Catalytic N2 Reduction to Silylamines and Thermodynamics of N2 Binding at Square Planar Fe

Synthesis of heteroleptic bis-phosphine bis-NHC iron (0) complexes: a strategy to enhance small molecule activation

We report the synthesis of heteroleptic iron complexes supported by both a bis-phosphine ligand (depe) and a bis-NHC ligand. The mixed ligand sets provide access to iron (0) adducts of N2 and CO that are highly activated, in comparison to homoleptic (i.e. Fe(depe)2L) variants. Computational and experimental studies revealed the mixed ligand set distorts the geometric and electronic structure to yield an unusually basic iron. Although protonation occurred at Fe, silylation of the Fe(0)N2 complex afforded a highly activated silyldiazenido [FeNNSiMe3]+ complex.

Dinitrogen silylation catalyzed by silylene cobalt(I) and silylene iron(I) chlorides

In this contribution, Co(PMe3)3Cl (1), bis(silylene) cobalt chlorides Co(LSi:)2(PMe3)2Cl (LSi: = {PhC(NtBu)2}SiCl (2); {p-CH3C6H4C(NtBu)2}SiCl (3); and {p-tBuC6H4C(NtBu)2}SiCl (4)) and bis(silylene) iron chlorides Fe(LSi:)2(PMe3)2Cl (LSi: = {PhC(NtBu)2}SiCl (5); {p-CH3C6H4C(NtBu)2}SiCl (6); {p-tBuC6H4C(NtBu)2}SiCl (7) and Fe(PMe3)2Cl2 (8)) were synthesized to study the effects of different metals and silylene ligands on the catalytic activity of complexes 1-8 in dinitrogen silylation reaction. The experimental results indicate that there is no substantial difference in catalytic activity between the phosphine cobalt complex 1 and the silylene cobalt chlorides 2-4 although the cobalt silylene complex 2 has slightly better catalytic activity than complexes 1, 3 and 4 in the dinitrogen silylation. Silylene iron complexes 5-7 are more active than the phosphine iron complex 8. Among the three silylene iron(I) chlorides 5-7, complex 5 is the most effective catalyst for dinitrogen silylation and 402 equiv. of N(SiMe3)3 could be obtained per Fe atom. In the dinitrogen silylation reaction catalyzed by iron complexes, the introduction of the silylene ligand made the silylene iron complexes 5-7 more active than the phosphine iron complex 8. In addition, iron chlorides 5-8 are more effective catalysts than cobalt(I) chlorides 1-4 for the dinitrogen silylation reaction. Complexes 3, 4, 6 and 7 were new complexes, and their molecular structures were determined by single crystal X-ray diffraction analysis.

Theoretical Investigations of Hydrolysis Mechanisms of N(SiMe3)3

Tris(trimethylsilyl)amine (N(SiMe3)3) is one of the most important intermediate products in the indirect synthesis of ammonia (NH3) from nitrogen (N2), which could be hydrolyzed to NH3 under mild conditions. Herein, the hydrolysis mechanism of N(SiMe3)3 has been systematically investigated using density functional theory (DFT) with explicit combined implicit water models. Under neutral conditions, the active barrier of the hydrolysis of N(SiMe3)3 is 17.6 kcal mol-1 in water solvent. The attacking of proton to N center and OH group to the Si atom from water is decoupled for the stabilization of OH group by solvent water molecules, which lower the hydrolysis energy barriers. Furthermore, under acid conditions, N(SiMe3)3 is easily coordinated with proton to form [NH(SiMe3)3]+, and the energy barrier of the hydrolysis reaction could be reduced to 11.5 kcal mol-1 of the first stage, making it being promoted according to the chemical equilibrium. Thus, the results provide an explanation for the possible mechanism of the quantitative conversion of N(SiMe3)3 to NH3 under mild conditions. The decoupled hydrolysis mechanism may play important role in other hydrolysis processes.

Reversible open-closed conformational switching of nano-size metalloporphyrin dimers triggered by light and temperature

The current work demonstrates the reversible control of substantial molecular motion in 'nano-sized' molecules, where two structural isomers can 'open' and 'close' their cavities in response to light or heat. The isomers differ widely in their photophysical properties, including colour, polarity, two-photon absorption and π-conjugation, and can easily be separated through column chromatography and thus have wide applicability.

