Stimuli-Triggered Off/On Switchable Complexation between a Novel Type of Charge-Generation Polymer (CGP) and Gold Nanoparticles for the Sensitive Colorimetric Detection of Hydrogen Peroxide and Glucose

A New Chitosan-Modified Paper-Based SERS Glucose Sensor with Enhanced Reproducibility, Stability, and Sensitivity for Non-Enzymatic Label-Free Detection

We have fabricated a new highly reproducible, stable, and sensitive cellulose paper-based Surfaced-enhanced Raman scattering (SERS) sensor substrate for non-enzymatic label-free glucose detection. To enhance reproducibility, stability, and sensitivity, the cellulose paper (CP) substrate has been modified with a naturally derived biocompatible polymer, chitosan (CS), followed by depositing enormous amount of plasmonic silver nanoparticles (AgNPs) on CP/CS and finally forming a self-assembling monolayer of 4-mercaptophenyl boronic acid (MPBA) on CP/CS/AgNPs (CP/CS/AgNPs/MPBA). The SERS sensor substrate is characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared (FT-IR), and X-ray diffraction (XRD) spectroscopy techniques. The glucose sensing is achieved by monitoring the SERS intensity of C-S and B-O stretching vibrations at 1072 cm-1 in MPBA, which is gradually increased with increasing concentration of glucose due to the increasing orientation change of MPBA on AgNPs. The results show that the proposed glucose paper-based SERS sensor exhibits a high analytical enhancement factor (AEF) (3.4 × 107), enhanced reproducibility (<7%), improved stability (>5 weeks), excellent selectivity towards other metabolic compounds, and high sensitivity with a limit of detection (LOD) of 0.74 mM and a linear dynamic range between 1.0 and 7.0 mM. The practical application of this SERS sensor is examined in real spiked and non-spiked human blood serum samples for the detection of glucose, and satisfactory recovery results have been obtained, demonstrating the potentiality of the present paper-based SERS sensor for non-enzymatic label-free glucose detection in real biological samples.

Charge-Selective Aggregation Behavior of Thermoresponsive Polyelectrolytes Having Low Charge Density in Aqueous Solutions of Organic Counterions

The aggregation behavior of thermoresponsive polyelectrolytes with low charge density in aqueous solutions of organic counterions was investigated. We synthesized two thermoresponsive polyelectrolytes: anionic poly(N-isopropylacrylamide-co-(3-sulfopropyl)acrylamide potassium) (P-NIP-SPAK) and cationic poly(N-isopropylacrylamide-co-(3-acrylamidepropyl)trimethylammonium chloride) (P-NIP-AAPTAC). The polyelectrolytes remained soluble in their aqueous solutions even above the lower critical soluble temperature of P-NIP owing to the strong hydration property of the ionic groups. The aggregation occurred when organic counterions were added to the solution. In these solution systems, the concentration of counterions exceeds those of ionic groups introduced into the polyelectrolytes. The aggregation behavior is attributed to the salting-out effect of counterions accommodated near the polyelectrolyte surface by electrostatic interaction. This aggregation behavior was utilized for the charge-selective recognition of amino acids. P-NIP-SPAK aggregated only when basic amino acids were added under acidic conditions, whereas P-NIP-AAPTAC aggregated only when acidic amino acids were added under basic conditions. The results herein demonstrate that P-NIP-SPAK and P-NIP-AAPTAC have the potential to be used as charge-selective polymer sensors for amino acids without having to strictly control the experimental conditions.

