues. Here, a thermal hydration strategy for systematically exploring the synthesis of conductive protonated oxides from 3d transition-metal oxides is introduced. This strategy is illustrated by synthesizing a novel layered-oxide SrCoO₃ H from the brownmillerite SrCoO_2.5 . Compared to the insulating SrCoO_2.5 , SrCoO₃ H exhibits an unprecedented high electronic conductivity above room temperature, water uptake at 250 °C, and a thermoelectric power factor of up to 1.2 mW K^-2 m^-1 at 300 K. These findings open up opportunities for creating high-conductive protonated layered oxides by protons and oxygen ions co-doping.

Barium Titanium Oxynitride from Ammonia-Free Nitridation of Reduced BaTiO3

We investigated the nitridation of reduced BaTiO3, BaTiO2.60H0.08, corresponding to an oxyhydride with a large concentration of O defects (>10%). The material is readily nitrided under flowing N2 gas at temperatures between 400 and 450 °C to yield oxynitrides BaTiO2.6Nx (x = 0.2−0.22) with a slightly tetragonally distorted perovskite structure, a ≈ 4.01 and c ≈ 4.02 Å, and Ti partially remaining in the oxidation state III. The tetragonal structure was confirmed from Raman spectroscopy. 14N MAS NMR spectroscopy shows a single resonance at 270 ppm, which is typical for perovskite transition metal oxynitrides. However, largely different signal intensity for materials with very similar N content suggests N/O/vacancy ordering when prolonging nitridation times to hours. Diffuse reflectance UV-VIS spectroscopy shows a reduction of the intrinsic band gap to 2.4–2.45 eV compared to BaTiO3 (~3.2 eV). Mott-Schottky measurements confirm n-type conductivity and reveal a slight negative shift of the conduction band edge from –0.59 V (BaTiO3) to ~–0.65 eV.

Formation of PbCl2-type AHF (A = Ca, Sr, Ba) with partial anion order at high pressure

The high-pressure structures of alkaline earth metal hydride-fluorides (AHFs) (A = Ca, Sr, Ba) were investigated up to 8 GPa. While AHF adopts the fluorite-type structure (Fm3[combining macron]m) at ambient pressure without anion ordering, the PbCl2-type (cotunnite-type) structure (Pnma) is formed by pressurization, with a declining trend of critical pressure as the ionic radius of the A2+ cation increases. In contrast to PbCl2-type LaHO and LaOF whose anions are fully ordered, the H-/F- anions in the high-pressure polymorph of SrHF and BaHF are partially ordered, with a preferential occupation of H- at the square-pyramidal site (vs. tetrahedral site). First-principles calculations partially support the preferential anion occupation and suggest occupation switching at higher pressure. These results provide a strategy for controlling the anion ordering and local structure in mixed-anion compounds.

Anion ordering enables fast H- conduction at low temperatures

The introduction of chemical disorder by substitutional chemistry into ionic conductors is the most commonly used strategy to stabilize high-symmetric phases while maintaining ionic conductivity at lower temperatures. In recent years, hydride materials have received much attention owing to their potential for new energy applications, but there remains room for development in ionic conductivity below 300°C. Here, we show that layered anion-ordered Ba_2-δH_3-2δ X (X = Cl, Br, and I) exhibit a remarkable conductivity, reaching 1 mS cm^-1 at 200°C, with low activation barriers allowing H^- conduction even at room temperature. In contrast to structurally related BaH₂ (i.e., Ba₂H₄), the layered anion order in Ba_2-δH_3-2δ X, along with Schottky defects, likely suppresses a structural transition, rather than the traditional chemical disorder, while retaining a highly symmetric hexagonal lattice. This discovery could open a new direction in electrochemical use of hydrogen in synthetic processes and energy devices.

