A nanocellulose polypyrrole composite based on microfibrillated cellulose from wood

Characteristics of new pyrrolic derivatives and their oligomers using DFT and TD-DFT calculations

CONTEXT

This article is based on the study of pyrrolic derivatives and their oligomers. Knowing that, pyrrolic derivatives are widely studied on an industrial scale. The aim of this work is to find pyrrolic derivatives having the same physicochemical characteristics such as the pyrrolic edifice. Six derivatives were studied by substituting the hydrogens in the β position of the pyrroles with the following radicals: -CHO, -Cl, -CN, -NO, and -OH. The study was carried out theoretically using ab initio and density functional of theory (DFT) methods. In the first step, molecules of four units were taken into consideration in order to make the comparison between them. This comparison showed that the majority of molecules exhibited high intramolecular charge transfer (ICT) compared to the molecule composed of four pyrrolic units (OP4), and also exhibited strong nucleophilic and electrophilic characteristics. Natural bond orbital (NBO) analysis has shown continuous ICT mechanisms for certain molecules. The studied derivatives showed good solvation in several solvents compared to OP4. The molecules substituted by the radicals -CHO, -CN, -OH, and -NO generated several peaks in the excited states, which is the opposite case for the other molecules with a single peak. The effects of chain elongation revealed exponential equations generated by the two parameters energy gaps (ΔEH-L) and maximum wavelengths (λmax) as a function of the number of units (n). These equations were used to predict the maximum and minimum values of the above parameters for more elongated oligomers.

METHOD

The software used to make the calculations is Gaussian 16. All geometries were calculated by B3LYP functional and 6-31++G(d,p) basis set. The electronic parameters ΔEH-L were calculated by the following functionals: B3LYP, CAM-B3LYP, LC-wPBE, LC-BLYP, wB97X, M062X, M06HF, and M11 in addition to the second-order Møller-Plesset method (MP2) while always keeping the basis set mentioned before. An effect of basis set variation was studied by the optimal functional in combination with the following basis sets: 6-31G(d,p), 6-31++G(d,p), cc-pVDZ, AUG-cc-pVDZ, 6-311G(d,p), 6-311++G(d,p), cc-pVTZ, and AUG-cc-pVTZ. The NBO study was carried out with the M06HF/6-31++G(d,p) functional using the NBO method. The solvation parameters were calculated by M06HF/6-31++G(d,p) in the presence of the implicit solvation model Solvation Model based on Density (SMD). The excited states were calculated by M06HF/6-31++G(d,p) by the implicit solvation model Conductor Polarizable Continuum Model (CPCM).

Aqueous Processable One-Dimensional Polypyrrole Nanostructured by Lignocellulose Nanofibril: A Conductive Interfacing Biomaterial

One-dimensional (1D) nanomaterials of conductive polypyrrole (PPy) are competitive biomaterials for constructing bioelectronics to interface with biological systems. Synergistic synthesis using lignocellulose nanofibrils (LCNF) as a structural template in chemical oxidation of pyrrole with Fe(III) ions facilitates surface-confined polymerization of pyrrole on the nanofibril surface within a submicrometer- and micrometer-scale fibril length. It yields a core-shell nanocomposite of PPy@LCNF, wherein the surface of each individual fibril is coated with a thin nanoscale layer of PPy. A highly positive surface charge originating from protonated PPy gives this 1D nanomaterial a durable aqueous dispersity. The fibril-fibril entanglement in the PPy@LCNFs facilely supported versatile downstream processing, e.g., spray thin-coating on glass, flexible membranes with robust mechanics, or three-dimensional cryogels. A high electrical conductivity in the magnitude of several to 12 S·cm-1 was confirmed for the solid-form PPy@LCNFs. The PPy@LCNFs are electroactive and show potential cycling capacity, encompassing a large capacitance. Dynamic control of the doping/undoping process by applying an electric field combines electronic and ionic conductivity through the PPy@LCNFs. The low cytotoxicity of the material is confirmed in noncontact cell culture of human dermal fibroblasts. This study underpins the promises for this nanocomposite PPy@LCNF as a smart platform nanomaterial in constructing interfacing bioelectronics.

