Intensity-Dependent Photoresponse of Biphotochromic Molecule Composed of a Negative and a Positive Photochromic Unit

Multifunctional scaffolds for bone repair following age-related biological decline: Promising prospects for smart biomaterial-driven technologies

The repair of large bone defects due to trauma, disease, and infection can be exceptionally challenging in the elderly. Despite best clinical practice, bone regeneration within contemporary, surgically implanted synthetic scaffolds is often problematic, inconsistent, and insufficient where additional osteobiological support is required to restore bone. Emergent smart multifunctional biomaterials may drive important and dynamic cellular crosstalk that directly targets, signals, stimulates, and promotes an innate bone repair response following age-related biological decline and when in the presence of disease or infection. However, their role remains largely undetermined. By highlighting their mechanism/s and mode/s of action, this review spotlights smart technologies that favorably align in their conceivable ability to directly target and enhance bone repair and thus are highly promising for future discovery for use in the elderly. The four degrees of interactive scaffold smartness are presented, with a focus on bioactive, bioresponsive, and the yet-to-be-developed autonomous scaffold activity. Further, cell- and biomolecular-assisted approaches were excluded, allowing for contemporary examination of the capabilities, demands, vision, and future requisites of next-generation biomaterial-induced technologies only. Data strongly supports that smart scaffolds hold significant promise in the promotion of bone repair in patients with a reduced osteobiological response. Importantly, many techniques have yet to be tested in preclinical models of aging. Thus, greater clarity on their proficiency to counteract the many unresolved challenges within the scope of aging bone is highly warranted and is arguably the next frontier in the field. This review demonstrates that the use of multifunctional smart synthetic scaffolds with an engineered strategy to circumvent the biological insufficiencies associated with aging bone is a viable route for achieving next-generation therapeutic success in the elderly population.

Mechanism of charge accumulation in potassium poly(heptazine imide)

Dark photocatalysis is the ability of a photocatalyst to accumulate photocarriers during light irradiation and consume them for redox reactions under dark conditions. This phenomenon of photocatalysts storing photocarriers is known as charge accumulation. Dark photocatalysts can mitigate fluctuations in photocatalytic reaction efficiency in response to fluctuating solar irradiation. Potassium poly(heptazine imide) (K-PHI) has attracted considerable attention due to its high photocatalytic efficiency and ability to undergo dark photocatalysis. However, the detailed mechanism of charge accumulation in K-PHI remains unclear because photochromism, potassium ion desorption, and charge accumulation occur simultaneously triggered by light irradiation, limiting the comprehensive understanding of this mechanism. To elucidate the charge accumulation mechanism in K-PHI, highly oriented K-PHI thin films were prepared. Then, their fundamental physical properties and optical response of their electrical properties were investigated. We succeeded in separately observing photochromism, potassium ion desorption, and charge accumulation induced by light irradiation on K-PHI and proposed a comprehensive model to explain these phenomena. This study not only provides insights into the unique physical phenomena exhibited by K-PHI but also contributes to the development of solar energy-storage materials in the future.

A Nonlinear Photochromic Reaction Based on Sensitizer-Free Triplet-Triplet Annihilation in a Perylene-Substituted Rhodamine Spirolactam

Nonlinear photochromic reactions that work with weak incoherent light are important for molecular operations with high spatial resolution and multiple photofunctions based on single molecules. However, nonlinear photochromic compounds generally require complex molecular design, restricting accessibility in various fields. Herein, we report nonlinear photochromic properties in a perylene-substituted rhodamine spirolactam derivative (Rh-Pe), which is synthesized from rhodamine B in facile procedures. Direct excitation of Rh-Pe produces the triplet excited state via the charge-transfer (CT) state. The triplet excited state causes triplet-triplet annihilation to bring the generation of the intensely colored ring-open form with nonlinear behavior. Furthermore, green- and red-light-induced photochromism was achieved in Rh-Pe using triplet sensitizers, although Rh-Pe can be directly excited only by ultraviolet and blue light. Our findings are expected to contribute to the development of photofunctional materials showing nonlinear behavior and low-energy light responsivity.

