Challenges in distinguishing superexchange and hopping mechanisms of intramolecular charge transfer through fluorene oligomers

Weakly Conjugated Phosphine Oxide Hosts for Efficient Blue Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes

The development of host materials with high first-triplet state (T₁) energy and high charge mobility is a key to achieve efficient true-blue organic light-emitting diodes (OLEDs), employing phosphorescence and thermally activated delayed fluorescence (TADF). An ether-bridged double triphenylphosphine oxide (TPPO) compound, bis(2-(diphenylphosphino)phenyl)ether oxide (DPEPO), was reported to have a very high T₁ energy of 3.3 eV but suffers from poor charge mobility. Here, five bridge-controlled multi-TPPO derivatives were studied through a combination of experiments and theory. We demonstrate that the push-pull electron capability of the bridge group governs the T₁ energy and electron mobility of these materials. Replacing the ether bridge by a bis(trifluoromethyl)methylene group can reduce the energy barrier for intramolecular electron exchange and consequently enhance the electron mobility by two orders of magnitude without lowering the T₁ energy. A blue TADF OLED employing this bis(trifluoromethyl)methylene-bridged compound achieves the same high external quantum efficiency but a much higher current density compared to the control device employing DPEPO. In contrast, a bridge group with strong electron-withdrawing capability, such as phosphine oxygen or sulfone, lowers the T₁ energy of the compound by enhancing the electronic coupling between TPPO subunits and inhibits intermolecular electron transfer by trapping the electron charge around the bridge.

Superexchange in the fast lane - intramolecular electron transfer in a molecular triad occurs by conformationally gated superexchange

Photoinduced electron transfer via hopping is generally considered to have a stronger temperature dependence than electron transfer via superexchange. However, in this work, an opposite trend of the temperature dependence is observed. This unexpected result is rationalized by considering the specific geometrical and electronic structure of the Ru-bis(terpyridine) photosensitizer.

Remote control of electronic coupling – modification of excited-state electron-transfer rates in Ru(tpy)2-based donor–acceptor systems by remote ligand design

Electronic coupling (H_DA) underlying the electron transfer (ET) can be tuned by the remote substituents R.

Charge transport in molecular junctions: From tunneling to hopping with the probe technique

We demonstrate that a simple phenomenological approach can be used to simulate electronic conduction in molecular wires under thermal effects induced by the surrounding environment. This "Landauer-Büttiker's probe technique" can properly replicate different transport mechanisms, phase coherent nonresonant tunneling, ballistic behavior, and hopping conduction. Specifically, our simulations with the probe method recover the following central characteristics of charge transfer in molecular wires: (i) the electrical conductance of short wires falls off exponentially with molecular length, a manifestation of the tunneling (superexchange) mechanism. Hopping dynamics overtakes superexchange in long wires demonstrating an ohmic-like behavior. (ii) In off-resonance situations, weak dephasing effects facilitate charge transfer, but under large dephasing, the electrical conductance is suppressed. (iii) At high enough temperatures, kBT/ϵB > 1/25, with ϵB as the molecular-barrier height, the current is enhanced by a thermal activation (Arrhenius) factor. However, this enhancement takes place for both coherent and incoherent electrons and it does not readily indicate on the underlying mechanism. (iv) At finite-bias, dephasing effects may impede conduction in resonant situations. We further show that memory (non-Markovian) effects can be implemented within the Landauer-Büttiker's probe technique to model the interaction of electrons with a structured environment. Finally, we examine experimental results of electron transfer in conjugated molecular wires and show that our computational approach can reasonably reproduce reported values to provide mechanistic information.

DNA as a molecular wire: distance and sequence dependence

Functional nanowires and nanoelectronics are sought for their use in next generation integrated circuits, but several challenges limit the use of most nanoscale devices on large scales. DNA has great potential for use as a molecular wire due to high yield synthesis, near-unity purification, and nanoscale self-organization. Nonetheless, a thorough understanding of ground state DNA charge transport (CT) in electronic configurations under biologically relevant conditions, where the fully base-paired, double-helical structure is preserved, is lacking. Here, we explore the fundamentals of CT through double-stranded DNA monolayers on gold by assessing 17 base pair bridges at discrete points with a redox active probe conjugated to a modified thymine. This assessment is performed under temperature-controlled and biologically relevant conditions with cyclic and square wave voltammetry, and redox peaks are analyzed to assess transfer rate and yield. We demonstrate that the yield of transport is strongly tied to the stability of the duplex, linearly correlating with the melting temperature. Transfer rate is found to be temperature-activated and to follow an inverse distance dependence, consistent with a hopping mechanism of transport. These results establish the governing factors of charge transfer speed and throughput in DNA molecular wires for device configurations, guiding subsequent application for nanoscale electronics.

