Role of five-fold twin boundary on the enhanced mechanical properties of fcc Fe nanowires

Origin of the Rich Polymorphism of Gold in Penta-Twinned Nanoparticles

We report on the crystallographic structure of penta-twinned gold nanoparticles. Although gold typically exhibits a face-centered cubic (fcc) lattice, other phases have been reported in some nanoscale systems. We show that the crystallographic system and the lattice parameters of the gold unit cell strongly depend on the nanoparticle geometry, for a wide size range. Specifically, we show that decahedra exhibit a body-centered tetragonal structure (I4/mmm), whereas rods and bipyramids exhibit a body-centered orthorhombic structure (Immm). These changes in the crystallographic structure are explained by the elastic lattice distortions required to close the mismatch gap in penta-twinned nanoparticles, with respect to fcc single-crystal gold nanoparticles. The effects of nanoparticle shape and size on the surface pressure and the subsequent distortions are additionally discussed.

Enhanced Mechanical Properties in Bulk Nanograined Ni with High-Density Fivefold Twins

Fivefold twins are extensively present in nanoparticles and nanowires, enhancing their performance in physical, chemical, and mechanical properties. However, a deep insight into the correlation between mechanical properties and fivefold twins in bulk nanograined materials is lacking due to synthesis difficulties. Here, a bulk fivefold-twinned nanograined Ni is synthesized via electrodeposition. The fivefold-twinned nanograins typically feature decahedral and icosahedral shapes similar to fivefold-twinned particles. The material exhibits a yield strength of ≈1.7 GPa under both compression and tension. Tensile samples achieve an ultimate strength of 2.15 GPa with 15% elongation to failure. The plastic deformation is accommodated by partial dislocation sliding on twin boundaries, splitting fivefold twins, and abnormally refining grains. The size dependence of nucleation stress for partial dislocation is responsible for strengthening and strain hardening. The results showcase the potential of incorporating fivefold twins into bulk nanocrystalline materials to tailor mechanical properties and applications across diverse fields.

In situ atomic observations of aggregation growth and evolution of penta-twinned gold nanocrystals

The twin boundaries and inherent lattice strain of five-fold twin (5-FT) structures offer a promising and innovative approach to tune nanocrystal configurations and properties, enriching nanomaterial performance. However, a comprehensive understanding of the nonclassical growth models governing 5-FT nanocrystals remains elusive, largely due to the constraints of their small thermodynamically stable size and complex twin configurations. Here, we conducted in situ investigations to elucidate the atomic-scale mechanisms driving size-dependent and twin configuration-related aggregation phenomena between 5-FT and other nanoparticles at the atomic scale. Our results reveal that surface diffusion significantly shapes the morphology of aggregated nanoparticles, promoting the symmetrical formation of 5-FT, especially in smaller nanoparticles. Moreover, the inherent structural characteristics of 5-FT mitigate the dominance of surface diffusion in its morphological evolution, retarding the aggregation evolution process and fostering intricate twin structures. These findings contribute to advancing our capacity to manipulate the configuration of twinned particles, enabling more predictable synthesis of functional nanomaterials for advanced engineering applications.

Apparent symmetry rising induced by crystallization inhibition in ternary co-crystallization-driven self-assembly

The concept of apparent symmetry rising, opposite to symmetry breaking, was proposed to illustrate the unusual phenomenon that the symmetry of the apparent morphology of the multiply twinned particle is higher than that of its crystal structure. We developed a unique strategy of co-crystallization-driven self-assembly of amphiphilic block copolymers PEO-b-PS and the inorganic cluster silicotungstic acid to achieve apparent symmetry rising of nanoparticles under mild conditions. The triangular nanoplates triply twinned by orthogonal crystals (low symmetry) have an additional triple symmetry (high symmetry). The appropriate crystallization inhibition of short solvophilic segments of the block copolymers favors the oriented attachment of homogeneous domains of hybrid nanoribbons, and consequently forms kinetic-controlled triangular nanoplates with twin grain boundaries.

