Porous Au Nanoparticles with Tunable Plasmon Resonances and Intense Field Enhancements for Single-Particle SERS

A Mechanism Underpinning the Bioenergetic Metabolism-Regulating Function of Gold Nanocatalysts

Bioenergetic deficits are known to be significant contributors to neurodegenerative diseases. Nevertheless, identifying safe and effective means to address intracellular bioenergetic deficits remains a significant challenge. This work provides mechanistic insights into the energy metabolism-regulating function of colloidal Au nanocrystals, referred to as CNM-Au8, that are synthesized electrochemically in the absence of surface-capping organic ligands. When neurons are subjected to excitotoxic stressors or toxic peptides, treatment of neurons with CNM-Au8 results in dose-dependent neuronal survival and neurite network preservation across multiple neuronal subtypes. CNM-Au8 efficiently catalyzes the conversion of an energetic cofactor, nicotinamide adenine dinucleotide hydride (NADH), into its oxidized counterpart (NAD+ ), which promotes bioenergy production by regulating the intracellular level of adenosine triphosphate. Detailed kinetic measurements reveal that CNM-Au8-catalyzed NADH oxidation obeys Michaelis-Menten kinetics and exhibits pH-dependent kinetic profiles. Photoexcited charge carriers and photothermal effect, which result from optical excitations and decay of the plasmonic electron oscillations or the interband electronic transitions in CNM-Au8, are further harnessed as unique leverages to modulate reaction kinetics. As exemplified by this work, Au nanocrystals with deliberately tailored structures and surfactant-free clean surfaces hold great promise for developing next-generation therapeutic agents for neurodegenerative diseases.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Synergistic Combination of Fermi Level Equilibrium and Plasmonic Effect for Formic Acid Dehydrogenation

Developing an efficient catalyst for formic acid (FA) dehydrogenation is a promising strategy for safe hydrogen storage and transportation. Herein, we successfully developed trimetallic NiAuPd heterogeneous catalysts through a galvanic replacement reaction and a subsequent chemical reduction process to boost hydrogen generation from FA decomposition at room temperature by coupling Fermi level engineering with plasmonic effect. We demonstrated that Ni worked as an electron reservoir to donate electrons to Au and Pd driven by Fermi level equilibrium whereas plasmonic Au served as an optical absorber to generate energetic hot electrons and a charge-redistribution mediator. Ni and Au worked cooperatively to promote the charge heterogeneity of surface-active Pd sites, leading to enhanced chemisorption of formate-related intermediates and eventually outstanding activity (342 mmol g^-1  h^-1 ) compared with bimetallic counterpart. This work offers excellent insight into the rational design of efficient catalysts for practical hydrogen energy exploitation.

Ultra-trace and quantitative SERS detection of polycyclic aromatic hydrocarbons based on Au nanoscale convex polyhedrons with embedded probe molecules

Surface-enhanced Raman scattering (SERS) has great potential for the detection of marine pollutants, but it is still restricted in ultra-trace and quantitative analysis. Here, a strategy for the detection of polycyclic aromatic hydrocarbons (PAHs) was proposed based on Au nanoscale convex polyhedrons (Au NCPs) coated with high-energy facets and embedded with 4-ATP as a probe molecule. Au NCPs acted as SERS substrates and led to limits of detection (LODs) for six common PAHs that reached 0.01 nM. Using internal calibration, the relative standard deviations (RSD) of the spectral stability and reproducibility were as low as 3.36% and 5.11%, respectively. The maximum mean relative errors (AREs) of the predicted and true values were 6.28%. The results indicate that the resulting Au NCPs improved the ultra-trace and quantitative detection of SERS, thus suggesting that the Au NCPs have practical application value in SERS.

Photochemical synthesis of pink silver and its use for monitoring peptide nitration via surface enhanced Raman spectroscopy (SERS)

Oxidative stress may cause extended tyrosine posttranslational modifications of peptides and proteins. The 3-nitro-L-tyrosine (Nit), which is typically formed, affects protein behavior during neurodegenerative processes, such as Alzheimer's and Parkinson's diseases. Such metabolic products may be conveniently detected at very low concentrations by surface enhanced Raman spectroscopy (SERS). Previously, we have explored the SERS detection of the Nit NO₂ bending vibrational bands in a presence of hydrogen chloride (Niederhafner et al., Amino Acids 53:517-532, 2021, ibid). In this article, we describe performance of a new SERS substrate, "pink silver", synthesized photochemically. It provides SERS even without the HCl induction, and the acid further decreases the detection limit about 9 times. Strong SERS bands were observed in the asymmetric (1550-1475 cm^-1) and symmetric (1360-1290 cm^-1) NO stretching in the NO₂ group. The bending vibration was relatively weak, but appeared stronger when HCl was added. The band assignments were supported by density functional theory modeling.

New Trends in Nanoarchitectured SERS Substrates: Nanospaces, 2D Materials, and Organic Heterostructures

This article reviews recent fabrication methods for surface-enhanced Raman spectroscopy (SERS) substrates with a focus on advanced nanoarchitecture based on noble metals with special nanospaces (round tips, gaps, and porous spaces), nanolayered 2D materials, including hybridization with metallic nanostructures (NSs), and the contemporary repertoire of nanoarchitecturing with organic molecules. The use of SERS for multidisciplinary applications has been extensively investigated because the considerably enhanced signal intensity enables the detection of a very small number of molecules with molecular fingerprints. Nanoarchitecture strategies for the design of new NSs play a vital role in developing SERS substrates. In this review, recent achievements with respect to the special morphology of metallic NSs are discussed, and future directions are outlined for the development of available NSs with reproducible preparation and well-controlled nanoarchitecture. Nanolayered 2D materials are proposed for SERS applications as an alternative to the noble metals. The modern solutions to existing limitations for their applications are described together with the state-of-the-art in bio/environmental SERS sensing using 2D materials-based composites. To complement the existing toolbox of plasmonic inorganic NSs, hybridization with organic molecules is proposed to improve the stability of NSs and selectivity of SERS sensing by hybridizing with small or large organic molecules.

