Thermodiffusion of charged colloids: single-particle diffusion

Colloid thermophoresis in surfactant solutions: Probing colloid-solvent interactions through microscale experiments

Thermophoresis has emerged as a powerful tool for characterizing and manipulating colloids at the nano- and micro-scales due to its sensitivity to colloid-solvent interactions. The use of surfactants enables the tailoring of surface chemistry on colloidal particles and the tuning of interfacial interactions. However, the microscopic mechanisms underlying thermophoresis in surfactant solutions remain poorly understood due to the complexity of multiscale interaction coupling. To achieve a more fundamental understanding of the roles of surfactants, we investigated the thermophoretic behavior of silica beads in both ionic and nonionic surfactant solutions at various background temperatures. We provide a complete mechanistic picture of the effects of surfactants on interfacial interactions through mode-coupling analysis of both electrophoretic and thermophoretic experiments. Our results demonstrate that silica thermophoresis is predominantly governed by the dissociation of silanol functional groups at silica-water interfaces in nonionic surfactant solutions, while in ionic surfactant solutions, the primary mechanism driving silica thermophoresis is the adsorption of ionic surfactants onto the silica surface.

Heat flows enrich prebiotic building blocks and enhance their reactivity

The emergence of biopolymer building blocks is a crucial step during the origins of life1-6. However, all known formation pathways rely on rare pure feedstocks and demand successive purification and mixing steps to suppress unwanted side reactions and enable high product yields. Here we show that heat flows through thin, crack-like geo-compartments could have provided a widely available yet selective mechanism that separates more than 50 prebiotically relevant building blocks from complex mixtures of amino acids, nucleobases, nucleotides, polyphosphates and 2-aminoazoles. Using measured thermophoretic properties7,8, we numerically model and experimentally prove the advantageous effect of geological networks of interconnected cracks9,10 that purify the previously mixed compounds, boosting their concentration ratios by up to three orders of magnitude. The importance for prebiotic chemistry is shown by the dimerization of glycine11,12, in which the selective purification of trimetaphosphate (TMP)13,14 increased reaction yields by five orders of magnitude. The observed effect is robust under various crack sizes, pH values, solvents and temperatures. Our results demonstrate how geologically driven non-equilibria could have explored highly parallelized reaction conditions to foster prebiotic chemistry.

A Mode-Coupling Model of Colloid Thermophoresis in Aqueous Systems: Temperature and Size Dependencies of the Soret Coefficient

Thermophoresis allows for the manipulation of colloids in systems containing a temperature gradient. A deep understanding of the phenomena at the molecular level allows for increased control and manipulation strategies. We developed a microscopic model revealing different coupling mechanisms for colloid thermophoresis under local thermodynamic equilibrium conditions. The model has been verified through comparison with a variety of previously published experimental data and shows good agreement across significantly different systems. We found five different temperature-dependent contributions to the Soret coefficient, two from bulk properties and three from interfacial interactions between the fluid medium and the colloid. Our analysis shows that the Soret coefficient for nanosized particles is governed by the competition between the electrostatic and hydration interfacial interactions, while bulk contributions become more pronounced for protein systems. This theory can be used as a guide to design thermophoretic transport, which is relevant for sensing, focusing, and separation at the microscale.

Evidence of Size Stratification in Colloidal Glass Microgranules Realized by Rapid Evaporative Assembly

Evaporation is a ubiquitous phenomenon. Rapid evaporation of the continuous phase from micrometric colloidal droplets can be used to realize nanostructured microgranules, constituting the assembled nanoparticles. One of the important aspects of such nonequilibrium assembly is the nature of the packing of nanoparticles in the microgranules. The present work demonstrates the evidence of size stratification of the nanoparticles in such far-from-equilibrium configurations. Small-angle X-ray scattering, in combination with particle packing simulation, reveals the "large on top"-type stratification in such assembled microgranules, where the larger particles get concentrated at the outer shell of the granules while the smaller particles reside in the core region. It also reveals the presence of local clusters in such a rapid evaporative assembly in aerosolized colloidal droplets.

Hypothermal opto-thermophoretic tweezers

Optical tweezers have profound importance across fields ranging from manufacturing to biotechnology. However, the requirement of refractive index contrast and high laser power results in potential photon and thermal damage to the trapped objects, such as nanoparticles and biological cells. Optothermal tweezers have been developed to trap particles and biological cells via opto-thermophoresis with much lower laser powers. However, the intense laser heating and stringent requirement of the solution environment prevent their use for general biological applications. Here, we propose hypothermal opto-thermophoretic tweezers (HOTTs) to achieve low-power trapping of diverse colloids and biological cells in their native fluids. HOTTs exploit an environmental cooling strategy to simultaneously enhance the thermophoretic trapping force at sub-ambient temperatures and suppress the thermal damage to target objects. We further apply HOTTs to demonstrate the three-dimensional manipulation of functional plasmonic vesicles for controlled cargo delivery. With their noninvasiveness and versatile capabilities, HOTTs present a promising tool for fundamental studies and practical applications in materials science and biotechnology.