A novel phosphate with CoII square planar coordination, BaCo0.5Fe(PO4)2: structural and magnetic features

A novel phosphate containing barium, cobalt, and iron was synthesized in single-crystal and polycrystalline forms. Single crystal-based X-ray measurements revealed that it crystallizes in the monoclinic system with the P21/c space group. The structure is made up of linkages between FeO6 octahedra, CoO4 square planar units, CoO5 square pyramidal units, and PO4 tetrahedra through edges and/or vertices. The interconnection of these polyhedra leads to a three-dimensional framework with tunnels along the a-axis where the Ba2+ cations are located. The polycrystalline form was prepared via the sol-gel method and its XRD pattern was refined by the Le Bail method. Morphological and elemental mapping analyses of this phosphate were performed by scanning electron microscopy. In addition, infrared and Raman spectroscopy provided more insights into chemical bonding. The magnetic behavior was antiferromagnetic below TN ∼ 20 K. Optical measurements revealed a direct bandgap with an energy Eg of 2.83 eV.

Synthesis of Bis(silylene) Iron Chlorides and Their Catalytic Activity for Dinitrogen Silylation

In this study, three tetracoordinated bis(silylene) iron(II) chlorides, namely, [SiCHRSi]FeCl2 (1) (R = H), (2) (R = CH3), and (3) (R = Ph), were synthesized through the reactions of the three different bis(silylene) ligands [LSiCHRSiL] (L = PhC(NtBu)2, L1 (R = H), L2 (R = CH3), L3 (R = Ph)) with FeCl2·(THF)1.5 in THF. The bis(silylene) Fe complexes 1-3 could be used as effective catalysts for dinitrogen silylation, with complex 3 demonstrating the highest turnover number (TON) of 746 equiv among the three complexes. The catalytic mechanism was explored, revealing the involvement of the pentacoordinated bis(dinitrogen) iron(0) complexes [SiCHRSi]Fe(N2)2(THF), (4)-(6), as the active catalysts in the dinitrogen silylation reaction. Additionally, the cyclic silylene compound 10 was obtained from the reaction of L1 with KC8. Single-crystal X-ray diffraction analyses confirmed the molecular structures of complexes 1-3 and 10 in the solid state.

Terminal N2 Dissociation in [(PNN)Fe(N2 )]2 (μ-N2 ) Leads to Local Spin-State Changes and Augmented Bridging N2 Activation

Nitrogen fixation at iron centres is a fundamental catalytic step for N₂ utilisation, relevant to biological (nitrogenase) and industrial (Haber-Bosch) processes. This step is coupled with important electronic structure changes which are currently poorly understood. We show here for the first time that terminal dinitrogen dissociation from iron complexes that coordinate N₂ in a terminal and bridging fashion leaves the Fe-N₂ -Fe unit intact but significantly enhances the degree of N₂ activation (Δν≈180 cm^-1 , Raman spectroscopy) through charge redistribution. The transformation proceeds with local spin state change at the iron centre (S= 1 / 2 ${{ 1/2 }}$ →S=³ /₂ ). Further dissociation of the bridging N₂ can be induced under thermolytic conditions, triggering a disproportionation reaction, from which the tetrahedral (PNN)₂ Fe could be isolated. This work shows that dinitrogen activation can be induced in the absence of external chemical stimuli such as reducing agents or Lewis acids.

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as "P₂N₂" ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P^R₂N^R'₂)₂]²⁺ complexes are electrocatalysts for both the oxidation and production of H₂. Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P^R₂N^R'₂)₂]²⁺ complexes for the oxidation and production of H₂, catalysts with diphosphine ligands containing pendant amines have also been demonstrated for several metals for many different reactions, both in solution and immobilized on surfaces. The impact of pendant amines in catalyst design continues to expand.

Synthesis and Reactivity of Manganese Complexes Bearing Anionic PNP- and PCP-Type Pincer Ligands toward Nitrogen Fixation

A series of manganese complexes bearing an anionic pyrrole-based PNP-type pincer ligand and an anionic benzene-based PCP-type pincer ligand is synthesized and characterized. The reactivity of these complexes toward ammonia formation and silylamine formation from dinitrogen under mild conditions is evaluated to produce only stoichiometric amounts of ammonia and silylamine, probably because the manganese pincer complexes are unstable under reducing conditions.