Mesoporous Gold Nanostructures: Synthesis and Beyond

Mesoporous metal nanostructures have offered multiple advantages that cannot be realized elsewhere. These materials have been attracting more research attention in catalysis and electrocatalysis owing to their functional structures and compositions. Of the various mesoporous metals available, mesoporous gold (mesoAu) nanostructures are of special interest in surface-enhanced Raman scattering (SERS) and related applications because of their strong electromagnetic field (localized surface plasmon resonance). In the last few decades, various synthesis strategies have been developed to prepare mesoAu nanostructures with controllable morphologies that exhibit fascinating physicochemical properties and increase applications in SERS, catalysis, and electrocatalysis. In this Perspective, we systematically summarize recent advances in synthesis and applications of mesoAu nanostructures. Four synthesis strategies, including dealloying, nanocasting, electrochemical deposition, and intermediate template, are discussed in detail. Moreover, physicochemical properties and promising applications of mesoAu nanostructures are presented. Finally, we describe current challenges and give a general outlook to explore further directions in synthesis and applications of mesoAu nanostructures.

Porous Au-Ag Nanoparticles from Galvanic Replacement Applied as Single-Particle SERS Probe for Quantitative Monitoring

Plasmonic nanostructures have raised the interest of biomedical applications of surface-enhanced Raman scattering (SERS). To improve the enhancement and produce sensitive SERS probes, porous Au-Ag alloy nanoparticles (NPs) are synthesized by dealloying Au-Ag alloy NP-precursors with Au or Ag core in aqueous colloidal environment through galvanic replacement reaction. The novel designed core-shell Au-Ag alloy NP-precursors facilitate controllable synthesis of porous nanostructure, and dealloying degree during the reaction has significant effect on structural and spectral properties of dealloyed porous NPs. Narrow-dispersed dealloyed NPs are obtained using NPs of Au/Ag ratio from 10/90 to 40/60 with Au and Ag core to produce solid core@porous shell and porous nanoshells, having rough surface, hollowness, and porosity around 30-60%. The clean nanostructure from colloidal synthesis exhibits a redshifted plasmon peak up to near-infrared region, and the large accessible surface induces highly localized surface plasmon resonance and generates robust SERS activity. Thus, the porous NPs produce intensely enhanced Raman signal up to 68-fold higher than 100 nm AuNP enhancement at single-particle level, and the estimated Raman enhancement around 7800, showing the potential for highly sensitive SERS probes. The single-particle SERS probes are effectively demonstrated in quantitative monitoring of anticancer drug Doxorubicin release.

A flap endonuclease 1-assisted universal viral nucleic acid sensing system using surface-enhanced Raman scattering

Flap endonuclease 1 recognizes a specific DNA structure and cleaves Raman tag-labeled probe molecules in a target-specific manner. With SERS-based sensing, the developed detection approach produces sensitive, quantitative, and multiplexable signals.

Selective Enhancement of Surface and Bulk E-Field within Porous AuRh and AuRu Nanorods

A variety of multisegmented nanorods (NRs) composed of dense Au and porous Rh and Ru segments with lengths controlled down to ca. 10 nm are synthesized within porous anodic aluminum oxide membranes. Despite the high Rh and Ru porosity (i.e., ∼40%), the porous metal segments are able to efficiently couple with the longitudinal localized surface plasmon resonance (LSPR) of Au NRs. Finite-difference time-domain simulations show that the LSPR wavelength can be precisely tuned by adjusting the Rh and Ru porosity. Additionally, light absorption inside Rh and Ru segments and the surface electric field (E-field) at Rh and Ru can be independently and selectively enhanced by varying the position of the Rh and Ru segment within the Au NR. The ability to selectively control and decouple the generation of high-energy, surface hot electrons and low-energy, bulk hot electrons within photocatalytic metals such as Rh and Ru makes these bimetallic structures great platforms for fundamental studies in plasmonics and hot-electron science.

Quantitative 3D Characterization of Nanoporous Gold Nanoparticles by Transmission Electron Microscopy

Quantitative structural characterization of nanomaterials is important to tailor their functional properties. Corrosion of AgAu-alloy nanoparticles (NPs) results in porous structures, making them interesting for applications especially in the fields of catalysis and surface-enhanced Raman spectroscopy. For the present report, structures of dealloyed NPs were reconstructed three-dimensionally using scanning transmission electron microscopy tomography. These reconstructions were evaluated quantitatively, revealing structural information such as pore size, porosity, specific surface area, and tortuosity. Results show significant differences compared to the structure of dealloyed bulk samples and can be used as input for simulations of diffusion or mass transport processes, for example, in catalytic applications.

Influence of oxygen plasma treatment on structural and spectral changes in silica-coated gold nanorods studied using total internal reflection microscopy and spectroscopy

This paper shows how oxygen plasma treatment affects the structural, localized surface plasmon resonance (LSPR) spectral, and spatial orientation changes in single gold nanorods coated with a mesoporous silica shell (AuNRs@SiO2) in comparison with bare AuNRs with the same aspect ratio (AR). Single AuNRs@SiO2 subjected to different plasma treatment times were characterized using scanning electron microscopy and total internal reflection scattering (TIRS) microscopy and spectroscopy. The AR of the single AuNRs without a silica shell was decreased by structural deformation, while their LSPR linewidth was increased with increasing plasma treatment time. In contrast, single AuNRs@SiO2 showed much higher structural and spectral stability due to the silica shell under the energetic plasma treatment. Furthermore, there was no noticeable variation in the three-dimensional (3D) orientations of single AuNR cores in the silica shell before and after the plasma treatment. The results support that no significant structural and spectral changes occur in single AuNRs@SiO2 and that the silica coating enhances the stability of AuNR cores against oxygen plasma treatment. Therefore, fundamental information on the relationship among plasma treatment time, structural change, LSPR damping, and defocused orientation patterns is provided at the single-particle level.

