LiCl-Accelerated Multimetallic Cross-Coupling of Aryl Chlorides with Aryl Triflates

Zinc and manganese redox potentials in organic solvents and their influence on nickel-catalysed cross-electrophile coupling

Zinc and manganese are widely used as reductants in synthetic methods, such as nickel-catalysed cross-electrophile coupling (XEC) reactions, but their redox potentials are unknown in organic solvents. Here we show how open-circuit potential measurements may be used to determine the thermodynamic potentials of Zn and Mn in different organic solvents and in the presence of common reaction additives. The impact of these Zn and Mn potentials is analysed for a pair of Ni-catalysed reactions, each showing a preference for one of the two reductants. Ni-catalysed coupling of N-alkyl-2,4,6-triphenylpyridinium reagents (Katritzky salts) with aryl halides are then compared under chemical reaction conditions, using Zn or Mn reductants, and under electrochemical conditions performed at applied potentials corresponding to the Zn and Mn reduction potentials and at potentials optimized to achieve the maximum yield. The collective results illuminate the important role of reductant redox potential in Ni-catalysed XEC reactions.

Photochemical pincer-catalyzed reductive cyclisation towards indolines and oxindoles

An organophotocatalytic method has been described towards the synthesis of indolines and oxindoles starting from unusual α-chloro amide and N-(2-chlorophenyl)-N-alkyl methacrylamide substrates. This marks a notable improvement since the earlier syntheses utilized iridium and gold catalysts, and involved C-I or C-Br bond cleavage as the initial step. Our photocatalyst is a pincer ligand that can be easily deprotonated to make a very strong reducing agent. The reductive cleavage of the carbon-chloride bond, and subsequent 5-exo-trig ring cyclization, followed by hydrogen atom abstraction, prepare the desired heterocycles under very mild reaction conditions. An atom economic use of KOtBu has been shown to demonstrate the unusual trifunctional role of the latter.

Synthesis of (Hetero)biaryls via Nickel Catalyzed Reductive Cross-Electrophile Coupling Between (Hetero)aryl Iodides and Bromides

(Hetero)biaryls are fundamental building blocks in the pharmaceutical industry and rapid access to these scaffolds is imperative for the success of numerous medicinal chemistry campaigns. Herein, a highly general, mild, and chemoselective reductive cross-electrophile coupling between (hetero)aryl iodides and heteroaryl bromides is reported. By employing more reactive (hetero)aryl halides, a broad range of successful substrates (45 examples) were identified. The reaction was also found to be chemoselective for C(sp2)-C(sp2) bond formation between (hetero)aryl iodides and bromides over (hetero)aryl chlorides, which were generally inert under the described reaction conditions. The efficiency of the procedure is also further demonstrated in parallel synthesis library format, on gram scale, as well as in the formal synthesis of Ruxolitinib, a potent JAK inhibitor. As such, we anticipate this method will find widespread utility in the assembly of (hetero)biaryls for medicinal chemistry efforts.

Nickel-Catalyzed Atroposelective Cross-Electrophile Coupling of Aryl Halides: A General and Practical Route to Diverse MOP-Type Ligands

We report a highly cross- and atroposelective coupling between ortho-(chloro)arylphosphine oxides and ortho-(bromo)aryl ethers. This previously unknown asymmetric nickel-catalyzed reaction offers a direct route to highly enantioenriched axially chiral biaryl monophosphine oxides that are difficult to access by other means. These products can be readily reduced to generate chiral MOP-type ligands bearing complex skeletal backbones. The utility of these chiral ligands in asymmetric catalysis is also demonstrated.

