Small-Angle X-ray Scattering Investigations of Biomolecular Confinement, Loading, and Release from Liquid-Crystalline Nanochannel Assemblies

Revolutionizing transdermal drug delivery: unveiling the potential of cubosomes and ethosomes

The area of drug delivery systems has witnessed significant advancements in recent years, with a particular focus on improving efficacy, stability, and patient compliance. Transdermal drug delivery offers numerous benefits compared to conventional methods of drug administration through the skin. It helps in avoiding gastric irritation, hepatic first-pass metabolism, and gastric degradation of the drug. It bypasses the gastrointestinal tract, eliminating the risk of first-pass metabolism and allowing drugs to be administered without being affected by pH, enzymes, or intestinal bacteria. Additionally, it allows for sustained release of the drug, is noninvasive, and enhances patient adherence to the treatment regimen. The transdermal drug delivery system (TDDS) can serve as an alternative route for drug administration in individuals who cannot tolerate oral medications, experience nausea, or are unconscious. When compared to intravenous, hypodermic, and other parenteral routes, TDDS stands out due to its ability to eliminate pain, reduce the risk of infection, and prevent disease transmission associated with needle reuse. Consequently, the overall patient compliance is significantly improved with the utilization of TDDS. Among the noteworthy developments are cubosomes and ethosomes, two distinct yet promising carriers that have garnered attention for their unique properties. In conclusion, this review synthesizes the current knowledge on cubosomes and ethosomes, shedding light on their individual strengths and potential synergies. The exploration of their application in various therapeutic areas underscores their versatility and establishes them as key players in the evolving landscape of drug delivery systems.

Lipid-based liquid crystalline materials in electrochemical sensing and nanocarrier technology

Some biologically active substances are unstable and poorly soluble in aqueous media, at the same time exhibiting low bioavailability. The incorporation of these biologically active compounds into the structure of a lipid-based lyotropic liquid crystalline phase or nanoparticles can increase or improve their stability and transport properties, subsequent bioavailability, and applicability in general. The aim of this short overview is (1) to clarify the principle of self-assembly of lipidic amphiphilic molecules in an aqueous environment and (2) to present lipidic bicontinuous cubic and hexagonal phases and their current biosensing (with a focus on electrochemical protocols) and biomedical applications.

Spatially and time-resolved SAXS for monitoring dynamic structural transitions during in situ generation of non-lamellar liquid crystalline phases in biologically relevant media

Formation of high viscous inverse lyotropic liquid crystalline phases in situ upon exposure of low viscous drug-loaded lipid preformulations to synovial fluid provides a promising approach for design of depot formulations for intra-articular drug delivery. Rational formulation design relies on a fundamental understanding of the synovial fluid-mediated dynamic structural transitions occurring at the administration site. At conditions mimicking the in vivo situation, we investigated in real-time such transitions at multiple positions by synchrotron small-angle X-ray scattering (SAXS) combined with an injection-cell. An injectable diclofenac-loaded quaternary preformulation consisting of 72/8/10/10% (w/w) glycerol monooleate/1,2-dioleoyl-glycero-3-phospho-rac-(1-glycerol)/ethanol/water was injected into hyaluronic acid solution or synovial fluid. A fast generation of a coherent drug depot of inverse bicontinuous Im3m and Pn3m cubic phases was observed. Through construction of 2D spatial maps from measurements performed 60 min after injection of the preformulation, it was possible to differentiate liquid crystalline rich- and excess hyaluronic acid solution- or synovial fluid-rich regimes. Synchrotron SAXS findings confirmed that the exposure of the preformulation to the media leads to alterations in structural features in position- and time-dependent manners. Effects of biologically relevant medium composition on the structural features, and implications for development of formulations with sustained drug release properties are highlighted.

Advances in microfluidic synthesis and coupling with synchrotron SAXS for continuous production and real-time structural characterization of nano-self-assemblies

Microfluidic platforms have become highly attractive tools for synthesis of nanoparticles, including lipid nano-self-assemblies, owing to unique features and at least three important aspects inherent to miniaturized micro-devices. Firstly, the fluids flow under controlled conditions in the microchannels, providing well-defined flow profiles and shorter diffusion lengths that play important roles in enhancing the continuous production of lipid and polymer nanoparticles with relatively narrow size distributions. Secondly, various geometries adapted to microfluidic device designs can be utilized for enhancing the colloidal stability of nanoparticles and improving their drug loading. Thirdly, microfluidic devices are usually compatible with in situ characterization methods for real-time monitoring of processes occurring inside the microchannels. This is unlike conventional nanoparticle synthesis methods, where a final solution or withdrawn aliquots are separately analysed. These features inherent to microfluidic devices provide a tool-set allowing not only precise nanoparticle size control, but also real-time analyses for process optimization. In this review, we focus on recent advances and developments in the use of microfluidic devices for synthesis of lipid nanoparticles. We present different designs based on hydrodynamic flow focusing, droplet-based methods and controlled microvortices, and discuss integration of microfluidic platforms with synchrotron small-angle X ray scattering (SAXS) for in situ structural characterization of lipid nano-self-assemblies under continuous flow conditions, along with major challenges and future directions in this research area.

Membrane Protein Structures in Lipid Bilayers; Small-Angle Neutron Scattering With Contrast-Matched Bicontinuous Cubic Phases

This perspective describes advances in determining membrane protein structures in lipid bilayers using small-angle neutron scattering (SANS). Differentially labeled detergents with a homogeneous scattering length density facilitate contrast matching of detergent micelles; this has previously been used successfully to obtain the structures of membrane proteins. However, detergent micelles do not mimic the lipid bilayer environment of the cell membrane in vivo. Deuterated vesicles can be used to obtain the radius of gyration of membrane proteins, but protein-protein interference effects within the vesicles severely limits this method such that the protein structure cannot be modeled. We show herein that different membrane protein conformations can be distinguished within the lipid bilayer of the bicontinuous cubic phase using contrast-matching. Time-resolved studies performed using SANS illustrate the complex phase behavior in lyotropic liquid crystalline systems and emphasize the importance of this development. We believe that studying membrane protein structures and phase behavior in contrast-matched lipid bilayers will advance both biological and pharmaceutical applications of membrane-associated proteins, biosensors and food science.