Surface topography and free energy regulate osteogenesis of stem cells: effects of shape-controlled gold nanoparticles

The surface free energy of a biomaterial plays an important role in the early stages of cell-biomaterial interactions, profoundly influencing protein adsorption, interfacial water accessibility, and cell attachment on the biomaterial surface. Although multiple approaches have been developed to engineer the surface free energy of biomaterials, systematically tuning their surface free energy without altering other physicochemical properties remains challenging. In this study, we constructed an array of chemically-equivalent surfaces with comparable apparent roughness through assembly of gold nanoparticles adopting various geometrically-distinct shapes but all capped with the same surface ligand, (1-hexadecyl)trimethylammonium chloride, on cell culture substrates. We found that bone marrow stem cells exhibited distinct osteogenic differentiation behaviours when interacting with different types of substrates comprising shape-controlled gold nanoparticles. Our results reveal that bone marrow stem cells are capable of sensing differences in the nanoscale topographical features, which underscores the role of the surface free energy of nanostructured biomaterials in regulating cell responses. The study was approved by Institutional Animal Care and Use Committee, School of Medicine, University of South Carolina.

Antibacterial Activity of Porous Gold Nanocomposites via NIR Light-Triggered Photothermal and Photodynamic Effects

Phototherapeutic approaches, including photothermal therapy (PTT) and photodynamic therapy (PDT), have become a promising strategy to combat microbial pathogens and tackle the crisis brought about by antibiotic-resistant strains. Herein, porous gold nanoparticles (AuPNs) were synthesized as photothermal agents and loaded with indocyanine green (ICG), a common photosensitizer for PDT, to fabricate a nanosystem presenting near-infrared (NIR) light-triggered synchronous PTT and PDT effects. The AuPNs can not only convert NIR light into heat with a high photothermal conversion efficiency (50.6-68.5%), but also provide a porous structure to facilely load ICG molecules. The adsorption of ICG onto AuPNs was mainly driven by electrostatic and hydrophobic interactions with the surfactant layer of AuPNs, and the aggregate state of ICG significantly enhanced its generation of reactive oxygen species. Moreover, taking advantage of its synergistic PTT and PDT effect, the hybrid nanocomposites displayed a remarkable antibacterial effect to the gram-positive pathogen Staphylococcus aureus (S. aureus) upon 808 nm laser irradiation.

Nanoporous Metals: From Plasmonic Properties to Applications in Enhanced Spectroscopy and Photocatalysis

The field of plasmonics is capable of enabling interesting applications in different wavelength ranges, spanning from the ultraviolet up to the infrared. The choice of plasmonic material and how the material is nanostructured has significant implications for ultimate performance of any plasmonic device. Artificially designed nanoporous metals (NPMs) have interesting material properties including large specific surface area, distinctive optical properties, high electrical conductivity, and reduced stiffness, implying their potentials for many applications. This paper reviews the wide range of available nanoporous metals (such as Au, Ag, Cu, Al, Mg, and Pt), mainly focusing on their properties as plasmonic materials. While extensive reports on the use and characterization of NPMs exist, a detailed discussion on their connection with surface plasmons and enhanced spectroscopies as well as photocatalysis is missing. Here, we report on different metals investigated, from the most used nanoporous gold to mixed metal compounds, and discuss each of these plasmonic materials' suitability for a range of structural design and applications. Finally, we discuss the potentials and limitations of the traditional and alternative plasmonic materials for applications in enhanced spectroscopy and photocatalysis.

Unidirectional/Bidirectional Electron Transfer at the Au/TiO2 Interface Operando Tracked by SERS Spectra from Au and TiO2

Although it is well-known that the size can influence the surface plasmon resonance property of coinage metals and the electronic state of the Mott-Schottky junction formed at the metal/semiconductor interface, insights into how the size can be exploited to optimize the photocatalytic activity and selectivity of metal/semiconductor composites are lacking. Here we utilize operando SERS spectroscopy to identify the size effect on the electron-transfer dynamics and the direction at the Au/TiO₂ interface. This effect was characterized by the photocatalytic reduction sites of p-nitrothiophenol, which were self-tracked with the SERS spectra from Au nanoparticle and inverse-opal structured TiO₂, respectively. The size-dependent unidirectional/bidirectional transfer of photoinduced electrons at the Au/TiO₂ interface was revealed by operando SERS spectroscopy, which enables the rational tuning of the reduction selectivity.

Synthesis of porous Au–Ag alloy nanorods with tunable plasmonic properties and intrinsic hotspots for surface-enhanced Raman scattering

The tunability of longitudinal plasmonic bands of P-AuAgNRs is realized to cover a wide range of wavelengths. P-AuAgNRs exhibit numerous internal hotspots which favor highly sensitive surface-enhanced Raman scattering detection.

Impact of porous nanomaterials on inhibiting protein aggregation behaviour

Aggregation of intrinsically disordered as well as the ordered proteins under certain premises or physiological conditions leads to pathological disorder. Here we have presented a detailed investigation on the effect of a porous metallic (Au) and a non-metallic (Si) nanomaterial on the formation of ordered (fiber-like/amyloid) and disordered (amorphous) aggregates of proteins. Porous nanogold (PNG) was found to reduce the amyloid aggregation of insulin but does not have much impact on the lag phase in the aggregation kinetics, whereas porous nano-silica (PNS) was found both to decrease the amount of aggregation as well as prolong the lag phase of amyloid fiber formation from insulin. On the other hand, both the porous nanoparticles are found to decrease the extent of amorphous aggregation (with slight improvement for PNS) of pathogenic huntingtin (Htt) protein in Huntington's disease cell model. This is a noted direct observation in controlling and understanding protein aggregation diseases which may help us to formulate nanotherapeutic drugs for future clinical applications.

