Targeted Ligand-Exchange Chemistry on Cesium Lead Halide Perovskite Quantum Dots for High-Efficiency Photovoltaics

Tuning the Triplet State of Ligands on FAPbBr3 Quantum Dots toward Low-Threshold Distributed Feedback Lasers

Herein, the influence of ligand triplet energy on carrier transfer dynamics and optical gain behaviors of quantum dots (QDs) was investigated using FAPbBr3 QDs capped by phenylethylamine (PEA) and 2-(2-naphthyl)ethylamine (NEA) molecules. Through analysis of steady-state and transient spectroscopic data as well as the energy level structure of QD-ligand complexes, a very close triplet energy gap between QDs and NEA was demonstrated, which could act as an effective energy transfer channel between QDs and ligands. The setup of this energy-transfer channel greatly reduced the carrier density in QDs under high pump fluences, contributing to a lasing threshold as low as 6.1 μJ/cm2. The proposed ligand triplet regulation strategy provided new insights into carrier recombination dynamic control and may also be useful for other optoelectronic devices such as solar cells, light-emitting diodes, and photodetectors.

Application of advanced quantum dots in perovskite solar cells: synthesis, characterization, mechanism, and performance enhancement

Quantum dots have garnered significant interest in perovskite solar cells (PSCs) due to their stable chemical properties, high carrier mobility, and unique features such as multiple exciton generation and excellent optoelectronic characteristics resulting from quantum confinement effects. This review explores quantum dot properties and their applications in photoelectronic devices, including their synthesis and deposition processes. This sets the stage for discussing their diverse roles in the carrier transport, absorber, and interfacial layers of PSCs. We thoroughly examine advances in defect passivation, energy band alignment, perovskite crystallinity, device stability, and broader light absorption. In particular, novel approaches to enhance the photoelectric conversion efficiency (PCE) of quantum dot-enhanced perovskite solar cells are highlighted. Lastly, based on a comprehensive overview, we provide a forward-looking outlook on advanced quantum dot fabrication and its impact on enhancing the photovoltaic performance of solar cells. This review offers insights into fundamental mechanisms that endorse quantum dots for improved PSC performance, paving the way for further development of quantum dot-integrated PSCs.

Caesium-Iodide-Assisted Synthesis of High-Quality, Stable, and Robust Lead-Free Perovskite Quantum Dots

The poor morphology, and susceptibility to oxidation of tin-based perovskite quantum dots (TQDs) have posed significant challenges, limiting their application potential. This study presents a straightforward method for synthesizing high-quality CsSnI3-based perovskite quantum dots (TQDs) by incorporating a mixed Cs source of Cs2CO3 and CsI. The addition of CsI increased the I:Sn ratio while maintaining Sn:Cs, resulting in TQDs with smaller size and improved uniformity. X-ray photoelectron spectroscopy (XPS), and Nuclear magnetic resonance (NMR) analyses confirmed enhanced crystallinity, photoluminescence intensity, and antioxidation ability of CsI-TQDs. Remarkably, these TQDs exhibit exceptional stability, enduring over 1 h in air and more than 24 h before complete oxidation, surpassing the previously reported longest lifetime in air for TQDs with conventional oleic acid (OA) and oleylamine (OAm) ligands. Furthermore, these TQD films retain robustness after ligand exchange with methyl acetate (MeOAc) and formamidinium iodide (FAI), representing the first successful short-ligand exchange of TQDs and enabling further electronic device applications. These findings suggest that CsI in the Cs source plays a crucial role in facilitating the formation of surface complexes, regulating TQD growth and suppressing iodine vacancies.

Surface chemistry-engineered perovskite quantum dot photovoltaics

The discovery and synthesis of colloidal quantum dots (QDs) was awarded the Nobel Prize in Chemistry in 2023. Recently, the development of bulk metal halide perovskite semiconductors has generated intense interest in their corresponding perovskite QDs. QDs, more broadly known as nanocrystals, constitute a new class of materials that differ from both molecular and bulk materials. They have rapidly advanced to the forefront of optoelectronic applications owing to their unique size-, composition-, surface- and process-dependent optoelectronic properties. More importantly, their ultrahigh surface-area-to-volume ratio enables various surface chemistry engineering strategies to tune and optimize their optoelectronic properties. Finally, three-dimensional confined QDs, offering nearly perfect photoluminescent quantum yield, slow hot-carrier cooling time, especially their colloidal synthesis and processing using industrially friendly solvents, have revolutionized the fields of electronics, photonics, and optoelectronics. Particularly, in emerging perovskite QD-based PVs, the advancement of surface chemistry has boosted the record power conversion efficiency (PCE) to 19.1% within a five-year period, surpassing all other colloidal QD photovoltaics (PVs). Given the rapid enhancement of device performances, perovskite QD PVs have attracted significant attention. Further study of semiconducting perovskite QDs will lead to advanced surface structures, a deeper understanding of halide perovskites, and enhanced PCE. In this review article, we comprehensively summarize and discuss the emerging perovskite QD PVs, providing insights into the impact of surface chemical design on their electronic coupling, dispersibility, stability and defect passivation. The limitations of current perovskite QDs mainly arise from their "soft" ionic nature and dynamic surface equilibrium, which lead to difficulties in the large-scale synthesis of monodispersed perovskite QDs and conductive inks for high-throughput printing techniques. We present that the development of surface chemistry is becoming a platform for further improving PCE, aiming to reach the 20% milestone. Additionally, we discuss integrating artificial intelligence to facilitate the mass-production of perovskite QDs for large-area, low-cost PV technology, which could help address significant energy challenges.

Perovskite spin light-emitting diodes with simultaneously high electroluminescence dissymmetry and high external quantum efficiency

Realizing high electroluminescence dissymmetric factor and high external quantum efficiency at the same time is challenging in light-emitting diodes with direct circularly polarized emission. Here, we show that high electroluminescence dissymmetric factor and high external quantum efficiency can be simultaneously achieved in light-emitting diodes based on chiral perovskite quantum dots. Specifically, chiral perovskite quantum dots with chiral-induced spin selectivity can concurrently serve as localized radiative recombination centers of spin-polarized carriers for circularly polarized emission, thereby suppressing the relaxation of spins, Meanwhile, improving the chiral ligand exchange efficiency is found to synergistically promote their spin selectivity and optoelectronic properties so that chiroptoelectronic performance of resulting devices can be facilitated. Our device simultaneously exhibits high electroluminescence dissymmetric factor (R: 0.285 and S: 0.251) and high external quantum efficiency (R: 16.8% and S: 16%), demonstrating their potential in constructing high-performance chiral light sources.

