Expedient generation of patterned surface aldehydes by microfluidic oxidation for chemoselective immobilization of ligands and cells

Microelectrode Arrays, Electrocatalysis, and the Need for Proper Characterization

Indirect electrochemical methods are a powerful tool for synthetic chemistry because they allow for the optimization of chemical selectivity in a reaction while maintaining the advantages of electrochemistry in terms of sustainability. Recently, we have found that such methods provide a handle for not only the synthesis of complex molecules, but also the construction of complex, addressable molecular surfaces. In this effort, the indirect electrochemical methods enable the placement or synthesis of molecules by any electrode or set of electrodes in a microelectrode array. The success of these surface-based reactions are typically evaluated with the use of fluorescence labelling studies. However, these fluorescence-based evaluations can be misleading. While they are excellent for determining that a reaction has occurred in a site-selective fashion on an array, they do not provide information on whether that reaction is the one desired or how well it worked. We describe here how the use of a "safety-catch" linker strategy allows for a more accurate assessment of reaction quality on an array, and then use that capability to illustrate how the use of transition metal mediated cross-coupling reactions on an array prevent unwanted background reactions that can occur on a polymer-coated electrode surface. The method enables a unique level of quality control for array-based transformations.

Microelectrical Impedance Spectroscopy for the Differentiation between Normal and Cancerous Human Urothelial Cell Lines: Real-Time Electrical Impedance Measurement at an Optimal Frequency

PURPOSE

To distinguish between normal (SV-HUC-1) and cancerous (TCCSUP) human urothelial cell lines using microelectrical impedance spectroscopy (μEIS).

MATERIALS AND METHODS

Two types of μEIS devices were designed and used in combination to measure the impedance of SV-HUC-1 and TCCSUP cells flowing through the channels of the devices. The first device (μEIS-OF) was designed to determine the optimal frequency at which the impedance of two cell lines is most distinguishable. The μEIS-OF trapped the flowing cells and measured their impedance at a frequency ranging from 5 kHz to 1 MHz. The second device (μEIS-RT) was designed for real-time impedance measurement of the cells at the optimal frequency. The impedance was measured instantaneously as the cells passed the sensing electrodes of μEIS-RT.

RESULTS

The optimal frequency, which maximized the average difference of the amplitude and phase angle between the two cell lines (p < 0.001), was determined to be 119 kHz. The real-time impedance of the cell lines was measured at 119 kHz; the two cell lines differed significantly in terms of amplitude and phase angle (p < 0.001).

CONCLUSION

The μEIS-RT can discriminate SV-HUC-1 and TCCSUP cells by measuring the impedance at the optimal frequency determined by the μEIS-OF.

Introduction to Microelectrode Arrays, the Site-Selective Functionalization of Electrode Surfaces, and the Real-Time Detection of Binding Events

Microelectrode arrays have great potential as analytical tools because currents can be independently measured at each electrode in the array. In principle, these currents can be monitored in order to follow in real time the binding events that occur between the members of a molecular library and a biological target. To capitalize on this potential, the surface of the array must be selectively functionalized so that each unique member of the molecular library is associated with a unique individually addressable electrode or set of electrodes in the array. To this end, this instructional review summarizes methods for coating the arrays with porous polymers that allow for the attachment of molecules to the surface of the array, selectively conducting reactions at individual electrodes in the array, characterizing molecules that are placed on the arrays, and running the analytical experiments needed to monitor in real time binding events between molecules on the array and a biological target.

Developing chemoselective and biodegradable polyester elastomers for bioscaffold application

Thermal polyesterification has emerged as a successful method for synthesizing polyesters for biomedical applications. However, to date, no general functionalization strategy has been incorporated into materials designed by the thermal polycondensation of polyacids and polyols. Herein, we report the design of several elastomers based on the thermal polycondensation of 4-ketopimelic acid, citric acid, and one of two diols: 1,6-hexanediol or 1,4-cyclohexanedimethanol. By varying the diol and the curing conditions, several elastomers were designed with a range of physical and mechanical properties. Poly(diol 4-ketopimelate-co-diol citrate) achieved Young's modulus, ultimate tensile stress, and rupture strain values of 0.39-1.13 MPa, 0.27-1.04 MPa, and 108-426%, respectively. Additionally, the incorporation of the ketone from 4-ketopimelic acid gave these materials two advantageous characteristics: a site for covalent functionalization through oxime formation and the ability to covalently bond to the surrounding tissue through imine linkages. Biocompatibility was studied both in vitro and in vivo in order to gain a complete understanding as to how biological systems respond to these novel materials. Based on preliminary results, we believe that poly(diol 4-ketopimelate-co-diol citrate) polyketoesters are excellent candidates for biomaterials.