Gold nanostructures: synthesis, properties, and neurological applications

Recent advances in technology are expected to increase our current understanding of neuroscience. Nanotechnology and nanomaterials can alter and control neural functionality in both in vitro and in vivo experimental setups. The intersection between neuroscience and nanoscience may generate long-term neural interfaces adapted at the molecular level. Owing to their intrinsic physicochemical characteristics, gold nanostructures (GNSs) have received much attention in neuroscience, especially for combined diagnostic and therapeutic (theragnostic) purposes. GNSs have been successfully employed to stimulate and monitor neurophysiological signals. Hence, GNSs could provide a promising solution for the regeneration and recovery of neural tissue, novel neuroprotective strategies, and integrated implantable materials. This review covers the broad range of neurological applications of GNS-based materials to improve clinical diagnosis and therapy. Sub-topics include neurotoxicity, targeted delivery of therapeutics to the central nervous system (CNS), neurochemical sensing, neuromodulation, neuroimaging, neurotherapy, tissue engineering, and neural regeneration. It focuses on core concepts of GNSs in neurology, to circumvent the limitations and significant obstacles of innovative approaches in neurobiology and neurochemistry, including theragnostics. We will discuss recent advances in the use of GNSs to overcome current bottlenecks and tackle technical and conceptual challenges.

Application of Au or Ag nanomaterials for colorimetric detection of glucose

In recent years, Au and Ag nanomaterials have been widely used in the determination of glucose owing to their specific properties such as large specific surface area, high extinction coefficient, strong localized surface plasmon resonance effect and enzyme-mimicking activity. Compared with other methods, colorimetric determination of glucose with Au or Ag nanomaterials features the advantages of simple operation, low cost and easy observation. In this review, several typical synthesis methods of Au and Ag nanomaterials are introduced. Strategies for the colorimetric determination of glucose by Au or Ag nanomaterials are elaborated. The challenges and prospects of the application of Au or Ag nanomaterials for colorimetric detection of glucose are also discussed.

Hydrogen Peroxide-Triggered Conversion of Boronic Acid-Appended Insulin into Insulin and Its Application as a Glucose-Responsive Insulin Formulation

p-Boronophenylmethoxycarbonyl (BPmoc) is a protecting group for amines that is removable by treatment with hydrogen peroxide (H₂O₂). We prepared BPmoc-modified insulin (BPmoc-Ins) and subcutaneously injected the formulation into diabetic rats. The results demonstrated that BPmoc effectively sealed the blood glucose (Glc)-lowering effects of Ins. Conversely, coinjection of BPmoc-Ins and Glc oxidase (GOx) resulted in reduced blood Glc levels, indicating that Ins was generated from BPmoc-Ins through the following reactions: oxidation of endogenous Glc by GOx; production of H₂O₂ accompanied by Glc oxidation; removal of BPmoc residues by H₂O₂. These results show the potential of BPmoc-Ins for a Glc-responsive Ins release system.

A novel method for the rapid sensing of H2O2 using a colorimetric AuNP probe and its DFT study

Hydrogen peroxide (H₂O₂) has tremendous applications in industry, medicine and in our day-to-day lives. It is toxic to human health upon exposure at a high concentration. Therefore, a green and cost-effective sensing technique is greatly needed for the sensitive naked eye detection of peroxide. This study is mainly focused on the synthesis of Au nanoparticles (AuNPs) using an aqueous extract of Elsholtzia blanda, a flower that is widely available in the North Eastern part of India, the characterization of which was carried out using different analytical techniques. The bioactive molecule (epigallocatechin gallate) present in the aqueous extract was identified, isolated and confirmed through high-performance liquid chromatography-photodiode array, high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy analysis which could be responsible for the reduction of Au³⁺ ions. By approaching this greener route, the synthesized nanomaterial was further used as a colorimetric probe for the detection of H₂O₂ and the degradation of AuNPs was observed. The limit of detection was found to be 0.7435 μM in the present work. The degradation of the AuNPs was found to be linearly dependent on peroxide concentration. Along with these results, kinetic studies were carried out by considering different effects to monitor the sensing speed of the AuNPs. The plausible mechanism of the work was supported by density functional theory study.