Mechanically Enhanced Nanocrystalline Cellulose/Reduced Graphene Oxide/Polyethylene Glycol Electrically Conductive Composite Film

Traditional conductive materials do not meet the increasing requirements of electronic products because of such materials' high rigidity, poor flexibility, and slow biodegradation after disposal. Preparing flexible conductive materials with excellent mechanical properties is an active area of research. The key to flexible conductive materials lies in the combination of the polymer matrix and conductive components. This combination can be achieved by making a film of renewable nano-microcrystalline cellulose (NCC) and reduced graphene oxide (rGO) with excellent electrical conductivity-by simple filtration and introducing polyethylene glycol (PEG) to enhance the functionality of the composite film. Graphene imparted conductivity to the composite film, which reached 5.67 S·m^-1. A reinforced NCC/rGO/PEG-4 composite film with a thickness of only 21 μm exhibited a tensile strength of 30.56 MPa, which was 83% higher than that of the sample without PEG (16.71 MPa), and toughness of 727.18 kJ·m^-3, which was about 132% higher than that of the control sample (NCC/rGO, 313.86 kJ·m^-3). This ultra-thin conductive composite film-which can be prepared simply, consists of environmentally sustainable and biodegradable raw materials, and exhibits excellent mechanical properties-has substantial potential for applications in e.g., flexible electronic wearable devices, electrodes, and capacitors.

Microfibrillated cellulose as growth media for cultivation and maintenance of wood decay fungi

Newly enforced trade restrictions on seaweed, have resulted in short supply of technical agar with potential consequences for research, public health, and clinical labs. Here we show that microfibrillated cellulose (MFC), with and without an additional carbon source, can be used as an inexpensive growth media for cultivating and maintaining wood decay fungi.

Bio-based films/nanopapers from lignocellulosic wastes for production of added-value micro-/nanomaterials

The growing demand for products with lower environmental impact and the extensive applicability of cellulose nanofibrils (CNFs) have received attention due to their attractive properties. In this study, bio-based films/nanopapers were produced with CNFs from banana tree pseudostem (BTPT) wastes and Eucalyptus kraft cellulose (EKC) and were evaluated by their properties, such as mechanical strength, biodegradability, and light transmittance. The CNFs were produced by mechanical fibrillation (after 20 and 40 passages) from suspensions of BTPT (alkaline pre-treated) and EKC. Films/nanopapers were produced by casting from both suspensions with concentrations of 2% (based in dry mass of CNF). The BTPT films/nanopapers showed greater mechanical properties, with Young's modulus and tensile strength around 2.42 GPa and 51 MPa (after 40 passages), respectively. On the other hand, the EKC samples showed lower disintegration in water after 24 h and biodegradability. The increase in the number of fibrillation cycles produced more transparent films/nanopapers and caused a significant reduction of water absorption for both raw materials. The permeability was similar for the films/nanopapers from BTPT and EKC. This study indicated that attractive mechanical properties and biodegradability, besides low cost, could be achieved by bio-based nanomaterials, with potential for being applied as emulsifying agents and special membranes, enabling more efficient utilization of agricultural wastes.

Functionalized Nanocellulose Drives Neural Stem Cells toward Neuronal Differentiation

Transplantation of differentiated and fully functional neurons may be a better therapeutic option for the cure of neurodegenerative disorders and brain injuries than direct grafting of neural stem cells (NSCs) that are potentially tumorigenic. However, the differentiation of NSCs into a large population of neurons has been a challenge. Nanomaterials have been widely used as substrates to manipulate cell behavior due to their nano-size, excellent physicochemical properties, ease of synthesis, and versatility in surface functionalization. Nanomaterial-based scaffolds and synthetic polymers have been fabricated with topology resembling the micro-environment of the extracellular matrix. Nanocellulose materials are gaining attention because of their availability, biocompatibility, biodegradability and bioactivity, and affordable cost. We evaluated the role of nanocellulose with different linkage and surface features in promoting neuronal differentiation. Nanocellulose coupled with lysine molecules (CNC-Lys) provided positive charges that helped the cells to attach. Embryonic rat NSCs were differentiated on the CNC-Lys surface for up to three weeks. By the end of the three weeks of in vitro culture, 87% of the cells had attached to the CNC-Lys surface and more than half of the NSCs had differentiated into functional neurons, expressing endogenous glutamate, generating electrical activity and action potentials recorded by the multi-electrode array.

Recent Progress in Development of Wearable Pressure Sensors Derived from Biological Materials

This review summarizes recent progress in the use of biological materials (biomaterials) in wearable pressure sensors. Biomaterials are abundant, sustainable, biocompatible, and biodegradable. Especially, many have sophisticated hierarchical structure and biological characteristics, which are attractive candidates for facile and ecologically-benign fabrication of wearable pressure sensors that are biocompatible, biodegradable, and highly sensitivity. The biomaterials and structures that use them in wearable pressure sensors that exploit sensing mechanisms such as piezoelectric, triboelectric, piezoresistive and capacitive effects are present. Finally, remaining impediments are discussed to use of biomaterials in wearable pressure sensors.

