Tight Binding of Carboxylate, Phosphonate, and Carbamate Anions to Stoichiometric CdSe Nanocrystals

Metal Ion Dynamic Nuclear Polarization in Mn(II)-Doped CdS Nanocrystals: Atomic-Scale Investigation of the Dopant and Its Host

Development of functional nanocrystals requires precise control over their composition and structure. Particularly, surface composition, defects, and doping play a central role in our ability to develop functional nanomaterials. As such, there is great interest in capturing these properties. Solid-state NMR spectroscopy is a powerful tool for probing structural and compositional features at the atomic scale, in particular, when it is coupled with the high sensitivity gained by dynamic nuclear polarization (DNP). DNP enhances NMR sensitivity by transferring high electron spin polarization to the surrounding nuclear spins. This dramatically improves the signal intensity, making it a valuable tool for detecting subtle structural features. Utilizing metal ion dopants as polarization agents for DNP has been shown to be an excellent approach to increasing ssNMR sensitivity in the bulk of inorganic solids. Here, we demonstrate the implementation of this approach to nanocrystals, focusing on Mn(II)-doped CdS, where homogeneous doping is known to be challenging while being critical for the DNP process. The intricate nature of the doping was elucidated by quantitative electron microscopy and electron paramagnetic resonance spectroscopy. We confirmed that Mn(II) doping is confined to the core of the nanocrystals and that statistically dopants are homogeneously distributed within each nanocrystal. DNP from Mn(II) dopants is then shown to increase 113Cd NMR sensitivity by an order of magnitude, enabling distinction between core and surface environments as well as the detection of defects in the bulk of the nanocrystals. We expect that the approach can be extended to other nanocrystals, providing an efficient route for characterizing their bulk and surface properties.

Synchronous Passivation Boosts the NIR-II Luminescence Efficiency of Ag2S Nanocrystals for Effective Deep Tissue Lymphatic Mapping

Silver sulfide nanocrystals (Ag2S NCs) with second near-infrared (NIR-II) emission and excellent biocompatibility hold great attraction for in vivo imaging. However, current Ag2S NCs suffer severely with low photoluminescence quantum yields (PLQYs), limiting the penetration depth. Herein, based on computational prediction, we proposed a facile synchronous passivation strategy employing non-toxic MgCl2 as a synchronous passivator for simultaneous Mg-doping and chlorination of Ag2S NCs (Syn-Ag2S). Spectroscopic studies including femtosecond transient absorption measurement (fs-TAS) and temperature-dependent PL spectra revealed that syn-passivation successfully enlarged nonradiative activation energy and reduced the defect states and exciton-photon interaction, thus resulting in a record high absolute PLQY of 46 ± 2% at 1220 nm emission among toxic-element-free NIR-II probes. The boosted emission unlocks the potential of Ag2S NCs for deep lymph node imaging. The profile of deep lumbar lymph nodes was clearly distinguished by Syn-Ag2S, while clinical indocyanine green (ICG) failed to do so. This strategy also establishes an approach for developing other ultrabright and non-toxic NCs used not only in bioimaging but also in photovoltaics and LEDs.

Blue Quantum Dot Light-Emitting Diodes toward Full-Color Displays: Materials, Devices, and Large-Scale Fabrication

Quantum dots (QDs) light-emitting diodes (QLEDs) are gaining significant interest for the next generation of display and lighting applications because of their wide color gamut, cost-effective solution processability, and good stability. The last decades have witnessed rapid advances in improving their efficiency and lifetime. So far, among the three primary colors of QLEDs devices, the performance of blue QLEDs is considerably inferior to that of green and red ones including Cd-based and Cd-free devices, which is a key bottleneck hindering QLEDs' application. This mini-review describes recent advances of blue Cd-based and Cd-free QLEDs from materials to device engineering, in particular, elaborating the essential factors that limit their performance and the degradation mechanisms. We also discuss the progress and challenges of large-scale displays. Finally, we propose possible approaches to improve the performance of the blue QLEDs, including QDs materials and device architecture optimization, and summarize potential applications in this stimulating field.

Steric stabilization of colloidal UiO-66 nanocrystals with oleylammonium octadecylphosphonate

We report the synthesis and characterization of octahedral UiO-66 nanocrystals (d = 17-25 nm) terminated with amine, oleate, and octadecylphosphonate ligands. Acetate capped UiO-66 nanocrystals were dispersed in toluene using oleic acid and oleylamine. Ligand exchange with octadecylphosphonic acid produces ammonium octadecylphosphonate terminated nanocrystals with coverages of 2.6-3.2 chains per nm2 that stabilize colloidal dispersions in nonpolar solvents. Liquid phase 1H and 31P nuclear magnetic resonance (NMR) spectra of the linkers and surface ligands display line shapes that are broadened by slow tumbling of the nanocrystals. Octadecylphosphonate functionalized MOFs have up to ∼30% carbon dioxide absorption capacities compared to bulk UiO-66 after correcting for the ligand mass. These results illustrate the intriguing perspective that MOF nanocrystals can be characterized and manipulated like a macromolecular complex and represent an important milestone in the nascent field of MOF surface science.

Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots

Solution-processed colloidal III-V semiconductor quantum dot photodiodes (QPDs) have potential applications in short-wavelength infrared (SWIR) imaging due to their tunable spectral response range, possible multiple-exciton generation, operation at 0-V bias voltage and low-cost fabrication and are also expected to replace lead- and mercury-based counterparts that are hampered by reliance on restricted elements (RoHS). However, the use of III-V CQDs as photoactive layers in SWIR optoelectronic applications is still a challenge because of underdeveloped ligand engineering for improving the in-plane conductivity of the QD assembled films. Here, we report on ligand engineering of InSb CQDs to enhance the optical response performance of self-powered SWIR QPDs. Specifically, by replacing the conventional ligand (i.e., oleylamine) with sulfide, the interparticle distance between the CQDs was shortened from 5.0 ± 0.5 nm to 1.5 ± 0.5 nm, leading to improved carrier mobility for high photoresponse speed to SWIR light. Furthermore, the use of sulfide ligands resulted in a low dark current density (∼nA cm-2) with an improved EQE of 18.5%, suggesting their potential use in toxic-based infrared image sensors.