Plasmonic Nanostructure Engineering with Shadow Growth

Physical shadow growth is a vacuum deposition technique that permits a wide variety of 3D-shaped nanoparticles and structures to be fabricated from a large library of materials. Recent advances in the control of the shadow effect at the nanoscale expand the scope of nanomaterials from spherical nanoparticles to complex 3D shaped hybrid nanoparticles and structures. In particular, plasmonically active nanomaterials can be engineered in their shape and material composition so that they exhibit unique physical and chemical properties. Here, the recent progress in the development of shadow growth techniques to realize hybrid plasmonic nanomaterials is discussed. The review describes how fabrication permits the material response to be engineered and highlights novel functions. Potential fields of application with a focus on photonic devices, biomedical, and chiral spectroscopic applications are discussed.

Colloid thermophoresis in the dilute electrolyte concentration regime: from theory to experiment

Colloid thermophoresis in aqueous media is vital for numerous applications in nanoscience and life sciences. To date, a general description of colloid thermophoresis in DI water has not been determined. Here, we describe a theoretical model within the framework of the Fokker-Planck formalism and the flickering cluster concept to describe the hydration entropy effect on the thermophoretic behaviour of colloids suspended in DI water and compare this to new experimental results. We built an experimental platform to allow for rapid and robust temperature control and investigate the thermophoretic behaviour of silica microspheres with different sizes at various background temperatures for comparison. In this work, the ionic shielding effect is accounted for by using the well-known Duhr-Dhont's model, and the hydration layer effect is determined using the developed theoretical model. For the latter, our model reveals that the sign of the Soret coefficient is governed by the interplay between the binding energy and the chemical potential of water molecules, which were found to be in the same order of magnitude. We show that our analysis accurately describes the experimental behaviour of colloidal particles that opens a new avenue for developing versatile trapping and separation techniques for various colloidal particles in aqueous systems according to their size and background temperature.

Surface hydrophilicity-mediated migration of nano/microparticles under temperature gradient in a confined space

HYPOTHESIS

Particle transport by a temperature gradient is prospective in many biomedical applications. However, the prevalence of boundary confinement in practical use introduces synergistic effects of thermophoresis and thermo-osmosis, causing controversial phenomena and great difficulty in understanding the mechanisms.

EXPERIMENTS

We developed a microfluidic chip with a uniform temperature gradient and switchable substrate hydrophilicity to measure the migrations of various particles (d = 200 nm - 2 μm), through which the effects of particle thermophoresis and thermo-osmotic flow from the substrate surface were decoupled. The contribution of substrate hydrophilicity on thermo-osmosis was examined. Thermophoresis was measured to clarify its dependence on particle size and hydrophilicity.

FINDINGS

This paper reports the first experimental evidence of a large enthalpy-dependent thermo-osmotic mobility χ ∼ ΔH on a hydrophobic polymer surface, which is 1-2 orders of magnitude larger than that on hydrophilic surfaces. The normalized Soret coefficient for polystyrene particles, S_T/d = 18.0 K^-1µm^-1, is confirmed to be constant, which helps clarify the controversy of the size dependence. Besides, the Soret coefficient of hydrophobic proteins is approximately-four times larger than that of hydrophilic extracellular vesicles. These findings suggest that the intrinsic slip on the hydrophobic surface could enhance both surface thermo-osmosis and particle thermophoresis.

Thermophoresis beyond Local Thermodynamic Equilibrium

We measure the thermophoresis of polysterene beads over a wide range of temperature gradients and find a pronounced nonlinear phoretic characteristic. The transition to the nonlinear behavior is marked by a drastic slowing down of thermophoretic motion and is characterized by a Péclet number of order unity as corroborated for different particle sizes and salt concentrations. The data follow a single master curve covering the entire nonlinear regime for all system parameters upon proper rescaling of the temperature gradients with the Péclet number. For low thermal gradients, the thermal drift velocity follows a theoretical linear model relying on the local-equilibrium assumption, while linear theoretical approaches based on hydrodynamic stresses, ignoring fluctuations, predict significantly slower thermophoretic motion for steeper thermal gradients. Our findings suggest that thermophoresis is fluctuation dominated for small gradients and crosses over to a drift-dominated regime for larger Péclet numbers in striking contrast to electrophoresis.

Thermophoretic motion of a charged single colloidal particle

We calculate the thermophoretic drift of a charged single colloidal particle with hydrodynamically slipping surface immersed in an electrolyte solution in response to a small temperature gradient. Here we rely on a linearized hydrodynamic approach for the fluid flow and the motion of the electrolyte ions while keeping the full nonlinearity of the Poisson-Boltzmann equation of the unperturbed system to account for possible large surface charging. The partial differential equations are transformed into a coupled set of ordinary differential equations in linear response. Numerical solutions are elaborated for parameter regimes of small and large Debye shielding and different hydrodynamic boundary conditions encoded in a varying slip length. Our results are in good agreement with predictions from recent theoretical work and successfully describe experimental observations on thermophoresis of DNA. We also compare our numerical results with experimental data on polystyrene beads.