Glucose Detection of 4-Mercaptophenylboronic Acid-Immobilized Gold-Silver Core-Shell Assembled Silica Nanostructure by Surface Enhanced Raman Scattering

The importance of glucose in many biological processes continues to garner increasing research interest in the design and development of efficient biotechnology for the sensitive and selective monitoring of glucose. Here we report on a surface-enhanced Raman scattering (SERS) detection of 4-mercaptophenyl boronic acid (4-MPBA)-immobilized gold-silver core-shell assembled silica nanostructure (SiO₂@Au@Ag@4-MPBA) for quantitative, selective detection of glucose in physiologically relevant concentration. This work confirmed that 4-MPBA converted to 4-mercaptophenol (4-MPhOH) in the presence of H₂O₂. In addition, a calibration curve for H₂O₂ detection of 0.3 µg/mL was successfully detected in the range of 1.0 to 1000 µg/mL. Moreover, the SiO₂@Au@Ag@4-MPBA for glucose detection was developed in the presence of glucose oxidase (GOx) at the optimized condition of 100 µg/mL GOx with 1-h incubation time using 20 µg/mL SiO₂@Au@Ag@4-MPBA and measuring Raman signal at 67 µg/mL SiO₂@Au@Ag. At the optimized condition, the calibration curve in the range of 0.5 to 8.0 mM was successfully developed with an LOD of 0.15 mM. Based on those strategies, the SERS detection of glucose can be achieved in the physiologically relevant concentration range and opened a great promise to develop a SERS-based biosensor for a variety of biomedicine applications.

A pH/H2O2 dual triggered nanoplatform for enhanced photodynamic antibacterial efficiency

Bacterial infection and biofilms cause non-healing chronic wounds and threaten human health. Although antibiotics still play an irreplaceable role to treat infectious diseases in clinics, increasing attention has been paid to the problem of multidrug resistance (MDR). As a novel strategy to deal with bacterial infection, photodynamic antimicrobial therapy (PDAT) has shown promising potential to reduce bacterial infection, and stimuli-responsive nanomaterials have been shown to enhance the antibacterial efficiency and postpone the emergence of drug-resistant bacteria. In this work, we developed a bacterial microenvironment-responsive nanoplatform to eliminate bacteria and bacterial biofilms under 650 nm laser irradiation. Reversible addition-fragmentation chain transfer (RAFT) polymerization was applied to synthesize an H2O2 responsive block copolymer of POEGMA-b-PBMA, and the antibacterial drug of porphyrin TAPP was loaded to form nanoparticles (PT) by a co-assembled approach. At the infection area with overexpressed peroxide, nanoparticles were disintegrated due to the cleaved boronic ester leading to the release of TAPP. Furthermore, the released TAPP became protonated in the acidic infection area (pH = 5.5) and then enhanced its photodynamic antibacterial efficacy by producing higher singlet oxygen (1O2) levels under light irradiation. Both in vitro and in vivo antimicrobial and biofilm elimination experiments demonstrated that the responsive nanoplatform combined with PDAT has tremendous potential for the treatment of infections.

One-pot HTST synthesis of responsive fluorescent ZnO@apo-enzyme composite microgels for intracellular glucometry

Responsive fluorescent microgels, that can selectively, reversibly, and rapidly convert the fluctuation in intracellular glucose level into fluorescence signal, have the potential use for intracellular glucometry to promote the understanding of physiology. Herein, we report one-pot synthesis of such a responsive fluorescent composite microgels, which is made of a representative apo-enzyme, apo-glucose oxidase (apo-GOx), interpenetrated in a composite gel network that is comprised of ZnO quantum dots covalently bonded onto crosslinked poly(ethylene glycol) dimethacrylate. The key of this one-pot synthesis is applying a high-temperature short-time heating (HTST) method, so that the naturally dynamic profile of apo-GOx can be maintained and harnessed on the composite microgels to allow the highly selective response to glucose over a glucose concentration range of 0-20 mM. While the composite microgels can undergo volume phase transitions and convert both an increase and a decrease in glucose concentration into fluorescence signal shortly (<1 s), the changes in average hydrodynamic diameter and fluorescence of the composite microgels can be fully reversible even after twenty cycles of adding/removing glucose, indicating a reversible and rapid time response to the glucose concentration variations. With the composite microgels as biosensors, the fluorescence of the composite microgels embedded in the model cancer cells B16F10 can be modulated in response to intracellular glucose level variations, which are derived from a change in glucose concentration in the culture medium by an external supply, or that can be triggered by biochemical reactions (with the β-galactosidase catalysed hydrolysis of lactose as a model reaction for achieving increased glucose levels, and the GOx catalysed oxidation of glucose for achieving decreased glucose levels).

