Optimizing the Performance of Conjugated Polymers in Organic Photovoltaic Cells by Traversing Group 16

Diselenophene-Dithioalkylthiophene Based Quinoidal Small Molecules for Ambipolar Organic Field Effect Transistors

This work presents a series of novel quinoidal organic semiconductors based on diselenophene-dithioalkylthiophene (DSpDST) conjugated cores with various side-chain lengths (-thiohexyl, -thiodecyl, and -thiotetradecyl, designated DSpDSTQ-6, DSpDSTQ-10, and DSpDSTQ-14, respectively). The purpose of this research is to develop solution-processable organic semiconductors using dicyanomethylene end-capped organic small molecules for organic field effect transistors (OFETs) application. The physical, electrochemical, and electrical properties of these new DSpDSTQs are systematically studied, along with their performance in OFETs and thin film morphologies. Additionally, the molecular structures of DSpDSTQ are determined through density functional theory (DFT) calculations and single-crystal X-ray diffraction analysis. The results reveal the presence of intramolecular S (alkyl)···Se (selenophene) interactions, which result in a planar SR-containing DSpDSTQ core, thereby promoting extended π-orbital interactions and efficient charge transport in the OFETs. Moreover, the influence of thioalkyl side chain length on surface morphologies and microstructures is investigated. Remarkably, the compound with the shortest thioalkyl chain, DSpDSTQ-6, demonstrates ambipolar carrier transport with the highest electron and hole mobilities of 0.334 and 0.463 cm2 V-1 s-1 , respectively. These findings highlight the excellence of ambipolar characteristics of solution-processable OFETs based on DSpDSTQs even under ambient conditions.

Dual Chalcogen-Bonding Interactions for the Conformational Control of Urea

Dual chalcogen-bonding interactions is proposed as a novel means for the conformational control of urea derivatives. The formation of a chalcogen-bonding interaction at both sides of the urea carbonyl group was unambiguously confirmed by X-ray diffraction as well as computational studies including non-covalent interaction (NCI) plot index analysis, quantum theory of atoms in molecules (QTAIM) analysis, and natural bond orbital (NBO) analysis via DFT calculations. By virtue of this dual interaction, urea derivatives that bear chalcogen atoms (X=S and Se) adopt a planar structure via the carbonyl oxygen (O) with an X⋅⋅⋅O⋅⋅⋅X arrangement on the same side of the molecule. The rigidity of the conformational lock was evaluated using the molecular arrangement in the crystal and the rotational barrier of benzochalcogenophene ring, which indicated a stronger conformational lock in benzoselenophene than in benzothiophene urea derivatives. Furthermore, the acidity of the urea derivatives increases according to the Lewis-acidic properties of the chalcogen-bonding interactions, whereby benzoselenophene urea is more acidic than benzothiophene urea. Tweezer-shaped urea derivatives were prepared, and their stereostructure proved the viability of the conformational control for defining the location of the substituents on the urea framework.

Intramolecular Palladium Catalyst Transfer on Benzoheterodiazoles as Acceptor Monomers and Discovery of Catalyst Transfer Inhibitors

Intramolecular catalyst transfer on benzoheterodiazoles was investigated in Suzuki-Miyaura coupling reactions and polymerization reactions with t Bu3 PPd precatalyst. In the coupling reactions of dibromobenzotriazole, dibromobenzoxazole, and dibromobenzothiadiazole with pinacol phenylboronate, the product ratios of monosubstituted product to disubstituted product were 0/100, 27/73, and 89/11, respectively, indicating that the Pd catalyst undergoes intramolecular catalyst transfer on dibromobenzotriazole, whereas intermolecular transfer occurs in part in the case of dibromobenzoxazole and is predominant for dibromobenzothiadiazole. The polycondensation of 1.3 equivalents of dibromobenzotriazole with 1.0 equivalent of para- and meta-phenylenediboronates afforded high-molecular-weight polymer and cyclic polymer, respectively. In the case of dibromobenzoxazole, however, para- and meta-phenylenediboronates afforded moderate-molecular-weight polymer with bromine at both ends and cyclic polymer, respectively. In the case of dibromobenzothiadiazole, they afforded low-molecular-weight polymers with bromine at both ends. Addition of benzothiadiazole derivatives interfered with catalyst transfer in the coupling reactions.