Pathogen effector AvrSr35 triggers Sr35 resistosome assembly via a direct recognition mechanism

Nucleotide-binding, leucine-rich repeat receptors (NLRs) perceive pathogen effectors to trigger plant immunity. The direct recognition mechanism of pathogen effectors by coiled-coil NLRs (CNLs) remains unclear. We demonstrate that the Triticum monococcum CNL Sr35 directly recognizes the pathogen effector AvrSr35 from Puccinia graminis f. sp. tritici and report a cryo-electron microscopy structure of Sr35 resistosome and a crystal structure of AvrSr35. We show that AvrSr35 forms homodimers that are disassociated into monomers upon direct recognition by the leucine-rich repeat domain of Sr35, which induces Sr35 resistosome assembly and the subsequent immune response. The first 20 amino-terminal residues of Sr35 are indispensable for immune signaling but not for plasma membrane association. Our findings reveal the direct recognition and activation mechanism of a plant CNL and provide insights into biochemical function of Sr35 resistosome.

Effect of an excess of surfactant on thermophoresis, mass diffusion and viscosity in an oily surfactant-stabilized ferrofluid

The effect of an excess of surfactant on the thermophoresis of a sterically stabilized ferrofluid is investigated experimentally by forced Rayleigh scattering (FRS). The experiments are performed with a stable magnetic fluid sample to which controlled amounts of surfactant are added. A decrease in the thermally induced transport of magnetic nanoparticles is observed while increasing the temperature T. The positive Soret coefficient [Formula: see text] decreases by adding 2 vol% of surfactant at room temperature. As shown by FRS relaxation, this decreasing is mainly associated with a reduction of the interaction between the carrier fluid and individual nanoparticles. No significant effect of extra surfactant on the sign of [Formula: see text] is observed at higher T's (up to [Formula: see text]C). Dynamic light scattering at room temperature reveals the presence of a small amount of clusters/aggregates in the samples, which are hardly detectable by FRS relaxation. The presence of these small clusters/aggregates is confirmed by a rheological probing of the fluid properties. Whatever T, a small amount of added surfactant first causes a decrease of the ferrofluid viscosity, associated with a 10% decreasing of the flow activation energy. Further on, viscosity and activation energy both recover at higher excess surfactant concentrations. These results are analyzed in terms of saturation of the surfactant layer, concentration of free surfactant chains and heat of transport of the nanoparticles.

Optically-assisted thermophoretic reversible assembly of colloidal particles and E. coli using graphene oxide microstructures

Optically-assisted large-scale assembly of nanoparticles have been of recent interest owing to their potential in applications to assemble and manipulate colloidal particles and biological entities. In the recent years, plasmonic heating has been the most popular mechanism to achieve temperature hotspots needed for extended assembly and aggregation. In this work, we present an alternative route to achieving strong thermal gradients that can lead to non-equilibrium transport and assembly of matter. We utilize the excellent photothermal properties of graphene oxide to form a large-scale assembly of silica beads. The formation of the assembly using this scheme is rapid and reversible. Our experiments show that it is possible to aggregate silica beads (average size 385 nm) by illuminating thin graphene oxide microplatelet by a 785 nm laser at low intensities of the order of 50-100 µW/µm2. We further extend the study to trapping and photoablation of E. coli bacteria using graphene oxide. We attribute this aggregation process to optically driven thermophoretic forces. This scheme of large-scale assembly is promising for the study of assembly of matter under non-equilibrium processes, rapid concentration tool for spectroscopic studies such as surface-enhanced Raman scattering and for biological applications.

Can the Thermophoretic Mobility of Uncharged Colloids Be Predicted?

The thermophoretic motion of nonionic colloids in an inhomogeneous temperature field is due to the solvent-colloid dispersion interactions. The latter form an attractive near-particle "gravity" field that leads to sinking of the colder solvent layers toward a colloid. The spatial extension of this microconvective motion is comparable to the size of the colloids, which prove to be small enough to observe their own regular thermophoretic drift to the cold. The Boussinesq equations of convection are augmented by the boundary conditions at the characteristic molecular distance dividing the immovable and motile solvent layers. For organic liquids, this distance proves to be a property of pure solvent. The thermophoretic mobilities are found for colloids with and without surfacted layers. They are determined by the bulk properties of substances and the Hamaker constant of the solvent-solute interactions. The mobilities weakly (logarithmically) depend on the size of colloids and tend to a universal value in the limiting case of strongly asymmetrical mixtures. This is the first report that shows a prediction of the thermophoretic velocities of uncharged colloids. The relation between the thermophoretic mobility of colloids and the Hamaker constant of the solute-solvent interactions enables an experimental determination of the latter quantity from thermophoresis data.

Nonequilibrium thermodynamic material transport equations for thermodiffusion of isotopes and isomers in multicomponent systems

The Soret coefficients for n-heptane and 2-methylhexane in binary and ternary solutions with benzene at different volume fractions of isomers Φ.

