Enhanced Triplet–Triplet Energy Transfer and Upconversion Fluorescence through Host–Guest Complexation

Shell Thickness and Heterogeneity Dependence of Triplet Energy Transfer between Core-Shell Quantum Dots and Adsorbed Molecules

Quantum dot (QD)-sensitized triplet energy transfer (TET) has found promising applications in photon upconversion and photocatalysis. However, the underlying mechanism of TET in the QD-acceptor complex remains unclear despite the well-developed TET theory for the molecular donor-acceptor systems. Herein, the coupling strength of TET from CdSe/CdS core-shell QDs to 9-anthracene carboxylic acid (ACA) was studied by measuring the TET rate as a function of shell thickness with time-resolved photoluminescence. The change of TET-coupling strength with increasing shell thickness was further compared to those of electron and hole transfers from QDs so that we could test whether QD-sensitized TET is mediated by the charge transfer virtual state and can be considered as simultaneous electron and hole transfers as in molecular donor-acceptor systems. The measured coupling strength of TET from the CdSe/CdS QD decreases exponentially with the CdS shell thickness r: |V|(r) = |V|(0)e-βr, with an exponential decay factor β of 0.19 Å-1, which is smaller than the sum of the measured decay factors for electron transfer to methyl viologen (0.18 Å-1) and hole transfer to phenothiazine (0.29 Å-1) from the same QD. This inconsistency is explained by the broadening of QD shell thicknesses in the distance dependence study, which significantly modifies the TET-coupling strength and driving force, resulting in a shallower distance dependence of the TET rate constants. This study sheds light on the fundamental mechanisms of QD-sensitized TET reactions.

Optimizing TTA-UC performance by chemically tuning sensitizers and orderly organizing sensitizers and annihilators

Triplet-triplet annihilation upconversion (TTA-UC), which can efficiently convert low-energy light into high-energy light, has received extensive attention in cutting-edge fields such as photovoltaics, bioimaging, and photopolymerization. Currently, optimizing the performance of upconversion materials is a key issue in expanding the application scope of TTA-UC and an important driving force for promoting the progress of this field. This review summarizes recent advancements in enhancing TTA-UC performance through two primary strategies: (1) molecular design: chemical modification of sensitizers to optimize their photophysical properties. By optimizing their molecular structures, the energy difference between the singlet and triplet states of molecules was precisely adjusted, thus the energy losses in intersystem crossing (ISC) and triplet-triplet energy transfer (TTET) processes were effectively reduced, and the anti-Stokes shift was significantly expanded; (2) molecular organization: implementing strategies to control the spatial arrangement of sensitizers and annihilators at the molecular level. This includes the utilization of supramolecular host-guest systems. For example, by taking advantage of the special cavities of host molecules such as cyclodextrins and pillararenes, sensitizers or annihilators can be accurately encapsulated. Through supramolecular host-guest interactions, the intermolecular distance is reduced, thereby facilitating energy transfer between the sensitizers and annihilators. In addition, through co-crystallization, forming frameworks, introducing multiple hydrogen bonds, or leveraging organic/inorganic hybrid materials, the long-range ordered arrangement of annihilators has been realized, opening up new avenues for improving the efficiency of TTA-UC. Furthermore, this review also explores the existing challenges and future development directions. It aims to provide comprehensive guidance and new research ideas for researchers entering this field.

Supramolecular TADF Materials from Calix[3]Acridan and Guest-Linked Polymers for Rapid and Visual Detection of Trace Benzene

In this work, a new strategy for rapid and visual detection of trace benzene vapor was reported by utilizing supramolecular thermally activated delayed fluorescence (STADF) polymeric materials via luminescence change mechanism. Consequently, a new type of multi-color STADF polymeric materials GPs@C[3]A were constructed by host-guest complexation between calix[3]acridan (C[3]A) and different guest-linked polymers (GPs). Interestingly, by adjusting the added molar proportion of C[3]A, multi-color TADF property of GPs@C[3]A could also be easily tuned. Notably, when a 20% molar ratio of C[3]A was added, GP1@C[3]A exhibited white luminescence. Especially, by using the high selectivity of C[3]A toward benzene and its differential binding affinities for acceptor guests versus benzene, rapid detection of trace benzene vapor was achieved in few seconds with the naked eyes. The limit of detection concentrations for benzene reached 3.5 mg L-1, indicating GPs@C[3]A could be used as an excellent sensor for rapid detection of benzene at trace level. Furthermore, GP1@C[3]A could also be fabricated into a visualized and convenient paper-based sensor strip for detecting benzene in cyclohexane. This work offers an innovative idea for the application of STADF materials in detection, and also addresses the key challenge of simultaneously improving sensitivity, selectivity and visualization in benzene detection.

Recent Applications of Pillararene-Inspired Water-Soluble Hosts

Pillararenes and their derivatives have emerged in supramolecular chemistry as unique macrocycles for applications in host-guest chemistry, materials science and biomimetics. Many variations have been conceived and synthesized in recent years and in this review, we relate progress in water-soluble versions: leaning towerarenes, extended-pillararenes, biphenarenes, helicarenes and octopusarenes. These are applied in targeted drug delivery, selective uptake and release of aromatic guests, fabrication of gold/silver and mesoporous silica nanoparticles, cell imaging, pollutant separation, biomedicine (e. g. biofilm disruptors, taste masking containers, neuromuscular blockers, antidotes for macromolecular biotoxin) and enantioselective recognition. It is intended that this review will be helpful for research in synthetic macrocyclic chemistry and supramolecular functional systems, leading to practical applications in various research areas.

Visible-light-induced synthesis of bibenzofuranones via a cerium-mediated energy transfer process

Benzofuran-3(2H)-one compounds are important bioactive molecules. Synthesis of bibenzofuranones from benzils via a radical cyclization-dimerization tandem process, efficiently constructing the C-O/C-C bonds and contiguous quaternary carbon centers in a single step was reported. This reaction exhibits high regioselectivity, affording bibenzofuranones in moderate to excellent yields under mild conditions. Mechanistic studies suggest that cerium sulfate serves as both an energy transfer reagent and an oxidant in this process.