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxide coatings with the solution processability of the nanocrystals. However, challenges persist in applying this method, which relate to finding precursors that promote the growth of the metal oxide while preserving colloidal stability throughout the process. Herein, we introduce a colloidal ALD method to coat nanocrystals with amorphous metal oxide shells using metal and oxygen precursors that act as colloidal stabilizing ligands. Our scheme involves metal-amide precursors modified with solubilizing groups and oleic acid as the oxygen source. The growth of the oxide is self-limiting and proceeds in a layer-by-layer fashion. Our protocol is generalizable and intrinsically scalable. Potential applications in display, light detection, and catalysis are envisioned.

Physico-Chemical Properties of CdTe/Glutathione Quantum Dots Obtained by Microwave Irradiation for Use in Monoclonal Antibody and Biomarker Testing

In this report, we present the results on the physicochemical characterization of cadmium telluride quantum dots (QDs) stabilized with glutathione and prepared by optimizing the synthesis conditions. An excellent control of emissions and the composition of the nanocrystal surface for its potential application in monoclonal antibody and biomarker testing was achieved. Two samples (QDYellow, QDOrange, corresponding to their emission colors) were analyzed by dynamic light scattering (DLS), and their hydrodynamic sizes were 6.7 nm and 19.4 nm, respectively. Optical characterization by UV-vis absorbance spectroscopy showed excitonic peaks at 517 nm and 554 nm. Photoluminescence spectroscopy indicated that the samples have a maximum intensity emission at 570 and 606 nm, respectively, within the visible range from yellow to orange. Infrared spectroscopy showed vibrational modes corresponding to the functional groups OH-C-H, C-N, C=C, C-O, C-OH, and COOH, which allows for the formation of functionalized QDs for the manufacture of biomarkers. In addition, the hydrodynamic radius, zeta potential, and approximate molecular weight were determined by dynamic light scattering (DLS), electrophoretic light scattering (ELS), and static light scattering (SLS) techniques. Size dispersion and the structure of nanoparticles was obtained by Transmission Electron Microscopy (TEM) and by X-ray diffraction. In the same way, we calculated the concentration of Cd2+ ions expressed in mg/L by using the Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-OES). In addition to the characterization of the nanoparticles, the labeling of murine myeloid cells was carried out with both samples of quantum dots, where it was demonstrated that quantum dots can diffuse into these cells and connect mostly with the cell nucleus.

Unraveling the Luminescence Quenching Mechanism in Strong and Weak Quantum-Confined CsPbBr3 Triggered by Triarylamine-Based Hole Transport Layers

Luminescence quenching by hole transport layers (HTLs) is one of the major issues in developing efficient perovskite light-emitting diodes (PeLEDs), which is particularly prominent in blue-emitting devices. While a variety of material systems have been used as interfacial layers, the origin of such quenching and the type of interactions between perovskites and HTLs are still ambiguous. Here, we present a systematic investigation of the luminescence quenching of CsPbBr3 by a commonly employed hole transport polymer, poly[(9,9-dioctylfluorenyl-2,7diyl)-co-(4,4'-(N-(4-sec-butylphenyl) diphenylamine)] (TFB), in LEDs. Strong and weak quantum-confined CsPbBr3 (nanoplatelets (NPLs)/nanocrystals (NCs)) are rationally selected to study the quenching mechanism by considering the differences in their morphology, energy level alignments, and quantum confinement. The steady-state and time-resolved Stern-Volmer plots unravel the dominance of dynamic and static quenching at lower and higher concentrations of TFB, respectively, with a maximum quenching efficiency of 98%. The quenching rate in NCs is faster than that in NPLs owing to their longer PL lifetimes and weak quantum confinement. The ultrafast transient absorption results support these dynamics and rule out the involvement of Forster or Dexter energy transfer. Finally, the 1D 1H and 2D nuclear overhauser effect spectroscopy nuclear magnetic resonance (NOESY NMR) study confirms the exchange of native ligands at the NCs surface with TFB, leading to dark CsPbBr3-TFB ensemble formation accountable for luminescence quenching. This highlights the critical role of the triarylamine functional group on TFB (also the backbone of many HTLs) in the quenching process. These results shed light on the underlying reasons for the luminescence quenching in PeLEDs and will help to rationally choose the interfacial layers for developing efficient LEDs.

Ligand Exchange of Quantum Dots: A Thermodynamic Perspective

Colloidal quantum dots (QDs) consist of an inorganic core and organic surface ligands. Surface ligands play a dominant role in maintaining the colloidal stability of QDs and passivating the surface defects of QDs. However, the original ligands introduced in the synthetic process of QDs cannot meet the requirements for diverse applications; therefore, ligand exchanges with functional ligands are mandatory. Understanding the ligand exchange process requires a comprehensive combination of the concepts and techniques of surface chemistry. In this Perspective, the ligand exchange process is discussed in detail. Specifically, we elaborate on the thermodynamics that can reveal the feasibility and mechanism of ligand exchange. It depicts a critical physical picture of the surface of QDs along with the following ligand exchange.

Exploiting Organometallic Chemistry to Functionalize Small Cuprous Oxide Colloidal Nanocrystals

The ligand chemistry of colloidal semiconductor nanocrystals mediates their solubility, band gap, and surface facets. Here, selective organometallic chemistry is used to prepare small, colloidal cuprous oxide nanocrystals and to control their surface chemistry by decorating them with metal complexes. The strategy is demonstrated using small (3-6 nm) cuprous oxide (Cu2O) colloidal nanocrystals (NC), soluble in organic solvents. Organometallic complexes are coordinated by reacting the surface Cu-OH bonds with organometallic reagents, M(C6F5)2, M = Zn(II) and Co(II), at room temperature. These reactions do not disrupt the Cu2O crystallinity or nanoparticle size; rather, they allow for the selective coordination of a specific metal complex at the surface. Subsequently, the surface-coordinated organometallic complex is reacted with three different carboxylic acids to deliver Cu-O-Zn(O2CR') complexes. Selective nanocrystal surface functionalization is established using spectroscopy (IR, 19F NMR), thermal gravimetric analyses (TGA), transmission electron microscopy (TEM, EELS), and X-ray photoelectron spectroscopy (XPS). Photoluminescence efficiency increases dramatically upon organometallic surface functionalization relative to that of the parent Cu2O NC, with the effect being most pronounced for Zn(II) decoration. The nanocrystal surfaces are selectively functionalized by both organic ligands and well-defined organometallic complexes; this synthetic strategy may be applicable to many other metal oxides, hydroxides, and semiconductors. In the future, it should allow NC properties to be designed for applications including catalysis, sensing, electronics, and quantum technologies.