A New Structure with Localized sp2 Bonding for Fivefold Twinning in Diamond

Changes in atomic bonding configuration in carbon from sp3 to sp2 are known to exist in certain structural defects in diamond, such as twin boundaries, grain boundaries, and dislocations, which have a significant impact on many properties of diamond. In this work, the atomic structure of fivefold twinning in detonation synthesized ultra-dispersed diamonds is investigated using a combination of techniques, including spherical aberration-corrected high-resolution electron microscopy (HREM), HREM image simulations, and molecular mechanics (MM) calculations. The experimental HREM images reveal clearly that the fivefold twinning in diamond has two distinct structures. In addition to the concentric fivefold twins, where the core structure is the intersection of five {111} twinning boundaries, a new extended core structure with co-hybridization of bonding is identified and analyzed in fivefold twinning. The atomic structure forming these fivefold twinning boundaries and their respective core structures is proposed to involve both the tetrahedral sp3 and planar graphitic sp2 bonding configurations, in which a co-hybridized planar hexagon of carbon serves as a fundamental structural unit. The presence of this sp2 -bonded planar unit of hexagonal carbon rings in general grain boundaries is also discussed.

Thermal conductivity of fivefold twinned silicon-germanium heteronanowires

The thermal transport properties of five-fold twinned (5FT) germanium-silicon (Ge-Si) heteronanowires (h-NWs) with varying cross-sectional areas, germanium (Ge) domain ratios and heterostructural patterns are investigated using homogeneous nonequilibrium molecular dynamics (HNEMD) simulations. The results demonstrate a distinctive behavior in the thermal conductivity (κ) of 5FT-NWs, characterized by a "flipped" trend at a critical cross-sectional area. This behavior is attributed to the hydrodynamic phonon flow, arising from the normal three-phonon scattering process in the low-frequency region. In addition, the composition ratio of 5FT-NWs has a significant impact on reducing the κ of 5FT-NWs and suppressing the hydrodynamic effect. Intriguingly, as the homogeneous element domains are separated, stronger phonon hydrodynamic flows are observed in comparison to the adjacent homogeneous element domains. By analyzing various phonon properties, including phonon dispersion, three-phonon scattering rate, and phonon mean free path, critical insights into the origin of the differential κ in different 5FT-NW structures are provided. The findings deepen the understanding of the thermal transport properties of nanomaterials and hold implications for the design and development of nanoelectronics and thermoelectric devices.

Chemical inhomogeneity-induced profuse nanotwinning and phase transformation in AuCu nanowires

Nanosized metals usually exhibit ultrahigh strength but suffer from low homogeneous plasticity. The origin of a strength-ductility trade-off has been well studied for pure metals, but not for random solid solution (RSS) alloys. How RSS alloys accommodate plasticity and whether they can achieve synergy between high strength and superplasticity has remained unresolved. Here, we show that face-centered cubic (FCC) RSS AuCu alloy nanowires (NWs) exhibit superplasticity of ~260% and ultrahigh strength of ~6 GPa, overcoming the trade-off between strength and ductility. These excellent properties originate from profuse hexagonal close-packed (HCP) phase generation (2H and 4H phases), recurrence of reversible FCC-HCP phase transition, and zigzag-like nanotwin generation, which has rarely been reported before. Such a mechanism stems from the inherent chemical inhomogeneity, which leads to widely distributed and overlapping energy barriers for the concurrent activation of multiple plasticity mechanisms. This naturally implies a similar deformation behavior for other highly concentrated solid-solution alloys with multiple principal elements, such as high/medium-entropy alloys. Our findings shed light on the effect of chemical inhomogeneity on the plastic deformation mechanism of solid-solution alloys.

In Situ Atomic-Scale Observation of 5-Fold Twin Formation in Nanoscale Crystal under Mechanical Loading

A 5-fold twin is usually observed in nanostructured metals after mechanical tests and/or annealing treatment. However, the formation mechanism of a 5-fold twin has not been fully elaborated, due to the lack of direct time-resolved atomic-scale observation. Here, by using in situ nanomechanical testing combined with atomistic simulations, we show that sequential twinning slip in varying slip systems and decomposition of high-energy grain boundaries account for the 5-fold twin formation in a nanoscale gold single crystal under bending as well as the reversible formation and dissolution of a 5-fold twin in a nanocrystal with a preexisting twin under tension and shearing. Moreover, we find that the complex stress state in the neck area results in the breakdown of Schmid's law, causing 5-fold twin formation in a gold nanocrystal with a twin boundary parallel to the loading direction. These findings enrich our understanding of the formation process of high-order twin structures in nanostructured metals.