Synthesis and Characterization of Novel Thienothiadiazole-Based D-π-A-π-D Fluorophores as Potential NIR Imaging Agents

As fluorescence bioimaging has increased in popularity, there have been numerous reports on designing organic fluorophores with desirable properties amenable to perform this task, specifically fluorophores with emission in the near-infrared II (NIR-II) region. One such strategy is to utilize the donor-π-acceptor-π-donor approach (D-π-A-π-D), as this allows for control of the photophysical properties of the resulting fluorophores through modulation of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels. Herein, we illustrate the properties of thienothiadiazole (TTD) as an effective acceptor moiety in the design of NIR emissive fluorophores. TTD is a well-known electron-deficient species, but its use as an acceptor in D-π-A-π-D systems has not been extensively studied. We employed TTD as an acceptor unit in a series of two fluorophores and characterized the photophysical properties through experimental and computational studies. Both fluorophores exhibited emission maxima in the NIR-I that extends into the NIR-II. We also utilized electron paramagnetic resonance (EPR) spectroscopy to rationalize differences in the measured quantum yield values and demonstrated, to our knowledge, the first experimental evidence of radical species on a TTD-based small-molecule fluorophore. Encapsulation of the fluorophores using a surfactant formed polymeric nanoparticles, which were studied by photophysical and morphological techniques. The results of this work illustrate the potential of TTD as an acceptor in the design of NIR-II emissive fluorophores for fluorescence bioimaging applications.

Exploring the distinct conformational preferences of allyl ethyl ether and allyl ethyl sulfide using rotational spectroscopy and computational chemistry

The conformational energy landscapes of allyl ethyl ether (AEE) and allyl ethyl sulfide (AES) were investigated using Fourier transform microwave spectroscopy in the frequency range of 5-23 GHz aided by density functional theory B3LYP-D3(BJ)/aug-cc-pVTZ calculations. The latter predicted highly competitive equilibria for both species, including 14 unique conformers of AEE and 12 for the sulfur analog AES within 14 kJ mol-1. The experimental rotational spectrum of AEE was dominated by transitions arising from its three lowest energy conformers, which differ in the arrangement of the allyl side chain, while in AES, transitions due to the two most stable forms, distinct in the orientation of the ethyl group, were observed. Splitting patterns attributed to methyl internal rotation were analyzed for AEE conformers I and II, and the corresponding V3 barriers were determined to be 12.172(55) and 12.373(32) kJ mol-1, respectively. The experimental ground state geometries of both AEE and AES were derived using the observed rotational spectra of the 13C and 34S isotopic species and are highly dependent on the electronic properties of the linking chalcogen (oxygen vs sulfur). The observed structures are consistent with a decrease in hybridization in the bridging atom from oxygen to sulfur. The molecular-level phenomena that drive the conformational preferences are rationalized through natural bond orbital and non-covalent interaction analyses. These show that interactions involving the lone pairs on the chalcogen atom with the organic side chains favor distinct geometries and energy orderings for the conformers of AEE and AES.

Structural-Functional Properties of Asymmetric Fluoro-Alkoxy Substituted Benzothiadiazole Homopolymers with Flanked Chalcogen-Based Heterocycles

The synthesis and characterization of asymmetric alkoxy- are reported, fluoro-benzothiadiazole (BT) acceptor core derivatized with a series of six different heterocycles (selenophene, thiophene, furan, 5-thiazole, 2-thiazole and 2-oxazole). The effect of the flanked-heterocycles containing different chalcogen atoms of the six homopolymers (HPX) is studied using optical, thermal, electrochemical, and computational analysis. Computational calculations indicate a strong relationship between the most stable conformation for each homopolymer and their bearing heterocycle, thus homopolymers HPSe', HPTp', HPFu', and HPTzC5, adopted the syn-syn and syn-anti conformations due to their noncovalent interactions with shorter distances, while HPTzC2' and HPOx' demonstrate preference for the anti-anti conformation. Optical property studies of the homopolymers reveal a strong red-shift in solution and film upon exchanging the chalcogen atom from Oxygen < Sulfur < Selenium in HPFu, HPTp, and HPSe, respectively. In addition, deeper highest occupied molecular orbital (HOMO) energy levels are observed when the donor-acceptor moieties (HPSe, HPTp, and HPFu) are substituted for the acceptor-acceptor systems such as HPTzC5, HPTzC2, and HPOx. Improved packing and morphology are exhibited for the donor-acceptor homopolymers. Thus, having a flanked heterocycle containing different chalcogen-atoms in polymeric systems is one way of tuning the physicochemical properties of conjugated materials for optoelectronic applications.