Hydride-based antiperovskites with soft anionic sublattices as fast alkali ionic conductors

Most solid-state materials are composed of p-block anions, only in recent years the introduction of hydride anions (1s²) in oxides (e.g., SrVO₂H, BaTi(O,H)₃) has allowed the discovery of various interesting properties. Here we exploit the large polarizability of hydride anions (H^-) together with chalcogenide (Ch^2-) anions to construct a family of antiperovskites with soft anionic sublattices. The M₃HCh antiperovskites (M = Li, Na) adopt the ideal cubic structure except orthorhombic Na₃HS, despite the large variation in sizes of M and Ch. This unconventional robustness of cubic phase mainly originates from the large size-flexibility of the H^- anion. Theoretical and experimental studies reveal low migration barriers for Li⁺/Na⁺ transport and high ionic conductivity, possibly promoted by a soft phonon mode associated with the rotational motion of HM₆ octahedra in their cubic forms. Aliovalent substitution to create vacancies has further enhanced ionic conductivities of this series of antiperovskites, resulting in Na_2.9H(Se_0.9I_0.1) achieving a high conductivity of ~1 × 10^-4 S/cm (100 °C).

Trapping of different stages of BaTiO3 reduction with LiH

We investigated the hydride reduction of tetragonal BaTiO₃ using LiH. The reactions employed molar H : BaTiO₃ ratios of 1.2, 3, and 10 and variable temperatures up to 700 °C. The air-stable reduced products were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy, thermogravimetric analysis (TGA), X-ray fluorescence (XRF), and ¹H magic-angle spinning (MAS) NMR spectroscopy. Effective reduction, as indicated by the formation of dark blue to black colored, cubic-phased, products was observed at temperatures as low as 300 °C. The product obtained at 300 °C corresponded to oxyhydride BaTiO_∼2.9H_∼0.1, whereas reduction at higher temperatures resulted in simultaneous O defect formation, BaTiO_2.9-x H_0.1□ _x , and eventually - at temperatures above 450 °C - to samples void of hydridic H. Concomitantly, the particles of samples reduced at high temperatures (500-600 °C) display substantial surface alteration, which is interpreted as the formation of a TiO _x (OH) _y shell, and sintering. Diffuse reflectance UV-VIS spectroscopy shows broad absorption in the VIS-NIR region, which is indicative of the presence of n-type free charge carriers. The size of the intrinsic band gap (∼3.2 eV) appears only slightly altered. Mott-Schottky measurements confirm the n-type conductivity and reveal shifts of the conduction band edge in the LiH reduced samples. Thus LiH appears as a versatile reagent to produce various distinct forms of reduced BaTiO₃ with tailored electronic properties.

On Prediction of a Novel Chiral Material Y2H3O(OH): A Hydroxyhydride Holding Hydridic and Protonic Hydrogens

Examination of possible pathways of how oxygen atoms can be added to a yttrium oxyhydride system allowed us to predict new derivatives such as hydroxyhydrides possessing the composition M₂H₃O(OH) (M = Y, Sc, La, and Gd) in which three different anions (H^-, O²-, and OH^-) share the common chemical space. The crystal data of the solid hydroxyhydrides obtained on the base of DFT modeling correspond to the tetragonal structure that is characterized by the chiral space group P 4 1 . The analysis of bonding situation in M₂H₃O(OH) showed that the microscopic mechanism governing chemical transformations is caused by the displacements of protons which are induced by interaction with oxygen atoms incorporated into the crystal lattice of the bulk oxyhydride. The oxygen-mediated transformation causes a change in the charge state of some adjacent hydridic sites, thus forming protonic sites associated with hydroxyl groups. The predicted materials demonstrate a specific charge ordering that is associated with the chiral structural organization of the metal cations and the anions because their lattice positions form helical curves spreading along the tetragonal axis. Moreover, the effect of spatial twisting of the H^- and H⁺ sites provides additional linking via strong dihydrogen bonds. The structure-property relationships have been investigated in terms of structural, mechanical, electron, and optical features. It was shown that good polar properties of the materials make them possible prototypes for the design of nonlinear optical systems.