Fast understanding of phases and phase separation in liquid crystal drug delivery systems using deuterium solid-state NMR

Characterization of lipid based (SPC/GDO/H₂O) liquid crystal (LC) drug delivery system is non-trivial and highly complex, especially when multiple and intermediate phases are present. The phase behavior of such mixtures during hydration or delivery is still poorly understood and therefore, characterizing these systems is crucially important towards controlling their function and enhancing the understanding of their drug release behavior. Current work has established an easy way to identify liquid crystal phases and phase mixtures using deuterium (²H) solid-state nuclear magnetic (NMR) spectroscopy under static conditions without disrupting the three dimensional structure and phases, as magic-angle spinning (MAS) could lead to disruption of the phases. Small angle X-ray scattering (SAXS) technique and optical microscopy were also employed to corroborate the study.

Monocytic Cell-Induced Phase Transformation of Circulating Lipid-Based Liquid Crystalline Nanosystems

Both lamellar and non-lamellar configurations are naturally present in bio-membranes, and the synthetic lipid-based liquid crystalline nano-assemblies, mimicking these unique structures, (including liposomes, cubosomes and hexosomes) are applicable in the controlled delivery of bioactives. However, it remains uncertain whether these nanosystems retain their original phase identity upon contact with blood circulating cells. This study highlights a novel biological cell flow-through approach at the synchrotron-based small angle X-ray scattering facility (bio-SAXS) to unravel their real-time phase evolution when incubated with human monocytic cells (THP-1) in suspension. Phytantriol-based cubosomes were identified to undergo monocytic cell-induced phase transformation from cubic to hexagonal phase periodicity. On the contrary, hexosomes exhibited time-dependent growth of a swollen hexagonal phase (i.e., larger lattice parameters) without displaying alternative phase characteristics. Similarly, liposomes remained undetectable for any newly evolved phase identity. Consequently, this novel in situ bio-SAXS study concept is valuable in delivering new important insights into the bio-fates of various lipid-based nanosystems under simulated human systemic conditions.

Cubosomes: The Next Generation of Smart Lipid Nanoparticles?

Cubosomes are highly stable nanoparticles formed from the lipid cubic phase and stabilized by a polymer based outer corona. Bicontinuous lipid cubic phases consist of a single lipid bilayer that forms a continuous periodic membrane lattice structure with pores formed by two interwoven water channels. Cubosome composition can be tuned to engineer pore sizes or include bioactive lipids, the polymer outer corona can be used for targeting and they are highly stable under physiological conditions. Compared to liposomes, the structure provides a significantly higher membrane surface area for loading of membrane proteins and small drug molecules. Owing to recent advances, they can be engineered in vitro in both bulk and nanoparticle formats with applications including drug delivery, membrane bioreactors, artificial cells, and biosensors. This review outlines recent advances in cubosome technology enabling their application and provides guidelines for the rational design of new systems for biomedical applications.

Exploring the water/oil/water interface of phospholipid stabilized double emulsions by micro-focusing synchrotron SAXS

Surfactant stabilized water/oil/water (w/o/w) double emulsions have received much attention in the last years motivated by their wide applications.

Structural characterization of self-assemblies of new omega-3 lipids: docosahexaenoic acid and docosapentaenoic acid monoglycerides

The attractiveness of new omega-3 (ω-3) polyunsaturated fatty acid (PUFA) monoglycerides (MAGs) lies in the amphiphilic nature and the beneficial health effects as PUFA precursors in various disorders including cancer, pulmonary hypertension, and inflammatory diseases. For exploring the potential therapeutic applications of these new amphiphilic lipids, particularly as main lipid constituents in the development of nanocarriers for delivery of drugs and PUFAs, it is of paramount importance to gain insight into their self-assembly behavior on exposure to excess water. This work describes the structural characteristics of self-assemblies based on two newly synthesized MAGs, namely docosahexaenoic acid (MAG-DHA) and docosapentaenoic acid (MAG-DPA) monoglycerides, on exposure to excess water. We found that both lipids tend to form a dominant inverse hexagonal (H₂) phase in excess water at 25 °C and a temperature-triggered structural transition to an inverse micellar solution (L₂ phase) is detected similar to that recently reported (A. Yaghmur et al., Langmuir, 2017, 33, 14045-14057) for eicosapentaenoic acid monoglyceride (MAG-EPA). An experimental SAXS structural evaluation study on the temperature-dependent behavior of these new monoglycerides is provided, and the effects of unsaturation degree and fatty acyl chain length on the self-assembled structural features in excess water and on the H₂-L₂ phase transition temperature are discussed. In addition, hexosomes stabilized by using the triblock copolymer F127 and the food-grade emulsifier citrem were investigated to gain insights into the effects of stabilizer and temperature on the internal nanostructure. These nanoparticles are attractive for use in the development of nanocarriers for delivering drugs and/or nutritional compounds as the beneficial health effects of ω-3 PUFA monoglycerides can be combined with those of loaded therapeutic agents or nutraceuticals.