Decarboxylative ring-opening of 2-oxazolidinones: a facile and modular synthesis of β-chalcogen amines

We report herein the synthesis of primary and secondary β-chalcogen amines through the regioselective ring-opening reaction of non-activated 2-oxazolidinones promoted by in situ generated chalcogenolate anions. The developed one-step protocol enabled the preparation of β-selenoamines, β-telluroamines and β-thioamines with appreciable structural diversity and in yields of up to 95%.

Fine-tuning directionality of ESIPT behavior of the asymmetric two proton acceptor system via atomic electronegativity

The excited state intramolecular proton transfer (ESIPT) processes and photophysical features of 3-(benzo[d]oxazol-2-yl)-2-hydroxy-5-methoxy benzaldehyde (BOHMB) and 3-(benzo[d]selenazole-2-yl)-2-hydroxy-5-methoxy benzaldehyde (BSeHMB) molecules were investigated in detail by using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. The strengthened excited state hydrogen bonds (H-bond) of the title compounds are favorable to ESIPT process according to the analyses of structural parameter, infrared vibration frequency, electron density and reduced density gradient. The atomic substitution changes the intramolecular H-bond O₁-H₂…O₃ and O₁-H₂…N₄ and the fluorescence emission peaks of BOHMB-N and BSeHMB-N in normal and tautomer forms. The potential energy curves indicate that the ESIPT energy barriers of BOHMB-O, BTHMB-O and BSeHMB-O increase as the electron-withdrawing abilities of atoms (from O to S and Se) are gradually weakened. However, the ESIPT energy barriers of BOHMB-N and BTHMB-N follow the totally opposite order. For BOHMB and BSeHMB, ESIPT process prefers to occur in the direction from O-H group to the O atom.

Correlation of solid-state order to optoelectronic behavior in heterocyclic oligomers

Here we address a longstanding challenge in the field of optoelectronic materials by evaluating the molecular and solid-state arrangements of heterocyclic oligomers and correlating their crystal structures to their optical properties.

Two-Dimensional Conjugated Benzo[1,2-b:4,5-b']diselenophene-Based Copolymer Donor Enables Large Open-Circuit Voltage and High Efficiency in Selenophene-based Organic Solar Cells

A two-dimensional electron-rich fused-ring moiety (ClBDSe) based on benzo[1,2-b:4,5-b']diselenophene is synthesized. Three copolymers (PBDT-Se, PBDSe-T, and PBDSe-Se) are obtained by manipulating the connection types and number of selenophene units on the conjugated main chains with two 2D fused-ring units and two different π-bridges, respectively. In comparison with PBDT-Se and PBDSe-Se, PBDSe-T with benzo[1,2-b:4,5-b']diselenophene unit and thiophene π-bridge exhibits the deepest HOMO energy level and the strongest crystallinity in neat films. The PBDSe-T:Y6 blend film exhibits the best absorption complementarity, the most distinctive face-on orientation with proper phase separation, the highest carrier mobilities, and the lowest charge recombination among three blend films. Finally, the PBDSe-T:Y6-based device delivers an impressive power conversion efficiency (PCE) of 14.50 %, which is higher than those of PBDT-Se:Y6 and PBDSe-Se:Y6. Moreover, a decent open-circuit voltage (V_oc ) of 0.89 V with a remarkably small energy loss of 0.44 eV is achieved for PBDSe-T:Y6. The efficiency of 14.50 % is the highest value for selenophene-containing copolymer-based binary organic solar cells (OSCs). This study provides evidence that introduction of 2D-benzo[1,2-b:4,5-b']diselenophene as a fused electron-rich unit with π-bridging into copolymeric donors is a valid strategy for providing high V_oc and excellent PCE simultaneously in selenophene-based OSCs.