Tuning triplet excitons and dynamic afterglow based on host-guest doping

Designing persistent dual-band afterglow materials with thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) contributed to solving the problems of homogenization and singularity in long afterglow materials. Here, six aryl acetonitrile (CBM) and aryl dicyanoaniline (AMBT) derivatives, used as host and guest materials respectively, were successfully designed and synthesized based on the isomerization effect. Among of them, 0.1 % m-CBM/p-AMBT showed the longest dual-band TADF (540 ms) and RTP lifetimes (721 ms), as well as persistent afterglow over 8 s, whose fluorescence (ΦFL), TADF (ΦT) and RTP (ΦP) quantum yields were 0.11, 0.06 and 0.22 in sequence. More interestingly, some doping systems constructed by CBM and AMBT series compounds showed persistent triple-band emissions composed of TADF, unimolecular and aggregated AMBT series compounds. What's more, ΦFL, ΦT and ΦP of 1 % o-AMBT@PMMA film were up to 0.17, 0.17, 0.23 in turn, with TADF, RTP and afterglow lifetimes of 606 ms, 727 ms, and 10 s respectively. TADF and RTP emission of CBM/AMBT series doping systems was attributed to host sensitized guest emission. Besides, the comparison displayed AMBT series compounds had bigger intensity ratios between TADF and RTP emission in PMMA films compared to in CBM series compounds. Finally, a series of data encryption were successfully constructed based on different afterglow lifetimes of the doping systems, and a dynamic anti-counterfeiting pattern was prepared by using different temperature responses of TADF and RTP emissions.

Multiple Pathways in the Triplet States Population for a Naphthalenediimide-C60 Dyad

The link of an antenna dye with an electron spin converter, in this case naphthalenediimide and C60, produces a system with a rich photophysics including the detection of more than one triplet state on the long timescale (tens of μs). Beside the use of optical spectroscopies in the ns and in the fs time scale, we used time-resolved Electron Paramagnetic Resonance (TREPR) to study the system evolution following photoexcitation. TREPR keeps track of the formation path of the triplet states through specific spin polarization patterns observed in the spectra. The flexibility of the linker and solvent polarity play a role in favouring either electron transfer or energy transfer processes.

Bridge effect on charge transfer and energy transfer in fullerene-chromophore dyads

Fullerene-chromophore dyads have attracted a great deal of research interest because these complexes can be potentially designed as nanoscale artificial photosynthetic centers, in which the chromophore and fullerene function as the electron donor and acceptor, respectively. The basic operation of this dyad-type artificial reaction center is photoinduced electron transfer from the donor to the acceptor. The fullerene and chromophore are usually covalently linked so that sufficient electronic coupling between these two moieties can facilitate the electron transfer. However, other deactivation pathways for the chromophore excited state, such as energy transfer to the fullerene, may reduce the quantum yield of the photoinduced electron transfer. Here, a series of C60-perylene dyads is exploited to interrogate the effect of the linkage on deactivation mechanisms of the chromophore excited state. For the C60-perylene dyads with a single or double bond bridge, we find that the decay of the singlet state of the chromophore is dominated by the electron transfer, and the corresponding time constant is determined to be 45 ps. On the other hand, for the dyad with a triple bond bridge, the singlet state of the chromophore is quickly quenched through energy transfer to fullerene, and the time constant is as short as 7.9 ps. Our finding suggests that the bond order of the bridge in the fullerene-chromophore dyads can be utilized to control the deactivation pathways of the excited state.

Supramolecular assembly activated single-molecule phosphorescence resonance energy transfer for near-infrared targeted cell imaging

Pure organic phosphorescence resonance energy transfer is a research hotspot. Herein, a single-molecule phosphorescence resonance energy transfer system with a large Stokes shift of 367 nm and near-infrared emission is constructed by guest molecule alkyl-bridged methoxy-tetraphenylethylene-phenylpyridines derivative, cucurbit[n]uril (n = 7, 8) and β-cyclodextrin modified hyaluronic acid. The high binding affinity of cucurbituril to guest molecules in various stoichiometric ratios not only regulates the topological morphology of supramolecular assembly but also induces different phosphorescence emissions. Varying from the spherical nanoparticles and nanorods for binary assemblies, three-dimensional nanoplate is obtained by the ternary co-assembly of guest with cucurbit[7]uril/cucurbit[8]uril, accompanying enhanced phosphorescence at 540 nm. Uncommonly, the secondary assembly of β-cyclodextrin modified hyaluronic acid and ternary assembly activates a single intramolecular phosphorescence resonance energy transfer process derived from phenyl pyridines unit to methoxy-tetraphenylethylene function group, enabling a near-infrared delayed fluorescence at 700 nm, which ultimately applied to mitochondrial targeted imaging for cancer cells.

Supramolecular Annihilator with DPA Parallelly Arranged by Multiple Hydrogen-Bonding Interactions for Enhanced Triplet-Triplet Annihilation Upconversion

The triplet annihilator is a critical component for triplet-triplet annihilation upconversion (TTA-UC); both the photophysical properties of the annihilator and the intermolecular orientation have pivotal effects on the overall efficiency of TTA-UC. Herein, we synthesized two supramolecular annihilators A-1 and A-2 by grafting 9,10-diphenylanthracene (DPA) fragments, which have been widely used as triplet annihilators for TTA-UC, on a macrocyclic host-pillar[5]arenes. In A-1, the orientation of the two DPA units was random, while, in A-2, the two DPA units were pushed to a parallel arrangement by intramolecular hydrogen-bonding interactions. The two compounds showed very similar photophysical properties and host-guest binding affinities toward electron-deficient guests, but showed totally different TTA-UC emissions. The UC quantum yield of A-2 could be optimized to 13.7% when an alkyl ammonia chain-attaching sensitizer S-2 was used, while, for A-1, only 5.1% was achieved. Destroying the hydrogen-bonding interactions by adding MeOH to A-2 significantly decreased the UC emissions, demonstrating that the parallel orientations of the two DPA units contributed greatly to the TTA-UC emissions. These results should be beneficial for annihilator designs and provide a new promising strategy for enhancing TTA-UC emissions.