Synthesis and Reactivity of Cobalt-Dinitrogen Complexes Bearing Anionic PCP-Type Pincer Ligands toward Catalytic Silylamine Formation from Dinitrogen

A series of cobalt(I)-dinitrogen complexes bearing anionic 4-substituted benzene-based PCP-type pincer ligands are synthesized and characterized. These complexes work as highly efficient catalysts for the formation of silylamine from dinitrogen under ambient reaction conditions to produce up to 371 equiv of silylamine based on the cobalt atom of the catalyst.

Synthesis of silyl iron dinitrogen complexes for activation of dihydrogen and catalytic silylation of dinitrogen

Three novel iron dinitrogen hydrides, [FeH(ⁱPr-PSi^MeP)(N₂)(PMe₃)] (1), [FeH(ⁱPr-PSi^PhP)(N₂)(PMe₃)] (2), and [FeH(ⁱPr-PSi^Ph)(N₂)(PMe₃)] (3), supported by a silyl ligand are synthesized for the first time by changing the electronic effect and steric hindrance of the ligands through the reaction of ligands L1-L3 with Fe(PMe₃)₄ in a nitrogen atmosphere. The ligands containing an electron-donating group with large steric hindrance on the phosphorus atom are beneficial for the formation of dinitrogen complexes. A penta-coordinate iron hydride [FeH(ⁱPr-PSi^Ph)(PMe₃)₂] (4) was formed through the reaction of ligand L3 with Fe(PMe₃)₄ in an argon atmosphere under the same conditions. The reactions between complexes 1-3 with an atmospheric pressure of dihydrogen gas resulted in Fe(II) dihydrides, [(ⁱPr-PSi^Me(μ-H)P)Fe(H)₂(PMe₃)] (5), [(ⁱPr-PSi^Ph(μ-H)P)Fe(H)₂(PMe₃)] (6) and [(iPr-PSi^Ph(μ-H))Fe(H)₂(PMe₃)₂] (7), with an η²-(Si-H) coordination. The isolation of dihydrides 5-7 demonstrates the ability of the dinitrogen complexes 1-3 to realize the activation of dihydrogen under ambient temperature and pressure. The molecular structures of complexes 1-7 were elucidated by single crystal X-ray diffraction analysis. The iron dinitrogen hydrides 1-3 are effective catalysts for the silylation of dinitrogen under ambient conditions and among them 3 is the best catalyst.

Fixation of Dinitrogen at an Asymmetric Binuclear Titanium Complex

A new type of dititanium dinitrogen complex supported by a triphenolamine (TPA) ligand is reported. Analysis by single-crystal X-ray diffraction and Raman and NMR spectroscopy reveals different coordination geometries for the two titanium centers. Hence, coordination of TPA and a nitrogen ligand results in trigonal-bipyramidal geometry, while an octahedral titanium center is obtained upon additional coordination of an ethoxide generated upon C-O bond cleavage in a diethyl ether solvent molecule. The titanium complex successfully generates ammonia in the presence of an excess amount of PCy₃HI and KC₈ in 154% yield (per titanium atom). A titanium complex with a bulkier TPA does not form a dinitrogen complex, and mononuclear titanium dinitrogen complexes were not accessible, presumably because of the high tendency of early transition metals to form binuclear dinitrogen complexes.

Catalytic Reduction of N2 to Borylamine at a Molybdenum Complex

Catalytic formation of borylamines from atmospheric N₂ is achieved for the first time using a series of homogenous (triphosphine)Mo complexes. Stepwise functionalization of the (triphosphine)Mo-nitrido complex with chloroborane led to the synthesis of the imido complex. Electrochemical characterization of the (PPP)Mo-nitrido and (PPP)Mo-borylimido complexes showed that the latter is much more easily reduced.

Ammonia Formation Catalyzed by a Dinitrogen-Bridged Dirhenium Complex Bearing PNP-Pincer Ligands under Mild Reaction Conditions*

A series of rhenium complexes bearing a pyridine-based PNP-type pincer ligand are synthesized from rhenium phosphine complexes as precursors. A dinitrogen-bridged dirhenium complex bearing the PNP-type pincer ligands catalytically converts dinitrogen into ammonia during the reaction with KC₈ as a reductant and [HPCy₃ ]BAr^F ₄ (Cy=cyclohexyl, Ar^F =3,5-(CF₃ )₂ C₆ H₃ ) as a proton source at -78 °C to afford 8.4 equiv of ammonia based on the rhenium atom of the catalyst. The rhenium-dinitrogen complex also catalyzes silylation of dinitrogen in the reaction with KC₈ as a reductant and Me₃ SiCl as a silylating reagent under ambient reaction conditions to afford 11.7 equiv of tris(trimethylsilyl)amine based on the rhenium atom of the catalyst. These results demonstrate the first successful example of catalytic nitrogen fixation under mild reaction conditions using rhenium-dinitrogen complexes as catalysts.