Recent Advances of Furan and Its Derivatives Based Semiconductor Materials for Organic Photovoltaics

The state-of-the-art bulk-heterojunction (BHJ)-type organic solar cells (OSCs) have exhibited power conversion efficiencies (PCEs) of exceeding 18%. Thereinto, thiophene and its fused-ring derivatives play significant roles in facilitating the development of OSCs due to their excellent semiconducting natures. Furan as thiophene analogue, is a ubiquitous motif in naturally occurring organic compounds. Driven by the advantages of furan, such as less steric hindrance, good solubility, excellent stacking, strong rigidity and fluorescence, biomass derived fractions, more and more research groups focus on the furan-based materials for using in OSCs in the past decade. To systematically understand the developments of furan-based photovoltaic materials, the relationships between the molecular structures, optoelectronic properties, and photovoltaic performances for the furan-based semiconductor materials including single furan, benzofuran, benzodifuran (BDF) (containing thienobenzofuran (TBF)), naphthodifurans (NDF), and polycyclic furan are summarized. Finally, the empirical regularities and perspectives of the development of this kind of new organic semiconductor materials are extracted.

Torsional Profiles of Thiophene and Furan Oligomers: Probing the Effects of Heterogeneity and Chain Length

A systematic analysis of the torsional profiles of 55 unique oligomers composed of two to four thiophene and/or furan rings (n = 2 to 4) has been conducted using three density functional theory (DFT) methods along with MP2 and three different coupled-cluster methods. Two planar or quasi-planar minima were identified for each n = 2 oligomer system. In every case, the torsional angle (τ) between the heteroatoms about the carbon-carbon bond connecting the two rings is at or near 180° for the global minimum and 0° for the local minimum, referred to as anti and syn conformations, respectively. These oligomers have rotational barrier heights ranging from ca. 2 kcal mol^-1 for 2,2'-bithiophene to 4 kcal mol^-1 for 2,2'-bifuran, based on electronic energies computed near the CCSD(T) complete basis set (CBS) limit. The corresponding rotational barrier for the heterogeneous 2-(2-thienyl)furan counterpart falls approximately halfway between those values. The energy differences between the minima are approximately 2 and 0.4 kcal mol^-1 for the homogeneous 2,2'-bifuran and 2,2'-bithiophene, respectively, whereas the energy difference between the planar local and global minima (at τ = 0 and 180°, respectively) is only 0.3 kcal mol^-1 for 2-(2-thienyl)furan. Extending these three oligomers by adding one or two additional thiophene and/or furan rings resulted in only minor changes to the torsional profiles when rotating around the same carbon-carbon bond as the two-ring profiles. Relative energy differences between the syn and anti conformations were changed by no more than 0.4 kcal mol^-1 for the corresponding n = 3 and 4 oligomers, while the rotational barrier height increased by no more than 0.8 kcal mol^-1.

Synthesis and triplet sensitization of bis(arylselanyl)BOPHYs; potential application in triplet–triplet annihilation upconversion

Bis(arylselanyl)BOPHYs 1 and 2 were prepared as novel triplet photosensitizers, TTA-UC behavior of 1 with 9,10-diphenylanthracene being investigated.

Evaluating Donor Effects in Isoindigo-Based Small Molecular Fluorophores

Small molecular organic fluorophores have garnered significant interest because of their indispensable use in fluorescence imaging (FI) and optoelectronic devices. Herein, we designed triphenylamine (TPA)-capped donor-acceptor-donor (D-A-D)-based fluorophores having a variation at the heterocyclic donor (D) units, 3,4-ethylenedioxythiophene (EDOT), furan (FURAN), thiophene (THIO), and 1-methyl-1H-pyrrole (MePyr), with isoindigo as the core electron acceptor (A) unit. Synthesis of these fluorophores (II-X-TPA) resulted in four symmetrical dye molecules: II-EDOT-TPA, II-FURAN-TPA, II-THIO-TPA, and II-MePyr-TPA, where TPA functioned as a terminal unit and a secondary electron donor group. Photophysical, electrochemical, and computational analyses were conducted to investigate the effect of heterocyclic donor units on the II-X-TPA derivatives. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations provided insightful features of structural and electronic properties of each fluorophore and correlated well with experimental observations. Electron density distribution maps, overlapping frontier molecular orbital diagrams, and highest occupied molecular orbital (HOMO) to lowest unoccupied molecular orbital (LUMO) electron transfer indicated intramolecular charge transfer (ICT). Theoretical studies confirmed the experimental HOMO energy trend and demonstrated its crucial importance in understanding each heterocycle's donor ability. Stokes shifts of up to ∼178 nm were observed, whereas absorptions and emissions were shifted deeper into the NIR region, resulting from ICT. Results suggest that this isoindigo fluorophore series has potential as a molecular scaffold for the development of efficient FI agents. The studied fluorophores can be further tuned with different donor fragments to enhance the ICT and facilitate in shifting the optical properties further into the NIR region.

