Controlled Cationic Polymerization: Single-Component Initiation under Ambient Conditions

Degradable thermosets via orthogonal polymerizations of a single monomer

Crosslinked thermosets are highly durable materials, but overcoming their petrochemical origins and inability to be recycled poses a grand challenge1-3. Many strategies to access crosslinked polymers that are bioderived or degradable-by-design have been proposed, but they require several resource-intensive synthesis and purification steps and are not yet feasible alternatives to conventional consumer materials4-8. Here we present a modular, one-pot synthesis of degradable thermosets from the commercially available, biosourced monomer 2,3-dihydrofuran (DHF)9. In the presence of a ruthenium catalyst and photoacid generator, DHF undergoes slow ring-opening metathesis polymerization to give a soft polymer; then, exposure to light triggers strong acid generation and promotes the cationic polymerization of the same DHF monomer to spatially crosslink and strengthen the material10-12. By manipulating catalyst loading and light exposure, we can access materials with physical properties spanning orders of magnitude and achieve spatially resolved material domains. Importantly, the DHF-based thermosets undergo stimuli-selective degradation and can be recycled to the monomer under mild heating. The use of two distinct polymerization mechanisms on a single functional group allows the synthesis of degradable and recyclable thermoset materials with precisely controlled properties.

Cationic polymerization of vinyl ethers using trifluoromethyl sulfonate/solvent/ligand to access well-controlled poly(vinyl ether)s

Cationic polymerization of vinyl ethers to access poly(vinyl ether) polymeric materials has been challenging due to stringent polymerization conditions and inevitable chain transfer. Herein we introduce a protocol using trifluoromethyl sulfonates to catalyze the polymerization of a series of vinyl ethers. These trifluoromethyl sulfonates are fully commercially available and can be stored under ambient conditions. Solvents and ligands have profound influences on the polymerization process, and poly(vinyl ether)s with different molecular weights, molecular weight distributions, and tacticities were obtained. A few combinations of trifluoromethyl sulfonate/solvents/O^O type ligands were explored. They showed high activities and afforded poly(vinyl ether)s with well-controlled tacticity, of which the isotacticity can be up to 81% m. Poly(vinyl ether)s with high tacticities exhibit crystallization behaviors with melting points. We also probed the cationic reversible addition-fragmentation chain transfer (RAFT) polymerization of ethyl vinyl ether employing a RAFT chain transfer agent. Low molecular weight distributions (Đs) around 1.1 can be realized. Since trifluoromethyl sulfonates can be fed at a remarkably low catalyst loading and other chemicals are cheap and easily available, the poly(vinyl ether) polymeric materials are promisingly prepared on a large scale.

Polymer-Metal-Organic Frameworks (polyMOFs) Based on Tailor-Made Poly(alkenamer)s

Polymeric linkers used to construct porous, crystalline polymer-metal-organic frameworks (polyMOFs) are predominantly based on macromolecules with metal-coordinating ligand units (e.g., 1,4-benzenedicarboxylic acid, H2bdc) included in the primary polymer backbone. Polymers with ligand units as pendants or dangling side chain substituents have been far less explored for the synthesis of polyMOFs, despite the fact that such systems may have distinct properties and could take advantage of a variety of chain polymerization methods. Prevailing reports are based on nonliving polymerized linkers with H2bdc pendants that generated polyMOFs with key shortcomings in controlling the polymerization, tailoring polymeric linker composition and polyMOF properties, accessing porosity, etc. Herein, polymers containing H2bdc units as pendants were designed and synthesized via controlled olefin-metathesis polymerization. These poly(alkenamer)s were subsequently assembled into porous, crystalline networks with an isoreticular MOF (IRMOF) lattice topology. These polymer architectures and polymerization methodologies provide access to the formation of polyMOFs with tailored characteristics, including controlled composition, narrow dispersity, and side chain functionalization.

Recent Developments on Cationic Polymerization of Vinyl Ethers

In recent times, the evolution of cationic polymerization has taken a multidirectional approach, with the development of cationic reversible addition-fragmentation chain transfer (RAFT) polymerization. In contrast to the conventional cationic polymerization methods, which were typically carried out under inert atmospheres and low temperatures, various novel polymerization techniques have been developed where the reactions are carried out in open air, operate at room temperature, are cost-effective, and are environmentally friendly. Besides, several external stimuli, such as heat, light, chemicals, electrical potential, etc. have been employed to activate and control the polymerization process. It also enables the combination of cationic polymerization with other polymerization methods in a single reaction vessel, eliminating the necessity for isolation and purification during intermediate steps. In addition, significant advancements have been made through various modifications in catalyst systems, resulting in polymers with an exceptionally high level of stereoregularity. This review article comprehensively analyses the recent developments in cationic polymerization, encompassing their applications and offering insights into future perspectives.