Microalgae as Contributors to Produce Biopolymers

Biopolymers are very favorable materials produced by living organisms, with interesting properties such as biodegradability, renewability, and biocompatibility. Biopolymers have been recently considered to compete with fossil-based polymeric materials, which rase several environmental concerns. Biobased plastics are receiving growing interest for many applications including electronics, medical devices, food packaging, and energy. Biopolymers can be produced from biological sources such as plants, animals, agricultural wastes, and microbes. Studies suggest that microalgae and cyanobacteria are two of the promising sources of polyhydroxyalkanoates (PHAs), cellulose, carbohydrates (particularly starch), and proteins, as the major components of microalgae (and of certain cyanobacteria) for producing bioplastics. This review aims to summarize the potential of microalgal PHAs, polysaccharides, and proteins for bioplastic production. The findings of this review give insight into current knowledge and future direction in microalgal-based bioplastic production considering a circular economy approach. The current review is divided into three main topics, namely (i) the analysis of the main types and properties of bioplastic monomers, blends, and composites; (ii) the cultivation process to optimize the microalgae growth and accumulation of important biobased compounds to produce bioplastics; and (iii) a critical analysis of the future perspectives on the field.

Simultaneous surface functionalization and drug loading: A novel method for fabrication of cellulose nanocrystals-based pH responsive drug delivery system

Herein, a novel strategy for surface functionalization and drug loading of cellulose nanocrystals (CNCs) through formation of hydrazone bonds between functionalized CNCs and aldehyde group containing polyethylene glycol (CHO-PEG)/anticancer drug doxorubicin (DOX) was reported for the first time. DOX could be loaded on PEGylated CNCs with high capacity and released from drug complexes (P-CNCs-D) with pH dependent behavior. The biological evaluation results demonstrated that drug carriers (CNCs-EBO-NH) showed negative cytotoxicity while DOX could be transported into cells and exhibits desirable anticancer effects. As compared with other method, the method developed in this work is rather simple and effective and can be achieved for simultaneous for surface functionalization and drug loading in a one-pot route. This work will open a new avenue for fabrication of various multifunctional composites based on other carbohydrate polymers or materials and to explore their applications in biomedical fields.

Structural and Ecofriendly Holocellulose Materials from Wood: Microscale Fibers and Nanoscale Fibrils

Mildly delignified wood holocellulose fibers show well-preserved cellulose nanofibril (CNF) structure in the fiber cell wall. Fibers, paper, biocomposites, and compression-molded fiber materials demonstrate excellent mechanical properties. Here, wood holocellulose fibers and corresponding CNFs are discussed with respect to nanostructure, mechanical performance, and advanced materials potential. Functionalization routes are discussed, as well as materials selection, nanoscience of recycling, and the embodied energy in cellulosic candidates for multifunctional structural materials.

A facile and eco-friendly approach for preparation of microkeratin and nanokeratin by ultrasound-assisted enzymatic hydrolysis

Protein is one of the most abundant natural polymeric materials, but only a few studies on nanoproteins have been conducted. In this paper, a novel approach based on ultrasound-assisted enzymatic hydrolysis was employed for the preparation of microkeratin and nanokeratin from wool. The hydrolysis system included a solution containing enzyme (esperase) and reductant (L-cysteine) and treated ultrasonically to remove the scales and amorphous regions within wool. Results showed that the reaction was most effective at 50 °C and pH 7, when incubated for 3 h, followed by sonication for 6 h. The products included spindle-shaped microkeratin (4-7 μm in diameter and 70-120 μm in length) and cone-shaped nanokeratin (50-300 nm in diameter and less than 15 μm in length). Under ultrasonic-assisted conditions, the yields of microkeratin and nanokeratin increased significantly, while the treatment time decreased. Fourier transform infrared spectroscopy (FTIR) showed that the chemical structures of microkeratin and nanokeratin did not change, compared to that of wool. X-ray diffraction (XRD) analysis showed that the microkeratin was mainly composed of α-helical structure, while the β-sheet structure was more prevalent in nanokeratin. The presented method is facile and eco-friendly, thereby paving new pathways for the preparation of microkeratin and nanokeratin.

A. M. N, Halim AS, Kumar USU, Bairwan R, Suriani AB. A Review on Micro- to Nanocellulose Biopolymer Scaffold Forming for Tissue Engineering Applications

Biopolymers have been used as a replacement material for synthetic polymers in scaffold forming due to its biocompatibility and nontoxic properties. Production of scaffold for tissue repair is a major part of tissue engineering. Tissue engineering techniques for scaffold forming with cellulose-based material is at the forefront of present-day research. Micro- and nanocellulose-based materials are at the forefront of scientific development in the areas of biomedical engineering. Cellulose in scaffold forming has attracted a lot of attention because of its availability and toxicity properties. The discovery of nanocellulose has further improved the usability of cellulose as a reinforcement in biopolymers intended for scaffold fabrication. Its unique physical, chemical, mechanical, and biological properties offer some important advantages over synthetic polymer materials. This review presents a critical overview of micro- and nanoscale cellulose-based materials used for scaffold preparation. It also analyses the relationship between the method of fabrication and properties of the fabricated scaffold. The review concludes with future potential research on cellulose micro- and nano-based scaffolds. The review provides an up-to-date summary of the status and future prospective applications of micro- and nanocellulose-based scaffolds for tissue engineering.