Entropically engineered formation of fivefold and icosahedral twinned clusters of colloidal shapes

Fivefold and icosahedral symmetries induced by multiply twinned crystal structures have been studied extensively for their role in influencing the shape of synthetic nanoparticles, and solution chemistry or geometric confinement are widely considered to be essential. Here we report the purely entropy-driven formation of fivefold and icosahedral twinned clusters of particles in molecular simulation without geometric confinement or chemistry. Hard truncated tetrahedra self-assemble into cubic or hexagonal diamond colloidal crystals depending on the amount of edge and vertex truncation. By engineering particle shape to achieve a negligible entropy difference between the two diamond phases, we show that the formation of the multiply twinned clusters is easily induced. The twinned clusters are entropically stabilized within a dense fluid by a strong fluid-crystal interfacial tension arising from strong entropic bonding. Our findings provide a strategy for engineering twinning behavior in colloidal systems with and without explicit bonding elements between particles.

Penta-Twin Destruction by Coordinated Twin Boundary Deformation

Penta-twinned nanomaterials often exhibit unique mechanical properties. However, the intrinsic deformation behavior of penta-twins remains largely unclear, especially under the condition of high shear stress. In this study, we show that the deformation of penta-twins often subject to a structural destruction via dislocation-mediated coordinated twin boundary (TB) deformation, resulting in a reconstructed pentagon-shaped core. This reconstructed core region is mainly induced by the coordinated TB migration along different directions (for the nucleation and growth) and accelerated by the TB sliding (for the growth). The destructed penta-twin core can effectively accommodate the intrinsic disclination of the penta-twin, which further collapses beyond a critical size, as predicted by an energy-based criterion. These intrinsic deformation behaviors of penta-twins would enable the possibility of controlling the morphology of penta-twinned nanomaterials with unique properties.

Visualizing the double-gyroid twin

Periodic gyroid network materials have many interesting properties (band gaps, topologically protected modes, superior charge and mass transport, and outstanding mechanical properties) due to the space-group symmetries and their multichannel triply continuous morphology. The three-dimensional structure of a twin boundary in a self-assembled polystyrene-b-polydimethylsiloxane (PS-PDMS) double-gyroid (DG) forming diblock copolymer is directly visualized using dual-beam scanning microscopy. The reconstruction clearly shows that the intermaterial dividing surface (IMDS) is smooth and continuous across the boundary plane as the pairs of chiral PDMS networks suddenly change their handedness. The boundary plane therefore acts as a topological mirror. The morphology of the normally chiral nodes and strut loops within the networks is altered in the twin-boundary plane with the formation of three new types of achiral nodes and the appearance of two new classes of achiral loops. The boundary region shares a very similar surface/volume ratio and distribution of the mean and Gaussian curvatures of the IMDS as the adjacent ordered DG grain regions, suggesting the twin is a low-energy boundary.

Comparison of microstructures and mechanical properties of 3 cobalt-chromium alloys fabricated with soft metal milling technology

STATEMENT OF PROBLEM

Although several manufacturers market soft metal milling blanks and systems, comprehensive comparative studies of differences in properties across commercially available soft metal milling alloys are lacking.

PURPOSE

The purpose of this in vitro study was to compare the microstructures and mechanical properties of 3 soft metal milling cobalt-chromium (Co-Cr) alloys (Ceramill Sintron, Soft Metal, and Sintermetall).

MATERIAL AND METHODS

Disk-shaped specimens (for surface characterization and hardness test) and dumbbell-shaped specimens (for tensile test as per International Organization for Standardization (ISO) 22674) were prepared by following each soft metal milling manufacturer's instructions. The crystal structures and microstructures of the 3 alloys were evaluated with optical microscopy, X-ray diffractometry (XRD), and scanning electron microscopy with electron backscattered diffraction (EBSD). The mechanical properties were investigated with a tensile test and Vickers hardness test (n=6). The results of the mechanical (tensile and hardness) tests were analyzed with 1-way ANOVA and the post hoc Tukey multiple comparison test (α=.05).