Reverse Hexosome Dispersions in Alkanes-The Challenge of Inverting Structures

Monoglycerides form lipophilic liquid-crystalline (LC) phases when mixed with water. The corresponding LC nanostructures coexist with excess water, which is a necessary condition for the formation of internally nanostructured dispersed particles. These nanostructures comprise bicontinuous cubic phases, inverted hexagonal phases, and inverted micellar cubic phases. The dispersed particles are therefore named cubosomes, hexosomes, or micellar cubosomes. Such dispersions are usually stabilized by hydrophilic high-molecular-weight triblock (TB) copolymers. Another way to stabilize such dispersions is by forming the so-called Pickering or Ramsden emulsions using nanoparticles as stabilizers. In this contribution, we explore the possibility of forming and stabilizing inverted or reverse systems, that is, dispersions of hydrophilic LC phases in an excess oil phase like tetradecane. Our aim was to change from oil-in-water emulsions to water-in-oil emulsions, where the water phase is a LC phase in equilibrium with excess oil and where the oil is nonpolar, for example, an alkane. This work consists of three parts: (1) to find a hexagonal hydrophilic LC phase that can not only incorporate a certain amount of tetradecane but can also coexist with excess tetradecane in the case of higher oil concentration, (2) to find a suitable stabilizer-either polymeric or nanoparticle type-that can stabilize the emulsion without destroying the hexagonal LC phase, and finally (3) to check the stability of this reverse hexosome emulsion. We discovered that it is possible to create a hexagonal hydrophilic LC phase with short-chain nonionic surfactants such as polyethylene glycol alkyl ethers or with high-molecular-weight TB copolymers of type A-B-A. Furthermore, it is possible to successfully stabilize the reverse hexosomes with low hydrophilic-lipophilic balance TB copolymers-either synthesized in our laboratory or commercially available ones-as well as with hydrophobized, commercially available silica nanoparticles.

Construction and Characterization of a Novel Sustained-Release Delivery System for Hydrophobic Pesticides Using Biodegradable Polydopamine-Based Microcapsules

Microcapsule formulations have been highly desirable and widely developed for effective utilization of pesticides and environmental pollution reduction. However, commercial and traditional microcapsule formulations of λ-cyhalothrin (LC) were prepared by complicated synthesis procedures and thereby specific organic solvents were needed. In this work, LC was encapsulated into versatile, robust, and biodegradable polydopamine (PDA) microcapsules by self-polymerization of dopamine. LC-loaded PDA microcapsules were characterized by transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and thermogravimetric analysis measurements (TGA). LC-loaded PDA microcapsules have uniform morphology with nanoscale, decent LC loading content (>50.0% w/w), and good physicochemical stability and sustained release properties. The bioassay against housefly ( Musca domestica) showed that the bioactivity and long-term efficiency of LC-loaded PDA microcapsules was superior to that of the commercial formulation. All of these results demonstrated that LC-loaded PDA microcapsules could be applied as a commercial LC microcapsule formulation with fewer environmental side effects and higher effective delivery.

Cisplatin Encapsulation Generates Morphologically Different Multicompartments in the Internal Nanostructures of Nonlamellar Liquid-Crystalline Self-Assemblies

Cisplatin ( cis-diamminedichloroplatinum(II)) is among the most potent cytotoxic agents used in cancer chemotherapy. The encapsulation of cisplatin in lipid-based drug carriers has been challenging owing to its low solubility in both aqueous and lipid phases. Here, we investigated cisplatin encapsulation in nonlamellar liquid-crystalline (LC) nanodispersions formed from a ternary mixture of phytantriol (PHYT), vitamin E (Vit E), and an anionic phospholipid [either phosphatidylglycerol (DSPG) or phosphatidylserine (DPPS)]. We show an increase in cisplatin encapsulation efficiency (EE) in nanodispersions containing 1.5-4 wt % phospholipid. The EE was highest in DPPS-containing nanodispersions (53-98%) compared to DSPG-containing counterparts (25-40%) under similar experimental conditions. Through structural and morphological characterizations involving synchrotron small-angle X-ray scattering and cryogenic transmission electron microscopy, we further show that varying the phospholipid content of cisplatin-free nanodispersions triggers an internal phase transition from a neat hexagonal (H₂) phase to a biphasic phase (internal H₂ phase coexisting with the lamellar (L_α) phase). However, cisplatin encapsulation in both DPPS- and DSPG-containing nanodispersions generates the coexistence of morphologically different multicompartments in the internal nanostructures comprising vesicles as a core, enveloped by an inverted-type surface bicontinuous cubic Im3 m (primitive, Q_II^P) phase or H₂ phase. We discuss the biophysical basis of these drug-induced morphological alterations and provide insights into the potential development of inverted-type LC nanodispersions for cisplatin delivery.

Liquid Crystalline Nanostructures as PEGylated Reservoirs of Omega-3 Polyunsaturated Fatty Acids: Structural Insights toward Delivery Formulations against Neurodegenerative Disorders

Omega-3 polyunsaturated fatty acids (ω-3 PUFAs) are bioactive lipids with considerable impact in medicine and nutrition. These compounds exert structuring effects on the cellular membrane organization, regulate the gene expression, and modulate various signaling cascades and metabolic processes. The purpose of the present work is to demonstrate the structural features of ω-3 PUFA-containing three-dimensional supramolecular lipid assemblies suitable for pharmaceutical applications that require soft porous carriers. We investigate the liquid crystalline structures formed upon mixing of eicosapentaenoic acid (EPA, 20:5) with the lyotropic nonlamellar lipid monoolein and the formation of multicompartment assemblies. Starting with the monoolein-based lipid cubic phase, double membrane vesicles, cubosome precursors, sponge-type particles (spongosomes), mixed intermediate nonlamellar structures, and multicompartment assemblies are obtained through self-assembly at different amphiphilic compositions. The dispersions containing spongosomes as well as nanocarriers with oil and vesicular compartments are stabilized by PEGylation of the lipid/water interfaces using a phospholipid with a poly(ethylene glycol) chain. The microstructures of the bulk mixtures were examined by cross-polarized light optical microscopy. The dispersed liquid crystalline structures and intermediate states were studied by small-angle X-ray scattering, cryogenic transmission electron microscopy, and quasielastic light scattering techniques. They established that PUFA influences the phase type and the sizes of the aqueous compartments of the liquid crystalline carriers. The resulting multicompartment systems and stealth nanosponges may serve as mesoporous reservoirs for coencapsulation of ω-3 PUFA (e.g., EPA) with water-insoluble drugs and hydrophilic macromolecules toward development of combination treatment strategies of neurodegenerative and other diseases.