Nature-derived materials for the fabrication of functional biodevices

Nature provides an incredible source of inspiration, structural concepts, and materials toward applications to improve the lives of people around the world, while preserving ecosystems, and addressing environmental sustainability. In particular, materials derived from animal and plant sources can provide low-cost, renewable building blocks for such applications. Nature-derived materials are of interest for their properties of biodegradability, bioconformability, biorecognition, self-repair, and stimuli response. While long used in tissue engineering and regenerative medicine, their use in functional devices such as (bio)electronics, sensors, and optical systems for healthcare and biomonitoring is finding increasing attention. The objective of this review is to cover the varied nature derived and sourced materials currently used in active biodevices and components that possess electrical or electronic behavior. We discuss materials ranging from proteins and polypeptides such as silk and collagen, polysaccharides including chitin and cellulose, to seaweed derived biomaterials, and DNA. These materials may be used as passive substrates or support architectures and often, as the functional elements either by themselves or as biocomposites. We further discuss natural pigments such as melanin and indigo that serve as active elements in devices. Increasingly, combinations of different biomaterials are being used to address the challenges of fabrication and performance in human monitoring or medicine. Finally, this review gives perspectives on the sourcing, processing, degradation, and biocompatibility of these materials. This rapidly growing multidisciplinary area of research will be advanced by a systematic understanding of nature-inspired materials and design concepts in (bio)electronic devices.

Acid-free preparation and characterization of kelp (Laminaria japonica) nanocelluloses and their application in Pickering emulsions

Cellulose nanofibers (CNFs) from kelp were prepared by cellulase treatment with lengths greater than 3 μm. CNFs were further oxidized by TEMPO-oxidized system, and the lengths of the oxidized CNFs (TEMPO-CNFs) were 0.6-1 μm. AFM and TEM images showed that intertwined CNFs fibers were divided into individual nanofibrils. The crystallinity of TEMPO-CNFs increased to 66.5 %. TGA analysis indicated that TEMPO-CNFs were more sensitive to temperature than cellulose and CNFs. FT-IR spectra revealed no changes in the basic cellulose structures of CNFs and TEMPO-CNFs. In the sunflower oil/water (20/80, v/v) model emulsions, the oil droplet sizes were less than 20 μm in CNFs emulsions, which became smaller in TEMPO-CNFs emulsions. Delamination was found in CNFs emulsions after three days of storage. Addition of NaCl increased the volumes of TEMPO-CNFs emulsions but enlarged the oil droplets sizes. TEMPO-CNFs emulsions had the largest volume with smallest and most homogeneous oil droplets at pH 3. TEMPO-CNFs emulsions showed good stability after storage for 30 days. Further, TEMPO-CNFs could also emulsify 50 % (v/v) of sunflower oil. All these results indicated that TEMPO-CNFs can be used in preparing Pickering emulsions.

Preparation of Foam-like Network Structure of Polypyrrole/Graphene Composite Particles Based on Cellulose Nanofibrils as Electrode Material

Unusual polypyrrole/graphene/cellulose nanofibril (PPy/GR/CNF) composite particles were fabricated by introducing an in situ oxidative polymerization approach. Structural characterization of the composite particles showed foam-like network morphology with a large surface area of 621 m²/g. The PPy/GR/CNF sample exhibited remarkable capacitance behavior in 1 M Na₂SO₄. It showed a high specific capacitance of 264.3 F/g at 0.25 A/g, which represents a 51.7% increase compared to that of PPy/GR and a high capacitance of 155.5 F/g even at a high current density of 5 A/g. Meanwhile, it possessed high rate capability and good cycling performance (85.7% capacitance retention even after 1000 cycles). These excellent electrochemical performances were attributed to the structure of PPy/GR/CNF that can provide large surface areas and shorten electron diffusion pathways. More importantly, the CNF stabilized the structure of PPy and prevented chain breakdown during the charge/discharge process, which improved the cycling performance. Hence, this PPy/GR/CNF composite shows great potential for the fabrication of high-capacitance and low-cost supercapacitor electrode materials with good cycling performance.