Zinc-Mediated Living Cationic Polymerization

Here, we present a facile and robust method for living cationic polymerization using zinc wire as a catalyst precursor. Well-defined poly(vinyl ether)s with various molecular weights and narrow molecular weight distributions (Đ < 1.10) can be achieved at room temperature. Excellent living characteristics were observed in kinetic and chain extension experiments. Mechanistic investigations revealed that the polymerization was catalyzed by the in situ generation of trace zinc ions, which is the key to polymerization under mild conditions. The utilization of zinc wire offers several advantages, including reusability, easy separation and low metal residue. Furthermore, we extended the application of this method in continuous flow polymerization, opening up a promising avenue for scalable and efficient industrial production under mild conditions.

Cationic β-Scission of C-H and C-C Bonds for Selective Dimerization and Subsequent Sulfur-Free RAFT Polymerization of α-Methylstyrene and Isobutylene

A series of exo-olefin compounds ((CH3 )2 C(PhY)-CH2 C(=CH2 )PhY) were prepared by selective cationic dimerization of α-methylstyrene (αMS) derivatives (CH2 =C(CH3 )PhY) with p-toluenesulfonic acid (TsOH) via β-C-H scission. They were subsequently used as reversible chain transfer agents for sulfur-free cationic RAFT polymerization of αMS via β-C-C scission in the presence of Lewis acid catalysts such as SnCl4 . In particular, exo-olefin compounds with electron-donating substituents, such as a 4-MeO group (Y) on the aromatic ring, worked as efficient cationic RAFT agents for αMS to produce poly(αMS) with controlled molecular weights and exo-olefin terminals. Other exo-olefin compounds (R-CH2 C(=CH2 )(4-MeOPh)) with various R groups were prepared by different methods to examine the effects of R groups on the cationic RAFT polymerization. A sulfur-free cationic RAFT polymerization also proceeded for isobutylene (IB) with the exo-olefin αMS dimer ((CH3 )2 C(Ph)-CH2 C(=CH2 )Ph). Furthermore, telechelic poly(IB) with exo-olefins at both terminals was obtained with a bifunctional RAFT agent containing two exo-olefins. Finally, block copolymers of αMS and methyl methacrylate (MMA) were prepared via mechanistic transformation from cationic to radical RAFT polymerization using exo-olefin terminals containing 4-MeOPh groups as common sulfur-free RAFT groups for both cationic and radical polymerizations.

Cyclopropenium Ions in Catalysis

Cyclopropenium ions are the smallest class of aromatic compounds, satisfying Hückel's rules of aromaticity with two π electrons within a three-membered ring. First prepared by Breslow in 1957, cyclopropenium ions have been found to possess extraordinary stability despite being both cationic and highly strained. In the 65 years since their first preparation, cyclopropenium ions have been the subject of innumerable studies concerning their synthesis, physical properties, and reactivity. However, prior to our work, the reactivity of these unique carbocations had not been exploited for reaction promotion or catalysis.Over the past 13 years, we have been exploring aromatic ions as unique and versatile building blocks for the development of catalysts for organic chemistry. A major portion of this work has been focused on leveraging the remarkable properties of the smallest of the aromatic ions─cyclopropeniums─as a design element in the invention of highly reactive catalysts. Indeed, because of its unique profile of hydrolytic stability, compact geometry, and relatively easy oxidizability, the cyclopropenium ring has proven to be a highly advantageous construction module for catalyst invention.In this Account, we describe some of our work using cyclopropenium ions as a key element in the design of novel catalysts. First, we discuss our early work aimed at promoting dehydrative reactions, starting with Appel-type chlorodehydrations of alcohols and carboxylic acids, cyclic ether formations, and Beckmann rearrangements and culminating in the realization of catalytic chlorodehydrations of alcohols and a catalytic Mitsunobu-type reaction. Next, we describe the development of cyclopropenimines as strong, neutral organic Brønsted bases and, in particular, the use of chiral cyclopropenimines for enantioselective Brønsted catalysis. We also describe the development of higher-order cyclopropenimine superbases. The use of tris(amino)cyclopropenium (TAC) ions as a novel class of phase-transfer catalysts is discussed for the reaction of epoxides with carbon dioxide. Next, we describe the formation of a cyclopropenone radical cation that has a portion of its spin density on the oxygen atom, leading to some peculiar metal ligand behavior. Finally, we discuss recent work that employs TAC electrophotocatalysts for oxidation reactions. The key intermediate for this chemistry is a TAC radical dication, which as an open-shell photocatalyst has remarkably strong excited-state oxidizing power. We describe the application of this strategy to transformations ranging from the oxidative functionalization of unactivated arenes to the regioselective derivatization of ethers, C-H aminations, vicinal C-H diaminations, and finally aryl olefin dioxygenations. Collectively, these catalytic platforms demonstrate the utility of charged aromatic rings, and cyclopropenium ions in particular, to enable unique advances in catalysis.