Tetrasubstituted Selenophenes from the Stepwise Assembly of Molecular Fragments on a Diiron Frame and Final Cleavage of a Bridging Alkylidene

A series of 2,3-dicarboxylato-5-acetyl-4-aminoselenophenes, 5a–j, was obtained via the uncommon assembly of building blocks on a diiron platform, starting from commercial [Fe₂Cp₂(CO)₄] through the stepwise formation of diiron complexes [2a–d]CF₃SO₃, 3a–d, and 4a–j. The selenophene-substituted bridging alkylidene ligand in 4a–j is removed from coordination upon treatment with water in air under mild conditions (ambient temperature in most cases), affording 5a–j in good to excellent yields. This process is highly selective and is accompanied by the disruption of the organometallic scaffold: cyclopentadiene (CpH) and lepidocrocite (γ-FeO(OH)) were identified by NMR and Raman analyses at the end of one representative reaction. The straightforward cleavage of the linkage between a bridging Fischer alkylidene and two (or more) metal centers, as observed here, is an unprecedented reaction in organometallic chemistry: in the present case, the carbene function is converted to a ketone which is incorporated into the organic product. DFT calculations and electrochemical experiments were carried out to give insight into the release of the selenophene-alkylidene ligand. Compounds 5a–j were fully characterized by elemental analysis, mass spectrometry, IR, and multinuclear NMR spectroscopy and by X-ray diffraction and cyclic voltammetry in one case.

Metal−metal cooperativity in action! Different fragments are combined on the {Fe₂Cp₂(CO)₂} skeleton to give highly functionalized selenophene ligands, linked to the iron centers through a bridging alkylidene, which is easily removed from coordination by exposure to air/water in ethereal solution.

Synthesis of side-chain regioregular and main-chain alternating poly(bichalcogenophene)s and an ABC-type periodic poly(terchalcogenophene)

Three unsymmetrical diiodobichalcogenophenes SSeI2, STeI2, and SeTeI2 and a diiodoterchalcogenophene SSeTeI2 were prepared. Grignard metathesis of SSeI2, STeI2, SeTeI2, and SSeTeI2 occurred regioselectively at the lighter chalcogenophene site because of its relatively lower electron density and less steric bulk. Nickel-catalyzed Kumada catalyst-transfer polycondensation of these Mg species provided a new class of side-chain regioregular and main-chain AB-type alternating poly(bichalcogenophene)s-PSSe, PSTe, and PSeTe-through a chain-growth mechanism. The ring-walking of the Ni catalyst from the lighter to the heavier chalcogenophene facilitated subsequent oxidative addition, thereby suppressing the possibility of chain-transfer or chain-termination. More significantly, the Ni catalyst could walk over the distance of three rings (ca. 1 nm)-from a thiophene unit via a selenophene unit to a tellurophene unit-to form PSSeTe, the first ABC-type regioregular and periodic poly(terchalcogenophene) comprising three different types of 3-hexylchalcogenophenes.

A mechanistic study of the activation of small molecules (H2 and C2H2) by group 14 analogues of selenophene

In this study, the reactivity influenced by group 14 elements (E = C, Si, Ge, Sn, and Pb), which are used as substituents in heterocyclic five-membered rings, was theoretically examined by using density functional theory (B3PW91/def2-SVP).

Narrow bandgap difluorobenzochalcogenadiazole-based polymers for high-performance organic thin-film transistors and polymer solar cells

A series of difluorobenzochalcogenadiazole-bithiophene copolymers are developed for high-performance organic semiconductors.

Photoactivity and optical applications of organic materials containing selenium and tellurium

Sulfur-containing compounds, particularly derivatives of thiophene, are well studied for organic optoelectronic applications. Incorporating selenium or tellurium in place of sulfur imparts different physical properties due to the fundamental differences of these atoms relative to their lighter analogues. This has a profound influence on the properties of molecules and materials that incorporate chalcogens that may ultimately lead to new opportunities and applications. This mini-review will focus on the quantitative and qualitative photophysical characteristics of organic materials containing selenium and tellurium as well as their emerging applications as molecular photoactive species, including light-emitting sensors, triplet sensitizers, and beyond.

