Enhanced Gas Uptake in a Microporous Metal-Organic Framework via a Sorbate Induced-Fit Mechanism

Synthesis of cuprous iodide coordination polymers using pyridine carbohydrazide as ligands and their application in drug detection

Two coordination polymers named α-Copper(I) Iodide-3-pyridinecarbohydrazide (α-CuI-m-iah) and β-Copper(I) Iodide-3-pyridinecarbohydrazide (β-CuI-m-iah) with varying crystal structures and tunable emission wavelengths were obtained by adjusting the ligand (3-pyridinecarbohydrazide, m-iah) -to-metal clusters (CuI) ratio during the preparation process. α-CuI-m-iah was employed for the fluorescence detection of pesticide residues flumetralin, which demonstrated high selectivity, strong resistance to interference, and a wide linear detection range (1 μM-600 μM). It also exhibited a low detection limit (0.49 μM) and a fast response time, making it effective for detecting flumetralin in water samples with recovery rates ranging from 90.53 % to 97.13 %. The detection mechanism involved competitive absorption and fluorescence resonance energy transfer (FRET) between flumetralin and α-CuI-m-iah, resulting in a decrease in fluorescence intensity. This work not only introduces two coordination polymers with tunable emission behaviors but also highlights their potential for applications in pesticide residue detection.

A Metal-Organic Framework with Tailored Shape-Matched Interactions Towards Ambient-Temperature Argon Removal for Oxygen Purification

High-purity oxygen (O2) is essential for high-value-added applications in the medical, aerospace, and electronics sectors. The production of high-purity O2 via non-thermal-driven pressure-swing adsorption has the advantages of portable operation and low energy consumption. However, effectively removing trace amounts of argon (Ar) impurities in this process is indispensable, and it is a fundamental challenge to achieve the preferential adsorption of inert Ar atoms over polar O2 molecules instead of traditional thermodynamic or molecule sieving strategies. Herein, we have demonstrated this problem was addressed by integrating spheroidal shape-matched interactions to fit the spheroid Ar atoms while repulsing the linear O2 molecules. Using this strategy, customized TYUT-20 enables the exceptional recognition of Ar atoms over O2 molecules, demonstrating an unprecedented Ar adsorption capacity of up to 14.5 cm3 g-1 and a top-performing Ar/O2 (1.54) selectivity at 298 K and 1 bar. The Ar atom recognition mechanism on this adsorbent has been investigated using Ar-loaded single crystal diffraction analysis and molecular simulation studies. The productivity of high-purity O2 (>99.99%) from a 5/95 Ar/O2 mixture breakthrough experiment reached 6.6 L kg-1 under ambient conditions, which highlighted TYUT-20 as a very promising adsorbent in ready-to-use high-purity O2 production.

Machine learning-assisted study on the thermal transport properties of two-dimensional M3(C6O6)2(M = Fe, Co, Ni) materials

Two-dimensional metal-organic frameworks (MOF) are widely used in electronic devices and energy storage due to their large surface area, abundant active sites, and tunable sizes. A deeper understanding of the thermal transport properties of two-dimensional MOF materials is essential for these applications. In this work, we systematically studied the thermal transport properties of M3(C6O6)2(M = Fe, Co, Ni) by using a machine learning interatomic potential method combined with the phonon Boltzmann transport equation. The results show that the lattice thermal conductivities of Fe3(C6O6)2, Co3(C6O6)2, and Ni3(C6O6)2at room temperature are 4.0 W mK-1, 5.5 W mK-1, and 5.8 W mK-1, respectively. The differences in thermal conductivity primarily arise from variations in phonon relaxation times, which can be elucidated by examining the three-phonon scattering phase space. Further analysis of bond strengths reveals that the strong bonding between Fe and O impedes phonon propagation through the oxygen atoms, resulting in lower lattice thermal conductivity. Our work provides a fundamental reference for understanding thermal transport in two-dimensional MOF.

Recent advances in nanoporous organic polymers (NPOPs) for hydrogen storage applications

Nanoporous organic polymers (NPOPs) have emerged as versatile materials with robust thermal stability, large surface area (up to 2500 m2 g-1), and customizable porosity, making them ideal candidates for advanced hydrogen (H2) storage applications. This review provides a comprehensive analysis of various NPOPs, including covalent organic frameworks (COFs), hypercrosslinked polymers (HCLPs), conjugated microporous polymers (CMPs), and porous aromatic frameworks (POAFs). Notably, these materials demonstrate superior H2 storage capacities, achieving up to 10 wt% at cryogenic temperatures, which is essential for applying H2 as a clean energy carrier. The review also highlights recent advancements, such as integrating metal-organic frameworks (MOFs) into NPOPs, further enhancing storage capacities by up to 30%. Their multifaceted properties underpin various applications, from fuel storage and gas separation to water treatment and optical devices. This review explores the significance and versatility of NPOPs in H2 storage due to their unique properties and enhanced storage capacities. Additionally, recent advancements in utilizing NPOPs for H2 storage are highlighted with a detailed discussion of emerging trends and the synthesis of innovative NPOPs. The review concludes with a discussion of the advantages, applications, challenges, research, and future directions for research in this area.