A general supramolecular strategy for fabricating full-color-tunable thermally activated delayed fluorescence materials

Developing a facile and feasible strategy to fabricate thermally activated delayed fluorescence materials exhibiting full-color tunability remains an appealing yet challenging task. In this work, a general supramolecular strategy for fabricating thermally activated delayed fluorescence materials is proposed. Consequently, a series of host-guest cocrystals are prepared by electron-donating calix[3]acridan and various electron-withdrawing guests. Owing to the through-space charge transfer mediated by multiple noncovalent interactions, these cocrystals all display efficient thermally activated delayed fluorescence. Especially, by delicately modulating the electron-withdrawing ability of the guest molecules, the emission colors of these cocrystals can be continuously tuned from blue (440 nm) to red (610 nm). Meanwhile, high photoluminescence quantum yields of up to 87% is achieved. This research not only provides an alternative and general strategy for the fabrication of thermally activated delayed fluorescence materials, but also establishes a reliable supramolecular protocol toward the design of advanced luminescent materials.

Expanding the Anti-Stokes Shift of TTA-UC to 1.04 eV by Chemical Tuning of BODIPY-Based Organic Photosensitizers

A series of BODIPY-derivatives B-1 ∼ B-5 were synthesized as metal-free photosensitizers in triplet-triplet annihilation (TTA) upconversion (UC) with the purpose of finely tuning the excited state properties to reduce the energy loss during intersystem crossing (ISC), and hence to expand the anti-Stokes shift of TTA-UC. It was revealed that B-5 showed a ΔEST of as small as 0.28 eV, thus, providing a large anti-Stokes shift of 1.04 eV in TTA-UC with organic sensitizers. A deep red-blue upconversion emission with UC quantum yields of up to 10.7% (out of a 50% maximum) was observed.

Recent advances in supramolecular fullerene chemistry

Fullerene chemistry has come a long way since 1990, when the first bulk production of C60 was reported. In the past decade, progress in supramolecular chemistry has opened some remarkable and previously unexpected opportunities regarding the selective (multiple) functionalization of fullerenes and their (self)assembly into larger structures and frameworks. The purpose of this review article is to provide a comprehensive overview of these recent developments. We describe how macrocycles and cages that bind strongly to C60 can be used to block undesired addition patterns and thus allow the selective preparation of single-isomer addition products. We also discuss how the emergence of highly shape-persistent macrocycles has opened opportunities for the study of photoactive fullerene dyads and triads as well as the preparation of mechanically interlocked compounds. The preparation of two- or three-dimensional fullerene materials is another research area that has seen remarkable progress over the past few years. Due to the rapidly decreasing price of C60 and C70, we believe that these achievements will translate into all fields where fullerenes have traditionally (third-generation solar cells) and more recently been applied (catalysis, spintronics).

A supramolecular assembly-based strategy towards the generation and amplification of photon up-conversion and circularly polarized luminescence

For the molecular properties in which energy transfer/migration is determinantal, such as triplet-triplet annihilation-based photon up-conversion (TTAUC), the overall performance is largely affected by the intermolecular distance and relative molecular orientations. In such scenarios, tools that may steer the intermolecular interactions and provide control over molecular organisation in the bulk, become most valuable. Often these non-covalent interactions, found predominantly in supramolecular assemblies, enable pre-programming of the molecular network in the assembled structures. In other words, by employing supramolecular chemistry principles, an arrangement where molecular units are arranged in a desired fashion, very much like a Lego toy, could be achieved. This leads to enhanced energy transfer from one molecule to other. In recent past, chiral luminescent systems have attracted huge attention for producing circularly polarized luminescence (CPL). In such systems, chirality is a necessary requirement. Chirality induction/transfer through supramolecular interactions has been known for a long time. It was realized recently that it may help in the generation and amplification of CPL signals as well. In this review article we have discussed the applicability of self-/co-assembly processes for achieving maximum TTA-UC and CPL in various molecular systems.

Host-Guest Photosensitizer of a Cationic BODIPY Derivative and Cucurbit[7]uril for High-Efficiency Visible Light-Induced Photooxidation Reactions

In recent years, there has been a notable surge of interest in the fields of organic and pharmaceutical research about photocatalysts (PCs) and photosensitizers (PSs). In this study, a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) molecule adorned with quaternary ammonium (TMB) functionality was meticulously designed and synthesized. This compound has remarkable characteristics such as exceptional water solubility, great optical qualities, and commendable photostability. It can form a 1:1 complex (TMB-CB[7]) with cucurbit[7]uril (CB[7]) through host-guest interactions in the aqueous solution and shows obvious fluorescence enhancement. The reactive oxygen species (ROS) including superoxide anion radical (O2·-) and singlet oxygen (1O2) generation ability of TMB-CB[7] were promoted compared with that of TMB in the aqueous solution. More interestingly, the ROS generated from TMB-CB[7] can be used as PCs for aerobic cross dehydrogenation coupling reactions and photooxidation reactions in water with high yields of 89 and 95%, respectively. Therefore, the utilization of a host-guest PS presents a novel and environmentally friendly approach for conducting photocatalyzed organic processes under ambient conditions using visible light.