Dual-Locking Nanoparticles Disrupt the PD-1/PD-L1 Pathway for Efficient Cancer Immunotherapy

The clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated (Cas) enzyme, Cas13a, holds great promise in cancer treatment due to its potential for selective destruction of tumor cells via collateral effects after target recognition. However, these collateral effects do not specifically target tumor cells and may cause safety issues when administered systemically. Herein, a dual-locking nanoparticle (DLNP) that can restrict CRISPR/Cas13a activation to tumor tissues is described. DLNP has a core-shell structure, in which the CRISPR/Cas13a system (plasmid DNA, pDNA) is encapsulated inside the core with a dual-responsive polymer layer. This polymer layer endows the DLNP with enhanced stability during blood circulation or in normal tissues and facilitates cellular internalization of the CRISPR/Cas13a system and activation of gene editing upon entry into tumor tissue. After carefully screening and optimizing the CRISPR RNA (crRNA) sequence that targets programmed death-ligand 1 (PD-L1), DLNP demonstrates the effective activation of T-cell-mediated antitumor immunity and the reshaping of immunosuppressive tumor microenvironment (TME) in B16F10-bearing mice, resulting in significantly enhanced antitumor effect and improved survival rate. Further development by replacing the specific crRNA of target genes can potentially make DLNP a universal platform for the rapid development of safe and efficient cancer immunotherapies.

Galectin-1 protein modified gold (III)-PEGylated complex-nanoparticles: Proof of concept of alternative probe in colorimetric glucose detection

Galectins (Gal) are a family of dimeric lectins, composed by two galactoside-binding sites implicated in the regulation of cancer progression and immune responses. In this study, we report for the first time the synthesis and the physical-chemical characterization of galectin-1-complex-gold COOH-terminated polyethlenglicole (PEG)-coated NPs (Gal-1 IN PEG-AuNPs) and their ability to recognize glucose in an aqueous solution with a concentration varying from 10 mM to 100 pM. The chemical protocol consistsof three steps: (i) complexation between galectin-1Gal-1 and tetrachloroauric acid (HAuCl₄) to form gold-protein grains; (ii) staking process of COOH-terminated polyethlenglicole molecules (PEG) onto Gal-1-Au complex and (iii) reduction of hybrid metal ions to obtain a colloidal stable solution. During the complexation, the spectral signatures related to the Gal-1 orientation on the gold surface have been found to change due to its protonation state. The effective glucose monitoring was detected by UV-vis, Raman spectroscopy and Transmission Electron Microscopy (TEM). Overall, we observed that the interaction is strongly dependent on the Gal-1 conformation at the surface of gold nanoparticles.

Easy and inexpensive method for the visual and electronic detection of oxidants in air by using vinylic films with embedded aniline

Conventional nonconductive vinylic films with dispersed aniline change their color and become conductive in the presence of specific oxidant gases, namely, chlorine and hydrogen peroxide. The color change arises from the polymerization of the aniline to yield the conjugated polymer polyaniline, which at the same time renders the flexible vinylic films conductive. We present a simple and straightforward method using both colorimetric and electrical responses to detect and quantify the presence of oxidants (Cl₂ and H₂O₂) in the air. Using RGB analysis (red, green and blue parameters defining the colors in digital pictures on a computer display) based on different pictures taken with a smartphone of discs extracted from the films and by measuring the UV-vis spectral variation in the presence of different concentrations of Cl₂ and H₂O₂, we obtained limits of detection and quantification between 15 and 200 ppb_v for H₂O₂ and between 37 and 583 ppb_v for Cl₂. Additionally, the electrical response was measured using a fabricated device to visually detect the electrical conductivity activation of the sensor in the presence of oxidant atmospheres, detecting a rapid decrease in resistivity (three orders of magnitude) when the polymerization of aniline began, changing the film from non-conductive to conductive.