Low-pH-Induced Lamellar to Bicontinuous Primitive Cubic Phase Transition in Dioleoylphosphatidylserine/Monoolein Membranes

Electrostatic interactions (EIs) play important roles in the structure and stability of inverse bicontinuous cubic (Q_II) phases of lipid membranes. We examined the effect of pH on the phase of dioleoylphosphatidylserine (DOPS)/monoolein (MO) membranes at low ionic strengths using small-angle X-ray scattering (SAXS). We found that the phase transitions from lamellar liquid-crystalline (L_α) to primitive cubic (Q_II^P) phases in DOPS/MO (2/8 molar ratio) membranes occurred in buffers containing 50 mM NaCl at and below the final pH of 2.75 as the pH of the membrane suspension was decreased from a neutral value. The kinetic pathway of this transition was revealed using time-resolved SAXS with a stopped-flow apparatus. The first step is a rapid transition from the L_α phase to the hexagonal II (H_II) phase, and the second step is a slow transition from the H_II phase to the Q_II^P phase. We determined the rate constants of the first step, k₁, and of the second step, k₂, by analyzing the time course of SAXS intensities quantitatively. The k₁ value increased with temperature. The analysis of this result provided the values of its apparent activation energy, which were constant over temperature but increased with pH. This can be explained by an EI effect on the free energy of the transition state. In contrast, the k₂ value decreased with temperature, indicating that the true activation energy increased with temperature. These experimental results were analyzed using the theory of the activation energy of phase transitions of lipid membranes when the free energy of the transition state depends on temperature. On the basis of these results, we discussed the mechanism of this phase transition.

Direct demonstration of lipid phosphorylation in the lipid bilayer of the biomimetic bicontinuous cubic phase using the confined enzyme lipid A phosphoethanolamine transferase

Retention of amphiphilic protein activity within the lipid bilayer membrane of the nanostructured biomimetic bicontinuous cubic phase is crucial for applications utilizing these hybrid protein-lipid self-assembly materials, such as in meso membrane protein crystallization and drug delivery. Previous work, mainly on soluble and membrane-associated enzymes, has shown that enzyme activity may be modified when immobilized, including membrane bound enzymes. The effect on activity may be even greater for amphiphilic enzymes with a large hydrophilic domain, such as the Neisserial enzyme lipid A phosphoethanolamine transferase (EptA). Encapsulation within the biomimetic but non-endogenous lipid bilayer membrane environment may modify the enzyme conformation, while confinement of the large hydrophilic domain with the nanoscale water channels of a continuous lipid bilayer structure may prevent full function of this enzyme. Herein we show that NmEptA remains active despite encapsulation within a nanostructured bicontinuous cubic phase. Full transfer of the phosphoethanolamine (PEA) group from a 1,2-dioleoyl-glycero-phosphoethanolamine (DOPE) doped lipid to monoolein (MO), which makes up the bicontinuous cubic phase, is shown. The reaction was found to be non-specific to the alkyl chain identity. The observed rate of enzyme activity is similar to other membrane bound enzymes, with complete transfer of the PEA group occurring in vitro, under the conditions studied, over a 24 hour timescale.

The nanoscience behind the art of in-meso crystallization of membrane proteins

The structural changes occurring at the nanoscale level within the lipid bilayer and driving the in-meso formation of large well-diffracting membrane protein crystals have been uniquely characterized for a model membrane protein, intimin. Importantly, the order to order transitions taking place within the bilayer and the lipidic nanostructures required for crystal growth have been shown to be general, occurring for both the cubic and the sponge mesophase crystallization pathways. For the first time, a transient fluid lamellar phase has been observed and unambiguously assigned for both crystallization pathways, present at the earliest stages of protein crystallogenesis but no longer observed once the crystals surpass the size of the average lyotropic liquid crystalline domain. The reported time-resolved structural investigation provides a significantly improved and general understanding of the nanostructural changes taking place within the mesophase during in-meso crystallization which is a fundamental advance in the enabling area of membrane protein structural biology.

An Abraded Surface of Doxorubicin-Loaded Surfactant-Containing Drug Delivery Systems Effectively Reduces the Survival of Carcinoma Cells

An effective antitumor remedy is yet to be developed. All previous approaches for a targeted delivery of anticancer medicine have relied on trial and error. The goal of this study was to use structural insights gained from the study of delivery systems and malignant cells to provide for a systematic approach to the development of next-generation drugs. We used doxorubicin (Dox) liposomal formulations. We assayed for cytotoxicity via the electrical current exclusion method. Dialysis of the samples yielded information about their drug release profiles. Information about the surface of the delivery systems was obtained through synchrotron small-angle X-ray scattering (SAXS) measurements. SAXS measurements revealed that Dox-loading yielded an abraded surface of our Dox liposomal formulation containing soybean oil, which also correlated with an effective reduction of the survival of carcinoma cells. Furthermore, a dialysis assay revealed that a higher burst of Dox was released from soybean oil-containing preparations within the first five hours. We conclude from our results that an abraded surface of Dox-loaded drug delivery system increases their efficacy. The apparent match between surface geometry of drug delivery systems and target cells is suggested as a steppingstone for refined development of drug delivery systems. This is the first study to provide a systematic approach to developing next-generation drug carrier systems using structural insights to guide the development of next-generation drug delivery systems with increased efficacy and reduced side effects.