Glass Disorder Modulated Luminescence in Zero-Dimensional Antimony-Chloride Coplanar Dimers for Optical Anti-counterfeiting

Zero-dimensional metal halides have received wide attention due to their structural diversity, strong quantum confinement, and associated excellent photoluminescence properties. A reversible and tunable luminescence would be desirable for applications such as anti-counterfeiting, information encryption, and artificial intelligence. Yet, these materials are underexplored, with little known about their luminescence tuning mechanisms. Here we report a pyramidal coplanar dimer, (TBA)Sb2Cl7 (TBA = tetrabutylammonium), showing broadband emission wavelength tuning (585-650 nm) by simple thermal treatment. We attribute the broad color change to structural disorder induced by varying the heat treatment temperatures. Increasing the heating temperature transitions the material from long-range ordered crystalline phase to highly disordered glassy phase. The latter exhibits stronger electron-phonon coupling, enhancing the self-trapped exciton emission efficiency. The work provides a new material platform for manifold optical anti-counterfeiting applications and sheds light on the emission color tuning mechanisms for further design of stimuli-responsive materials.

Flexible Organic Chiral Crystals with Thermal and Excitation Modulation of the Emission for Information Transmission, Writing, and Storage

Organic single crystals quickly emerge as dense yet light and nearly defect-free media for emissive elements. Integration of functionalities and control over the emissive properties is currently being explored for a wide range of these materials to benchmark their performance against organic emissive materials diluted in powders or films. Here, we report mechanically flexible emissive chiral organic crystals capable of an unprecedented combination of fast, reversible, and low-fatigue responses. UV-excited single crystals of both enantiomers of the material, 4-chloro-2-(((1-phenylidene)imino)methyl)phenol, exhibit a drastic yet reversible change in the emission color from green to orange-yellow within a second and can be cycled at least 2000 times. The photoresponse was found to depend strongly on the excitation intensity and temperature. Combining chirality, mechanical compliance, rapid emission switching, multiple responses, and writability by UV light, this material provides a unique and versatile platform for developing organic crystal-based materials for on-demand signal transfer, information storage, and cryptography.

From Visible to Near-Infrared Light-Triggered Photochromism: Negative Photochromism

Photochromic compounds, whose key molecular properties can be effectively modulated by light irradiation, have attracted significant attention for their potential applications in various research fields. The restriction of photoisomerization coloration induced by ultraviolet light limits their applications in the biomedical field and some other fields. Negative photochromism, wherein a relatively stable colored isomer transforms to a colorless metastable isomer under low-energy light irradiation, offers advantages in applications within materials science and life science. This review provides a summary of negatively photochromic compounds based on different molecular skeletons. Their corresponding design strategies and photochromic properties are presented to provide practical guidelines for future investigations. Negatively photochromic compounds can effectively expand the range of photochromic switches for future applications, offering unique properties such as responsiveness to visible to near-infrared light.

Tuning the Photochromism of Spiropyran in Functionalized Nanoporous Silica Nanoparticles for Dynamic Anticounterfeiting Applications

Here, we report a novel invisible ink with different decay times based on thin films with different molar ratios of spiropyran (SP)/Si, which allows the encryption of messages over time. Nanoporous silica has been found to be an excellent substrate to improve the solid photochromism of spiropyran, but the hydroxyl groups of silica have a serious effect on fade speeds. The density of silanol groups in silica has an influence on the switching behavior of spiropyran molecules, as they stabilize the amphiphilic merocyanine isomers and thus slow down the fading process from the open to the closed form. Here, we investigate the solid photochromic behavior of spiropyran by sol-gel modification of the silanol groups and explore its potential application in UV printing and dynamic anticounterfeiting. To extend its applications, spiropyran is embedded in organically modified thin films prepared by the sol-gel method. Notably, by using the different decay times of thin films with different SP/Si molar ratios, time-dependent information encryption can be realized. It provides an initial "false" code, which does not display the required information, and only after a given time will the encrypted data appear.