Designing multiple charge carrier separation pathways in core-type near infrared colloidal nanocrystal for broadband photodetector

Near-infrared colloidal nanocrystals (NIR-CNCs) have been widely utilized in optoelectronic applications due to their exceptional optical properties and suitability for mass production. However, their practical application is often hindered by poor chemical stability and suboptimal electronic properties. In this work, four different surface ligand systems-insulating ligands, organic molecular linkers, inorganic molecular linkers, and matrix-type ligands-were systematically investigated to evaluate their effects on the transport and recombination behavior of NIR-CNCs via photoinduced carriers. While molecular linkers enhance transport behavior by improving electronic coupling, they tend to induce photoinduced charge carrier accumulation under AM1.5 illumination due to a high degree of Fermi-level pinning caused by unfavorable electronic structures. In contrast, the matrix-type band-like transport ligand significantly reduced dark current and hysteresis characteristics in CNCs, demonstrating superior performance. Impedance and capacitance analyses revealed that the matrix-type ligand, with its multiple carrier separation pathways, enhanced carrier transport through sub-states facilitated by amorphous MoS x and effectively passivated CNC trap states, thereby reducing the Fermi-level pinning effect. This approach dramatically suppressed hot carrier-induced trap state generation, minimized photoinduced recombination, and improved operational stability. Overall, this study presents a significant advancement in developing cost-efficient, chemically stable NIR optoelectronic devices with outstanding electronic properties.

A Brief Review of Perovskite Quantum Dot Solar Cells: Synthesis, Property and Defect Passivation

Perovskite quantum dot solar cells (PQDSCs), as the promising candidate for the next generation of solar cell, have garnered the significant attention over the past decades. However, the performance and stability of PQDSCs are highly dependent on the properties of interfaces between the perovskite quantum dots (PQDs) and the other layers in the device. This work provides a brief overview of PQDSCs, including the synthesis of PQDs, the characteristics and preparation methods of PQDs, the photoelectric properties as the light absorption layer and optimization methods for PQDSCs with high efficiency. Future directions and potential applications are also highlighted.

Electrostatic Harmonization for Superior Charge Extraction at Interface for Stable High-Efficiency FAPbI3 Quantum Dots Solar Cells

Organic-inorganic formamidinium lead triiodide (FAPbI3) hybrid perovskite quantum dots (QDs) have garnered considerable attention in the photovoltaic field due to their narrow bandgap, exceptional environmental stability, and prolonged carrier lifetime. Unfortunately, their insulating ligands and surface vacancy defects pose significant obstacles to efficient charge transfer across device interfaces. In this work, an electrostatic harmonization strategy at the interface using a donor-acceptor dipole molecular attachment to achieve enhanced charge separation capabilities on the QD surface is ventured. On the basis of theoretical study and experimental evaluation, it has gained a comprehensive understanding of dipole-induced electronic restructuring at the quantum dot interfaces. It reveals that 3-fluoro-4-iodopyridine as a dipole source with appropriate energy levels and a high dipole moment effectively fills surface iodine vacancies (VI-), leading to rapid separation of photoexcited charge carriers. Particularly enhanced hole mobility and hydrophobicity are achieved through strong electronegative effects of fluorine and iodine. Consequently, the FAPbI3 QD solar cells achieve a power conversion efficiency as high as 14.11% with exceptional long-term stability in ambient. These perceptions provide effective interface engineering means for the hybrid perovskite QDs to advance their potential in high-performance optoelectronic applications.

Synergistic Hybrid-Ligand Passivation of Perovskite Quantum Dots: Suppressing Reduced-Dimensionality and Enhancing Optoelectronic Performance

In terms of surface passivation for realizing efficient CsPbI3-perovskite quantum dot (CsPbI3-PQD)-based optoelectronic devices, phenethylammonium iodide (PEAI) is widely used during the ligand exchange. However, the PEA cation, due to its large ionic radius incompatible with the 3D perovskite framework, acts as an organic spacer within polycrystalline perovskites, leading to the formation of reduced dimensional perovskites (RDPs). Despite sharing the identical 3D perovskite framework, the influence of PEAI on the structure of CsPbI3-PQDs remains unexplored. Here, it is revealed that PEAI can induce the formation of high-n RDPs (n > 2) within the CsPbI3-PQD solids, but these high-n RDPs undergo an undesirable phase transition to low-n RDPs, leading to the structural and optical degradation of CsPbI3-PQDs. To address the PEAI-induced issue, we employ triphenylphosphine oxide (TPPO) as an ancillary ligand during the ligand exchange process. The incorporation of TPPO prevents H2O penetration and regulates the rapid diffusion of PEAI, suppressing the formation of low-n RDPs. Moreover, TPPO can passivate the uncoordinated Pb2+ sites, reducing the nonradiative recombination. This hybrid-ligand exchange strategy using both PEAI and TPPO enables realizing efficient and stable CsPbI3-PQD-based light-emitting diode (external quantum efficiency of 21.8%) and solar cell (power conversion efficiency of 15.3%) devices.

Surface Matrix-Mediated Cation Exchange of Perovskite Quantum Dots for Efficient Solar Cells

Cesium-formamidinium lead triiodide perovskite quantum dot (CsxFA1-xPbI3 PQD) is very promising for photovoltaic applications due to its good phase stability and outstanding optoelectronic properties. However, achieving the CsxFA1-xPbI3 PQDs with tunable compositions and robust surface matrix remains a challenge. Here, the surface matrix-mediated cation exchange of PQDs is proposed, in which a bi-functional molecule, tetrafluoroborate methylammonium (FABF4), is applied for the cation exchange and stabilizing surface matrix of PQDs. The results reveal that the FA+ of FABF4 molecules could exchange the Cs+ of CsPbI3 PQDs forming alloy CsxFA1-xPbI3 PQDs, allowing to tune the spectroscopies of PQDs. Meanwhile, the BF4 - of FABF4 molecules can effectively stabilize the surface lattice and substantially diminish the surface vacancies of PQDs, improving the phase stability and optoelectronic properties of PQDs. Consequently, CsxFA1-xPbI3 PQD solar cells deliver an efficiency of up to 17.49 %, which is the highest value of CsxFA1-xPbI3 PQD solar cells. This work provided important design principles for the composition and surface matrix regulation of PQDs for high-performance solar cells or other optoelectronic devices.

Cognitively Driven Autonomous Flow Chemistry for Producing On-Demand Perovskite Quantum Dots Via Advanced Closed-Loop Feedback Control

Recent developments in the synthesis of hybrid organic-inorganic halide perovskite quantum dots (HP-QDs) through compositional adjustments have highlighted their potential applications in the fields of photovoltaics and light sources due to their unique optoelectronic properties. However, traditional methods to fine-tune their composition involve repetitive, labor-intensive, and costly processes. Herein, the utilization of a continuous flow chemistry approach is developed, in combination with a Proportional-Integral (PI) feedback control system as an effective method for producing on-demand methylammonium lead bromoiodide (MAPbBrxI3-x) HP-QDs. The PI feedback control allows for real-time optimization of the flow rates of halide precursor solutions (halide PSs), enabling the precise tuning of the emission wavelength of HP-QDs. HP-QDs having an emission wavelength of 550 and 650 nm are synthesized through a blue-shifted and red-shifted algorithm, respectively, from any arbitrary reaction condition within 400 s. The iterative process through the PI feedback control produces the target HP-QDs with short rise time and low overshoot. The proposed automatic flow chemistry system integrated with a universal and accessible control algorithm of PI can generate the target HP-QDs with high accuracy, stability, and robustness, demonstrating a significant advancement in constructing an autonomous flow chemistry synthetic system.