Predicting Dinitrogen Activation via Transition-Metal-Involved [4+2] Cycloaddition Reaction

As the strongest triple bond in nature, the N≡N triple bond activation has always been a challenging project in chemistry. On the other hand, since the award of the Nobel Prize in Chemistry in 1950, the Diels-Alder reaction has served as a powerful and widely applied tool in the synthesis of natural products and new materials. However, the application of the Diels-Alder reaction to dinitrogen activation remains less developed. Here we first demonstrate that a transition-metal-involved [4+2] Diels-Alder cycloaddition reaction could be used to activate dinitrogen without an additional reductant by density functional theory calculations. Further study reveals that such a dinitrogen activation by 1-metalla-1,3-dienes screened out from a series of transition metal complexes (38 species) according to the effects of metal center, ligand, and substituents can become favorable both thermodynamically (with an exergonicity of 28.2 kcal mol^-1 ) and kinetically (with an activation energy as low as 13.8 kcal mol^-1 ). Our findings highlight an important application of the Diels-Alder reaction in dinitrogen activation, inviting experimental chemists' verification.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes

Dinitrogen (N2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N2 functionalization reactions following these strategies.

Synthesis and Structure of Iron (II) Complexes of Functionalized 1,5-Diaza-3,7-Diphosphacyclooctanes

In order to synthesize new iron (II) complexes of 1,5-diaza-3,7-diphosphacyclooctanes with a wider variety of the substituents on ligands heteroatoms (including functionalized ones, namely, pyridyl groups) and co-ligands, it was found that these ligands with relatively small phenyl, benzyl, and pyridin-2-yl substituents on phosphorus atoms in acetonitrile formed bis-P,P-chelate cis-complexes [L₂Fe(CH₃CN)₂]²⁺ (BF₄)₂⁻, whereas P-mesityl-substituted ligand formed only monoligand P,P-complex [LFe(CH₃CN)₄]²⁺ (BF₄)₂⁻. 3,7-dibenzyl-1,5-di(1′-(R)-phenylethyl)-1,5-diaza-3,7-diphosphacyclooctane reacted with hexahydrate of iron (II) tetrafluoroborate in acetone to give an unusual bis-ligand cationic complex of the composition [L₂Fe(BF₄)]⁺ BF₄⁻, where two fluorine atoms of the tetrafluoroborate unit occupied two pseudo-equatorial positions at roughly octahedral iron ion, according to X-ray diffraction data. 1,5-diaza-3,7-diphosphacyclooctanes replaced tetrahydrofurane and one of the carbonyl ligands of cyclopentadienyldicarbonyl(tetrahydrofuran)iron (II) tetrafluoroborate to form heteroligand complexes [CpFeL(CO)]⁺BF₄⁻. The structural studies in the solid phase and in solutions showed that diazadiphosphacyclooctane ligands of all complexes adopted chair-boat conformations so that their nitrogen atoms were in close proximity to the central iron ion. The redox properties of the obtained complexes were performed by the cyclic voltammetry method.

Coupling dinitrogen and hydrocarbons through aryl migration

A persistent challenge in chemistry is to activate abundant, yet inert molecules such as hydrocarbons and atmospheric N₂. In particular, forming C–N bonds from N₂ typically requires a reactive organic precursor¹, which limits the ability to design catalytic cycles. Here, we report an diketiminate-supported iron system that is able to sequentially activate benzene and N₂ to form aniline derivatives. The key to this new coupling reaction is the partial silylation of a reduced iron-N₂ complex, which is followed by migratory insertion of a benzene-derived phenyl group to the nitrogen. Further reduction releases the nitrogen products, and the resulting iron species can re-enter the cyclic pathway. Using a mixture of sodium powder, crown ether, and trimethylsilyl bromide, an easily prepared diketiminate iron bromide complex² can mediate the one-pot conversion of several petroleum-derived compounds into the corresponding silylated aniline derivatives using N₂ as the nitrogen source. Numerous compounds along the cyclic pathway have been isolated and crystallographically characterized; their reactivity outlines the mechanism including the hydrocarbon activation step and the N₂ functionalization step. This strategy incorporates nitrogen atoms from N₂ directly into abundant hydrocarbons.