Toward Low-Cost All-Organic and Biodegradable Li-Ion Batteries

This work presents an alternative method for fabricating Li-ion electrodes in which the use of aluminum/copper current collectors and expensive binders is avoided. Low-cost natural cellulose fibers with a 2-mm length are employed as binder and support for the electrode. The objective of this method is to eliminate the use of heavy and inactive current collector foils as substrates and to replace conventional costly binders with cellulose fibers. Moreover, no harmful solvents, such as N-methylpyrrolidone, are employed for film fabrication. Water-soluble carbons are also utilized to reduce the preparation time and to achieve a better repartition of carbon in the electrode, thus improving the electrochemical performance. Flexible and resistant LiFePO₄ (LFP), Li₄Ti₅O₁₂ (LTO), organic 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA), and graphite electrodes are obtained with active mass loadings similar to those obtained by the current casting method. The initial discharge capacity of approximately 130 mAh·g⁻¹ at 2 C is obtained for an LFP/LTO paper battery with an approximately 91.6% capacity retention after 1000 cycles. An all-organic prelithiated PTCDA/graphite cell without a transition metal is prepared and electrochemically tested. It is one of the first self-standing batteries that is composed of organic redox active molecules and biodegradable components reported in literature.

Nanocellulose applications in sustainable electrochemical and piezoelectric systems: A review

Recent studies advocate the use of cellulose nanomaterials (CNs) as a sustainable carbohydrate polymer in numerous innovative electronics for their quintessential features such as flexibility, low thermal expansion and self-/directed assembly within multiphase matrices. Herein, we review the contemporary advances in CN-built electrochemical systems and highlight the constructive effects of these nanoscopic entities once engineered in conductive composites, proton exchange membranes (PEMs), electrochromics, energy storage devices and piezoelectric sensors. The adopted strategies and designs are discussed in view of CN roles as copolymer, electrolyte reservoir, binder and separator. Finally, physiochemical attributes and durability of resulting architectures are compared to conventional materials and the possible challenges/solutions are delineated to realize the promising capabilities. The volume of the up-to-present literature in the field indeed implies to nanocellulose overriding importance and the presented angles perhaps shed more lights on prospect of the biosphere's most dominant biomaterial in the energy-related arena that deserve attention.

Design and Optimization of Flexible Polypyrrole/Bacterial Cellulose Conductive Nanocomposites Using Response Surface Methodology

Flexible conductive materials have greatly promoted the rapid development of intelligent and wearable textiles. This article reports the design of flexible polypyrrole/bacterial cellulose (PPy/BC) conductive nanocomposites by in situ chemical polymerization. Box-Behnken response surface methodology has been applied to optimize the process. The effects of the pyrrole amount, the molar ratio of HCl to pyrrole and polymerization time on conductivity were investigated. A flexible PPy/BC nanocomposite was obtained with an outstanding electrical conductivity as high as 7.34 S cm⁻¹. Morphological, thermal stability and electrochemical properties of the nanocomposite were also studied. The flexible PPy/BC composite with a core-sheath structure exhibited higher thermal stability than pure cellulose, possessed a high areal capacitance of 1001.26 mF cm⁻² at the discharge current density of 1 mA cm⁻², but its cycling stability could be further improved. The findings of this research demonstrate that the response surface methodology is one of the most effective approaches for optimizing the conditions of synthesis. It also indicates that the PPy/BC composite is a promising material for applications in intelligent and wearable textiles.

Concerted Catalysis by Nanocellulose and Proline in Organocatalytic Michael Additions

Cellulose nanofibers (CNFs) have recently attracted much attention as catalysts in various reactions. Organocatalysts have emerged as sustainable alternatives to metal-based catalysts in green organic synthesis, with concerted systems containing CNFs that are expected to provide next-generation catalysis. Herein, for the first time, we report that a representative organocatalyst comprising an unexpected combination of 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-oxidized CNFs and proline shows significantly enhanced catalytic activity in an asymmetric Michael addition.

Versatile Application of Nanocellulose: From Industry to Skin Tissue Engineering and Wound Healing

Nanocellulose is cellulose in the form of nanostructures, i.e., features not exceeding 100 nm at least in one dimension. These nanostructures include nanofibrils, found in bacterial cellulose; nanofibers, present particularly in electrospun matrices; and nanowhiskers, nanocrystals, nanorods, and nanoballs. These structures can be further assembled into bigger two-dimensional (2D) and three-dimensional (3D) nano-, micro-, and macro-structures, such as nanoplatelets, membranes, films, microparticles, and porous macroscopic matrices. There are four main sources of nanocellulose: bacteria (Gluconacetobacter), plants (trees, shrubs, herbs), algae (Cladophora), and animals (Tunicata). Nanocellulose has emerged for a wide range of industrial, technology, and biomedical applications, namely for adsorption, ultrafiltration, packaging, conservation of historical artifacts, thermal insulation and fire retardation, energy extraction and storage, acoustics, sensorics, controlled drug delivery, and particularly for tissue engineering. Nanocellulose is promising for use in scaffolds for engineering of blood vessels, neural tissue, bone, cartilage, liver, adipose tissue, urethra and dura mater, for repairing connective tissue and congenital heart defects, and for constructing contact lenses and protective barriers. This review is focused on applications of nanocellulose in skin tissue engineering and wound healing as a scaffold for cell growth, for delivering cells into wounds, and as a material for advanced wound dressings coupled with drug delivery, transparency and sensorics. Potential cytotoxicity and immunogenicity of nanocellulose are also discussed.

Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications

With increasing environmental and ecological concerns due to the use of petroleum-based chemicals and products, the synthesis of fine chemicals and functional materials from natural resources is of great public value. Nanocellulose may prove to be one of the most promising green materials of modern times due to its intrinsic properties, renewability, and abundance. In this review, we present nanocellulose-based materials from sourcing, synthesis, and surface modification of nanocellulose, to materials formation and applications. Nanocellulose can be sourced from biomass, plants, or bacteria, relying on fairly simple, scalable, and efficient isolation techniques. Mechanical, chemical, and enzymatic treatments, or a combination of these, can be used to extract nanocellulose from natural sources. The properties of nanocellulose are dependent on the source, the isolation technique, and potential subsequent surface transformations. Nanocellulose surface modification techniques are typically used to introduce either charged or hydrophobic moieties, and include amidation, esterification, etherification, silylation, polymerization, urethanization, sulfonation, and phosphorylation. Nanocellulose has excellent strength, high Young's modulus, biocompatibility, and tunable self-assembly, thixotropic, and photonic properties, which are essential for the applications of this material. Nanocellulose participates in the fabrication of a large range of nanomaterials and nanocomposites, including those based on polymers, metals, metal oxides, and carbon. In particular, nanocellulose complements organic-based materials, where it imparts its mechanical properties to the composite. Nanocellulose is a promising material whenever material strength, flexibility, and/or specific nanostructuration are required. Applications include functional paper, optoelectronics, and antibacterial coatings, packaging, mechanically reinforced polymer composites, tissue scaffolds, drug delivery, biosensors, energy storage, catalysis, environmental remediation, and electrochemically controlled separation. Phosphorylated nanocellulose is a particularly interesting material, spanning a surprising set of applications in various dimensions including bone scaffolds, adsorbents, and flame retardants and as a support for the heterogenization of homogeneous catalysts.

Cellulose Nanomaterials-Binding Properties and Applications: A Review

Cellulose nanomaterials (CNs) are of increasing interest due to their appealing inherent properties such as bio-degradability, high surface area, light weight, chirality and the ability to form effective hydrogen bonds across the cellulose chains or within other polymeric matrices. Extending CN self-assembly into multiphase polymer structures has led to useful end-results in a wide spectrum of products and countless innovative applications, for example, as reinforcing agent, emulsion stabilizer, barrier membrane and binder. In the current contribution, after a brief description of salient nanocellulose chemical structure features, its types and production methods, we move to recent advances in CN utilization as an ecofriendly binder in several disparate areas, namely formaldehyde-free hybrid composites and wood-based panels, papermaking/coating processes, and energy storage devices, as well as their potential applications in biomedical fields as a cost-effective and tissue-friendly binder for cartilage regeneration, wound healing and dental repair. The prospects of a wide range of hybrid materials that may be produced via nanocellulose is introduced in light of the unique behavior of cellulose once in nano dimensions. Furthermore, we implement some principles of colloidal and interfacial science to discuss the critical role of cellulose binding in the aforesaid fields. Even though the CN facets covered in this study by no means encompass the great amount of literature available, they may be regarded as the basis for future developments in the binder applications of these highly desirable materials.

A Surfactant Directed Microcrystalline Cellulose/Polyaniline Composite with Enhanced Electrochemical Properties

In this study a cationic surfactant, cetyltrimethylammonium bromide (CTAB), was used as a soft template for in situ chemical polymerization of aniline on the surface of microcrystalline cellulose (MCC). The morphology of the wire-like and porous nanostructure of the resulting composite was highly dependent on the MCC and CTAB concentrations. The effect of the MCC and CTAB concentrations on the electrochemical and morphological properties of the polyaniline (PAni) nanocomposite was studied. Cyclic voltammograms of modified PAni/MCC/CTAB electrode displayed a high current response and the effect of scan rate on the current response confirmed a diffusion controlled process on the surface of the electrode that makes it suitable for sensor applications. The overlapping characteristic peaks of pure PAni and MCC caused peak broadening at 3263 cm^-1 in the IR spectra of PAni/MCC/CTAB nanocomposite that revealed the interaction between NH of PAni and OH group of MCC via electrostatic interactions. The addition of MCC to PAni through chemical polymerization decreased the thermal stability of composite compared to pure PAni. Lower crystallinity was observed in the XRD diffractogram, with 2 theta values of 22.8, 16.5, and 34.6 for PAni/MCC, confirming the formation of PAni on the MCC surface.