Surface Doping to Suppress Iodine Ion Migration for Stable FAPbI3 Perovskite Quantum Dot Solar Cells

Formamidine lead iodide (FAPbI3) quantum dots (QDs) have attracted great attention as a new generation of photovoltaic material due to their long carrier diffusion length, benign ambient stability, and light-harvesting ability. However, its large surface area with inherent thermodynamic instability and highly defective ionic termination are still major obstacles to fabricating high-performance devices. Herein, a metallic ion dopant is developed to post-treat FAPbI3 QDs immediately after their fabrication by using a metal-glutamate salt solution. Both experimental and theoretical results show that alkaline (earth) metal ions (Mg2+, Na+, and K+) in their glutamate salt can not only successfully substitute insulating long-chain ligands to form thinner ligand shells but inhibit the formation of iodine vacancies on the surface of QDs. As a result, the glutamate-Mg based solar cell exhibits a champion efficiency of 13.48%, and the other two solar cells treated by glutamate alkaline metal salts (Na+ and K+) achieve photoelectrical conversion efficiencies of 13.26% and 11.88%, respectively, all of which are higher than of control cell with an efficiency of 11.58%. Therefore, this substantial progress provides intuitive cognition and guidance for the improvement of photoelectric performance and the commercial application of quantum dot solar cells.

PCBM Constructing Heterojunction for Efficient CsPbI3 Perovskite Quantum Dot Solar Cells

CsPbI3 perovskite quantum dots (PQDs) have emerged as promising photovoltaic materials for third-generation solar cells, owing to their superior optoelectronic properties. Nevertheless, the performance of CsPbI3 PQD solar cells is primarily hindered by low carrier extraction efficiency, largely due to the insulative ligands. In this study, we introduced a semiconductor molecule, [6,6]-phenyl C61 butyric acid methyl ester (PCBM), onto the surfaces of CsPbI3 PQDs as surface ligands to enhance photogenerated charge extraction. The results indicate that PCBM accelerates carrier separation in CsPbI3 PQDs by forming a type II heterojunction, and also modulates the energy level of CsPbI3 PQDs by altering surface dipole moments. Additionally, we established an energy-level gradient alignment in the PCBM/CsPbI3 PQD heterojunction absorber layer, which was found to effectively promote carrier extraction and reduce carrier recombination loss in PQD solar cells. Ultimately, the PQD solar cells incorporating this novel structure achieved a power conversion efficiency of 14.23%, a significant improvement compared to 12.69% achieved by solar cells with a traditional structure, thus demonstrating the strong potential of this approach for high-performance PQD solar cells.

Organometallic Compound Stabilizes All-Inorganic Tin-Based Perovskite Nanocrystals Against Antisolvent Post-Treatment

The isolation and purification of all-inorganic Sn-based perovskite nanocrystals (PNCs) remain troublesome, as common antisolvents accelerate the collapse of the optically active perovskite structure. Here, we mitigate such instabilities and endow strong resistance to antisolvent by incorporating the organometallic compound zinc diethyldithiocarbamate, Zn(DDTC)2, during the solution-based synthesis of all-inorganic CsSnI3 nanocrystals. Thiourea is shown to form through the thermal-driven conversion of Zn(DDTC)2 during synthesis, which binds to un-passivated Sn sites on the crystal surface and shields it from irreversible oxidation reactions. The CsSnI3 PNCs capped with thiourea show great stability after two purification cycles using methyl acetate, with negligible change in morphology, phase, and optical properties. Moreover, the modified PNCs are resistant to other commonly used antisolvents, like ethyl acetate, 1-pentanol, and isopropanol, offering a platform to explore all-inorganic Sn-based nanocrystalline thin films and optoelectronics.

Atomic Layer Deposition of ZnO on CsPbBr3 Perovskite Nanocrystals: Surface-Dependent Mechanistic Insights

In this study, we investigate the atomic layer deposition (ALD) process on all-inorganic CsPbBr3 perovskite nanocrystals (PNCs) to introduce an inorganic electron transport layer (ETL) in light-emitting diode (LED) devices. Two types of CsPbBr3 PNCs were synthesized with oleate (OA) and oleylammonium (OLA) ligands on the surface. We found that CsPbBr3 PNCs with Cs oleate surfaces experienced severe photoluminescence (PL) quenching after the ALD process, while those with oleylammonium bromide surfaces did not show any significant PL drop. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed that significant Pb metal formation and Ruddlesden-Popper planar faults, linked to uncoordinated Pb2+ ion defects, were generated in CsPbBr3 PNCs terminated with Cs oleate after ALD ZnO. Finally, we fabricated LEDs using PNCs with an ALD ZnO process to introduce inorganic ZnMgO nanoparticles as the ETL. The devices processed with ALD exhibited superior luminance and external quantum efficiency compared to those without the ALD process. This research provides crucial insights into the surface-dependent chemistry of PNCs and the surface-dependent performance of perovskite-based optoelectronic devices.

Hexadecylpyridinium bromides as a new capping agent for improving stability and luminescence of cesium lead bromide perovskites

Because of exception properties, inorganic halide perovskites are promising materials for numerous applications. The efficiency of these materials are evaluated based on their photoluminescence quantum yield, which is the key indicator and proportional to the stability of the perovskite. Hence, to limit the instability of the perovskites, addition of surfactant as ligand has been applied during synthesis of nanoparticle based inorganic perovskite CsPbBr3. As far as we know, only a few researchers have studied the impact of hexadecylpyridinium bromide (CPB) on the stability of the crystal structure of CsPbBr3. In this work, we present a novel approach for lead halide perovskites by incorporating CPB to primarily maintain the perovskite's crystal structure, and later on to enhance the stability of CsPbBr3 NPs while boosting its photoluminescence quantum yield (PLQY). Results showed that CPB enhanced the thermal stability and boosted the PLQY to 90 %. Moreover, CPB had proven its efficiency as a capping agent preventing the exchange of anion between bromide and iodide ions in presence of lead iodide.

Band Engineering of Perovskite Quantum Dot Solids for High-Performance Solar Cells

CsPbI3 perovskite quantum dot (PQD) shows high potential for next-generation photovoltaics due to their tunable surface chemistry, good solution-processability and unique photophysical properties. However, the remained long-chain ligand attached to the PQD surface significantly impedes the charge carrier transport within the PQD solids, thereby predominantly influencing the charge extraction of PQD solar cells (PQDSCs). Herein, a ligand-induced energy level modulation is reported for band engineering of PQD solids to improve the charge extraction of PQDSCs. Detailed theoretical calculations and systemic experimental studies are performed to comprehensively understand the photophysical properties of the PQD solids dominated by the surface ligands of PQDs. The results reveal that 4-nitrobenzenethiol and 4-methoxybenzenethiol molecules with different dipole moments can firmly anchor to the PQD surface through the thiol group to modulate the energy levels of PQDs, and a gradient band structure within the PQD solid is subsequently realized. Consequently, the band-engineered PQDSC delivers an efficiency of up to 16.44%, which is one of the highest efficiencies of CsPbI3 PQDSCs. This work provides a feasible avenue for the band engineering of PQD solids by tuning the surface chemistry of PQDs for high-performing solar cells or other optoelectronic devices.

Surface ligand manipulation enables ∼15% efficient MAPbI3 perovskite quantum dot solar cells

We reported a surface ligand manipulation strategy for hybrid MAPbI3 perovskite quantum dots (PeQDs) using methylamine iodide (MAI), methylamine thiocyanate (MASCN) and methylamine acetate (MAAc) salts. After MAI salt post-treatment, a record high efficiency of 14.98% was obtained for MAPbI3 PeQD solar cells together with enhanced ambient stability.