Bridged-Imidazole Dimer Exhibiting Three-State Negative Photochromism with a Single Photochromic Unit

Photochromic molecules that can exhibit multiple states of photochromism in a single photochromic unit are considered more attractive than traditional bistable photochromic molecules because they can offer more versatility and control in photoresponsive systems. We have synthesized a negative photochromic 1-(1-naphthyl)pyrenyl-bridged imidazole dimer (NPy-ImD) that has three different isomers: a colorless isomer, 6MR, a blue-colored isomer, 5MR-B, and a red-colored isomer, 5MR-R. NPy-ImD can interconvert between these isomers via a short-lived transient biradical, BR, upon photoirradiation. 5MR-R is the most stable isomer, and the energy levels of 6MR, 5MR-B, and BR are relatively close to each other. The colored isomers 5MR-R and 5MR-B are photochemically isomerized to 6MR via the short-lived BR upon irradiation with blue light and red light, respectively. The absorption bands of 5MR-R and 5MR-B are well separated by more than 150 nm, with a small overlap, which means they can be selectively excited with different light sources, visible light for 5MR-R and NIR light for 5MR-B. The colorless isomer 6MR is formed from the short-lived BR through a kinetically controlled reaction. 6MR and 5MR-B can then be converted to the more stable isomer 5MR-R through a thermodynamically controlled reaction, which is facilitated by the thermally accessible intermediate, BR. Notably, 5MR-R photoisomerizes to 6MR when irradiated with CW-UV light, whereas it photoisomerizes to 5MR-B by a two-photon process when irradiated with nanosecond UV laser pulses.

Molecular Cage with Dual Outputs of Photochromism and Luminescence Both in Solution and the Solid State

The rational design of stimuli-responsive materials requires a deep understanding of the structure-activity relationship. Herein, we proposed an intramolecular conformation-locking strategy─incorporating flexible tetraphenylethylene (TPE) luminogens into the rigid scaffold of a molecular cage─to produce a molecular photoswitch with dual outputs of luminescence and photochromism in solution and in the solid states at once. The molecular cage scaffold, which restricts the intramolecular rotations of the TPE moiety, not only helps to preserve the luminescence of TPE in a dilute solution but facilitates the reversible photochromism on account of the intramolecular cyclization/cycloreversion reactions. Furthermore, we demonstrate assorted applications of this multiresponsive molecular cage, e.g., photo-switchable patterning, anticounterfeiting, and selective vapochromism sensing.

Stepping Out of the Blue: From Visible to Near-IR Triggered Photoswitches

Light offers unique opportunities for controlling the activity of materials and biosystems with high spatiotemporal resolution. Molecular photoswitches are chromophores that undergo reversible isomerization between different states upon irradiation with light, allowing a convenient means to control their influence over the system of interest. However, a significant limitation of classical photoswitches is the requirement to initiate the switching in one or both directions using deleterious UV light with poor tissue penetration. Red-shifted photoswitches are hence in high demand and have attracted keen recent research interest. In this Review, we highlight recent progress towards the development of visible- and NIR-activated photoswitches characterized by distinct photochromic reaction mechanisms. We hope to inspire further endeavors in this field, allowing the full potential of these tools in biotechnology and materials chemistry applications to be realized.

Stepwise Photochromism of Bis(Imidazole Dimer) Bridged by a Sulfur Atom

We report the development of the stepwise photochromic imidazole dimer bridged by a sulfur atom. The one-photon absorption leads to the generation of the colored biradical species, which rapidly recombines to the initial imidazole dimer following first-order reaction kinetics. The further photochemical reaction of the biradical species produces the long-lived colored species, which shows intermolecular dimerization.