Mesoporous self-assembled nanoparticles of biotransesterified cyclodextrins and nonlamellar lipids as carriers of water-insoluble substances

Soft mesoporous hierarchically structured particles were created by the self-assembly of an amphiphilic deep cavitand cyclodextrin βCD-nC₁₀ (degree of substitution n = 7.3), with a nanocavity grafted by multiple alkyl (C₁₀) chains on the secondary face of the βCD macrocycle through enzymatic biotransesterification, and the nonlamellar lipid monoolein (MO). The effect of the non-ionic dispersing agent polysorbate 80 (P80) on the liquid crystalline organization of the nanocarriers and their stability was studied in the context of vesicle-to-cubosome transition. The coexistence of small vesicular and nanosponge membrane objects with bigger nanoparticles with inner multicompartment cubic lattice structures was established as a typical feature of the employed dispersion process. The cryogenic transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) structural analyses revealed the dependence of the internal organization of the self-assembled nanoparticles on the presence of embedded βCD-nC₁₀ deep cavitands in the lipid bilayers. The obtained results indicated that the incorporated amphiphilic βCD-nC₁₀ building blocks stabilize the cubic lattice packing in the lipid membrane particles, which displayed structural features beyond the traditional CD nanosponges. UV-Vis spectroscopy was employed to characterize the nanoencapsulation of a model hydrophobic dimethylphenylazo-naphthol guest compound (Oil red) in the created nanocarriers. In perspective, these dual porosity carriers should be suitable for co-encapsulation and sustained delivery of peptide, protein or siRNA biopharmaceuticals together with small molecular weight drug compounds or imaging agents.

Protein-Based Graphene Biosensors: Optimizing Artificial Chemoreception in Bilayer Lipid Membranes

Proteinaceous moieties are critical elements in most detection systems, including biosensing platforms. Their potential is undoubtedly vast, yet many issues regarding their full exploitation remain unsolved. On the other hand, the biosensor formats with the higher marketability probabilities are enzyme in nature and electrochemical in concept. To no surprise, alternative materials for hosting catalysis within an electrode casing have received much attention lately to demonstrate a catalysis-coated device. Graphene and ZnO are presented as ideal materials to modify electrodes and biosensor platforms, especially in protein-based detection. Our group developed electrochemical sensors based on these nanomaterials for the sensitive detection of cholesterol using cholesterol oxidase incorporated in stabilized lipid films. A comparison between the two platforms is provided and discussed. In a broader sense, the not-so-remote prospect of quickly assembling a protein-based flexible biosensing detector to fulfill site-specific requirements is appealing to both university researchers and industry developers.

Responsive self-assembled nanostructured lipid systems for drug delivery and diagnostics

While stimuli-responsive polymers have received a huge amount of attention in the literature, responsive lipid-based mesophase systems offer unique opportunities in biomedical applications such as drug delivery and biosensing. The different mesophase equilibrium structures enables dynamic switching between nanostructures to facilitate drug release or as a transducer for recognition events. In drug delivery, this behavior offers researchers the means to deliver a therapeutic payload at a specific rate and time i.e. 'on-demand'. This review summarizes the distinctive features of these multifaceted materials and aggregates the current state of the art research from our groups and others into the use of these materials as bulk gels and nanostructured dispersions for drug delivery, biosensing and diagnostics.

Effect of fullerene on the dispersibility of nanostructured lipid particles and encapsulation in sterically stabilized emulsions

We report on the effect of fullerenes (C60) on the stability of nanostructured lipid emulsions. These (oil-in-water) emulsions are essentially aqueous dispersions of lipid particles exhibiting self-assembled nanostructures at their cores. The majority of previous studies on fullerenes were focused on planar and spherical lipid bilayer systems including pure lipids and liposomes. In this work, fullerenes were interacted with a lipid that forms nanostructured dispersions of non-lamellar self-assemblies. A range of parameters including the composition of emulsions and sonication parameters were examined to determine the influence of fullerenes on in-situ and pre-stabilized lipid emulsions. We found that fullerenes mutually stabilize very low concentrations of lipid molecules, while other concentration emulsions struggle to stay stable or even to form at first instance; we provide hypotheses to support these observations. Interestingly though, we were able to encapsulate varying amounts of fullerenes in sterically stabilized emulsions. This step has a significant positive impact, as we could effectively control an inherent aggregation tendency of fullerenes in aqueous environments. These novel hybrid nanomaterials may open a range of avenues for biotechnological and biomedical applications exploiting properties of both lipid and fullerene nanostructures.

Swelling of Bicontinuous Cubic Phases in Guerbet Glycolipid: Effects of Additives

Inverse bicontinuous cubic phases of lyotropic liquid crystal self-assembly have received much attention in biomedical, biosensing, and nanotechnology applications. An Ia3d bicontinuous cubic based on the gyroid G-surface can be formed by the Guerbet synthetic glucolipid 2-hexyl-decyl-β-d-glucopyranoside (β-Glc-OC6C10) in excess water. The small water channel diameter of this cubic phase could provide nanoscale constraints in encapsulation of large molecules and crystallization of membrane proteins, hence stresses the importance of water channel tuning ability. This work investigates the swelling behavior of lyotropic self-assembly of β-Glc-OC6C10 which could be controlled and modulated by different surfactants as a hydration-modulating agent. Our results demonstrate that addition of nonionic glycolipid octyl-β-d-glucopyranoside (β-Glc-OC8) at 20 and 25 mol % gives the largest attainable cubic water channel diameter of ca. 62 Å, and formation of coacervates which may be attributed to a sponge phase were seen at 20 mol % octyl-β-d-maltopyranoside (β-Mal-OC8). Swelling of the cubic water channel can also be attained in charged surfactant-doped systems dioctyl sodium sulfosuccinate (AOT) and hexadecyltrimethylammonium bromide (CTAB), of which phase transition occurred from cubic to a lamellar phase. Destabilization of the cubic phase to an inverse hexagonal phase was observed when a high amount of charged lecithin (LEC) and stearylamine (SA) was added to the lipid self-assembly.