Atomically precise nanoclusters predominantly seed gold nanoparticle syntheses

Seed-mediated synthesis strategies, in which small gold nanoparticle precursors are added to a growth solution to initiate heterogeneous nucleation, are among the most prevalent, simple, and productive methodologies for generating well-defined colloidal anisotropic nanostructures. However, the size, structure, and chemical properties of the seeds remain poorly understood, which partially explains the lack of mechanistic understanding of many particle growth reactions. Here, we identify the majority component in the seed solution as an atomically precise gold nanocluster, consisting of a 32-atom Au core with 8 halide ligands and 12 neutral ligands constituting a bound ion pair between a halide and the cationic surfactant: Au₃₂X₈[AQA⁺•X^-]₁₂ (X = Cl, Br; AQA = alkyl quaternary ammonium). Ligand exchange is dynamic and versatile, occurring on the order of minutes and allowing for the formation of 48 distinct Au₃₂ clusters with AQAX (alkyl quaternary ammonium halide) ligands. Anisotropic nanoparticle syntheses seeded with solutions enriched in Au₃₂X₈[AQA⁺•X^-]₁₂ show narrower size distributions and fewer impurity particle shapes, indicating the importance of this cluster as a precursor to the growth of well-defined nanostructures.

CdS Quantum Dots for Metallaphotoredox-Enabled Cross-Electrophile Coupling of Aryl Halides with Alkyl Halides

Semiconductor quantum dots (QDs) offer many advantages as photocatalysts for synthetic photoredox catalysis, but no reports have explored the use of QDs with nickel catalysts for C-C bond formation. We show here that 5.7 nm CdS QDs are robust photocatalysts for photoredox-promoted cross-electrophile coupling (40 000 TON). These conditions can be utilized on small scale (96-well plate) or adapted to flow. NMR studies show that triethanolamine (TEOA) capped QDs are the active catalyst and that TEOA can displace native phosphonate and carboxylate ligands, demonstrating the importance of QD surface chemistry.

Coordination of Quantum Dots in a Polar Solvent by Small-Molecule Imidazole Ligands

Colloidal quantum dots (QDs) are attractive fluorophores for bioimaging and biomedical applications because of their favorable and tunable optoelectronic properties. In this study, the native hydrophobic ligand environment of oleate-capped sphalerite CdSe/ZnS core/shell QDs was quantitatively exchanged with a set of imidazole-bearing small-molecule ligands. Inductively coupled plasma-optical emission spectroscopy and ¹H NMR were used to identify and quantify three different ligand exchange processes: Z-type dissociation of the Zn(oleate)₂, L-type association of the imidazole, and X-type anionic exchange of oleate with Cl^-, all of which contributed to the overall ligand exchange.

CdS Quantum Dots as Potent Photoreductants for Organic Chemistry Enabled by Auger Processes

Strong reducing agents (<-2.0 V vs saturated calomel electrode (SCE)) enable a wide array of useful organic chemistry, but suffer from a variety of limitations. Stoichiometric metallic reductants such as alkali metals and SmI₂ are commonly employed for these reactions; however, considerations including expense, ease of use, safety, and waste generation limit the practicality of these methods. Recent approaches utilizing energy from multiple photons or electron-primed photoredox catalysis have accessed reduction potentials equivalent to Li⁰ and shown how this enables selective transformations of aryl chlorides via aryl radicals. However, in some cases, low stability of catalytic intermediates can limit turnover numbers. Herein, we report the ability of CdS nanocrystal quantum dots (QDs) to function as strong photoreductants and present evidence that a highly reducing electron is generated from two consecutive photoexcitations of CdS QDs with intermediate reductive quenching. Mechanistic experiments suggest that Auger recombination, a photophysical phenomenon known to occur in photoexcited anionic QDs, generates transient thermally excited electrons to enable the observed reductions. Using blue light-emitting diodes (LEDs) and sacrificial amine reductants, aryl chlorides and phosphate esters with reduction potentials up to -3.4 V vs SCE are photoreductively cleaved to afford hydrodefunctionalized or functionalized products. In contrast to small-molecule catalysts, QDs are stable under these conditions and turnover numbers up to 47 500 have been achieved. These conditions can also effect other challenging reductions, such as tosylate protecting group removal from amines, debenzylation of benzyl-protected alcohols, and reductive ring opening of cyclopropane carboxylic acid derivatives.

Direct Heat-Induced Patterning of Inorganic Nanomaterials

Patterning functional inorganic nanomaterials is an important process for advanced manufacturing of quantum dot (QD) electronic and optoelectronic devices. This is typically achieved by inkjet printing, microcontact printing, and photo- and e-beam lithography. Here, we investigate a different patterning approach that utilizes local heating, which can be generated by various sources, such as UV-, visible-, and IR-illumination, or by proximity heat transfer. This direct thermal lithography method, termed here heat-induced patterning of inorganic nanomaterials (HIPIN), uses colloidal nanomaterials with thermally unstable surface ligands. We designed several families of such ligands and investigated their chemical and physical transformations responsible for heat-induced changes of nanocrystal solubility. Compared to traditional photolithography using photochemical surface reactions, HIPIN extends the scope of direct optical lithography toward longer wavelengths of visible (532 nm) and infrared (10.6 μm) radiation, which is necessary for patterning optically thick layers (e.g., 1.2 μm) of light-absorbing nanomaterials. HIPIN enables patterning of features defined by the diffraction-limited beam size. Our approach can be used for direct patterning of metal, semiconductor, and dielectric nanomaterials. Patterned semiconductor QDs retain the majority of their as-synthesized photoluminescence quantum yield. This work demonstrates the generality of thermal patterning of nanomaterials and provides a new path for additive device manufacturing using diverse colloidal nanoscale building blocks.

Synthetic Mechanisms in the Formation of SnTe Nanocrystals

Infrared active colloidal semiconducting nanocrystals (NCs) are important for applications including photodetectors and photovoltaics. While much research has been conducted on nanocrystalline materials such as the Pb and Hg chalcogenides, less toxic alternatives such as SnTe have been far less explored. Previous synthetic work on SnTe NCs have characterized photophysical properties of the nanoparticles. This study focuses on understanding the fundamental chemical mechanisms involved in SnTe NC formation, with the aim to improve synthetic outcomes. The solvent oleylamine, common to all SnTe syntheses, is found to form a highly reactive, heteroleptic Sn-oleylamine precursor that is the primary molecular Sn species initiating NC formation and growth. Further, the capping ligand oleic acid (OA) reacts with this amine to produce tin oxide (SnO_x), facilitating the formation of an NC SnO_x shell. Therefore, the use of OA during synthesis is counterproductive to the formation of stoichiometric SnTe nanoparticles. The knowledge of chemical reaction mechanisms creates a foundation for the production of high-quality, unoxidized, and stoichiometric SnTe NCs.