Cobalt-catalyzed cross-electrophile coupling of alkynyl sulfides with unactivated chlorosilanes

Herein, we disclose a highly efficient cobalt-catalyzed cross-electrophile alkynylation of a broad range of unactivated chlorosilanes with alkynyl sulfides as a stable and practical alkynyl electrophiles. Strategically, employing easily synthesized alkynyl sulfides as alkynyl precursors allows access to various alkynylsilanes in good to excellent yields. Notably, this method avoids the utilization of strong bases, noble metal catalysts, high temperature and forcing reaction conditions, thus presenting apparent advantages, such as broad substrate scope (72 examples, up to 97% yield), high Csp-S chemo-selectivity and excellent functional group compatibility (Ar-X, X = Cl, Br, I, OTf, OTs). Moreover, the utilities of this method are also illustrated by downstream transformations and late-stage modification of structurally complex natural products and pharmaceuticals. Mechanistic studies elucidated that the cobalt catalyst initially reacted with alkynyl sulfides, and the activation of chlorosilanes occurred via an SN2 process instead of a radical pathway.

A radical 1,4-aryl migration enables nickel-catalysed remote cross-electrophile coupling of β-bromo amino acid esters with vinyl triflates

A radical 1,4-aryl migration enabling a cross-electrophile coupling reaction toward remote transalkylation of N-benzyl alanine has been developed. In this strategy, with the occurrence of a radical-mediated Turce-Smiles rearrangement, key α-aminoalkyl radicals are generated. The as-formed α-aminoalkyl radical serves as a robust coupling partner for cross-electrophilic coupling with vinyl triflates, affording a series of olefin-tethered amino acid motifs.

Simplifying Access to Targeted Protein Degraders via Nickel Electrocatalytic Cross-Coupling

C-C linked glutarimide-containing structures with direct utility in the preparation of cereblon-based degraders (PROTACs, CELMoDs) can be assessed in a single step from inexpensive, commercial α-bromoglutarimide through a unique Brønsted-acid assisted Ni-electrocatalytic approach. The reaction tolerates a broad array of functional groups that are historically problematic and can be applied to the simplified synthesis of dozens of known compounds that have only been procured through laborious, wasteful, multi-step sequences. The reaction is scalable in both batch and flow and features a trivial procedure wherein the most time-consuming aspect of reaction setup is weighing out the starting materials.

Ni-Catalyzed Csp2 and Csp3 Coupling for Divergent Bisboronic Ester Synthesis

Bisboronic esters are critical compounds in various research fields, including drug discovery, chemical biology, and material sciences. Currently, the bisboronic esters with reactive functional groups are difficult to synthesize; this is partially due to the lack of a robust method to produce these products with diverse structures and various functional groups at specific locations. To overcome this issue, this study introduced a Ni-catalysis approach to produce bisboronic esters efficiently via cross-coupling and homocoupling using readily available halogenated boronic esters as the starting material under mild reaction conditions. This newly developed strategy enables Csp2-Csp2, Csp3-Csp3, and Csp2-Csp3 couplings, demonstrating a broad substrate scope and excellent compatibility with various functional groups.

Iron-Catalyzed C(sp3)-C(sp3) Coupling to Construct Quaternary Carbon Centers

The construction of quaternary carbon centers via C-C coupling protocols remains challenging. The coupling of tertiary C(sp3) with secondary or tertiary C(sp3) counterparts has been hindered by pronounced steric clashes and many side reactions. Herein, we have successfully developed a type of bisphosphine ligand iron complex-catalyzed coupling reactions of tertiary alkyl halides with secondary alkyl zinc reagents and efficiently realized the coupling reaction between tertiary C(sp3) and secondary C(sp3) with high selectivity for the initial instance, which provided an efficient method for the construction of quaternary carbon centers with high steric hindrance. The combination of an iron catalyst and directing group of the substrate makes the great challenging transformation possible.

Thermal Nickel-Catalyzed N-Arylation of NH-Sulfoximines with (Hetero)aryl Chlorides Enabled by PhPAd-DalPhos Ligation

We report a versatile method for cross-coupling of NH-sulfoximines with (hetero)aryl chlorides, as well as bromide and sulfonate electrophiles, that makes use of the air-stable, commercial precatalyst (PhPAd-DalPhos)Ni(o-tol)Cl. Under optimized conditions a diverse electrophile scope is established, including the N-arylation of the pharmaceutical Clozapine. While 5 mol % Ni and 80 °C are commonly employed in this chemistry, successful examples utilizing 1 mol % Ni and/or 25 °C are presented. Competition experiments establish the superiority of NH-sulfoximine over primary sulfonamide as nucleophiles under these conditions.