Adsorptive-dissolution of O2 into the potential nanospace of a densely fluorinated metal-organic framework

Nanoporous solids, including metal-organic frameworks (MOFs), have long been known to capture small molecules by adsorption on their pore surfaces. Liquids are also known to accommodate small molecules by dissolution. These two processes have been recognized as fundamentally distinct phenomena because of the different nature of the medium-solids and liquids. Here, we report a dissolution-like gas accommodation so-called "adsorptive-dissolution" behavior in a MOF (PFAC-2) with pores densely filled with perfluoroalkyl chains. PFAC-2 does not have solvent-accessible voids; nevertheless, it captures oxygen molecules without changing the framework structure, analogous to molecular dissolution into liquids. Moreover, we demonstrate the selective capture of O2 by PFAC-2 in a mixture of O2 and Ar, which are difficult to separate due to their similarities such as boiling point and molecular size. Our results show the integration of molecular adsorption into nanospaces and dissolution into fluorous solvents, which can guide the design of crystalline adsorbents for selective molecular trapping and gas separation.

Efficient Fluorocarbons Capture Using Radical-Containing Covalent Triazine Frameworks

Efficiently capturing fluorocarbons, potent greenhouse gases with high global warming potentials (GWP), remains a daunting challenge due to limited effective approaches for constructing high-performance adsorbents. To tackle this issue, we have pioneered a novel strategy of developing radical porous materials as effective adsorbents for fluorocarbon capture. The resulting radical covalent triazine framework (CTF), CTF-azo-R, shows exceptional fluorocarbon (perfluorohexane, a representative model pollutant among fluorocarbons) uptake capacity of 270 wt %, a record-high value among all porous materials reported to date. Spectral characteristics, experimental studies, and theoretical calculations indicate that the presence of stable radicals in CTF-azo-R contributes to its superior fluorocarbon capture performance. Furthermore, CTF-azo-R demonstrates exceptionally high chemical and thermal stabilities that fully meet the requirements for practical applications in diverse environments. Our work not only establishes radical CTF-azo-R as a promising candidate for fluorocarbon capture but also introduces a novel approach for constructing advanced fluorocarbon adsorbents by incorporating radical sites into porous materials. This strategy paves the way for the development of radical adsorbents, fostering advancements in both fluorocarbon capture and the broader field of adsorption and separation.

Flexible Metal-Organic Frameworks: From Local Structural Design to Functional Realization

ConspectusFlexible metal-organic frameworks (MOFs), also known as soft porous crystals, exhibit dynamic behaviors in response to external physical and chemical stimuli such as light, heat, electric or magnetic field, or the presence of particular matters, on the premise of maintaining their crystalline state. The reversible structural transformation of flexible MOFs, a unique characteristic seldomly found in other types of known solid-state materials, affords them distinct properties in the realms of molecule separation, optoelectronic devices, chemical sensing, information storage, biomedicine applications, and so on. The mechanisms underlying their dynamic behaviors can be comprehensively investigated at the molecular level by means of in situ single-crystal or powder X-ray diffraction as well as other in situ spectroscopic techniques due to the high regularity of these crystalline materials during stimuli-responsive phase transitions. Through the introduction of specific stimuli-responsive groups/moieties into the well-defined and ordered molecular arrays, targeted applications can be achieved, and the performance of flexible MOFs can also be further improved via rational structural design.In this Account, we summarize our progress on the design, synthesis, and applications of flexible MOFs over the past few years. First, we highlight the construction principle of flexible MOFs, emphasizing the pivotal role of local structural design. Using an F-modified ligand, a flexible MOF with remarkable structural transformations can be obtained; the regulation of the metal coordination environment and interpenetrating frameworks is also crucial for achieving flexible MOFs. We also propose a strong correlation strategy based on the supramolecular interactions between the guest molecules and the framework, which realizes the temperature-responsive dynamic spatial "open-closed" regulation. Mechanisms of the dynamic behaviors investigated by the in situ techniques were also presented for the obtained materials. Second, some representative specific applications of the newly developed dynamic coordination systems were reviewed. The gas molecule responsive flexible MOFs show efficient short-chain alkane separation properties with discriminatory sorption behavior toward similar gaseous substrates. Smart sensing of temperature, pressure, and volatile organic compounds was achieved by several novel flexible fluorescent MOFs, with optimization potential through state-of-the-art chemical design. Furthermore, multiferroic materials with multiple bistable states and high working temperatures were also obtained based on flexible MOFs.Finally, we provide a discussion of the challenges of flexible MOFs in future research, including precise and efficient synthesis, in-depth structure-property relationship investigation, performance optimization, and industrialization. We hope that this Account will stimulate further research interest in developing next-generation smart materials based on flexible MOFs for applications in challenging chemical separation, extreme environmental sensing, massive information storage, and beyond.