Entropy of Branching Out: Linear versus Branched Alkylthiols Ligands on CdSe Nanocrystals

Surface ligands of semiconductor nanocrystals (NCs) play key roles in determining their colloidal stability and physicochemical properties and are thus enablers also for the NCs flexible manipulation toward numerous applications. Attention is usually paid to the ligand binding group, while the impact of the ligand chain backbone structure is less discussed. Using isothermal titration calorimetry (ITC), we studied the effect of structural changes in the ligand chain on the thermodynamics of the exchange reaction for oleate coated CdSe NCs, comparing linear and branched alkylthiols. The investigated alkylthiol ligands differed in their backbone length, branching position, and branching group length. Compared to linear ligands, lower exothermicity and entropy loss were observed for an exchange with branched ligands, due to steric hindrance in ligand packing, thereby justifying their previous classification as "entropic ligands". Mean-field calculations for ligand binding demonstrate the contribution to the overall entropy originating from ligand conformational entropy, which is diminished upon binding mainly by packing of NC-bound ligands. Model calculations and the experimental ITC data both point to an interplay between the branching position and the backbone length in determining the entropic nature of the branched ligand. Our findings suggest that the most entropic ligand should be a short, branched ligand with short branching group located toward the middle of the ligand chain. The insights provided by this work also contribute to a future smarter NC surface design, which is an essential tool for their implementation in diverse applications.

Thermodynamics of nanocrystal–ligand binding through isothermal titration calorimetry

Manipulations of nanocrystal (NC) surfaces have propelled the applications of colloidal NCs across various fields such as bioimaging, catalysis, electronics, and sensing applications.

Tuning the local chemical environment of ZnSe quantum dots with dithiols towards photocatalytic CO2 reduction

Sunlight-driven CO₂ reduction to renewable fuels is a promising strategy towards a closed carbon cycle in a circular economy. For that purpose, colloidal quantum dots (QDs) have emerged as a versatile light absorber platform that offers many possibilities for surface modification strategies. Considerable attention has been focused on tailoring the local chemical environment of the catalytic site for CO₂ reduction with chemical functionalities ranging from amino acids to amines, imidazolium, pyridines, and others. Here we show that dithiols, a class of organic compounds previously unexplored in the context of CO₂ reduction, can enhance photocatalytic CO₂ reduction on ZnSe QDs. A short dithiol (1,2-ethanedithiol) activates the QD surface for CO₂ reduction accompanied by a suppression of the competing H₂ evolution reaction. In contrast, in the presence of an immobilized Ni(cyclam) co-catalyst, a longer dithiol (1,6-hexanedithiol) accelerates CO₂ reduction. ¹H-NMR spectroscopy studies of the dithiol-QD surface interactions reveal a strong affinity of the dithiols for the QD surface accompanied by a solvation sphere governed by hydrophobic interactions. Control experiments with a series of dithiol analogues (monothiol, mercaptoalcohol) render the hydrophobic chemical environment unlikely as the sole contribution of the enhancement of CO₂ reduction. Density functional theory (DFT) calculations provide a framework to rationalize the observed dithiol length dependent activity through the analysis of the non-covalent interactions between the dangling thiol moiety and the CO₂ reduction intermediates at the catalytic site. This work therefore introduces dithiol capping ligands as a straightforward means to enhance CO₂ reduction catalysis on both bare and co-catalyst modified QDs by engineering the particle's chemical environment.

ZnSe quantum dots (yellow sphere) are modified with dithiols of various lengths for enhanced visible light-driven CO₂ to CO reduction in either the absence or presence of a molecular Ni co-catalyst.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

Tuning the interfacial stoichiometry of InP core and InP/ZnSe core/shell quantum dots

We demonstrate fine-tuning of the atomic composition of InP/ZnSe quantum dots (QDs) at the core/shell interface. Specifically, we control the stoichiometry of both anions (P, As, S, and Se) and cations (In and Zn) at the InP/ZnSe core/shell interface and correlate these changes with the resultant steady-state and time-resolved optical properties of the nanocrystals. The use of reactive trimethylsilyl reagents results in surface-limited reactions that shift the nanocrystal stoichiometry to anion-rich and improve epitaxial growth of the shell layer. In general, anion deposition on the InP QD surface results in a redshift in the absorption, quenching of the excitonic photoluminescence, and a relative increase in the intensity of broad trap-based photoluminescence, consistent with delocalization of the exciton wavefunction and relaxation of exciton confinement. Time-resolved photoluminescence data for the resulting InP/ZnSe QDs show an overall small change in the decay dynamics on the ns timescale, suggesting that the relatively low photoluminescence quantum yields may be attributed to the creation of new thermally activated charge trap states and likely a dark population that is inseparable from the emissive QDs. Cluster-model density functional theory calculations show that the presence of core/shell interface anions gives rise to electronic defects contributing to the redshift in the absorption. These results highlight a general strategy to atomistically tune the interfacial stoichiometry of InP QDs using surface-limited reaction chemistry allowing for precise correlations with the electronic structure and photophysical properties.

Ligand Locking on Quantum Dot Surfaces via a Mild Reactive Surface Treatment

At the outermost surface of colloidal QDs are organic surface ligands which dynamically bind and release in solution to control the growth kinetics, control the size/shape of the crystals, passivate surface states, and provide colloidal stability through favorable interactions with the solvent. However, the dynamicity comes at the expense of the stability of the QD suspension. Here, we show that ligands can be permanently locked on the QD surface by a thin layer of an inert metal oxide which forms within the ligand shell, over the headgroup. By interrogating the surface chemistry with different spectroscopic methods, we prove the ligand locking on the QD surface. As a result, an exceptional stability of the coated QD inks is achieved in a wide concentration range, even in the presence of chemically competing surface ligands in solution. We anticipate that this critical breakthrough will benefit different areas related to colloidal QDs, spanning from single-particle studies to displays and solar cells and biological applications. Furthermore, the same chemistry could be easily translated to surface treatments of bulk materials and thin films.

