Miniemulsion synthesis of metal-oxo cluster containing copolymer nanobeads

Paramagnetic Mn8Fe4-co-Polystyrene Nanobeads as a Potential T1-T2 Multimodal Magnetic Resonance Imaging Contrast Agent with In Vivo Studies

In developing a cluster-nanocarrier design, as a magnetic resonance imaging contrast agent, we have investigated the enhanced relaxivity of a manganese and iron-oxo cluster grafted within a porous polystyrene nanobead with increased relaxivity due to a higher surface area. The synthesis of the cluster-nanocarrier for the cluster Mn8Fe4O12(O2CC6H4CH═CH2)16(H2O)4, cross-linked with polystyrene (the nanocarrier), under miniemulsion conditions is described. By including a branched hydrophobe, iso-octane, the resulting nanobeads are porous and ∼70 nm in diameter. The increased surface area of the nanobeads compared to nonporous nanobeads leads to an enhancement in relaxivity; r1 increases from 3.8 to 5.2 ± 0.1 mM-1 s-1, and r2 increases from 11.9 to 50.1 ± 4.8 mM-1 s-1, at 9.4 teslas, strengthening the potential for T1 and T2 imaging. Several metrics were used to assess stability, and the porosity produced no reduction in metal stability. Synchrotron X-ray fluorescence microscopy was used to demonstrate that the nanobeads remain intact in vivo. In depth, physicochemical characteristics were determined, including extensive pharmacokinetics, in vivo imaging, and systemic biodistribution analysis.

Paramagnetic Clusters of Mn3(O2CCH3)6(Bpy)2 in Polyacrylamide Nanobeads as a New Design Approach to a T1- T2 Multimodal Magnetic Resonance Imaging Contrast Agent

There is an increasing need for gadolinium-free magnetic resonance imaging (MRI) contrast agents, particularly for patients suffering from chronic kidney disease. Using a cluster-nanocarrier combination, we have identified a novel approach to the design of biomedical nanomaterials and report here the criteria for the cluster and the nanocarrier and the advantages of this combination. We have investigated the relaxivity of the following manganese oxo clusters: the parent cluster Mn₃(O₂CCH₃)₆(Bpy)₂ (1) where Bpy = 2,2'-bipyridine and three new analogs, Mn₃(O₂CC₆H₄CH═CH₂)₆(Bpy)₂ (2), Mn₃(O₂CC(CH₃)═CH₂)₆(Bpy)₂ (3), and Mn₃O(O₂CCH₃)₆(Pyr)₂ (4) where Pyr = pyridine. The parent cluster, Mn₃(O₂CCH₃)₆(Bpy)₂ (1), had impressive relaxivity ( r₁ = 6.9 mM^-1 s^-1, r₂ = 125 mM^-1 s^-1) and was found to be the most amenable for the synthesis of cluster-nanocarrier nanobeads. Using the inverse miniemulsion polymerization technique (1) in combination with the hydrophilic monomer acrylamide, we synthesized nanobeads (∼125 nm diameter) with homogeneously dispersed clusters within the polyacrylamide matrix (termed Mn₃Bpy-PAm). The nanobeads were surface-modified by co-polymerization with an amine-functionalized monomer. This enabled various postsynthetic modifications, for example, to attach a near-IR dye, Cyanine7, as well as a targeting agent. When evaluated as a potential multimodal MRI contrast agent, high relaxivity and contrast were observed with r₁ = 54.4 mM^-1 s^-1 and r₂ = 144 mM^-1 s^-1, surpassing T₁ relaxivity of clinically used Gd-DTPA chelates as well as comparable T₂ relaxivity to iron oxide microspheres. Physicochemical properties, cellular uptake, and impacts on cell viability were also investigated.