NIR-Remote Selected Activation Gene Expression in Living Cells by Upconverting Microrods

An NIR-controlled gene expression system based on upconverting rods (UCRs) is demonstrated. The UCRs can harvest the "biocompatible" NIR light and convert it into local UV light, resulting in cleavage of the photosensitive molecule (4-(hydroxymethyl)-3-nitrobenzoic acid, ONA) and on-demand release of gene carriers, thus realizing target gene expression at high spatial and temporal resolutions.

Cubosomes and hexosomes as versatile platforms for drug delivery

Nonlamellar liquid crystalline phases are attractive platforms for drug solubilization and targeted delivery. The attractiveness of this formulation principle is linked to the nanostructural versatility, compatiblity, digestiblity and bioadhesive properties of their lipid constituents, and the capability of solubilizing and sustaining the release of amphiphilic, hydrophobic and hydrophilic drugs. Nonlamellar liquid crystalline phases offer two distinct promising strategies in the development of drug delivery systems. These comprise formation of ISAsomes (internally self-assembled ‘somes’ or particles) such as cubosomes and hexosomes, and in situ formation of parenteral dosage forms with tunable nanostructures at the site of administration. This review outlines the unique features of cubosomes and hexosomes and their potential utilization as promising platforms for drug delivery.

Nanomedical innovation: the SEON-concept for an improved cancer therapy with magnetic nanoparticles

Nanomedicine offers tremendous opportunities for the development of novel therapeutic and diagnostic tools. During the last decades, extensive knowledge was gained about stabilizing and the coating of nanoparticles, their functionalization for drug binding and drug release and possible strategies for therapies and diagnostics of different diseases. Most recently, more and more emphasis has been placed on nanotoxicology and nanosafety aspects. The section of experimental oncology and nanomedicine developed a concept for translating this knowledge into clinical application of magnetic drug targeting for the treatment of cancer and other diseases using superparamagnetic iron oxide nanoparticles. This approach includes reproducible synthesis, detailed characterization, nanotoxicological testing, evaluation in ex vivo models, preclinical animal studies and production of superparamagnetic iron oxide nanoparticles according to good manufacturing practice regulations.

Phase behaviour of the ternary system: monoolein-water-branched polyethylenimine

Addition of a branched polymer, polyethyleneimine, significantly alters the organization of a glycerol monooleate (GMO) lipid-water system. We present detailed data over a wide range of compositions (water content from 10 to 40%, relative to GMO and PEI fractions from 0 to 4%) and temperatures (25-80 °C). The PEI molecular weight effects are examined using polymers over a range from 0.8 to 25 kDa. Addition of PEI induces the formation of higher curvature reverse phases. In particular, PEI induces the formation of the Fd3m phase: a discontinuous phase comprising reverse micelles of two different sizes stacked in a cubic AB2 crystal. The formation of the Fd3m phase at room temperature, upon addition of polar, water soluble PEI is unusual, since such phases typically are formed only upon addition of apolar oils. The largest stability window for the Fd3m phase is observed for PEI with a molecular weight = 2 kDa. We discuss how PEI influences the formation and stability of high curvature phases.

Compact polar moieties induce lipid-water systems to form discontinuous reverse micellar phase

The role of molecular interactions in governing lipid mesophase organization is of fundamental interest and has technological implications. Herein, we describe an unusual pathway for monoolein/water reorganization from a bicontinuous mesophase to a discontinuous reverse micellar assembly, directed by the inclusion of polar macromolecules. This pathway is very different from those reported earlier, wherein the Fd3m phase formed only upon addition of apolar oils. Experiments and molecular dynamics simulations indicate that hydrophilic ternary additives capable of inducing discontinuous phase formation must (i) interact strongly with the monoolein head group and (ii) have a compact molecular architecture. We present a detailed investigation that contrasts a monoolein-water system containing polyamidoamine (PAMAM) dendrons with one containing their linear analogs. The Fd3m phase forms only on the addition of PAMAM dendrons but not their linear analogs. Thus, the dendritic architecture of PAMAM plays an important role in determining lipid mesophase behavior. Both dendrons and their linear analogs interact strongly with monoolein through their amine groups. However, while linear polymers adsorb and spread on monoolein, dendrons form aggregates that interact with the lipid. Dendrons induce formation of an intermediate reverse hexagonal phase, which subsequently restructures into the Fd3m phase. Finally, we demonstrate that other additives with compact structures that are known to interact with monoolein, such as branched polyethylenimine and polyhedral silsesquioxane cages, also induce the formation of the Fd3m phase.

Identification of large channels in cationic PEGylated cubosome nanoparticles by synchrotron radiation SAXS and Cryo-TEM imaging

Extra-large nanochannel formation in the internal structure of cationic cubosome nanoparticles results from the interplay between charge repulsion and steric stabilization of the lipid membrane interfaces and is evidenced by cryogenic transmission electron microscopy (Cryo-TEM) and synchrotron radiation small-angle X-ray scattering (SAXS). The swollen cubic symmetry of the lipid nanoparticles emerges through a shaping transition of onion bilayer vesicle intermediates containing a fusogenic nonlamellar lipid. Cationic amphiphile cubosome particles, thanks to the advantages of their liquid crystalline soft porous nanoarchitecture and capability for multi-drug nanoencapsulation, appear to be of interest for the design of mitochondrial targeting devices in anti-cancer therapies and as siRNA nanocarriers for gene silencing.