Chirality of CsPbBr3 Nanocrystals with Varying Dimensions in the Presence of Chiral Molecules

Chiral lead halide perovskite (LHP) nanocrystals (NCs) have been attracting considerable interest for circularly polarized luminescence (CPL)-based optoelectronic applications. This study combined experimental and computational analyses to investigate how the dimensionality of 3D (cubic) to 0D (quantum dots) influences the tunable chiral emission of CsPbBr3 LHP NCs. The circular dichroism (CD) spectra have a significant blue shift from 508 to 406 nm. The dissymmetry factors for CD (gCD) change from ±2.5 × 10-3 to ±7.5 × 10-3 as dimensionality varies from 3D to 0D in the presence of the chiral molecule (cyclohexylethylamine, CHEA). A significant luminescence dissymmetry factor (glum) of ±5.6 × 10-4 is observed in the 0D CsPbBr3 NCs. Theoretical calculations using structural distortion parameters, the extent of charge transfer, and electrostatic potential profiles have revealed that the most significant enhancement of the chirality transfer occurs from the CHEA molecules to 0D NCs, and the order of chirality transfer from CHEA to CsPbBr3 NCs is 0D (quantum dots) > 2D (nanoplatelet) > 3D (cubic).

Phenylethylammonium bromide-assisted solution-phase ligand exchange in CsPbBr3quantum dot solar cells

CsPbBr3quantum dots (QDs) have excellent optical properties and good phase stability, but the long-chain ligands on their surfaces affect the charge transfer between QDs. Here, we propose a simple ligand exchange strategy: solution-phase ligand exchange. By adding an acetone solution of phenylethylammonium bromide to the purification process of CsPbBr3QDs, the long-chain ligands were effectively replaced and the electric coupling between QDs was improved. As a result, the power conversion efficiency of the solar cell was increased from 1.95% to 2.83%. Meanwhile, the stability of the devices was significantly improved in the unencapsulated case.

Ligand Engineering of Inorganic Lead Halide Perovskite Quantum Dots toward High and Stable Photoluminescence

The ligand engineering of inorganic lead halide perovskite quantum dots (PQDs) is an indispensable strategy to boost their photoluminescence stability, which is pivotal for optoelectronics applications. CsPbX3 (X = Cl, Br, I) PQDs exhibit exceptional optical properties, including high color purity and tunable bandgaps. Despite their promising characteristics, environmental sensitivity poses a challenge to their stability. This article reviews the solution-based synthesis methods with ligand engineering. It introduces the impact of factors like humidity, temperature, and light exposure on PQD's instability, as well as in situ and post-synthesis ligand engineering strategies. The use of various ligands, including X- and L-type ligands, is reviewed for their effectiveness in enhancing stability and luminescence performance. Finally, the significant potential of ligand engineering for the broader application of PQDs in optoelectronic devices is also discussed.

Perovskite Colloidal Nanocrystal Solar Cells: Current Advances, Challenges, and Future Perspectives

The power conversion efficiencies (PCEs) of polycrystalline perovskite (PVK) solar cells (SCs) (PC-PeSCs) have rapidly increased. However, PC-PeSCs are intrinsically unstable without encapsulation, and their efficiency drops during large-scale production; these problems hinder the commercial viability of PeSCs. Stability can be increased by using colloidal PVK nanocrystals (c-PeNCs), which have high surface strains, low defect density, and exceptional crystal quality. The use of c-PeNCs separates the crystallization process from the film formation process, which is preponderant in large-scale fabrication. Consequently, the use of c-PeNCs has substantial potential to overcome challenges encountered when fabricating PC-PeSCs. Research on colloidal nanocrystal-based PVK SCs (NC-PeSCs) has increased their PCEs to a level greater than those of other quantum-dot SCs, but has not reached the PCEs of PC-PeSCs; this inferiority significantly impedes widespread application of NC-PeSCs. This review first introduces the distinctive properties of c-PeNCs, then the strategies that have been used to achieve high-efficiency NC-PeSCs. Then it discusses in detail the persisting challenges in this domain. Specifically, the major challenges and solutions for NC-PeSCs related to low short-circuit current density Jsc are covered. Last, the article presents a perspective on future research directions and potential applications in the realm of NC-PeSCs.

Surface defect mitigation via alkyl-ligand-controlled purification for stable and high-luminescence perovskite quantum dots

Perovskite quantum dots (PQDs) have received considerable attention as fluorescent materials due to their excellent optical properties. However, because PQDs contain ionic bonds, they have the disadvantage of being vulnerable to environmental conditions, so improving their stability is essential. Indeed, recent research has focused on improving both the stability and luminescence of PQDs by mixing them with methyl acetate (MeOAc) to suppress surface defects via purification. MeOAc reacts with the surface ligands of PQDs, resulting in ligand-controlled purification. However, while the ligands are limited for the PQD synthesis, the effect of ligand alkyl-chain length has not been reported. Therefore, we report herein a strategy for obtaining stable PQDs with tunable performances by using amine ligands of various chain lengths. The amine ligand is selected because it is very effective in interacting with the halide vacancies present on the surface of the perovskite crystal structure. The results indicate that MeOAc becomes less effective as the chain length of the ligand is increased, and more effective as the chain length is decreased. Consequently, PQDs treated with MeOAc and a short-chain ligand afford a quantum yield (QY) of 79.2% and are highly stable when exposed to thermal and ambient conditions. Therefore, we suggest a facile approach to suppressing the degradation of PQDs during the fabrication process.

Passivation of 2D Cs2PbI2Cl2 Nanosheets for Efficient and Stable CsPbI3 Quantum Dot Solar Cells

Inorganic CsPbI3 perovskite quantum dots (PQDs) possess remarkable optical properties, making them highly promising for photovoltaic applications. However, the inadequate stability resulting from internal structural instability and the complex external surface chemical environment of CsPbI3 PQDs has hindered the development of CsPbI3 PQD solar cells (PQDSCs). In this work, the capping layer composed of inorganic two-dimensional (2D) Ruddlesden-Popper (RP) phase Cs2PbI2Cl2 nanosheets (NSs) is introduced, which may be effectively treated to improve the surface properties of the CsPbI3 PQD film. This modification serves to passivate defects by filling cesium and iodine vacancies while optimizing the energy band arrangement and preventing humidity intrusion, leading to the meliorative stability and photovoltaic performance. The optimized CsPbI3 PQDSCs achieve an enhanced power conversion efficiency (PCE) of 14.73%, with the superb stability of only a 16% efficiency loss after being exposed to ambient conditions (30 ± 5% RH) for 432 h.