Excitation wavelength- and intensity-dependent stepwise two-photon-induced photochromic reaction

The photochromic molecules showing wavelength-selective or light intensity-dependent photoresponse are receiving increased attention in recent years. Although a photoswitch with a single chromophore can control the ON and OFF states of a function, that consisting of multi-chromophores would be useful for the specific control in complex systems. Herein, we designed stepwise two-photon induced photochromic molecules (PABI-PIC and PABI-PIC2) consisting of two different photochromic units (PABI and PIC). One-photon absorption reaction in the UV light region of PABI-PIC generates the short-lived transient biradical (BR) that absorbs an additional photon in the visible and UV light region in a stepwise manner to produce the two-photon photochemical product, the quinoidal species (Quinoid). The photochromic properties of these transient species are completely different in color and fading speed. In addition, PABI-PIC also shows the excitation wavelength-dependent photochromism because the excited states of the PABI and PIC units are electronically orthogonal. Therefore, the stepwise photochromic properties of PABI-PIC are easily controlled depending on the excitation light intensity and wavelength. These molecular designs are important for the development of advanced photoresponsive materials.

Recent advances in low-power-threshold nonlinear photochromic materials

Incoherent nonlinear photophysical and photochemical processes based on stepwise two-photon absorption (2PA) processes have been recently used in materials science owing to their unique photoresponses beyond one-photon processes and lower power thresholds to induce the processes than those of coherent nonlinear optical processes. Among them, nonlinear photochromic materials have received considerable attention because they exhibit unconventional photoresponses compared with other incoherent nonlinear processes such as low-power-threshold nonlinear photoresponses with unimolecular systems, gated photochemical reactions and oxygen-insensitive nonlinear photoresponses. Nonlinear photochromic materials are important not only for colorimetric materials, but also for emergent materials that can enrich the next-generation society such as dynamic holographic materials, which are promising for three-dimensional displays. In this tutorial review, we introduce low-power-threshold nonlinear photochromic materials using stepwise 2PA processes. First, we explain the fundamental concepts of photochemistry as well as photochromic reactions. We attempt to provide an intuitive understanding of incoherent nonlinear optical processes using these fundamental concepts. Then, we introduce several recent examples and potential applications of nonlinear photochromic materials. This tutorial review is important for understanding the scientific progress related to these fields and provides a simple unified picture of the incoherent nonlinear optical properties of different types of photofunctional materials.

Green and far-red-light induced electron injection from perylene bisimide to wide bandgap semiconductor nanocrystals with stepwise two-photon absorption process

Stepwise two-photon absorption (2PA) processes are becoming an important technique because it can achieve high reductive photochemical reactions with visible and near infrared light and intensity-gated high spatiotemporal selectivity with much lower power thresholds than those of the simultaneous 2PA. However, excited states generated by stepwise 2PA (higher excited states and excited states of transient species) are so short-lived that the efficiency for the stepwise 2PA induced photochemical reactions is usually quite low, which limits the versatility for this technique. Here, we demonstrated that the electron of the higher excited state can be efficiently extracted in a nanohybrid of organic molecules and wide bandgap semiconductor nanocrystals (NCs). Using perylene bisimide (PBI)-coordinated CdS NCs as a model compound, we demonstrated that the electron of the higher excited state of PBI generated by stepwise 2PA can be extracted to the conduction band of CdS NCs with a quantum yield of ∼0.5-0.7. Moreover, the extracted electron survives at the conduction band of CdS NCs over nanoseconds, which is more than hundred times longer than the lifetime of the S2 state of PBI. This method can be applied to other organic molecules and larger wide bandgap semiconductors, and therefore, will expand the versatility for the photochemical reactions utilizing the short-lived excited states.

An AIE-active dual fluorescent switch with negative photochromism for information display and encryption

A negative photochromic molecular switch with AIE and two-color fluorescence conversion properties was synthesized.