Nickel-Catalyzed C(sp3)-Sb Coupling of Chlorostibines with Unactivated Alkyl Chlorides and In Vitro Anticancer Activity of Products

In this study, we present a nickel-catalyzed reductive C(sp3)-Sb coupling of unactivated alkyl chlorides with chlorostibines. This approach is highly versatile, tolerating various functional groups such as acetal, alkene, nitrile, amine, ester, silyl ether, thioether, and various heterocyclic compounds. Notably, the late-stage modification of bioactive molecules and the satisfactory anticancer activity against cancerous MDA-MB-231 also demonstrate the potential application.

Cobalt-Catalyzed Electroreductive Alkylation of Unactivated Alkyl Chlorides with Conjugated Olefins

Reactions of unactivated alkyl chlorides under mild and sustainable conditions are rare compared to those of alkyl bromides or iodides. As a result, synthetic methods capable of modifying the vast chemical space of chloroalkane reagents, wastes, and materials are limited. We report the cobalt-catalyzed reductive addition of unactivated alkyl chlorides to conjugated alkenes. Co-catalyzed activation of alkyl chlorides is performed under electroreductive conditions, and the resulting reactions constitute formal alkyl-alkyl bond formation. In addition to developing an operationally simple methodology, detailed mechanistic studies provide insights into the elementary steps of a proposed catalytic cycle. In particular, we propose a switch in the mechanism of C-Cl bond activation from nucleophilic substitution to halogen atom abstraction, which is critical for efficiently generating alkyl radicals. These mechanistic insights were leveraged in designing ligands that enable couplings of primary, secondary, and tertiary alkyl chlorides.

Reductive Cross-Coupling of a Vinyl Thianthrenium Salt and Secondary Alkyl Iodides

We report the first reductive vinylation of alkyl iodides. The reaction uses a vinyl thianthrenium salt, a palladium catalyst, and an alkyl zinc intermediate formed in situ to trap the Ln PdII (vinyl) complex formed after oxidative addition before it undergoes undesired homocoupling to form butadiene.

Manganese-promoted reductive cross-coupling of disulfides with dialkyl carbonates

Manganese is a cheap and environmentally friendly metal on Earth. Herein, we report a manganese-promoted reductive cross-coupling using easily available and odorless disulfides as thiolating agents in an excellent 100% sulfur atom economy. The protocol featured a broad substrate scope, including various alkyl disulfides and excellent functional group compatibility, constructing diverse thioethers under simple conditions. Ultimately, thioethers can be prepared in gram-scale reactions and further transformed into structurally complex molecules.

Total Synthesis of (-)-Batrachotoxin Enabled by a Pd/Ag-Promoted Suzuki-Miyaura Coupling Reaction

Batrachotoxin is an extremely potent cardio- and neurotoxic steroidal alkaloid found in certain species of frogs, birds, and beetles. The steroidal 6/6/6/5-membered carbocycle (ABCD-ring) is U-shaped and functionalized with two double bonds, a six-membered C3-hemiacetal across the AB-ring, a seven-membered oxazepane on the CD-ring, and a dimethylpyrrolecarboxy group at the D-ring carbon chain. These structural features present an unusual and formidable synthetic challenge. Herein we report a total synthesis of batrachotoxin based on a newly devised convergent strategy through a 22-step sequence. Enantiopure AB-ring and D-ring fragments were prepared and subjected to a crucial C(sp2 )-C(sp2 ) coupling reaction. Although both C(sp2 ) centers were sterically encumbered by proximal tetrasubstituted carbon atoms, Ag2 O strongly promoted the Pd(PPh3 )4 -catalyzed Suzuki-Miyaura coupling reaction at room temperature, thereby connecting the two fragments without damaging their preexisting functionalities. Subsequent treatment with t-BuOK induced Dieckmann condensation to cyclize the C-ring. The judiciously optimized functionalizations realized oxazepane formation, carbon chain extension, and pyrrole carboxylic acid condensation to deliver batrachotoxin.