Poly(2,3-Dihydrofuran): A Strong, Biorenewable, and Degradable Thermoplastic Synthesized via Room Temperature Cationic Polymerization

Creation of strong and tough plastics from sustainable and biorenewable resources is a significant challenge in polymer science. This challenge is further complicated when attempting to make these materials using an economically viable process, which is often hindered by the production and availability of chemical feedstocks and the efficiency of the monomer synthesis. Herein, we report the synthesis and characterization of a strong thermoplastic made from 2,3-dihydrofuran (DHF), a monomer made in one step from 1,4-butanediol, a bioalcohol already produced on the plant scale. We developed a green, metal-free cationic polymerization to enable the production of poly(2,3-dihydrofuran) (PDHF) with molecular weights of up to 256 kg/mol at room temperature. Characterization of these polymers showed that PDHF possesses high tensile strength and toughness (70 and 14 MPa, respectively) comparable to commercial polycarbonate, high optical clarity, and good barrier properties to oxygen, carbon dioxide, and water. These properties make this material amenable to a variety of applications, from food packaging to high strength windows. Importantly, we have also developed a facile oxidative degradation process of PDHF, providing an end-of-life solution for PDHF materials.

Moisture tolerant cationic RAFT polymerization of vinyl ethers

Cationic reversible addition—fragmentation chain transfer (RAFT) polymerizations have permitted the controlled polymerization of vinyl ethers and select styrenics with predictable molar masses and easily modified thiocarbonylthio chain ends. However, most...

Controlled Cationic Polymerization Using RAFT Agents with Selenonium Cations as Metal-Free Lewis Acids: From Homogeneous to Heterogeneous Catalysis

Living cationic polymerization is a well-known technique, but it is generally limited by strict operating conditions. Here, a series of selenonium cations was used as a new class of catalysts...

Primary Alcohols via Nickel Pentacarboxycyclopentadienyl Diamide Catalyzed Hydrosilylation of Terminal Epoxides

The efficient and regioselective hydrosilylation of epoxides co-catalyzed by a pentacarboxycyclopentadienyl (PCCP) diamide nickel complex and Lewis acid is reported. This method allows for the reductive opening of terminal, monosubstituted epoxides to form unbranched, primary alcohols. A range of substrates including both terminal and nonterminal epoxides are shown to work, and a mechanistic rationale is provided. This work represents the first use of a PCCP derivative as a ligand for transition-metal catalysis.

Brønsted Acid Catalyzed Stereoselective Polymerization of Vinyl Ethers

Isotactic poly(vinyl ether)s (PVEs) have recently been identified as a new class of semicrystalline thermoplastics with a valuable combination of mechanical and interfacial properties. Currently, methods to synthesize isotactic PVEs are limited to strong Lewis acids that require a high catalyst loading and limit the accessible scope of monomer substrates for polymerization. Here, we demonstrate the first Brønsted acid catalyzed stereoselective polymerization of vinyl ethers. A single-component imidodiphosphorimidate catalyst exhibits a sufficiently low pK_a to initiate vinyl ether polymerization and acts as a chiral conjugate base to direct the stereochemistry of monomer addition to the oxocarbenium ion reactive chain end. This Brønsted acid catalyzed stereoselective polymerization enabled an expanded substrate scope compared to previous methods, the use of chain transfer agents to lower catalyst loading, and the capability to recycle the catalyst for multiple polymerizations.

Synthesis and Post-Polymerization Modification of Defined Functional Poly(vinyl ether)s

Living cationic polymerization is known for a good control over chain growth yielding polymers with well-defined molar mass distributions and low dispersities. However, the practical challenges involved in the synthesis of poly(vinyl ether)s limited suitable post-polymerization modifications (PPM) via chemoselective click reactions. Herein the successful controlled cationic polymerization of vinyl ethers bearing pendant CC double and C≡C triple bonds using a single-component initiation under ambient conditions is reported. Furthermore, the PPM via thiol-ene/-yne and copper(I)-catalyzed alkyne-azide cycloaddition reaction of the obtained polymers is successfully realized laying the foundation for the synthesis of unprecedented functional poly(vinyl ether)s.

Manganese-Catalyzed Batch and Continuous Flow Cationic RAFT Polymerization Induced by Visible Light

We present a robust manganese-catalyzed cationic reversible addition-fragmentation chain transfer (RAFT) polymerization induced by visible light. Well-defined poly(vinyl ether)s with controlled molecular weight and molecular weight distributions (MWDs) can be conveniently prepared at room temperature without monomer purification. The commercially available manganese carbonyl bromide is used as the photocatalyst for cationic RAFT polymerization. Moreover, this method has been further applied in both batch and continuous flow systems, providing a visible light induced flow cationic polymerization under mild conditions.