Recent update on the electroactive oligopyrrolic macrocyclic hosts with a Bucky-ball heart

Supramolecular chemistry is a multidisciplinary research area mostly associated with the investigation of host-guest interactions within intricate three-dimensional (3D) molecular architectures held together reversibly by various non-covalent interactions. Continuous efforts to develop such kinds of complex host-guest systems with designer oligopyrrolic macrocyclic receptors are a rapidly growing research domain, which is deeply involved in applied supramolecular chemistry research. These host-guest supramolecular complexes can be constructed by combining suitable electron-rich oligopyrrolic donors (as a host) with complementary electron-poor guests (as acceptors), held together by the ionic force of attraction triggered by intermolecular charge/electron transfer (CT/ET) transitions. Some of these resulting CT/ET ensembles are potential candidates for the construction of efficient optoelectronic materials, optical sensors, molecular switches, etc. In this Feature Article we aim to focus on these supramolecular ensembles composed by size and shape complementary electroactive oligopyrrolic molecular containers, which are suitable for spherical guest (e.g., buckminsterfullerene) complexation. We also provide a "state-of-the-art" overview on plausible applications of these particular host-guest systems. Our aim is to cover only specific electron-rich tetrathiafulvalene (TTF)-based oligopyrrolic receptors, e.g., TTF-calix[4]pyrroles, TTF-cryptands, TTF-porphyrins and exTTF-porphyrin-based molecular motifs reported to date, along with a brief outlining of their "functional behaviour" in materials chemistry research.

Efficient Red-to-Blue Triplet-Triplet Annihilation Upconversion Using the C70-Bodipy-Triphenylamine Triad as a Heavy-Atom-Free Triplet Photosensitizer

Triplet-triplet annihilation upconversion (TTA-UC) with heavy-atom-free organic triplet photosensitizers has attracted extensive attention recently, however, the successful examples with absorption in red and first near-infrared (NIR-I, 650-900 nm) region are still insufficient. Herein, we conducted a new TTA-UC system of perylene using C70-bodipy-triphenylamine triad (C70-BDP-T) as the heavy-atom-free photosensitizer. Efficient red-to-blue (663 to 450 nm) TTA-UC was achieved in this system with an anti-Stokes shift of 0.88 eV and a quantum yield up to 5.2% (out of a 50% maximum) in deaerated toluene. Notably, this is the highest quantum yield to date in similar TTA-UC systems with heavy-atom-free organic photosensitizers. Using steady-state and transient absorption spectroscopy, together with cyclic voltammogram and quantum chemical calculations, photophysical and photochemical mechanisms were elucidated. Specifically, two triplet triads, C70-3BDP*-T and 3C70*-BDP-T, were produced efficiently upon photoexcitation, with lifetimes of 2.0 ± 0.1 and 32.2 ± 0.3 μs, respectively. Electron transfer and recombination mechanisms were confirmed to play crucial roles in the formation of these triplets, instead of intersystem crossing. Our results shed light on the superiority of fullerenes in the development of heavy-atom-free photosensitizers.

Integrating Pillar[5]arene and BODIPY for a Supramolecular Nanoplatform To Achieve Synergistic Photodynamic Therapy and Chemotherapy

BODIPY photosensitizers have been integrated with a hypoxia-activated prodrug to achieve synergistic photodynamic therapy (PDT) and chemotherapy. A novel BODIPY derivative BDP-CN was designed and synthesized. It had two cyano groups to make it complex well with a water-soluble pillar[5]arene. Their association constant was calculated to be (6.8±0.9)×106  M-1 . After self-assembly in water, regular spherical nanocarriers can be formed; these were used to encapsulate the hypoxia-activated prodrug tirapazamine (TPZ). BDP-CN displayed excellent photodynamic activity to complete PDT. In this process, O2 can be continuously consumed to activate TPZ to allow it to be converted to a benzotriazinyl (BTZ) radical with high cytotoxicity to complete chemotherapy. As a result, the formed nanoparticles showed excellent synergistic photodynamic therapy and chemotherapy efficacy. The synergistic therapy mechanism is discussed in detail.

Amplified Triplet Emission of Organic Periphery Groups by Exothermic Triplet-Triplet Energy Transfer from the 3MLCT State of an Core Complex to the 3LC State of Geometrically Confined Carbazole/Naphthyl Tethers

To investigate the excited-state properties of metal-organic bichromophores, including energy transfer mechanisms, a series of new homoleptic N-heterocyclic carbene (NHC)-based iridium(III) complexes were prepared by incorporating a peripheral naphthalene (Np) (Ir(Nppmi)3: fac-/mer-Ir(1-Nppmi)3 and fac-/mer-Ir(2-Nppmi)3) or carbazole (Cz) (Ir(Czpmi)3: fac-/mer-Ir(o-Czpmi)3, fac-/mer-Ir(m-Czpmi)3, and fac-/mer-Ir(p-Czpmi)3) unit to the phenyl moiety of the phenylimidazole (pmi) ligand. Through a series of photophysical analyses and femtosecond time-resolved absorption (fs-TA) spectroscopy, it was discovered that the phosphorescence of the Ir core, (Ir(pmi)3), was considerably quenched, while intense phosphorescence peaks arising from the excited triplet Np (3Np*)/Cz (3Cz*) species were primarily observed at room temperature (r.t.) and low temperature. Such amplified phosphorescence of the tethered organic Np and Cz units originated from triplet-triplet energy transfer (TTET) from the high-lying metal-to-ligand charge transfer (3MLCT) state of the Ir(pmi)3 core to the ligand-centered triplet state (3LC) of the peripheral Np and Cz units. This result indicates that the exothermic intramolecular energy transfer (IET) in the excited triplet state realizes the efficient phosphorescent emission of geometrically confined organic tethers.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Triplet-Triplet Annihilation Upconversion in a Porphyrinic Molecular Container

Triplet-triplet annihilation-based molecular photon upconversion (TTA-UC) is a photophysical phenomenon that can yield high-energy emitting photons from low-energy incident light. TTA-UC is believed to fuse two triplet excitons into a singlet exciton through several consecutive energy-conversion processes. When organic aromatic dyes─i.e., sensitizers and annihilators─are used in TTA-UC, intermolecular distances, as well as relative orientations between the two chromophores, are important in an attempt to attain high upconversion efficiencies. Herein, we demonstrate a host-guest strategy─e.g., a cage-like molecular container incorporating two porphyrinic sensitizers and encapsulating two perylene emitters inside its cavity─to harness photon upconversion. Central to this design is tailoring the cavity size (9.6-10.4 Å) of the molecular container so that it can host two annihilators with a suitable [π···π] distance (3.2-3.5 Å). The formation of a complex with a host:guest ratio of 1:2 between a porphyrinic molecular container and perylene was confirmed by NMR spectroscopy, mass spectrometry, and isothermal titration calorimetry (ITC) as well as by DFT calculations. We have obtained TTA-UC yielding blue emission at 470 nm when the complex is excited with low-energy photons. This proof-of-concept demonstrates that TTA-UC can take place in one supermolecule by bringing together the sensitizers and annihilators. Our investigations open up some new opportunities for addressing several issues associated with supramolecular photon upconversion, such as sample concentrations, molecular aggregation, and penetration depths, which have relevance to biological imaging applications.