Photoredox catalysis harvesting multiple photon or electrochemical energies

Photoredox catalysis (PRC) is a cutting-edge frontier for single electron-transfer (SET) reactions, enabling the generation of reactive intermediates for both oxidative and reductive processes via photon activation of a catalyst. Although this represents a significant step towards chemoselective and, more generally, sustainable chemistry, its efficacy is limited by the energy of visible light photons. Nowadays, excellent alternative conditions are available to overcome these limitations, harvesting two different but correlated concepts: the use of multi-photon processes such as consecutive photoinduced electron transfer (conPET) and the combination of photo- and electrochemistry in synthetic photoelectrochemistry (PEC). Herein, we review the most recent contributions to these fields in both oxidative and reductive activations of organic functional groups. New opportunities for organic chemists are captured, such as selective reactions employing super-oxidants and super-reductants to engage unactivated chemical feedstocks, and scalability up to gram scales in continuous flow. This review provides comparisons between the two techniques (multi-photon photoredox catalysis and PEC) to help the reader to fully understand their similarities, differences and potential applications and to therefore choose which method is the most appropriate for a given reaction, scale and purpose of a project.

Harnessing Sulfur(VI) Fluoride Exchange Click Chemistry and Photocatalysis for Deaminative Benzylic Arylation

While among the most common functional handles present in organic molecules, amines are a widely underutilized linchpin for C-C bond formation. To facilitate C-N bond cleavage, large activating groups are typically used but result in the generation of stoichiometric amounts of organic waste. Herein, we report an atom-economic activation of benzylic primary amines relying on the Sulfur(VI) Fluoride Exchange (SuFEx) click chemistry and the aza-Ramberg-Bäcklund reaction. This two-step sequence allows the high-yielding generation of 1,2-dialkyldiazenes from primary amines via loss of SO2. Excitation of the diazenes with blue light and an Ir photocatalyst affords radical pairs upon expulsion of N2, which can be coaxed into the formation of C(sp3)-C(sp2) bonds upon diffusion and capture by a Ni catalyst. This arylative strategy relying on a traceless click approach was harnessed in a variety of examples and its mechanism was investigated.

Formal Cross-Coupling of Amines and Carboxylic Acids to Form sp3-sp2 Carbon-Carbon Bonds

Amines and carboxylic acids are abundant synthetic building blocks that are classically united to form an amide bond. To access new pockets of chemical space, we are interested in the development of amine-acid coupling reactions that complement the amide coupling. In particular, the formation of carbon-carbon bonds by formal deamination and decarboxylation would be an impactful addition to the synthesis toolbox. Here, we report a formal cross-coupling of alkyl amines and aryl carboxylic acids to form C(sp3)-C(sp2) bonds following preactivation of the amine-acid building blocks as a pyridinium salt and N-acyl-glutarimide, respectively. Under nickel-catalyzed reductive cross-coupling conditions, a diversity of simple and complex substrates are united in good to excellent yield, and numerous pharmaceuticals are successfully diversified. High-throughput experimentation was leveraged in the development of the reaction and the discovery of performance-enhancing additives such as phthalimide, RuCl3, and GaCl3. Mechanistic investigations suggest phthalimide may play a role in stabilizing productive Ni complexes rather than being involved in oxidative addition of the N-acyl-imide and that RuCl3 supports the decarbonylation event, thereby improving reaction selectivity.