Size-Controlled Cu3VSe4 Nanocrystals as Cathode Material in Platinum-Free Dye-Sensitized Solar Cells

In this work, we report the first single-step, size-controlled synthesis of Cu3VSe4 cuboidal nanocrystals, with the longest dimension ranging from 9 to 36 nm, and their use in replacing the platinum counter electrode in dye-sensitized solar cells. Cu3VSe4, a ternary semiconductor from the class of sulvanites, is theoretically predicted to have good hole mobility, making it a promising candidate for charge transport in solar photovoltaic devices. The identity and crystalline purity of the Cu3VSe4 nanocrystals were validated by X-ray powder diffraction (XRD) and Raman spectroscopy. The particle size was determined from the XRD data using the Williamson-Hall equation and was found in agreement with the transmission electron microscopy imaging. Based on the electrochemical activity of the Cu3VSe4 nanocrystals, studied by cyclic voltammetry, the nanomaterials were further employed for fabricating counter electrodes (CEs) in Pt-free dye-sensitized solar cells. The counter electrodes were prepared from Cu3VSe4 nanocrystals as thin films, and the charge transfer kinetics were studied by electrochemical impedance spectroscopy. The work demonstrates that Cu3VSe4 counter electrodes successfully replace platinum in DSSCs. CEs fabricated with the Cu3VSe4 nanocrystals having an average particle size of 31.6 nm outperformed Pt, leading to DSSCs with the highest power conversion efficiency (5.93%) when compared with those fabricated with the Pt CE (5.85%).

Nucleophilic Reaction-Enabled Chloride Modification on CsPbI3 Quantum Dots for Pure Red Light-Emitting Diodes with Efficiency Exceeding 26

High-performance pure red perovskite light-emitting diodes (PeLEDs) with an emission wavelength shorter than 650 nm are ideal for wide-color-gamut displays, yet remain an unprecedented challenge to progress. Mixed-halide CsPb(Br/I)3 emitter-based PeLEDs suffer spectral stability induced by halide phase segregation and CsPbI3 quantum dots (QDs) suffer from a compromise between emission wavelength and electroluminescence efficiency. Here, we demonstrate efficient pure red PeLEDs with an emission centered at 638 nm based on PbClx -modified CsPbI3 QDs. A nucleophilic reaction that releases chloride ions and manipulates the ligand equilibrium of the colloidal system is developed to synthesize the pure red emission QDs. The comprehensive structural and spectroscopic characterizations evidence the formation of PbClx outside the CsPbI3 QDs, which regulates exciton recombination and prevents the exciton from dissociation induced by surface defects. In consequence, PeLEDs based on PbClx -modified CsPbI3 QDs with superior optoelectronic properties demonstrate stable electroluminescence spectra at high driving voltages, a record external quantum efficiency of 26.1 %, optimal efficiency roll-off of 16.0 % at 1000 cd m-2 , and a half lifetime of 7.5 hours at 100 cd m-2 , representing the state-of-the-art pure red PeLEDs. This work provides new insight into constructing the carrier-confined structure on perovskite QDs for high-performance PeLEDs.

Multi-Species Surface Reconstruction for High-Efficiency Perovskite Nanocrystal Light-Emitting Diodes

Although colloidal perovskite nanocrystal (PNC) solution has exhibited near-unity photoluminescence quantum yield (PLQY), the luminance would be severely quenched when the PNC solution is assembled into thin films due to the agglomeration and fusion of NCs caused by the exfoliation of surface ligands and non-radiative Förster resonance energy transfer (FRET) from small to large particle sizes, which seriously affected the performances of light-emitting diodes (LEDs). Here, we used Guanidine thiocyanate (GASCN) and Sodium thiocyanate (NaSCN) to achieve effective CsPbI3 PNC surface reconstruction. Due to the strong coordination ability of these small molecules with the anions and cations on the surface of the PNCs, they can provide strong surface protection against PNC fusion during centrifugal purification process and repair the surface defects of PNCs, so that the original uniform size distribution of PNCs can be maintained and FRET between close-packed PNC films is effectively suppressed, which allows the emission characteristics of the films to be preserved. As a result, highly oriented, smooth and nearly defect-free high-quality PNC thin films are obtained, with PLQY as high as 95.1 %, far exceeding that of the original film, and corresponding LEDs exhibit a maximum external quantum efficiency of 24.5 %.

Amino Acid Double-Passivation-Enhanced Quantum Dot Coupling for High-Efficiency FAPbI3 Perovskite Quantum Dot Solar Cells

Formamidinium lead triiodide (FAPbI3) perovskite quantum dot has outstanding durability, reasonable carrier lifetime, and long carrier diffusion length for a new generation of highly efficient solar cells. However, ligand engineering is a dilemma because of the highly ionized and dynamic characteristics of quantum dots. To circumvent this issue, herein, we employed a mild solution-phase ligand-exchange approach through adding short-chain amino acids that contain amino and carboxyl groups to modify quantum dots and passivate their surface defects during the purification process. As a result, the photoelectric conversion efficiency of FAPbI3 perovskite quantum dot solar cells (PQDSCs) increased from 11.23 to 12.97% with an open-circuit voltage of 1.09 V, a short-circuit current density of 16.37 mA cm-2, and a filling factor of 72.13%. Furthermore, the stability of the device modified by amino acids retains over 80% of the initial efficiency upon being exposed to 20-30% relative humidity for 240 h of aging treatment. This work may offer an innovative concept and approach for surface ligand treatment to improve the photovoltaic performance of PQDSCs toward large-scale manufacture.

Regulating Charge Carrier Dynamics in Stable Perovskite Nanorods for Photo-Induced Atom Transfer Radical Polymerization

Semiconducting nanocrystals have attracted world-wide research interest in artificial photosynthesis due to their appealing properties and enticing potentials in converting solar energy into valuable chemicals. Compared to 0D nanoparticles, 1D nanorods afford long-distance charge carriers separation and extended charge carriers lifetime due to the release of quantum confinement in axial direction. Herein, stable CsPbBr3 nanorods of distinctive dimensions are crafted without altering their properties and morphology via grafting hydrophobic polystyrene (PS) chains through a post-synthesis ligand exchange process. The resulting PS-capped CsPbBr3 nanorods exhibit a series of enhanced stabilities against UV irradiation, elevated temperature, and polar solvent, making them promising candidates for photo-induced atom transfer radical polymerization (ATRP). Tailoring the surface chemistry and dimension of the PS-capped CsPbBr3 nanorods endows stable, but variable reaction kinetics in the photo-induced ATRP of methyl methacrylate. The trapping-detrapping process of photogenerated charge carriers lead to extended lifetime of charge carriers in lengthened CsPbBr3 nanorods, contributing to a facilitated reaction kinetics of photo-induced ATRP. Therefore, by leveraging such stable PS-capped CsPbBr3 nanorods, the effects of surface chemistry and charge carriers dynamics on its photocatalytic performance are scrutinized, providing fundamental understandings for designing next-generation efficient nanostructured photocatalyst in artificial photosynthesis and solar energy conversion.

In Situ Surface Reconstruction toward Planar Heterojunction for Efficient and Stable FAPbI3 Quantum Dot Solar Cells

Pure-phase α-FAPbI3 quantum dots (QDs) are the focus of an increasing interest in photovoltaics due to their superior ambient stability, large absorption coefficient, and long charge-carrier lifetime. However, the trap states induced by the ligand-exchange process limit the photovoltaic performances. Here, a simple post treatment using methylamine thiocyanate is developed to reconstruct the FAPbI3 -QD film surface, in which a MAPbI3 capping layer with a thickness of 6.2 nm is formed on the film top. This planar perovskite heterojunction leads to a reduced density of trap-states, a decreased band gap, and a facilitated charge carrier transport. As a result, a record high power conversion efficiency (PCE) of 16.23% with negligible hysteresis is achieved for the FAPbI3 QD solar cell, and it retains over 90% of the initial PCE after being stored in ambient environment for 1000 h.