Completely degradable backbone-type hydrogen peroxide responsive curcumin copolymer: synthesis and synergistic anticancer investigation

So far, several different kinds of polymer based drug delivery systems have been developed one after another.

ROS-Responsive Chalcogen-Containing Polycarbonates for Photodynamic Therapy

Reactive oxygen species (ROS)-responsive polymers have attracted attention for their potential in photodynamic therapy. Herein, we report the ROS-responsive aliphatic polycarbonates prepared by the ring-opening polymerization (ROP) of three six-membered cyclic carbonate monomers with ethyl selenide, phenyl selenide or ethyl telluride groups. Under catalysis of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), all three monomers underwent the controlled anionic ROP, showing a feature of equilibrium polymerization due to the bulky effect of 5,5-disubstituents. With PEG macroinitiator, three series amphiphilic block copolymers were prepared. They could form spherical nanoparticles of ∼100 nm, which were stable in neutral phosphate buffer but dissociated rapidly under triggering of H₂O₂. We studied the H₂O₂-induced oxidation profiles of selenide- or telluride-containing small molecules by ¹H NMR and revealed the factors that affect the oxidation kinetics and products. On this basis, the oxidative degradation mechanism of the copolymer nanoparticles has been clarified. Under the same oxidative condition, the telluride-containing nanoparticle degraded with the fastest rate while the phenyl selenide-based one degraded most slowly. These ROS-responsive nanoparticles could load photosensitizer chlorin e6 (Ce6) and anticancer drug doxorubicin (DOX). Under red light irradiation, Ce6-sensitized production of ¹O₂ that triggered the degradation of nanoparticles, resulting in an accelerated payload release. In vitro cytotoxicity assays demonstrate that the nanoparticles coloaded with DOX and Ce6 exhibited a synergistic cell-killing effect to MCF-7 cells, representing a novel responsive nanoplatform for PDT and/or chemotherapy.

Secondary structure-induced aggregation by hydrogen peroxide: a stimuli-triggered open/close implementation by recombination

The fabrication of reactive aggregation nanomaterials through assemblies in a facile and cost-effective manner is much desired but remains to be well explored. Here we show that exquisite and ultra-long (>2 μm) hybrid polymer nanorods (NRs) can be formed by a simple self-assembly of a phenylboronic acid modified genistein crosslinker (Ge-di(HMPBA-pin)) and d-α-tocopheryl polyethylene glycol 1000 (TPGS). The obtained NRs exhibit quantitative and sensitive colorimetric detection of H₂O₂ with a remarkable detection limit for different stromal materials. More significantly, the presence of H₂O₂ triggers a distinct morphological transformation of the polymer NR assembly into the secondary structure of micelles via the oxidative deboronation of boronate moieties in HMPBA-pin-SA. It spontaneously induces the aggregation of metal nanoparticles (Au NPs), metal nanorods (Au NRs), quantum dots (MoS₂ QDs), metal ions (Cu²⁺), protein (ferritin) and tetraphenylethene (TPE) molecules, giving rise to a dramatic stimuli-triggered open/close switchable complexation and apparent colorimetric transitions in vitro. This study, for the first time, showcases the fascinating advantages of such unprecedented secondary structure-induced aggregation and uncovers the immense potential to design a plethora of other sensing systems by virtue of the alternate trigger-specific, sacrifice-aggregated building moieties.