Protodemetalation of (Bipyridyl)Ni(II)-Aryl Complexes Shows Evidence for Five-, Six-, and Seven-Membered Cyclic Pathways

Protonation of C-M bonds and its microscopic reverse, metalation of C-H bonds, are fundamental steps in a variety of metal-catalyzed processes. As such, studies on protonation of C-M bonds can shed light on C-H activation. We present here studies on the rate of protodemetalation (PDM) of a suite of arylnickel(II) complexes with various acids that provide evidence for a concerted, cyclic transition state for the PDM of C-Ni bonds and demonstrate that five-, six-, and seven-membered transition states are particularly favorable. Our data show that while the rate of protodemetalation of arylnickel(II) complexes scales with acidity for many acids, several are faster than predicted by pKa. For example, while acetic acid and acetohydroxamic acid are much less acidic than HCl, they both protodemetalate arylnickel(II) complexes significantly faster than HCl. Our data also show how in the case of acetohydroxamic acid, a seven-membered cyclic transition state (CH3C(O)NHOH) can be more favorable than a six-membered transition state (CH3C(O)NHOH). Similarly, five-membered transition states, such as for pyrazole, are highly favorable as well. Comparison of transition state polarization (from density functional theory) compares these new nickel transition states to better-studied precious-metal systems and demonstrates how the base can change the polarization of the transition state giving rise to opposing electronic preferences. Collectively, these studies suggest several new avenues for study in C-H activation as well as approaches to accelerate or slow protodemetalation in nickel catalysis.

Nickel-Catalyzed Enantioselective Reductive Arylation and Heteroarylation of Aldimines via an Elementary 1,4-Addition

Nickel catalysts of chiral pyrox ligands promoted enantioselective reductive arylation and heteroarylation of aldimines, using directly (hetero)aryl halides and sulfonates. The catalytic arylation can also be conducted with crude aldimines generated from condensation of aldehydes and azaaryl amines. Mechanistically, density functional theory (DFT) calculations and experiments pointed to an elementary step of 1,4-addition of aryl nickel(I) complexes to N-azaaryl aldimines.

Multimetallic-Catalyzed C-C Bond-Forming Reactions: From Serendipity to Strategy

The use of two or more metal catalysts in a reaction is a powerful synthetic strategy to access complex targets efficiently and selectively from simple starting materials. While capable of uniting distinct reactivities, the principles governing multimetallic catalysis are not always intuitive, making the discovery and optimization of new reactions challenging. Here, we outline our perspective on the design elements of multimetallic catalysis using precedent from well-documented C-C bond-forming reactions. These strategies provide insight into the synergy of metal catalysts and compatibility of the individual components of a reaction. Advantages and limitations are discussed to promote further development of the field.

Nickel-Catalyzed Direct Cross-Coupling of Aryl Thioether with Aryl Bromide

A straightforward cross-coupling of aryl thioether with aryl bromide with the aid of nickel salt, magnesium, and lithium chloride in tetrahydrofuran at ambient temperature was accomplished. The one-pot reactions proceeded efficiently via C-S bond cleavage to produce the desired biaryls in modest to good yields, avoiding the use of pregenerated or commercial organometallic reagents.

Nickel-Catalyzed Reductive Iminoarylation of Oxime Ester-Tethered Alkenes: Rapid Entrance to Diverse Functionalized Pyrrolines

Herein, we disclose a general and practical iminoarylation of alkenes by nickel-catalyzed reductive cross-coupling of unsaturated oxime esters with readily available aryl halides, providing an expedient approach for constructing pyrroline derivatives. The absence of organometallic reagents enables the reaction to occur under mild conditions with a broad substrate scope and good functional group tolerance. Moreover, other C-based electrophiles, including alkenyl, alkynyl and alkyl halides, or pseudohalides, were also competent substrates for this reaction.