Aggregation of intrinsically disordered as well as the ordered proteins under certain premises or physiological conditions leads to pathological disorder.

Bimetallic Ag-Au alloy nanocubes for SERS based sensitive detection of explosive molecules

We have fabricated Ag-Au alloy nanocubes using the galvanic replacement of silver nanocubes by aqueous HAuCl₄ and investigated their morphological, structural, compositional and optical properties. The inter-diffusion between silver and gold at 100 °C leads to the formation of Ag-Au alloy nanocubes with hollow interiors. A broad tuning of the surface plasmon resonance (SPR) wavelength from 624 nm to 920 nm is obtained with the varying volume of HAuCl₄. When excited at wavelength 785 nm, the bimetallic Ag-Au nanocubes with pinholes exhibit two-fold Raman intensity enhancement compared to pristine Ag nanocubes. The surface-enhanced Raman spectroscopy (SERS) substrate prepared with Ag-Au alloy nanocubes shows high-intensity enhancement factor of 1.9 × 10⁷ for 11.2 wt% Au content. The SERS-active Ag-Au alloy nanocubes substrates were exploited for the detection of two explosive molecules; p-nitrobenzoic acid (PNBA) and picric acid (PA). Remarkable detection sensitivity and ultra-low detection limit of 1.7 × 10^-14 M for PNBA and 4.1 × 10^-11 M for PA were obtained, demonstrating the very high SERS detection capabilities of the as-prepared substrate.

Laser Printing of Plasmonic Nanosponges

Three-dimensional porous nanostructures made of noble metals represent novel class of nanomaterials promising for nonlinear nanooptics and sensors. Such nanostructures are typically fabricated using either reproducible yet time-consuming and costly multi-step lithography protocols or less reproducible chemical synthesis that involve liquid processing with toxic compounds. Here, we combined scalable nanosecond-laser ablation with advanced engineering of the chemical composition of thin substrate-supported Au films to produce nanobumps containing multiple nanopores inside. Most of the nanopores hidden beneath the nanobump surface can be further uncapped using gentle etching of the nanobumps by an Ar-ion beam to form functional 3D plasmonic nanosponges. The nanopores 10–150 nm in diameter were found to appear via laser-induced explosive evaporation/boiling and coalescence of the randomly arranged nucleation sites formed by nitrogen-rich areas of the Au films. Density of the nanopores can be controlled by the amount of the nitrogen in the Au films regulated in the process of their magnetron sputtering assisted with nitrogen-containing discharge gas.

Monitoring peptide tyrosine nitration by spectroscopic methods

Oxidative stress can lead to various derivatives of the tyrosine residue in peptides and proteins. A typical product is 3-nitro-L-tyrosine residue (Nit), which can affect protein behavior during neurodegenerative processes, such as those associated with Alzheimer's and Parkinson's diseases. Surface enhanced Raman spectroscopy (SERS) is a technique with potential for detecting peptides and their metabolic products at very low concentrations. To explore the applicability to Nit, we use SERS to monitor tyrosine nitration in Met-Enkephalin, rev-Prion protein, and α-synuclein models. Useful nitration indicators were the intensity ratio of two tyrosine marker bands at 825 and 870 cm^-1 and a bending vibration of the nitro group. During the SERS measurement, a conversion of nitrotyrosine to azobenzene containing peptides was observed. The interpretation of the spectra has been based on density functional theory (DFT) simulations. The CAM-B3LYP and ωB97XD functionals were found to be most suitable for modeling the measured data. The secondary structure of the α-synuclein models was monitored by electronic and vibrational circular dichroism (ECD and VCD) spectroscopies and modeled by molecular dynamics (MD) simulations. The results suggest that the nitration in these peptides has a limited effect on the secondary structure, but may trigger their aggregation.

Liquid Phase Interfacial Surface-Enhanced Raman Scattering Platform for Ratiometric Detection of MicroRNA 155

The self-assembly of gold nanoparticles (Au NPs) on a liquid phase interface is often employed as a surface-enhanced Raman scattering (SERS) platform with advantages of simple preparation, high reproducibility, and a defect-free character, but they are limited to only detect a target with Raman signals. To overcome this problem, microRNA 155 without a Raman signal can be detected by a liquid phase interfacial ratiometric SERS platform. Compared with the typical solid phase SERS platform, we propose a distinctive strategy not only owning the advantages of the liquid phase interfacial platform but also breaking the limitation of recent liquid-liquid interfacial SERS analysis. This platform presents a fabulous sensitivity with a limit of detection (LOD) of 1.10 aM for microRNA 155. By simply altering the duplex-specific nuclease (DSN) enzyme amplification, our strategy can realize detection of a variety of microRNAs, paving the way to practical applications of a liquid phase SERS platform.

Plasmonic Nanozymes: Engineered Gold Nanoparticles Exhibit Tunable Plasmon-Enhanced Peroxidase-Mimicking Activity

Enzyme-mimicking inorganic nanoparticles, also known as nanozymes, have emerged as a rapidly expanding family of artificial enzymes that exhibit superior structural robustness and catalytic durability when serving as the surrogates of natural enzymes for widespread applications. However, the performance optimization of inorganic nanozymes has been pursued in a largely empirical fashion due to lack of generic design principles guiding the rational tuning of the nanozyme activities. Here we choose Au surface-roughened nanoparticles as a model plasmonic nanozyme that combines peroxidase-mimicking behaviors with tunable plasmonic characteristics to demonstrate the feasibility of fine-tuning nanozyme activities through plasmonic excitations using visible and near-infrared light sources. Taking full advantage of the unique plasmonic tunability offered by Au surface-roughened nanoparticles, we were able to unravel the detailed relationship between plasmonic excitations and nanozyme activities that underpins the hot electron-mediated working mechanism of peroxidase-mimicking plasmonic nanozymes.