The Synthesis and Optoelectronic Applications for Tellurophene-Based Small Molecules and Polymers

Tellurophene-based small molecules and polymers have received great attentions owing to their applications in thin-film transistors, solar cells, and sensors. This article reviews the current progress of the synthesis and applications of tellurophene-based small molecules and polymers. The physicochemical properties and optoelectronic applications of tellurophene-based materials are summarized and discussed. In the end, the challenges and outlook of tellurophene-based materials are presented.

Dithieno[3,2-b:2',3'-d]arsole-containing conjugated polymers in organic photovoltaic devices

Arsole-derived conjugated polymers are a relatively new class of materials in the field of organic electronics. Herein, we report the synthesis of two new donor polymers containing fused dithieno[3,2-b:2',3'-d]arsole units and report their application in bulk heterojunction solar cells for the first time. Devices based upon blends with PC₇₁BM display high open circuit voltages around 0.9 V and demonstrate power conversion efficiencies around 4%.

Naphthobisthiadiazole-Based Selenophene-Incorporated Quarterchalcogenophene Copolymers for Field-Effect Transistors and Polymer Solar Cells

In this research, we developed six new selenophene-incorporated naphthobisthiadiazole-based donor-acceptor polymers PNT2Th2Se-OD, PNT2Se2Th-OD, PNT4Se-OD, PNT2Th2Se-DT, PNT2Se2Th-DT, and PNT4Se-DT. The structure-property relationships have been systematically established through the comparison of their structural variations: (1) isomeric biselenophene/bithiophene arrangement between PNT2Th2Se and PNT2Se2Th polymers, (2) biselenophene/bithiophene and quarterselenophene donor units between PNT2Th2Se/PNT2Se2Th and PNT4Se polymers, and (3) side-chain modification between the 2-octyldodecylthiophene (OD)- and 2-decyltetradecyl (DT)-series polymers. The incorporation of selenophene units in the copolymers induces stronger charge transfer to improve the light-harvesting capability while maintaining the strong intermolecular interactions to preserve the intrinsic crystallinity for high carrier mobility. The organic field-effect transistor device using PNT2Th2Se-OD achieved a high hole mobility of 0.36 cm² V^-1 s^-1 with an on/off ratio of 1.9 × 10⁵. The solar cells with PNT2Th2Se-OD:PC₇₁BM exhibited a power conversion efficiency of 9.47% with a V_oc of 0.68 V, an fill factor of 67%, and an impressive J_sc of 20.69 mA cm^-2.

Furan-flanked diketopyrrolopyrrole-based chalcogenophene copolymers with siloxane hybrid side chains for organic field-effect transistors

Furan-flanked diketopyrrolopyrrole-based chalcogenophene copolymers are synthesized for the comprehensive study of the heterocyclic effect in organic field-effect transistors.

Cross-conjugated poly(selenylene vinylene)s

Poly(selenylene vinylene) (PSV) is a close analog to the extensively studied poly(thienylene vinylene) (PTV) polymers, and possesses unique properties originating from the larger, more polarizable Se atoms.

Probing non-covalent interactions driving molecular assembly in organo-electronic building blocks

One co-crystal structure characterized to identify and quantify various non-covalent interactions with spectroscopy, X-ray crystallography and density functional theory computations.

Electron transport behavior of quinoidal heteroacene-based junctions: effective electron-transport pathways and quantum interference

The electron transport behavior through a series of molecular junctions composed of tetracene (TC) and S/O substituted-TC (S/O-TC) has been studied using density functional theory (DFT) combined with the non-equilibrium Green's function (NEGF) method. The unique transport behavior has been interpreted using correlated quantum interference and electron transport pathway models. In the TC system, two dominant electron transfer channels exist as demonstrated by a detailed transmission pathway analysis. In the substituted S/O-TC systems, the electron transport behavior is regulated through either constructive or destructive quantum interference due to the existence of additional p-electrons, leading to a significant diversity of current-voltage curves. Compared to the TC molecule in the bias region from 0 to 1.0 V, an α-connected molecular junction exhibits a greater current, whereas a β-connected molecular junction shows a smaller current. The substitution with O and S atoms shows a minor effect on the conductance of the molecular junctions. In order to clarify the role of heteroatoms, a series of artificial models designed by removing specific sulfur and carbon atoms in α-S-TC have been investigated in detail. The results have demonstrated that only the S heteroatom on one side of the molecule contributes to the junction conductivity through constructive quantum interference. It has also been observed that current exchange occurs between the two electron transfer channels.