Ni- and Ni/Pd-Catalyzed Reductive Coupling of Lignin-Derived Aromatics to Access Biobased Plasticizers

Lignin-derived aromatic chemicals offer a compelling alternative to petrochemical feedstocks, and new applications are the focus of extensive interest. 4-Hydroxybenzoic acid (H), vanillic acid (G), and syringic acid (S) are readily obtained via oxidative depolymerization of hardwood lignin substrates. Here, we explore the use of these compounds to access biaryl dicarboxylate esters that represent biobased, less toxic alternatives to phthalate plasticizers. Chemical and electrochemical methods are developed for catalytic reductive coupling of sulfonate derivatives of H, G, and S to access all possible homo- and cross-coupling products. A conventional NiCl₂/bipyridine catalyst is able to access the H-H and G-G products, but new catalysts are identified to afford the more challenging coupling products, including a NiCl₂/bisphosphine catalyst for S-S and a NiCl₂/phenanthroline/PdCl₂/phosphine cocatalyst system for H-G, H-S, and G-S. High-throughput experimentation methods with a chemical reductant (Zn powder) are shown to provide an efficient screening platform for identification of new catalysts, while electrochemical methods can access improved yields and/or facilitate implementation on larger scale. Plasticizer tests are performed with poly(vinyl chloride), using esters of the 4,4'-biaryl dicarboxylate products. The H-G and G-G derivatives, in particular, exhibit performance advantages relative to an established petroleum-based phthalate ester plasticizer.

Comparative Screening of DalPhos/Ni Catalysts in C-N Cross-couplings of (Hetero)aryl Chlorides Enables Development of Aminopyrazole Cross-couplings with Amine Base

A systematic competitive evaluation of the DalPhos ligand family in nickel-catalyzed N-arylation chemistry is reported, involving primary (linear and branched) and secondary alkylamines, as well as a primary five-membered heteroarylamine (aminopyrazole), in combination with a diverse set of test electrophiles and bases (NaOtBu, K₂ CO₃ , DBU/NaTFA). In addition to providing optimal ligand/catalyst identification, and bringing to light methodology limitations (e. g., unwanted C-O cross-coupling with NaOtBu), our survey enabled the development of the first efficient catalyst system for heteroatom-dense C-N cross-coupling of aminopyrazoles and related nucleophiles with (hetero)aryl chlorides by use of an amine 'dual-base' system.

Stereospecific nickel-catalyzed [4+2] heteroannulation of alkynes with aminophosphanes

Enantioenriched phosphorus compounds play crucial roles in many fields ranging from catalyst to materials science to drug development. Despite advances in the construction of phosphacycles, incorporation of a P-chirogenic center into heterocycles remains challenging. Here, we report an effective method for the preparation of phosphacycles through nickel-catalyzed [4+2] heteroannulation of internal alkynes with aminophosphanes derived from o-haloanilines. Notably, chiral 2-λ5-phosphaquinolines can be prepared from P-stereogenic substrates via NH/PH tautomeric equilibrium without loss of stereochemical integrity. The strategy is found to exhibit a broad scope in terms of both reaction components, enabling modular construction of libraries of 2-λ5-phosphaquinolines with different steric and electronic properties for fine-tuning photophysical properties, where some of these compounds showed distinct fluorescence with high quantum yields. A series of mechanistic studies further shed light on the pathway of the heteroannulation and reasons for stereospecificity.

Direct Synthesis of α-Aryl-α-Trifluoromethyl Alcohols via Nickel Catalyzed Cross-Electrophile Coupling

A nickel-catalyzed reductive cross-electrophile coupling between the redox-active N-trifluoroethoxyphthalimide and iodoarenes is documented. The protocol reproduces a formal arylation of trifluoroacetaldehyde under mild conditions in high yields (up to 88 %) and with large functional group tolerance (30 examples). A combined computational and experimental investigation revealed a pivotal solvent assisted 1,2-Hydrogen Atom Transfer (HAT) process to generate a nucleophilic α-hydroxy-α-trifluoromethyl C-centered radical for the Csp2 -Csp3 bond forming process.

C(sp2)-C(sp2) Reductive Cross-Coupling of Triarylphosphines with Aryl Halides by Palladium/Nickel Co-catalysis

Herein, we report the first general C(sp²)-C(sp²) reductive cross-coupling reaction of diverse triarylphosphines with a wide range of aryl halides by palladium/nickel co-catalysis. This protocol offers a unique route for the synthesis of biaryl compounds via the activation of inert C(Ar)-P bonds. The mechanistic studies demonstrate that the formation of the phosphonium salts in situ plays a key role in the catalytic cycle.