Natural Polyphenol-Vanadium Oxide Nanozymes for Synergistic Chemodynamic/Photothermal Therapy

The selection of suitable nanozymes with easy synthesis, tumor specificity, multifunction, and high therapeutics is meaningful for tumor therapy. Herein, a facile one-step assembly approach was employed to successfully prepare a novel kind of natural polyphenol tannic acid (TA) hybrid with mixed valence vanadium oxide nanosheets (TA@VO_x NSs). In this system, VO_x is assembled with TA through metal-phenolic coordination interaction to both introduce superior peroxidase-like activity and high near infrared (NIR) absorption owing to partial reduction of vanadium from V⁵⁺ to V⁴⁺ . The presence of mixed valence vanadium oxide in TA@VO_x NSs is proved to be the key for the catalytic reaction of hydrogen peroxide (H₂ O₂ ) to ^. OH, and the corresponding catalytic mechanism of H₂ O₂ by TA@VO_x NSs is proposed. Benefitting from such peroxidase-like activity of TA@VO_x NSs, the overproduced H₂ O₂ of the tumor microenvironment allows the realization of tumor-specific chemodynamic therapy (CDT). As a valid supplement to CDT, the NIR absorption enables TA@VO_x NSs to have NIR light-mediated conversion ability for photothermal therapy (PTT) of cancers. Furthermore, in vitro and in vivo experiments confirmed that TA@VO_x NSs can effectively inhibit the growth of tumors by synergistic CDT/PTT. These results offer a promising way to develop novel vanadium oxide-based nanozymes for enhanced synergistic tumor-specific treatment.

Enhancement of Negative Photochromic Properties of Naphthalene-Bridged Phenoxyl-Imidazolyl Radical Complex

Negative photochromism has increased attention as a light-switch for functional materials. A development of fast photochromic molecules has been also expected because a rapid thermal back reaction within a millisecond time scale is useful for real-time switching. Herein, we synthesized the derivatives of the naphthalene-bridged phenoxyl-imidazolyl radical complex (Np-PIC) showing the negative photochromism to demonstrate the efficient strategy to increase the visible light sensitivity and to control the thermal back reaction rates. The distances of the C-C bond of the transient 2,4'-isomer shows good agreement with the thermodynamic stability, leading to the control of the thermal back reaction rate. We revealed the cyclic voltammetry and the DFT calculations are efficient to predict the characters of the HOMO and LUMO. The introduction of the electron-withdrawing dicyanoquinodimethane group is efficient to induce the photochromic reaction with increased visible-light sensitivity by the expansion of the π-conjugation. The results will give an important insight for the future development of fast-responsive negative photochromic molecules.

Red or Near-Infrared Light Operating Negative Photochromism of a Binaphthyl-Bridged Imidazole Dimer

The development of red or near-infrared light (NIR) switchable photochromic molecules is required for an efficient utilization of sunlight and regulation of biological activities. While the photosensitization of photochromic molecules to red or NIR light has been achieved by a two-photon absorption process, the development of a molecule itself having sensitivity to red or NIR light has been now a challenging study. Herein, we developed an efficient molecular design for realizing red or NIR-light-responsive negative photochromism based on binaphthyl-bridged imidazole dimers. The introduction of electron-donating substituents shows the red shift of the absorption band at the visible-light region because of the contribution of a charge-transfer transition. Especially, the introduction of a di(4-methoxyphenyl)amino group (TPAOMe) and a perylenyl group largely shifts the absorption edge of the stable colored form to 900 nm. In addition, because the absorption band of one of the derivatives substituted with TPAOMe covers the whole visible-light region, the colored form shows a neutral gray color. Upon red (660 nm) or NIR-light (790 nm) irradiation, we observed the negative photochromic reaction from the stable colored form to the metastable colorless form. Therefore, the substituted binaphthyl-bridged imidazole dimers constitute the attractive photoswitches within a biological window.