Internal Degrees of Freedom as a Basis for Isotopic Effects in Thermodiffusion

We present a model that relates isotope effects in thermodiffusion to changes in internal degrees of freedom associated with rotational and vibrational motion. The model uses general material transport equations for binary non-isothermal liquid systems, derived using non-equilibrium thermodynamics in our previous work. The equilibrium chemical potentials of the components at constant pressure are derived using statistical mechanics. In evaluating the model, we use experimental data on changes in the Soret coefficient of various hydrocarbons in perprotonated and perdeuterated cyclohexane. We also compare predictions of the model with experimental data on the Soret coefficient in isotopic mixtures. In all cases, the model is consistent with experimental data and computations.

Brownian Particle Thermal Drift Caused by Hydrodynamic Fluctuations

We have studied the thermophoretic drift of a Brownian particle within the framework of the theory of fluctuating hydrodynamics of Landau and Lifshitz. The stochastic motion of a dispersed particle results from the fluctuating part of the stress tensor of the liquid. In the presence of a temperature gradient, the mean volume force acting on the liquid assumes a finite value due to non-vanishing quadratic terms in the fluctuations, which originate from the temperature dependence of the viscosity. An analytical expression is derived for the drift velocity and compared to experimental results.

Liquid Optothermoelectrics: Fundamentals and Applications

Liquid thermoelectricity describes the redistribution of ions in an electrolytic solution under the influence of temperature gradients, which leads to the formation of electric fields. The thermoelectric field is effective in driving the thermophoretic migration of charged colloidal particles for versatile manipulation. However, traditional macroscopic thermoelectric fields are not suitable for particle manipulations at high spatial resolution. Inspired by optical tweezers and relevant optical manipulation techniques, we employ laser interaction with light-absorbing nanostructures to achieve subtle heat management on the micro- and nanoscales. The resulting thermoelectric fields are exploited to develop new optical technologies, leading to a research field known as liquid optothermoelectrics. This Invited Feature Article highlights our recent works on advancing fundamentals, technologies, and applications of optothermoelectrics in colloidal solutions. The effects of light irradiation, substrates, electrolytes, and particles on the optothermoelectric manipulations of colloidal particles along with their theoretical limitations are discussed in detail. Our optothermoelectric technologies with the versatile capabilities of trapping, manipulating, and pulling colloidal particles at low optical power are finding applications in microswimmers and nanoscience. With its intricate interfacial processes and tremendous technological promise, optothermoelectrics in colloidal solutions will remain relevant for the foreseeable future.

An Unreasonable Universality of the Thermophoretic Velocity

Thermophoresis is the migration of dispersed molecules or particles in an inhomogeneous temperature field. It has been associated with various nonequilibrium phenomena ranging from stratified oil reservoirs to prebiotic evolution and the origin of life. The thermophoretic velocity is difficult to predict and appears almost random. We show that, in the case of strongly asymmetric mixtures with high molecular mass ratios of the solute to the solvent, it unexpectedly assumes a universal value once the trivial influence of the viscosity has been factored out. This asymptotic behavior is surprisingly universal and a general property of many highly asymmetric molecular mixtures ranging from organic molecules in n-alkanes to dilute solutions of high polymers. A quantitative explanation is provided on the basis of the asymmetric limit of the pseudoisotopic Soret effect.

Self-assembly of charged colloidal cubes

In this work, we show how and why the interactions between charged cubic colloids range from radially isotropic to strongly directionally anisotropic, depending on tuneable factors. Using molecular dynamics simulations, we illustrate the effects of typical solvents to complement experimental investigations of cube assembly. We find that in low-salinity water solutions, where cube self-assembly is observed, the colloidal shape anisotropy leads to the strongest attraction along the corner-to-corner line, followed by edge-to-edge, with a face-to-face configuration of the cubes only becoming energetically favorable after the colloids have collapsed into the van der Waals attraction minimum. Analysing the potential of mean force between colloids with varied cubicity, we identify the origin of the asymmetric microstructures seen in experiment.

Quantifying the Interaction of Phosphite with ABC Transporters: MicroScale Thermophoresis and a Novel His-Tag Labeling Approach

The combination of MicroScale Thermophoresis (MST) and near-native site-specific His-tag labeling enables simple, robust, and reliable determination of the binding affinity between proteins and ligands. To demonstrate its applicability for periplasmic proteins, we provide a detailed protocol for determination of the binding affinity of phosphite to three ABC transporter periplasmic-binding proteins from environmental microorganisms. ABC transporters are central to many important biomedical phenomena, including resistance of cancers and pathogenic microbes to drugs. The protocol described here can be used to quantify protein-ligand and protein-protein interactions for other soluble, membrane-associated and integral membrane proteins.