Topochemical Fluorination of n = 2 Ruddlesden-Popper Type Sr3Ti2O7 to Sr3Ti2O5F4 and Its Reductive Defluorination

Within this study, we show that a sequence of substitutive topochemical fluorination of the n = 2 Ruddlesden-Popper type compounds Sr₃Ti₂O₇ to Sr₃Ti₂O₅F₄ followed by reductive topochemical defluorination reactions between the oxyfluoride and the reducing agent sodium hydride allows for a substantial reduction of the oxidation state of Ti due to selective extraction and hydride substitution of fluoride ions. The oxyfluoride Sr₃Ti₂O₅F₄ has been synthesized and characterized structurally for the first time. The defluorination experiments have been conducted at temperatures as low as 300 °C, enabling also the reduction of this metastable compound. The evolution of phase fractions and unit cell volumes of various reduced phases as well as of side products has been monitored by an X-ray diffraction study as a function of the amount of sodium hydride used. Strong structural changes within the reduced phases, involving considerable decreases in the c lattice parameters partly accompanied by symmetry, lowering have been observed. To gain a deeper understanding of the structural changes, selected reduction reaction products have been further investigated by coupled analysis of X-ray and neutron powder diffraction data. Moreover, changes in the oxidation state of Ti have been studied using magnetic measurements and X-ray photoelectron spectroscopy examining differences between the bulk and the surface properties. Additionally, similarities and differences between previously published results on the topochemical defluorination of the n = 1 Ruddlesden-Popper type compound Sr₂TiO₃F₂ are discussed.

Hydride Reduction of BaTiO3 - Oxyhydride Versus O Vacancy Formation

We investigated the hydride reduction of tetragonal BaTiO₃ using the metal hydrides CaH₂, NaH, MgH₂, NaBH₄, and NaAlH₄. The reactions employed molar BaTiO₃/H ratios of up to 1.8 and temperatures near 600 °C. The air-stable reduced products were characterized by powder X-ray diffraction (PXRD), transmission electron microscopy, thermogravimetric analysis (TGA), and ¹H magic angle spinning (MAS) NMR spectroscopy. PXRD showed the formation of cubic products-indicative of the formation of BaTiO_3-x H _x -except for NaH. Lattice parameters were in a range between 4.005 Å (for NaBH₄-reduced samples) and 4.033 Å (for MgH₂-reduced samples). With increasing H/BaTiO₃ ratio, CaH₂-, NaAlH₄-, and MgH₂-reduced samples were afforded as two-phase mixtures. TGA in air flow showed significant weight increases of up to 3.5% for reduced BaTiO₃, suggesting that metal hydride reduction yielded oxyhydrides BaTiO_3-x H _x with x values larger than 0.5. ¹H MAS NMR spectroscopy, however, revealed rather low concentrations of H and thus a simultaneous presence of O vacancies in reduced BaTiO₃. It has to be concluded that hydride reduction of BaTiO₃ yields complex disordered materials BaTiO_3-x H _y □_(x-y) with x up to 0.6 and y in a range 0.04-0.25, rather than homogeneous solid solutions BaTiO_3-x H _x . Resonances of (hydridic) H substituting O in the cubic perovskite structure appear in the -2 to -60 ppm spectral region. The large range of negative chemical shifts and breadth of the signals signifies metallic conductivity and structural disorder in BaTiO_3-x H _y □_(x-y). Sintering of BaTiO_3-x H _y □_(x-y) in a gaseous H₂ atmosphere resulted in more ordered materials, as indicated by considerably sharper ¹H resonances.

Expanding frontiers in materials chemistry and physics with multiple anions

During the last century, inorganic oxide compounds laid foundations for materials synthesis, characterization, and technology translation by adding new functions into devices previously dominated by main-group element semiconductor compounds. Today, compounds with multiple anions beyond the single-oxide ion, such as oxyhalides and oxyhydrides, offer a new materials platform from which superior functionality may arise. Here we review the recent progress, status, and future prospects and challenges facing the development and deployment of mixed-anion compounds, focusing mainly on oxide-derived materials. We devote attention to the crucial roles that multiple anions play during synthesis, characterization, and in the physical properties of these materials. We discuss the opportunities enabled by recent advances in synthetic approaches for design of both local and overall structure, state-of-the-art characterization techniques to distinguish unique structural and chemical states, and chemical/physical properties emerging from the synergy of multiple anions for catalysis, energy conversion, and electronic materials.