Water molecules bonded to the carboxylate groups at the inorganic-organic interface of an inorganic nanocrystal coated with alkanoate ligands

High-quality colloidal nanocrystals are commonly synthesized in hydrocarbon solvents with alkanoates as the most common organic ligand. Water molecules with an approximately equal number of surface alkanoate ligands are identified at the inorganic–organic interface for all types of colloidal nanocrystals studied, and investigated quantitatively using CdSe nanocrystals as the model system. Carboxylate ligands are coordinated to the surface metal ions and the first monolayer of water molecules is found to bond to the carboxylate groups of alkanoate ligands through hydrogen bonds. Additional monolayer(s) of water molecules can further be adsorbed through hydrogen bonds to the first monolayer of water molecules. The nearly ideal environment for hydrogen bonding at the inorganic–organic interface of alkanoate-coated nanocrystals helps to rapidly and stably enrich the interface-bonded water molecules, most of which are difficult to remove through vacuum treatment, thermal annealing and chemical drying. The water-enriched structure of the inorganic–organic interface of high-quality colloidal nanocrystals must be taken into account in order to understand the synthesis, processing and properties of these novel materials.

Large-area patterning of full-color quantum dot arrays beyond 1000 pixels per inch by selective electrophoretic deposition

Colloidal quantum dot (QD) emitters show great promise in the development of next-generation displays. Although various solution-processed techniques have been developed for nanomaterials, high-resolution and uniform patterning technology amicable to manufacturing is still missing. Here, we present large-area, high-resolution, full-color QD patterning utilizing a selective electrophoretic deposition (SEPD) technique. This technique utilizes photolithography combined with SEPD to achieve uniform and fast fabrication, low-cost QD patterning in large-area beyond 1,000 pixels-per-inch. The QD patterns only deposited on selective electrodes with precisely controlled thickness in a large range, which could cater for various optoelectronic devices. The adjustable surface morphology, packing density and refractive index of QD films enable higher efficiency compared to conventional solution-processed methods. We further demonstrate the versatility of our approach to integrate various QDs into large-area arrays of full-color emitting pixels and QLEDs with good performance. The results suggest a manufacture-viable technology for commercialization of QD-based displays.

Colloidal quantum dots are promising for next-generation displays, yet the technology to realise high-resolution and uniform patterning is still scarce. Here, the authors report full-colour QD large area patterning by combining photolithography and selective electrophoretic deposition technique.

Imidazolium-modification enhances photocatalytic CO2 reduction on ZnSe quantum dots

Colloidal photocatalysts can utilize solar light for the conversion of CO₂ to carbon-based fuels, but controlling the product selectivity for CO₂ reduction remains challenging, in particular in aqueous solution. Here, we present an organic surface modification strategy to tune the product selectivity of colloidal ZnSe quantum dots (QDs) towards photocatalytic CO₂ reduction even in the absence of transition metal co-catalysts. Besides H₂, imidazolium-modified ZnSe QDs evolve up to 2.4 mmol_CO g_ZnSe ^-1 (TON_QD > 370) after 10 h of visible light irradiation (AM 1.5G, λ > 400 nm) in aqueous ascorbate solution with a CO-selectivity of up to 20%. This represents a four-fold increase in CO-formation yield and 13-fold increase in CO-selectivity compared to non-functionalized ZnSe QDs. The binding of the thiolated imidazolium ligand to the QD surface is characterized quantitatively using ¹H-NMR spectroscopy and isothermal titration calorimetry, revealing that a subset of 12 to 17 ligands interacts strongly with the QDs. Transient absorption spectroscopy reveals an influence of the ligand on the intrinsic charge carrier dynamics through passivating Zn surface sites. Density functional theory calculations indicate that the imidazolium capping ligand plays a key role in stabilizing the surface-bound *CO₂ ^- intermediate, increasing the yield and selectivity toward CO production. Overall, this work unveils a powerful tool of using organic capping ligands to modify the chemical environment on colloids, thus enabling control over the product selectivity within photocatalyzed CO₂ reduction.

Metal-Carbonyl-Functionalized CdSe Nanocrystals: Synthesis, Surface Redox, and Infrared Intensities

Characterizing the surfaces of colloidal semiconductor nanocrystals (NCs) remains a key challenge for understanding and controlling their physical properties and chemical behavior. For this reason, the development of new methods to study NC surfaces is of great interest. In this paper, we report the use of (Me₃Si)₂Fe(CO)₄ and Et₃SiCo(CO)₄ as reagents for functionalizing CdSe NC surfaces with organometallic metal tetracarbonyl fragments. This method avoids NC surface reduction and can achieve high metal carbonyl surface densities. Surface reduction or oxidation, as well as changes to the surface stoichiometry, was shown to shift the metal carbonyl CO stretching frequencies, making these surface-bound metal carbonyl fragments useful spectroscopic reporters of NC surface chemistry. Normal coordinate analysis was used on the metal carbonyl CO stretching vibrations to study the electronic influence of the CdSe NCs on the transition-metal center of the metal carbonyl fragments. These studies demonstrate the utility of organometallic spectroscopic reporters in studying the surface chemistry of NCs.

'Beneficial impurities' in colloidal synthesis of surfactant coated inorganic nanoparticles

Colloidal synthesis of nanoparticles (NP) has advanced tremendously over the past 25 years, with an increasing number of research papers introducing nanomaterials with a variety of compositions, shapes, sizes, and phases. Although much progress has been achieved, commonly used synthetic procedures often fail to reproduce results, and the fine details of the syntheses are often disregarded. Reproducibility issues in synthesis can be ascribed to the effects of impurities, trace amounts of chemical moieties which significantly affect the reaction products. Impurities in NP synthesis are rarely reported or regularly studied, despite their impact, deleterious, or beneficial. This topical review discusses several case studies of colloidal NP synthesis where the sources and the chemistry of impurities are highlighted, and their role is examined.

Thermodynamics of Composition Dependent Ligand Exchange on the Surfaces of Colloidal Indium Phosphide Quantum Dots

Quantum dot surfaces can have a substantial effect on their physical, chemical, and optoelectronic properties. When the chemistry that occurs at the surface of nanocrystals is studied, critical insights can be gained into the fundamental structural, thermodynamic, and optical properties of quantum dot materials providing a valuable guide for how to best adapt them for desired applications. Colloidal quantum dots are often terminated with organic ligands that consist of a long aliphatic chain and a head group that binds tightly to the nanocrystal surface. While extensive work has been done to understand how ligand head groups influence quantum dot properties, studies to unravel the influence of the organic ligand tail on ligands and surface reaction equilibria are incomplete. To further investigate the driving forces of quantum dot surface modification, a series of ligand exchange reactions with oleic acid were performed on indium phosphide quantum dots, initially terminated with straight-chain carboxylates of variable lengths. The reaction was monitored using isothermal titration calorimetry and ¹H NMR to determine the extent of each reaction and its associated thermodynamics. From these measurements, interligand interactions were observed to be dependent on the length of the straight-chain ligand. A modified Ising model was used to investigate the enthalpic and entropic effects contributing to these ligand exchanges and reveal that interligand interactions play a much larger role than previously thought. Additional experimentation with phosphonic acid ligand exchange reveals complexity in the reaction mechanism but further illustrates the significant impact of ligand tail group length on thermodynamics, even in cases where there is a large difference in head group binding energy.