Relevance of the Cation in Anion Binding of a Triazole Host: An Analysis by Electrophoretic Nuclear Magnetic Resonance

Triazole hosts allow cooperative binding of anions via hydrogen bonds, which makes them versatile systems for application in anion binding catalysis to be performed in organic solvents. The anion binding behavior of a tetratriazole host is systematically studied by employing a variety of salts, including chloride, acetate, and benzoate, as well as different cations. Classical nuclear magnetic resonance (1H NMR) titrations demonstrate a large influence of cation structures on the anion binding constant, which is attributed to poor dissociation of most salts in organic solvents and corrupts the results of classical titration techniques. We propose an approach employing electrophoretic NMR (eNMR), yielding drift velocities of each species in an electric field and thus allowing a distinction between charged and uncharged species. After the determination of the dissociation constants KD for the salts, electrophoretic mobilities are measured for all species in the host-salt system and are analyzed in a model which treats anion binding as a consecutive reaction to salt dissociation, yielding a corrected anion binding constant KA. Interestingly, dependence of KA on salt concentration occurs, which is attributed to cation aggregation with the anion-host complex. Finally, by the extrapolation to zero salt concentration, the true anion-host binding constant is obtained. Thus, the approach by eNMR allows a fully quantitative analysis of two factors that might impair classical anion binding studies, namely, an incomplete salt dissociation as well as the occurrence of larger aggregate species.

Triplet-triplet annihilation upconversion in LAPONITE®/PVP nanocomposites: absolute quantum yields of up to 23.8% in the solid state and application to anti-counterfeiting

The low quantum efficiency in the solid phase and the highly efficient quenching by oxygen are two major weaknesses limiting the practical applications of triplet-triplet annihilation (TTA) upconversion (UC). Herein, we report an organic-inorganic hybrid nanocomposites fabricated by self-assembly of LAPONITE® clay and poly(N-vinyl-2-pyrrolidone) (PVP), which serves as excellent matrix for solid-state TTA-UC even in air. In the hybrid hydrogel doped by TTA-UC components, the anionic acceptors are arranged in an ordered manner at the nano-disk edge through electrostatic attraction, which avoids haphazard accumulation of the acceptors and allows for highly efficient inter-acceptor triplet energy migration. Moreover, the entangled PVP could not only protect the triplet excitons from oxygen quenching but even proactively eliminate oxygen by photoirradiation. Significantly, the dried gel prepared by completely removing water from the hydrogel gave absolute UC quantum efficiencies of up to 23.8% (out of a 50% maximum), which is the highest TTA-UC efficiency obtained in the solid state. The dried gels are readily made into powder by grinding with maintained UC emissions, making them convenient for application to information encryption and anti-counterfeiting security by virtue of the high UC quantum efficiency and insensitivity to oxygen.

BODIPY-conjugated bis-terpyridine Ru(II) complexes showing ultra-long luminescence lifetimes and applications to triplet-triplet annihilation upconversion

The poor excited-state properties of bis-terpyridine Ru(II) complexes have significantly limited the applications of these complexes as sensitizers in photocatalysis and triplet-triplet annihilation upconversion. In the present work, two novel ruthenium bis-terpyridine complexes (Ru-1 and Ru-2) conjugated with visible-light-harvesting bodipy chromophores were synthesized. These complexes showed strong absorption of visible light, the bodipy-localized intraligand triplet state (³IL) was efficiently populated, and the phosphorescence of bodipy at room temperature in both complexes was observed. The luminescence lifetimes of these complexes were significantly prolonged, with that of the heteroleptic complex Ru-2 prolonged to 37.9 μs and that of the homoleptic bis-terpyridine complex Ru-1 unprecedentedly prolonged to 356 μs, which was hundreds of times longer than the current longest emissive state achieved in ruthenium terpyridine complexes. The ultra-long triplet lifetimes and strong visible-light absorbing ability made them new candidates of triplet sensitizers, and were first applied to TTA-UC for terpyridine Ru(II) complexes with a Ru-1/Py system showing a Φ_UC of 2.93% in dilute solutions at concentrations as low as 1.0 μM.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Construction and Property Investigation of Serial Pillar[5]arene-Based [1]Rotaxanes

Although the construction and application of pillar[5]arene-based [1]rotaxanes have been extensively studied, the types of stoppers for them are limited. In this work, we designed and prepared three series of pillar[5]arene-based [1]rotaxanes (P5[1]Rs) with pentanedione derivatives, azobenzene derivatives, and salicylaldehyde derivatives as the stoppers, respectively. The obtained P5[1]Rs were fully characterized by NMR (1H, 13C, and 2D), mass spectra, and single-crystal X-ray analysis. We found that the synergic C-H···π, C-H···O interactions and N-H···O, O-H···N hydrogen bonding are the key to the stability of [1]rotaxanes. This work not only enriched the diversity of pillar[n]arene family but also gave a big boost to the pillar[n]arene-based mechanically interlocked molecules.

A host-guest strategy for converting the photodynamic agents from a singlet oxygen generator to a superoxide radical generator

Type-I photosensitizers (PSs) generate cytotoxic oxygen radicals by electron transfer even in a hypoxic environment. Nevertheless, the preparation of type-I PSs remains a challenge due to the competition of triplet-triplet energy transfer with O2 (type-II process). In this work, we report an effective strategy for converting the conventional type-II PS to a type-I PS by host-guest complexation. Electron-rich pillar[5]arenes are used as an electron donor and macrocyclic host to produce a host-guest complex with the traditional electron-deficient type-II PS, an iodide BODIPY-based guest. The host-guest complexation promotes intermolecular electron transfer from the pillar[5]arene moiety to BODIPY and then to O2 by the type-I process upon light-irradiation, leading to efficient generation of the superoxide radical (O2 -˙). The results of anti-tumor studies indicate that this supramolecular PS demonstrates high photodynamic therapy efficacy even under hypoxic conditions. This work provides an efficient method to prepare type-I PSs from existing type-II PSs by using a supramolecular strategy.