Optimizing Iodine Enrichment through Induced-Fit Transformations in a Flexible Ag(I)-Organic Framework: From Accelerated Adsorption Kinetics to Record-High Storage Density

Efficient capture and storage of radioactive I2 is a prerequisite for developing nuclear power but remains a challenge. Here, two flexible Ag-MOFs (FJI-H39 and 40) with similar active sites but different pore sizes and flexibility are prepared; both of them can capture I2 with excellent removal efficiencies and high adsorption capacities. Due to the more flexible pores, FJI-H39 not only possesses the record-high I2 storage density among all the reported MOFs but also displays a very fast adsorption kinetic (124 times faster than FJI-H40), while their desorption kinetics are comparable. Mechanistic studies show that FJI-H39 can undergo induced-fit transformations continuously (first contraction then expansion), making the adsorbed iodine species enrich near the Ag(I) nodes quickly and orderly, from discrete I- anion to the dense packing of various iodine species, achieving the very fast adsorption kinetic and the record-high storage density simultaneously. However, no significant structural transformations caused by the adsorbed iodine are observed in FJI-H40. In addition, FJI-H39 has excellent stability/recyclability/obtainability, making it a practical adsorbent for radioactive I2. This work provides a useful method for synthesizing practical radioactive I2 adsorbents.

An adsorbate biased dynamic 3D porous framework for inverse CO2 sieving over C2H2

Separating carbon dioxide (CO2) from acetylene (C2H2) is one of the most critical and complex industrial separations due to similarities in physicochemical properties and molecular dimensions. Herein, we report a novel Ni-based three-dimensional framework {[Ni4(μ3-OH)2(μ2-OH2)2(1,4-ndc)3](3H2O)}n (1,4-ndc = 1,4-naphthalenedicarboxylate) with a one-dimensional pore channel (3.05 × 3.57 Å2), that perfectly matches with the molecular size of CO2 and C2H2. The dehydrated framework shows structural transformation, decorated with an unsaturated Ni(ii) centre and pendant oxygen atoms. The dynamic nature of the framework is evident by displaying a multistep gate opening type CO2 adsorption at 195, 273, and 298 K, but not for C2H2. The real time breakthrough gas separation experiments reveal a rarely attempted inverse CO2 selectivity over C2H2, attributed to open metal sites with a perfect pore aperture. This is supported by crystallographic analysis, in situ spectroscopic inspection, and selectivity approximations. In situ DRIFTS measurements and DFT-based theoretical calculations confirm CO2 binding sites are coordinatively unsaturated Ni(ii) and carboxylate oxygen atoms, and highlight the influence of multiple adsorption sites.

Fine-regulation of gradient gate-opening in nanoporous crystals for sieving separation of ternary C3 hydrocarbons

The adsorptive separation of ternary propyne (C3H4)/propylene (C3H6)/propane (C3H8) mixtures is of significant importance due to its energy efficiency. However, achieving this process using an adsorbent has not yet been accomplished. To tackle such a challenge, herein, we present a novel approach of fine-regulation of the gradient of gate-opening in soft nanoporous crystals. Through node substitution, an exclusive gate-opening to C3H4 (17.1 kPa) in NTU-65-FeZr has been tailored into a sequential response of C3H4 (1.6 kPa), C3H6 (19.4 kPa), and finally C3H8 (57.2 kPa) in NTU-65-CoTi, of which the gradient framework changes have been validated by in situ powder X-ray diffractions and modeling calculations. Such a significant breakthrough enables NTU-65-CoTi to sieve the ternary mixtures of C3H4/C3H6/C3H8 under ambient conditions, particularly, highly pure C3H8 (99.9%) and C3H6 (99.5%) can be obtained from the vacuum PSA scheme. In addition, the fully reversible structural change ensures no loss in performance during the cycling dynamic separations. Moving forward, regulating gradient gate-opening can be conveniently extended to other families of soft nanoporous crystals, making it a powerful tool to optimize these materials for more complex applications.

Ethane/Ethylene Separations in Flexible Diamondoid Coordination Networks via an Ethane-Induced Gate-Opening Mechanism

Separating ethane (C2H6) from ethylene (C2H4) is an essential and energy-intensive process in the chemical industry. Here, we report two flexible diamondoid coordination networks, X-dia-1-Ni and X-dia-1-Ni0.89Co0.11, that exhibit gate-opening between narrow-pore (NP) and large-pore (LP) phases for C2H6, but not for C2H4. X-dia-1-Ni0.89Co0.11 thereby exhibited a type F-IV isotherm at 273 K with no C2H6 uptake and a high uptake (111 cm3 g-1, 1 atm) for the NP and LP phases, respectively. Conversely, the LP phase exhibited a low uptake of C2H4 (12.2 cm3 g-1). This C2H6/C2H4 uptake ratio of 9.1 for X-dia-1-Ni0.89Co0.11 far surpassed those of previously reported physisorbents, many of which are C2H4-selective. In situ variable-pressure X-ray diffraction and modeling studies provided insight into the abrupt C2H6-induced structural NP to LP transformation. The promise of pure gas isotherms and, more generally, flexible coordination networks for gas separations was validated by dynamic breakthrough studies, which afforded high-purity (99.9%) C2H4 in one step.