Colloidal-ALD-Grown Core/Shell CdSe/CdS Nanoplatelets as Seen by DNP Enhanced PASS-PIETA NMR Spectroscopy

Ligand exchange and CdS shell growth onto colloidal CdSe nanoplatelets (NPLs) using colloidal atomic layer deposition (c-ALD) were investigated by solid-state nuclear magnetic resonance (NMR) experiments, in particular, dynamic nuclear polarization (DNP) enhanced phase adjusted spinning sidebands-phase incremented echo-train acquisition (PASS-PIETA). The improved sensitivity and resolution of DNP enhanced PASS-PIETA permits the identification and study of the core, shell, and surface species of CdSe and CdSe/CdS core/shell NPLs heterostructures at all stages of c-ALD. The cadmium chemical shielding was found to be proportionally dependent on the number and nature of coordinating chalcogen-based ligands. DFT calculations permitted the separation of the the ^111/113Cd chemical shielding into its different components, revealing that the varying strength of paramagnetic and spin-orbit shielding contributions are responsible for the chemical shielding trend of cadmium chalcogenides. Overall, this study points to the roughening and increased chemical disorder at the surface during the shell growth process, which is not readily captured by the conventional characterization tools such as electron microscopy.

Beneficial Impurities and Phase Control in Colloidal Synthesis of Tin Monoselenide

The effect of impurities in colloidal synthesis of SnSe in oleylamine surfactant was investigated. Specifically, it was found that impurities such as water, hydrochloric acid, and carbon dioxide stabilize the recently discovered cubic phase of tin monoselenide, π-SnSe. We describe the reaction that releases HCl to the reaction medium through reaction of SnCl₂ with moisture and its subsequent reaction with oleylamine, transforming it from neutral to charged surfactant. A similar path occurs in the case of CO₂, which reacts with oleylamine to give charged oleylammonium-oleylcarbamate molecular pairs. By exposing the reaction to controlled concentrations of "beneficial contaminants", hitherto a major source of irreproducibility in this synthesis, we demonstrate phase and shape control from π-SnSe cubes to α-SnSe rods.

The Trouble with ODE: Polymerization during Nanocrystal Synthesis

1-Octadecene is a widely used solvent for high-temperature nanocrystal synthesis (120-320 °C). Here, we show that 1-octadecene spontaneously polymerizes under these conditions, and the resulting poly(1-octadecene) has a comparable solubility and size to nanocrystals stabilized by hydrophobic ligands. Typical purification procedures (precipitation/redispersion cycles or size exclusion chromatography) fail to separate the poly(1-octadecene) impurity from the nanocrystal product. To avoid formation of poly(1-octadecene), we replace 1-octadecene with saturated, aliphatic solvents. Alternatively, the nanocrystals' native ligands are exchanged for polar ligands, leading to significant solubility differences between nanocrystals and poly(1-octadecene), therefore allowing isolation of pure nanocrystals, free from polymer impurities. These results will help design superior syntheses and improve nanocrystal purity, an important factor in many applications.

Identification of Facet-Dependent Coordination Structures of Carboxylate Ligands on CdSe Nanocrystals

Aliphatic carboxylates are the most common class of surface ligands to stabilize colloidal nanocrystals. The widely used approach to identify the coordination modes between surface cationic sites and carboxylate ligands is based on the empirical infrared (IR) spectroscopic assignment, which is often ambiguous and thus hampers the practical control of surface structures. In this report, multiple techniques based on nuclear magnetic resonance (NMR) and IR spectra are applied to distinguish the different coordination structures in a series of zinc-blende CdSe nanocrystals with unique facet structures, including nanoplatelets dominated with {100} basal planes, hexahedrons with only three types of low-index facets (i.e., {100}, {110}, and {111}), and spheroidal dots without well-defined facets. Interpretation and assignment of NMR and IR signals were assisted by density functional theory (DFT) calculations. In addition to the identification of facet-sensitive bonding modes, the present methods also allow a nondestructive quantification of mixed ligands.

Energetics at the Surface: Direct Optical Mapping of Core and Surface Electronic Structure in CdSe Quantum Dots Using Broadband Electronic Sum Frequency Generation Microspectroscopy

Understanding and controlling the electronic structure of nanomaterials is the key to tailoring their use in a wide range of practical applications. Despite this need, many important electronic states are invisible to conventional optical measurements and are typically identified indirectly based on their inferred impact on luminescence properties. This is especially common and important in the study of nanomaterial surfaces and their associated defects. Surface trap states play a crucial role in photophysical processes yet remain remarkably poorly understood. Here we demonstrate for the first time that broadband electronic sum frequency generation (eSFG) microspectroscopy can directly map the optically bright and dark states of nanoparticles, including the elusive below gap states. This new approach is applied to model cadmium selenide (CdSe) quantum dots (QDs), where the energies of surface trap states have eluded direct optical characterization for decades. Our eSFG measurements show clear signatures of electronic transitions both above the band gap, which we assign to previously reported one- and two-photon transitions associated with the CdSe core, as well as broad spectral signatures below the band gap that are attributed to surface states. In addition to the core states, this analysis reveals two distinct distributions of below gap states, providing the first direct optical measurement of both shallow and deep surface states on this system. Finally, chemical modification of the surfaces via oxidation results in the relative increase in the signals originating from the surface states. Overall, our eSFG experiments provide an avenue to directly map the entirety of the QD core and surface electronic structure, which is expected to open up opportunities to study how these materials are grown in situ and how surface states can be controlled to tune functionality.