Effect of protein incorporation on the nanostructure of the bicontinuous microemulsion phase of Winsor-III systems: a small-angle neutron scattering study

Small-angle neutron scattering (SANS) analysis using the Teubner-Strey model has been employed to evaluate the effect of protein incorporation into the middle, bicontinuous microemulsion (BμE) phase of Winsor-III (WIII) systems formed by an aerosol-OT (AOT)/alkyl ethoxylate mixed surfactant system to understand better the extraction of proteins into and out of BμEs and to study the effect of proteins on a system that serves as a biomimetic analog of cell membranes. Under conditions of high salinity, the incorporation of positively charged proteins cytochrome c, lysozyme, and α-chymotrypsin, near their solubilization limit in the BμEs promoted the release of water and oil from the BμEs, a decrease in the quasi-periodic repeat distance (d), an increase in ordering (a decrease in the amphiphilicity factor, fa) for the surfactant monolayers, and a decrease in the surface area per surfactant headgroup, suggesting that the proteins affected the self-assembly of components in the BμE phase and produced Debye shielding of AOT's sulfonate headgroup. For WIII systems possessing lower salinity, cytochrome c reduced the efficiency of surfactant in the BμE phase, noted by increases in d and fa, suggesting that the enzyme and AOT underwent ion pairing. The results of this study demonstrate the importance of ionic strength to modulate protein-surfactant interactions, which in turn will control the release of proteins encapsulated in the BμEs, relevant to WIII-based protein extraction and controlled release from BμE delivery systems, and demonstrate the utility of BμEs as a model system to understand the effect of proteins on biomembranes.

Sterically stabilized spongosomes for multidrug delivery of anticancer nanomedicines

SAXS patterns of drug-loaded lipid nanocarriers stabilized by polysorbate P80 (left); cryo-TEM image of BAI-BJO-spongosomes-2 (right).

Nano-Assemblies of Modified Cyclodextrins and Their Complexes with Guest Molecules: Incorporation in Nanostructured Membranes and Amphiphile Nanoarchitectonics Design

A variety of cyclodextrin-based molecular structures, with substitutions of either primary or secondary faces of the natural oligosaccharide macrocycles of α-, β-, or γ-cyclodextrins, have been designed towards innovative applications of self-assembled cyclodextrin nanomaterials. Amphiphilic cyclodextrins have been obtained by chemical or enzymatic modifications of their macrocycles using phospholipidyl, peptidolipidyl, cholesteryl, and oligo(ethylene oxide) anchors as well as variable numbers of grafted hydrophobic hydrocarbon or fluorinated chains. These novel compounds may self-assemble in an aqueous medium into different types of supramolecular nanoassemblies (vesicles, micelles, nanorods, nanospheres, and other kinds of nanoparticles and liquid crystalline structures). This review discusses the supramolecular nanoarchitectures, which can be formed by amphiphilic cyclodextrin derivatives in mixtures with other molecules (phospholipids, surfactants, and olygonucleotides). Biomedical applications are foreseen for nanoencapsulation of drug molecules in the hydrophobic interchain volumes and nanocavities of the amphiphilic cyclodextrins (serving as drug carriers or pharmaceutical excipients), anticancer phototherapy, gene delivery, as well as for protection of instable active ingredients through inclusion complexation in nanostructured media.

Initial step of pH-jump-induced lamellar to bicontinuous cubic phase transition in dioleoylphosphatidylserine/monoolein

Electrostatic interactions (EI) are an important factor for phase transitions between lamellar liquid-crystalline (L(α)) and inverse bicontinuous cubic (Q(II)) phases. We investigated the low pH-induced L(α) to double-diamond cubic (Q(II)(D)) phase transition in dioleoylphosphatidylserine (DOPS)/monoolein (MO) using time-resolved small-angle X-ray scattering. Using a stopped-flow apparatus, a suspension of liposomes (multilamellar vesicles (MLVs) or large unilamellar vesicles (LUVs)) of 20%-DOPS/80%-MO membrane at neutral pH was rapidly mixed with a low pH buffer, and then the structural change of the membranes in the resultant suspension was observed as a function of time (i.e., pH-jump experiment). At the initial step, the L(α) phase was directly transformed into the hexagonal II (H(II)) phase, and subsequently, the H(II) phase slowly converted into the Q(II)(D) phase. We obtained the rate constants of the initial step (i.e., the L(α) to H(II) phase transition) and of the second step (i.e., the H(II) to Q(II)(D) phase transition) using the non-negative matrix factorization method. The rate constant of the initial step was independent of the MLV concentration, indicating that single MLVs can convert into the HII phase without any interaction with other MLVs. On the other hand, the rate constant of the initial step increased with a decrease in pH, 0.041 s(-1) at pH 2.6 and 0.013 s(-1) at pH 2.8, and also exhibited a size dependence; for smaller vesicles such as LUVs and smaller MLVs with diameters of ~1 μm, the rate constant was smaller. They were reasonably explained by the classical nucleation theory. These results provide the first experimental evidence of the total kinetics of EI-induced L(α)/Q(II) phase transitions.

Multicompartment lipid cubic nanoparticles with high protein upload: millisecond dynamics of formation

Membrane shapes, produced by dynamically assembled lipid/protein architectures, are crucial for both physiological functions and the design of therapeutic nanotechnologies. Here we investigate the dynamics of lipid membrane-neurotrophic BDNF protein complexes formation and ordering in nanoparticles, with the purpose of innovation in nanostructure-based neuroprotection and biomimetic nanoarchitectonics. The kinetic pathway of membrane states associated with rapidly occurring nonequilibrium self-assembled lipid/protein nanoarchitectures was determined by millisecond time-resolved small-angle X-ray scattering (SAXS) at high resolution. The neurotrophin binding and millisecond trafficking along the flexible membranes induced an unusual overlay of channel-network architectures including two coexisting cubic lattices epitaxially connected to lamellar membrane stacks. These time-resolved membrane processes, involving intercalation of discrete stiff proteins in continuous soft membranes, evidence stepwise curvature control mechanisms. The obtained three-phase liquid-crystalline nanoparticles of neurotrophic composition put forward important advancements in multicompartment soft-matter nanostructure design.