Stable and Highly Efficient Photocatalysis with Two-Dimensional Organic-Inorganic Hybrid Perovskites

Two-dimensional organic-inorganic hybrid perovskites (OIHPs) have excellent photoelectric properties, such as high charge mobility and a high optical absorption coefficient, which have attracted enormous attention in the field of optoelectronic devices and photochemistry. However, the stability of 2D OIHPs in solution is deficient. In particular, the lack of stability in polar solutions hinders their application in photochemistry. In this work, (iso-BA)2PbI4 was used as a model to explore the three possibilities of the stable existence of a 2D perovskite in aqueous solution. And two of these systems that stabilize the presence of (iso-BA)2PbI4 were further investigated through electrochemical testing. Moreover, (iso-BA)2PbI4 2D hybrid perovskites exhibited an outstanding degradation rate. The chiral perovskite (R/S-MBA)2PbI4 is able to degrade a 30 mg/L methyl orange solution completely within 5 min, making it one of the fastest catalysts for this particular organic reaction. Further, based on the electron spin resonance test, a degradation mechanism by the halide perovskite was proposed. Based on the great catalytic performance as well as good reusability and stability, (R/S-MBA)2PbI4 perovskites are expected to be a new generation of catalysts, making a great impact on the application of asymmetrically catalyzed photoreactions.

Simultaneously improved photoluminescence, stability, and carrier transport of perovskite nanocrystals by post-synthetic perfluorobutanesulfonic acid treatment

We report a post-synthetic treatment method based on perfluorobutanesulfonic acid (PFBA) to ameliorate the photophysical performance of perovskite nanocrystals. By virtue of the PFBA treatment, both the photoluminescence efficiency and stability of perovskite quantum dot-based colloidal solutions and the electrical conductivity of their close-packed films are simultaneously improved.

Fostering the Dense Packing of Halide Perovskite Quantum Dots through Binary-Disperse Mixing

Due to their versatile applications, perovskite quantum dot (PQD)-based optoelectrical devices have garnered significant research attention. However, the fundamental packing behavior of PQDs in thin films and its impact on the device performance remain relatively unexplored. Drawing inspiration from theoretical models concerning packing density with size mixtures, this study presents an effective strategy, namely, binary-disperse mixing, aimed at enhancing the packing density of PQD films. Comprehensive grazing-incidence small-angle X-ray characterization suggested that the PQD film consists of three phases: two monosize phases and one binary mixing phase. The volume fraction and population of the binary-size phase can be tuned by mixing an appropriate amount of large and small PQDs. Furthermore, we performed multi-length-scale all-atom and coarse-grained molecular dynamics simulations to elucidate the distribution and conformation of organic surface ligands, highlighting their influence on PQD packing. Notably, the mixing of two PQDs of different sizes promotes closer face-to-face contact. The densely packed binary-disperse film exhibited largely suppressed trap-assisted recombination, much longer carrier lifetime, and thereby improved power conversion efficiency. Hence, this study provides fundamental understanding of the packing mechanism of perovskite quantum dots and highlights the significance of packing density for PQD-based solar cells.

Controllable Colloidal Synthesis of MAPbI3 Perovskite Nanocrystals for Dual-Mode Optoelectronic Applications

This study demonstrates an acetate ligand (AcO-)-assisted strategy for the controllable and tunable synthesis of colloidal methylammonium lead iodide (MAPbI3) perovskite nanocrystals (PNCs) for efficient photovoltaic and photodetector devices. The size of colloidal MAPbI3 PNCs can be tuned from 9 to 20 nm by changing the AcO-/MA ratio in the reaction precursor. In situ observations and detailed characterization results show that the incorporation of the AcO- ligand alters the formation of PbI6 octahedral cages, which controls PNC growth. A well-optimized AcO-/MA ratio affords MAPbI3 PNCs with a low defect density, a long carrier lifetime, and unique solid-state isotropic properties, which can be used to fabricate solution-processed dual-mode photovoltaic and photodetector devices with a conversion efficiency of 13.34% and a detectivity of 2 × 1011 Jones, respectively. This study provides an avenue to further the precisely controllable synthesis of hybrid PNCs for multifunctional optoelectronic applications.

Ligand-Assisted Self-Assembly of 3D Perovskite Nanocrystals into Chiral Inorganic Quasi-2D Perovskites (n = 3) with Ligand-Ratio-Dependent Chirality Inversion

Chiral inorganic quasi-2D perovskites are prepared by self-assembling 3D perovskites in solution for the first time. The quasi-2D perovskite synthesized is a pure-phase perovskite with = 3 and is periodically arranged, which is a big breakthrough in quasi-2D inorganic perovskites.  With the individual chiral CsPbBr3 nanocrystals (NCs) assemble into quasi-2D perovskite, the g-factor significantly improved (≈5 × 10-3 ). In addition, the chiroptical activity of quasi-2D perovskites is explored to be improved with the lateral size increasing. In the first stage of assembly, chiral optical activity is increased due to the lateral size-dependent optical activity, while the changes in the later stages are attributable to the chiral morphology. Interestingly, chirality inversion is found to be correlated to the number of ligands. It is believed that different conformers of chiral ligands caused by steric hindrance of the original ligand oleylamine result in opposite circular dichroism (CD) polarities. The chirality inversion phenomenon is universal, regardless of the choice of ligands. This work opens up a new path for the synthesis of quasi-2D perovskites and provides more opportunities for the modulation of chiral optical activity.

Overcoming Charge Confinement in Perovskite Nanocrystal Solar Cells

The small nanoparticle size and long-chain ligands in colloidal metal halide perovskite quantum dots (PeQDs) cause charge confinement, which impedes exciton dissociation and carrier extraction in PeQD solar cells, so they have low short-circuit current density Jsc , which impedes further increases in their power conversion efficiency (PCE). Here, a re-assembling process (RP) is developed for perovskite nanocrystalline (PeNC) films made of colloidal perovskite nanocrystals to increase Jsc in PeNC solar cells. The RP of PeNC films increases their crystallite size and eliminates long-chain ligands, and thereby overcomes the charge confinement in PeNC films. These changes facilitate exciton dissociation and increase carrier extraction in PeNC solar cells. By use of this method, the gradient-bandgap PeNC solar cells achieve a Jsc = 19.30 mA cm-2 without compromising the photovoltage, and yield a high PCE of 16.46% with negligible hysteresis and good stability. This work provides a new strategy to process PeNC films and pave the way for high performance PeNC optoelectronic devices.