Flexible Microporous Framework for One-Step Acquisition of Ethylene from Ternary C2 Hydrocarbons

One-step purification of ethylene (C2H4) from ternary C2 hydrocarbon mixtures is a crucial task and an enduring challenge because of their similar molecular size and physical properties. Owing to their intriguing structural dynamics, flexible MOFs have attracted more attention for gas adsorption and separation. Herein, we report a flexible MOF FJI-W-66 that exhibits rarely seen "breathing" behaviors for C2 hydrocarbons. Upon activation, the channels of guest-free FJI-W-66a significantly contract to a nearly closed-pore state. FJI-W-66a shows the stepwise adsorption isotherms for C2 hydrocarbons, which suggests the occurrence of structural transformation between less open and more open phases. Breakthrough experiments provide evidence that FJI-W-66a can selectively separate C2H4 from C2H2/C2H4/C2H6 mixtures with different ratios under ambient conditions, realizing the one-step acquisition of C2H4 from ternary C2 hydrocarbons.

Hydrocarbon Sorption in Flexible MOFs-Part III: Modulation of Gas Separation Mechanisms

Single gas sorption experiments with the C4-hydrocarbons n-butane, iso-butane, 1-butene and iso-butene on the flexible MOFs Cu-IHMe-pw and Cu-IHEt-pw were carried out with both thermodynamic equilibrium and overall sorption kinetics. Subsequent static binary gas mixture experiments of n-butane and iso-butane unveil a complex dependence of the overall selectivity on sorption enthalpy, rate of structural transition as well as steric effects. A thermodynamic separation favoring iso-butane as well as kinetic separation favoring n-butane are possible within Cu-IHMe-pw while complete size exclusion of iso-butane is achieved in Cu-IHEt-pw. This proof-of-concept study shows that the structural flexibility offers additional levers for the precise modulation of the separation mechanisms for complex mixtures with similar chemical and physical properties with real selectivities of >10.

Shape-Memory Effect Enabled by Ligand Substitution and CO2 Affinity in a Flexible SIFSIX Coordination Network

We report that linker ligand substitution involving just one atom induces a shape-memory effect in a flexible coordination network. Specifically, whereas SIFSIX-23-Cu, [Cu(SiF6 )(L)2 ]n , (L=1,4-bis(1-imidazolyl)benzene, SiF6 2- =SIFSIX) has been previously reported to exhibit reversible switching between closed and open phases, the activated phase of SIFSIX-23-CuN , [Cu(SiF6 )(LN )2 ]n (LN =2,5-bis(1-imidazolyl)pyridine), transformed to a kinetically stable porous phase with strong affinity for CO2 . As-synthesized SIFSIX-23-CuN , α, transformed to less open, γ, and closed, β, phases during activation. β did not adsorb N2 (77 K), rather it reverted to α induced by CO2 at 195, 273 and 298 K. CO2 desorption resulted in α', a shape-memory phase which subsequently exhibited type-I isotherms for N2 (77 K) and CO2 as well as strong performance for separation of CO2 /N2 (15/85) at 298 K and 1 bar driven by strong binding (Qst =45-51 kJ/mol) and excellent CO2 /N2 selectivity (up to 700). Interestingly, α' reverted to β after re-solvation/desolvation. Molecular simulations and density functional theory (DFT) calculations provide insight into the properties of SIFSIX-23-CuN .

Significance of MOF adsorbents in uranium remediation from water

Uranium is considered as one of the most perilous radioactive contaminants in the aqueous environment. It has shown detrimental effects on both flora and fauna and because of its toxicities on human beings, therefore its exclusion from the aqueous environment is very essential. The utilization of metal-organic frameworks (MOFs) as an adsorbent for the removal of uranium from the aqueous environment could be a good approach. MOFs possess unique properties like high surface area, high porosity, adjustable pore size, etc. This makes them promising adsorbents for the removal of uranium from contaminated water. In this paper, sources of uranium in the water environment, human health disorders, and application of the different types of MOFs as well as the mechanisms of uranium removal have been discussed meticulously.

Induced-Fit-Identification in a Rigid Metal-Organic Framework for ppm-Level CO2 Removal and Ultra-Pure CO Enrichment

Removing CO2 from crude syngas via physical adsorption is an effective method to yield eligible syngas. However, the bottleneck in trapping ppm-level CO2 and improving CO purity at higher working temperatures are major challenges. Here we report a thermoresponsive metal-organic framework (1 a-apz), assembled by rigid Mg2 (dobdc) (1 a) and aminopyrazine (apz), which not only affords an ultra-high CO2 capacity (145.0/197.6 cm3  g-1 (0.01/0.1 bar) at 298 K) but also produces ultra-pure CO (purity ≥99.99 %) at a practical ambient temperature (TA ). Several characterization results, including variable-temperature tests, in situ high-resolution synchrotron X-ray diffraction (HR-SXRD), and simulations, explicitly unravel that the excellent property is attributed to the induced-fit-identification in 1 a-apz that comprises self-adaption of apz, multiple binding sites, and complementary electrostatic potential (ESP). Breakthrough tests suggest that 1 a-apz can remove CO2 from 1/99 CO2 /CO mixtures at practical 348 K, yielding 70.5 L kg-1 of CO with ultra-high purity of ≥99.99 %. The excellent separation performance is also revealed by separating crude syngas that contains quinary mixtures of H2 /N2 /CH4 /CO/CO2 (46/18.3/2.4/32.3/1, v/v/v/v/v).