The role of alkylamine in the stabilization of CuO nanoparticles as a determinant of the Al/CuO redox reaction

We report on a new strategy to synthesize Al/CuO nanothermites from commercial Al and ultra-small chemically synthesized CuO nanoparticles coated with alkylamine ligands. These usual ligands stabilize the CuO nanoparticles and prevent them from aggregating, with the goal to enhance the interfacial contact between Al and CuO particles. Using a variety of characterization techniques, including microscopy, spectroscopy, mass spectrometry and calorimetry (ATG/DSC), the structural and chemical evolution of CuO nanoparticles stabilized with alkylamine ligands is analyzed upon heating. This enables us to describe the main decomposition processes taking place on the CuO surface at low temperature (<500 °C): the ligands fragment into organic species accompanied with H2O and CO2 release, which promotes CuO reduction into Cu2O and further Cu. We quantitatively discuss these chemical processes highlighting for the first time the crucial importance of the synthesis conditions that control the chemical purity of the organic ligands (octylamine molecules and derivatives such as carbamate and ammonium ions) in the nanothermite performance. From these findings, an effective method to overcome the ligand-induced CuO degradation at low temperature is proposed and the Al/CuO nanothermite reaction is analyzed, in terms of onset temperature and energy released. We produce original structures composed of aluminium nanoparticles embedded in CuO grainy matrices exhibiting an onset temperature ∼200 °C below the usual Al/CuO onset temperatures, having specific combustion profiles depending on the synthesis conditions, while preserving the total amount of energy released.

Spontaneous Formation of CdSe Photoluminescent Nanotubes with Visible-Light Photocatalytic Performance

Two-dimensional (2D) colloidal CdSe nanocrystals (NCs) with precise atomic-scale thickness have attracted intensive attention in recent years due to their optical properties and quantum confinement effects originating from their particular band structure. Here, we report a solution-based and template-free protocol to synthesize CdSe nanotubes (NTs) having 3-6 walls, each of which has 3.5 molecular monolayers. Their crystal structure is zincblende, with Cd-terminated {100} planes at the top and bottom surfaces of each wall, which are passivated by short-chain acetate ligands. After verifying the prominent role of the acetate ligand for NT synthesis, we elucidated the formation mechanism of these NTs. It starts by heterogeneous nucleation of 2D plateletlike nanoseeds from the amorphous Cd precursor matrix, followed by the growth via lateral and angular attachment of nanoplatelet building blocks into curved nanosheets, eventually resulting in NTs with sharp absorption and photoluminescence peak at around 460 nm. Moreover, the NTs show remarkable visible-light photocatalytic activity, as demonstrated by the reduction of the reddish Rhodamine B into its leuco form with a conversion rate of 92% in 1 min.

Electron-Promoted X-Type Ligand Displacement at CdSe Quantum Dot Surfaces

Quantum dot surfaces are redox active and are known to influence the electronic properties of nanocrystals, yet the molecular-level changes in surface chemistry that occur upon addition of charge are not well understood. In this paper, we report a systematic study monitoring changes in surface coordination chemistry in 3.4 nm CdSe quantum dots upon remote chemical doping by the radical anion reductant sodium naphthalenide (Na[C₁₀H₈]). These studies reveal a new mechanism for charge-balancing the added electrons that localize on surface states through loss of up to ca. 5% of the native anionic carboxylate ligands, as quantified through a combination of UV-vis absorption, ¹H NMR, and FTIR spectroscopies. A new method for distinguishing between reduction of surface metal and chalcogenide ions by monitoring ligand loss and optical changes upon doping is introduced. This work emphasizes the importance of studying changes in surface chemistry with remote chemical doping and is more broadly contextualized within the redox reactivity of the QD surface.

Finding and Fixing Traps in II-VI and III-V Colloidal Quantum Dots: The Importance of Z-Type Ligand Passivation

Energy levels in the band gap arising from surface states can dominate the optical and electronic properties of semiconductor nanocrystal quantum dots (QDs). Recent theoretical work has predicted that such trap states in II-VI and III-V QDs arise only from two-coordinated anions on the QD surface, offering the hypothesis that Lewis acid (Z-type) ligands should be able to completely passivate these anionic trap states. In this work, we provide experimental support for this hypothesis by demonstrating that Z-type ligation is the primary cause of PL QY increase when passivating undercoordinated CdTe QDs with various metal salts. Optimized treatments with InCl₃ or CdCl₂ afford a near-unity (>90%) photoluminescence quantum yield (PL QY), whereas other metal halogen or carboxylate salts provide a smaller increase in PL QY as a result of weaker binding or steric repulsion. The addition of non-Lewis acidic ligands (amines, alkylammonium chlorides) systematically gives a much smaller but non-negligible increase in the PL QY. We discuss possible reasons for this result, which points toward a more complex and dynamic QD surface. Finally we show that Z-type metal halide ligand treatments also lead to a strong increase in the PL QY of CdSe, CdS, and InP QDs and can increase the efficiency of sintered CdTe solar cells. These results show that surface anions are the dominant source of trap states in II-VI and III-V QDs and that passivation with Lewis acidic Z-type ligands is a general strategy to fix those traps. Our work also provides a method to tune the PL QY of QD samples from nearly zero up to near-unity values, without the need to grow epitaxial shells.

Spectroelectrochemical Signatures of Surface Trap Passivation on CdTe Nanocrystals

The photoluminescence (PL) quantum yield of semiconductor nanocrystals (NCs) is hampered by in-gap trap states due to dangling orbitals on the surface of the nanocrystals. While crucial for the rational design of nanocrystals, the understanding of the exact origin of trap states remains limited. Here, we treat CdTe nanocrystal films with different metal chloride salts and we study the effect on their optical properties with in situ spectroelectrochemistry, recording both changes in absorption and photoluminescence. For untreated CdTe NC films we observe a strong increase in the PL intensity as the Fermi-level is raised electrochemically and trap states in the bandgap become occupied with electrons. Upon passivation of these in-gap states we observe an increase in the steady state PL and, for the best treatments, we observe that the PL no longer depends on the position of the Fermi level in the band gap, demonstrating the effective removal of trap states. The most effective treatment is obtained for Z-type passivation with CdCl₂, for which the steady state PL increased by a factor 40 and the PL intensity became nearly unaffected by the applied potential. X-ray Photoelectron Spectroscopy measurements show that treatment with ZnCl₂ mainly leads to X-type passivation with chloride ions, which increased the PL intensity by a factor four and made the PL less susceptible to modulation by applying a potential with respect to unpassivated nanocrystal films. We elucidate the spectroelectrochemical signatures of trap states within the bandgap and conclude that undercoordinated Te at the surface constitutes the largest contribution to in-gap trap states, but that other surface states that likely originate on Cd atoms should also be considered.