Highly reusable nanoporous silver sheet for sensitive SERS detection of pesticides

Surface-enhanced Raman spectroscopy (SERS) enables pesticide detection at the point-of-need, but its practical application is limited by expensive and disposable SERS substrates. Here, we report a reusable nanoporous silver (NPAg) sheet for the SERS detection of organochlorine pesticides, aiming to maximize the cost-efficiency of substrate regeneration. The NPAg sheet is prepared by a reduction-induced decomposition method without chemical induced random aggregations. This SERS substrate is sensitive to various analytes regardless of their affinity to a metal surface such as rhodamine B, dichlorodiphenyl-trichloroethane (DDT), and lindane due to its large surface area and the coral rock-like morphology. The SERS signal of lindane, a typical organochlorine pesticide, is identified and quantified with a minimum detectable concentration of 3 × 10^-7 M (87 ppb), which is below the maximum residue limits in various foods set by the regulators across the world. More importantly, after a few minutes of ultrasonic cleaning in water, the NPAg sheet can be reused at least 20 times with a reproducible SERS activity. Furthermore, the NPAg sheet remains stable in terms of its sensitivity and reusability after several months of bare strorage. Therefore, the NPAg sheet as a SERS substrate holds great promise for mass production and convenient applications in low-cost pesticide analysis.

Single-particle study: effects of oxygen plasma treatment on structural and spectral changes of anisotropic gold nanorods

Oxygen plasma treatment is a common method for removing the surfactant capping material from gold nanoparticles, improving their functionalization and lowering their cytotoxicity for biological studies. This single-particle study investigates the effects of oxygen plasma treatment on the structural and localized surface plasmon resonance (LSPR) spectral variations of anisotropic gold nanorods (AuNRs). Single AuNRs subjected to different plasma treatment times were characterized by scanning electron microscopy and dark-field microscopy. The AuNR length was a gradually decreasing function of plasma treatment time. After 120 s of plasma treatment, the aspect ratio of the AuNRs was reduced by a major structural deformation. Furthermore, increasing the plasma treatment time gradually broadened the LSPR linewidth of the single AuNRs. This trend was attributed to the decreased aspect ratio and the increased plasmon damping. These results provide vital and fundamental information on the relationship among plasma treatment time, structural change, and LSPR damping at the single-particle level.

Emission behaviors of colloidal quantum dots linked onto synthesized metal nanoparticles

With two different residual surfactants, four different metal nanoparticles (NPs), including two Au NPs and two Ag NPs are synthesized for linking with red-emitting CdZnSeS/ZnS colloidal quantum dots (QDs) to enhance QD emission efficiency. Those metal NPs are first connected with amino polyethylene glycol thiol of different molecular weights to avoid aggregation and make them positively charged. They can attract negatively charged QDs for inducing surface plasmon (SP) coupling such that either QD absorption or emission and hence overall color conversion efficiency can be enhanced. The enhancement of QD emission efficiency is evaluated through the comparison of time-resolved photoluminescence behaviors under different QD linkage conditions. Such results are confirmed by the measurement of the emission quantum efficiency of QD. It is found that by linking QDs onto Ag NPs, the QD emission efficiency is more enhanced, when compared with Au NPs. Also, depending on the synthesis process, the residual surfactant of citrate leads to a relatively large increment in QD emission efficiency, when compared to the surfactant of cetrimonium chloride. A more enhanced QD emission efficiency is caused by a higher QD linkage capability and a stronger SP coupling effect.

From spherical to bone-shaped gold nanoparticles-Time factor in the formation of Au NPs, their optical and photothermal properties

Using the same synthesis method, which was stopped at different time intervals, gold nanoparticles (Au NPs) with different shapes, from spherical to bone-shaped, were obtained. The physical properties of the synthesized Au NPs were investigated using transmission electron microscopy (TEM) combined with selected area electron diffraction patterns (SAED) and ultraviolet-visible spectroscopy (UV-vis). The TEM images showed, that stopping the synthesis after one minute lead to the formation of small spherical Au NPs, which evolved to the cubic shape, rods and bone-shaped Au NPs after 15 min, 30 min, 2 h, respectively. SAED patterns showed, that all the obtained Au NPs were crystalline. UV-vis spectra revealed, that the light absorbance depends on the shape of the Au NPs. Moreover, the effects of the time factor in the formation of Au NPs on the effective conversion of electromagnetic energy into thermal energy, was studied. Furthermore, simulated photothermal therapy (PTT) in combination with the obtained NPs, was done for two cancer cell lines SW480 and SW620. The mortality of cells after using the differently shaped Au NPs as photosensitizers is between 18 % and 52 % and increases with the decrease of the synthesis time.

Plasmonic nanosponges filled with silicon for enhanced white light emission

Plasmonic nanosponges are a powerful platform for various nanophotonic applications owing to extremely high local field enhancement in metallic nanopores. The filling of the nanopores with high-refractive index semiconductors (e.g. Si, Ge, GaP, etc.) opens up opportunities for the enhancement of nonlinear effects in these materials. However, this task remains challenging due to the lack of knowledge on the integration process of metal and high-index semiconductor components in such nanoobjects. Here, we investigate metal-dielectric nanoparticles fabricated from bilayer Si/Au films by the laser printing technique via a combination of theoretical and experimental methods. We reveal that these hybrid nanoparticles represent the Au sponge-like nanostructure filled with Si nanocrystallites. We also demonstrate that the Au net provides strong near-field enhancement in the Si grains increasing the white light photoluminescence in the hybrid nanostructures compared to uniform Si nanoparticles. These results pave the way for engineering the internal structure of the sponge-like hybrid nanoparticles possessing white light luminescence and control of their optical properties on demand.