Anti-inflammatory polymersomes of redox-responsive polyprodrug amphiphiles with inflammation-triggered indomethacin release characteristics

Inflammation serves as a natural defense mechanism to protect living organisms from infectious diseases. Nonsteroidal anti-inflammatory drugs (NSAIDs) can help relieve inflammatory reactions and are clinically used to treat pain, fever, and inflammation, whereas long-term use of NSAIDs may lead to severe side effects including gastrointestinal damage and cardiovascular toxicity. Therefore, it is of increasing importance to configure new dosing strategies and alleviate the side effects of NSAIDs. Towards this goal, glutathione (GSH)-responsive disulfide bonds and hydrogen peroxide (H₂O₂)-reactive phenylboronic ester linkages were utilized as triggering moieties in this work to design redox-responsive prodrug monomers and polyprodrug amphiphiles based on indomethacin (IND) drug. Note that IND is a widely prescribed NSAID in the clinic. Starting from three types of redox-reactive IND prodrug monomers, redox-responsive polyprodrug amphiphiles were synthesized through reversible addition-fragmentation chain transfer (RAFT) polymerizations of prodrug monomers using poly(ethylene oxide) (PEO)-based macroRAFT agent. The resultant polyprodrug amphiphiles with high IND loading contents (>33 wt%) could self-assemble into polymersomes with PEO shielding coronas and redox-responsive bilayer membranes composed of IND prodrugs. Upon incubation with GSH or H₂O₂, controlled release of intact IND in the active form from polyprodrug polymersomes was actuated by GSH-mediated disulfide cleavage reaction and H₂O₂-mediated oxidation of phenylboronic ester moieties, respectively, followed by self-immolative degradation events. Furthermore, in vitro studies at the cellular level revealed that redox-responsive polymersomes could efficiently relieve inflammatory responses induced by lipopolysaccharide (LPS) in RAW264.7 macrophage cells.

Facile Synthesis of H2O2-Cleavable Poly(ester-amide)s by Passerini Multicomponent Polymerization

We report the straightforward synthesis of two types of H₂O₂-cleavable poly(ester-amide)s (P1 and P2) via the Passerini multicomponent polymerization (P-MCP) of 4-formylbenzeneboronic acid pinacol ester with 1,6-diisocyanohexane and 1,6-hexanedioic acid or a polyethylene glycol (PEG) dicarboxylic acid. The H₂O₂-cleavable phenylboronic acid ester was integrated into the polymer backbone by the in situ formed benzyl ester bond. GPC and ¹H NMR confirmed the complete H₂O₂-triggered degradation of these polymers in aqueous medium by a mechanism of sequential oxidation of phenylboronic acid ester and self-immolative elimination. Compared with the hydrophobic polymer P1, the PEG-based water-soluble polymer P2 degraded much faster even at a lower H₂O₂ concentration. Cytocompatible nanoparticles of polymer P1 loaded with fluorescent Nile red were fabricated, and controlled release of Nile red in response to H₂O₂ was achieved, thus, demonstrating the utility of these polymers as potential H₂O₂-responsive delivery vehicles.

Design, synthesis and properties of a reactive chromophoric/fluorometric probe for hydrogen peroxide detection

A succinct chromophoric/fluorometric probe, AVPM, for sensitive and selective H₂O₂detection.

An activatable anticancer polymer–drug conjugate based on the self-immolative azobenzene motif

Triggered cellular uptake of a synthetic graft copolymer carrying an anticancer drug is achieved through self-immolation of the side-chain azobenzene groups.

Stimuli-Responsive Block Copolymer-Based Assemblies for Cargo Delivery and Theranostic Applications

Although a number of tactics towards the fabrication and biomedical exploration of stimuli-responsive polymeric assemblies being responsive and adaptive to various factors have appeared, the controlled preparation of assemblies with well-defined physicochemical properties and tailor-made functions are still challenges. These responsive polymeric assemblies, which are triggered by stimuli, always exhibited reversible or irreversible changes in chemical structures and physical properties. However, simple drug/polymer nanocomplexes cannot deliver or release drugs into the diseased sites and cells on-demand due to the inevitable biological barriers. Hence, utilizing therapeutic or imaging agents-loaded stimuli-responsive block copolymer assemblies that are responsive to tumor internal microenvironments (pH, redox, enzyme, and temperature, etc.) or external stimuli (light and electromagnetic field, etc.) have emerged to be an important solution to improve therapeutic efficacy and imaging sensitivity through rationally designing as well as self-assembling approaches. In this review, we summarize a portion of recent progress in tumor and intracellular microenvironment responsive block copolymer assemblies and their applications in anticancer drug delivery and triggered release and enhanced imaging sensitivity. The outlook on future developments is also discussed. We hope that this review can stimulate more revolutionary ideas and novel concepts and meet the significant interest to diverse readers.