RESULTS

The Sintermetall specimen showed a finer microstructure and more porosity than the other 2 alloys. The XRD and EBSD analyses showed that the γ (face-centered cubic, fcc) matrix phase was predominant in the Ceramill Sintron alloy and the ε (hexagonal close-packed, hcp) matrix phase was predominant in the Soft Metal alloy. The Sintermetall alloy showed a slightly higher amount of ε phase than γ phase, with more chromium carbide formation than the other 2 alloys. The Ceramill Sintron alloy showed a significantly higher tensile strength than the other 2 alloys (P<.05), but a significantly lower 2% offset yield strength than the other 2 alloys (P<.05). The highest elongation was found in the Ceramill Sintron alloy, followed by the Sintermetall and Soft Metal alloys. The elastic modulus was the highest in the Sintermetall alloy, followed by the Soft Metal and Ceramill Sintron alloys. No significant differences in Vickers hardness values were detected among the 3 alloys (P=.263).

CONCLUSIONS

The different commercially available soft metal milling blanks and systems produced dissimilar alloys in terms of crystal structures and microstructures and, as a result, different mechanical properties.

A molecular dynamics study on the mechanical properties of Fe-Ni alloy nanowires and their temperature dependence

Fe–Ni alloy nanowires are widely used in high-density magnetic memories and catalysts due to their unique magnetic and electrochemical properties. Understanding the deformation mechanism and mechanical property of Fe–Ni alloy nanowires is of great importance for the development of devices. However, the detailed deformation mechanism of the alloy nanowires at different temperatures is unclear. Herein, the deformation mechanism of Fe–Ni alloy nanowires and their mechanical properties were investigated via the molecular dynamics simulation method. It was found that the local atomic pressure fluctuation of the Fe–Ni alloy nanowire surface became more prominent with an increase in the Ni content. At low temperature conditions (<50 K), the plastic deformation mechanism of the Fe–Ni alloy nanowires switched from the twinning mechanism to the dislocation slip mechanism with the increase in the Ni content from 0.5 at% to 8.0 at%. In the temperature range of 50–800 K, the dislocation slip mechanism dominated the deformation. Simulation results indicated that there was a significant linear relationship between the Ni content, temperature, and ultimate stress in the temperature range of 50–800 K. Our research revealed the association between the deformation mechanism and temperature in Fe–Ni alloy nanowires, which may facilitate new alloy nanowire designs.

Deformation mechanism and mechanical property of Fe–Ni alloy nanowires are investigated through molecular dynamics simulation method.

Abrupt elastic-to-plastic transition in pentagonal nanowires under bending

In this study, pentagonal Ag and Au nanowires (NWs) were bent in cantilever beam configuration inside a scanning electron microscope. We demonstrated an unusual, abrupt elastic-to-plastic transition, observed as a sudden change of the NW profile from smooth arc-shaped to angled knee-like during the bending in the narrow range of bending angles. In contrast to the behavior of NWs in the tensile and three-point bending tests, where extensive elastic deformation was followed by brittle fracture, in our case, after the abrupt plastic event, the NW was still far from fracture and enabled further bending without breaking. A possible explanation is that the five-fold twinned structure prevents propagation of critical defects, leading to dislocation pile up that may lead to sudden stress release, which is observed as an abrupt plastic event. Moreover, we found that if the NWs are coated with alumina, the abrupt plastic event is not observed and the NWs can withstand severe deformation in the elastic regime without fracture. The coating may possibly prevent formation of dislocations. Mechanical durability under high and inhomogeneous strain fields is an important aspect of exploiting Ag and Au NWs in applications like waveguiding or conductive networks in flexible polymer composite materials.

Oriented attachment induces fivefold twins by forming and decomposing high-energy grain boundaries

Natural and synthetic nanoparticles composed of fivefold twinned crystal domains have distinct properties. The formation mechanism of these fivefold twinned nanoparticles is poorly understood. We used in situ high-resolution transmission electron microscopy combined with molecular dynamics simulations to demonstrate that fivefold twinning occurs through repeated oriented attachment of ~3-nanometer gold, platinum, and palladium nanoparticles. We discovered two different mechanisms for forming fivefold twinned nanoparticles that are driven by the accumulation and elimination of strain. This was accompanied by decomposition of grain boundaries and the formation of a special class of twins with a net strain of zero. These observations allowed us to develop a quantitative picture of the twinning process. The mechanisms provide guidance for controlling twin structures and morphologies across a wide range of materials.