Crossover Sorption of C2 H2 /CO2 and C2 H6 /C2 H4 in Soft Porous Coordination Networks

Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of "crossover sorption," in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn2 (L1)(L2)2 ]n (PCP-1) and [Zn2 (L1)(L3)2 ]n (PCP-2) (L1= 1,4-bis(4-pyridyl)benzene, L2=5-methyl-1,3-di(4-carboxyphenyl)benzene, and L3=5-methoxy-1,3-di(4-carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C2 H2 /CO2 and C2 H6 /C2 H4 , in which the apparent affinity reverse with temperature. We used in situ gas-loading single-crystal X-ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP-1 for C2 H2 , CO2 , C2 H6 , and C2 H4 gases at various temperatures. Interestingly, we observed three-step single-crystal to single-crystal (sc-sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host-guest or guest-guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host-guest and guest-guest interactions.

Pore Modulation of Hydrogen-Bonded Organic Frameworks for Efficient Separation of Propylene

Developing hydrogen-bonded organic frameworks (HOFs) that combine functional sites, size control, and storage capability for targeting gas molecule capture is a novel and challenging venture. However, there is a lack of effective strategies to tune the hydrogen-bonded network to achieve high-performance HOFs. Here, a series of HOFs termed as HOF-ZSTU-M (M=1, 2, and 3) with different pore structures are obtained by introducing structure-directing agents (SDAs) into the hydrogen-bonding network of tetrakis (4-carboxyphenyl) porphyrin (TCPP). These HOFs have distinct space configurations with pore channels ranging from discrete to continuous multi-dimensional. Single-crystal X-ray diffraction (SCXRD) analysis reveals a rare diversity of hydrogen-bonding models dominated by SDAs. HOF-ZSTU-2, which forms a strong layered hydrogen-bonding network with ammonium (NH4 + ) through multiple carboxyl groups, has a suitable 1D "pearl-chain" channel for the selective capture of propylene (C3 H6 ). At 298 K and 1 bar, the C3 H6 storage density of HOF-ZSTU-2 reaches 0.6 kg L-1 , representing one of the best C3 H6 storage materials, while offering a propylene/propane (C3 H6 /C3 H8 ) selectivity of 12.2. Theoretical calculations and in situ SCXRD provide a detailed analysis of the binding strength of C3 H6 at different locations in the pearl-chain channel. Dynamic breakthrough tests confirm that HOF-ZSTU-2 can effectively separate C3 H6 from multi-mixtures.

Multivariate Metal-Organic Frameworks Prepared by Simultaneous Metal/Ligand Exchange for Enhanced C2-C3 Selective Recovery from Natural Gas

Recovering light alkanes from natural gas is a critical but challenging process in petrochemical production. Herein, we propose a postmodification strategy via simultaneous metal/ligand exchange to prepare multivariate metal-organic frameworks with enhanced capacity and selectivity of ethane (C2H6) and propane (C3H8) for their recovery from natural gas with methane (CH4) as the primary component. By utilizing the Kuratowski-type secondary building unit of CFA-1 as a scaffold, namely, {Zn5(OAc)4}6+, the Zn2+ metal ions and OAc- ligands were simultaneously exchanged by other transition metal ions and halogen ligands under mild conditions. Inspiringly, this postmodification treatment can give rise to improved capacity for C2H6 and C3H8 without a noticeable increase in CH4 uptake, and consequently, it resulted in significantly enhanced selectivity toward C2H6/CH4 and C3H8/CH4. In particular, by adjusting the species and amount of the modulator, the optimal sample CFA-1-NiCl2-2.3 demonstrated the maximum capacities of C2H6 (5.00 mmol/g) and C3H8 (8.59 mmol/g), increased by 29 and 32% compared to that of CFA-1. Moreover, this compound exhibited excellent separation performance toward C2H6/CH4 and C3H8/CH4, with high uptake ratios of 6.9 and 11.9 at 298 K and 1 bar, respectively, superior to the performance of a majority of the reported MOFs. Molecular simulations were applied to unravel the improved separation mechanism of CFA-1-NiCl2-2.3 toward C2H6/CH4 and C3H8/CH4. Furthermore, remarkable thermal/chemical robustness, moderate isosteric heat, and fully reproducible breakthrough experiments were confirmed on CFA-1-NiCl2-2.3, indicating its great potential for light alkane recovery from natural gas.

Design of a MOF-based nano-trap for the efficient separation of propane from propylene

A parallel Cu paddle wheel structure was developed to form an efficient C₃H₆ nano-trap. Benefiting from having this trap, ATC-Cu showed a very high capacity for binding C₃H₆ and high C₃H₆/C₃H₈ selectivity at 298 K.

Highly Tunable MOF Luminophores Featuring Anthracene Directed Assembly and Fluorescence Regulation

Metal-organic frameworks (MOFs) have been recognized as a potential platform for the development of tunable luminophores owing to their highly modulable structures and components. Herein, two MOF luminophores based on Cd(II) ions, 1,3,5-tri(4-pyridinyl)benzene (TPB), and 1,4-dicarboxybenzene (H₂BDC) were constructed. The directed assembly of the metal ions and organic linkers results in [Cd₂(BDC)₂(TPB)(H₂O)]·x(solvent) (MOF-1) featuring TPB-based blue fluorescence centered at 425 nm. By introducing anthracene as the structure directing agent (SDA) for assembly regulation, [Cd₂(BDC)(TPB)₂(NO₃)₂]·x(solvent) (MOF-2) was obtained, which reveals anthracene feeding-dependent high tunable emission in the 517-650 nm range. Detailed components, photophysical properties, and structural characteristics investigations of MOF-2 indicate the TPB and NO₃^- interactions as the origin of its redshifted emission compared with that of MOF-1. Furthermore, the fluorescence of MOF-2 was found to be regulatable by the anthracene feeding based on the SDA-determined crystallinity of the crystalline sample. All these results provided a unique example of the structural and fluorescence regulation of MOF luminophores.