Thermophoresis of biological and biocompatible compounds in aqueous solution

With rising popularity of microscale thermophoresis for the characterisation of protein-ligand binding reactions and possible applications in microfluidic devices, there is a growing interest in considering thermodiffusion in the context of life sciences. But although the understanding of thermodiffusion in non-polar mixtures has grown rapidly in recent years, predictions for associated mixtures like aqueous solutions remain challenging. This review aims to give an overview of the literature on thermodiffusion in aqueous systems, show the difficulties in theoretical description that arise from the non-ideal behaviour of water-mixtures, and highlight the relevance of thermodiffusion in a biological context. We find that the thermodiffusion in aqueous systems is dominated by contributions from heat of transfer, hydrogen bond interactions and charge effects. However, the separation of these effects is often difficult, especially in case of biological systems where a systematic exclusion of contributions may not be feasible.

Thermoosomosis in microfluidic devices containing a temperature gradient normal to the channel walls

We analyze a microfluidic pump from the literature that utilizes a flat channel with boundary walls at different temperatures and tilted elongated pillars within in order to construct an adequate theory for designing devices in which the temperature gradient between channel walls is transformed into a longitudinal temperature gradient along the channel length. The action of the device is based on thermoosmosis in the secondary longitudinal temperature gradient associated with the specific geometry of the device, which can be described using physicochemical hydrodynamics without invoking the concept of thermophoretic force. We also describe a rotating drive device based on the same principle and design.

Self-thermoelectrophoresis at low salinity

A locally heated Janus colloid can achieve motion in an electrolyte by an effect known as self-thermo(di)electrophoresis. We numerically study the self-propulsion of such a "hot swimmer" in a monovalent electrolyte using the finite-element method and analytic theory. The effect of electrostatic screening for intermediate and large Debye lengths is charted and we report on the fluid flow generated by self-thermoelectrophoresis. We obtain excellent agreement between our analytic theory and numerical calculations in the limit of high salinity, validating our approach. At low salt concentrations, we employ Teubner's integral formalism to arrive at expressions for the speed, which agree semi-quantitatively with our numerical results for conducting swimmers. This lends credibility to the remarkably high swim speed at very low ionic strength, which we numerically obtain for a fully insulating swimmer. We also report on hot swimmers with a mixed electrostatic boundary conditions. Our results should benefit the realization and analysis of further experiments on thermo(di)electrophoretic swimmers.

Clustering of Janus particles in an optical potential driven by hydrodynamic fluxes

Self-organisation is driven by the interactions between the individual components of a system mediated by the environment, and is one of the most important strategies used by many biological systems to develop complex and functional structures. Furthermore, biologically-inspired self-organisation offers opportunities to develop the next generation of materials and devices for electronics, photonics and nanotechnology. In this work, we demonstrate experimentally that a system of Janus particles (silica microspheres half-coated with gold) aggregates into clusters in the presence of a Gaussian optical potential and disaggregates when the optical potential is switched off. We show that the underlying mechanism is the existence of a hydrodynamic flow induced by a temperature gradient generated by the light absorption at the metallic patches on the Janus particles. We also perform simulations, which agree well with the experiments and whose results permit us to clarify the underlying mechanism. The possibility of hydrodynamic-flux-induced reversible clustering may have applications in the fields of drug delivery, cargo transport, bioremediation and biopatterning.

Inversion of thermodiffusive properties of ionic colloidal dispersions in water-DMSO mixtures probed by forced Rayleigh scattering

Thermodiffusion properties at room temperature of colloidal dispersions of hydroxyl-coated nanoparticles (NPs) are probed in water, in dimethyl sulfoxide (DMSO) and in mixtures of water and DMSO at various proportions of water, [Formula: see text]. In these polar solvents, the positive NPs superficial charge imparts the systems with a strong electrostatic interparticle repulsion, slightly decreasing from water to DMSO, which is here probed by Small Angle Neutron Scattering and Dynamic Light Scattering. However if submitted to a gradient of temperature, the NPs dispersed in water with ClO₄^- counterions present a thermophilic behavior, the same NPs dispersed in DMSO with the same counterions present a thermophobic behavior. Mass diffusion coefficient [Formula: see text] and Ludwig-Soret coefficient [Formula: see text] are measured as a function of NP volume fraction [Formula: see text] at various [Formula: see text]. The [Formula: see text]-dependence of [Formula: see text] is analyzed in terms of thermoelectric and thermophoretic contributions as a function of [Formula: see text]. Using two different models for evaluating the Eastman entropy of transfer of the co- and counterions in the mixtures, the single-particle thermophoretic contribution (the NP's Eastman entropy of transfer) is deduced. It is found to evolve from negative in water to positive in DMSO. It is close to zero on a large range of [Formula: see text] values, meaning that in this [Formula: see text]-range [Formula: see text] largely depends on the thermoelectric effect of free co- and counterions.

Particle motion driven by non-uniform thermodynamic forces

We present a complete reciprocal description of particle motion inside multi-component fluids that extends the conventional Onsager formulation of non-equilibrium transport to systems where the thermodynamic forces are non-uniform on the colloidal scale. Based on the dynamic length and time scale separation in suspensions, the particle flux is shown to be related to the volume-averaged coupling between the Stokes flow tensor and the thermodynamic force density acting on the fluid. The flux is then expressed in terms of thermodynamic quantities that can be computed from the interfacial properties and equation of state of the colloids. Our results correctly describe diffusion and sedimentation and suggest that force-free phoretic motion can occur even in the absence of interfacial interactions, provided that the thermodynamic gradients are non-uniform at the colloidal surface. In particular, we derive an explicit hydrodynamic form for the phoretic force resulting from these non-uniform gradients. The form is validated by the recovery of the Henry function for electrophoresis and the Ruckenstein term for thermophoresis.