Length-dependent dual-mechanism-controlled failure modes in silver penta-twinned nanowires

A series of molecular dynamics simulations on silver penta-twinned nanowires are performed to reveal the tensile failure mechanisms that are responsible for the different failure modes and morphologies of fracture surfaces observed in various experimental reports. The simulations show that a ductile-to-brittle transition in failure mode occurs with increasing length of the nanowires. Short nanowires have ductile-like plasticity with flat-like fracture surfaces, while long nanowires show brittle-like fractures with cone-like failure surfaces. These two seemingly counterintuitive scenarios can be attributed to two sets of mechanisms: (1) stable dislocation nucleation-controlled incipient plasticity followed by stable dislocation motion-mediated plasticity assisted by pores for short nanowires, (2) unstable dislocation nucleation-controlled incipient plasticity followed by rapid necking for long nanowires. These two sets of failure mechanisms are distinguished by fitted lines using phased strain data. We propose a general strategy to build a necking-based model for predicting the critical nanowire aspect ratio while distinguishing the fracture modes. A mechanism map of silver penta-twinned nanowire is constructed to delineate the predominant failure behaviours. Our findings reveal a correlation between the failure mode and the resulting morphology of the fracture surface and provide a paradigm for the design and engineering of mechanical properties of nanowires.

Nature-inspired entwined coiled carbon mechanical metamaterials: molecular dynamics simulations

Entwining-induced robust natural biosystems show superior mechanical performances over their counterparts. However, the role played by topological entwinement in the mechanical properties of artificial nanohelixes remains unknown. Here, the tensile characteristics of nano-entwined carbon nanocoil (ECNC) metamaterials are explored by atomistic simulations. The simulation results show that ECNCs exhibit heterogeneous pre-stress distribution along the spiral surfaces. The predicted stretching stress-strain responses correlate with the topological nano-entwining and dimensionality. Topological analysis reveals that the collective stretching of the bond and bond angle on the inner hexagon edge of the coils characterizes both early and final elastic extensions, whereas the intermediate elasticity is exclusively attributed to the inner-edged hexagon-angular deformation. The ECNCs impart pronounced tensile stiffnesses to the native structures, surprisingly with a maximum of over 13-fold higher stiffness for one triple-helix, beyond the scalability of mechanical springs in parallel, originating from the nano-entwining mechanism and increase in bulkiness. However, the reinforcement in strengths is restricted by the elastic strain limits that are degraded in ECNCs owing to the steric hindrance effect. All metastructures show superelongation-at-break due to a successive break-vs.-arrest process. Upon plastic deformation, the localized reduction in the radii of ECNCs leads to the formation of carbyne-based networks.

The Mechanical Properties of Nanowires

Applications of nanowires into future generation nanodevices require a complete understanding of the mechanical properties of the nanowires. A great research effort has been made in the past two decades to understand the deformation physics and mechanical behaviors of nanowires, and to interpret the discrepancies between experimental measurements and theoretical predictions. This review focused on the characterization and understanding of the mechanical properties of nanowires, including elasticity, plasticity, anelasticity and strength. As the results from the previous literature in this area appear inconsistent, a critical evaluation of the characterization techniques and methodologies were presented. In particular, the size effects of nanowires on the mechanical properties and their deformation mechanisms were discussed.

Formation mechanism of fivefold deformation twins in a face-centered cubic alloy

The formation mechanism considers fivefold deformation twins originating from the grain boundaries in a nanocrystalline material, resulting in that fivefold deformation twins derived from a single crystal have not been reported by molecular dynamics simulations. In this study, fivefold deformation twins are observed in a single crystal of face-centered cubic (fcc) alloy. A new formation mechanism is proposed for fivefold deformation twins in a single crystal. A partial dislocation is emitted from the incoherent twin boundaries (ITBs) with high energy, generating a stacking fault along {111} plane, and resulting in the nucleating and growing of a twin by the successive emission of partials. A node is fixed at the intersecting center of the four different slip {111} planes. With increasing stress under the indentation, ITBs come into being close to the node, leading to the emission of a partial from the node. This generates a stacking fault along a {111} plane, nucleating and growing a twin by the continuous emission of the partials. This process repeats until the formation of fivefold deformation twins.