Homogeneous Organic Electron Donors in Nickel-Catalyzed Reductive Transformations

Many contemporary organic transformations, such as Ni-catalyzed cross-electrophile coupling (XEC), require a reductant. Typically, heterogeneous reductants, such as Zn0 or Mn0, are used as the electron source in these reactions. Although heterogeneous reductants are highly practical for preparative-scale batch reactions, they can lead to complications in performing reactions on process scale and are not easily compatible with modern applications, such as flow chemistry. In principle, homogeneous organic reductants can address some of the challenges associated with heterogeneous reductants and also provide greater control of the reductant strength, which can lead to new reactivity. Nevertheless, homogeneous organic reductants have rarely been used in XEC. In this Perspective, we summarize recent progress in the use of homogeneous organic electron donors in Ni-catalyzed XEC and related reactions, discuss potential synthetic and mechanistic benefits, describe the limitations that inhibit their implementation, and outline challenges that need to be solved in order for homogeneous organic reductants to be widely utilized in synthetic chemistry. Although our focus is on XEC, our discussion of the strengths and weaknesses of different methods for introducing electrons is general to other reductive transformations.

Oriented internal electrostatic fields: an emerging design element in coordination chemistry and catalysis

The power of oriented electrostatic fields (ESFs) to influence chemical bonding and reactivity is a phenomenon of rapidly growing interest. The presence of strong ESFs has recently been implicated as one of the most significant contributors to the activity of select enzymes, wherein alignment of a substrate's changing dipole moment with a strong, local electrostatic field has been shown to be responsible for the majority of the enzymatic rate enhancement. Outside of enzymology, researchers have studied the impacts of "internal" electrostatic fields via the addition of ionic salts to reactions and the incorporation of charged functional groups into organic molecules (both experimentally and computationally), and "externally" via the implementation of bulk fields between electrode plates. Incorporation of charged moieties into homogeneous inorganic complexes to generate internal ESFs represents an area of high potential for novel catalyst design. This field has only begun to materialize within the past 10 years but could be an area of significant impact moving forward, since it provides a means for tuning the properties of molecular complexes via a method that is orthogonal to traditional strategies, thereby providing possibilities for improved catalytic conditions and novel reactivity. In this perspective, we highlight recent developments in this area and offer insights, obtained from our own research, on the challenges and future directions of this emerging field of research.

Ligand-Based Control of Nickel Catalysts: Switching Chemoselectivity from One-Electron to Two-Electron Pathways in Competing Reactions of 4-Halotetrahydropyrans

Development of nickel-catalyzed transformations would be facilitated by an improved ability to predict which ligands promote and suppress competing mechanisms. We evaluate ligand-based modulation of catalyst preference for one- or two-electron pathways employing 4-halotetrahydropyrans as model substrates that can undergo divergent reaction pathways. Chemoselectivity for one- or two-electron oxidative addition is predicted by ligand class. Phosphine-ligated nickel catalysts favor closed-shell oxidative addition. In contrast, nitrogen-ligated nickel catalysts prefer the one-electron pathway, initiating with halogen atom transfer.

Coupling of Heteroaryl Halides with Chlorodifluoroacetamides and Chlorodifluoroacetate by Nickel Catalysis

A nickel-catalyzed cross-coupling of heteroaryl halides with chlorodifluoroacetamides and chlorodifluoroacetate has been developed. The combination of NiCl₂  ⋅ DME with 4,4'-diNon-bpy, co-ligand PPh₃ , and additive LiCl renders the catalytic system efficient for the synthesis of medicinal interest heteroaryldifluoroacetamides. The application of the method leads to short and highly efficient synthesis of biologically active molecules, providing a facile route for applications in medicinal chemistry and agrochemistry.