A Calix[3]acridan-Based Host-Guest Cocrystal Exhibiting Efficient Thermally Activated Delayed Fluorescence

A supramolecular strategy to construct thermally activated delayed fluorescence (TADF) materials through host-guest charge transfer interactions was proposed. Consequently, a new class of macrocycle namely calix[3]acridan was conveniently synthesized in 90 % yield. The host-guest cocrystal formed by calix[3]acridan and 1,2-dicyanobenzene exhibited efficient TADF properties due to intense intermolecular charge transfer interactions. Moreover, the spatially separated highest occupied molecular orbital and lowest unoccupied molecular orbital resulted in a very small singlet-triplet energy gap of 0.014 eV and hence guaranteed an efficient reverse intersystem crossing for TADF. Especially, a high photoluminescence quantum yield of 70 % was achieved, and it represents the highest value among the reported intermolecular donor-acceptor TADF materials.

Rim-differentiated pillar[5]arene based nonporous adaptive crystals

The first rim-differentiated pillar[5]arene based nonporous adaptive crystals (NACs) were developed and used to separate dichloromethane from a halomethane mixture with 99.1% purity.

Triplet–triplet sensitizing within pyrene-based COO-BODIPY: a breaking molecular platform for annihilating photon upconversion

Upconverted fluorescence assisted by triplet–triplet annihilation from heavy-atom-free photoactivatable multichromophoric organic assemblies.

Fullerene-containing pillar[n]arene hybrid composites

The construction and application of fullerene-containing pillar[n]arene organic–inorganic hybrid composites/systems has been discussed and summarized.

Versatile, stable, and air-tolerant triplet–triplet annihilation upconversion block copolymer micelles

A versatile, stable, and highly air-tolerant triplet–triplet annihilation up-conversion system based on block copolymer micelles was designed and fabricated.

Symmetrically Tetra-functionalized Pillar[6]arenes Prepared by Fragment Coupling

Due to the highly symmetrical structures generated from one-pot syntheses, the partial functionalization of macrocycles is usually beset with low yields and onerous purifications of the target multifunctional macrocycles. To improve this circumstance, taking pillar[6]arenes as an example, a two-step fragment coupling method is developed for synthesizing symmetrically tetra-functionalized pillar[6]arenes, namely X-pillar[6]arenes. This method is simple and versatile, which makes hetero-fragment coupling and pre-functionalization available. Nine new macrocycles and a pillar[6]arene-based cage are prepared. In addition, one of the newly synthesized macrocycles, COOEtEtXP[6] , exhibits a strong cyan luminescence in the solid state under irradiation by 365 nm UV light. This emission originates from intramolecular through-space conjugation. Meanwhile, formation of a supramolecular polymer by multiple non-covalent intra/intermolecular interactions help rigidify the structure and make COOEtEtXP[6] an efficient solid-state emitter. It is believed that this fragment coupling can also be used to realize the multi-functionalization of other macrocycles.

a-PET and Weakened Triplet-Triplet Annihilation Self-Quenching Effects in Benzo-21-Crown-7-Functionalized Diiodo-BODIPY

Weakening the triplet-triplet annihilation (TTA) self-quenching effect induced by sensitizers remains a tremendous challenge due to the very few investigations carried out on them. Herein, benzo-21-crown-7 (B21C7)-functionalized 2,6-diiodo-1,3,5,7-tetramethyl-8-phenyl-4,4-difluoroboradiazaindacene (DIBDP) was synthesized to investigate the influences of huge bulks and electron-rich cavities of B21C7 moieties on the fluorescence emission and triplet-state lifetimes of DIBDP moieties. Density functional theory (DFT)/time-dependent DFT (TDDFT) computable results preliminarily predicted that B21C7 moieties had influences on the fluorescence emissions of DIBDP moieties but not on their localization of triplet states of B21C7-functionalized DIBDP (B21C7-DIBDP). The UV-vis absorption spectra, fluorescence emission spectra, and cyclic voltammograms verified that there was an electron-transfer process from the B21C7 moiety to the DIBDP moiety in B21C7-DIBDP. However, the calculated results of ΔG _CS and E _CS values and nanosecond time-resolved transient absorption spectra demonstrated that the electron-transfer process from the B21C7 moiety to the DIBDP moiety in B21C7-DIBDP had direct influences on the fluorescence emission of DIBDP moieties but not on the triplet states of DIBDP moieties. The experimental values of triplet-state lifetimes of B21C7-DIBDP were obviously longer than those of DIBDP at a high concentration (1.0 × 10^-5 M); however, the fitted values of intrinsic triplet-state lifetimes of B21C7-DIBDP were slightly greater than those of DIBDP in the same solvent. These results demonstrated that the steric hindrance of B21C7 moieties could weaken the TTA self-quenching effect of DIBDP moieties at a high concentration and the a-PET effect induced a proportion of the produced singlet states of DIBDP moieties and could not emit fluorescence in the form of radiation transition but they could be transformed into triplet states through intersystem crossing (ISC) processes due to the iodine atoms in the DIBDP moiety. The stronger a-PET effects in polar solvents induced smaller fluorescence quantum yields so that more singlet states of DIBDP moieties were transformed into triplet states to weaken the TTA self-quenching effects.