Transparent and Water-Resistant Composites Prepared from Acrylic Resins ABPE-10 and Acetylated Nanofibrillated Cellulose as Flexible Organic Light-Emitting Device Substrate

Acetylated nanofibrillated cellulose (ANFC)/acrylic resin ABPE-10 composite film was prepared by impregnating ABPE-10 into ANFC films under negative pressure, which can enhance properties of ANFC films by forming an interpenetrating polymer network structure between ABPE-10 and the ANFC film. The ANFC/ABPE-10 composite film met the high performance flexible organic light-emitting diode substrate requirement, even when the ANFC dosage was as high as approximately 70%. The transparency of films with different ANFC dosages significantly increased from 67% (42 µm) to 88% (45 µm), as determined by ultraviolet-visible analysis. The composite film inherited the properties of AFNC, with a low coefficient of thermal expansion and a ductile compact structure. The contact angles of ANFC films increased from 49.2° to 102.9° after dipping in ABPE-10. Additionally, the composite films had good surface smoothness and mechanical properties.

Isolation and Rheological Characterization of Cellulose Nanofibrils (CNFs) from Coir Fibers in Comparison to Wood and Cotton

In this report, the isolation and rheological characterization of cellulose nanofibrils from coir (CNFs-1) were studied and compared with the CNFs from wood (CNFs-2) and cotton (CNFs-3). Cellulose nanofibrils were isolated successfully from coir fibers by chemical treatments followed by ultrasonic fibrillation. During ultrasonic processing, the size and the crystal structure of the CNFs were influenced by the raw materials. In comparison to CNFs-2 and CNFs-3, CNFs-1 from coir fibers presented diverse advantages, such as sufficient fibrillation with a low diameter distribution, in the range of 2⁻4 nm and high crystallinity. In the dynamic rheology study of CNFs-1, elastic behavior was observed and maintained due to the formation of gel-like steady network structures, which could not be easily deconstructured by frequency shearing and temperature changing. All results indicated that coir fibers could be used as a valuable resource for the preparation of CNFs, which exhibited comparable properties with those isolated from wood, in regard to morphology and rheological properties. This work provides a basis for further advanced applications using the CNFs isolated from coir fibers.

Development of high throughput, high precision synthesis platforms and characterization methodologies for toxicological studies of nanocellulose

Cellulose is one of the most abundant natural polymers, is readily available, biodegradable, and inexpensive. Recently, interest is growing around nanoscale cellulose due to the sustainability of these materials, the novel properties, and the overall low environmental impact. The rapid expansion of nanocellulose uses in various applications makes the study of the toxicological properties of these materials of great importance to public health regulators. However, most of the current toxicological studies are highly conflicting, inconclusive, and contradictory. The major reasons for these discrepancies are the lack of standardized methods to produce industry-relevant reference nanocellulose and relevant characterization that will expand beyond the traditional cellulose characterization for applications. In order to address these issues, industry-relevant synthesis platforms were developed to produce nanocellulose of controlled properties that can be used as reference materials in toxicological studies. Herein, two types of nanocellulose were synthesized, cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) using the friction grinding platform and an acid hydrolysis approach respectively. The nanocellulose structures were characterized extensively regarding their physicochemical properties, including testing for endotoxins and bacteria contamination.

Development of high throughput, high precision synthesis platforms and characterization methodologies for toxicological studies of nanocellulose

Cellulose is one of the most abundant natural polymers, is readily available, biodegradable, and inexpensive. Recently, interest is growing around nanoscale cellulose due to the sustainability of these materials, the novel properties, and the overall low environmental impact. The rapid expansion of nanocellulose uses in various applications makes the study of the toxicological properties of these materials of great importance to public health regulators. However, most of the current toxicological studies are highly conflicting, inconclusive, and contradictory. The major reasons for these discrepancies are the lack of standardized methods to produce industry-relevant reference nanocellulose and relevant characterization that will expand beyond the traditional cellulose characterization for applications. In order to address these issues, industry-relevant synthesis platforms were developed to produce nanocellulose of controlled properties that can be used as reference materials in toxicological studies. Herein, two types of nanocellulose were synthesized, cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) using the friction grinding platform and an acid hydrolysis approach respectively. The nanocellulose structures were characterized extensively regarding their physicochemical properties, including testing for endotoxins and bacteria contamination.