Study of the Mechanical Behavior of Radially Grown Fivefold Twinned Nanowires on the Atomic Scale

In situ bending tests and dynamic modeling simulations are for the first time revealing the mechanical behavior of copper nanowires (NW) with radially grown fivefold twin structures on the atomic scale. Combining the simulations with the experimental results it is shown that both the twin boundaries (TBs) and the twin center act as dislocation sources. TB migration and L-locks are readily observed in these types of radially grown fivefold-twin structures.

Seeded growth of ferrite nanoparticles from Mn oxides: observation of anomalies in magnetic transitions

Rich magnetism was observed in a series of magnetic nanoparticles prepared by seeded growth from Mn oxide nanoparticles.

Size-dependent elastic moduli and vibrational properties of fivefold twinned copper nanowires

Based on atomistic simulations, the elastic moduli and vibration behaviors of fivefold twinned copper nanowires are investigated in this paper. Simulation results show that the elastic (i.e., Young's and shear) moduli exhibit size dependence due to the surface effect. The effective Young's modulus is found to decrease slightly whereas the effective shear modulus increases slightly with the increase in the wire radius. Both moduli tend to approach certain values at a larger radius and can be suitably described by core-shell composite structure models. Furthermore, we show by comparing simulation results and continuum predictions that, provided the effective Young's and shear moduli are used, classic elastic theory can be applied to describe the small-amplitude vibration of fivefold twinned copper nanowires. Moreover, for the transverse vibration, the Timoshenko beam model is more suitable because shear deformation becomes apparent.

Tension-induced phase transition of single-layer molybdenum disulphide (MoS2) at low temperatures

We show that the hexagonal structure of single-layer molybdenum disulphide (MoS2), under uniaxial tension along a zigzag direction for large deformations, can transfer to a new quadrilateral structure by molecular dynamics (MD) simulations when the temperature is below 40 K. The new phase remains stable after unloading, even at room temperature. The Young's modulus of the new phase along the zigzag direction is about 2.5 times higher than that of normal MoS2. Checking against density functional theory calculations shows that the new phase is preserved and displays excellent electrical conductivity. Our results provide physical insights into the origins of the new phase transition of MoS2 at low temperatures.

Nanohinge-induced plasticity of helical carbon nanotubes

Helical carbon nanotubes with intentionally incorporated non-hexagonal defects have unexpectedly high toughness and plasticity, in addition to the well-recognized extreme elasticity. The obtained toughness approaches 5000 J g(-1) with decreasing spring radius. The high toughness originates from the plastic nanohinge formation as a result of distributed partial fractures. A strong spring size effect, contradictory to the continuum solution, is precisely described by an atomistic bond-breaking model.

Ordered and twinned structure in hexagonal-based potassium tungsten bronze nanosheets

Non-stoichiometric hexagonal-based potassium tungsten bronze (KxWO3) nanosheets were synthesized by oxidizing tungsten foil in potassium hydroxide. The tungsten bronze nanosheets exhibited an ordered monoclinic superstructure as revealed by X-ray diffraction patterns. Further detailed structural investigation by employing electron microscopy techniques showed the coexistence of 120° rotation twinning variants in the superstructure phase, which may result from the rotation symmetry reduction induced by the ordered arrangements of K vacancies during crystal growth.

Plasticity of Cu nanoparticles: Dislocation-dendrite-induced strain hardening and a limit for displacive plasticity

The plastic behaviour of individual Cu crystallites under nanoextrusion is studied by molecular dynamics simulations. Single-crystal Cu fcc nanoparticles are embedded in a spherical force field mimicking the effect of a contracting carbon shell, inducing pressure on the system in the range of gigapascals. The material is extruded from a hole of 1.1-1.6 nm radius under athermal conditions. Simultaneous nucleation of partial dislocations at the extrusion orifice leads to the formation of dislocation dendrites in the particle causing strain hardening and high flow stress of the material. As the extrusion orifice radius is reduced below 1.3 Å we observe a transition from displacive plasticity to solid-state amorphisation.