Efficient Persistent Luminescence Tuning Using a Cyclodextrin Inclusion Complex as Efficient Light Conversion Materials

Developing an appropriate method to broaden the color of long persistent luminescence materials has important scientific significance and practical value but remains a great challenge. Herein, we have developed a unique strategy to fine-tune the persistent luminescence using the inclusion complex of rhodamine 6G with (2-hydroxypropyl)-β-cyclodextrin as efficient light conversion materials. The emitting color of the novel persistent luminescence material could be tuned from green to orange by changing the concentration of the light conversion agent. Furthermore, afterglow decay measurements showed that the initial afterglow brightness is 9.65 cd/m², and the initial afterglow brightness gradually decreased as the cyclodextrin inclusion compound coating increased. This design concept introduces a new perspective for broadening the luminescence color of afterglow phosphors, which may open up new opportunities for persistent luminescence materials toward many emerging applications.

Unique PDT and PTT synergistic effect between TPE and BODIPY

A novel intermolecular system D-π⋯π'-A was constructed with tetraphenylethylene (TPE) and borondipyrromethene (BODIPY), which had a synergistic effect on PDT and PTT (1 + 1 > 2). The PTT effect of TPD-BOA(D/A) was 1.7 times the sum of BOA + TPD; the effect of PDT_(TPA_+BOD₎ was 1.45 times the sum of TPA + BOD.

Mild Open-Shell Character of BODIPY and Its Impact on Singlet and Triplet Excitation Energies

This study describes and rationalizes the electronic structure of BODIPY combining a large variety of quantum chemistry methods and computational tools. Examination of the obtained results using state-of-the-art electronic structure analyses provides a new and complete interpretation of the nature of low-lying electronic states in BODIPY and elucidates the limitations of excited-state methods in the computation of T₁ and S₁ energies, that is, systematic under- and overestimation of time-dependent density functional theory energies, respectively, and a large overestimation of the T₁/S₁ energy gap. Our analysis identifies the important role and physical origin of the mild open-shell character in the BODIPY ground state, that is, strong highest occupied and lowest unoccupied molecular orbital exchange interactions. The study provides guidelines for the accurate quantification of the T₁/S₁ gap, which is extremely relevant for the computational investigation of the photophysical properties of BODIPY and its derivatives. These conclusions should be taken into consideration in order to predict and interpret conspicuous photoactivated phenomena such as intersystem crossing, singlet fission, and triplet-triplet annihilation. Moreover, we believe that our study might provide new ideas and strategies for the analysis of other molecular chromophores.

Controlling the triplet states and their application in external stimuli-responsive triplet-triplet-annihilation photon upconversion: from the perspective of excited state photochemistry

The property of organic light-responsive materials is determined by their electronic excited states to a large extent, for instance, the radiative decay rate constants, redox potentials, and lifetimes. Tuning the excited state properties with external stimuli will lead to versatile functional materials; a representative example is the fluorescence molecular probes, in which the singlet excited states are controlled by the external stimuli, i.e., by interaction with the analytes. In comparison, controlling the triplet excited state with external stimuli has been rarely reported, although it is also crucial for the development of novel materials for targeted photodynamic therapy (PDT) reagents and phosphorescent molecular probes. The reported results show that the principles used in singlet excited state tuning are unable to be simply applied to the triplet excited state. In this review article, we summarized the recent results on controlling the triplet excited states by the external stimuli (chemical or light), and the application of the triplet state tuning in the chemical/light controllable triplet-triplet-annihilation upconversion (TTA UC). We discussed the methods for the control of the triplet states, as well as singlet excited state, for the purpose of controlling the TTA UC. Both successful and unsuccessful methods are discussed. This information is helpful for understanding the photophysical processes in which the triplet excited state is involved, and the development of novel external stimuli-responsive triplet photosensitizers.

Steering Triplet-Triplet Annihilation Upconversion through Enantioselective Self-Assembly in a Supramolecular Gel

Research on chiral selection and recognition not only is of fundamental importance in resolving the origin of biological homochirality, but also is instructive in the fabrication of controlled molecular organization in supramolecular systems to modulate their chirality-related functional properties. Here we report an enantioselective assembly process between a chiral energy donor and two enantiomeric energy acceptors, which further results in chirality-controlled energy transfer and enantioselective triplet-triplet annihilation upconversion (TTA-UC). It is found that the chiral energy donor Pd(II) octaethylporphyrin derivative PdOEP-LG12 (R_D) can selectively coassemble with the chiral energy acceptor LGAn (R_A) with the same chiral scaffold but tends to form segregation with the energy acceptor DGAn (S_A) with the opposite chiral scaffold in a thermodynamic equilibrium state. Thus, the coassembly of R_A/R_D shows more effective triplet-triplet energy transfer (TTET) and stronger upconverted luminescence and upconverted circularly polarized luminescence in comparison to the segregation of S_A/R_D. The establishment of such an enantioselective TTA-UC system highlights the applications of chirality-regulated triplet fusion in optoelectronic materials.

Solvent-Driven Chirality Switching of a Pillar[4]arene[1]quinone Having a Chiral Amine-Substituted Quinone Subunit

Several new chiral pillar[4]arene[1]quinone derivatives were synthesized by reacting pillar[4]arene[1]quinone (EtP4Q1), containing four 1,4-diethoxybenzene units and one benzoquinone unit, with various chiral amines via Michael addition. Due to the direct introduction of chiral substituents on the rim of pillar[n]arene and the close location of the chiral center to the rim of EtP4Q1, the newly prepared compounds showed unique chiroptical properties without complicated chiral resolution processes, and unprecedented high anisotropy factor of up to −0.018 at the charge transfer absorption band was observed. Intriguingly, the benzene sidearm attached pillar[4]arene[1]quinone derivative 1a showed solvent- and complexation-driven chirality inversion. This work provides a promising potential for absolute asymmetric synthesis of pillararene-based derivatives.

Electrochemiluminescent Chiral Discrimination with a Pillar[5]arene Molecular Universal Joint-Coordinated Ruthenium Complex

A bicyclic pillar[5]arene derivative fused with a bipyridine side ring, a so-called molecular universal joint (MUJ), was synthesized, and the pair of enantiomers was resolved by high-performance liquid chromatography enantioresolution. The electrochemiluminescent detection based on the ruthenium complex of the enantiopure MUJ showed excellent chiral discrimination toward certain amino acids.