Stabilized Perovskite Quantum Dot Solids via Nonpolar Solvent Dispersible Covalent Ligands

The ligand exchange procedure of CsPbI3 perovskite quantum dots (PQDs) enables the fabrication of thick and conductive PQD solids that act as a photovoltaic absorber for solution-processed thin-film solar cells. However, the ligand-exchanged CsPbI3 PQD solids suffer from deterioration in photovoltaic performance and ambient stability due to the surface traps, such as uncoordinated Pb2+ sites on the PQD surface, which are generated after the conventional ligand exchange process using ionic short-chain ligands dissolved in polar solvents. Herein, a facile surface stabilization is demonstrated that can simultaneously improve the photovoltaic performance and ambient stability of CsPbI3 PQD photovoltaic absorber using covalent short-chain triphenylphosphine oxide (TPPO) ligands dissolved in a nonpolar solvent. It is found that the TPPO ligand can be covalently bound to uncoordinated Pb2+ sites and the nonpolar solvent octane can completely preserve the PQD surface components. Owing to their synergetic effects, the CsPbI3 PQD photovoltaic absorber stabilized using the TPPO ligand solution dissolved in octane exhibit higher optoelectrical properties and ambient stability than the control absorber. Consequently, CsPbI3 PQD solar cells composed of PQD photovoltaic absorbers fabricated via surface stabilization strategy provide an improved power conversion efficiency of 15.4% and an enhanced device stability.

High Quality Factor in Solution-Processed Inorganic Microcavities Embedding CsPbBr3 Perovskite Nanocrystals

Optical microcavities grant manipulation over light-matter interactions and light propagation, enabling the fabrication of foundational optical and optoelectronic components. However, the materials used for high-performing systems, mostly bulk inorganics, are typically costly, and their processing is hardly scalable. In this work, we present an alternative way to fabricate planar optical resonators via solely solution processing while approaching the performances of conventional systems. Here, we couple fully solution-processed high dielectric contrast inorganic Bragg mirrors obtained by sol-gel deposition with the remarkable photoluminescence properties of CsPbBr3 perovskite nanocrystals. The approach yields microcavities with a quality factor of ∼220, which is a record value for solution-processed inorganic structures, and a strong emission redistribution resulting in a 3-fold directional intensity enhancement.

In Situ Iodide Passivation Toward Efficient CsPbI3 Perovskite Quantum Dot Solar Cells

Highlights

The introduction of hydroiodic acid (HI) manipulates the dynamic conversion of PbI2 into highly coordinated species to optimize the nucleation and growth kinetics. The addition of HI enables the fabrication of CsPbI3 perovskite quantum dots with reduced defect density, enhanced crystallinity, higher phase purity, and near-unity photoluminescence quantum yield. The efficiency of CsPbI3 perovskite quantum dot solar cells was enhanced from 14.07% to 15.72% together with enhanced storage stability.

Abstract

All-inorganic CsPbI3 quantum dots (QDs) have demonstrated promising potential in photovoltaic (PV) applications. However, these colloidal perovskites are vulnerable to the deterioration of surface trap states, leading to a degradation in efficiency and stability. To address these issues, a facile yet effective strategy of introducing hydroiodic acid (HI) into the synthesis procedure is established to achieve high-quality QDs and devices. Through an in-depth experimental analysis, the introduction of HI was found to convert PbI2 into highly coordinated [PbIm]2−m, enabling control of the nucleation numbers and growth kinetics. Combined optical and structural investigations illustrate that such a synthesis technique is beneficial for achieving enhanced crystallinity and a reduced density of crystallographic defects. Finally, the effect of HI is further reflected on the PV performance. The optimal device demonstrated a significantly improved power conversion efficiency of 15.72% along with enhanced storage stability. This technique illuminates a novel and simple methodology to regulate the formed species during synthesis, shedding light on further understanding solar cell performance, and aiding the design of future novel synthesis protocols for high-performance optoelectronic devices.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40820-023-01134-1.

Antisolvent-Assisted In Situ Cation Exchange of Perovskite Quantum Dots for Efficient Solar Cells

Cesium-formamidinium lead iodide perovskite quantum dots (FA_x Cs_{1- x} PbI₃ PQDs) show high potential for next-generation photovoltaics due to their outstanding optoelectronic properties. However, achieving composition-tunable hybrid PQDs with desirable charge transport remains a significant challenge. Herein, by leveraging an antisolvent-assisted in situ cation exchange of PQDs, homogeneous FA_x Cs_{1- x} PbI₃ PQDs with controllable stoichiometries and surface ligand chemistry are realized. Meanwhile, the crystallographic stability of PQDs is substantially improved by substituting the cations of the PQDs mediated by surface vacancies. Consequently, PQD solar cell delivers an efficiency of 17.29%, the highest value among the homostructured PQD solar cells. The high photovoltaic performance is attributed to the broadened light harvesting spectra, flattened energy landscape, and rationalized energy levels of highly oriented PQD solids, leading to efficient charge carrier extraction. This work provides a feasible approach for the stoichiometry regulation of PQDs to finely tailor the optoelectronic properties and tolerance factors of PQDs toward high-performing photovoltaics.

Tailoring multifunctional anions to inhibit methanol absorption on a CsPbBr3 quantum dot surface for highly efficient semi-transparent photovoltaics

Methyl acetate (MeOAc) is the most used antisolvent in the preparation of perovskite quantum dot (QD) films. However, the hydrolysis of MeOAc results in acetic acid and methanol (MeOH), and the decomposition of the perovskite occurs more easily under acidic and polar conditions. Herein, we report a facile and universal anion modification strategy to inhibit MeOH absorption on a perovskite QD surface and improve the photovoltaic performance of perovskite QD solar cells, which is implemented by incorporating a series of guanidinium salts containing different anions (guanidinium bromide (GuaBr), guanidinium thiocyanate (GuaSCN), and guanidinium acetate (GuaAc)). All anions play a positive role in inhibiting the absorption of MeOH on the QD surface, facilitating charge transfer between perovskite QDs and passivating the defects. Moreover, the regulation of surface chemistry can be optimized by rational tailoring of different anion species. The GuaAc-based devices deliver a PCE of 7.04%, which is the highest value among inorganic CsPbBr₃ QD solar cells. More importantly, the CsPbBr₃ QD solar cells exhibit high transparency over the entire visible spectrum region, indicating their promising application in solar windows.

3D/2D Core/Shell Perovskite Nanocrystals for High-Performance Solar Cells

All-inorganic lead halide perovskite nanocrystals (NCs) emerge as a rising star in photovoltaic fields on account of their excellent optoelectronic properties. However, it still remains challenging to further promote photovoltaic efficiency due to the susceptible surface and inevitable vacancies. Here, this work reports a 3D/2D core/shell perovskite heterojunction based on CsPbI₃ NCs and its performance in solar cells. The guanidinium (GA⁺ ) rich 2D nanoshells can significantly passivate surface trap states and lower the capping ligand density, resulting in improved photoelectric properties and carrier transport and diminished nonradiative recombination centers via the hydrogen bonds from amino groups in GA⁺ ions. Consequently, an outstanding power conversion efficiency (PCE) of up to 15.53% is realized, substantially higher than the control device (13.77%). This work highlights the importance of surface chemistry and offers a feasible avenue to achieve high-performance perovskite NCs-based optoelectronic devices.

Open-circuit voltage loss in perovskite quantum dot solar cells

Perovskite quantum dots are a competitive candidate for next-generation solar cells owing to their superior phase stability and multiple exciton generation effects. However, given the voltage loss in perovskite quantum dot solar cells (PQDSCs) is mainly caused by various surface and interfacial defects and the energy band mismatch in the devices, tremendous achievements have been made to mitigate the V_oc loss of PQDSCs. Herein, we elucidate the potential threats that hinder the high V_oc of PQDSCs. Then, we summarize recent progress in minimizing open-circuit voltage (V_oc) loss, including defect manipulation and device optimization, based on band-alignment engineering. Finally, we attempt to shed light on the methodologies used to further improve the performance of PQDSCs.