Hollow Porous Gold Nanoshells with Controlled Nanojunctions for Highly Tunable Plasmon Resonances and Intense Field Enhancements for Surface-Enhanced Raman Scattering

Plasmonic metal nanostructures with nanogaps have attracted great interest owing to their controllable optical properties and intense electromagnetic fields that can be useful for a variety of applications, but precise and reliable control of nanogaps in three-dimensional nanostructures remains a great challenge. Here, we report the control of nanojunctions of hollow porous gold nanoshell (HPAuNS) structures by a facile oxygen plasma-etching process and the influence of changes in nanocrevices of the interparticle junction on the optical and sensing characteristics of HPAuNSs. We demonstrate a high tunability of the localized surface plasmon resonance (LSPR) peaks and surface-enhanced Raman scattering (SERS) detection of rhodamine 6G (R6G) using HPAuNS structures with different nanojunctions by varying the degree of gold sintering. As the neck region of the nanojunction is further sintered, the main LSPR peak shifts from 785 to 1350 nm with broadening because the charge transfer plasmon mode becomes more dominant than the dipolar plasmon mode, resulting from the increase of conductance at the interparticle junctions. In addition, it is demonstrated that an increase in the sharpness of the nanojunction neck can enhance the SERS enhancement factor of the HPAuNS by up to 4.8-fold. This enhancement can be ascribed to the more intense local electromagnetic fields at the sharper nanocrevices of interparticle junctions. The delicate change of nanojunction structures in HPAuNSs can significantly affect their optical spectrum and electromagnetic field intensity, which are critical for their practical use in a SERS-based analytical sensor as well as multiple-wavelength compatible applications.

Solvent assisted size effect on AuNPs and significant inhibition on K562 cells

Herein, the synthesis and characterization of ideal size (∼10 and 40 nm, in diameter) AuNPs (gold nanoparticles) were reported. Two different organic solvents such as DMF (dimethyl formamide) and NMPL (N-methyl-2-pyrrolidone) were used to synthesize AuNPs along with agents reducing agents such as NaBH4 (sodium borohydrate) and Na3C6H5O7 (sodium citrate). The combination of [(HAuCl4)-(DMF)-(NaBH4)] gives AuNPs with an avg. size of 10.2 nm. Similarly, the combination of [(HAuCl4)-(NMPL)-(Na3C6H5O7)] gives AuNPs with an avg. size of 40.4 nm. The morphology of these nanoscale AuNPs has been characterized through TEM and HRTEM imaging followed by SAED for lattice parameters such as d-spacing value (2.6 Å/0.26 nm) of crystalline metal (Au) nanoparticles. Further, these unique and ideal nanoscale AuNPs were used to evaluate the potential working efficacy by using in vitro cell based studies on K562 (leukaemia) blood cancer cells. From the MTT assay results around 88% cell inhibition was measured for ∼10 nm sized AuNPs. The treated cells were stained with different fluorescent dyes such as FITC, DAPI, Rho-6G and their ruptured morphology has been reported in the respective sections. These types of ideal sized metal (Au) nanoparticles are recommended for various theranostics such as to cure breast, colon, lung and liver cancers.

Controlled Overgrowth of Five-Fold Concave Nanoparticles into Plasmonic Nanostars and Their Single-Particle Scattering Properties

Growth of anisotropic nanostructures enables the manipulation of optical properties across the electromagnetic spectrum by fine morphological tuning of the nanoparticles. Among them, stellated metallic nanostructures present enhanced properties owing to their complex shape, and hence, the control over the final morphology becomes of great importance. Herein, a seed-mediated method for the high-yield production of gold_rich-copper concave branched nanostructures and their structural and optical characterization is reported. The synthesis protocol enabled excellent control and tunability of the final morphology, from concave pentagonal nanoparticles to five-fold branched nanoparticles, named "nanostars". The anisotropic shape was achieved via kinetic control over the synthesis conditions by selective passivation of facets using a capping agent and assisted by the presence of copper chloride ions, both having a crucial impact over the final structure. Optical extinction measurements of nanostars in solution indicated a broad spectral response, hiding the properties of the individual nanostars. Hence, single-particle scattering measurements of individual concave pentagonal nanoparticles and concave nanostars were performed to determine the origin of the multiple plasmon bands by correlation with their morphological features, following their growth evolution. Finite-difference time-domain calculations delivered insights into the geometry-dependent plasmonic properties of concave nanostars and their packed aggregates. Our results uncover the intrinsic scattering properties of individual nanostars and the origin of the broad spectral response, which is mostly due to z-direction packed aggregates.

Core-shell Au@Ag nanodendrites supported on TiO2 nanowires for blue laser beam-excited SERS-based pH sensing

The blue laser beam-excited surface-enhanced Raman scattering (SERS)-based pH sensing holds great promise for avoiding undesired thermal heating effect on some special temperature-vulnerable molecules, as compared to the vast majority studies by exciting in the red or near-infrared (NIR). Herein, we report an ingenious approach to support core-shell Au@Ag nanodendrites (NDs) on TiO₂ nanowires, which can possess enhanced SERS activity under 473 nm laser excitation, owing to the improved charge-transfer effect on modified TiO₂ support by inserting plasmonic Au@Ag. By using pH-indicating 4-mercaptobenzoic acid (4-MBA), the obtained TiO₂/Au@Ag NDs can not only exhibit high sensitive linear-responses of pH changes ranging from pH 4.0 to 9.0 in different solutions (deionized water, NaCl, CaCl₂, and MgCl₂) but also provide excellent temperature stability under 4°C, 25°C and 37°C temperatures as well as good time stability after storage for 10 days. The established SERS-pH sensing by using shorter wavelength laser excitation is highly desirable for understanding physiological process in temperature-vulnerable microenvironment.