Self-Organization and Charge Transport Properties of Selenium and Tellurium Analogues of Polythiophene

A series of conjugated polymers comprising polythiophene, polyselenophene, and polytellurophene with branched 3,7-dimethyloctyl side chains, well-matched molecular weight, dispersity, and regioregularity is synthesized. The ionization potential is found to vary from 5.14 to 5.32 eV, with polytellurophene having the lowest potential. Field-effect transistors based on these materials exhibit distinct hole transport mobility that varies by nearly three orders of magnitude, with polytellurophene having the highest mobility (2.5 × 10^-2 cm² V^-1 s^-1 ). The large difference in mobility demonstrates the significant impact of heteroatom substitution. Although the series of polymers are very similar in structure, their solid-state properties are different. While the thin film microstructure of polythiophene and polyselenophene is identical, polytellurophene reveals globular features in the film topography. Polytellurophenes also appear to be the least crystalline, even though their charge transport properties are superior to other samples. The torsional barrier and degree of planarity between repeat units increase as one moves down group-16 elements. These studies show how a single atom in a polymer chain can have a substantial influence on the bulk properties of a material, and that heavy group-16 atoms have a positive influence on charge transport properties when all other variables are kept unchanged.

2,5-Digermaselenophenes: Germanium Analogues of Selenophenes

A stable crystalline 2,5-digermaselenophene was synthesized. In contrast to hitherto reported selenophenes, this digermaselenophene exhibits a trans-pyramidalized structure, which is due to its electronic properties. The practical utility of this 2,5-digermaselenophene is reflected in its ability to activate dihydrogen and acetylene at room temperature in the absence of a transition-metal complex, and this behavior can be rationalized on the basis of its physicochemical properties, which are characterized by considerable electron-donating and -accepting abilities.

Highly Luminescent Ladderized Fluorene Copolymers Based on B-N Lewis Pair Functionalization

A new B-N functionalized polyaromatic building block for conjugated hybrid polymers is developed. Bromine-functionalized dipyridylfluorene is first subjected to Lewis-base-directed electrophilic borylation and subsequently incorporated into conjugated polymers via transition-metal-catalyzed cross-coupling reactions. The borane monomer exhibits bright blue luminescence in solution, as a result of the rigid ladder-type structure generated upon electrophilic borylation. Yamamoto coupling gives rise to a homopolymer and Stille coupling to a vinylene-bridged copolymer. Polymerization of the BN-fused ladder molecules leads to large bathochromic shifts in absorption and emission, which are most pronounced for the vinylene-bridged copolymer. The polymers display strong luminescence in solution with quantum yields of 55% and 78% and sub-ns fluorescence lifetimes; the copolymer also exhibits bright yellow luminescence in the solid state when precipitated from solution.

From Monodisperse Thienyl- and Furylborane Oligomers to Polymers: Modulating the Optical Properties through the Hetarene Ratio

The application of our newly developed B-C coupling method by catalytic Si/B exchange is demonstrated for the synthesis of a series of triarylboranes (1), monodisperse thienyl- and furylborane dimers (2) and trimers (9), extended oligomers (3) and polymers (3'), as well as mixed (oligo)thienyl-/furylboranes. The structures of 1 aa^Tip , 1 bb^Tip , and 2 bbb^Mes* , determined by X-ray crystallography, reveal largely coplanar hetarene rings and BR₃ environments, which are most pronounced in the furylborane species. Photophysical investigations, supported by TD-DFT calculations, revealed pronounced π-electron delocalization over the hetarene backbones including the boron centers. With an extended series of derivatives of varying chain lengths available, we were able to determine the effective conjugation lengths (ECL) of poly(thienylborane)s and poly(furylborane)s, which have been reached with the highest-molecular-weight derivatives of our study. Through variation of the furan-to-thiophene ratio, the photophysical properties of these materials are effectively modulated. Significantly, higher furan contents lead to considerably increased fluorescence intensities. Compounds 1 aa^Tip , 1 bb^Tip , and 3 a^Tip showed the ability to bind fluoride anions. The binding process is signaled by a distinct change in their optical absorption characteristics, thus rendering these materials attractive targets for sensory applications.