Titanium-Based Hydrides as Heterogeneous Catalysts for Ammonia Synthesis

The problem of activating N₂ and its subsequent hydrogenation to form NH₃ has been approached from many directions. One of these approaches involves the use of transition metal hydride complexes. Recently, transition metal hydride complexes of Ti and Ta have been shown to activate N₂, but without catalytic formation of NH₃. Here, we show that at elevated temperatures (400 °C, 5 MPa), solid-state hydride-containing Ti compounds (TiH₂ and BaTiO_2.5H_0.5) form a nitride-hydride surface similar to those observed with titanium clusters, but continuously (∼7 days) form NH₃ under H₂/N₂ flow conditions to achieve a catalytic cycle, with activity (up to 2.8 mmol·g·^-1·h^-1) almost comparable to conventional supported Ru catalysts such as Cs-Ru/MgO or Ru/BaTiO₃ that we have tested. As with the homogeneous analogues, the initial presence of hydride within the catalyst is critical. A rare hydrogen-based Mars van Krevelen mechanism may be at play here. Conventional scaling rules of pure metals predict essentially no activity for Ti, making this a previously overlooked element, but our results show that by introducing hydride, the repertoire of heterogeneous catalysts can be expanded to include formerly unexamined compositions without resorting to precious metals.

The role of π-blocking hydride ligands in a pressure-induced insulator-to-metal phase transition in SrVO2H

Transition-metal oxyhydrides are of considerable current interest due to the unique features of the hydride anion, most notably the absence of valence p orbitals. This feature distinguishes hydrides from all other anions, and gives rise to unprecedented properties in this new class of materials. Here we show via a high-pressure study of anion-ordered strontium vanadium oxyhydride SrVO₂H that H⁻ is extraordinarily compressible, and that pressure drives a transition from a Mott insulator to a metal at ~ 50 GPa. Density functional theory suggests that the band gap in the insulating state is reduced by pressure as a result of increased dispersion in the ab-plane due to enhanced V_dπ-O_pπ-V_dπ overlap. Remarkably, dispersion along c is limited by the orthogonal V_dπ-H_1s-V_dπ arrangement despite the greater c-axis compressibility, suggesting that the hydride anions act as π-blockers. The wider family of oxyhydrides may therefore give access to dimensionally reduced structures with novel electronic properties.

Incorporating hydride anions into transition metal oxides can dramatically affect their structural and electronic properties. Here the authors reveal a pressure-induced insulator-to-metal transition in SrVO₂H and show that the compressibility of hydride anions without π-symmetry valence orbitals causes them to act as π-blockers.

Pressure-Stabilized Cubic Perovskite Oxyhydride BaScO2H

We report a scandium oxyhydride BaScO₂H prepared by solid state reaction under high pressure. Rietveld refinements against powder synchrotron X-ray and neutron diffraction data revealed that BaScO₂H adopts the ideal cubic perovskite structure (Pm3̅m), where oxide (O^2-) and hydride (H^-) anions are disordered. ¹H nuclear magnetic resonance (NMR) spectroscopy provides a positive chemical shift of about +4.4 ppm, which can be understood by the distance to the nearest (and possibly the next nearest) cation from the H nucleus. A further analysis of the NMR data and calculations based on ab initio random structure searches suggest a partial cis preference in ScO₄H₂ octahedra. The present oxyhydride, if compositionally or structurally tuned, may become a candidate for H^- conductors.

New chemistry of transition metal oxyhydrides

In this review we describe recent advances in transition metal oxyhydride chemistry obtained by topochemical routes, such as low temperature reduction with metal hydrides, or high-pressure solid-state reactions. Besides the crystal chemistry, magnetic and transport properties of the bulk powder and epitaxial thin film samples, the remarkable lability of the hydride anion is particularly highlighted as a new strategy to discover unprecedented mixed anion materials.