Exponential distance dependence of photoinitiated stepwise electron transfer in donor-bridge-acceptor molecules: implications for wirelike behavior

Donor-bridge-acceptor (D-B-A) systems in which a 3,5-dimethyl-4-(9-anthracenyl)julolidine (DMJ-An) chromophore and a naphthalene-1,8:4,5-bis(dicarboximide) (NI) acceptor are linked by oligomeric 2,7-fluorenone (FN(n)) bridges (n = 1-3) have been synthesized. Selective photoexcitation of DMJ-An quantitatively produces DMJ(+•)-An(-•), and An(-•) acts as a high-potential electron donor. Femtosecond transient absorption spectroscopy in the visible and mid-IR regions showed that electron transfer occurs quantitatively in the sequence: DMJ(+•)-An(-•)-FN(n)-NI → DMJ(+•)-An-FN(n)(-•)-NI → DMJ(+•)-An-FN(n)-NI(-•). The charge-shift reaction from An(-•) to NI(-•) exhibits an exponential distance dependence in the nonpolar solvent toluene with an attenuation factor (β) of 0.34 Å(-1), which would normally be attributed to electron tunneling by the superexchange mechanism. However, the FN(n)(-•) radical anion was directly observed spectroscopically as an intermediate in the charge-separation mechanism, thereby demonstrating conclusively that the overall charge separation involves the incoherent hopping (stepwise) mechanism. Kinetic modeling of the data showed that the observed exponential distance dependence is largely due to electron injection onto the first FN unit followed by charge hopping between the FN units of the bridge biased by the distance-dependent electrostatic attraction of the two charges in D(+•)-B(-•)-A. This work shows that wirelike behavior does not necessarily result from building a stepwise, energetically downhill redox gradient into a D-B-A molecule.

Temperature dependence of charge separation and recombination in porphyrin oligomer-fullerene donor-acceptor systems

Electron-transfer reactions are fundamental to many practical devices, but because of their complexity, it is often very difficult to interpret measurements done on the complete device. Therefore, studies of model systems are crucial. Here the rates of charge separation and recombination in donor-acceptor systems consisting of a series of butadiyne-linked porphyrin oligomers (n = 1-4, 6) appended to C(60) were investigated. At room temperature, excitation of the porphyrin oligomer led to fast (5-25 ps) electron transfer to C(60) followed by slower (200-650 ps) recombination. The temperature dependence of the charge-separation reaction revealed a complex process for the longer oligomers, in which a combination of (i) direct charge separation and (ii) migration of excitation energy along the oligomer followed by charge separation explained the observed fluorescence decay kinetics. The energy migration is controlled by the temperature-dependent conformational dynamics of the longer oligomers and thereby limits the quantum yield for charge separation. Charge recombination was also studied as a function of temperature through measurements of femtosecond transient absorption. The temperature dependence of the electron-transfer reactions could be successfully modeled using the Marcus equation through optimization of the electronic coupling (V) and the reorganization energy (λ). For the charge-separation rate, all of the donor-acceptor systems could be successfully described by a common electronic coupling, supporting a model in which energy migration is followed by charge separation. In this respect, the C(60)-appended porphyrin oligomers are suitable model systems for practical charge-separation devices such as bulk-heterojunction solar cells, where conformational disorder strongly influences the electron-transfer reactions and performance of the device.

Single-step charge transport through DNA over long distances

Quantum yields for charge transport across adenine tracts of increasing length have been measured by monitoring hole transport in synthetic oligonucleotides between photoexcited 2-aminopurine, a fluorescent analogue of adenine, and N(2)-cyclopropyl guanine. Using fluorescence quenching, a measure of hole injection, and hole trapping by the cyclopropyl guanine derivative, we separate the individual contributions of single- and multistep channels to DNA charge transport and find that with 7 or 8 intervening adenines the charge transport is a coherent, single-step process. Moreover, a transition occurs from multistep to single-step charge transport with increasing donor/acceptor separation, opposite to that generally observed in molecular wires. These results establish that coherent transport through DNA occurs preferentially across 10 base pairs, favored by delocalization over a full turn of the helix.

Unified expression for the rate constant of the bridged electron transfer derived by renormalization

Electron transfer (ET) from a donor to an acceptor through an energetically close intermediary state on a midway molecule is a process found often in natural and artificial solar-energy capturing systems such as photosynthesis. This process has often been thought of in terms of opposing "superexchange" and "sequential or hopping" mechanisms, and the recent theory of Sumi and Kakitani (SK) [J. Phys. Chem. B 105, 9603 (2001)] has shown an interpolation between these mechanisms. In their theory, however, dynamics governing the most interesting intermediary region between them has artificially been introduced by phenomenologies. The dynamics is played by decoherence among electronic states, their decay, and thermalization of phonons in the medium. The present work clarifies the dynamics on a microscopic basis by means of renormalization in electronic coupling among the states, and gives a complete unified expression of the rate constant of the ET. It merges to that given by the SK theory in the semiclassical approximation for phonons interacting with an electron transferred.