Switching Photon Upconversion by Using Photofluorochromic Annihilator with Low-Lying Triplet

Photon upconversion based on triplet-triplet annihilation (TTA-UC) has attracted great attention due to its remarkable features including the high upconversion quantum yield, low threshold, and flexible combination of sensitizer and annihilator. Endowing TTA-UC with responsiveness will offer additional application dimensions; however, it is a challenge to develop annihilators with responsive features in the excited triplet state. Here we demonstrate the synthesis and photophysical behaviors of photofluorochromic annihilators derived from fluorescent diarylethenes. A series of turn-on mode fluorescent diarylethenes based on 1,2-bis(2-ethyl-1-benzothiophen-1,1-dioxide-3-yl)perfuorocyclopentene were synthesized, and their photochromism and photofluorochromism behaviors were thoroughly investigated. When sensitized by near-infrared ruthenium phthalocyanine, TTA-UC could be observed under excitation of 730 nm, accompanied by upconverted emission ranging from 500 to 700 nm. Because of the photoresponsive properties of the annihilators, TTA-UC can be switched between "on" and "off" by alternating irradiation of ultraviolet and visible light.

Spin-Orbit Charge-Transfer Intersystem Crossing in Anthracene-Perylenebisimide Compact Electron Donor-Acceptor Dyads and Triads and Photochemical Dianion Formation

Perylenebisimide (PBI)-anthracene (AN) donor-acceptor dyads/triad were prepared to investigate spin-orbit charge-transfer intersystem crossing (SOCT-ISC). Molecular conformation was controlled by connecting PBI units to the 2- or 9-position of the AN moiety. Steady-state, time-resolved transient absorption and emission spectroscopy revealed that chromophore orientation, electronic coupling, and dihedral angle between donor and acceptor exert a significant effect on the photophysical property. The dyad PBI-9-AN with orthogonal geometry shows weak ground-state coupling and efficient intersystem crossing (ISC, Φ_Δ =86 %) as compared with PBI-2-AN (Φ_Δ =57 %), which has a more coplanar geometry. By nanosecond transient absorption spectroscopy, a long-lived PBI localized triplet state was observed (τ_T =139 μs). Time-resolved EPR spectroscopy demonstrated that the electron spin polarization pattern of the triplet state is sensitive to the geometry and number of AN units attached to PBI. Reversible and stepwise generation of near-IR-absorbing PBI radical anion (PBI^-⋅ ) and dianion (PBI^2- ) was observed on photoexcitation in the presence of triethanolamine, and it was confirmed that selective photoexcitation at the near-IR absorption bands of PBI^.- is unable to produce PBI^2- .

Weakened Triplet-Triplet Annihilation of Diiodo-BODIPY Moieties without Influence on Their Intrinsic Triplet Lifetimes in Diiodo-BODIPY-Functionalized Pillar[5]arenes

The triplet-triplet annihilation (TTA) effect of sensitizers themselves can lead to the additional quenching of lifetimes of triplet states; therefore, how to weaken the TTA effect of sensitizers is an urgent issue to be resolved for their further applications. Besides, it remains a tremendous challenge for constructing supramolecular systems of photosensitizers based on photosensitizer-functionalized pillararenes because there have been very few investigations on them. Thus, 2,6-diiodo-1,3,5,7-tetramethyl-8-phenyl-4,4-difluoroboradiazaindacene (DIBDP) and ethoxy pillar[5]arene (EtP5) were utilized to synthesize a DIBDP-functionalized pillar[5]arene (EtP5-DIBDP), a cyano-containing DIBDP (G) used as a guest molecule was also prepared, and they were used to investigate the electron-transfer mechanism between EtP5 and DIBDP moieties and weaken the TTA effect of DIBDP moieties. The theoretical computational results of frontier molecular orbitals and isosurfaces of spin density preliminarily predicted that the cavities of the EtP5 moiety had influence on the fluorescence emission of DIBDP units but not on their triplet states in EtP5-DIBDP. The fluorescence emission intensities in a variety of solvents with different polarities and electrochemical studies revealed that there was electron transfer from EtP5 to the DIBDP units, and the electron-transfer process had influence on the fluorescence emission but not on the triplet states of DIBDP moieties in EtP5-DIBDP, which verified the results of density functional theory calculations. The triplet state lifetimes of EtP5-DIBDP were longer than those of DIBDP and G and the photooxidation abilities of EtP5-DIBDP were better than those of DIBDP and G at a high concentration (1.0 × 10^-5 M) in various solvents; in contrast, the intrinsic triplet state lifetimes and singlet oxygen quantum yields (Φ_Δ) of DIBDP, G, and EtP5-DIBDP were very similar. This was because the steric hindrance of EtP5 moieties could weaken the TTA effect of DIBDP moieties without influencing their intrinsic triplet state lifetimes in EtP5-DIBDP.

Directional Water Transfer Janus Nanofibrous Porous Membranes for Particulate Matter Filtration and Volatile Organic Compound Adsorption

In order to reduce the possible harm caused by air pollution, excellent personal protective materials are attracting more and more attention. Therefore, the research of multifunctional materials that can filter particulate matter (PM) and volatile organic compounds (VOCs) simultaneously is of great significance. In addition, in cold weather, water vapor in the exhaled gas condenses into small droplets inside the respirator causing uncomfortable feeling of dampness. Herein, we prepared several types of cyclodextrin-containing Janus nanofibrous porous membranes by electrospinning, which can efficiently filter PM of different sizes in the air, effectively adsorb VOCs, and orientate moisture from exhaled gas to the outside of the membranes to provide a dry and comfortable environment. These advantageous features, combined with the cheap price and easy availability of component materials and low respiratory resistance, highlight the great potential of these Janus nanofibrous porous membranes in the development of personal wearable air purifiers.

A pillar[5]arene-based 3D polymer network for efficient iodine capture in aqueous solution

A pillar[5]arene-based 3D polymer network is constructed. It possesses good stability, recyclability and high efficiency in iodine capture in aqueous solution.