Optimizing Acetylene Sorption through Induced-fit Transformations in a Chemically Stable Microporous Framework

Developing practical storage technologies for acetylene (C₂ H₂ ) is important but challenging because C₂ H₂ is useful but explosive. Here, a novel metal-organic framework (MOF) (FJI-H36) with adaptive channels was prepared. It can effectively capture C₂ H₂ (159.9 cm³  cm^-3 ) at 1 atm and 298 K, possessing a record-high storage density (561 g L^-1 ) but a very low adsorption enthalpy (28 kJ mol^-1 ) among all the reported MOFs. Structural analyses show that such excellent adsorption performance comes from the synergism of active sites, flexible framework, and matched pores; where the adsorbed-C₂ H₂ can drive FJI-H36 to undergo induced-fit transformations step by step, including deformation/reconstruction of channels, contraction of pores, and transformation of active sites, finally leading to dense packing of C₂ H₂ . Moreover, FJI-H36 has excellent chemical stability and recyclability, and can be prepared on a large scale, enabling it as a practical adsorbent for C₂ H₂ . This will provide a useful strategy for developing practical and efficient adsorbents for C₂ H₂ storage.

Optimal Binding Affinity for Sieving Separation of Propylene from Propane in an Oxyfluoride Anion-Based Metal-Organic Framework

Highly efficient adsorptive separation of propylene from propane offers an ideal alternative method to replace the energy-intensive cryogenic distillation technology. Molecular sieving-type separation via high-performance adsorbents is targeted for superior selectivity, but the limit in adsorption capacity remains a great challenge. Here, we report an oxyfluoride-based ultramicroporous metal-organic framework UTSA-400, [Ni(WO₂F₄)(pyz)₂] (pyz = pyrazine), featuring one-dimensional pore channels that can accommodate the propylene molecules with optimal binding affinity while specifically excluding the propane molecules. The exposed oxide/fluoride pairs in UTSA-400 serve as strong functional sites for strengthened propylene-host interactions, accounting for a significantly enhanced propylene uptake, while the propane molecules are excluded due to the regulated host framework dynamics. The strong propylene binding enables near-saturation of propylene in the pore confinement at ambient conditions, leading to full utilization of pore space and superior packing density. Combined in situ infrared spectroscopy measurements and dispersion-corrected density functional theory calculations clearly unveil the nature of boosted host-guest binding. Direct production of polymer-grade (>99.5%) propylene with remarkable dynamic productivity is demonstrated by column breakthrough experiments. This work presents an example of pore engineering with atomic precision to break the trade-off in adsorptive separation through guest binding optimization.

Metal-Organic Framework with Structural Flexibility Responding Specifically to Acetylene and Its Adsorption Behavior

Flexible metal-organic frameworks (MOFs) are one kind of stimuli-responsive materials that exhibit reversible structural transformations in response to external stimuli. Exploring and understanding the stimuli response behavior of flexible MOFs is challenging, as it involves weak host-guest interaction. We report here the unique flexibility of MOF Zn(int)(Ad) (TIF-A1, Hint = isonicotinic acid, Had = adenine) induced by acetylene adsorption. TIF-A1 is rigid toward most gas molecules, while only C₂H₂ can induce the flexibility of TIF-A1. C₂H₂-loaded TIF-A1 is characterized by single-crystal X-ray diffraction and molecular modeling. It is revealed that the flexibility of TIF-A1 originates from the strong interaction between acetylene and the framework, which pushes the rotation of the int ligand and the expansion of the framework simultaneously. This work is helpful in deeply understanding the flexibility of MOFs and guides exploring new flexible MOFs in the future.

Ultramicroporous material based parallel and extended paraffin nano-trap for benchmark olefin purification

Selective paraffin capture from olefin/paraffin mixtures could afford high-purity olefins directly, but suffers from the issues of low separation selectivity and olefin productivity. Herein, we report an ultramicroporous material (PCP-IPA) with parallel-aligned linearly extending isophthalic acid units along the one-dimensional channel, realizing the efficient production of ultra-high purity C₂H₄ and C₃H₆ (99.99%). The periodically expanded and parallel-aligned aromatic-based units served as a paraffin nano-trap to contact with the exposed hydrogen atoms of both C₂H₆ and C₃H₈, as demonstrated by the simulation studies. PCP-IPA exhibits record separation selectivity of 2.48 and separation potential of 1.20 mol/L for C₃H₈/C₃H₆ (50/50) mixture, meanwhile the excellent C₂H₆/C₂H₄ mixture separation performance. Ultra-high purity C₃H₆ (99.99%) and C₂H₄ (99.99%) can be directly obtained through fixed-bed column from C₃H₈/C₃H₆ and C₂H₆/C₂H₄ mixtures, respectively. The record C₃H₆ productivity is up to 15.23 L/kg from the equimolar of C₃H₈/C₃H₆, which is 3.85 times of the previous benchmark material, demonstrating its great potential for those important industrial separations.