Generation of geometrically ordered lipid-based liquid-crystalline nanoparticles using biologically relevant enzymatic processing

High-symmetry lipid nanoparticles with internal bicontinuous cubic phase structure (cubosomes) are prepared from a simple emulsion containing a mixture of a nondigestible lipid (phytantriol) and a digestible short-chained triglyceride using enzymatic lipolysis of the incorporated short-chained triglyceride. The lipolytic products partition away from the nondigestible lipid, resulting in crystallization of the cubic-phase internal structure. Time-resolved small-angle X-ray scattering revealed the kinetics of the disorder-to-order transition, with cryo-transmission electron microscopy showing an absence of liposomes. The new approach offers a new "sideways" method for the generation of lipid-based nanostructured materials that avoids the problems of top-down and bottom-up approaches.

Characterization and cytotoxicity studies on liposome-hydrophobic magnetite hybrid colloids

The aim of this study was to highlight the main features of magnetoliposomes prepared by TLE, using hydrophobic magnetite, and stabilized with oleic acid, instead of using the usual hydrophilic magnetite surrounded by sodium citrate. These biocompatible magnetoliposomes (MLs) were prepared with the purpose of producing a magnetic carrier capable of loading either hydrophilic or lipophilic drugs. The effect of different liposome/magnetite weight ratios on the stability of magnetoliposomes was evaluated by monitoring the mean diameter of the particles, their polydispersity index, and zeta potential over time. The prepared magnetoliposomes showed a high liposome-magnetite association, with magnetoliposomes containing PEG (polyethylene glycol) showing the best magnetite loading values. To verify the position of magnetite nanoparticles in the vesicular structures, the morphological characteristics of the structures were studied using transmission electron microscopy (TEM). TEM studies showed a strong affinity between hydrophobic magnetite nanoparticles, the surrounding oleic acid molecules, and phospholipids. Furthermore, the concentration above which one would expect to find a cytotoxic effect on cells as well as morphological cell-nanoparticle interactions was studied in situ by using the trypan blue dye exclusion assay, and the Prussian Blue modified staining method.

Lipid transfer between submicrometer sized Pickering ISAsome emulsions and the influence of added hydrogel

Transfer of lipids between droplets in Pickering emulsions has been studied by time-resolved small-angle X-ray scattering (SAXS). The special features of self-assembled liquid-crystalline phases have been applied to examine the kinetics of internal phase reorganization imposed by lipid release and uptake by the droplets. The findings reveal faster transfer kinetics in Pickering emulsions than in emulsions stabilized with Pluronic F127. It is shown that the transfer kinetics can be accelerated by adding free surfactant to the dispersions and that this acceleration becomes more dominant when micelles are formed. The effect of immobilization of the droplets has been studied by incorporating them into the appropriate hydrogel network. The droplets are arrested, and the transfer slows down significantly at high enough concentrations of the hydrogel where nonergodic systems are obtained.

Lipid transfer in oil-in-water isasome emulsions: influence of arrested dynamics of the emulsion droplets entrapped in a hydrogel

The transfer kinetics of lipids between internally self-assembled droplets of O/W emulsions is studied. The droplets (isasomes) consist of various liquid-crystalline phases or W/O microemulsions stabilized by a polymeric stabilizer F127. The various internal phases were identified by the relative peak positions in the small-angle X-ray scattering (SAXS) curves. An arrested system composed of isasomes embedded in a gel matrix actually provides an additional possibility to control these systems in terms of the release of various host molecules. These experiments have been applied to examine the kinetics of the internal phase reorganization imposed by the lipids' release and uptake by the droplets embedded in a κ-carrageenan (KC) hydrogel network. Increasing the concentration of the gelling agent slows down the transfer from one droplet to the other through the aqueous phase. We examined the region where the free diffusion is stopped. i.e., the point where the system changes from the ergodic to the nonergodic state and the kinetics is essentially slowed down. This effect can be balanced by the addition of small amounts of free polymeric stabilizer, which speeds up the kinetics. This is even possible in the case of highly arrested dynamics of the emulsion droplets, as found for the highest KC hydrogel concentrations forming nonergodic systems.

Cubic and sponge phases in ether lipid-solvent-water ternary systems: phase behavior and NMR characterization

The phase behavior of 1-glyceryl monoleyl ether (GME) in mixtures of water and the solvents 1,5-pentanediol (POL) or N-methyl-2-pyrrolidone (NMP) was investigated by ocular inspection, polarization microscopy, and small-angle X-ray diffraction (SAXD). Phase diagrams were constructed based on analyses of more than 200 samples prepared using the two different solvents at 20 °C. The inverse hexagonal phase formed by GME in excess of water was transformed into the cubic and sponge phase with the increasing amount of each solvent. Particularly POL allowed for the formation of an extended sponge phase area in the phase diagram, comprising up to 70% POL-water mixture. The phase behavior using NMP was found to be similar to the earlier investigated solvent propylene glycol. The extended sponge phase for the POL system was attributed to POLs strong surface/interfacial activity with the potential to stabilize the polar/apolar interface of the sponge phase. The cubic and sponge phases formed using POL were further studied by NMR in order to measure the partitioning of POL between the lipid and aqueous domains of the phases. The domain partition coefficient K (lipid domain/aqueous domain) for POL in cubic and sponge phases was found to be 0.78 ± 0.14 and constant for the two phases.