Patterned self-assembled monolayers: efficient, chemically defined tools for cell biology

Self-assembled monolayers (SAMs) of alkanethiolates on gold can be used to carefully probe immobilized biomolecule interactions with cell-surface receptors. However, due to a lack of experimental throughput associated with labor-intensive production, specialized fabrication apparatus, and other practical challenges, alkanethiolate SAMs have not had widespread use by biological researchers. In this Minireview, we investigate a range of techniques that could enhance the throughput of SAM-based approaches by patterning substrates with arrays of different conditions. Here we highlight microfluidic, photochemical, localized removal, and backfilling techniques to locally pattern SAM substrates with biomolecules and also describe how these approaches have been applied in SAM-based screening systems. Furthermore we provide perspectives on several crucial barriers that need to be overcome to enable widespread use of SAM chemistry in biological applications.

Biomolecular modification of carbon nanotubes for studies of cell adhesion and migration

We report a strategy for tailoring and patterning carbon nanotubes (CNTs) for biospecific cell studies. We synthesized a new electroactive hydroquinone terminated pyrene molecule to tailor CNTs. These modified CNTs can be oxidized and chemoselectively reacted with oxyamine tethered ligands to generate various ligand tethered CNTs. A cell adhesive Arg-Gly-Asp peptide (RGD) is immobilized to the CNTs and a new microfluidic patterning method is employed to generate multiplex patterned surfaces for biospecific cell adhesion and migration studies. This work demonstrates the integration of a new functionalization strategy to immobilize a variety of ligands to CNTs for a range of potential drug delivery, tissue imaging and cellular behavior studies and a microfluidic patterning strategy for generating complex high-throughput surfaces for biotechnological and cell based assay applications.

Engineering cell surfaces via liposome fusion

In this study, we have rewired cell surfaces with ketone and oxyamine molecules based on liposome fusion for applications in cell-surface engineering. Lipid vesicles, functionalized with ketone and oxyamine molecules, display complementary chemistry and undergo recognition, docking, and subsequent fusion upon covalent oxime bond formation. Liposome fusion was characterized by several techniques including matrix-assisted laser-desorption/ionization mass spectrometry (MALDI-MS), light scattering, fluorescence resonance energy transfer (FRET), and transmission electron microscopy (TEM). When cultured with cells, ketone- and oxyamine-containing liposomes undergo spontaneous membrane fusion to present the respective molecules from cell surfaces. Ketone-functionalized cell surfaces serve as sites for chemoselective ligation with oxyamine-conjugated molecules. We tailored and fluorescently labeled cell surfaces with an oxyamine-conjugated rhodamine dye. As an application of this cell-surface engineering strategy, ketone- and oxyamine-functionalized cells were patterned on oxyamine- and ketone-presenting surfaces, respectively. Cells adhered, spread, and proliferated in the patterned regions via interfacial oxime linkage. The number of ketone molecules on the cell surface was also quantified by flow cytometry.

Chemically well-defined self-assembled monolayers for cell culture: toward mimicking the natural ECM

The extracellular matrix (ECM) is a network of biological macromolecules that surrounds cells within tissues. In addition to serving as a physical support, the ECM actively influences cell behavior by providing sites for cell adhesion, establishing soluble factor gradients, and forming interfaces between different cell types within a tissue. Thus, elucidating the influence of ECM-derived biomolecules on cell behavior is an important aspect of cell biology. Self-assembled monolayers (SAMs) have emerged as promising tools to mimic the ECM as they provide chemically well-defined substrates that can be precisely tailored for specific cell culture applications, and their application in this regard is the focus of this review. In particular, this review will describe various approaches to prepare SAM-based culture substrates via non-specific adsorption, covalent immobilization, or non-covalent sequestering of ECM-derived biomolecules. Additionally, this review will highlight SAMs that present ECM-derived biomolecules to cells to probe the role of these molecules in cell-ECM interactions, including cell attachment, spreading and 'outside-in' signaling via focal adhesion complex formation. Finally, this review will introduce SAMs that can present or sequester soluble signaling molecules, such as growth factors, to study the influence of localized soluble factor activity on cell behavior. Together, these examples demonstrate that the chemical specificity and variability afforded by SAMs can provide robust, well-defined substrates for cell culture that can simplify experimental design and analysis by eliminating many of the confounding factors associated with traditional culture substrates.