Dual Role of Zirconium Oxoclusters in Hybrid Nanoparticles: Cross-Linkers and Catalytic Sites

Organic-inorganic hybrid nanoparticles are prepared by free-radical copolymerization of methyl methacrylate (MMA) with the structurally well-defined methacrylate-functionalized zirconium oxocluster Zr₄O₂(methacrylate)₁₂. The polymerization process occurs in the confined space of miniemulsion droplets. The formation of covalent chemical bonds between the organic and the inorganic counterparts improves the distribution of the guest species (oxoclusters) in the polymer particles, overcoming problems related to migration, leaching, and stability. Because of the presence of a high number of double bonds (12 per oxocluster), the oxoclusters act as efficient cross-linking units for the resulting polymer matrix, thus ruling its swelling behavior in organic solvents. The synthesized hybrid nanostructures are applied as heterogeneous systems in the catalytic oxidation of an organic sulfide to the corresponding sulfoxide and sulfone by hydrogen peroxide, displaying quantitative sulfide conversion in 4-24 h, with overall turnover numbers (TON) up to 8000 after 4 cycles.

Recent advances in the preparation of hybrid nanoparticles in miniemulsions

In this review, we summarize recent advances in the synthesis of hybrid nanoparticles in miniemulsions since 2009. These hybrid nanoparticles include organic-inorganic, polymeric, and natural macromolecule/synthetic polymer hybrid nanoparticles. They may be prepared through encapsulation of inorganic components or natural macromolecules by miniemulsion (co)polymerization, simultaneous polymerization of vinyl monomers and vinyl-containing inorganic precursors, precipitation of preformed polymers in the presence of inorganic constituents through solvent displacement techniques, and grafting polymerization onto, from or through natural macromolecules. Characterization, properties, and applications of hybrid nanoparticles are also discussed.

Hybrid Materials Based on the Embedding of Organically Modified Transition Metal Oxoclusters or Polyoxometalates into Polymers for Functional Applications: A Review

The covalent incorporation of inorganic building blocks into a polymer matrix to obtain stable and robust materials is a widely used concept in the field of organic-inorganic hybrid materials, and encompasses the use of different inorganic systems including (but not limited to) nanoparticles, mono- and polynuclear metal complexes and clusters, polyhedral oligomeric silsesquioxanes (POSS), polyoxometalates (POM), layered inorganic systems, inorganic fibers, and whiskers. In this paper, we will review the use of two particular kinds of structurally well-defined inorganic building blocks, namely transition metals oxoclusters (TMO) and polyoxometalates (POM), to obtain hybrid materials with enhanced functional (e.g., optical, dielectric, magnetic, catalytic) properties.

Magnetic nanobeads as potential contrast agents for magnetic resonance imaging

Metal-oxo clusters have been used as building blocks to form hybrid nanomaterials and evaluated as potential MRI contrast agents. We have synthesized a biocompatible copolymer based on a water stable, nontoxic, mixed-metal-oxo cluster, Mn8Fe4O12(L)16(H2O)4, where L is acetate or vinyl benzoic acid, and styrene. The cluster alone was screened by NMR for relaxivity and was found to be a promising T2 contrast agent, with r1 = 2.3 mM(-1) s(-1) and r2 = 29.5 mM(-1) s(-1). Initial cell studies on two human prostate cancer cell lines, DU-145 and LNCap, reveal that the cluster has low cytotoxicity and may be potentially used in vivo. The metal-oxo cluster Mn8Fe4(VBA)16 (VBA = vinyl benzoic acid) can be copolymerized with styrene under miniemulsion conditions. Miniemulsion allows for the formation of nanometer-sized paramagnetic beads (~80 nm diameter), which were also evaluated as a contrast agent for MRI. These highly monodispersed, hybrid nanoparticles have enhanced properties, with the option for surface functionalization, making them a promising tool for biomedicine. Interestingly, both relaxivity measurements and MRI studies show that embedding the Mn8Fe4 core within a polymer matrix decreases r2 effects with little effect on r1, resulting in a positive T1 contrast enhancement.

Facile and Rapid Access to Glyconanocapsules by CuAAC Interfacial Polyaddition in Miniemulsion Conditions

Glyconanocapsules with a biocompatible oily core have been successfully prepared by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) interfacial step growth polymerization between 6,6'-diazido-6,6'-dideoxysucrose and bis(propargyloxy)butane in oil-in-water miniemulsion conditions. Optimization of the interfacial polymerization process in dispersed medium afforded the rapid and reproducible preparation of stable monodispersed glyconanocapsules having a diameter around 200 nm.