DNA aptamers for the recognition of HMGB1 from Plasmodium falciparum

Rapid Diagnostic Tests (RDTs) for malaria are restricted to a few biomarkers and antibody-mediated detection. However, the expression of commonly used biomarkers varies geographically and the sensibility of immunodetection can be affected by batch-to-batch differences or limited thermal stability. In this study we aimed to overcome these limitations by identifying a potential biomarker and by developing molecular sensors based on aptamer technology. Using gene expression databases, ribosome profiling analysis, and structural modeling, we find that the High Mobility Group Box 1 protein (HMGB1) of Plasmodium falciparum is highly expressed, structurally stable, and present along all blood-stages of P. falciparum infection. To develop biosensors, we used in vitro evolution techniques to produce DNA aptamers for the recombinantly expressed HMG-box, the conserved domain of HMGB1. An evolutionary approach for evaluating the dynamics of aptamer populations suggested three predominant aptamer motifs. Representatives of the aptamer families were tested for binding parameters to the HMG-box domain using microscale thermophoresis and rapid kinetics. Dissociation constants of the aptamers varied over two orders of magnitude between nano- and micromolar ranges while the aptamer-HMG-box interaction occurred in a few seconds. The specificity of aptamer binding to the HMG-box of P. falciparum compared to its human homolog depended on pH conditions. Altogether, our study proposes HMGB1 as a candidate biomarker and a set of sensing aptamers that can be further developed into rapid diagnostic tests for P. falciparum detection.

Thermophoresis of a Colloidal Rod: Contributions of Charge and Grafted Polymers

In this study, we investigated the thermodiffusion behavior of a colloidal model system as a function of the Debye length, λ_DH, which is controlled by the ionic strength. Our system consists of an fd-virus grafted with poly(ethylene glycol) (PEG) with a molecular mass of 5000 g mol^-1. The results are compared with recent measurements on a bare fd-virus and with results of PEG. The diffusion coefficients of both viruses are comparable and increase with the increasing Debye length. The thermal diffusion coefficient, D_T, of the bare virus increases strongly with the Debye length, whereas D_T of the grafted fd-virus shows only a very weak increase. The Debye length dependence of both systems can be described with an expression derived for charged rods using the surface charge density and an offset of D_T as adjustable parameters. It turns out that the ratio of the determined surface charges is inverse to the ratio of the surfaces of the two systems, which means that the total charge remains almost constant. The determined offset of the grafted fd-virus describing the chemical contributions is the sum of D_T of PEG and the offset of the bare fd-virus. At high λ_DH, corresponding to the low ionic strength, the S_T values of both colloidal model systems approach each other. This implies a contribution from the polymer layer, which is strong at short λ_DH and fades out for the longer Debye lengths, when the electric double layer reaches further than the polymer chains and therefore dominates interactions with the surrounding water.

Thermodiffusion of citrate-coated γ-Fe2O3 nanoparticles in aqueous dispersions with tuned counter-ions - anisotropy of the Soret coefficient under a magnetic field

Under a temperature gradient, the direction of thermodiffusion of charged γ-Fe2O3 nanoparticles (NPs) depends on the nature of the counter-ions present in the dispersion, resulting in either a positive or negative Soret coefficient. Various counter-ions are probed in finely tuned and well characterized dispersions of citrate-coated NPs at comparable concentrations of free ionic species. The Soret coefficient ST is measured in stationary conditions together with the mass-diffusion coefficient Dm using a forced Rayleigh scattering method. The strong interparticle repulsion, determined by SAXS, is also attested by the increase of Dm with NP volume fraction Φ. The Φ-dependence of ST is analyzed in terms of thermophoretic and thermoelectric contributions of the various ionic species. The obtained single-particle thermophoretic contribution of the NPs (the Eastman entropy of transfer ŝNP) varies linearly with the entropy of transfer of the counter-ions. This is understood in terms of electrostatic contribution and of hydration of the ionic shell surrounding the NPs. Two aqueous dispersions, respectively, with ST > 0 and with ST < 0 are then probed under an applied field H[combining right harpoon above], and an anisotropy of Dm and of ST is induced while the in-field system remains monophasic. Whatever the H[combining right harpoon above]-direction (parallel or perpendicular to the gradients and ), the Soret coefficient is modulated keeping the same sign as in zero applied field. In-field experimental determinations are well described using a mean field model of the interparticle magnetic interaction.