Finding and Fixing Traps in II-VI and III-V Colloidal Quantum Dots: The Importance of Z-Type Ligand Passivation

Energy levels in the band gap arising from surface states can dominate the optical and electronic properties of semiconductor nanocrystal quantum dots (QDs). Recent theoretical work has predicted that such trap states in II–VI and III–V QDs arise only from two-coordinated anions on the QD surface, offering the hypothesis that Lewis acid (Z-type) ligands should be able to completely passivate these anionic trap states. In this work, we provide experimental support for this hypothesis by demonstrating that Z-type ligation is the primary cause of PL QY increase when passivating undercoordinated CdTe QDs with various metal salts. Optimized treatments with InCl₃ or CdCl₂ afford a near-unity (>90%) photoluminescence quantum yield (PL QY), whereas other metal halogen or carboxylate salts provide a smaller increase in PL QY as a result of weaker binding or steric repulsion. The addition of non-Lewis acidic ligands (amines, alkylammonium chlorides) systematically gives a much smaller but non-negligible increase in the PL QY. We discuss possible reasons for this result, which points toward a more complex and dynamic QD surface. Finally we show that Z-type metal halide ligand treatments also lead to a strong increase in the PL QY of CdSe, CdS, and InP QDs and can increase the efficiency of sintered CdTe solar cells. These results show that surface anions are the dominant source of trap states in II–VI and III–V QDs and that passivation with Lewis acidic Z-type ligands is a general strategy to fix those traps. Our work also provides a method to tune the PL QY of QD samples from nearly zero up to near-unity values, without the need to grow epitaxial shells.

Resolving the Core and the Surface of CdSe Quantum Dots and Nanoplatelets Using Dynamic Nuclear Polarization Enhanced PASS-PIETA NMR Spectroscopy

Understanding the surface of semiconductor nanocrystals (NCs) prepared using colloidal methods is a long-standing goal of paramount importance for all their potential optoelectronic applications, which remains unsolved largely because of the lack of site-specific physical techniques. Here, we show that multidimensional ¹¹³Cd dynamic nuclear polarization (DNP) enhanced NMR spectroscopy allows the resolution of signals originating from different atomic and magnetic surroundings in the NC cores and at the surfaces. This enables the determination of the structural perfection, and differentiation between the surface and core atoms in all major forms of size- and shape-engineered CdSe NCs: irregularly faceted quantum dots (QDs) and atomically flat nanoplatelets, including both dominant polymorphs (zinc-blende and wurtzite) and their epitaxial nanoheterostructures (CdSe/CdS core/shell quantum dots and CdSe/CdS core/crown nanoplatelets), as well as magic-sized CdSe clusters. Assignments of the NMR signals to specific crystal facets of oleate-terminated ZB structured CdSe NCs are proposed. Significantly, we discover far greater atomistic complexity of the surface structure and the species distribution in wurtzite as compared to zinc-blende CdSe QDs, despite an apparently identical optical quality of both QD polymorphs.

Insights into the Structural Complexity of Colloidal CdSe Nanocrystal Surfaces: Correlating the Efficiency of Nonradiative Excited-State Processes to Specific Defects

II-VI colloidal semiconductor nanocrystals (NCs), such as CdSe NCs, are often plagued by efficient nonradiative recombination processes that severely limit their use in energy-conversion schemes. While these processes are now well-known to occur at the surface, a full understanding of the exact nature of surface defects and of their role in deactivating the excited states of NCs has yet to be established, which is partly due to challenges associated with the direct probing of the complex and dynamic surface of colloidal NCs. Here, we report a detailed study of the surface of cadmium-rich zinc-blende CdSe NCs. The surfaces of these cadmium-rich species are characterized by the presence of cadmium carboxylate complexes (CdX₂) that act as Lewis acid (Z-type) ligands that passivate undercoordinated selenide surface species. The systematic displacement of CdX₂ from the surface by N,N,N',N'-tetramethylethylene-1,2-diamine (TMEDA) has been studied using a combination of ¹H NMR and photoluminescence spectroscopies. We demonstrate the existence of two independent surface sites that differ strikingly in the binding affinity for CdX₂ and that are under dynamic equilibrium with each other. A model involving coupled dual equilibria allows a full characterization of the thermodynamics of surface binding (free energy, as well as enthalpic and entropic terms), showing that entropic contributions are responsible for the difference between the two surface sites. Importantly, we demonstrate that cadmium vacancies only lead to important photoluminescence quenching when created on one of the two sites, allowing a complete picture of the surface composition to be drawn where each site is assigned to specific NC facet locale, with CdX₂ binding affinity and nonradiative recombination efficiencies that differ by up to two orders of magnitude.

Direct optical lithography of functional inorganic nanomaterials

Photolithography is an important manufacturing process that relies on using photoresists, typically polymer formulations, that change solubility when illuminated with ultraviolet light. Here, we introduce a general chemical approach for photoresist-free, direct optical lithography of functional inorganic nanomaterials. The patterned materials can be metals, semiconductors, oxides, magnetic, or rare earth compositions. No organic impurities are present in the patterned layers, which helps achieve good electronic and optical properties. The conductivity, carrier mobility, dielectric, and luminescence properties of optically patterned layers are on par with the properties of state-of-the-art solution-processed materials. The ability to directly pattern all-inorganic layers by using a light exposure dose comparable with that of organic photoresists provides an alternate route for thin-film device manufacturing.

Biomimetic Inspired Core-Canopy Quantum Dots: Ions Trapped in Voids Induce Kinetic Fluorescence Switching

Closely packed hollow spheres connected through pillars to a CdSe quantum dot (QD) core produce channels through which ions navigate. This particular structure is well represented by [CdSe@CarbOPH(O)]@Cl/[N(Caprylyl)₃ Me₁ ] indicating that in the channels between the canopy made by the carboranyl spheres (carboranylphosphinate, CarbOPH(O)) and the CdSe core exist chloride anions. Due to the close packing, the spheres produce openings. These are converted into gates because [N(Caprylyl)₃ Me₁ ] acts as a plug. The [CdSe@CarbOPH(O)]@Cl/assembly is negatively charged because the Cd positive charges are outnumbered by the negative charges due to the Se, the phosphinic acid and, very importantly, the trapped chloride anions, and this negative load is compensated by the cationic surfactant. Here, it is shown that this synergism produces an unprecedented phenomenon, namely, kinetic fluorescence switching. It is observed that the material shines brightly then loses its brightness and, upon the application of kinetic energy, shines back to the maximum power. This process continues for an extended period of time, up to half a year, at least. This new type of architecture in QDs is named as core-canopy QDs. In this case, this study demonstrates one property, the kinetic fluorescence switching, as a consequence of the trapping of Cl^- in the QDs channels, but other properties can be envisaged with the judicious choice of the anions or even the pillar connecting the hollow sphere with the ground.