Silver Nanoparticles with Liquid Crystalline Ligands Based on Lactic Acid Derivatives

We have prepared and studied silver nanoparticles functionalized with ligands based on lactic acid derivatives. Several types of hybrid systems that differed in the size of silver nanoparticles as well as the length of surface ligands were analyzed. Transmission electron microscopy (TEM) observation provided information about the size and shape of nanoparticles and proved good homogeneity of studied systems. By dynamic light scattering (DLS) measurements, we have measured the size distribution of nanoparticle systems. Plasmonic resonance was detected at around 450 nm. For two hybrid systems, the mesomorphic behaviour has been demonstrated by x-ray measurements. The observed thermotropic liquid crystalline phases reveal lamellar character. We have proposed a model based on self-assembly of intercalated liquid crystalline ligands.

Nanoscale nonreciprocity via photon-spin-polarized stimulated Raman scattering

Time reversal symmetry stands as a fundamental restriction on the vast majority of optical systems and devices. The reciprocal nature of Maxwell’s equations in linear, time-invariant media adds complexity and scale to photonic diodes, isolators, circulators and also sets fundamental efficiency limits on optical energy conversion. Though many theoretical proposals and low frequency demonstrations of nonreciprocity exist, Faraday rotation remains the only known nonreciprocal mechanism that persists down to the atomic scale. Here, we present photon-spin-polarized stimulated Raman scattering as a new nonreciprocal optical phenomenon which has, in principle, no lower size limit. Exploiting this process, we numerically demonstrate nanoscale nonreciprocal transmission of free-space beams at near-infrared frequencies with a 250 nm thick silicon metasurface as well as a fully-subwavelength plasmonic gap nanoantenna. In revealing all-optical spin-splitting, our results provide a foundation for compact nonreciprocal communication and computing technologies, from nanoscale optical isolators and full-duplex nanoantennas to topologically-protected networks.

Here, the authors introduce and study theoretically and numerically a scheme for breaking time-reversal symmetry and achieving nonreciprocity on the nanoscale, using spin-selective stimulated Raman scattering. These results could pave the way for compact nonreciprocal communication and computing technologies.

Aqueous synthesis of highly monodisperse sub-100 nm AgCl nanospheres/cubes and their plasmonic nanomesh replicas as visible-light photocatalysts and single SERS probes

Despite the distinctive electrochemical and photocatalytic properties of nanostructured silver chloride (AgCl), the shape- and size-dependence of their properties have not been thoroughly investigated to date. The most substantial reason responsible for this incomplete study and the subsequent limited applications is the failure in controlling the structure of AgCl nanomaterials, mainly owing to the challenging synthetic conditions including organic phase and high reaction temperature. In this work, we reported a rapid one-pot room-temperature aqueous synthesis of highly monodisperse sub-100 nm AgCl nanomaterials with various shapes and sizes by controlling the precursor (Ag⁺ and AuCl₄ ^-) ratios. The remaining unreacted metal precursors (Ag⁺ and AuCl₄ ^-) used to produce AgClNC were subsequently reduced by ascorbic acid on the surface of the synthesized AgCl nanomaterials to form Ag/Au bimetallic nanomesh structures (AgClNC#AuAgCMs and SMs). After the removal of the AgCl nanotemplates, only nanomesh structures (AuAgCMs and SMs) were obtained. Importantly, we successfully decreased the size of the AgCl nanomaterials which were replicated into bimetallic spherical and cubic nanomesh structures that were small enough (∼100 nm) to show intense surface-plasmon-absorption bands. Based on these unique chemical and physical properties, we could take advantage of the plasmonic photocatalysis properties of the complex comprising semiconducting AgCl/metallic nanomesh replica for the complete removal of the environmentally harmful Cr⁶⁺ in the presence of sacrificial agents such as formic acid. Finally, the novel bimetallic nanomesh structures proved themselves to exhibit intense surface-enhanced Raman scattering properties in a single-particle enhancing the electromagnetic field.

A porous Au-Ag hybrid nanoparticle array with broadband absorption and high-density hotspots for stable SERS analysis

Constructing high-density hotspots is of crucial importance in surface enhanced Raman scattering (SERS). In this paper, we present a large-area and broadband porous Au-Ag hybrid nanoparticle array which was fabricated by an ultra-thin alumina mask (UTAM) technique incorporated with annealing and galvanic replacement techniques. Experimental results and numerical simulations demonstrated that the porous Au-Ag hybrid nanoparticle array possessed enormous hotspots for high sensitivity, uniformity, and stability in SERS analysis. A large Raman enhancement factor of 2.2 × 107 was achieved with a relative standard deviation (RSD) of 7.7%, leading to excellent reliability for Raman detection. Furthermore, this novel substrate exhibited a long shelf time in an ambient environment and promising practical applications in many SERS-based quantitative analytical and biomedical sensing techniques.

Detection of the conformational changes of Discosoma red fluorescent proteins adhered on silver nanoparticles-based nanocomposites via surface-enhanced Raman scattering

Description of the relationship between protein structure and function remains a primary focus in molecular biology, biochemistry, protein engineering and bioelectronics. Moreover, the investigation of the protein conformational changes after adhesion and dehydration is of importance to tackle problems related to the interaction of proteins with solid surfaces. In this paper the conformational changes of wild-type Discosoma recombinant red fluorescent proteins (DsRed) adhered on silver nanoparticles (AgNPs)-based nanocomposites are explored via surface-enhanced Raman scattering (SERS). Originality in the present approach is to work on dehydrated DsRed thin protein layers in link with natural conditions during drying. To enable the SERS effect, plasmonic substrates consisting of a single layer of AgNPs encapsulated by an ultra-thin silica cover layer were elaborated by plasma process. The achieved enhancement of the electromagnetic field in the vicinity of the AgNPs is as high as 105. This very strong enhancement factor allowed detecting Raman signals from discontinuous layers of DsRed issued from solution with protein concentration of only 80 nM. Three different conformations of the DsRed proteins after adhesion and dehydration on the plasmonic substrates were identified. It was found that the DsRed chromophore structure of the adsorbed proteins undergoes optically assisted chemical transformations when interacting with the optical beam, which leads to reversible transitions between the three different conformations. The proposed time-evolution scenario endorses the dynamical character of the relationship between protein structure and function. It also confirms that the conformational changes of proteins with strong internal coherence, like DsRed proteins, are reversible.