Development of Cationic Benzimidazole-Containing UiO-66 through Step-by-Step Linker Modification to Enhance the Initial Sorption Rate and Sorption Capacities for Heavy Metal Oxo-Anions

Effective and rapid capture of heavy metal oxo-anions from wastewater is a fascinating research topic, but it remains a great challenge. Herein, benzimidazole and -CH₃ groups were integrated into UiO-66 in succession via a step-by-step linker modification strategy that was performed by presynthesis modification (to give Bim-UiO-66) and subsequently by postsynthetic ionization (to give Bim-UiO-66-Me). The UiO-66s (UiO-66, Bim-UiO-66, and Bim-UiO-66-Me) were applied in the removal of heavy metal oxo-anions from water. The two benzimidazole derivatives (Bim-UiO-66 and Bim-UiO-66-Me) showed much better performance than UiO-66, as both the initial sorption rate and sorption capacities decreased in the order Bim-UiO-66-Me > Bim-UiO-66 > UiO-66. The maximum performances of Bim-UiO-66 are 5.1 and 1.7 times those of UiO-66. Remarkably, Bim-UiO-66-Me shows 7.5 and 3.0 times better performance than UiO-66. The higher absorptivity of cationic Bim-UiO-66-Me compared with UiO-66 can be attributed to a strong Coulombic interaction as well as an anion-π interaction and hydrogen bonding between the benzimidazolium functional group and heavy metal oxo-anions. The as-synthesized Bim-UiO-66-Me not only provides a promising candidate for application in removal of heavy metal oxo-anions in wastewater treatment but also opens up a new strategy for the design of high-performance adsorbents.

Two-Dimensional Metal-Organic Framework with Ultrahigh Water Stability for Separation of Acetylene from Carbon Dioxide and Ethylene

Highly selective separation and purification of acetylene (C2H2) from ethylene (C2H4) and carbon dioxide (CO2) are daunting challenges in light of their similar molecule sizes and physical properties. Herein, we report a two-dimensional (2D) stable metal-organic framework (MOF), NUM-11 ([Cu(Hmpba)2]·1.5DMF) (H2mpba = 4-(3,5-dimethyl-1H-pyrazol-4-yl)benzoic acid), with sql topology, stacked together through π-π interactions for efficient separation of C2H2 from C2H4 and CO2. The 2D-MOF material offers high hydrolytic stability and good purification capacity; especially, it could survive in water for 7 months, even longer. This stable MOF selectively captures C2H2 from mixtures containing C2H4 and CO2, as determined by adsorption isotherms. The ideal adsorbed solution theory selectivity calculations and transient breakthrough experiments were performed to verify the separation capacity. The low isosteric heat of NUM-11a (desolvated NUM-11) (18.24 kJ mol-1 for C2H2) validates the feasibility of adsorbent regeneration with low energy footprint consumption. Furthermore, Grand Canonical Monte Carlo simulations confirmed that the pore surface of the NUM-11 framework enabled preferential binding of C2H2 over C2H4 and CO2 via multiple C-H···O, C-H···π, and C-H···C interactions. This work provides some insights to prepare stable MOF materials toward the purification of C2H2, and the water-stable structure, low isosteric heat, and good cycling stability of NUM-11 make it very promising for practical industrial application.

Surfactant-induced adsorption of Pb(II) on the cracked structure of microplastics

Surfactant molecules can change the hydrophobic nature of microplastic surfaces, thereby affecting the adsorption of heavy metals in the environment onto the microplastics. It is essential to explore the role of crack structure of microplastics in the adsorption of heavy metals, especially in the presence of surfactants. In this study, polyethylene (PE) and polypropylene (PP) were evaluated for Pb(II) adsorption and desorption mechanism in the presence of two surfactants: cetyltrimethylammonium bromide (CTAB) and sodium dodecylbenzenesulfonate (SDBS). The experimental results were analyzed using kinetics and the isothermal model fitting and spectrogram (FTIR, XPS). This study showed that the application of surfactants could greatly enhance the Pb(II) adsorption capacities of PE and PP by promoting Pb(II) into the fissures. The Pb(II), S, and N contents did not significantly decrease at different depths in the presence of surfactants, and the Pb(II) content without surfactants decreased with an increasing depth. The adsorption behavior was consistent with the Bangham channel diffusion model and the DR model, suggesting that the adsorption process was related to the pore structure of the microplastics. Furthermore, the release of Pb(II) from desorption using high concentration of surfactant solution was less than that of low concentration, it was difficult to release heavy metals primarily because of the crack structure of the microplastics, especially when more surfactant molecules entered the pores. This work contributes to a better understanding of the adsorption mechanism of heavy metals on microplastics in the presence of surfactants, which will better control the ecological risks of microplastics.