Determining phoretic mobilities with Onsager's reciprocal relations: Electro- and thermophoresis revisited

We use a hydrodynamic reciprocal approach to phoretic motion to derive general expressions for the electrophoretic and thermophoretic mobility of weakly charged colloids in aqueous electrolyte solutions. Our approach shows that phoretic motion can be understood in terms of the interfacial transport of thermodynamic excess quantities that arises when a colloid is kept stationary inside a bulk fluid flow. The obtained expressions for the mobilities are extensions of previously known results as they can account for different hydrodynamic boundary conditions at the colloidal surface, irrespective of how the colloid-fluid interaction range compares to the colloidal radius.

Thermodiffusion of repulsive charged nanoparticles - the interplay between single-particle and thermoelectric contributions

Thermodiffusion of different ferrite nanoparticles (NPs), ∼10 nm in diameter, is explored in tailor-made aqueous dispersions stabilized by electrostatic interparticle interactions. In the dispersions, electrosteric repulsion is the dominant force, which is tuned by an osmotic-stress technique, i.e. controlling of osmotic pressure Π, pH and ionic strength. It is then possible to map Π and the NPs' osmotic compressibility χ in the dispersion with a Carnahan-Starling formalism of effective hard spheres (larger than the NPs' core). The NPs are here dispersed with two different surface ionic species, either at pH ∼ 2 or 7, leading to a surface charge, either positive or negative. Their Ludwig-Soret ST coefficient together with their mass diffusion Dm coefficient are determined experimentally by forced Rayleigh scattering. All probed NPs display a thermophilic behavior (ST < 0) regardless of the ionic species used to cover the surface. We determine the NPs' Eastman entropy of transfer and the Seebeck (thermoelectric) contribution to the measured Ludwig-Soret coefficient in these ionic dispersions. The NPs' Eastman entropy of transfer ŝNP is interpreted through the electrostatic and hydration contributions of the ionic shell surrounding the NPs.

Thermoelectricity in Heterogeneous Nanofluidic Channels

Ionic fluids are essential to energy conversion, water desalination, drug delivery, and lab-on-a-chip devices. Ionic transport in nanoscale confinements and complex physical fields still remain elusive. Here, a nanofluidic system is developed using nanochannels of heterogeneous surface properties to investigate transport properties of ions under different temperatures. Steady ionic currents are observed under symmetric temperature gradients, which is equivalent to generating electricity using waste heat (e.g., electronic chips and solar panels). The currents increase linearly with temperature gradient and nonlinearly with channel size. Contributions to ion motion from temperatures and channel properties are evaluated for this phenomenon. The findings provide insights into the study of confined ionic fluids in multiphysical fields, and suggest applications in thermal energy conversion, temperature sensors, and chip-level thermal management.

Electrically Enhanced Self-Thermophoresis of Laser-Heated Janus Particles under a Rotating Electric Field

The motion of a laser-heated Janus particle is experimentally measured under a rotating electric field. Directionally circular motions of the Janus particle following or countering the direction of the rotating electric field are observed in the low-frequency region (from 1 to 6 kHz) depending on the direction of electrorotation. In the higher frequency region (>10 kHz), only pure electrorotation and electrothermal flow are observed. By measuring the dependence of the frequency, voltage, and laser heating power, we propose that the tangential component of circular motion is caused by electric field enhanced self-thermophoresis, which is proportional to the laser heating power and the electric field. This result indicates that thermophoresis could be modified by the induced zeta potential of the Janus particle tuned by the applied electric fields. By this mechanism, the intrinsic thermophoresis can be enhanced several times at a relatively low applied voltage (~3 Volt). Electrically tunable thermophoresis of a particle may bring new insights to thermophoresis phenomenon and also open a new direction for tunable active materials.

Probing of molecular replication and accumulation in shallow heat gradients through numerical simulations

How can living matter arise from dead matter? All known living systems are built around information stored in RNA and DNA. To protect this information against molecular degradation and diffusion, the second law of thermodynamics imposes the need for a non-equilibrium driving force. Following a series of successful experiments using thermal gradients, we have shown that heat gradients across sub-millimetre pores can drive accumulation, replication, and selection of ever longer molecules, implementing all the necessary parts for Darwinian evolution. For these lab experiments to proceed with ample speed, however, the temperature gradients have to be quite steep, reaching up to 30 K per 100 μm. Here we use computer simulations based on experimental data to show that 2000-fold shallower temperature gradients - down to 100 K over one metre - can still drive the accumulation of protobiomolecules. This finding opens the door for various environments to potentially host the origins of life: volcanic, water-vapour, or hydrothermal settings. Following the trajectories of single molecules in simulation, we also find that they are subjected to frequent temperature oscillations inside these pores, facilitating e.g. template-directed replication mechanisms. The tilting of the pore configuration is the central strategy to achieve replication in a shallow temperature gradient. Our results suggest that shallow thermal gradients across porous rocks could have facilitated the formation of evolutionary machines, significantly increasing the number of potential sites for the origin of life on young rocky planets.