Hot carriers in action: multimodal photocatalysis on Au@SnO2 core-shell nanoparticles

Metal-semiconductor hybrid heteronanostructures exhibit intriguing multimodal photocatalytic behaviors dictated by multiple types of photoexcited charge carriers with distinct energy distribution profiles, excited-state lifetimes, and interfacial transfer dynamics. Here we take full advantage of the optical tunability offered by Au@SnO2 core-shell nanoparticles to systematically tune the frequencies of plasmonic electron oscillations in the visible and near-infrared over a broad spectral range well-below the energy thresholds for the interband transitions of Au and the excitonic excitations of SnO2. Employing Au@SnO2 core-shell nanoparticles as an optically tunable photocatalyst, we have been able to create energetic hot carriers exploitable for photocatalysis by selectively exciting the plasmonic intraband transitions and the d → sp interband transitions in the Au cores at energies below the band gap of the SnO2 shells. Using photocatalytic mineralization of organic dye molecules as model reactions, we show that the interband and plasmonic intraband hot carriers exhibit drastically distinct photocatalytic behaviors in terms of charge transfer pathways, excitation power dependence, and apparent photonic efficiencies. The insights gained from this work form an important knowledge foundation guiding the rational optimization of hot carrier-driven chemical transformations on nanostructured metal-semiconductor hybrid photocatalysts.

Biomimetic synthesis of Ag-coated glasswing butterfly arrays as ultra-sensitive SERS substrates for efficient trace detection of pesticides

In this work, we report a biomimetic synthesis route of 3D Ag nanofilm/glasswing butterfly wing hybrids (Ag-G.b.) by magnetron sputtering technology. The 3D surface-enhanced Raman scattering (SERS) substrate is fabricated from an original chitin-based nanostructure, which serves as a bio-scaffold for Ag nanofilms to be coated on. The novel crisscrossing plate-like nanostructures of 3D Ag-G.b. nanohybrids with thick Ag nanofilms provide a substantial contribution to SERS enhancement. Measuring the SERS performance with crystal violet (CV), the Ag-G.b. nanohybrids with the sputtering time of 20 min (Ag-G.b.-20) shows the highest enhancement performance with an enhancement factor (EF) of up to 2.96 × 10⁷. The limit of detection (LOD) for CV was as low as 10^-11 M, demonstrating the ultrahigh sensitivity of the Ag-G.b.-20 substrate. In addition, the Ag-G.b.-20 substrate has an outstanding reproducibility across the entire area with the maximum value of relative standard deviation (RSD) of less than 10.78%. The nanohybrids also exhibit a long-term stability regarding Raman enhancement, as suggested by a duration stability test over a period of 60 days. Importantly, the high-performance Ag-G.b.-20 substrate is further applied as an ultra-sensitive SERS platform for the trace detection of acephate, showing its great potential application in biochemical sensing and food security.

Control of pore structure in a porous gold nanoparticle for effective cancer cell damage

For tumor treatment, compared with gold nanoparticles (NPs) of other geometries, a porous gold NP (PGNP) has the advantages of stronger localized surface plasmon resonance (LSPR) due to the pore nanostructures and a larger surface area to link with more drug or photosensitizer (PS) molecules for more effective delivery into cancer cells. Different from the chemical synthesis methods, in this paper we demonstrate the fabrication procedures of PGNP based on shaped Au/Ag deposition on a Si substrate and elucidate the advantageous features. PGNPs fabricated under different conditions, including different deposited Au/Ag content ratios and different alloying annealing temperatures, are compared for optimizing the fabrication condition in terms of LSPR wavelength, PS linkage capability, and cancer cell damage efficiency. It is found that within the feasible fabrication parameter ranges, the Au/Ag content ratio of 3:7 and alloying annealing temperature at 600 °C are the optimized conditions. In comparing with widely used gold NPs of other geometries, PGNP fabricated under the optimized conditions can be used for achieving a significantly higher linked PS molecule number per unit gold weight.

Plasmonic nanomaterial structuring for SERS enhancement

Au island over nanospheres (AuIoN) structures featuring a three-dimensional (3D) nanostructure on a two-dimensional (2D) array of nanospheres with different adhesion layers were fabricated as surface-enhanced Raman scattering (SERS) substrates.

Probing the SERS brightness of individual Au nanoparticles, hollow Au/Ag nanoshells, Au nanostars and Au core/Au satellite particles: single-particle experiments and computer simulations

Different classes of plasmonic nanoparticles functionalized with the non-resonant Raman reporter molecule 4-MBA are tested for their SERS signal brightness at the single-particle level: gold nanoparticles, hollow gold/silver nanoshells, gold nanostars, and gold core/gold satellite particles. Correlative SERS/SEM experiments on a set of particles from each class enable the unambiguous identification of single particles by electron microscopy as well as the characterization of both their elastic (LSPR) and inelastic (SERS) scattering spectra. Experimental observations are compared with predictions from FEM computer simulations based on 3D models derived from representative TEM/SEM images. Single gold nanostars and single gold core/gold satellite particles exhibit a detectable SERS signal under the given experimental conditions, while single gold nanoparticles and single hollow gold/silver nanoshells are not detectable.