Flexible metal-organic frameworks for gas storage and separation

Flexible metal-organic frameworks (MOFs) have gradually attracted much attention due to their reversible structural changes and flexible structural responses. The basic research of flexible MOFs is to study their dynamic responses under different external stimuli and translate the responses into applications. Most research studies on flexible MOFs focus on gas storage and separation, but lack a systematic summary. Here, we review the development of flexible MOFs, the structural transformation under the external effects of temperature, pressure, and guest molecules, and their applications in gas storage and separation. Microporous MOFs with flexible structures provide unique opportunities for fine-tuning their performance because the pore shape and size can be controlled by external stimuli. The characteristics of breathing phenomena and large specific surface area make flexible MOFs suitable candidates for gas storage and separation. Finally, the application prospects of flexible MOFs are reported.

Influence of Metal Identity on Light-Induced Switchable Adsorption in Azobenzene-Based Metal-Organic Frameworks

Energy-efficient capture and release of small gas molecules, particularly carbon dioxide (CO₂) and methane (CH₄), are of significant interest in academia and industry. Porous materials such as metal-organic frameworks (MOFs) have been extensively studied, as their ultrahigh porosities and tunability enable significant amounts of gas to be adsorbed while also allowing specific applications to be targeted. However, because of the microporous nature of MOFs, the gas adsorption performance is dominated by high uptake capacity at low pressures, limiting their application. Hence, methods involving stimuli-responsive materials, particularly light-induced switchable adsorption (LISA), offer a unique alternative to thermal methods. Here, we report the mechanism of a well-known LISA system, the azobenzene-based material PCN-250, for CO₂ and CH₄ adsorption. There is a noticeable difference in the LISA effect dependent on the metal cluster involved, with the most significant being PCN-250-Al, where the adsorption can change by 83.1% CH₄ and 56.1% CO₂ at 298 K and 1 bar and inducing volumetric storage changes of 36.2 and 33.9 cm³/cm³ at 298 K between 5 and 85 bar (CH₄) and 2 and 9 bar (CO₂), respectively. Using UV light in both single-crystal X-ray diffraction and gas adsorption testing, we show that upon photoirradiation, the framework undergoes a "localized heating" phenomenon comparable to an increase of 130 K for PCN-250-Fe and improves the working capacity. This process functions because of the constrained nature of the ligand, preventing the typical trans-to-cis isomerization observed in free azobenzene. In addition, we observed that the degree of localized heating is highly dependent on the metal cluster involved, with the series of isostructural PCN-250 systems showing variable performance based upon the degree of interaction between the ligand and the metal center.

Hexahydric Components Metal Organic Frameworks Constructed by Multiple Ligands and Mixed-Valence Ions

In this work, we report two multi-component MOFs [CH3NH2CH3]2[FeIII2MII10(tz)11(HCO2)12(btc)5/3] (MII10 = FeII10 for 1 and MII10 = FeII2CoII8 for 2) obtained by solvothermal assembling formate, benzene-1,3,5-tricarboxylate (btc) and 1,2,4 triazole...

Pore-Space Partition through an Embedding Metal-Carboxylate Chain-Induced Topology Upgrade Strategy for the Separation of Acetylene/Ethylene

Ethylene (C₂H₄) is one of the most significant substances in the petrochemical industry; however, the capture of acetylene (C₂H₂) in about 1% from C₂H₂/C₂H₄ mixtures is a difficult task because of the similarity of their physical properties. With the aggravation of the energy crisis, using metal-organic framework (MOF) materials to purify C₂H₄ through adsorptive separation is a promising way to save energy and reduce emission. Pore-space partition (PSP) with the aim of enhancing the density of the binding sites and the strength of the host-guest interactions is an effective means to promote a solution for the challenging gas separation problems. Herein, we report a new embedding metal-carboxylate chain-induced topology upgrade strategy within a MOF to realize PSP and separation of C₂H₂/C₂H₄ mixtures. As a proof of concept, we construct a microporous MOF (NUM-12) utilizing the in situ insertion of cobalt terephthalic chains into a pretargeted ant-type framework during synthesis. Because of the attainment of an elaborately tuned aperture size and a specific pore environment through this strategy, NUM-12a (activated NUM-12) not only has a remarkable gas sorption capacity and strong interactions for C₂H₂ but also possesses an excellent purification performance for C₂H₂/C₂H₄ mixtures. Both experiments and simulation calculations clearly reveal that NUM-12 is a promising candidate for the separation of C₂H₂/C₂H₄, proving the feasibility of this new strategy for developing newly fashioned MOFs with adjustable structure and performance.

The role of thermodynamically stable configuration in enhancing crystallographic diffraction quality of flexible MOFs

Single-crystal X-ray diffraction (SCXRD) is a widely used method for structural characterization. Generally, low temperature is of great significance for improving the crystallographic diffraction quality. Herein we observe that this practice is not always effective for flexible metal-organic frameworks (f-MOFs). An abnormal crystallography, that is, more diffraction spots at a high angle and better resolution of diffraction data as the temperature increases in the f-MOF (1-g), is observed. XRD results reveal that 1-g has a reversible anisotropic thermal expansion behavior with a record-high c-axial positive expansion coefficient of 1,401.8 × 10-6 K-1. Calculation results indicate that the framework of 1-g has a more stable thermodynamic configuration as the temperature increases. Such configuration has lower-frequency vibration and may play a key role in promoting higher Bragg diffraction quality at room temperature. This work is of great significance for how to obtain high-quality SCXRD diffraction data.