Polypyrrole/tannin biobased nanocomposite with enhanced electrochemical and physical properties

In this research, tannin (TA) extracted from Acacia mangium and a cationic surfactant, cetyltrimethylammonium bromide (CTAB), were used to modify and enhance the physical and electrochemical properties of a polypyrrole (PPy) composite. Brunauer–Emmett–Teller (BET) analysis presented a higher degree of surface area and porosity for the PPy/TA/CTAB nanocomposite. A highly porous and rod like structure with a lumpy surface was observed for PPy/TA prepared in the presence of CTAB by Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM). Cyclic voltammograms of the modified SPE electrode using PPy/TA/CTAB displayed an enhanced current response compared to the electrode modified with only PPy or PPy/TA. Electrochemical Impedance Spectroscopy (EIS) exhibited a lower value of charge transfer resistance (R_ct) and higher electron transfer for the modified electrode, making the nanocomposite a promising candidate for biosensor application.

Tannin (TA) extracted from Acacia mangium and a cationic surfactant, cetyltrimethylammonium bromide (CTAB), were used to modify and enhance the physical and electrochemical properties of polypyrrole (PPy) composite.

Acetylation improves thermal stability and transmittance in FOLED substrates based on nanocellulose films

Bleached softwood pulp was used to prepare nanofibrillated cellulose (NFC) by mechanical grinding and a high-pressure homogenization process. Acetylation improved the aspect ratio and dispersion of the NFC; however, highly acetylated NFC was not able to form a film by vacuum filtration if the NFC : acetic anhydride (AA) ratio was greater than 1 : 6. An NFC film prepared by acetylated NFC has potential as a flexible organic light-emitting device (FOLED) substrate. Acetylation improved the thermal stability and transmittance of NFC films, which were optimal at 5.43 ppm K⁻¹ and 65%, respectively, when the ratio of NFC : AA was 1 : 3. Moreover, both the mechanical properties and flexibility of the NFC films were well maintained when the NFC : AA ratio was 1 : 3. Additionally, all NFC films prepared by acetylated NFC were smooth, flat, and uniform.

Bleached softwood pulp was used to prepare nanofibrillated cellulose (NFC) by mechanical grinding and a high-pressure homogenization process.

Nanocellulose as a sustainable biomass material: structure, properties, present status and future prospects in biomedical applications

Nanocellulose, extracted from the most abundant biomass material cellulose, has proved to be an environmentally friendly material with excellent mechanical performance owing to its unique nano-scaled structure, and has been used in a variety of applications as engineering and functional materials. The great biocompatibility and biodegradability, in particular, render nanocellulose promising in biomedical applications. In this review, the structure, treatment technology and properties of three different nanocellulose categories, i.e., nanofibrillated cellulose (NFC), nanocrystalline cellulose (NCC) and bacterial nanocellulose (BNC), are introduced and compared. The cytotoxicity, biocompatibility and frontier applications in biomedicine of the three nanocellulose categories were the focus and are detailed in each section. Future prospects concerning the cytotoxicity, applications and industrial production of nanocellulose are also discussed in the last section.

A review on cellulose and lignin based binders and electrodes: Small steps towards a sustainable lithium ion battery

Lithium ion batteries (LIB) are the most promising energy storage systems for portable electronics and future electric or hybrid-electric vehicles. However making them safer, cost effective and environment friendly is the key challenge. In this regard, replacing petro-derived materials by introducing renewable biomass derived cellulose derivatives and lignin based materials into the battery system is a promising approach for the development of green materials for LIB. These biomaterials introduce sustainability as well as improved safety in the final disposal of LIB batteries. In this review we introduce LIB materials technology in brief and recent developments in electrodes and binders based on cellulose and their derivatives and lignin for lithium ion batteries.

Polyaniline-Stabilized Intertwined Network-like Ferrocene/Graphene Nanoarchitecture for Supercapacitor Application

The present work highlights the effective H-π interaction between metallocenes (ferrocene; Fc) and graphene and their stabilization in the presence of polyaniline (PANI) through π-π interactions. The PANI-stabilized Fc@graphene nanocomposite (FcGA) resembled an intertwined network-like morphology with high surface area and porosity, which could make it a potential candidate for energy-storage applications. The relative interactions between the components were assessed through theoretical (DFT) calculations. The specific capacitance calculated from galvanostatic charging/discharging indicated that the PANI-stabilized ternary nanocomposite exhibited a maximum specific capacitance of 960 F g^- at an energy density of 85 Wh Kg^-1 and a current density of 1 A g^- . Furthermore, electrochemical impedance spectroscopy (EIS) analysis confirmed the low internal resistance of the as-prepared nanocomposites, which showed improved charge-transfer properties of graphene after incorporation of Fc and stabilization with PANI. Additionally, all electrodes were found to be stable up to 5000 cycles with a specific capacitance retention of 86 %, thus demonstrating the good reversibility and durability of the electrode material.