Physical, Chemical, and Biological Structures based on ROS-Sensitive Moieties that are Able to Respond to Oxidative Microenvironments

Reactive oxygen species (ROS) (H2 O2 , OCl(-) , (•) OH, O2 (-) ) are a family of reactive molecules that are generated intracellularly and are engaged in many biological processes. In physiological concentrations, ROS act as signaling molecules to a number of metabolic pathways; however, in excess they can be harmful to living organisms. Overproduction of ROS has been related to many pathophysiological conditions and a number of studies have been reported in elucidating their mechanism in these conditions. With the aim of harnessing this role, a number of imaging tools and therapeutic compounds have been developed. Here these imaging and therapeutic tools are reviewed and particularly those structures with ROS-sensitivity based on their biomedical applications and their functional groups. There is also a brief discussion about the method of preparation as well as the mechanism of action.

Adaptive soft molecular self-assemblies

Adaptive molecular self-assemblies provide possibility of constructing smart and functional materials in a non-covalent bottom-up manner. Exploiting the intrinsic properties of responsiveness of non-covalent interactions, a great number of fancy self-assemblies have been achieved. In this review, we try to highlight the recent advances in this field. The following contents are focused: (1) environmental adaptiveness, including smart self-assemblies adaptive to pH, temperature, pressure, and moisture; (2) special chemical adaptiveness, including nanostructures adaptive to important chemicals, such as enzymes, CO2, metal ions, redox agents, explosives, biomolecules; (3) field adaptiveness, including self-assembled materials that are capable of adapting to external fields such as magnetic field, electric field, light irradiation, and shear forces.

Oxidation and temperature dual responsive polymers based on phenylboronic acid and N-isopropylacrylamide motifs

Oxidation and temperature dual responsive copolymers using ROS as a target for drug delivery have been demonstrated.

Bioinspired synthesis of poly(phenylboronic acid) microgels with high glucose selectivity at physiological pH

A microgel that is more sensitive towards glucose than to other saccharides is made of 4-vinylphenylboronic acid crosslinked withN,N′-bis(propene)perylene-3,4,9,10-tetracarboxyldiimide.

Glucose-responsive microgels based on apo-enzyme recognition

Glucose-responsive microgels that can undergo reversible and rapid volume phase transitions were made of apo-glucose oxidase interpenetrated in a poly(N-isopropylacrylamide) network.

Gold Nanocluster-Assisted Fluorescent Detection for Hydrogen Peroxide and Cholesterol Based on the Inner Filter Effect of Gold Nanoparticles

We developed a simple, sensitive inner filter effect (IFE)-based fluorescent assay for sensing H2O2 and cholesterol. In the process, poly(vinylpyrrolidone)-protected gold nanoparticles (PVP-AuNPs) and fluorescent BSA-protected gold nanoclusters (BSA-AuNCs) were used as an IFE absorber/fluorophore pair. PVP-AuNPs can be a powerful absorber to influence the emission of the fluorophore, BSA-AuNCs, in the IFE-based fluorescent assays. That is due to the high extinction coefficient of AuNPs and the complementary overlap between the surface plasmon resonance (SPR) absorption of PVP-AuNPs and the excitation of BSA-AuNCs. The PVP-Au seeds, produced by directly mixing PVP with HAuCl4, were able to catalyze H2O2 to enlarge AuNPs. The SPR absorption of PVP-AuNPs was enhanced with an increased concentration of H2O2 and, subsequently, induced significant fluorescence quenching of BSA-AuNCs. The IFE-based fluorescent assay enabled the detection of H2O2 and generation of H2O2 in the presence of O2/cholesterol and cholesterol oxidase (ChOx) by the fluorescence response of BSA-AuNCs. The present IFE-based approach can detect H2O2 ranging from 1 to 100 μM with a detection limit of 0.8 μM and cholesterol ranging from 1 to 100 μM with a detection limit of 1.4 μM.