Examining the Generality of Metal-Ligand Cooperativity Across a Series of First-Row Transition Metals: Capture, Bond Activation, and Stabilization

We outline the generality and requirements for cooperative N2H4 capture, N-N bond scission, and amido stabilization across a series of first-row transition metal complexes bearing a pyridine(dipyrazole) ligand. This ligand contains a pair of flexibly tethered trialkylborane Lewis acids that enable hydrazine capture and M-NH2 stabilization. While the Lewis acids are required to bind N2H4, the identity of the metal dictates whether N-N bond scission can occur. The redox properties of the M(II) bis(amidoborane) series of complexes were investigated and reveal that ligand-based events prevail; oxidation results in the generation of a transiently formed aminyl radical, while reduction occurs at the redox-active pyridine(dipyrazole) ligand.

Evaluating Metal Ion Identity on Catalytic Silylation of Dinitrogen Using a Series of Trimetallic Complexes

We report catalytic silylation of dinitrogen to tris(trimethylsilyl)amine by a series of trinuclear first row transition metal complexes (M = Cr, Mn, Fe, Co, Ni) housed in our tris(β-diketiminate) cyclophane (L ^3- ). Yields are expectedly dependent on metal ion type ranging from 14 to 199 equiv NH₄ ⁺/complex after protonolysis for the Mn to Co congeners, respectively. For the series of complexes, the number of turnovers trend observed is Co > Fe > Cr > Ni > Mn, consistent with prior reports of greater efficacy of Co over Fe in other ligand systems for this reaction.

Catalytic reduction of dinitrogen to tris(trimethylsilyl)amine using rhodium complexes with a pyrrole-based PNP-type pincer ligand

Rhodium complexes bearing an anionic pyrrole-based PNP-type pincer ligand are synthesised and found to work as effective catalysts for the transformation of molecular dinitrogen into tris(trimethylsilyl)amine under mild reaction conditions. This is the first successful example of rhodium-catalysed dinitrogen reduction under mild reaction conditions.

Thermodynamic and kinetic studies of H2 and N2 binding to bimetallic nickel-group 13 complexes and neutron structure of a Ni(η2-H2) adduct

Understanding H2 binding and activation is important in the context of designing transition metal catalysts for many processes, including hydrogenation and the interconversion of H2 with protons and electrons. This work reports the first thermodynamic and kinetic H2 binding studies for an isostructural series of first-row metal complexes: NiML, where M = Al (1), Ga (2), and In (3), and L = [N(o-(NCH2PiPr2)C6H4)3]3-. Thermodynamic free energies (ΔG°) and free energies of activation (ΔG ‡) for binding equilibria were obtained via variable-temperature 31P NMR studies and lineshape analysis. The supporting metal exerts a large influence on the thermodynamic favorability of both H2 and N2 binding to Ni, with ΔG° values for H2 binding found to span nearly the entire range of previous reports. The non-classical H2 adduct, (η2-H2)NiInL (3-H2), was structurally characterized by single-crystal neutron diffraction-the first such study for a Ni(η2-H2) complex or any d10 M(η2-H2) complex. UV-Vis studies and TD-DFT calculations identified specific electronic structure perturbations of the supporting metal which poise NiML complexes for small-molecule binding. ETS-NOCV calculations indicate that H2 binding primarily occurs via H-H σ-donation to the Ni 4p z -based LUMO, which is proposed to become energetically accessible as the Ni(0)→M(iii) dative interaction increases for the larger M(iii) ions. Linear free-energy relationships are discussed, with the activation barrier for H2 binding (ΔG ‡) found to decrease proportionally for more thermodynamically favorable equilibria. The ΔG° values for H2 and N2 binding to NiML complexes were also found to be more exergonic for the larger M(iii) ions.