Anionic ligand-induced chirality in perovskite nanoplatelets

Perovskite materials passivated by chiral ligands have recently shown unique chiroptical activity with promising optoelectronic applications. However, the ligands have been limited to chiral amines. Here, chiral phosphate molecules have been exploited to synthesize CsPbBr₃ nanoplatelets. The nanoplatelets showed a distinct circular dichroism signal and maintained their chiroptical properties after purification with anti-solvent.

A Universal Perovskite Nanocrystal Ink for High-Performance Optoelectronic Devices

Semiconducting lead halide perovskite nanocrystals (PNCs) are regarded as promising candidates for next-generation optoelectronic devices due to their solution processability and outstanding optoelectronic properties. While the field of light-emitting diodes (LEDs) and photovoltaics (PVs), two prime examples of optoelectronic devices, has recently seen a multitude of efforts toward high-performance PNC-based devices, realizing both devices with high efficiencies and stabilities through a single PNC processing strategy has remained a challenge.  In this work, diphenylpropylammonium (DPAI) surface ligands, found through a judicious ab-initio-based ligand search, are shown to provide a solution to this problem. The universal PNC ink with DPAI ligands presented here, prepared through a solution-phase ligand-exchange process, simultaneously allows single-step processed LED and PV devices with peak electroluminescence external quantum efficiency of 17.00% and power conversion efficiency of 14.92% (stabilized output 14.00%), respectively. It is revealed that a careful design of the aromatic rings such as in DPAI is the decisive factor in bestowing such high performances, ease of solution processing, and improved phase stability up to 120 days. This work illustrates the power of ligand design in producing PNC ink formulations for high-throughput production of optoelectronic devices; it also paves a path for "dual-mode" devices with both PV and LED functionalities.

Zero Dimensional-Two Dimensional Hybrid Photodetectors Using Multilayer MoS2 and Lead Halide Perovskite Quantum Dots with a Tunable Bandgap

We report high-performance 0D-2D hybrid photodetectors integrated with tunable band gap perovskite (CsPbI₃, Cs_XFA_X-1PbI₃, and FAPbI₃) quantum dots and MOCVD-grown bilayer MoS₂. In our hybrid structure, the lead halide PQDs can be utilized as an absorbing layer of light of specific wavelengths and transfer the photogenerated carriers to the MoS₂ transport layer. With tunable wavelength lead halide PQDs, the 0D-2D hybrid photodetector shows a high responsivity up to 10⁷ AW^-1 and high specific detectivity exceeding 10¹³ Jones due to the difference in the built-in potential between PQDs and multilayer MoS₂ layers. This work proposes the possibility of fabricating high-performance photodetectors by hybridizing PQDs of various band gaps with 2D materials.

Ligand-Assisted Coupling Manipulation for Efficient and Stable FAPbI3 Colloidal Quantum Dot Solar Cells

For emerging perovskite quantum dots (QDs), understanding the surface features and their impact on the materials and devices is becoming increasingly urgent. In this family, hybrid FAPbI₃ QDs (FA: formamidium) exhibit higher ambient stability, near-infrared absorption and sufficient carrier lifetime. However, hybrid QDs suffer from difficulty in modulating surface ligand, which is essential for constructing conductive QD arrays for photovoltaics. Herein, assisted by an ionic liquid formamidine thiocyanate, we report a facile surface reconfiguration methodology to modulate surface and manipulate electronic coupling of FAPbI₃ QDs, which is exploited to enhance charge transport for fabricating high-quality QD arrays and photovoltaic devices. Finally, a record-high efficiency approaching 15 % is achieved for FAPbI₃ QD solar cells, and they retain over 80 % of the initial efficiency after aging in ambient environment (20-30 % humidity, 25 °C) for over 600 h.

Tiny spots to light the future: advances in synthesis, properties, and application of perovskite nanocrystals in solar cells

Perovskites are in the hotspot of material science and technology. Outstanding properties have been discovered, fundamental mechanisms of defect formation and degradation elucidated, and applications in a wide variety of optoelectronic devices demonstrated. Advances through adjusting the bulk-perovskite composition, as well as the integration of layered and nanostructured perovskites in the devices, allowed improvement in performance and stability. Recently, efforts have been devoted to investigating the effects of quantum confinement in perovskite nanocrystals (PNCs) aiming to fabricate optoelectronic devices based solely on these nanoparticles. In general, the applications are focused on light-emitting diodes, especially because of the high color purity and high fluorescence quantum yield obtained in PNCs. Likewise, they present important characteristics featured for photovoltaic applications, highlighting the possibility of stabilizing photoactive phases that are unstable in their bulk analog, the fine control of the bandgap through size change, low defect density, and compatibility with large-scale deposition techniques. Despite the progress made in the last years towards the improvement in the performance and stability of PNCs-based solar cells, their efficiency is still much lower than that obtained with bulk perovskite, and discussions about upscaling of this technology are scarce. In light of this, we address in this review recent routes towards efficiency improvement and the up-scaling of PNC solar cells, emphasizing synthesis management and strategies for solar cell fabrication.

Synthesis and Applications of Halide Perovskite Nanocrystals in Optoelectronics

The perovskites used for optoelectronic devices have been more attractive during recent years due to their wide variety of advantages, such as their low cost, high photoluminescence quantum yield (PLQY), high carrier mobility, flexible bandgap tunability, and high light absorption ability. However, optoelectronic applications for traditional inorganic and organic materials present dilemmas due to their hardly tunable bandgap and instability. On the other hand, there are some more important benefits for perovskite nanocrystals, such as a size-dependent bandgap and the availability of anion exchange at room temperature. Therefore, perovskite NC-based applications are currently favored, offering a research direction beyond perovskite, and much research has focused on the stability issue and device performance. Thus, the synthesis and applications of perovskite NCs need to be thoroughly discussed for the future development of solar cells, light-emitting diodes, photodetectors, and laser research.

Key Factors Affecting the Stability of CsPbI3 Perovskite Quantum Dot Solar Cells: A Comprehensive Review

The power conversion efficiency of CsPbI₃ perovskite quantum dot (PQD) solar cells shows increase from 10.77% to 16.2% in a short period owing to advances in material and device design for solar cells. However, the device stability of CsPbI₃ PQD solar cells remains poor in ambient conditions, which requires an in-depth understanding of the degradation mechanisms of CsPbI₃ PQDs solar cells in terms of both inherent material properties and device characteristics. Along with this analysis, advanced strategies to overcome poor device stability must be conceived. In this review, fundamental mechanisms that cause the degradation of CsPbI₃ PQD solar cells are discussed from the material property and device viewpoints. In addition, based on detailed insights into degradation mechanisms in CsPbI₃ PQD solar cells, various strategies are introduced to improve the stability of CsPbI₃ PQD solar cells. Finally, future perspectives and challenges are presented to achieve highly durable CsPbI₃ PQD solar cells. The investigation of the degradation mechanisms and the stability enhancement strategies can pave the way for the commercialization of CsPbI₃ PQD solar cells.