Redox-switchable surface for controlling peptide structure

A general surface chemistry strategy is described for the development of a new switchable material. The method modulates a surface-immobilized-molecules structure by using two orthogonal "click" reactions based on Huisgen cycloaddition and oxime chemistry, where the oxime linkage is redox active and switchable. We demonstrate this strategy by developing a noninvasive, biocompatible, in situ surface chemistry that is able to modulate the affinity of a cell-adhesive peptide to cell integrin receptors to study dynamic cell adhesion and cell migration in real time and as a new hide-and-reveal strategy for application in new types of smart biofouling biomaterials.

Protein nanopatterns by oxime bond formation

Patterning proteins on the nanoscale is important for applications in biology and medicine. As feature sizes are reduced, it is critical that immobilization strategies provide site-specific attachment of the biomolecules. In this study, oxime chemistry was exploited to conjugate proteins onto nanometer-sized features. Poly(Boc-aminooxy tetra(ethylene glycol) methacrylate) was synthesized by free radical polymerization. The polymer was patterned onto silicon wafers using an electron beam writer. Trifluoroacetic acid removal of the Boc groups provided the desired aminooxy functionality. In this manner, patterns of concentric squares and contiguous bowtie shapes were fabricated with 150-170-nm wide features. Ubiquitin modified at the N-terminus with an α-ketoamide group and N(ε)-levulinyl lysine-modified bovine serum albumin were subsequently conjugated to the polymer nanopatterns. Protein immobilization was confirmed by fluorescence microscopy. Control studies on protected surfaces and using proteins presaturated with O-methoxyamine indicated that attachment occurred via oxime bond formation.

Fabrication of dynamic self-assembled monolayers for cell migration and adhesion studies

How cells interact with the extracellular matrix (ECM) is important for a number of fundamental -processes in cell biology. However, the ECM is highly complex and in order to simplify the matrix for cell biological studies, it has been modeled with self-assembled monolayers (SAMs) of alkanethiolates on gold substrates. In this chapter, we outline procedures to create dynamic surfaces by functionalizing SAMs. SAMs based on quinone, oxyamine, and alcohol-terminated thiols were used to immobilize cell adhesive peptides with spatial control. Cells were seeded to these surfaces to provide cell co-culture -patterns suitable for biological studies.

Tandem surface microfluidic lithography and activation to generate patch pattern biospecific ligand and cell arrays

We report a rapid, inexpensive, and flexible methodology that combines microfluidic lithography and oxidative activation to pattern and chemically alter selective regions of SAMs on gold for subsequent chemoselective ligand immobilization. We demonstrate that PCC, a mild oxidant, can be used to convert hydroxyl-terminated SAMs to aldehydes and decorated with a variety of oxyamine-containing molecules. This strategy is compatible with cell culture and was employed to create a biospecific ligand platform for peptide-mediated, cell adhesion arrays. By using a number of different ligands and characterization tools, we showed that the generation of both cell patterning and ligand microarray patterning can be achieved. SAM formation, activation, ligand immobilization, and biospecific cell patterning are characterized by contact angle, cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS) (Supporting Information), scanning electron microscopy (SEM), and fluorescence microscopy.

Renewable and optically transparent electroactive indium tin oxide surfaces for chemoselective ligand immobilization and biospecific cell adhesion

In this report, we show the successful transfer of a sophisticated electroactive immobilization and release strategy to an indium tin oxide (ITO) surface to generate (1) optically transparent, robust, and renewable surfaces, (2) inert surfaces that resist nonspecific protein adsorption and cell attachment, and (3) tailored biospecific surfaces for live-cell high-resolution fluorescence microscopy of cell culture. By comparing the surface chemistry properties on both ITO and gold surfaces, we demonstrate the ITO surfaces are superior to gold as a renewable surface, in robustness (durability), and as an optically transparent material for live-cell fluorescence microscopy studies of cell behavior. These advantages will make ITO surfaces a desired platform for numerous biosensor and microarray applications and as model substrates for various cell biological studies.