Hyperbranched Self-Immolative Polymers (hSIPs) for Programmed Payload Delivery and Ultrasensitive Detection

Upon stimuli-triggered single cleavage of capping moieties at the focal point and chain terminal, self-immolative dendrimers (SIDs) and linear self-immolative polymers (l-SIPs) undergo spontaneous domino-like radial fragmentation and cascade head-to-tail depolymerization, respectively. The nature of response selectivity and signal amplification has rendered them a unique type of stimuli-responsive materials. Moreover, novel design principles are required for further advancement in the field of self-immolative polymers (SIPs). Herein, we report the facile fabrication of water-dispersible SIPs with a new chain topology, hyperbranched self-immolative polymers (hSIPs), by utilizing one-pot AB2 polycondensation methodology and sequential postfunctionalization. The modular engineering of three categories of branching scaffolds, three types of stimuli-cleavable capping moieties at the focal point, and seven different types of peripheral functional groups and polymeric building blocks affords both structurally and functionally diverse hSIPs with chemically tunable amplified-release features. On the basis of the hSIP platform, we explored myriad functions including visible light-triggered intracellular release of peripheral conjugated drugs in a targeted and spatiotemporally controlled fashion, intracellular delivery and cytoplasmic reductive milieu-triggered plasmid DNA release via on/off multivalency switching, mitochondria-targeted fluorescent sensing of H2O2 with a detection limit down to ∼20 nM, and colorimetric H2O2 assay via triggered dispersion of gold nanoparticle aggregates. To further demonstrate the potency and generality of the hSIP platform, we further configure it into biosensor design for the ultrasensitive detection of pathologically relevant antigens (e.g., human carcinoembryonic antigen) by integrating with enzyme-mediated cycle amplification with positive feedback and enzyme-linked immunosorbent assay (ELISA).

Bioresponsive probes for molecular imaging: concepts and in vivo applications

Molecular imaging is a powerful tool to visualize and characterize biological processes at the cellular and molecular level in vivo. In most molecular imaging approaches, probes are used to bind to disease-specific biomarkers highlighting disease target sites. In recent years, a new subset of molecular imaging probes, known as bioresponsive molecular probes, has been developed. These probes generally benefit from signal enhancement at the site of interaction with its target. There are mainly two classes of bioresponsive imaging probes. The first class consists of probes that show direct activation of the imaging label (from "off" to "on" state) and have been applied in optical imaging and magnetic resonance imaging (MRI). The other class consists of probes that show specific retention of the imaging label at the site of target interaction and these probes have found application in all different imaging modalities, including photoacoustic imaging and nuclear imaging. In this review, we present a comprehensive overview of bioresponsive imaging probes in order to discuss the various molecular imaging strategies. The focus of the present article is the rationale behind the design of bioresponsive molecular imaging probes and their potential in vivo application for the detection of endogenous molecular targets in pathologies such as cancer and cardiovascular disease.

Enzymatic ‘charging’ of synthetic polymers

Enzymatic action is shown to transform a chemically neutral polymer chain into a chemically charged cationic structure.

Recent advances towards the fabrication and biomedical applications of responsive polymeric assemblies and nanoparticle hybrid superstructures

We highlight recent developments, microstructural control, and biomedical applications of stimuli-responsive polymeric assemblies and responsive hybrid superstructures.

Real-time monitoring of H2O2 release from single cells using nanoporous gold microelectrodes decorated with platinum nanoparticles

We present a self-supported nanoporous gold/PtNPs microelectrode with the sub-nanomolar sensitivity to detect H₂O₂ release from single cells.

Switchable glucose-responsive volume phase transition behavior of poly(phenylboronic acid) microgels

We report a poly(phenylboronic acid) microgel that can display switchable glucose-responsive volume phase transition behavior with temperature as a trigger.