A unified description of colloidal thermophoresis

We use the dynamic length and time scale separation in suspensions to formulate a general description of colloidal thermophoresis. Our approach allows an unambiguous definition of separate contributions to the colloidal flux and clarifies the physical mechanisms behind non-equilibrium motion of colloids. In particular, we derive an expression for the interfacial force density that drives single-particle thermophoresis in non-ideal fluids. The issuing relations for the transport coefficients explicitly show that interfacial thermophoresis has a hydrodynamic character that cannot be explained by a purely thermodynamic consideration. Our treatment generalises the results from other existing approaches, giving them a clear interpretation within the framework of non-equilibrium thermodynamics.

What Controls Thermo-osmosis? Molecular Simulations Show the Critical Role of Interfacial Hydrodynamics

Thermo-osmotic and related thermophoretic phenomena can be found in many situations from biology to colloid science, but the underlying molecular mechanisms remain largely unexplored. Using molecular dynamics simulations, we measure the thermo-osmosis coefficient by both mechanocaloric and thermo-osmotic routes, for different solid-liquid interfacial energies. The simulations reveal, in particular, the crucial role of nanoscale interfacial hydrodynamics. For nonwetting surfaces, thermo-osmotic transport is largely amplified by hydrodynamic slip at the interface. For wetting surfaces, the position of the hydrodynamic shear plane plays a key role in determining the amplitude and sign of the thermo-osmosis coefficient. Finally, we measure a giant thermo-osmotic response of the water-graphene interface, which we relate to the very low interfacial friction displayed by this system. These results open new perspectives for the design of efficient functional interfaces for, e.g., waste-heat harvesting.

Light-harvesting synthetic nano- and micromotors: a review

Nano- and micromotors are machines that can be made to perform specialized tasks as they propel themselves in response to certain stimuli. While the design of these self-propelling nano- and micromotors remains challenging, they have nevertheless attracted considerable research due to their many promising applications. Most self-propelled nano- and micromotors are based on the conversion of chemical energy into mechanical movement. Recently, however, the development of motors that can be propelled by light as an external stimulus has received much attention. The reason being that light is a renewable energy source that does not require any physical connection to the motor, does not usually lead to any waste products, and is easy to control. This review highlights recent progress in the development of light-harvesting synthetic motors that can be efficiently propelled and accurately controlled by exposure to light, and gives an overview of their fabrication methods, propulsion mechanisms, and practical applications.

Molecular Simulation of Thermo-osmotic Slip

Thermo-osmotic slip-the flow induced by a thermal gradient along a surface-is a well-known phenomenon, but curiously there is a lack of robust molecular-simulation techniques to predict its magnitude. Here, we compare three different molecular-simulation techniques to compute the thermo-osmotic slip at a simple solid-fluid interface. Although we do not expect the different approaches to be in perfect agreement, we find that the differences are barely significant for a range of different physical conditions, suggesting that practical molecular simulations of thermo-osmotic slip are feasible.

Influence of temperature and charge effects on thermophoresis of polystyrene beads⋆

We study the thermodiffusion behavior of spherical polystyrene beads with a diameter of 25 nm by infrared thermal diffusion Forced Rayleigh Scattering (IR-TDFRS). Similar beads were used to investigate the radial dependence of the Soret coefficient by different authors. While Duhr and Braun (Proc. Natl. Acad. Sci. U.S.A. 104, 9346 (2007)) observed a quadratic radial dependence Braibanti et al. (Phys. Rev. Lett. 100, 108303 (2008)) found a linear radial dependence of the Soret coefficient. We demonstrated that special care needs to be taken to obtain reliable thermophoretic data, because the measurements are very sensitive to surface properties. The colloidal particles were characterized by transmission electron microscopy and dynamic light scattering (DLS) experiments were performed. We carried out systematic thermophoretic measurements as a function of temperature, buffer and surfactant concentration. The temperature dependence was analyzed using an empirical formula. To describe the Debye length dependence we used a theoretical model by Dhont. The resulting surface charge density is in agreement with previous literature results. Finally, we analyze the dependence of the Soret coefficient on the concentration of the anionic surfactant sodium dodecyl sulfate (SDS), applying an empirical thermodynamic approach accounting for chemical contributions.

Thermodiffusion, molecular diffusion and Soret coefficients of aromatic+n-alkane binary mixtures

In the present work, we have measured the thermodiffusion coefficient of 51 binary liquid mixtures at 25 ^oC. These mixtures correspond to the series of the aromatics toluene and 1-methylnaphthalene with n-alkanes nCi (i = 6, 8, 10, 12, and 14) at different mass fractions in the whole range. For that, we have used the thermogravitational technique. It is shown that the thermodiffusion coefficient is a linear function of the mass fraction in all the mixtures. Extrapolating the lines, we obtain the thermodiffusion coefficient in dilute solutions of n-alkanes for both toluene and 1-methylnaphthalene. These limiting values show a linear dependence with the inverse of the product of the molecular weights. In addition, we have measured the molecular diffusion coefficient of all the mixtures at 0.5 of mass fraction and at 25 ^oC, by the sliding symmetric tubes technique. It is observed that the product of this coefficient with the viscosity at the same concentrations takes a constant value for each of the series considered. Finally, we have also determined the Soret coefficient of the equimass mixtures by the combination of the measurements of thermodiffusion and molecular diffusion coefficients.