Easily Prepared and Reusable Films for Fast-Response Rewritable Light Printing

Paper, for writing and printing, is consumed a lot in modern life. However, the production of conventional paper could cause many problems, such as deforestation and environmental pollution. Therefore, it is necessary and urgent to explore novel strategies to solve these problems. In this work, a polyoxometalate-doped gelatin film with high strength, excellent transparency, and fast photochromic properties is designed and prepared. The film can display different colors by using a variety of reagents, exhibiting its potential application as a paper medium. Its rapid photochromic properties allow complex high-resolution images to be displayed by UV light printing. It is found that the mechanical and photochromic properties could be regulated by the introduction of triethylene glycol, and the fading process could be controlled by changing the temperature and humidity. Moreover, it is rewritable, self-repairable, and recyclable, and can also achieve long-term preservation without fading. It is envisioned that the environmentally friendly films with low cost, ease of preparation, and recycling advantages have the potential to be an alternative to conventional paper for writing and printing.

Photo- and Electro-Driven Molecular Switching System of Aryl-Bridged Photochromic Radical Complexes

Fast photochromic molecules have received much interest in the potential application as a real-time switching trigger in material and biological chemistry. Pentaarylbiimidazole (PABI) and phenoxyl-imidazolyl radical complex (PIC) are one of the fast photochromic molecules based on imidazolyl radicals. Because the photochromic reaction of these fast photochromic molecules proceeds from the optically forbidden S₁ state, it is difficult to estimate the excitation energy to induce the photochromic reactions by spectroscopic techniques. In this study, we performed the electrochemical measurements for PABI and PIC to investigate the electronic properties and to determine the S₀-S₁ transition energies. In addition, we also revealed that the electrochemical reduction of PABI and PIC generates the radical anion which spontaneously shows the C-N bond breaking reaction to produce the radical species. The initial photochromic dimer is reproduced by the reversible oxidation of the anion species. This characteristic photochromic and electrochromic properties can be applicable to the photowritable electrochromic devices with high spatial resolution.

Visible light intensity dependent negative photochromism of a binaphthyl-bridged phenoxyl-imidazolyl radical complex

We herein report a novel biphotochromic molecule composed of two fast negative photochromic phenoxyl-imidazolyl radical complex units showing incident light intensity dependence of the photochemical reaction.

Structure-function relationships of donor-acceptor Stenhouse adduct photochromic switches

The first in-depth, systematic study of the photoswitching properties of Donor-Acceptor Stenhouse Adducts (DASAs) is reported. Barbituric acid derived DASAs functionalised with 14 different amines ranging from dimethylamine to 4-methoxy-N-methylaniline were structurally characterised in solution using 1H and 13C NMR spectroscopy and, in eight cases, in the solid state by single crystal X-ray diffraction. The distribution of coloured and colourless isomers in the dark, their photostationary states under irradiation, apparent thermal half-lives, and fatigue resistance are systematically compared. A simple kinetic model is used to characterise photoswitching behaviour and reveals that minor structural modifications can significantly improve the photoswitching properties of DASA photochromes. These modifications result in excellent photoswitching properties for '1st generation' DASAs in chloroform, including exceptional fatigue resistance, opening the door for these photochromic molecules to find widespread applications.

Hierarchically controllable photoreaction of a coordination polymer based on quaternized 1,2-bis(4'-pyridyl)ethylene

A multiply photoactive compound has been developed based on quaternized 1,2-bis(4'-pyridyl)ethylene, which exhibits a hierarchical photoreaction by controlling light intensity. Weak ultraviolet light can effectively promote the cycloaddition reaction with fluorescence enhancement, while stronger ultraviolet light can stimulate a complex response of cycloaddition and electron-transfer which shows turn-off luminescence and coloration. Photofacilitated bleaching of the colored products has been observed for the first time in the pyridinium family.

Stepwise photochromism of bisnaphthopyrans exhibiting an excitation intensity-dependent color change

The bisnaphthopyran derivatives composed of two naphthopyran units exhibit a nonlinear color change depending on the excitation light intensity.