Recent Advances in Living Cationic Polymerization with Emerging Initiation/Controlling Systems

While the conventional living cationic polymerization (LCP) provided opportunities to synthesizing well-defined polymers with predetermined molecular weights, desirable chemical structures and narrow dispersity, it is still important to continuously innovate new synthetic methods to meet the increasing requirements in advanced material engineering. Consequently, a variety of novel initiation/controlling systems have be demonstrated recently, which have enabled LCP with spatiotemporal control, broadened scopes of monomers and terminals, more user-friendly operations and reaction conditions, as well as improved thermomechanical properties for obtained polymers. In this work, recent advances in LCP is summarized with emerging initiation/controlling systems, including chemical-initiated/controlled cationic reversible addition-fragmentation chain transfer (RAFT) polymerization, photoinitiated/controlled LCP, electrochemical-controlled LCP, thionyl/selenium halide-initiated LCP, organic acid-assisted LCP, and stereoselective LCP. It is hoped that this summary will provide useful knowledge to people in related fields and stimulate new ideas to promote the development and application of LCP in both academia and industry.

Hydrogen Bond Donor Catalyzed Cationic Polymerization of Vinyl Ethers

The synthesis of high-molecular-weight poly(vinyl ethers) under mild conditions is a significant challenge, since cationic polymerization reactions are highly sensitive to chain-transfer and termination events. We identified a novel and highly effective hydrogen bond donor (HBD)-organic acid pair that can facilitate controlled cationic polymerization of vinyl ethers under ambient conditions with excellent monomer compatibility. Poly(vinyl ethers) of molar masses exceeding 50 kg mol-1 can be produced within 1 h without elaborate reagent purification. Modification of the HBD structure allowed tuning of the polymerization rate, while DFT calculations helped elucidate crucial intermolecular interactions between the HBD, organic acid, and polymer chain end.

Living cationic polymerization of vinyl ethers initiated by electrophilic selenium reagents under ambient conditions

We present a living cationic polymerization of vinyl ethers utilizing electrophilic selenium reagents as initiators and pentacarbonylbromomanganese (Mn(CO)₅Br) as the catalyst.

The rise of bio-inspired polymer compartments responding to pathology-related signals

Self-organized nano- and microscale polymer compartments such as polymersomes, giant unilamellar vesicles (GUVs), polyion complex vesicles (PICsomes) and layer-by-layer (LbL) capsules have increasing potential in many sensing applications. Besides modifying the physicochemical properties of the corresponding polymer building blocks, the versatility of these compartments can be markedly expanded by biomolecules that endow the nanomaterials with specific molecular and cellular functions. In this review, we focus on polymer-based compartments that preserve their structure, and highlight the key role they play in the field of medical diagnostics: first, the self-assembling abilities that result in preferred architectures are presented for a broad range of polymers. In the following, we describe different strategies for sensing disease-related signals (pH-change, reductive conditions, and presence of ions or biomolecules) by polymer compartments that exhibit stimuli-responsiveness. In particular, we distinguish between the stimulus-sensitivity contributed by the polymer itself or by additional compounds embedded in the compartments in different sensing systems. We then address necessary properties of sensing polymeric compartments, such as the enhancement of their stability and biocompatibility, or the targeting ability, that open up new perspectives for diagnostic applications.

Manganese carbonyl induced cationic reversible addition–fragmentation chain transfer (C-RAFT) polymerization under visible light

Vinyl ethers were polymerized by C-RAFT polymerization on the basis of halide abstraction reaction of manganese carbonyl and organic halide.

Stereoselective cationic polymerization of vinyl ethers by easily and finely tunable titanium complexes prepared from tartrate-derived diols: isospecific polymerization and recognition of chiral side chains

Isotactic poly(vinyl ether)s were generated by titanium TADDOLates, which can be prepared from naturally abundant tartaric acid in a facile and economical manner with well-defined structures.

Polar Thermoplastics with Tunable Physical Properties Enabled by the Stereoselective Copolymerization of Vinyl Ethers

A series of isotactic, semicrystalline vinyl ether copolymers (up to 94% meso diads) were synthesized using a chiral BINOL-based phosphoric acid in combination with a titanium Lewis acid. This stereoselective cationic polymerization enabled the systematic tuning of both glass transition (T_g) and melting temperature (T_m) in copolymers derived from alkyl vinyl ethers (i.e., ethyl, butyl, isobutyl). Additionally, a vinyl ether comonomer bearing an acyl-protected alcohol was utilized as a platform for postfunctionalization. Copolymers containing the masked alcohols were shown to undergo deprotection and subsequent coupling with a desired acid chloride. Collectively, these results highlight the diverse material properties and expanded chemical space accessible through stereoselective cationic polymerization mediated by a chiral anion.