Reductive Silylation Using a Bis-silylated Diaza-2,5-cyclohexadiene

1,4-Bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadiene, 1, was tested as a reagent for the reductive silylation of various unsaturated functionalities, including N-heterocycles, quinones, and other redox-active moieties in addition to deoxygenation of main group oxides. Whereas most reactions tested are thermodynamically favorable, based on DFT calculations, a few do not occur, perhaps giving limited insight on the mechanism of this very attractive reductive process. Of note, reductive silylation reactions show a strong solvent dependence where a polar solvent facilitates conversions.

Conversion of dinitrogen to tris(trimethylsilyl)amine catalyzed by titanium triamido-amine complexes

By using a triaryl-Tren ligated titanium dinitrogen complex, K2[{(Xy-N3N)Ti}2(μ2-N2)] (3), prepared by two-electron reduction of [TiCl(Xy-N3N)] (1-Cl) under N2 atmosphere, catalytic fixation of molecular nitrogen to form tris(trimethylsilyl)amine was achieved under ambient conditions with a turnover number (TON) of up to 16.5 per titanium atom.

Evaluation of attractive interactions in the second coordination sphere of iron complexes containing pendant amines

The ability of different ligands to attract a pendant amine is studied in a series of iron complexes.

Reversible coordination of N2 and H2 to a homoleptic S = 1/2 Fe(i) diphosphine complex in solution and the solid state

The synthesis and characterisation of the S = 1/2 Fe(i) complex [Fe(depe)2]+[BArF4]- ([1]+[BArF4]-), and the facile reversible binding of N2 and H2 in both solution and the solid state to form the adducts [1·N2]+ and [1·H2]+, are reported. Coordination of N2 in THF is thermodynamically favourable under ambient conditions (1 atm; ΔG 298 = -4.9(1) kcal mol-1), while heterogenous binding is more favourable for H2 than N2 by a factor of ∼300. [1·H2]+[BArF4]- represents a rare example of a well-defined, open-shell, non-classical dihydrogen complex, as corroborated by ESR spectroscopy. The rapid exchange between N2 and H2 coordination under ambient conditions is unique for a paramagnetic Fe complex.

Enhanced Activation of Coordinated Dinitrogen with p-Block Lewis Acids

This Concept article highlights recent research on Lewis acid adducts of dinitrogen complexes, including our contributions. After a reminder of the early works, it is demonstrated that such kind of species offers a new platform for dinitrogen functionalization as well as valuable models for the understanding of elementary steps of (bio)catalytic cycles. When possible, parallels regarding this mode of activation from the orbital point of view are drawn between the different systems discussed herein.

Fe-Catalyzed Conversion of N2 to N(SiMe3)3 via an Fe-Hydrazido Resting State

The catalytic conversion of N₂ to N(SiMe₃)₃ by homogeneous transition metal compounds is a rapidly developing field, yet few mechanistic details have been experimentally elucidated for 3 d element catalysts. Herein we show that Fe(PP)₂(N₂) (PP = R₂PCH₂CH₂PR₂; R = Me, 1^Me; R = Et, 1^Et) are highly effective for the catalytic production of N(SiMe₃)₃ from N₂ (using KC₈/Me₃SiCl), with the yields being the highest reported to date for Fe-based catalysts. We propose that N₂ fixation proceeds via electrophilic N_β silylation and 1e^- reduction to form unstable Fe^I(NN-SiMe₃) intermediates, which disproportionate to 1^Me/Et and hydrazido Fe^II[N-N(SiMe₃)₂] species (3^Me/Et); the latter act as resting states on the catalytic cycle. Subsequent 2e^- reduction of 3^Me/Et leads to N-N scission and formation of [N(SiMe₃)₂]^- and putative anionic Fe imido products. These mechanistic results are supported by both experiment and DFT calculations.

Catalytic Silylation of Dinitrogen by a Family of Triiron Complexes

A series of triiron complexes supported by a tris(β-diketiminate)cyclophane (L ^3- ) catalyze the reduction of dinitrogen to tris(trimethylsilyl)amine using KC₈ and Me₃SiCl. Employing Fe₃Br₃ L affords 83 ± 7 equiv. NH₄ ⁺/complex after protonolysis, which is a 50% yield based on reducing equivalents. The series of triiron compounds tested evidences the subtle effects of ancillary donors, including halides, hydrides, sulfides, and carbonyl ligands, and metal oxidation state on N(SiMe₃)₃ yield, and highlight Fe₃(μ₃-N)L as a common species in product mixtures. These results suggest that ancillary ligands can be abstracted with Lewis acids under reducing conditions.